From: Neil Armstrong <neil.armstrong@linaro.org>
Date: Tue, 7 Feb 2023 15:07:54 +0000 (+0100)
Subject: arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=f88f3dcbb145a0133292d5c9d8da5935a36c8914;p=linux.git

arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name

Fixes the following bindings check error:
usb-hub: $nodename:0: 'usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-1-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index bb492581f1b70..e1683e0630b05 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -316,7 +316,7 @@
 	 * be handled by a USB specific power sequence to reset the Hub
 	 * when the USB bus is powered down.
 	 */
-	usb-hub {
+	usb-hub-hog {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;