From: Mikko Perttunen <mperttunen@nvidia.com>
Date: Wed, 20 Jun 2018 12:54:06 +0000 (+0300)
Subject: arm64: tegra: Add ethernet controller on Tegra194
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=f89b58ce71a949ca3592728b586d2077b6cc7ecc;p=linux.git

arm64: tegra: Add ethernet controller on Tegra194

The Tegra194 contains the same ethernet controller as the Tegra186.
Add the device tree node for it, and correspondingly the PHY node
on the board device tree.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---

diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 713fa3d735380..57d3f00464cea 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -27,6 +27,26 @@
 	};
 
 	cbb {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+
 		serial@3110000 {
 			status = "okay";
 		};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 20c30782049e1..2259a2b78afc7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -35,6 +35,28 @@
 			gpio-controller;
 		};
 
+		ethernet@2490000 {
+			compatible = "nvidia,tegra186-eqos",
+				     "snps,dwc-qos-ethernet-4.10";
+			reg = <0x02490000 0x10000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_AXI_CBB>,
+				 <&bpmp TEGRA194_CLK_EQOS_AXI>,
+				 <&bpmp TEGRA194_CLK_EQOS_RX>,
+				 <&bpmp TEGRA194_CLK_EQOS_TX>,
+				 <&bpmp TEGRA194_CLK_EQOS_PTP_REF>;
+			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+			resets = <&bpmp TEGRA194_RESET_EQOS>;
+			reset-names = "eqos";
+			status = "disabled";
+
+			snps,write-requests = <1>;
+			snps,read-requests = <3>;
+			snps,burst-map = <0x7>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <8>;
+		};
+
 		uarta: serial@3100000 {
 			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
 			reg = <0x03100000 0x40>;