From: Krzysztof Kozlowski Date: Tue, 25 Jul 2023 14:26:15 +0000 (+0200) Subject: arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=fcedb69be2700d5d07634bcdf06ca98e20a19677;p=linux.git arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios The recommended name for enable GPIOs property in regulator-gpio is enable-gpios. This is also required by bindings: rk3399-gru-bob.dtb: ppvar-sd-card-io: Unevaluated properties are not allowed ('enable-gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230725142616.157405-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 23bfba86daabe..c9bf1d5c3a426 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -250,7 +250,7 @@ pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>; enable-active-high; - enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; states = <1800000 0x1>, <3000000 0x0>;