From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 25 Jan 2019 03:23:13 +0000 (+0800)
Subject: ARM: dts: sun8i-q8-common: Enable display pipeline with RGB LCD panel
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=fe244e4c6a0b5acb2b2049fe792c538e70a0d10b;p=linux.git

ARM: dts: sun8i-q8-common: Enable display pipeline with RGB LCD panel

The Q8 design for A23/A33 tablets have an 18-bit RGB LCD panel connected
to the LCD interface on the SoC, the DC1SW output on the PMIC providing
power for the LCD, and PH7 toggling the reset pin for the panel.

This patch adds a device node for the panel, describing the above, and
enables the display pipeline.

The actual model or compatible string for the panel should be added in
the tablet device tree file.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---

diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 719ad769b8371..53104f4ccacc4 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -49,6 +49,26 @@
 		ethernet0 = &sdio_wifi;
 	};
 
+	panel: panel {
+		/* Tablet dts should provide panel compatible */
+		backlight = <&backlight>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_dc1sw>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		/*
@@ -64,6 +84,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status  = "okay";
 };
@@ -90,6 +114,19 @@
 	};
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };