From: Marcin Krzeminski Date: Thu, 14 Jul 2016 15:51:38 +0000 (+0100) Subject: m25p80: Fix QIOR/DIOR handling for Winbond X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=fe8477052831a78ba9de37d008bd81550bc8cf25;p=qemu.git m25p80: Fix QIOR/DIOR handling for Winbond Winbond also support continuous read mode, but as an opposite for other flash type read mode clock cycles are included to dummy cycles number. This path add proper handling of read mode byte and update needed dummy cycles. QPI mode and dummy cycles configuration are not supported. Signed-off-by: Marcin Krzeminski Reviewed-by: Cédric Le Goater Message-id: 1467809036-6986-1-git-send-email-marcin.krzeminski@nokia.com Signed-off-by: Peter Maydell --- diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index ca8c12c0f8..9828ee61d5 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -149,6 +149,7 @@ typedef struct FlashPartInfo { */ #define SPANSION_CONTINUOUS_READ_MODE_CMD_LEN 1 +#define WINBOND_CONTINUOUS_READ_MODE_CMD_LEN 1 static const FlashPartInfo known_devices[] = { /* Atmel -- some are (confusingly) marketed as "DataFlash" */ @@ -777,7 +778,7 @@ static void decode_dio_read_cmd(Flash *s) /* Dummy cycles modeled with bytes writes instead of bits */ switch (get_man(s)) { case MAN_WINBOND: - s->needed_bytes += 8; + s->needed_bytes += WINBOND_CONTINUOUS_READ_MODE_CMD_LEN; break; case MAN_SPANSION: s->needed_bytes += SPANSION_CONTINUOUS_READ_MODE_CMD_LEN; @@ -816,7 +817,8 @@ static void decode_qio_read_cmd(Flash *s) /* Dummy cycles modeled with bytes writes instead of bits */ switch (get_man(s)) { case MAN_WINBOND: - s->needed_bytes += 8; + s->needed_bytes += WINBOND_CONTINUOUS_READ_MODE_CMD_LEN; + s->needed_bytes += 4; break; case MAN_SPANSION: s->needed_bytes += SPANSION_CONTINUOUS_READ_MODE_CMD_LEN;