From: Manivannan Sadhasivam Date: Mon, 2 Jan 2023 10:58:21 +0000 (+0530) Subject: arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1 X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ff384ab56f164ef14bcc5f2bd79e995b4dea4bf3;p=linux.git arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1 Both PCIe0 and PCIe1 controllers are capable of signalling the MSIs received from endpoint devices to the CPU using GIC-ITS MSI controller. Add support for it. Currently, BDF (0:0.0) and BDF (1:0.0) are enabled and with the msi-map-mask of 0xff00, all the 32 devices under these two busses can share the same Device ID. The GIC-ITS MSI implementation provides an advantage over internal MSI implementation using Locality-specific Peripheral Interrupts (LPI) that would allow MSIs to be targeted for each CPU core. It should be noted that the MSIs for BDF (1:0.0) only works with Device ID of 0x5980 and 0x5a00. Hence, the IDs are swapped. Signed-off-by: Manivannan Sadhasivam Tested-by: Konrad Dybcio # Xperia 1 IV (WCN6855) Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230102105821.28243-4-manivannan.sadhasivam@linaro.org --- diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 70188e385d027..639146088f38d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1742,9 +1742,13 @@ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; + /* + * MSIs for BDF (1:0.0) only works with Device ID 0x5980. + * Hence, the IDs are swapped. + */ + msi-map = <0x0 &gic_its 0x5981 0x1>, + <0x100 &gic_its 0x5980 0x1>; + msi-map-mask = <0xff00>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ @@ -1851,9 +1855,13 @@ ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; + /* + * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. + * Hence, the IDs are swapped. + */ + msi-map = <0x0 &gic_its 0x5a01 0x1>, + <0x100 &gic_its 0x5a00 0x1>; + msi-map-mask = <0xff00>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */