From: Roger Shimizu Date: Thu, 21 Jan 2016 15:00:36 +0000 (+0900) Subject: ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ff61ee84e7aa5842d9e33c0b442f0b43a6a44eaf;p=linux.git ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl Here're a few gpio pin related fixes: - remove pinctrl-0 definition from pinctrl, since those pins are used in other places such as gpio-fan and regulators. - keep initial state of power led - fix for alarm pin of gpio-fan. Fixes: dc57844a736f ("ARM: dts: orion5x: add buffalo linkstation ls-wtgl") Signed-off-by: Roger Shimizu Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b4bf1..420788229e6f8 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu + * Copyright (C) 2015, 2016 + * Roger Shimizu * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds { @@ -162,6 +161,7 @@ led@1 { label = "lswtgl:blue:power"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@2 { @@ -188,7 +188,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff {