Take the gen12+ MC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
v2: Split RC CCS vs. MC CCS to separate patches
Cc: stable@vger.kernel.org Fixes: 2dfbf9d2873a ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine") Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-3-ville.syrjala@linux.intel.com
(cherry picked from commit 91c9651425fe955b1387f3637607dda005f3f710) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take the gen12+ RC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object") Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> # v5.4+ Link: https://patchwork.freedesktop.org/patch/msgid/20220705132546.2247677-1-niejianglei2021@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As it turns out: while Nvidia does actually have interlacing knobs on their
GPU still pretty much no current GPUs since Volta actually support it.
Trying interlacing on these GPUs will result in NVDisplay being quite
unhappy like so:
nouveau 0000:1f:00.0: disp: chid 0 stat 00004802 reason 4 [INVALID_ARG] mthd 2008 data 00000001 code 00080000
nouveau 0000:1f:00.0: disp: chid 0 stat 10005080 reason 5 [INVALID_STATE] mthd 0200 data 00000001 code 00000001
So let's fix this by following the same behavior Nvidia's driver does and
disable interlacing entirely.
In the greybus audio_helper code, the debugfs file for the dapm has the
potential to be removed and memory will be leaked. There is also the
very real potential for this code to remove ALL debugfs entries from the
system, and it seems like this is what will really happen if this code
ever runs. This all is very wrong as the greybus audio driver did not
create this debugfs file, the sound core did and controls the lifespan
of it.
So remove all of the debugfs logic from the audio_helper code as there's
no way it could be correct. If this really is needed, it can come back
with a fixup for the incorrect usage of the debugfs_lookup() call which
is what caused this to be noticed at all.
Deliberately truncate the exception error code when shoving it into the
VMCS (VM-Entry field for vmcs01 and vmcs02, VM-Exit field for vmcs12).
Intel CPUs are incapable of handling 32-bit error codes and will never
generate an error code with bits 31:16, but userspace can provide an
arbitrary error code via KVM_SET_VCPU_EVENTS. Failure to drop the bits
on exception injection results in failed VM-Entry, as VMX disallows
setting bits 31:16. Setting the bits on VM-Exit would at best confuse
L1, and at worse induce a nested VM-Entry failure, e.g. if L1 decided to
reinject the exception back into L2.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20220830231614.3580124-3-seanjc@google.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't propagate vmcs12's VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL to vmcs02.
KVM doesn't disallow L1 from using VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
even when KVM itself doesn't use the control, e.g. due to the various
CPU errata that where the MSR can be corrupted on VM-Exit.
Preserve KVM's (vmcs01) setting to hopefully avoid having to toggle the
bit in vmcs02 at a later point. E.g. if KVM is loading PERF_GLOBAL_CTRL
when running L1, then odds are good KVM will also load the MSR when
running L2.
Fixes: 8bf00a529967 ("KVM: VMX: add support for switching of PERF_GLOBAL_CTRL") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220830133737.1539624-18-vkuznets@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop pending exceptions and events queued for re-injection when leaving
nested guest mode, even if the "exit" is due to VM-Fail, SMI, or forced
by host userspace. Failure to purge events could result in an event
belonging to L2 being injected into L1.
This _should_ never happen for VM-Fail as all events should be blocked by
nested_run_pending, but it's possible if KVM, not the L1 hypervisor, is
the source of VM-Fail when running vmcs02.
SMI is a nop (barring unknown bugs) as recognition of SMI and thus entry
to SMM is blocked by pending exceptions and re-injected events.
Forced exit is definitely buggy, but has likely gone unnoticed because
userspace probably follows the forced exit with KVM_SET_VCPU_EVENTS (or
some other ioctl() that purges the queue).
Fixes: 4f350c6dbcb9 ("kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20220830231614.3580124-2-seanjc@google.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The emulator checks the wrong variable while setting the CPU
interruptibility state, the target segment is embedded in the instruction
opcode, not the ModR/M register. Fix the condition.
Signed-off-by: Michal Luczaj <mhal@rbox.co> Fixes: a5457e7bcf9a ("KVM: emulate: POP SS triggers a MOV SS shadow too") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20220821215900.1419215-1-mhal@rbox.co Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our test found a problem that wbt inflight counter is negative, which
will cause io hang(noted that this problem doesn't exist in mainline):
t1: device create t2: issue io
add_disk
blk_register_queue
wbt_enable_default
wbt_init
rq_qos_add
// wb_normal is still 0
/*
* in mainline, disk can't be opened before
* bdev_add(), however, in old kernels, disk
* can be opened before blk_register_queue().
*/
blkdev_issue_flush
// disk size is 0, however, it's not checked
submit_bio_wait
submit_bio
blk_mq_submit_bio
rq_qos_throttle
wbt_wait
bio_to_wbt_flags
rwb_enabled
// wb_normal is 0, inflight is not increased
wbt_queue_depth_changed(&rwb->rqos);
wbt_update_limits
// wb_normal is initialized
rq_qos_track
wbt_track
rq->wbt_flags |= bio_to_wbt_flags(rwb, bio);
// wb_normal is not 0，wbt_flags will be set
t3: io completion
blk_mq_free_request
rq_qos_done
wbt_done
wbt_is_tracked
// return true
__wbt_done
wbt_rqw_done
atomic_dec_return(&rqw->inflight);
// inflight is decreased
commit 8235b5c1e8c1 ("block: call bdev_add later in device_add_disk") can
avoid this problem, however it's better to fix this problem in wbt:
1) Lower kernel can't backport this patch due to lots of refactor.
2) Root cause is that wbt call rq_qos_add() before wb_normal is
initialized.
The busy status bit may never de-assert if number of programmed skip
bits is incorrect, resulting in a kernel hang because the bit is polled
endlessly in the code. Fix it by adding timeout for the bit-polling.
This problem is reproducible by setting the data_bit_offset field of
the HEVC slice params to a wrong value by userspace.
Cc: stable@vger.kernel.org Fixes: 7678c5462680 (media: cedrus: Fix decoding for some HEVC videos) Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cedrus_hw_resume() crashes with NULL deference on driver probe if
runtime PM is disabled because it uses platform data that hasn't been
set up yet. Fix this by setting the platform data earlier during probe.
Cc: stable@vger.kernel.org Fixes: 50e761516f2b (media: platform: Add Cedrus VPU decoder driver) Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Software that has run before the USB4 CM in Linux runs may have disabled
hotplug events for a given lane adapter.
Other CMs such as that one distributed with Windows 11 will enable hotplug
events. Do the same thing in the Linux CM which fixes hotplug events on
"AMD Pink Sardine".
Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem is that the synthetic event field "char file[]" will read
the value given to it as a string without any memory checks to make sure
the address is valid. The above example will pass in the user space
address and the sythetic event code will happily call strlen() on it
and then strscpy() where either one will cause an oops when accessing
user space addresses.
Use the helper functions from trace_kprobe and trace_eprobe that can
read strings safely (and actually succeed when the address is from user
space and the memory is mapped in).
Have the specific functions for kernel probes that read strings to inject
the "(fault)" name directly. trace_probes.c does this too (for uprobes)
but as the code to read strings are going to be used by synthetic events
(and perhaps other utilities), it simplifies the code by making sure those
other uses do not need to implement the "(fault)" name injection as well.
Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
are identical in both trace_kprobe.c and trace_eprobe.c. Move them into
a new header file trace_probe_kernel.h to share it. This code will later
be used by the synthetic events as well.
Marked for stable as a fix for a crash in synthetic events requires it.
Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a process is waiting on the ring buffer for data, there currently isn't
a clean way to force it to wake up. Add an ioctl call that will force any
tasks that are waiting on the trace_pipe_raw file to wake up.
Link: https://lkml.kernel.org/r/20220929095029.117f913f@gandalf.local.home Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When tracing is disabled, there's no reason that waiters should stay
waiting, wake them up, otherwise tasks get stuck when they should be
flushing the buffers.
Cc: stable@vger.kernel.org Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the file that represents the ring buffer is closed, there may be
waiters waiting on more input from the ring buffer. Call
ring_buffer_wake_waiters() to wake up any waiters when the file is
closed.
Link: https://lkml.kernel.org/r/20220927231825.182416969@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was found that some tracing functions in kernel/trace/trace.c acquire
an arch_spinlock_t with preemption and irqs enabled. An example is the
tracing_saved_cmdlines_size_read() function which intermittently causes
a "BUG: using smp_processor_id() in preemptible" warning when the LTP
read_all_proc test is run.
That can be problematic in case preemption happens after acquiring the
lock. Add the necessary preemption or interrupt disabling code in the
appropriate places before acquiring an arch_spinlock_t.
The convention here is to disable preemption for trace_cmdline_lock and
interupt for max_lock.
Link: https://lkml.kernel.org/r/20220922145622.1744826-1-longman@redhat.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: stable@vger.kernel.org Fixes: a35873a0993b ("tracing: Add conditional snapshot") Fixes: 939c7a4f04fc ("tracing: Introduce saved_cmdlines_size file") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ring buffer is broken up into sub buffers (currently of page size).
Each sub buffer has a pointer to its "tail" (the last event written to the
sub buffer). When a new event is requested, the tail is locally
incremented to cover the size of the new event. This is done in a way that
there is no need for locking.
If the tail goes past the end of the sub buffer, the process of moving to
the next sub buffer takes place. After setting the current sub buffer to
the next one, the previous one that had the tail go passed the end of the
sub buffer needs to be reset back to the original tail location (before
the new event was requested) and the rest of the sub buffer needs to be
"padded".
The race happens when a reader takes control of the sub buffer. As readers
do a "swap" of sub buffers from the ring buffer to get exclusive access to
the sub buffer, it replaces the "head" sub buffer with an empty sub buffer
that goes back into the writable portion of the ring buffer. This swap can
happen as soon as the writer moves to the next sub buffer and before it
updates the last sub buffer with padding.
Because the sub buffer can be released to the reader while the writer is
still updating the padding, it is possible for the reader to see the event
that goes past the end of the sub buffer. This can cause obvious issues.
To fix this, add a few memory barriers so that the reader definitely sees
the updates to the sub buffer, and also waits until the writer has put
back the "tail" of the sub buffer back to the last event that was written
on it.
To be paranoid, it will only spin for 1 second, otherwise it will
warn and shutdown the ring buffer code. 1 second should be enough as
the writer does have preemption disabled. If the writer doesn't move
within 1 second (with preemption disabled) something is horribly
wrong. No interrupt should last 1 second!
On closing of a file that represents a ring buffer or flushing the file,
there may be waiters on the ring buffer that needs to be woken up and exit
the ring_buffer_wait() function.
Add ring_buffer_wake_waiters() to wake up the waiters on the ring buffer
and allow them to exit the wait loop.
Link: https://lkml.kernel.org/r/20220928133938.28dc2c27@gandalf.local.home Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wake up waiters only checks the "wakeup_full" variable and not the
"full_waiters_pending". The full_waiters_pending is set when a waiter is
added to the wait queue. The wakeup_full is only set when an event is
triggered, and it clears the full_waiters_pending to avoid multiple calls
to irq_work_queue().
The irq_work callback really needs to check both wakeup_full as well as
full_waiters_pending such that this code can be used to wake up waiters
when a file is closed that represents the ring buffer and the waiters need
to be woken up.
Link: https://lkml.kernel.org/r/20220927231824.209460321@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic to know when the shortest waiters on the ring buffer should be
woken up or not has uses a less than instead of a greater than compare,
which causes the shortest_full to actually be the longest.
Link: https://lkml.kernel.org/r/20220927231823.718039222@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a page is partially read, and then the splice system call is run
against the ring buffer, it will always fail to read, no matter how much
is in the ring buffer. That's because the code path for a partial read of
the page does will fail if the "full" flag is set.
The splice system call wants full pages, so if the read of the ring buffer
is not yet full, it should return zero, and the splice will block. But if
a previous read was done, where the beginning has been consumed, it should
still be given to the splice caller if the rest of the page has been
written to.
This caused the splice command to never consume data in this scenario, and
let the ring buffer just fill up and lose events.
When executing following commands like what document said, but the log
"#### all functions enabled ####" was not shown as expect:
1. Set a 'mod' filter:
$ echo 'write*:mod:ext3' > /sys/kernel/tracing/set_ftrace_filter
2. Invert above filter:
$ echo '!write*:mod:ext3' >> /sys/kernel/tracing/set_ftrace_filter
3. Read the file:
$ cat /sys/kernel/tracing/set_ftrace_filter
By some debugging, I found that flag FTRACE_HASH_FL_MOD was not unset
after inversion like above step 2 and then result of ftrace_hash_empty()
is incorrect.
Link: https://lkml.kernel.org/r/20220926152008.2239274-1-zhengyejian1@huawei.com Cc: <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 8c08f0d5c6fb ("ftrace: Have cached module filters be an active filter") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KLP transition code depends on the TIF_PATCH_PENDING and
the task->patch_state to stay in sync. On a normal (forward)
transition, TIF_PATCH_PENDING will be set on every task in
the system, while on a reverse transition (after a failed
forward one) first TIF_PATCH_PENDING will be cleared from
every task, followed by it being set on tasks that need to
be transitioned back to the original code.
However, the fork code copies over the TIF_PATCH_PENDING flag
from the parent to the child early on, in dup_task_struct and
setup_thread_stack. Much later, klp_copy_process will set
child->patch_state to match that of the parent.
However, the parent's patch_state may have been changed by KLP loading
or unloading since it was initially copied over into the child.
This results in the KLP code occasionally hitting this warning in
klp_complete_transition:
Set, or clear, the TIF_PATCH_PENDING flag in the child task
depending on whether or not it is needed at the time
klp_copy_process is called, at a point in copy_process where the
tasklist_lock is held exclusively, preventing races with the KLP
code.
The KLP code does have a few places where the state is changed
without the tasklist_lock held, but those should not cause
problems because klp_update_patch_state(current) cannot be
called while the current task is in the middle of fork,
klp_check_and_switch_task() which is called under the pi_lock,
which prevents rescheduling, and manipulation of the patch
state of idle tasks, which do not fork.
This should prevent this warning from triggering again in the
future, and close the race for both normal and reverse transitions.
Signed-off-by: Rik van Riel <riel@surriel.com> Reported-by: Breno Leitao <leitao@debian.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Fixes: d83a7cb375ee ("livepatch: change to a per-task consistency model") Cc: stable@kernel.org Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220808150019.03d6a67b@imladris.surriel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions'
when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size'
after 'state->fc_regions' is allocated successfully.
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As krealloc may return NULL, in this case 'state->fc_regions' may not be
freed by krealloc, but 'state->fc_regions' already set NULL. Then will
lead to 'state->fc_regions' memory leak.
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220921064040.3693255-3-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak.
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220921064040.3693255-2-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following process may lead to fs corruption:
1. ext4_create(dir/foo)
ext4_add_nondir
ext4_add_entry
ext4_dx_add_entry
a. add_dirent_to_buf
ext4_mark_inode_dirty
ext4_handle_dirty_metadata // dir inode bh is recorded into journal
b. ext4_append // dx_get_count(entries) == dx_get_limit(entries)
ext4_bread(EXT4_GET_BLOCKS_CREATE)
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
dquot_alloc_block
dquot_alloc_space_nodirty
inode_add_bytes // update dir's i_blocks
ext4_ext_insert_extent
ext4_ext_dirty // record extent bh into journal
ext4_handle_dirty_metadata(bh)
// record new block into journal
inode->i_size += inode->i_sb->s_blocksize // new size(in mem)
c. ext4_handle_dirty_dx_node(bh2)
// record dir's new block(dx_node) into journal
d. ext4_handle_dirty_dx_node((frame - 1)->bh)
e. ext4_handle_dirty_dx_node(frame->bh)
f. do_split // ret err!
g. add_dirent_to_buf
ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped)
2. fsck -a /dev/sdb
drop last block(dx_node) which beyonds dir's i_size.
/dev/sdb: recovering journal
/dev/sdb contains a file system with errors, check forced.
/dev/sdb: Inode 12, end of extent exceeds allowed value
(logical block 128, physical block 3938, len 1)
3. fsck -fn /dev/sdb
dx_node->entry[i].blk > dir->i_size
Pass 2: Checking directory structure
Problem in HTREE directory inode 12 (/dir): bad block number 128.
Clear HTree index? no
Problem in HTREE directory inode 12: block #3 has invalid depth (2)
Problem in HTREE directory inode 12: block #3 has bad max hash
Problem in HTREE directory inode 12: block #3 not referenced
Fix it by marking inode dirty directly inside ext4_append().
Fetch a reproducer in [Link].
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit 88dbcbb3a484
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.
This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.
Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.
Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes: 65f8ea4cd57d ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184 CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak.
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220917093805.1782845-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count
which may lead to use-after-free.
So judge buffer if uptodate before put buffer head reference count.
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220914100812.1414768-3-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO.
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220914100812.1414768-2-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.
Currently under Clang, CC_HAS_AUTO_VAR_INIT_ZERO requires an extra
-enable flag compared to CC_HAS_AUTO_VAR_INIT_PATTERN. GCC 12[1] will
not, and will happily ignore the Clang-specific flag. However, its
presence on the command-line is both cumbersome and confusing. Due to
GCC's tolerant behavior, though, we can continue to use a single Kconfig
cc-option test for the feature on both compilers, but then drop the
Clang-specific option in the Makefile.
In other words, this patch does not change anything other than making the
compiler command line shorter once GCC supports -ftrivial-auto-var-init=zero.
BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs]
Read of size 4 at addr ffff8881464dcd80 by task mount/1013
CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x5e
print_report.cold+0xf3/0x68d
kasan_report+0xa8/0x130
recover_data+0x63ae/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node
is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size
page.
If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.
The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.
This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.
Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit 55c69072d6bd5be1 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").
Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.
Reported-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/ CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.
The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.
Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.
Thanks Jan Kara for suggestions on how to make this work properly.
Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: stable@kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A kernel daemon should not rely on the current thread, which is unknown
and might be malicious. Before this security fix,
ksmbd_override_fsids() didn't correctly override FS UID/GID which means
that arbitrary user space threads could trick the kernel to impersonate
arbitrary users or groups for file system access checks, leading to
file system access bypass.
This was found while investigating truncate support for Landlock:
https://lore.kernel.org/r/CAKYAXd8fpMJ7guizOjHgxEyyjoUwPsx3jLOPZP=wPYcbhkVXqA@mail.gmail.com
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: Hyunchul Lee <hyc.lee@gmail.com> Cc: Steve French <smfrench@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20220929100447.108468-1-mic@digikod.net Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c7803b05f74b ("smb3: fix ksmbd bigendian bug in oplock
break, and move its struct to smbfs_common") use the defination
of 'struct validate_negotiate_info_req' in smbfs_common, the
array length of 'Dialects' changed from 1 to 4, but the protocol
does not require the client to send all 4. This lead the request
which satisfied with protocol and server to fail.
So just ensure the request payload has the 'DialectCount' in
smb2_ioctl(), then fsctl_validate_negotiate_info() will use it
to validate the payload length and each dialect.
Also when the {in, out}_buf_len is less than the required, should
goto out to initialize the status in the response header.
Fixes: f7db8fd03a4b ("ksmbd: add validation in smb2_ioctl") Cc: stable@vger.kernel.org Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ->encrypt_resp return error, goto statement cause endless loop.
It send an error response immediately after removing it.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's re-implement the pinmux_ops.gpio_set_direction callback so that
the gpio subsystem can request from the pinctrl driver to put the pin in
its GPIO function.
Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Cc: stable@vger.kernel.org Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220930132033.4003377-2-foss+kernel@0leil.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's call pinctrl_gpio_direction_input/output when setting the
direction of a GPIO so that the pinctrl core requests from the rockchip
pinctrl driver to put the pin in its GPIO function.
Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Cc: stable@vger.kernel.org Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.
Remove the SPR dram_domain_energy_unit quirk.
Fixes: 2d798d9f5967 ("powercap: intel_rapl: add support for Sapphire Rapids") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Wang Wendy <wendy.wang@intel.com> Cc: 5.9+ <stable@vger.kernel.org> # 5.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply message at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Thanks to Aleksi Illikainen and Kari Hulkko for uncovering this
issue.
Reported-by: Ben Ronallo <Benjamin.Ronallo@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to
operate in the enhanced mode via the EFR register for the Divide-by-M
N/8 baud rate generator prescaler to be used in their native UART mode.
Otherwise the prescaler is fixed at 1 causing grossly incorrect baud
rates to be programmed.
Accessing the EFR register requires 16550A features to have been probed
for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS
by setting UPF_FULL_PROBE in port flags.
Fixes: 366f6c955d4d ("serial: 8250: Add proper clock handling for OxSemi PCIe devices") Cc: stable@vger.kernel.org # v5.19+ Reported-by: Anders Blomdell <anders.blomdell@control.lth.se> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210005040.41633@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A SERIAL_8250_16550A_VARIANTS configuration option has been recently
defined that lets one request the 8250 driver not to probe for 16550A
device features so as to reduce the driver's device startup time in
virtual machines.
Some actual hardware devices require these features to have been fully
determined however for their driver to work correctly, so define a flag
to let drivers request full 16550A feature probing on a device-by-device
basis if required regardless of the SERIAL_8250_16550A_VARIANTS option
setting chosen.
Fixes: dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants") Cc: stable@vger.kernel.org # v5.6+ Reported-by: Anders Blomdell <anders.blomdell@control.lth.se> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209202357520.41633@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.
This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:
pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:06:08.0: USB UHCI 1.1
pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.1: USB UHCI 1.1
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable). Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: no space for bridge window [io size 0x2000]
pci 0000:02:02.0: no space for bridge window [io size 0x1000]
pci 0000:05:00.0: no space for bridge window [io size 0x1000]
pci 0000:06:08.0: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff]
A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released
pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone
pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f]
...
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up
If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.
Prior to this commit, the gntdev driver code did not handle the
following scenario correctly with paravirtualized (PV) Xen domains:
* User process sets up a gntdev mapping composed of two grant mappings
(i.e., two pages shared by another Xen domain).
* User process munmap()s one of the pages.
* User process munmap()s the remaining page.
* User process exits.
In the scenario above, the user process would cause the kernel to log
the following messages in dmesg for the first munmap(), and the second
munmap() call would result in similar log messages:
For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG)
would print out the following and trigger a general protection fault in
the affected Xen PV domain:
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
As of this writing, gntdev_grant_map structure's vma field (referred to
as map->vma below) is mainly used for checking the start and end
addresses of mappings. However, with split VMAs, these may change, and
there could be more than one VMA associated with a gntdev mapping.
Hence, remove the use of map->vma and rely on map->pages_vm_start for
the original start address and on (map->count << PAGE_SHIFT) for the
original mapping size. Let the invalidate() and find_special_page()
hooks use these.
Also, given that there can be multiple VMAs associated with a gntdev
mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to
the end of gntdev_put_map, so that the MMU notifier is only removed
after the closing of the last remaining VMA.
Finally, use an atomic to prevent inadvertent gntdev mapping re-use,
instead of using the map->live_grants atomic counter and/or the map->vma
pointer (the latter of which is now removed). This prevents the
userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the
same address range as a previously set up gntdev mapping. This scenario
can be summarized with the following call-trace, which was valid prior
to this commit:
mmap
gntdev_mmap
mmap (repeat mmap with MAP_FIXED over the same address range)
gntdev_invalidate
unmap_grant_pages (sets 'being_removed' entries to true)
gnttab_unmap_refs_async
unmap_single_vma
gntdev_mmap (maps the shared pages again)
munmap
gntdev_invalidate
unmap_grant_pages
(no-op because 'being_removed' entries are true)
unmap_single_vma (For PV domains, Xen reports that a granted page
is being unmapped and triggers a general protection fault in the
affected domain, if Xen was built with CONFIG_DEBUG)
The fix for this last scenario could be worth its own commit, but we
opted for a single commit, because removing the gntdev_grant_map
structure's vma field requires guarding the entry to gntdev_mmap(), and
the live_grants atomic counter is not sufficient on its own to prevent
the mmap() over a pre-existing mapping.
Prior to this commit, if a grant mapping operation failed partially,
some of the entries in the map_ops array would be invalid, whereas all
of the entries in the kmap_ops array would be valid. This in turn would
cause the following logic in gntdev_map_grant_pages to become invalid:
for (i = 0; i < map->count; i++) {
if (map->map_ops[i].status == GNTST_okay) {
map->unmap_ops[i].handle = map->map_ops[i].handle;
if (!use_ptemod)
alloced++;
}
if (use_ptemod) {
if (map->kmap_ops[i].status == GNTST_okay) {
if (map->map_ops[i].status == GNTST_okay)
alloced++;
map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
}
}
}
...
atomic_add(alloced, &map->live_grants);
Assume that use_ptemod is true (i.e., the domain mapping the granted
pages is a paravirtualized domain). In the code excerpt above, note that
the "alloced" variable is only incremented when both kmap_ops[i].status
and map_ops[i].status are set to GNTST_okay (i.e., both mapping
operations are successful). However, as also noted above, there are
cases where a grant mapping operation fails partially, breaking the
assumption of the code excerpt above.
The aforementioned causes map->live_grants to be incorrectly set. In
some cases, all of the map_ops mappings fail, but all of the kmap_ops
mappings succeed, meaning that live_grants may remain zero. This in turn
makes it impossible to unmap the successfully grant-mapped pages pointed
to by kmap_ops, because unmap_grant_pages has the following snippet of
code at its beginning:
if (atomic_read(&map->live_grants) == 0)
return; /* Nothing to do */
In other cases where only some of the map_ops mappings fail but all
kmap_ops mappings succeed, live_grants is made positive, but when the
user requests unmapping the grant-mapped pages, __unmap_grant_pages_done
will then make map->live_grants negative, because the latter function
does not check if all of the pages that were requested to be unmapped
were actually unmapped, and the same function unconditionally subtracts
"data->count" (i.e., a value that can be greater than map->live_grants)
from map->live_grants. The side effects of a negative live_grants value
have not been studied.
The net effect of all of this is that grant references are leaked in one
of the above conditions. In Qubes OS v4.1 (which uses Xen's grant
mechanism extensively for X11 GUI isolation), this issue manifests
itself with warning messages like the following to be printed out by the
Linux kernel in the VM that had granted pages (that contain X11 GUI
window data) to dom0: "g.e. 0x1234 still pending", especially after the
user rapidly resizes GUI VM windows (causing some grant-mapping
operations to partially or completely fail, due to the fact that the VM
unshares some of the pages as part of the window resizing, making the
pages impossible to grant-map from dom0).
The fix for this issue involves counting all successful map_ops and
kmap_ops mappings separately, and then adding the sum to live_grants.
During unmapping, only the number of successfully unmapped grants is
subtracted from live_grants. The code is also modified to check for
negative live_grants values after the subtraction and warn the user.
Commit c462ac288f2c ("mm: Introduce arch_validate_flags()") added a late
check in mmap_region() to let architectures validate vm_flags. The check
needs to happen after calling ->mmap() as the flags can potentially be
modified during this callback.
If arch_validate_flags() check fails we unmap and free the vma. However,
the error path fails to undo the ->mmap() call that previously succeeded
and depending on the specific ->mmap() implementation this translates to
reference increments, memory allocations and other operations what will
not be cleaned up.
There are several places (mainly device drivers) where this is an issue.
However, one specific example is bpf_map_mmap() which keeps count of the
mappings in map->writecnt. The count is incremented on ->mmap() and then
decremented on vm_ops->close(). When arch_validate_flags() fails this
count is off since bpf_map_mmap_close() is never called.
One can reproduce this issue in arm64 devices with MTE support. Here the
vm_flags are checked to only allow VM_MTE if VM_MTE_ALLOWED has been set
previously. From userspace then is enough to pass the PROT_MTE flag to
mmap() syscall to trigger the arch_validate_flags() failure.
By manually adding some log statements to the vm_ops callbacks we can
confirm that when passing PROT_MTE to mmap() the map->writecnt is off upon
->release():
This patch fixes the above issue by calling vm_ops->close() when the
arch_validate_flags() check fails, after this we can proceed to unmap and
free the vma on the error path.
pmd_huge() is used to validate if the pmd entry is mapped by a huge page,
also including the case of non-present (migration or hwpoisoned) pmd entry
on arm64 or x86 architectures. This means that pmd_pfn() can not get the
correct pfn number for a non-present pmd entry, which will cause
damon_get_page() to get an incorrect page struct (also may be NULL by
pfn_to_online_page()), making the access statistics incorrect.
This means that the DAMON may make incorrect decision according to the
incorrect statistics, for example, DAMON may can not reclaim cold page
in time due to this cold page was regarded as accessed mistakenly if
DAMOS_PAGEOUT operation is specified.
Moreover it does not make sense that we still waste time to get the page
of the non-present entry. Just treat it as not-accessed and skip it,
which maintains consistency with non-present pte level entries.
So add pmd entry present validation to fix the above issues.
Link: https://lkml.kernel.org/r/58b1d1f5fbda7db49ca886d9ef6783e3dcbbbc98.1660805030.git.baolin.wang@linux.alibaba.com Fixes: 3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: SeongJae Park <sj@kernel.org> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cortex-A55 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Restore the display mode whne resuming from suspend. Currently, the
display remains dark.
On resume, the CRTC's mode does not change, but the 'active' flag
changes to 'true'. Taking this into account when considering a mode
switch restores the display mode.
The bug is reproducable by using Gnome with udl and observing the
adapter's suspend/resume behavior.
Actually, the whole check added in udl_simple_display_pipe_enable()
about the crtc_state->mode_changed was bogus. We should drop the
whole check and always apply the mode change in this function.
[ tiwai -- Drop the mode_changed check entirely instead, per Daniel's
suggestion ]
Fixes: 997d33c35618 ("drm/udl: Inline DPMS code into CRTC enable and disable functions") Cc: <stable@vger.kernel.org> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-2-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make virtio_gpu_plane_cleanup_fb() to clean the state which DRM core
wants to clean up and not the current plane's state. Normally the older
atomic state is cleaned up, but the newer state could also be cleaned up
in case of aborted commits.
Unlock reservations in the error code path of virtio_gpu_object_create()
to silence debug warning splat produced by ww_mutex_destroy(&obj->lock)
when GEM is released with the held lock.
Driver registration fails on SOC imx8mn as its supplier, the clock
control module, is probed later than subsys initcall level. This driver
uses platform_driver_probe which is not compatible with deferred probing
and won't be probed again later if probe function fails due to clock not
being available at that time.
This patch replaces the use of platform_driver_probe with
platform_driver_register which will allow probing the driver later again
when the clock control module will be available.
The __init annotation has been dropped because it is not compatible with
deferred probing. The code is not executed once and its memory cannot be
freed.
Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28") Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220921170556.1055962-1-dario.binacchi@amarulasolutions.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device. Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.
When we revalidate paths as part of ns size change (as of commit e7d65803e2bb), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
dev_set_name will alloc memory for nvmem->dev.kobj.name in
nvmem_register, when nvmem_validate_keepouts failed, nvmem's
memory will be freed and return, but nobody will free memory
for nvmem->dev.kobj.name, there will be memleak, so moving
nvmem_validate_keepouts() after device_register() and let
the device core deal with cleaning name in error cases.
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
lld since llvm:6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation. -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:
ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax
but the .o is already compiled with -mno-relax
When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by
CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be
used regardless of the result of device tree scanning.
This especially fixes the case where a device tree without the
chosen node is supplied to the kernel. In such cases,
early_init_dt_scan would return true. But inside
early_init_dt_scan_chosen, the cmdline won't be updated as there
is no chosen node in the device tree. As a result, CONFIG_CMDLINE
is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE
is enabled. This commit allows properly update boot_command_line
in this situation.
Fixes: 8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed") Signed-off-by: Wenting Zhang <zephray@outlook.com> Reviewed-by: Björn Töpel <bjorn@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB3991.apcprd04.prod.outlook.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RISC-V does not presently have write-only mappings as that PTE bit pattern
is considered reserved in the privileged spec, so allow handling of read
faults in VMAs that have VM_WRITE without VM_READ in order to be consistent
with other architectures that have similar limitations.
Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout
PROT_READ with the justification that a write-only PTE is considered a
reserved PTE permission bit pattern in the privileged spec. This check
is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is
inconsistent with other architectures that don't support write-only PTEs,
creating a potential software portability issue. Just remove the check
altogether and let PROT_WRITE imply PROT_READ as is the case on other
architectures.
Note that this also allows PROT_WRITE|PROT_EXEC mappings which were
disallowed prior to the aforementioned commit; PROT_READ is implied in
such mappings as well.
Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: fab957c11efe2 ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.
On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:
arm64's method of defining a default cpu topology requires only minimal
changes to apply to RISC-V also. The current arm64 implementation exits
early in a uniprocessor configuration by reading MPIDR & claiming that
uniprocessor can rely on the default values.
This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64:
topology: Stop using MPIDR for topology information")', because the
current code just assigns default values for multiprocessor systems.
With the MPIDR references removed, store_cpu_topolgy() can be moved to
the common arch_topology code.
On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.
See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:
Fix this by moving the PM8058 S-regulators first in the array.
Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.
Fixes: 087a1b5cdd55 ("regulator: qcom: Rework to single platform device") Cc: stable@vger.kernel.org Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the other host starts sending packets early on it is possible that we
are still in the middle of populating the initial Rx ring packets to the
ring. This causes the tbnet_poll() to mess over the queue and causes
list corruption. This happens specifically when connected with macOS as
it seems start sending various IP discovery packets as soon as its side
of the paths are configured.
To prevent this we move the DMA path enabling to happen after we have
primed the Rx ring. This makes sure no incoming packets can arrive
before we are ready to handle them.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
projects / linux.git / log