Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging

First RISC-V PR for QEMU 8.0

* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups

# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
  hw/intc: sifive_plic: Fix the pending register range check
  hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
  hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
  hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
  hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
  hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
  hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
  hw/intc: sifive_plic: Update "num-sources" property default value
  hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
  hw/intc: sifive_plic: Improve robustness of the PLIC config parser
  hw/intc: sifive_plic: Drop PLICMode_H
  hw/riscv: spike: Remove misleading comments
  hw/riscv: Sort machines Kconfig options in alphabetical order
  hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
  hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
  hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
  RISC-V: Add Zawrs ISA extension support
  target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
  target/riscv: Simplify helper_sret() a little bit
  target/riscv: Set pc_succ_insn for !rvc illegal insn
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into staging

Fix race conditions in new user-only vma tracking.
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.

# gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits)
  tests/tcg/multiarch: add vma-pthread.c
  accel/tcg: Handle false negative lookup in page_check_range
  accel/tcg: Use g_free_rcu for user-exec interval trees
  accel/tcg: Fix tb_invalidate_phys_page_unwind
  tcg: Add TCGHelperInfo argument to tcg_out_call
  tcg/aarch64: Merge tcg_out_callr into tcg_out_call
  tcg: Move ffi_cif pointer into TCGHelperInfo
  tcg: Factor init_ffi_layouts() out of tcg_context_init()
  tcg: Convert typecode_to_ffi from array to function
  tcg: Reorg function calls
  tcg: Use output_pref wrapper function
  tcg: Vary the allocation size for TCGOp
  tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()
  accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb
  accel/tcg/plugin: Avoid duplicate copy in copy_call
  accel/tcg/plugin: Don't search for the function pointer index
  tcg: Use TCG_CALL_ARG_EVEN for TCI special case
  tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32
  tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64
  tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-hex-20230105' of https://github.com/quic/qemu into staging

Hexagon update: patches from several folks

# gpg: Signature made Thu 05 Jan 2023 17:35:27 GMT
# gpg:                using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* tag 'pull-hex-20230105' of https://github.com/quic/qemu:
  Update scripts/meson-buildoptions.sh
  Hexagon (target/hexagon) implement mutability mask for GPRs
  target/hexagon: suppress unused variable warning
  target/hexagon/idef-parser: fix two typos in README
  tests/tcg/hexagon: fix underspecifed asm constraints
  target/hexagon: rename aliased register HEX_REG_P3_0
  linux-user/hexagon: fix signal context save & restore

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc: sifive_plic: Fix the pending register range check

The pending register upper limit is currently set to
plic->num_sources >> 3, which is wrong, e.g.: considering
plic->num_sources is 7, the upper limit becomes 0 which fails
the range check if reading the pending register at pending_base.

Fixes: 1e24429e40df ("SiFive RISC-V PLIC Block")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-16-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization

"hartid-base" and "priority-base" are zero by default. There is no
need to initialize them to zero again.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-15-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0

At present the SiFive PLIC model "priority-base" expects interrupt
priority register base starting from source 1 instead source 0,
that's why on most platforms "priority-base" is set to 0x04 except
'opentitan' machine. 'opentitan' should have set "priority-base"
to 0x04 too.

Note the irq number calculation in sifive_plic_{read,write} is
correct as the codes make up for the irq number by adding 1.

Let's simply update "priority-base" to start from interrupt source
0 and add a comment to make it crystal clear.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-14-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb

Commit 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
changed the value of VIRT_IRQCHIP_NUM_SOURCES from 127 to 53, which
is VIRTIO_NDEV and also used as the value of "riscv,ndev" property
in the dtb. Unfortunately this is wrong as VIRT_IRQCHIP_NUM_SOURCES
should include interrupt source 0 but "riscv,ndev" does not.

While we are here, we also fix the comments of platform bus irq range
which is now "64 to 96", but should be "64 to 95", introduced since
commit 1832b7cb3f64 ("hw/riscv: virt: Create a platform bus").

Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"

At present magic number is used to create "riscv,ndev" property
in the dtb. Let's use the macro SIFIVE_U_PLIC_NUM_SOURCES that
is used to instantiate the PLIC model instead.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC

Per chapter 10 in Freedom E310 manuals [1][2][3], E310 G002 and G003
supports 52 interrupt sources while G000 supports 51 interrupt sources.

We use the value of G002 and G003, so it is 53 (including source 0).

[1] G000 manual:
https://sifive.cdn.prismic.io/sifive/4faf3e34-4a42-4c2f-be9e-c77baa4928c7_fe310-g000-manual-v3p2.pdf

[2] G002 manual:
https://sifive.cdn.prismic.io/sifive/034760b5-ac6a-4b1c-911c-f4148bb2c4a5_fe310-g002-v1p5.pdf

[3] G003 manual:
https://sifive.cdn.prismic.io/sifive/3af39c59-6498-471e-9dab-5355a0d539eb_fe310-g003-manual.pdf

Fixes: eb637edb1241 ("SiFive Freedom E Series RISC-V Machine")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-11-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC

Per chapter 6.5.2 in [1], the number of interupt sources including
interrupt source 0 should be 187.

[1] PolarFire SoC MSS TRM:
https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/ReferenceManuals/PolarFire_SoC_FPGA_MSS_Technical_Reference_Manual_VC.pdf

Fixes: 56f6e31e7b7e ("hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221211030829.802437-10-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: sifive_plic: Update "num-sources" property default value

At present the default value of "num-sources" property is zero,
which does not make a lot of sense, as in sifive_plic_realize()
we see s->bitfield_words is calculated by:

  s->bitfield_words = (s->num_sources + 31) >> 5;

if the we don't configure "num-sources" property its default value
zero makes s->bitfield_words zero too, which isn't true because
interrupt source 0 still occupies one word.

Let's change the default value to 1 meaning that only interrupt
source 0 is supported by default and a sanity check in realize().

While we are here, add a comment to describe the exact meaning of
this property that the number should include interrupt source 0.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-9-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()

The realize() callback has an errp for us to propagate the error up.
While we are here, correct the wrong multi-line comment format.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211030829.802437-8-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: sifive_plic: Improve robustness of the PLIC config parser

At present the PLIC config parser can only handle legal config string
like "MS,MS". However if a config string like ",MS,MS,,MS,MS,," is
given the parser won't get the correct configuration.

This commit improves the config parser to make it more robust.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-7-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: sifive_plic: Drop PLICMode_H

H-mode has been removed since priv spec 1.10. Drop it.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: spike: Remove misleading comments

PLIC is not included in the 'spike' machine.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-5-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: Sort machines Kconfig options in alphabetical order

SHAKTI_C machine Kconfig option was inserted in disorder. Fix it.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-4-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: Fix opentitan dependency to SIFIVE_PLIC

Since commit ef6310064820 ("hw/riscv: opentitan: Update to the latest build")
the IBEX PLIC model was replaced with the SiFive PLIC model in the
'opentitan' machine but we forgot the add the dependency there.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-3-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers

hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in both riscv_aplic_realize() and
riscv_imsic_realize().

Select MSI_NONBROKEN in RISCV_APLIC and RISCV_IMSIC.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211030829.802437-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC

hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in sifive_plic_realize().

Let SIFIVE_PLIC select MSI_NONBROKEN and drop the selection from
RISC-V machines.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Add Zawrs ISA extension support

This patch adds support for the Zawrs ISA extension.
Given the current (incomplete) implementation of reservation sets
there seems to be no way to provide a full emulation of the WRS
instruction (wake on reservation set invalidation or timeout or
interrupt). Therefore, we just exit the TB and return to the main loop.

The specification can be found here:
  https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc

Note, that the Zawrs extension is frozen, but not ratified yet.

Changes since v3:
* Remove "RFC" since the extension is frozen
* Rebase on master and fix integration issues
* Fix entry ordering in extension list

Changes since v2:
* Rebase on master and resolve conflicts
* Adjustments according to a specification change
* Inline REQUIRE_ZAWRS() since it has only one user

Changes since v1:
* Adding zawrs to the ISA string that is passed to the kernel

Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221005144948.3421504-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+

Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when
leaving M-mode.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Simplify helper_sret() a little bit

There are 2 paths in helper_sret() and the same mstatus update codes
are replicated. Extract the common parts to simplify it a little bit.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Set pc_succ_insn for !rvc illegal insn

Failure to set pc_succ_insn may result in a TB covering zero bytes,
which triggers an assert within the code generator.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1224
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221203175744.151365-1-richard.henderson@linaro.org>
[ Changes by AF:
 - Add missing run-plugin-test-noc-% line
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Fix mret exception cause when no pmp rule is configured

The priv spec v1.12 says:

  If no PMP entry matches an M-mode access, the access succeeds. If
  no PMP entry matches an S-mode or U-mode access, but at least one
  PMP entry is implemented, the access fails. Failed accesses generate
  an instruction, load, or store access-fault exception.

At present the exception cause is set to 'illegal instruction' but
should have been 'instruction access fault'.

Fixes: d102f19a2085 ("target/riscv/pmp: Raise exception if no PMP entry is configured")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221205065303.204095-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: sifive_plic: fix out-of-bound access of source_priority array

If the number of interrupt is not multiple of 32, PLIC will have
out-of-bound access to source_priority array. Compute the number of
interrupt in the last word to avoid this out-of-bound access of array.

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221127165753.30533-1-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/{misc, riscv}: pfsoc: add system controller as unimplemented

The system controller on PolarFire SoC is access via a mailbox. The
control registers for this mailbox lie in the "IOSCB" region & the
interrupt is cleared via write to the "SYSREG" region. It also has a
QSPI controller, usually connected to a flash chip, that is used for
storing FPGA bitstreams and used for In-Application Programming (IAP).

Linux has an implementation of the system controller, through which the
hwrng is accessed, leading to load/store access faults.

Add the QSPI as unimplemented and a very basic (effectively
unimplemented) version of the system controller's mailbox. Rather than
purely marking the regions as unimplemented, service the mailbox
requests by reporting failures and raising the interrupt so a guest can
better handle the lack of support.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221117225518.4102575-4-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: pfsoc: add missing FICs as unimplemented

The Fabric Interconnect Controllers provide interfaces between the FPGA
fabric and the core complex. There are 5 FICs on PolarFire SoC, numbered
0 through 4. FIC2 is an AXI4 slave interface from the FPGA fabric and
does not show up on the MSS memory map. FIC4 is dedicated to the User
Crypto Processor and does not show up on the MSS memory map either.

FIC 0, 1 & 3 do show up in the MSS memory map and neither FICs 0 or 1
are represented in QEMU, leading to load access violations while booting
Linux for Icicle if PCIe is enabled as the root port is connected via
either FIC 0 or 1.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-3-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/misc: pfsoc: add fabric clocks to ioscb

On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by
"Clock Conditioning Circuitry" in the FPGA. The specific clock depends
on the FPGA bitstream & can be locked to one particular {D,P}LL - in the
Icicle Kit Reference Design v2022.09 or later this is/will be the case.

Linux v6.1+ will have a driver for this peripheral and devicetrees that
previously relied on "fixed-frequency" clock nodes have been switched
over to clock-controller nodes. The IOSCB region is represented in QEMU,
but the specific region of it that the CCCs occupy has not so v6.1-rcN
kernels fail to boot in QEMU.

Add the regions as unimplemented so that the status-quo in terms of boot
is maintained.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-2-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add some comments for sstatus CSR in riscv_cpu_dump_state()

sstatus register dump is currently missing in riscv_cpu_dump_state().
As sstatus is a copy of mstatus, which is described in the priv spec,
it seems redundant to print the same information twice.

Add some comments for this to let people know this is intentional.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221125050354.3166023-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: support cache-related PMU events in virtual mode

let tlb_fill() function also increments PMU counter when it is from
two-stage translation, so QEMU could also monitor these PMU events when
CPU runs in VS/VU mode (like running guest OS).

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221123090635.6574-1-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: virt: Remove the redundant ipi-id property

The imsic DT binding[1] has changed and no longer require an ipi-id.
The latest IMSIC driver dynamically allocates ipi id if slow-ipi
is not defined.

Get rid of the unused dt property which may lead to confusion.

[1] https://lore.kernel.org/lkml/20221111044207.1478350-5-apatel@ventanamicro.com/

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221122080529.1692533-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Typo fix in sstc() predicate

We should use "&&" instead of "&" when checking hcounteren.TM and
henvcfg.STCE bits.

Fixes: 3ec0fe18a31f ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221108125703.1463577-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: sifive_plic: Renumber the S irqs for numa support

Commit 40244040a7a changed the way the S irqs are numbered. This breaks when
using numa configuration, e.g.:
./qemu-system-riscv64 -nographic -machine virt,dumpdtb=numa-tree.dtb \
                      -m 2G -smp cpus=16 \
      -object memory-backend-ram,id=mem0,size=512M \
      -object memory-backend-ram,id=mem1,size=512M \
      -object memory-backend-ram,id=mem2,size=512M \
      -object memory-backend-ram,id=mem3,size=512M \
      -numa node,cpus=0-3,memdev=mem0,nodeid=0 \
      -numa node,cpus=4-7,memdev=mem1,nodeid=1 \
      -numa node,cpus=8-11,memdev=mem2,nodeid=2 \
      -numa node,cpus=12-15,memdev=mem3,nodeid=3
leads to:
Unexpected error in object_property_find_err() at ../qom/object.c:1304:
qemu-system-riscv64: Property 'riscv.sifive.plic.unnamed-gpio-out[8]' not
found

This patch makes the nubering of the S irqs identical to what it was before.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Message-Id: <20221114135122.1668703-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add itrigger_enabled field to CPURISCVState

Avoid calling riscv_itrigger_enabled() when calculate the tbflags.
As the itrigger enable status can only be changed when write
tdata1, migration load or itrigger fire, update env->itrigger_enabled
at these places.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-5-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Enable native debug itrigger

When QEMU is not in icount mode, execute instruction one by one. The
tdata1 can be read directly.

When QEMU is in icount mode, use a timer to simulate the itrigger. The
tdata1 may be not right because of lazy update of count in tdata1. Thus,
We should pack the adjusted count into tdata1 before read it back.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add itrigger support when icount is enabled

The max count in itrigger can be 0x3FFF, which will cause a no trivial
translation and execution overload.

When icount is enabled, QEMU provides API that can fetch guest
instruction number. Thus, we can set an timer for itrigger with
the count as deadline.

Only when timer expires or priviledge mode changes, do lazy update
to count.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add itrigger support when icount is not enabled

When icount is not enabled, there is no API in QEMU that can get the
guest instruction number.

Translate the guest code in a way that each TB only has one instruction.
After executing the instruction, decrease the count by 1 until it reaches 0
where the itrigger fires.

Note that only when priviledge matches the itrigger configuration,
the count will decrease.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: generate virtual instruction exception

This patch adds a mechanism to generate a virtual instruction
instruction exception instead of an illegal instruction exception
during instruction decode when virt is enabled.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-4-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: smstateen check for h/s/envcfg

Accesses to henvcfg, henvcfgh and senvcfg are allowed only if the corresponding
bit in mstateen0/hstateen0 is enabled. Otherwise an illegal instruction trap is
generated.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-3-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add smstateen support

Smstateen extension specifies a mechanism to close
the potential covert channels that could cause security issues.

This patch adds the CSRs defined in the specification and
the corresponding predicates and read/write functions.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-2-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv/opentitan: add aon_timer base unimpl

Adds the updated `aon_timer` base as an unimplemented device. This is
used by TockOS, patch ensures the guest doesn't hit load faults.

Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221025043335.339815-3-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv/opentitan: bump opentitan

This patch updates the OpenTitan model to match
the specified register layout as per [1]. Which is also the latest
commit of OpenTitan supported by TockOS.

Note: Pinmux and Padctrl has been merged into Pinmux [2][3], this patch removes
any references to Padctrl. Note: OpenTitan doc [2] has not yet specified
much detail regarding this, except for a note that states `TODO: this
section needs to be updated to reflect the pinmux/padctrl merger`

[1] https://github.com/lowRISC/opentitan/blob/d072ac505f82152678d6e04be95c72b728a347b8/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h
[2] https://docs.opentitan.org/hw/top_earlgrey/doc/design/
[3] https://docs.opentitan.org/hw/ip/pinmux/doc/#overview

Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221025043335.339815-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tcg/riscv: Fix base register for user-only qemu_ld/st

When guest_base != 0, we were not coordinating the usage of
TCG_REG_TMP0 as base properly, leading to a previous zero-extend
of the input address being discarded.

Shuffle the alignment check to the front, because that does not
depend on the zero-extend, and it keeps the register usage clear.
Set base after each step of the address arithmetic instead of before.

Return the base register used from tcg_out_tlb_load, so as to
keep that register choice localized to that function.

Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tcg/riscv: Fix reg overlap case in tcg_out_addsub2

There was a typo using opc_addi instead of opc_add with the
two registers.  While we're at it, simplify the gating test
to al == bl to improve dynamic scheduling even when the
output register does not overlap the inputs.

Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tcg/riscv: Fix range matched by TCG_CT_CONST_M12

We were matching a signed 13-bit range, not a 12-bit range.
Expand the commentary within the function and be explicit
about all of the ranges.

Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Fix PMP propagation for tlb

Only the pmp index that be checked by pmp_hart_has_privs can be used
by pmp_get_tlb_size to avoid an error pmp index.

Before modification, we may use an error pmp index. For example,
we check address 0x4fc, and the size 0x4 in pmp_hart_has_privs. If there
is an pmp rule, valid range is [0x4fc, 0x500), then pmp_hart_has_privs
will return true;

However, this checked pmp index is discarded as pmp_hart_has_privs
return bool value. In pmp_is_range_in_tlb, it will traverse all pmp
rules. The tlb_sa will be 0x0, and tlb_ea will be 0xfff. If there is
a pmp rule [0x10, 0x14), it will be misused as it is legal in
pmp_get_tlb_size.

As we have already known the correct pmp index, just remove the
remove the pmp_is_range_in_tlb and get tlb size directly from
pmp_get_tlb_size.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221012060016.30856-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge tag 'pull-target-arm-20230105' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * Implement AArch32 ARMv8-R support
 * Add Cortex-R52 CPU
 * fix handling of HLT semihosting in system mode
 * hw/timer/ixm_epit: cleanup and fix bug in compare handling
 * target/arm: Coding style fixes
 * target/arm: Clean up includes
 * nseries: minor code cleanups
 * target/arm: align exposed ID registers with Linux
 * hw/arm/smmu-common: remove unnecessary inlines
 * i.MX7D: Handle GPT timers
 * i.MX7D: Connect IRQs to GPIO devices
 * i.MX6UL: Add a specific GPT timer instance
 * hw/net: Fix read of uninitialized memory in imx_fec

# gpg: Signature made Thu 05 Jan 2023 16:43:18 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230105' of https://git.linaro.org/people/pmaydell/qemu-arm: (34 commits)
  hw/net: Fix read of uninitialized memory in imx_fec.
  i.MX7D: Connect IRQs to GPIO devices.
  i.MX6UL: Add a specific GPT timer instance for the i.MX6UL
  i.MX7D: Compute clock frequency for the fixed frequency clocks.
  i.MX7D: Connect GPT timers to IRQ
  hw/arm/smmu-common: Avoid using inlined functions with external linkage
  hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope
  target/arm: align exposed ID registers with Linux
  hw/arm/nseries: Silent -Wmissing-field-initializers warning
  hw/arm/nseries: Constify various read-only arrays
  hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg
  target/arm: cleanup cpu includes
  target/arm: Remove unused includes from helper.c
  target/arm: Remove unused includes from m_helper.c
  target/arm: Fix checkpatch brace errors in helper.c
  target/arm: Fix checkpatch space errors in helper.c
  target/arm: Fix checkpatch comment style warnings in helper.c
  hw/timer/imx_epit: fix compare timer handling
  hw/timer/imx_epit: remove explicit fields cnt and freq
  hw/timer/imx_epit: factor out register write handlers
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/tcg/multiarch: add vma-pthread.c

Add a test that locklessly changes and exercises page protection bits
from various threads. This helps catch race conditions in the VMA
handling.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20221223120252.513319-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Handle false negative lookup in page_check_range

As in page_get_flags, we need to try again with the mmap
lock held if we fail a page lookup.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Use g_free_rcu for user-exec interval trees

Because we allow lockless lookups, we have to be careful
when it is freed.  Use rcu to delay the free until safe.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Fix tb_invalidate_phys_page_unwind

When called from syscall(), we are not within a TB and pc == 0.
We can skip the check for invalidating the current TB.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add TCGHelperInfo argument to tcg_out_call

This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Merge tcg_out_callr into tcg_out_call

There is only one use, and BLR is perhaps even more
self-documentary than CALLR.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Move ffi_cif pointer into TCGHelperInfo

Instead of requiring a separate hash table lookup,
put a pointer to the CIF into TCGHelperInfo.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-4-philmd@linaro.org>

tcg: Factor init_ffi_layouts() out of tcg_context_init()

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-3-philmd@linaro.org>

tcg: Convert typecode_to_ffi from array to function

In the unlikely case of invalid typecode mask, the function
will abort instead of returning a NULL pointer.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-2-philmd@linaro.org>

tcg: Reorg function calls

Pre-compute the function call layout for each helper at startup.
Drop TCG_CALL_DUMMY_ARG, as we no longer need to leave gaps
in the op->args[] array.  This allows several places to stop
checking for NULL TCGTemp, to which TCG_CALL_DUMMY_ARG mapped.

For tcg_gen_callN, loop over the arguments once.  Allocate the TCGOp
for the call early but delay emitting it, collecting arguments first.
This allows the argument processing loop to emit code for extensions
and have them sequenced before the call.

For tcg_reg_alloc_call, loop over the arguments in reverse order,
which allows stack slots to be filled first naturally.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Use output_pref wrapper function

We will shortly have the possibility of more that two outputs,
though only for calls (for which preferences are moot).  Avoid
direct references to op->output_pref[] when possible.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Vary the allocation size for TCGOp

We have been allocating a worst case number of arguments
to support calls.  Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>

tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()

In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().

This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.

In tcg_op_alloc() ensure the number of arguments is in range.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>

accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb

Better to re-use the existing function for copying ops.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg/plugin: Avoid duplicate copy in copy_call

We copied all of the arguments in copy_op_nocheck.
We only need to replace the one argument that we change.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg/plugin: Don't search for the function pointer index

The function pointer is immediately after the output and input
operands; no need to search.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Use TCG_CALL_ARG_EVEN for TCI special case

Change 32-bit tci TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EVEN, to
force 32-bit values to be aligned to 64-bit.  With a small reorg
to the argument processing loop, this neatly replaces an ifdef for
CONFIG_TCG_INTERPRETER.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32

For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64

For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN.  For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind

Prepare to replace a bunch of separate ifdefs with a
consistent way to describe the ABI of a function call.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce tcg_type_size

Add a helper function for computing the size of a type.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Move TCG_TYPE_COUNT outside enum

The count is not itself an enumerator.  Move it outside to
prevent the compiler from considering it with -Wswitch-enum.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Allocate TCGTemp pairs in host memory order

Allocate the first of a pair at the lower address, and the
second of a pair at the higher address.  This will make it
easier to find the beginning of the larger memory block.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Simplify calls to temp_sync vs mem_coherent

The first thing that temp_sync does is check mem_coherent,
so there's no need for the caller to do so.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add temp_subindex to TCGTemp

Record the location of a TCGTemp within a larger object.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Move TCG_{LOW,HIGH} to tcg-internal.h

Move the error-generating fallback from tcg-op.c, and
replace "_link_error" with modern QEMU_ERROR markup.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Avoid TCGV_{LOW,HIGH}

Use the official extend/extract functions instead of routines
that will shortly be internal to tcg.

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Set cflags_next_tb in cpu_common_initfn

While we initialize this value in cpu_common_reset, that
isn't called during startup, so set it as well in init.
This fixes -singlestep versus the very first TB.

Fixes: 04f5b647ed07 ("accel/tcg: Handle -singlestep in curr_cflags")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce paired register allocation

There are several instances where we need to be able to
allocate a pair of registers to related inputs/outputs.
Add 'p' and 'm' register constraints for this, in order to
be able to allocate the even/odd register first or second.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Update scripts/meson-buildoptions.sh

Note: `Makefile` relies on modification dates in the source tree to
detect changes to `meson_options.txt`. However, git does not track
those. Therefore, the following was necessary to regenerate
`meson-buildoptions.sh`:

    touch meson_options.txt
    cd "$BUILD_DIR"
    make update-buildoptions

Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230102104113.3438895-1-ale@rev.ng>

Hexagon (target/hexagon) implement mutability mask for GPRs

Some registers are defined to have immutable bits, this commit
will implement that behavior.

Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230105102349.2181856-1-quic_mliebel@quicinc.com>

target/hexagon: suppress unused variable warning

This patch manually suppresses a warning for an unused variable
(yynerrs) emitted by bison.

This warning has been triggered for the first time by clang 15.

This patch also disables `-Wextra`, which is not usually adopted in
QEMU. However, clang 15 triggers the warning fixed in this patch even in
absence of `-Wextra`.

Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221221155327.1504117-1-ale@rev.ng>

target/hexagon/idef-parser: fix two typos in README

Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Alessandro Di Federico <ale@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <fe67371e03f9dde38eb7554937da0a96a230730e.1672174122.git.quic_mathbern@quicinc.com>

tests/tcg/hexagon: fix underspecifed asm constraints

There are two test cases where the inline asm doesn't
have the correct constraints causing them to fail.

In misc.c, the 'result' output needs the early clobber
modifier since the rest of the inputs are read after
assignment to the output register.

In mem_noshuf.c, the register r7 is written to but
not specified in the clobber list.

Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229081836.12130-1-quic_mthiyaga@quicinc.com>

target/hexagon: rename aliased register HEX_REG_P3_0

The patch renames the identifier of the 32bit register
HEX_REG_P3_0 to HEX_REG_P3_0_ALIASED.

This change is to intended to provide some warning that
HEX_REG_P3_0 is an aliased register which has multiple
representations in CPU state and therefore might require
special handling in some contexts. The hope is to prevent
accidental misuse of this register e.g the issue reported
for the signals tests failure [here][1].

[1]: https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html

Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229092006.10709-3-quic_mthiyaga@quicinc.com>

linux-user/hexagon: fix signal context save & restore

This patch fixes the issue originally reported in
this thread:

https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html

The root cause of the issue is a bug in the hexagon specific
logic for saving & restoring context during signal delivery.
The CPU state has two different representations for the
predicate registers. The current logic saves & restores only
the aliased HEX_REG_P3_O register, which is part of env->gpr[]
field in the CPU state, but not the individual byte-level
predicate registers (pO, p1, p2, p3) backed by env->pred[].

Since all predicated instructions refer only to the
indiviual registers, switching to and back from a signal handler
can clobber these registers if the signal handler writes to them
causing the normal application code to behave unpredictably when
context is restored.

In the reported issue with the 'signals' test, since the updated
hexagon toolchain had built musl with -O2, the functions called
from non_trivial_free were inlined. This meant that the code
emitted reused predicate P0 computed in the entry translation
block of the function non_trivial_free in one of the child TB
as part of an assertion. Since P0 is clobbered by the signal
handler in the signals test, the assertion in non_trivial_free
fails incorectly. Since musl for hexagon implements the 'abort'
function by deliberately writing to memory via null pointer,
this causes the test to fail with segmentation fault.

This patch modifies the signal context save & restore logic
to include the individual p0, p1, p2, p3 and excludes the
32b p3_0 register since its value is derived from the former
registers. It also adds a new test case that reliabily
reproduces the issue for all four predicate registers.

Buglink: https://github.com/quic/toolchain_for_hexagon/issues/6
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229092006.10709-2-quic_mthiyaga@quicinc.com>

Merge tag 'python-pull-request' of https://gitlab.com/jsnow/qemu into staging

Python patch roundup

Mostly CI fixes and some small debugging improvements.

# gpg: Signature made Wed 04 Jan 2023 21:04:26 GMT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* tag 'python-pull-request' of https://gitlab.com/jsnow/qemu:
  python: add 3.11 to supported list
  iotests/check: Fix typing for sys.exit() value
  Python: fix flake8 config
  python/machine: Handle termination cases without QMP
  python/machine: Add debug logging to key state changes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/net: Fix read of uninitialized memory in imx_fec.

Size is used at lines 1088/1188 for the loop, which reads the last 4
bytes from the crc_ptr so it does need to get increased, however it
shouldn't be increased before the buffer is passed to CRC computation,
or the crc32 function will access uninitialized memory.

This was pointed out to me by clg@kaod.org during the code review of
a similar patch to hw/net/ftgmac100.c

Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b
Signed-off-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20221221183202.3788132-1-slongfield@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX7D: Connect IRQs to GPIO devices.

IRQs were not associated to the various GPIO devices inside i.MX7D.
This patch brings the i.MX7D on par with i.MX6.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20221226101418.415170-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX6UL: Add a specific GPT timer instance for the i.MX6UL

The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX7D: Compute clock frequency for the fixed frequency clocks.

CCM derived clocks will have to be added later.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX7D: Connect GPT timers to IRQ

So far the GPT timers were unable to raise IRQs to the processor.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/smmu-common: Avoid using inlined functions with external linkage

When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)")
and building with -Wall we get:

  hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline]
  hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage
    void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova,
    ^
    static

None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.

Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope

This function is not used anywhere outside this file,
so we can make the function "static void".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221216214924.4711-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: align exposed ID registers with Linux

In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed.  This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.

Specifically, the following new ID registers/fields are exposed to
userspace:

ID_AA64PFR1_EL1.BT:       bits 3-0
ID_AA64PFR1_EL1.MTE:      bits 11-8
ID_AA64PFR1_EL1.SME:      bits 27-24

ID_AA64ZFR0_EL1.SVEver:   bits 3-0
ID_AA64ZFR0_EL1.AES:      bits 7-4
ID_AA64ZFR0_EL1.BitPerm:  bits 19-16
ID_AA64ZFR0_EL1.BF16:     bits 23-20
ID_AA64ZFR0_EL1.SHA3:     bits 35-32
ID_AA64ZFR0_EL1.SM4:      bits 43-40
ID_AA64ZFR0_EL1.I8MM:     bits 47-44
ID_AA64ZFR0_EL1.F32MM:    bits 55-52
ID_AA64ZFR0_EL1.F64MM:    bits 59-56

ID_AA64SMFR0_EL1.F32F32:  bit 32
ID_AA64SMFR0_EL1.B16F32:  bit 34
ID_AA64SMFR0_EL1.F16F32:  bit 35
ID_AA64SMFR0_EL1.I8I32:   bits 39-36
ID_AA64SMFR0_EL1.F64F64:  bit 48
ID_AA64SMFR0_EL1.I16I64:  bits 55-52
ID_AA64SMFR0_EL1.FA64:    bit 63

ID_AA64MMFR0_EL1.ECV:     bits 63-60

ID_AA64MMFR1_EL1.AFP:     bits 47-44

ID_AA64MMFR2_EL1.AT:      bits 35-32

ID_AA64ISAR0_EL1.RNDR:    bits 63-60

ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16:    bits 47-44
ID_AA64ISAR1_EL1.DGH:     bits 51-48
ID_AA64ISAR1_EL1.I8MM:    bits 55-52

ID_AA64ISAR2_EL1.WFxT:    bits 3-0
ID_AA64ISAR2_EL1.RPRES:   bits 7-4
ID_AA64ISAR2_EL1.GPA3:    bits 11-8
ID_AA64ISAR2_EL1.APA3:    bits 15-12

The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.

The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.

Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/nseries: Silent -Wmissing-field-initializers warning

Silent when compiling with -Wextra:

  ../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers]
      { NULL }
             ^

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221220142520.24094-4-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/nseries: Constify various read-only arrays

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221220142520.24094-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg

The pointed MouseTransformInfo structure is accessed read-only.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221220142520.24094-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu into staging

Hi,

"Host Memory Backends" and "Memory devices" queue ("mem"):
- virtio-mem fixes
- Use new MPOL_PREFERRED_MANY mbind() policy for memory backends if
  possible

# gpg: Signature made Mon 02 Jan 2023 11:22:04 GMT
# gpg:                using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg:                issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [marginal]
# gpg:                 aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg:                 aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D  FCCA 4DDE 10F7 00FF 835A

* tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu:
  hostmem: Honor multiple preferred nodes if possible
  virtio-mem: Fix typo in function name
  virtio-mem: Fix the iterator variable in a vmem->rdl_list loop
  virtio-mem: Fix the bitmap index of the section offset

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: cleanup cpu includes

Remove some unused headers.

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221213190537.511-7-farosas@suse.de
[added back some includes that are still needed at this point]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Remove unused includes from helper.c

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-6-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Remove unused includes from m_helper.c

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-5-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix checkpatch brace errors in helper.c

Fix this:
ERROR: braces {} are necessary for all arms of this statement

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>