target/xtensa: Finalize config in xtensa_register_core()

Make XtensaConfigList::config not const. Only modify
XtensaConfig within xtensa_register_core(), when the
class is registered, not when it is initialized.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20250210133134.90879-4-philmd@linaro.org>

target/sparc: Constify SPARCCPUClass::cpu_def

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-3-philmd@linaro.org>

target/i386: Constify X86CPUModel uses

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-2-philmd@linaro.org>

disas: Remove target_words_bigendian() call in initialize_debug_target()

All CPUClass implementating disas_set_info() must set the
disassemble_info::endian value.

Ensure that by setting %endian to BFD_ENDIAN_UNKNOWN before
calling the CPUClass::disas_set_info() handler, then asserting
%endian is not BFD_ENDIAN_UNKNOWN after the call.

This allows removing the target_words_bigendian() call in disas/.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250210212931.62401-11-philmd@linaro.org>

target/xtensa: Set disassemble_info::endian value in disas_set_info()

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-10-philmd@linaro.org>

target/sh4: Set disassemble_info::endian value in disas_set_info()

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-9-philmd@linaro.org>

target/riscv: Set disassemble_info::endian value in disas_set_info()

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-8-philmd@linaro.org>

target/ppc: Set disassemble_info::endian value in disas_set_info()

Have the CPUClass::disas_set_info() callback always set\
the disassemble_info::endian field.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-7-philmd@linaro.org>

target/mips: Set disassemble_info::endian value in disas_set_info()

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-6-philmd@linaro.org>

target/microblaze: Set disassemble_info::endian value in disas_set_info

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-5-philmd@linaro.org>

target/arm: Set disassemble_info::endian value in disas_set_info()

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-4-philmd@linaro.org>

target: Set disassemble_info::endian value for big-endian targets

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field for big-endian targets.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-3-philmd@linaro.org>

target: Set disassemble_info::endian value for little-endian targets

Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field for little-endian targets.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-2-philmd@linaro.org>

target/mips: Fix possible MSA int overflow

Fix possible overflow in 1 << (DF_BITS(df) - 2) when DF_BITS(df)
is 64 by using a 64-bit integer for the shift operation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reported-by: Dmitriy Fedin <d.fedin@fobos-nt.ru>
Signed-off-by: Denis Rastyogin <gerben@altlinux.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20250124122707.54264-1-gerben@altlinux.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

target/tricore: Ensure not being build on user emulation

Currently only system emulation is supported.
Assert no target code is built for user emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121142341.17001-4-philmd@linaro.org>

target/rx: Ensure not being build on user emulation

Currently only system emulation is supported.
Assert no target code is built for user emulation.
Remove #ifdef'ry since more work is required before
being able to emulate a user process.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121142341.17001-3-philmd@linaro.org>

target/hexagon: Ensure not being build on system emulation

Currently only user emulation is supported.
Assert no target code is built for system emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com>
Message-Id: <20250121142341.17001-2-philmd@linaro.org>

target/openrisc: Call cpu_openrisc_clock_init() in cpu_realize()

OpenRISC timer is architecturally tied to the CPU.

It doesn't belong to the machine init() code to
instanciate it: move its creation when a vCPU is
realized (after being created).

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250114231304.77150-1-philmd@linaro.org>

target/i386/hvf: Variable type fixup in decoder

decode_bytes reads 1, 2, 4, or 8 bytes at a time. The destination
variable should therefore be a uint64_t, not a target_ulong.

Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Fixes: ff2de1668c9 ("i386: hvf: remove addr_t")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241209203629.74436-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

target/microblaze: Consider endianness while translating code

Consider the CPU ENDI bit, swap instructions when the CPU
endianness doesn't match the binary one.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241105130431.22564-17-philmd@linaro.org>

target/microblaze: Introduce mo_endian() helper

mo_endian() returns the target endianness, currently static.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241105130431.22564-16-philmd@linaro.org>

target/microblaze: Set MO_TE once in do_load() / do_store()

All callers of do_load() / do_store() set MO_TE flag.
Set it once in the callees.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241105130431.22564-15-philmd@linaro.org>

target/microblaze: Explode MO_TExx -> MO_TE | MO_xx

Extract the implicit MO_TE definition in order to replace
it by runtime variable in the next commit.

Mechanical change using:

  $ for n in UW UL UQ UO SW SL SQ; do \
      sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
           $(git grep -l MO_TE$n target/microblaze); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20241105130431.22564-14-philmd@linaro.org>

hw/core/generic-loader: Do not open-code cpu_set_pc()

Directly call cpu_set_pc() instead of open-coding it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250122093028.52416-2-philmd@linaro.org>

cpus: Restrict cpu_get_memory_mapping() to system emulation

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121142341.17001-5-philmd@linaro.org>

cpus: Have cpu_exec_initfn() per user / system emulation

Slighly simplify cpu-target.c again by extracting cpu_exec_initfn()
to cpu-{system,user}.c, adding an empty stub for user emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-19-philmd@linaro.org>

cpus: Have cpu_class_init_props() per user / system emulation

Rather than maintaining a mix of system / user code for CPU
class properties, move system properties to cpu-system.c
and user ones to the new cpu-user.c unit.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-18-philmd@linaro.org>

cpus: Restrict cpu_common_post_load() code to TCG

CPU_INTERRUPT_EXIT was removed in commit 3098dba01c7
("Use a dedicated function to request exit from execution
loop"), tlb_flush() and tb_flush() are related to TCG
accelerator.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-17-philmd@linaro.org>

cpus: Fix style in cpu-target.c

Fix style on code we are going to modify.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-16-philmd@linaro.org>

accel/kvm: Remove unused 'system/cpus.h' header in kvm-cpus.h

Missed in commit b86f59c7155 ("accel: replace struct CpusAccel
with AccelOpsClass") which removed the single CpusAccel use.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-7-philmd@linaro.org>

accel/tcg: Move cpu_memory_rw_debug() user implementation to user-exec.c

cpu_memory_rw_debug() system implementation is defined in
system/physmem.c. Move the user one to accel/tcg/user-exec.c
to simplify cpu-target.c maintenance.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250217130610.18313-6-philmd@linaro.org>

accel/tcg: Avoid using lock_user() in cpu_memory_rw_debug()

We checked the page flags with page_get_flags(), so
locking the page is superfluous. Remove the lock_user()
calls and directly use g2h() in place.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250217130610.18313-5-philmd@linaro.org>

accel/tcg: Take mmap lock in the whole cpu_memory_rw_debug() function

Simplify user implementation of cpu_memory_rw_debug() by
taking the mmap lock globally. See commit 87ab2704296
("linux-user: Allow gdbstub to ignore page protection")
for why this lock is necessary.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250217130610.18313-4-philmd@linaro.org>

accel/tcg: Include missing bswap headers in user-exec.c

Commit 35c653c4029 ("tcg: Add 128-bit guest memory
primitives") introduced the use of bswap128() which is
declared in "qemu/int128.h", commit de95016dfbf ("accel/tcg:
Implement helper_{ld,st}*_mmu for user-only") introduced the
other bswap*() uses, which are declared in "qemu/bswap.h".
Include the missing headers.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250217130610.18313-3-philmd@linaro.org>

accel/accel-cpu-target.h: Include missing 'cpu.h' header

CPU_RESOLVING_TYPE is declared per target in "cpu.h". Include
it (along with "qom/object.h") to avoid when moving code around:

  include/accel/accel-cpu-target.h:26:50: error: expected ')'
     26 | DECLARE_CLASS_CHECKERS(AccelCPUClass, ACCEL_CPU, TYPE_ACCEL_CPU)
        |                                                  ^
  include/accel/accel-cpu-target.h:23:33: note: expanded from macro 'TYPE_ACCEL_CPU'
     23 | #define TYPE_ACCEL_CPU "accel-" CPU_RESOLVING_TYPE
        |                                 ^
  include/accel/accel-cpu-target.h:26:1: note: to match this '('
     26 | DECLARE_CLASS_CHECKERS(AccelCPUClass, ACCEL_CPU, TYPE_ACCEL_CPU)
        | ^
  include/qom/object.h:196:14: note: expanded from macro 'DECLARE_CLASS_CHECKERS'
    196 |     { return OBJECT_GET_CLASS(ClassType, obj, TYPENAME); } \
        |              ^
  include/qom/object.h:558:5: note: expanded from macro 'OBJECT_GET_CLASS'
    558 |     OBJECT_CLASS_CHECK(class, object_get_class(OBJECT(obj)), name)
        |     ^
  include/qom/object.h:544:74: note: expanded from macro 'OBJECT_CLASS_CHECK'
    544 |     ((class_type *)object_class_dynamic_cast_assert(OBJECT_CLASS(class), (name), \
        |                                                                          ^

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-13-philmd@linaro.org>

accel: Forward-declare AccelOpsClass in 'qemu/typedefs.h'

The heavily imported "system/cpus.h" header includes "accel-ops.h"
to get AccelOpsClass type declaration. Reduce headers pressure by
forward declaring it in "qemu/typedefs.h", where we already
declare the AccelCPUState type.

Reduce "system/cpus.h" inclusions by only including
"system/accel-ops.h" when necessary.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-14-philmd@linaro.org>

accel: Rename 'hw/core/accel-cpu.h' -> 'accel/accel-cpu-target.h'

AccelCPUClass is for accelerator to initialize target specific
features of a vCPU. Not really related to hardware emulation,
rename "hw/core/accel-cpu.h" as "accel/accel-cpu-target.h"
(using the explicit -target suffix).

More importantly, target specific header often access the
target specific definitions which are in each target/FOO/cpu.h
header, usually included generically as "cpu.h" relative to
target/FOO/. However, there is already a "cpu.h" in hw/core/
which takes precedence. This change allows "accel-cpu-target.h"
to include a target "cpu.h".

Mechanical change doing:

 $  git mv include/hw/core/accel-cpu.h \
           include/accel/accel-cpu-target.h
 $  sed -i -e 's,hw/core/accel-cpu.h,accel/accel-cpu-target.h,' \
   $(git grep -l hw/core/accel-cpu.h)

and renaming header guard 'ACCEL_CPU_TARGET_H'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-12-philmd@linaro.org>

accel/tcg: Rename 'hw/core/tcg-cpu-ops.h' -> 'accel/tcg/cpu-ops.h'

TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.

Mechanical change doing:

 $  sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
   $(git grep -l hw/core/tcg-cpu-ops.h)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>

accel/tcg: Restrict 'icount_align_option' global to TCG

Since commit 740b1759734 ("cpu-timers, icount: new modules")
we don't need to expose icount_align_option to all the
system code, we can restrict it to TCG. Since it is used as
a boolean, declare it as 'bool' type.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-10-philmd@linaro.org>

accel/tcg: Restrict tlb_init() / destroy() to TCG

Move CPU TLB related methods to accel/tcg/ scope,
in "internal-common.h".

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-9-philmd@linaro.org>

accel/tcg: Build tcg_flags helpers as common code

While cpu-exec.c is build for each target,tcg_flags helpers
aren't target specific. Move them to cpu-exec-common.c to
build them once.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-8-philmd@linaro.org>

accel/tcg: Remove pointless initialization of cflags_next_tb

cflags_next_tb is always re-initialized in the CPU Reset()
handler in cpu_common_reset_hold(), no need to initialize
it in cpu_common_initfn().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-13-philmd@linaro.org>

accel/accel: Make TYPE_ACCEL abstract

There is no generic acceleration, we have to use specific
implementations. Make the base class abstract.

Fixes: b14a0b7469fa ("accel: Use QOM classes for accel types")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200129212345.20547-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

cpus: Keep default fields initialization in cpu_common_initfn()

cpu_common_initfn() is our target agnostic initializer,
while cpu_exec_initfn() is the target specific one.

The %as and %num_ases fields are not target specific,
so initialize them in the common helper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-6-philmd@linaro.org>

cpus: Cache CPUClass early in instance_init() handler

Cache CPUClass as early as possible, when the instance
is initialized.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-5-philmd@linaro.org>

gdbstub: Check for TCG before calling tb_flush()

Use the tcg_enabled() check so the compiler can elide
the call when TCG isn't available, allowing to remove
the tb_flush() stub.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-4-philmd@linaro.org>

gdbstub: Clarify no more than @gdb_num_core_regs can be accessed

Both CPUClass::gdb_read_register() and CPUClass::gdb_write_register()
handlers are called from common gdbstub code, and won't be called with
register index over CPUClass::gdb_num_core_regs:

  int gdb_read_register(CPUState *cpu, GByteArray *buf, int reg)
  {
      CPUClass *cc = CPU_GET_CLASS(cpu);

      if (reg < cc->gdb_num_core_regs) {
          return cc->gdb_read_register(cpu, buf, reg);
      }
      ...
  }

  static int gdb_write_register(CPUState *cpu, uint8_t *mem_buf, int reg)
  {
      CPUClass *cc = CPU_GET_CLASS(cpu);

      if (reg < cc->gdb_num_core_regs) {
          return cc->gdb_write_register(cpu, mem_buf, reg);
      }
      ...
  }

Clarify that in CPUClass docstring, and remove unreachable code on
the microblaze and openrisc implementations.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250122093028.52416-3-philmd@linaro.org>

qemu/compiler: Absorb 'clang-tsa.h'

We already have "qemu/compiler.h" for compiler-specific arrangements,
automatically included by "qemu/osdep.h" for each source file. No
need to explicitly include a header for a Clang particularity.

Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250117170201.91182-1-philmd@linaro.org>

Merge tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging

UI-related for 10.0

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmfH8VIcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5fpaD/41MyK8mvNINCBh/zNs
# BttToR+P2OKDdJcg+fiq8nSaBOqk8TnxWNdfKhd8bdPY3yD56zGzgYhZVLm+d0a6
# a54jkSYLxpM7LL9nKFjLSXDqhmrreU94YGIADzG5WPhndBBHg7ZtHoS5fhlCt4dq
# 0YiPMdQqYf75lSk0w/q+KG+MNX/kA/2Yq2vmxMSRT+DniW7PfcO5MixYfaAs5zJz
# JazcCZTDgbv/DrIsNeaEyMraE3GBnY1fU2obbwoQ2D+eFGA4SpUwjHKZnVkKuD0I
# jYV53BQ+dQMGpN0kmQEyQOj25HvUR5WWlsvSYqHaWupUmg3P+Ne+RaGBUmymgwAU
# FI8SVo9njl/4N8uaSDN76Ed6hpQh+LnnuR0pSDdxLLTef7JwC07009a1tYNeo3gq
# xzTT0NlD8g8oTA/p/2HVAE2nKQME9qK3v3gqfVwZGlPnOBnL2S8+9qO5qK3xHUd0
# g3YwbaKl5aRDs2t2gzrUVEk6VO9TdpllzkskF26YuDmGgPHIU8y0P2TafPgtJ1cI
# emlT06PiNwbJrpOLlLf8SaFXKWgDigt4mTUHg5ZNEDVOfs59qxcTPS1HdSKmA1nP
# x5Zhq4AUFGAxJxziUznFvCYuqwiPqVkiqvrZF2PIAgkBCb0P8JtDbk+6DtTrrP+m
# y2ODr8nH3Oo3hgDk7SOh577NKQ==
# =KDTR
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 14:38:10 HKT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
  chardev: use remoteAddr if the chardev is client
  ui/console-vc: implement DCH (delete) and ICH (insert) commands
  ui/console-vc: add support for cursor DECSC and DECRC commands
  ui/console-vc: report cursor position in the screen not in the scroll buffer
  ui/console-vc: report to the application instead of screen rendering
  ui/console-vc: introduce parsing of the 'ESC ( <ch>' sequence

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-loongarch-20250305' of https://gitlab.com/bibo-mao/qemu into staging

loongarch queue

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ8ezJgAKCRAfewwSUazn
# 0T9pAQCKb+C69kbf9cEVg7PU/z5I0ALFtCNWCKxSkWZPDPik4gEA3IYwdrJ+csuX
# 8nWL0fzyk+8+LDzEwEgCYoNcMnttRQw=
# =P8mi
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 10:12:54 HKT
# gpg:                using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7  13C4 8E86 8FB7 A176 9D4C
#      Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3  D1A4 1F7B 0C12 51AC E7D1

* tag 'pull-loongarch-20250305' of https://gitlab.com/bibo-mao/qemu:
  target/loongarch: Adjust the cpu reset action to a proper position
  hw/loongarch/virt: Enable cpu hotplug feature on virt machine
  hw/loongarch/virt: Update the ACPI table for hotplug cpu
  hw/loongarch/virt: Implement cpu plug interface
  hw/loongarch/virt: Implement cpu unplug interface
  hw/loongarch/virt: Add basic cpu plug interface framework
  hw/loongarch/virt: Add topo properties on CPU object
  hw/loongarch/virt: Add CPU topology support
  hw/intc/loongarch_extioi: Use cpu plug notification
  hw/intc/loongarch_extioi: Implment cpu hotplug interface
  hw/intc/loongarch_extioi: Add basic hotplug framework
  hw/intc/loongarch_extioi: Move gpio irq initial to common code
  hw/intc/loongarch_ipi: Notify ipi object when cpu is plugged
  hw/intc/loongarch_ipi: Implment cpu hotplug interface
  hw/intc/loongarch_ipi: Add basic hotplug framework

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-riscv-to-apply-20250305-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 10.0

* CSR coverity fixes
* Fix unexpected behavior of vector reduction instructions when vl is 0
* Fix incorrect vlen comparison in prop_vlen_set
* Throw debug exception before page fault
* Remove redundant "hart_idx" masking from APLIC
* Add support for Control Transfer Records Ext
* Remove redundant struct members from the IOMMU
* Remove duplicate definitions from the IOMMU
* Fix tick_offset migration for Goldfish RTC
* Add serial alias in virt machine DTB
* Remove Bin Meng from RISC-V maintainers
* Add support for Control Transfer Records Ext
* Log guest errors when reserved bits are set in PTEs
* Add missing Sdtrig disas CSRs
* Correct the hpmevent sscofpmf mask
* Mask upper sscofpmf bits during validation
* Remove warnings about Smdbltrp/Smrnmi being disabled
* Respect mseccfg.RLB bit for TOR mode PMP entry
* Update KVM support to Linux 6.14-rc3
* IOMMU HPM support
* Support Sscofpmf/Svade/Svadu/Smnpm/Ssnpm extensions in KVM
* Add --ignore-family option to binfmt
* Refinement for AIA with KVM acceleration
* Reset time changes for KVM

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmfHrkEACgkQr3yVEwxT
# gBNGTA/+N9nBPZt5cv0E/0EDZMQS8RQrQvz1yHRgAXOq8RnOdcL72v8wovGAfnVu
# l0BXDoVBvw4f2Xm9Q4ptlfH8HAefCeQ4E/K9j5Lwxr8OqZHFg6e+JQIyZOt6wBWI
# hJbz1/laJIbXq3cGgwcE/l0aGfb2UAAsA4dsZVt/MnjAV8GS7BF9RCkgCPxD4FZA
# 0PLiq9dF+4o4q7PxnxAbUVz/uhLzqmcnQemQFHbf9Wms3tZEDKmPSoKP/v+01Rkw
# tm+cgy7OocpgygbMc0nykYG50P+raUBSesk/jFGeKj8cU4IeMuzDsVPWcd4rG+0X
# Z+nENfOY7vOqMCXgaQCW2r4vEQx2Gj0yQG6xmVAemRWzFHJdz5W01/uUSHzJSB+L
# +VbAH55HYKr6sbgecqInQ/rsHKyw6D5QFcj/guz+kvhsH9rJ5q60uywrWL5OEuaK
# vKv7cSZghlf9bwy6soassXxk8z+j4psJ7WnnVpynNKMew9yFFDhayuIFbo9952gH
# 3+NCm2cQrkTYJOXAJwkxBD+I4AXxNSuxNjaVANk9q80uqbT9JiHM7pcvbJI00Fji
# OutJSPYtVXEin9Ev3sJ05YQHsIcZ/Noi3O5IdaRI0AMk/8gyGyhFCVgSpV52dH59
# HguPK05e5cW/xgElGUPHrU+UtzE05p18HnSoVPclF/B5rc8QXN0=
# =dobk
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 09:52:01 HKT
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20250305-1' of https://github.com/alistair23/qemu: (59 commits)
  target/riscv/kvm: add missing KVM CSRs
  target/riscv/kvm: add kvm_riscv_reset_regs_csr()
  target/riscv/cpu: remove unneeded !kvm_enabled() check
  hw/intc/aplic: refine kvm_msicfgaddr
  hw/intc/aplic: refine the APLIC realize
  hw/intc/imsic: refine the IMSIC realize
  binfmt: Add --ignore-family option
  binfmt: Normalize host CPU architecture
  binfmt: Shuffle things around
  target/riscv/kvm: Add some exts support
  docs/specs/riscv-iommu.rst: add HPM support info
  hw/riscv: add IOMMU HPM trace events
  hw/riscv/riscv-iommu.c: add RISCV_IOMMU_CAP_HPM cap
  hw/riscv/riscv-iommu: add hpm events mmio write
  hw/riscv/riscv-iommu: add IOHPMCYCLES mmio write
  hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes
  hw/riscv/riscv-iommu: instantiate hpm_timer
  hw/riscv/riscv-iommu: add riscv_iommu_hpm_incr_ctr()
  hw/riscv/riscv-iommu: add riscv-iommu-hpm file
  hw/riscv/riscv-iommu-bits.h: HPM bits
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'hw-misc-20250305' of https://github.com/philmd/qemu into staging

Misc HW patches

- Remove TCG dependency on ARM_GICV3 (Philippe)
- Add MMIO interface to PVPanic device (Alexander)
- Add vmapple machine (Alexander & Phil)
- Restrict part of sPAPR PAGE_INIT hypercall to TCG (Philippe)
- Make ghes_record_cper_errors() scope static (Gavin)
- Do not expose the ARM virt machines on Xen-only binary (Philippe)
- Xen header cleanups (Philippe)
- Set Freescale eTSEC network device description & category (Zoltan)
- Improve RX FIFO depth for various UARTs (Philippe)
- Prevent TX FIFO memory leak in SiFive UART (Alistair)
- Cleanups in MacIO and AT24C EEPROM (Zoltan)
- Add UFS temperature event notification support & test (Keoseong)
- Remove printf() calls in hw/arm/ (Peter)

 # -----BEGIN PGP SIGNATURE-----
 #
 # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmfHpagACgkQ4+MsLN6t
 # wN4dTg//Z2neoENdnZglRp6q66LLxSTHJnHUMNHe2Bp+KKfhce+//j+CFYgOnJjV
 # P5eExzvHvtYFL6lNXOR7MTM/i/4pixcLYh8anyrnUWkEiufGXI4/30QePbwAAdkZ
 # kQ1CpLI43ZdnMLTh18JswLo/JMkl/jJGvCGNjhtQVnobqam+ATgAbjmcnwA8esJS
 # cCQVFzno9TNvsCnUtMe3IdOfIs9K3atCARbXpA3i3wd52P+NHvGO1jU0QPFBm2Lr
 # 4kcFLI1Sg2vYWD3FujDPeCcfI7kcRDIjHS6vVplK1VlCjjdaQmxx6XKO72PnZZOG
 # 7sra8xJpW8mZS2jfN2AxKMVlNndZMYzAJoS2UBMp1YX8KBEzlcmI2uSjGas6bcmQ
 # XIaP7/mggx7yBU3nspUl8rqY/3Z3wVjwepf1l8KOn9Z13wo+APv4aj6W+zkK96A5
 # NGq6EpoKquINGLBBMkZAdfBOKk97NhwHh1Op04VgJNnPESpLnb5hENtZW1ksg92r
 # tijWdDWnC/JtWMU2dAnmT/9Vaxk4fukGqqncXqQJzGBw0OylzWh5b2Zer02WFyxz
 # oplISEwU3uFcg0OLa9aUHgs7lVWBUbEW3pSk1CtKuqgPtwxm/Gr2KbAVgAbFiyzr
 # 6YPQsfFP5z6CjreOWMELPWmsYV+jtTj/KoIek2QlYt7Ex6uiA6c=
 # =TcY9
 # -----END PGP SIGNATURE-----
 # gpg: Signature made Wed 05 Mar 2025 09:15:20 HKT
 # gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
 # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
 # Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'hw-misc-20250305' of https://github.com/philmd/qemu: (41 commits)
  hw/nvram/eeprom_at24c: Reorganise init to avoid overwriting values
  hw/nvram/eeprom_at24c: Remove memset after g_malloc0
  hw/nvram/eeprom_at24c: Remove ERR macro that calls fprintf to stderr
  hw/nvram/eeprom_at24c: Use OBJECT_DECLARE_SIMPLE_TYPE
  hw/arm/versatilepb: Convert printfs to LOG_GUEST_ERROR
  hw/arm/omap_sx1: Remove ifdeffed out debug printf
  hw/arm/omap1: Convert information printfs to tracepoints
  hw/arm/omap1: Drop ALMDEBUG ifdeffed out code
  hw/arm/omap1: Convert raw printfs to qemu_log_mask()
  tests/qtest/ufs-test: Add test code for the temperature feature
  hw/ufs: Add temperature event notification support
  hw/misc/macio/gpio: Add constants for register bits
  hw/misc/macio: Improve trace logs
  hw/char/sifive_uart: Free fifo on unrealize
  hw/char/sh_serial: Return correct number of empty RX FIFO elements
  hw/char/mcf_uart: Really use RX FIFO depth
  hw/char/mcf_uart: Use FIFO_DEPTH definition instead of magic values
  hw/char/imx_serial: Really use RX FIFO depth
  hw/char/bcm2835_aux: Really use RX FIFO depth
  hw/char/pl011: Really use RX FIFO depth
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'firmware-20250304-pull-request' of https://gitlab.com/kraxel/qemu into staging

- add uefi variable store support

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmfG9m4ACgkQTLbY7tPo
# cTgk8BAAn60ezSx2iet/JarkMugacOJ6C2UbVQho/Q3WCyrQ7K+F0NByczcfKLA6
# OZX84p93qxiK8KJ9tva41eOIYViyfsKf+wGUInNCbXbyGy7RZV3SjE5Yuk9BE9Ta
# 8f/5dDGyCELQWliy4atLUWl2dL0rQ76twLZewYo9n2A+LijIzjuP+kVJeccK8U7A
# qStio3rGZ0vul2OYhE3+veSXd2m2oU32Tce31MUoj9yCbTE1RZSKMXbwbUU/nul9
# RN3X0q4rvXKwbKMUdC+YI+oIzY/1nzrmy5zwwbJsAszsSKjAc2LZeoDqKdbOIynL
# B01dorpg5pVxQUqHz1t+YTfGyuZaYDM6WsaGoU5/9QLW7ZbI857EULq7ptE3DVAS
# YjHiBYqiiYYrCatV4UT1XjkRjX7W8lTdK2M+8Vh1E5b1pGpfPwuKE4YRGwMMK0Ac
# 5LD9HMxnXIDOT9A6+tGc6GYLfT7YToFA3pHn6WdLlGSowB7sYVZy0/xGe3ABjvzt
# WOl1WDWtHCpYIiROpEl+KkbRilwvbLF/IW7x0Ovfsjyh5ucBFu6ojxgRBcOee4Na
# oeBz5GfpeIoelhWl1aSYIUrFCvN2Q/9EafHRsfTzPoKlD3t/7oLNYtMYloiQpsks
# IPpD5OMMmWGaD2G76Nw24nS4+zUf4Gagg6+IAlYt6zjqnmxFWxY=
# =HnUt
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Mar 2025 20:47:42 HKT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* tag 'firmware-20250304-pull-request' of https://gitlab.com/kraxel/qemu: (24 commits)
  docs: add uefi variable service documentation
  hw/uefi: add MAINTAINERS entry
  hw/uefi-vars-sysbus: allow for pc and q35
  hw/uefi-vars-sysbus: allow for arm virt
  hw/uefi-vars-sysbus: add x64 variant
  hw/uefi-vars-sysbus: qemu platform bus support
  hw/uefi: add uefi-vars-sysbus device
  hw/uefi: add to meson
  hw/uefi: add UEFI_VARS to Kconfig
  hw/uefi: add trace-events
  hw/uefi: add var-service-json.c + qapi for NV vars.
  hw/uefi: add var-service-siglist.c
  hw/uefi: add var-service-pkcs7-stub.c
  hw/uefi: add var-service-pkcs7.c
  hw/uefi: add var-service-core.c
  hw/uefi: add var-service-policy.c
  hw/uefi: add var-service-auth.c
  hw/uefi: add var-service-vars.c
  hw/uefi: add var-service-utils.c
  hw/uefi: add var-service-guid.c
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-qapi-2025-02-26-v2' of https://repo.or.cz/qemu/armbru into staging

QAPI patches patches for 2025-02-26

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmfGpZsSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTGtQQAKmLIHy1c1T1yU6G9MFrAaFvH0n10UnB
# mQGOvcV+8f01KxUUIvVRBD9DyRl+kJGMelZoYuMpt+vNiO5XDMqZarJUYFOYukMW
# 6e/qrD3AMeyI0HGZYtELUENmuKLeAhhdE9d1PO56owR2jiFDxdzW+9TXkEXa1NHS
# c54v1y5HPgIdTXd11aXWI+06S6OVSpBteUOQTiSLowBq5BC28DoFAgViA1jZ1qM+
# 1PxL4IV4QkYXfEW2ORt/auamxFWuLNBYNWnyqhR+OYeQjWWAe2A0cmcoLIHVKFwE
# zcuVCXt9+8nZi3Fyx24yOineAhAi29qWxRnbXLrfa4y8OF3cihY0ZNYxvJF61iel
# Wis9WM78OcuQrHCF3BNPqBm9rrac5mQf5mMk4V75Yc+I4oeJeoDG8cLZF1HMpoBT
# iZAl4aW2aa7JQ778c4RxzuCWQSVzOzm5T72Ez9VDJRAWHxoiumoaIOPW9wDi7jWL
# 2P/XxyVCIMsuNLsxkFQEcHwtyK5BYqSf6gCpCbbzTW1YdfDzXQIvrRx4AEuClQvP
# yoLhpv3HjaomWEZbY26gJq1ImSF4uIaLbdOAvAub9wuZWCW0qd/j8PkU/xy0Q0Jx
# gNoNymbRdN5v3eekcZr7L96ILzwMDp2d+zS3q+YgpYUf30INfC7LyTCg6BZ7b06r
# zT05GmiP5DqS
# =LNhH
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Mar 2025 15:02:51 HKT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-qapi-2025-02-26-v2' of https://repo.or.cz/qemu/armbru:
  qapi: pluggable backend code generators
  docs/qapidoc: remove example section support
  docs/qapidoc: support header-less freeform sections
  qapi: update pylintrc config
  qapi/char.json: minor doc rewording for `hub` device

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

chardev: use remoteAddr if the chardev is client

If the chardev is client, the socket file path in localAddr may be NULL.
This is because the socket path comes from getsockname(), according
to man page, getsockname() returns the current address bound by the
socket sockfd. If the chardev is client, it's socket is unbound sockfd.

Therefore, when computing the client chardev socket file path, using
remoteAddr is more appropriate.

Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250225104526.2924175-1-haoqian.he@smartx.com>

ui/console-vc: implement DCH (delete) and ICH (insert) commands

This patch implements DCH (delete character) and ICH (insert
character) commands.

DCH - Delete Character:
   "As characters are deleted, the remaining characters between the
    cursor and right margin move to the left. Character attributes move
    with the characters. The terminal adds blank spaces with no visual
    character attributes at the right margin. DCH has no effect outside
    the scrolling margins" [1].

ICH - Insert Character:
   "The ICH sequence inserts Pn blank characters with the normal
    character attribute. The cursor remains at the beginning of the
    blank characters. Text between the cursor and right margin moves to
    the right. Characters scrolled past the right margin are lost. ICH
    has no effect outside the scrolling margins" [2].

Without these commands console is barely usable.

[1] https://vt100.net/docs/vt510-rm/DCH.html
[1] https://vt100.net/docs/vt510-rm/ICH.html

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250226075913.353676-6-r.peniaev@gmail.com>

ui/console-vc: add support for cursor DECSC and DECRC commands

There are aliases for save and restore cursor commands:

* save cursor
    `ESC 7`     (DEC Save Cursor [1], older VT100)
    `ESC [ s`   (CSI Save Cursor, standard ANSI)

* load cursor
    `ESC 8`     (DEC Restore Cursor [2], older VT100)
    `ESC [ u`   (CSI Restore Cursor, standard ANSI)

This change introduces older DEC sequencies for compatibility with
some scripts (for example [3]) and tools.

This change also adds saving and restoring of character attributes,
which is according to the VT spec [1][2]

[1] https://vt100.net/docs/vt510-rm/DECSC.html
[2] https://vt100.net/docs/vt510-rm/DECRC.html
[3] https://wiki.archlinux.org/title/Working_with_the_serial_console#Resizing_a_terminal

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250226075913.353676-5-r.peniaev@gmail.com>

ui/console-vc: report cursor position in the screen not in the scroll buffer

The format of the CSI cursor position report is `ESC[row;columnR`,
where `row` is a row of a cursor in the screen, not in the scrollback
buffer. What's the difference? Let's say the terminal screen has 24
lines, no matter how long the scrollback buffer may be, the last line
is the 24th.

For example the following command can be executed in xterm on the last
screen line:

   $ echo -en '\e[6n'; IFS='[;' read -sdR _ row col; echo $row:$col
   24:1

It shows the cursor position on the current screen and not relative
to the backscroll buffer.

Before this change the row number was always increasing for the QEMU
VC and represents the cursor position relative to the backscroll
buffer.

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250226075913.353676-4-r.peniaev@gmail.com>

ui/console-vc: report to the application instead of screen rendering

Terminal Device Status Report (DSR) [1] should be sent to an
application, not rendered to the screen. This patch fixes rendering of
terminal report, which appear only on the graphical screen of the
terminal (console "vc") and can be reproduced by the following
command:

     echo -en '\e[6n'; IFS='[;' read -sdR _ row col; echo $row:$col

Command requests cursor position and waits for terminal response, but
instead, the response is rendered to the graphical screen and never
sent to an application.

Why bother? Busybox shell (ash) in Alpine distribution requests cursor
position on each shell prompt (once <ENTER> is pressed), which makes a
prompt on a graphical screen corrupted with repeating Cursor Position
Report (CPR) [2]:

   [root@alpine ~]# \033[57;1R]

Which is very annoying and incorrect.

[1] https://vt100.net/docs/vt100-ug/chapter3.html#DSR
[2] https://vt100.net/docs/vt100-ug/chapter3.html#CPR

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250226075913.353676-3-r.peniaev@gmail.com>

ui/console-vc: introduce parsing of the 'ESC ( <ch>' sequence

This change introduces parsing of the 'ESC ( <ch>' sequence, which is
supposed to change character set [1]. In the QEMU case, the
introduced parsing logic does not actually change the character set, but
simply parses the sequence and does not let output of a tool to be
corrupted with leftovers: `top` sends 'ESC ( B', so if character
sequence is not parsed correctly, chracter 'B' appears in the output:

  Btop - 11:08:42 up 5 min,  1 user,  load average: 0BB
  Tasks:B 158 Btotal,B  1 Brunning,B 157 Bsleeping,B   0 BsBB
  %Cpu(s):B  0.0 Bus,B  0.0 Bsy,B  0.0 Bni,B 99.8 Bid,B  0.2 BB
  MiB Mem :B   7955.6 Btotal,B   7778.6 Bfree,B     79.6 BB
  MiB Swap:B      0.0 Btotal,B      0.0 Bfree,B      0.0 BB

      PID USER      PR  NI    VIRT    RES    SHR S B
  B    735 root      20   0    9328   3540   3152 R B
  B      1 root      20   0   20084  10904   8404 S B
  B      2 root      20   0       0      0      0 S B

[1] https://vt100.net/docs/vt100-ug/chapter3.html#SCS

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250226075913.353676-2-r.peniaev@gmail.com>

target/loongarch: Adjust the cpu reset action to a proper position

The commit 5a99a10da6cf ("target/loongarch: fix vcpu reset command word issue")
fixes the error in the cpu reset ioctl command word delivery process,
so that the command word can be delivered correctly, and adds the judgment
and processing of the error return value, which exposes another problem that
under loongarch, the cpu reset action is earlier than the creation of vcpu.
An error occurs when the cpu reset command is sent.

Now adjust the order of cpu reset and vcpu create actions to fix this problem

Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/loongarch/virt: Enable cpu hotplug feature on virt machine

On virt machine, enable CPU hotplug feature has_hotpluggable_cpus. For
hot-added CPUs, there is socket-id/core-id/thread-id property set,
arch_id can be caculated from these properties. So that cpu slot can be
searched from its arch_id.

Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/loongarch/virt: Update the ACPI table for hotplug cpu

On LoongArch virt machine, ACPI GED hardware is used for CPU hotplug
handler, here CPU hotplug support feature is added based on GED handler,
also CPU scan and reject method is added about CPU device in DSDT table.

Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/loongarch/virt: Implement cpu plug interface

Implement cpu plug interface, and cold-plug cpu uses plug interface
when cpu object is created.

Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/loongarch/virt: Implement cpu unplug interface

Implement cpu unplug interfaces including virt_cpu_unplug_request()
and virt_cpu_unplug().

Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/loongarch/virt: Add basic cpu plug interface framework

Add basic cpu hotplug interface framework, cpu hotplug interface is
stub function and only framework is added here.

Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/loongarch/virt: Add topo properties on CPU object

Add some properties such as socket_id, core_id, thread_id and node_id
on LoongArch CPU object.

Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/loongarch/virt: Add CPU topology support

Add topological relationships for Loongarch VCPU and initialize
topology member variables.

On LoongArch system there is socket/core/thread topo information,
physical CPU id is calculated from CPU topo, every topo sub-field is
aligned by power of 2. So it is different from logical cpu index.

Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/intc/loongarch_extioi: Use cpu plug notification

Use hotplug_handler_plug() to nofity extioi object when cold-plug
cpu is created, so that extioi can set and configure irq routing
to new cpu.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/intc/loongarch_extioi: Implment cpu hotplug interface

When cpu is added, connect extioi gpio irq to CPU irq pin.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/intc/loongarch_extioi: Add basic hotplug framework

LoongArch extioi interrupt controller routes peripheral interrupt
to multiple CPUs, physical cpu id is used in interrupt routing table.
Here hotplug interface is added for extioi object, so that parent irq
line can be connected, and routing table can be added for new created
cpu.

Here only basic hotplug framework is added, it is stub function.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/intc/loongarch_extioi: Move gpio irq initial to common code

When cpu is added, it will connect gpio irq line to cpu irq.
And cpu hot-add is put in common code, move gpio irq initial
part into common code.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/intc/loongarch_ipi: Notify ipi object when cpu is plugged

Use hotplug_handler_plug() to nofity ipi object when cold-plug
cpu is created, so that ipi can set and configure irq routing
to new cpu.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/intc/loongarch_ipi: Implment cpu hotplug interface

Add logic cpu allocation and cpu mapping with cpu hotplug interface.
When cpu is added, connect ipi gpio irq to CPU IRQ_IPI irq pin.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/intc/loongarch_ipi: Add basic hotplug framework

LoongArch ipi can send interrupt to multiple CPUs, interrupt routing
to CPU comes from destination physical cpu id. Here hotplug interface
is added for IPI object, so that parent irq line can be connected, and
routing table can be added for new created cpu.

Here only basic hotplug framework is added, it is stub function.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>

hw/nvram/eeprom_at24c: Reorganise init to avoid overwriting values

The init_rom[] can write values to the beginning of the memory but
these are overwritten by values from a backing file that covers the
whole memory.

init_rom[] is used only if there's no backing file (provides default
content) but should not overwrite backing file content (especially
leaving the file unchanged and only change it in memory).
Do the init_rom[] handling only if it would not be overwritten.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <fd8e0478febd60d5f48c58bc77c60e043d1c3cdc.1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/nvram/eeprom_at24c: Remove memset after g_malloc0

Calling memset to zero memory is not needed after g_malloc0 which
already clears memory. These used to be in separate functions but
after some patches the memset ended up after g_malloc0 and thus can be
dropped.

Fixes: 4f2c6448c3 (hw/nvram/eeprom_at24c: Make reset behavior more like hardware)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <ff281851e6d824ecd01b8b5cd955328dae1515a0.1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/nvram/eeprom_at24c: Remove ERR macro that calls fprintf to stderr

In the realize method error_setg can be used like other places there
already do. The other usage can be replaced with error_report which is
the preferred way instead of directly printing to stderr.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <637b92984795a385b648a84208f093947cc261e4.1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/nvram/eeprom_at24c: Use OBJECT_DECLARE_SIMPLE_TYPE

No need to open code it so use the simple object type declaration.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <08d9900af04789ede485942c8072eaa58bf52f80.1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/arm/versatilepb: Convert printfs to LOG_GUEST_ERROR

Convert some printf() calls for attempts to access nonexistent
registers into LOG_GUEST_ERROR logging.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250227170117.1726895-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/arm/omap_sx1: Remove ifdeffed out debug printf

Remove an ifdeffed out debug printf from the static_write() function in
omap_sx1.c. In theory we could turn this into a tracepoint, but for
code this old it doesn't seem worthwhile. We can add tracepoints if
and when we have a reason to debug something.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250227170117.1726895-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/arm/omap1: Convert information printfs to tracepoints

The omap1 code uses raw printf() statements to print information
about some events; convert these to tracepoints.

In particular, this will stop the functional test for the sx1
from printing the not-very-helpful note
 "omap_clkm_write: clocking scheme set to synchronous scalable"
to the test's default.log.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250227170117.1726895-4-peter.maydell@linaro.org>
[PMD: Include component name (pwl/pwt/lpg) in trace events]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/arm/omap1: Drop ALMDEBUG ifdeffed out code

In omap1.c, there are some debug printfs in the omap_rtc_write()
function that are guardad by ifdef ALMDEBUG. ALMDEBUG is never
set, so this is all dead code.

It's not worth the effort of converting all of these to tracepoints;
a modern tracepoint approach would probably have a single tracepoint
covering all the register writes anyway. Just delete the printf()s.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250227170117.1726895-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/arm/omap1: Convert raw printfs to qemu_log_mask()

omap1.c is very old code, and it contains numerous calls direct to
printf() for various error and information cases.

In this commit, convert the printf() calls that are for either guest
error or unimplemented functionality to qemu_log_mask() calls.

This leaves the printf() calls that are informative or which are
ifdeffed-out debug statements untouched.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250227170117.1726895-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/qtest/ufs-test: Add test code for the temperature feature

This commit adds tests to verify the correctness of query attribute
results related to the temperature feature. It ensures that querying
temperature attributes returns expected values.

Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-ID: <20250225064243epcms2p8b7b59e7bf381bd68d30a6f59b40dea9f@epcms2p8>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/ufs: Add temperature event notification support

This patch introduces temperature event notification support to the UFS
emulation. It enables the emulated UFS device to generate
temperature-related events, including high and low temperature
notifications, in compliance with the UFS specification.

With this feature, UFS drivers can now handle temperature exception events
during testing and development within the emulated environment.
This enhances validation and debugging capabilities for thermal event
handling in UFS implementations.

Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-ID: <20250225064146epcms2p50889cb0066e2d4734f2386de325bcdf6@epcms2p5>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/misc/macio/gpio: Add constants for register bits

Add named constants for register bit values that should make it easier
to understand what these mean.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20250224141026.3B36C4E6010@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/misc/macio: Improve trace logs

Add macio_gpio_read trace event and use that in macio_gpio_read()
instead of macio_gpio_write. Also change log message to match
macio_timer_{read,write}.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250222122850.9D8B84E603D@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/char/sifive_uart: Free fifo on unrealize

We previously allocate the fifo on reset and never free it, which means
we are leaking memory.

Instead let's allocate on realize and free on unrealize.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-ID: <20250303023120.157221-1-alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/char/sh_serial: Return correct number of empty RX FIFO elements

In the IOCanReadHandler sh_serial_can_receive(), if the Serial
Control Register 'Receive Enable' bit is set (bit 4), then we
return a size of (1 << 4) which happens to be equal to 16, so
effectively SH_RX_FIFO_LENGTH.

The IOReadHandler, sh_serial_receive1() takes care to receive
multiple chars, but if the FIFO is partly filled, we only process
the number of free slots in the FIFO, discarding the other chars!

Fix by returning how many elements the FIFO can queue in the
IOCanReadHandler, so we don't have to process more than that in
the IOReadHandler, thus not discarding anything.

Remove the now unnecessary check on 's->rx_cnt < SH_RX_FIFO_LENGTH'
in IOReadHandler, reducing the block indentation.

Fixes: 63242a007a1 ("SH4: Serial controller improvement")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-10-philmd@linaro.org>

hw/char/mcf_uart: Really use RX FIFO depth

While we model a 4-elements RX FIFO since the MCF UART model
was introduced in commit 20dcee94833 ("MCF5208 emulation"),
we only read 1 char at a time!

Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-9-philmd@linaro.org>

hw/char/mcf_uart: Use FIFO_DEPTH definition instead of magic values

Defines FIFO_DEPTH and use it, fixing coding style.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-8-philmd@linaro.org>

hw/char/imx_serial: Really use RX FIFO depth

While we model a 32-elements RX FIFO since the IMX serial
model was introduced in commit 988f2442971 ("hw/char/imx_serial:
Implement receive FIFO and ageing timer") we only read 1 char
at a time!

Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250220092903.3726-7-philmd@linaro.org>

hw/char/bcm2835_aux: Really use RX FIFO depth

While we model a 8-elements RX FIFO since the BCM2835 AUX model
was introduced in commit 97398d900ca ("bcm2835_aux: add emulation
of BCM2835 AUX block") we only read 1 char at a time!

Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-6-philmd@linaro.org>

hw/char/pl011: Really use RX FIFO depth

While we model a 16-elements RX FIFO since the PL011 model was
introduced in commit cdbdb648b7c ("ARM Versatile Platform Baseboard
emulation"), we only read 1 char at a time!

Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.

Example of FIFO better used by enabling the pl011 tracing events
and running the tests/functional/test_aarch64_virt.py tests:

  pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
  pl011_receive recv 5 chars
  pl011_fifo_rx_put RX FIFO push char [0x72] 1/16 depth used
  pl011_irq_state irq state 1
  pl011_fifo_rx_put RX FIFO push char [0x6f] 2/16 depth used
  pl011_fifo_rx_put RX FIFO push char [0x6f] 3/16 depth used
  pl011_fifo_rx_put RX FIFO push char [0x74] 4/16 depth used
  pl011_fifo_rx_put RX FIFO push char [0x0d] 5/16 depth used
  pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
  pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
  pl011_write addr 0x038 value 0x00000050 reg IMSC
  pl011_irq_state irq state 1
  pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
  pl011_read addr 0x03c value 0x00000030 reg RIS
  pl011_write addr 0x044 value 0x00000000 reg ICR
  pl011_irq_state irq state 1
  pl011_read addr 0x018 value 0x00000080 reg FR
  pl011_read_fifo RX FIFO read, used 4/16
  pl011_irq_state irq state 1
  pl011_read addr 0x000 value 0x00000072 reg DR
  pl011_can_receive LCR 0x70, RX FIFO used 4/16, can_receive 12 chars
  pl011_read addr 0x018 value 0x00000080 reg FR
  pl011_read_fifo RX FIFO read, used 3/16
  pl011_irq_state irq state 1
  pl011_read addr 0x000 value 0x0000006f reg DR
  pl011_can_receive LCR 0x70, RX FIFO used 3/16, can_receive 13 chars
  pl011_read addr 0x018 value 0x00000080 reg FR
  pl011_read_fifo RX FIFO read, used 2/16
  pl011_irq_state irq state 1
  pl011_read addr 0x000 value 0x0000006f reg DR
  pl011_can_receive LCR 0x70, RX FIFO used 2/16, can_receive 14 chars
  pl011_read addr 0x018 value 0x00000080 reg FR
  pl011_read_fifo RX FIFO read, used 1/16
  pl011_irq_state irq state 1
  pl011_read addr 0x000 value 0x00000074 reg DR
  pl011_can_receive LCR 0x70, RX FIFO used 1/16, can_receive 15 chars
  pl011_read addr 0x018 value 0x00000080 reg FR
  pl011_read_fifo RX FIFO read, used 0/16
  pl011_irq_state irq state 0
  pl011_read addr 0x000 value 0x0000000d reg DR
  pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
  pl011_read addr 0x018 value 0x00000090 reg FR
  pl011_read addr 0x03c value 0x00000020 reg RIS
  pl011_write addr 0x038 value 0x00000050 reg IMSC
  pl011_irq_state irq state 0
  pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
  pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
  pl011_read addr 0x018 value 0x00000090 reg FR
  pl011_write addr 0x000 value 0x00000072 reg DR

Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-5-philmd@linaro.org>

hw/char/pl011: Improve RX flow tracing events

Log FIFO use (availability and depth).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-4-philmd@linaro.org>

hw/char/pl011: Simplify a bit pl011_can_receive()

Introduce 'fifo_depth' and 'fifo_available' local variables
to better express the 'r' variable use.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-3-philmd@linaro.org>

hw/char/pl011: Warn when using disabled receiver

We shouldn't receive characters when the full UART or its
receiver is disabled. However we don't want to break the
possibly incomplete "my first bare metal assembly program"s,
so we choose to simply display a warning when this occurs.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-Id: <20250220092903.3726-2-philmd@linaro.org>

hw/net/fsl_etsec: Set eTSEC device description and category

Add description and set category for eTSEC device so it shows up
better in -device help.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20250218155407.838774E600E@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/xen/xen-legacy-backend: Remove unused 'net/net.h' header

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <20250218162618.46167-8-philmd@linaro.org>