git.maquefel.me Git - linux.git/log

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-11-06 (i40e)

This series contains updates to i40e driver only.

Ivan Vecera resolves a couple issues with devlink; removing a call to
devlink_port_type_clear() and ensuring devlink port is unregistered
after the net device.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix devlink port unregistering
i40e: Do not call devlink_port_type_clear()
====================

Link: https://lore.kernel.org/r/20231107003600.653796-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: kcm: fill in MODULE_DESCRIPTION()

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Link: https://lore.kernel.org/r/20231108020305.537293-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-23-11-08' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Add missing netfilter modules description to fix W=1, from Florian Westphal.

2) Fix catch-all element GC with timeout when use with the pipapo set
   backend, this remained broken since I tried to fix it this summer,
   then another attempt to fix it recently.

3) Add missing IPVS modules descriptions to fix W=1, also from Florian.

4) xt_recent allocated a too small buffer to store an IPv4-mapped IPv6
   address which can be parsed by in6_pton(), from Maciej Zenczykowski.
   Broken for many releases.

5) Skip IPv4-mapped IPv6, IPv4-compat IPv6, site/link local scoped IPv6
   addressses to set up IPv6 NAT redirect, also from Florian. This is
   broken since 2012.

* tag 'nf-23-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
  netfilter: xt_recent: fix (increase) ipv6 literal buffer length
  ipvs: add missing module descriptions
  netfilter: nf_tables: remove catchall element in GC sync path
  netfilter: add missing module descriptions
====================

Link: https://lore.kernel.org/r/20231108155802.84617-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-11-08

We've added 16 non-merge commits during the last 6 day(s) which contain
a total of 30 files changed, 341 insertions(+), 130 deletions(-).

The main changes are:

1) Fix a BPF verifier issue in precision tracking for BPF_ALU | BPF_TO_BE |
   BPF_END where the source register was incorrectly marked as precise,
   from Shung-Hsi Yu.

2) Fix a concurrency issue in bpf_timer where the former could still have
   been alive after an application releases or unpins the map, from Hou Tao.

3) Fix a BPF verifier issue where immediates are incorrectly cast to u32
   before being spilled and therefore losing sign information, from Hao Sun.

4) Fix a misplaced BPF_TRACE_ITER in check_css_task_iter_allowlist which
   incorrectly compared bpf_prog_type with bpf_attach_type, from Chuyi Zhou.

5) Add __bpf_hook_{start,end} as well as __bpf_kfunc_{start,end}_defs macros,
   migrate all BPF-related __diag callsites over to it, and add a new
   __diag_ignore_all for -Wmissing-declarations to the macros to address
   recent build warnings, from Dave Marchevsky.

6) Fix broken BPF selftest build of xdp_hw_metadata test on architectures
   where char is not signed, from Björn Töpel.

7) Fix test_maps selftest to properly use LIBBPF_OPTS() macro to initialize
   the bpf_map_create_opts, from Andrii Nakryiko.

8) Fix bpffs selftest to avoid unmounting /sys/kernel/debug as it may have
   been mounted and used by other applications already, from Manu Bretelle.

9) Fix a build issue without CONFIG_CGROUPS wrt css_task open-coded
   iterators, from Matthieu Baerts.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
  bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
  selftests/bpf: Fix broken build where char is unsigned
  selftests/bpf: precision tracking test for BPF_NEG and BPF_END
  bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
  selftests/bpf: Add test for using css_task iter in sleepable progs
  selftests/bpf: Add tests for css_task iter combining with cgroup iter
  bpf: Relax allowlist for css_task iter
  selftests/bpf: fix test_maps' use of bpf_map_create_opts
  bpf: Check map->usercnt after timer->timer is assigned
  bpf: Add __bpf_hook_{start,end} macros
  bpf: Add __bpf_kfunc_{start,end}_defs macros
  selftests/bpf: fix test_bpffs
  selftests/bpf: Add test for immediate spilled to stack
  bpf: Fix check_stack_write_fixed_off() to correctly spill imm
  bpf: fix compilation error without CGROUPS
====================

Link: https://lore.kernel.org/r/20231108132448.1970-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: act_ct: Always fill offloading tuple iifidx

Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:

- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().

- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().

Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses

The ipv6 redirect target was derived from the ipv4 one, i.e. its
identical to a 'dnat' with the first (primary) address assigned to the
network interface.  The code has been moved around to make it usable
from nf_tables too, but its still the same as it was back when this
was added in 2012.

IPv6, however, has different types of addresses, if the 'wrong' address
comes first the redirection does not work.

In Daniels case, the addresses are:
  inet6 ::ffff:192 ...
  inet6 2a01: ...

... so the function attempts to redirect to the mapped address.

Add more checks before the address is deemed correct:
1. If the packets' daddr is scoped, search for a scoped address too
2. skip tentative addresses
3. skip mapped addresses

Use the first address that appears to match our needs.

Reported-by: Daniel Huhardeaux <tech@tootai.net>
Closes: https://lore.kernel.org/netfilter/71be06b8-6aa0-4cf9-9e0b-e2839b01b22f@tootai.net/
Fixes: 115e23ac78f8 ("netfilter: ip6tables: add REDIRECT target")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: xt_recent: fix (increase) ipv6 literal buffer length

in6_pton() supports 'low-32-bit dot-decimal representation'
(this is useful with DNS64/NAT64 networks for example):

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:1.2.3.4 > /proc/self/net/xt_recent/DEFAULT
  # cat /proc/self/net/xt_recent/DEFAULT
  src=aaaa:bbbb:cccc:dddd:eeee:ffff:0102:0304 ttl: 0 last_seen: 9733848829 oldest_pkt: 1 9733848829

but the provided buffer is too short:

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:255.255.255.255 > /proc/self/net/xt_recent/DEFAULT
  -bash: echo: write error: Invalid argument

Fixes: 079aa88fe717 ("netfilter: xt_recent: IPv6 support")
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ipvs: add missing module descriptions

W=1 builds warn on missing MODULE_DESCRIPTION, add them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: remove catchall element in GC sync path

The expired catchall element is not deactivated and removed from GC sync
path. This path holds mutex so just call nft_setelem_data_deactivate()
and nft_setelem_catchall_remove() before queueing the GC work.

Fixes: 4a9e12ea7e70 ("netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: add missing module descriptions

W=1 builds warn on missing MODULE_DESCRIPTION, add them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

drivers/net/ppp: use standard array-copy-function

In ppp_generic.c, memdup_user() is utilized to copy a userspace array.
This is done without an overflow-check, which is, however, not critical
because the multiplicands are an unsigned short and struct sock_filter,
which is currently of size 8.

Regardless, string.h now provides memdup_array_user(), a wrapper for
copying userspace arrays in a standardized manner, which has the
advantage of making it more obvious to the reader that an array is being
copied.
The wrapper additionally performs an obligatory overflow check, saving
the reader the effort of analyzing the potential for overflow, and
making the code a bit more robust in case of future changes to the
multiplicands len * size.

Replace memdup_user() with memdup_array_user().

Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN

NETLINK_MAX_FMTMSG_LEN is currently hardcoded to 80, and we provide an
error printf-formatted string having 96 characters including the
terminating \0. Assuming each %d (representing a queue) gets replaced by
a number having at most 2 digits (a reasonable assumption), the final
string is also 96 characters wide, which is too much.

Reduce the verbiage a bit by removing some (partially) redundant words,
which makes the new printf-formatted string be 73 characters wide with
the trailing newline.

Fixes: 800db2d125c2 ("net: enetc: ensure we always have a minimum number of TXQs for stack")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202311061336.4dsWMT1h-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231106160311.616118-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()

KMSAN reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was stored to memory at:
virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was created at:
slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================

The following simple reproducer can cause the issue described above:

int main(void)
{
  int sock;
  struct sockaddr_vm addr = {
    .svm_family = AF_VSOCK,
    .svm_cid = VMADDR_CID_ANY,
    .svm_port = 1234,
  };

  sock = socket(AF_VSOCK, SOCK_STREAM, 0);
  connect(sock, (struct sockaddr *)&addr, sizeof(addr));
  return 0;
}

This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation.

Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Reported-and-tested-by: syzbot+0c8ce1da0ac31abbadcd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c8ce1da0ac31abbadcd
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231104150531.257952-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: respect userspace disabling IFF_MULTICAST

So far we ignore the setting of IFF_MULTICAST. Fix this and clear bit
AcceptMulticast if IFF_MULTICAST isn't set.

Note: Based on the implementations I've seen it doesn't seem to be 100% clear
what a driver is supposed to do if IFF_ALLMULTI is set but IFF_MULTICAST
is not. This patch is based on the understanding that IFF_MULTICAST has
precedence.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4a57ba02-d52d-4369-9f14-3565e6c1f7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'Let BPF verifier consider {task,cgroup} is trusted in bpf_iter_reg'

Chuyi Zhou says:

====================
The patchset aims to let the BPF verivier consider
bpf_iter__cgroup->cgroup and bpf_iter__task->task is trusted suggested by
Alexei[1].

Please see individual patches for more details. And comments are always
welcome.

Link[1]:https://lore.kernel.org/bpf/20231022154527.229117-1-zhouchuyi@bytedance.com/T/#mb57725edc8ccdd50a1b165765c7619b4d65ed1b0

v2->v1:
* Patch #1: Add Yonghong's ack and add description of similar case in
log.
* Patch #2: Add Yonghong's ack
====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly

Commit f49843afde (selftests/bpf: Add tests for css_task iter combining
with cgroup iter) added a test which demonstrates how css_task iter can be
combined with cgroup iter. That test used bpf_cgroup_from_id() to convert
bpf_iter__cgroup->cgroup to a trusted ptr which is pointless now, since
with the previous fix, we can get a trusted cgroup directly from
bpf_iter__cgroup.

Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-3-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg

BTF_TYPE_SAFE_TRUSTED(struct bpf_iter__task) in verifier.c wanted to
teach BPF verifier that bpf_iter__task -> task is a trusted ptr. But it
doesn't work well.

The reason is, bpf_iter__task -> task would go through btf_ctx_access()
which enforces the reg_type of 'task' is ctx_arg_info->reg_type, and in
task_iter.c, we actually explicitly declare that the
ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL.

Actually we have a previous case like this[1] where PTR_TRUSTED is added to
the arg flag for map_iter.

This patch sets ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL |
PTR_TRUSTED in task_reg_info.

Similarly, bpf_cgroup_reg_info -> cgroup is also PTR_TRUSTED since we are
under the protection of cgroup_mutex and we would check cgroup_is_dead()
in __cgroup_iter_seq_show().

This patch is to improve the user experience of the newly introduced
bpf_iter_css_task kfunc before hitting the mainline. The Fixes tag is
pointing to the commit introduced the bpf_iter_css_task kfunc.

Link[1]:https://lore.kernel.org/all/20230706133932.45883-3-aspsk@isovalent.com/

Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-2-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

net: phylink: initialize carrier state at creation

Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.

After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.

It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.

Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Cc: stable@vger.kernel.org
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'vsock-fixes'

Filippo Storniolo says:

====================
vsock: fix server prevents clients from reconnecting

This patch series introduce fix and tests for the following vsock bug:
If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.
This bug does not occur when the server socket is closed.

More details on the first patch changelog.
The remaining patches are refactoring and test.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

test/vsock: add dobule bind connect test

This add bind connect test which creates a listening server socket
and tries to connect a client with a bound local port to it twice.

Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

test/vsock: refactor vsock_accept

This is a preliminary patch to introduce SOCK_STREAM bind connect test.
vsock_accept() is split into vsock_listen() and vsock_accept().

Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

test/vsock fix: add missing check on socket creation

Add check on socket() return value in vsock_listen()
and vsock_connect()

Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock/virtio: remove socket from connected/bound list on shutdown

If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.

This bug does not occur when the server socket is closed:
virtio_transport_release() will eventually schedule a call to
virtio_transport_do_close() and the latter will remove the socket
from the bound and connected socket lists and clear the sk_buff.

However, virtio_transport_do_close() will only perform the above
actions if it has been scheduled, and this will not happen
if the server is processing the shutdown message from a remote peer.

To fix this, introduce a call to vsock_remove_sock()
when the server is handling a client disconnect.
This is to remove the socket from the bound and connected socket
lists without clearing the sk_buff.

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Tested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Fix -Wc23-extensions in tcp_options_write()

Clang warns (or errors with CONFIG_WERROR=y) when CONFIG_TCP_AO is set:

  net/ipv4/tcp_output.c:663:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions]
    663 |         }
        |         ^
  1 error generated.

On earlier releases (such as clang-11, the current minimum supported
version for building the kernel) that do not support C23, this was a
hard error unconditionally:

  net/ipv4/tcp_output.c:663:2: error: expected statement
          }
          ^
  1 error generated.

While adding a semicolon after the label would resolve this, it is more
in line with the kernel as a whole to refactor this block into a
standalone function, which means the goto a label construct can just be
replaced with a return statement. Do so to resolve the warning.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1953
Fixes: 1e03d32bea8e ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Fix the TX ring stall

The TX ring maintained by the tg3 driver can end up in the state, when it
has packets queued for sending but the NIC hardware is not informed, so no
progress is made. This leads to a multi-second interruption in network
traffic followed by dev_watchdog() firing and resetting the queue.

The specific sequence of steps is:

1. tg3_start_xmit() is called at least once and queues packet(s) without
   updating tnapi->prodmbox (netdev_xmit_more() returns true)
2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be
   called.
3. tg3_tso_bug() determines that the SKB is too large, ...

        if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) {

   ... stops the queue, and returns NETDEV_TX_BUSY:

        netif_tx_stop_queue(txq);
        ...
        if (tg3_tx_avail(tnapi) <= frag_cnt_est)
                return NETDEV_TX_BUSY;

4. Since all tg3_tso_bug() call sites directly return, the code updating
   tnapi->prodmbox is skipped.

5. The queue is stuck now. tg3_start_xmit() is not called while the queue
   is stopped. The NIC is not processing new packets because
   tnapi->prodmbox wasn't updated. tg3_tx() is not called by
   tg3_poll_work() because the all TX descriptions that could be freed has
   been freed:

        /* run TX completion thread */
        if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
                tg3_tx(tnapi);

6. Eventually, dev_watchdog() fires triggering a reset of the queue.

This fix makes sure that the tnapi->prodmbox update happens regardless of
the reason tg3_start_xmit() returned.

Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: Fix typo 'weed' in comment

Replace 'weed' with 'we' in the comment.

Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

idpf: fix potential use-after-free in idpf_tso()

skb_cow_head() can change skb->head (and thus skb_shinfo(skb))

We must not cache skb_shinfo(skb) before skb_cow_head().

Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Sridhar Samudrala <sridhar.samudrala@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Bailey Forrest <bcf@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231103200451.514047-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tg3: power down device only on SYSTEM_POWER_OFF

Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.

This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).

The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.

Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Fixes: 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

i40e: Fix devlink port unregistering

Ensure that devlink port is unregistered after unregistering
of net device.

Reproducer:
[root@host ~]# rmmod i40e
[ 4742.939386] i40e 0000:02:00.1: i40e_ptp_stop: removed PHC on enp2s0f1np1
[ 4743.059269] ------------[ cut here ]------------
[ 4743.063900] WARNING: CPU: 21 PID: 10766 at net/devlink/port.c:1078 devl_port_unregister+0x69/0x80
...

Fixes: 9e479d64dc58 ("i40e: Add initial devlink support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: Do not call devlink_port_type_clear()

Do not call devlink_port_type_clear() prior devlink port unregister
and let devlink core to take care about it.

Reproducer:
[root@host ~]# rmmod i40e
[ 4539.964699] i40e 0000:02:00.0: devlink port type for port 0 cleared without a software interface reference, device type not supported by the kernel?
[ 4540.319811] i40e 0000:02:00.1: devlink port type for port 1 cleared without a software interface reference, device type not supported by the kernel?

Fixes: 9e479d64dc58 ("i40e: Add initial devlink support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge branch 'smc-fixes'

D. Wythe says

====================
bugfixs for smc

This patches includes bugfix following:

1. hung state
2. sock leak
3. potential panic

We have been testing these patches for some time, but
if you have any questions, please let us know.

--
v1:
Fix spelling errors and incorrect function names in descriptions

v2->v1:
Add fix tags for bugfix patch
====================

Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: put sk reference if close work was canceled

Note that we always hold a reference to sock when attempting
to submit close_work. Therefore, if we have successfully
canceled close_work from pending, we MUST release that reference
to avoid potential leaks.

Fixes: 42bfba9eaa33 ("net/smc: immediate termination for SMCD link groups")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: allow cdc msg send rather than drop it with NULL sndbuf_desc

This patch re-fix the issues mentioned by commit 22a825c541d7
("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()").

Blocking sending message do solve the issues though, but it also
prevents the peer to receive the final message. Besides, in logic,
whether the sndbuf_desc is NULL or not have no impact on the processing
of cdc message sending.

Hence that, this patch allows the cdc message sending but to check the
sndbuf_desc with care in smc_cdc_tx_handler().

Fixes: 22a825c541d7 ("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: fix dangling sock under state SMC_APPFINCLOSEWAIT

Considering scenario:

smc_cdc_rx_handler
__smc_release
sock_set_flag
smc_close_active()
sock_set_flag

__set_bit(DEAD) __set_bit(DONE)

Dues to __set_bit is not atomic, the DEAD or DONE might be lost.
if the DEAD flag lost, the state SMC_CLOSED will be never be reached
in smc_close_passive_work:

if (sock_flag(sk, SOCK_DEAD) &&
smc_close_sent_any_close(conn)) {
sk->sk_state = SMC_CLOSED;
} else {
/* just shutdown, but not yet closed locally */
sk->sk_state = SMC_APPFINCLOSEWAIT;
}

Replace sock_set_flags or __set_bit to set_bit will fix this problem.
Since set_bit is atomic.

Fixes: b38d732477e4 ("smc: socket closing and linkgroup cleanup")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfsd: regenerate user space parsers after ynl-gen changes

Commit 8cea95b0bd79 ("tools: ynl-gen: handle do ops with no input attrs")
added support for some of the previously-skipped ops in nfsd.
Regenerate the user space parsers to fill them in.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Fix SYN option room calculation for TCP-AO.

When building SYN packet in tcp_syn_options(), MSS, TS, WS, and
SACKPERM are used without checking the remaining bytes in the
options area.

To keep that logic as is, we limit the TCP-AO MAC length in
tcp_ao_parse_crypto().  Currently, the limit is calculated as below.

  MAX_TCP_OPTION_SPACE - TCPOLEN_TSTAMP_ALIGNED
                       - TCPOLEN_WSCALE_ALIGNED
                       - TCPOLEN_SACKPERM_ALIGNED

This looks confusing as (1) we pack SACKPERM into the leading
2-bytes of the aligned 12-bytes of TS and (2) TCPOLEN_MSS_ALIGNED
is not used.  Fortunately, the calculated limit is not wrong as
TCPOLEN_SACKPERM_ALIGNED and TCPOLEN_MSS_ALIGNED are the same value.

However, we should use the proper constant in the formula.

  MAX_TCP_OPTION_SPACE - TCPOLEN_MSS_ALIGNED
                       - TCPOLEN_TSTAMP_ALIGNED
                       - TCPOLEN_WSCALE_ALIGNED

Fixes: 4954f17ddefc ("net/tcp: Introduce TCP_AO setsockopt()s")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: Free pending and dropped SQEs

On interface down, the pending SQEs in the NIX get dropped
or drained out during SMQ flush. But skb's pointed by these
SQEs never get free or updated to the stack as respective CQE
never get added.
This patch fixes the issue by freeing all valid skb's in SQ SG list.

Fixes: b1bc8457e9d0 ("octeontx2-pf: Cleanup all receive buffers in SG descriptor")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net, sched: Fix SKB_NOT_DROPPED_YET splat under debug config

Getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0).

Fixed by disambiguating a legit error from a verdict with a bogus drop_reason

[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>

[2]

ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1

Ido reported:

  [...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this
  reproducer [2]. Problem seems to be that classifiers clear 'struct
  tcf_result::drop_reason', thereby triggering the warning in
  __kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...]

  [1]
  WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
  Modules linked in:
  CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
  RIP: 0010:kfree_skb_reason+0x38/0x130
  [...]
  Call Trace:
   <IRQ>
   __netif_receive_skb_core.constprop.0+0x837/0xdb0
   __netif_receive_skb_one_core+0x3c/0x70
   process_backlog+0x95/0x130
   __napi_poll+0x25/0x1b0
   net_rx_action+0x29b/0x310
   __do_softirq+0xc0/0x29b
   do_softirq+0x43/0x60
   </IRQ>

  [2]
  #!/bin/bash

  ip link add name veth0 type veth peer name veth1
  ip link set dev veth0 up
  ip link set dev veth1 up
  tc qdisc add dev veth1 clsact
  tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
  mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1

What happens is that inside most classifiers the tcf_result is copied over
from a filter template e.g. *res = f->res which then implicitly overrides
the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was
set via sch_handle_{ingress,egress}() for kfree_skb_reason().

Commit text above copied verbatim from Daniel. The general idea of the patch
is not very different from what Ido originally posted but instead done at the
cls_api codepath.

Fixes: 54a59aed395c ("net, sched: Make tc-related drop reason more flexible")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredder
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: fill in missing MODULE_DESCRIPTION()

W=1 builds now warn if a module is built without
a MODULE_DESCRIPTION(). Fill it in for sock_diag.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tcp: fix possible out-of-bounds reads in tcp_hash_fail()

syzbot managed to trigger a fault by sending TCP packets
with all flags being set.

v2:
- While fixing this bug, add PSH flag handling and represent
flags the way tcpdump does : [S], [S.], [P.]
- Print 4-tuples more consistently between families.

BUG: KASAN: stack-out-of-bounds in string_nocheck lib/vsprintf.c:645 [inline]
BUG: KASAN: stack-out-of-bounds in string+0x394/0x3d0 lib/vsprintf.c:727
Read of size 1 at addr ffffc9000397f3f5 by task syz-executor299/5039

CPU: 1 PID: 5039 Comm: syz-executor299 Not tainted 6.6.0-rc7-syzkaller-02075-g55c900477f5b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
string_nocheck lib/vsprintf.c:645 [inline]
string+0x394/0x3d0 lib/vsprintf.c:727
vsnprintf+0xc5f/0x1870 lib/vsprintf.c:2818
vprintk_store+0x3a0/0xb80 kernel/printk/printk.c:2191
vprintk_emit+0x14c/0x5f0 kernel/printk/printk.c:2288
vprintk+0x7b/0x90 kernel/printk/printk_safe.c:45
_printk+0xc8/0x100 kernel/printk/printk.c:2332
tcp_inbound_hash.constprop.0+0xdb2/0x10d0 include/net/tcp.h:2760
tcp_v6_rcv+0x2b31/0x34d0 net/ipv6/tcp_ipv6.c:1882
ip6_protocol_deliver_rcu+0x33b/0x13d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0x14f/0x2f0 net/ipv6/ip6_input.c:483
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_input+0xce/0x440 net/ipv6/ip6_input.c:492
dst_input include/net/dst.h:461 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ipv6_rcv+0x563/0x720 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
__netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
netif_receive_skb_internal net/core/dev.c:5727 [inline]
netif_receive_skb+0x133/0x700 net/core/dev.c:5786
tun_rx_batched+0x429/0x780 drivers/net/tun.c:1579
tun_get_user+0x29e7/0x3bc0 drivers/net/tun.c:2002
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:1956 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 2717b5adea9e ("net/tcp: Add tcp_hash_fail() ratelimited logs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Francesco Ruggeri <fruggeri@arista.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: am65-cpsw: rx_pause/tx_pause controls wrong direction

The rx_pause flag says that whether we support receiving Pause frames.
When a Pause frame is received TX is delayed for some time. This is TX
flow control. In the same manner tx_pause is actually RX flow control.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix fastopen code vs usec TS

After blamed commit, TFO client-ack-dropped-then-recovery-ms-timestamps
packetdrill test failed.

David Morley and Neal Cardwell started investigating and Neal pointed
that we had :

tcp_conn_request()
  tcp_try_fastopen()
   -> tcp_fastopen_create_child
     -> child = inet_csk(sk)->icsk_af_ops->syn_recv_sock()
       -> tcp_create_openreq_child()
          -> copy req_usec_ts from req:
          newtp->tcp_usec_ts = treq->req_usec_ts;
          // now the new TFO server socket always does usec TS, no matter
          // what the route options are...
  send_synack()
    -> tcp_make_synack()
        // disable tcp_rsk(req)->req_usec_ts if route option is not present:
        if (tcp_rsk(req)->req_usec_ts < 0)
                tcp_rsk(req)->req_usec_ts = dst_tcp_usec_ts(dst);

tcp_conn_request() has the initial dst, we can initialize
tcp_rsk(req)->req_usec_ts there instead of later in send_synack();

This means tcp_rsk(req)->req_usec_ts can be a boolean.

Many thanks to David an Neal for their help.

Fixes: 614e8316aa4c ("tcp: add support for usec resolution in TCP TS values")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202310302216.f79d78bc-oliver.sang@intel.com
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Morley <morleyd@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: pmtu.sh: fix result checking

In the PMTU test, when all previous tests are skipped and the new test
passes, the exit code is set to 0. However, the current check mistakenly
treats this as an assignment, causing the check to pass every time.

Consequently, regardless of how many tests have failed, if the latest test
passes, the PMTU test will report a pass.

Fixes: 2a9d3716b810 ("selftests: pmtu.sh: improve the test result processing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: xgmac: Enable support for multiple Flexible PPS outputs

From XGMAC Core 3.20 and later, each Flexible PPS has individual PPSEN bit
to select Fixed mode or Flexible mode. The PPSEN must be set, or it stays
in Fixed PPS mode by default.
XGMAC Core prior 3.20, only PPSEN0(bit 4) is writable. PPSEN{1,2,3} are
read-only reserved, and they are already in Flexible mode by default, our
new code always set PPSEN{1,2,3} do not make things worse ;-)

Fixes: 95eaf3cd0a90 ("net: stmmac: dwxgmac: Add Flexible PPS support")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix termination state for idr_for_each_entry_ul()

The comment for idr_for_each_entry_ul() states

  after normal termination @entry is left with the value NULL

This is not correct in the case where UINT_MAX has an entry in the idr.
In that case @entry will be non-NULL after termination.
No current code depends on the documentation being correct, but to
save future code we should fix it.

Also fix idr_for_each_entry_continue_ul().  While this is not documented
as leaving @entry as NULL, the mellanox driver appears to depend on
it doing so.  So make that explicit in the documentation as well as in
the code.

Fixes: e33d2b74d805 ("idr: fix overflow case for idr_for_each_entry_ul()")
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mi <chrism@mellanox.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/bpf: Fix broken build where char is unsigned

There are architectures where char is not signed. If so, the following
error is triggered:

  | xdp_hw_metadata.c:435:42: error: result of comparison of constant -1 \
  |   with expression of type 'char' is always true \
  |   [-Werror,-Wtautological-constant-out-of-range-compare]
  |   435 |         while ((opt = getopt(argc, argv, "mh")) != -1) {
  |       |                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^  ~~
  | 1 error generated.

Correct by changing the char to int.

Fixes: bb6a88885fde ("selftests/bpf: Add options and frags to xdp_hw_metadata")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20231102103537.247336-1-bjorn@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

net: r8169: Disable multicast filter for RTL8168H and RTL8107E

RTL8168H and RTL8107E ethernet adapters erroneously filter unicast
eapol packets unless allmulti is enabled. These devices correspond to
RTL_GIGA_MAC_VER_46 and VER_48. Add an exception for VER_46 and VER_48
in the same way that VER_35 has an exception.

Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: Patrick Thompson <ptf@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231030205031.177855-1-ptf@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'dccp-tcp-relocate-security_inet_conn_request'

Kuniyuki Iwashima says:

====================
dccp/tcp: Relocate security_inet_conn_request().

security_inet_conn_request() reads reqsk's remote address, but it's not
initialised in some places.

Let's make sure the address is set before security_inet_conn_request().
====================

Link: https://lore.kernel.org/r/20231030201042.32885-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dccp/tcp: Call security_inet_conn_request() after setting IPv6 addresses.

Initially, commit 4237c75c0a35 ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv6 remote address was not initialised then.

However, SELinux/Smack started to read it in netlbl_req_setattr()
after commit e1adea927080 ("calipso: Allow request sockets to be
relabelled by the lsm.").

Commit 284904aa7946 ("lsm: Relocate the IPv4 security_inet_conn_request()
hooks") fixed that kind of issue only in TCPv4 because IPv6 labeling was
not supported at that time. Finally, the same issue was introduced again
in IPv6.

Let's apply the same fix on DCCPv6 and TCPv6.

Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dccp: Call security_inet_conn_request() after setting IPv4 addresses.

Initially, commit 4237c75c0a35 ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv4 remote address was not initialised then.

However, SELinux/Smack started to read it in netlbl_req_setattr()
after the cited commits.

This bug was partially fixed by commit 284904aa7946 ("lsm: Relocate
the IPv4 security_inet_conn_request() hooks").

This patch fixes the last bug in DCCPv4.

Fixes: 389fb800ac8b ("netlabel: Label incoming TCP connections correctly in SELinux")
Fixes: 07feee8f812f ("netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/smc: fix documentation of buffer sizes

Since commit 833bac7ec392 ("net/smc: Fix setsockopt and sysctl to
specify same buffer size again") the SMC protocol uses its own
default values for the smc.rmem and smc.wmem sysctl variables
which are no longer derived from the TCP IPv4 buffer sizes.

Fixup the kernel documentation to reflect this change, too.

Fixes: 833bac7ec392 ("net/smc: Fix setsockopt and sysctl to specify same buffer size again")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231030170343.748097-1-gbayer@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: page_pool: add missing free_percpu when page_pool_init fail

When ptr_ring_init() returns failure in page_pool_init(), free_percpu()
is not called to free pool->recycle_stats, which may cause memory
leak.

Fixes: ad6fa1e1ab1b ("page_pool: Add recycle stats")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20231030091256.2915394-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethtool: Fix documentation of ethtool_sprintf()

This function takes a pointer to a pointer, unlike sprintf() which is
passed a plain pointer. Fix up the documentation to make this clear.

Fixes: 7888fe53b706 ("ethtool: Add common function for filling out strings")
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231028192511.100001-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: lan9303: consequently nested-lock physical MDIO

When LAN9303 is MDIO-connected two callchains exist into
mdio->bus->write():

1. switch ports 1&2 ("physical" PHYs):

virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})->
  lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested

2. LAN9303 virtual PHY:

virtual MDIO bus (lan9303_phy_{read|write}) ->
  lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write}

If the latter functions just take
mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP
false-positive splat. It's false-positive because the first
mdio_lock in the second callchain above belongs to virtual MDIO bus, the
second mdio_lock belongs to physical MDIO bus.

Consequent annotation in lan9303_mdio_{read|write} as nested lock
(similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus)
prevents the following splat:

WARNING: possible circular locking dependency detected
5.15.71 #1 Not tainted
------------------------------------------------------
kworker/u4:3/609 is trying to acquire lock:
ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex
but task is already holding lock:
ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&bus->mdio_lock){+.+.}-{3:3}:
       lock_acquire
       __mutex_lock
       mutex_lock_nested
       lan9303_mdio_read
       _regmap_read
       regmap_read
       lan9303_probe
       lan9303_mdio_probe
       mdio_probe
       really_probe
       __driver_probe_device
       driver_probe_device
       __device_attach_driver
       bus_for_each_drv
       __device_attach
       device_initial_probe
       bus_probe_device
       deferred_probe_work_func
       process_one_work
       worker_thread
       kthread
       ret_from_fork
-> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}:
       __lock_acquire
       lock_acquire.part.0
       lock_acquire
       __mutex_lock
       mutex_lock_nested
       regmap_lock_mutex
       regmap_read
       lan9303_phy_read
       dsa_slave_phy_read
       __mdiobus_read
       mdiobus_read
       get_phy_device
       mdiobus_scan
       __mdiobus_register
       dsa_register_switch
       lan9303_probe
       lan9303_mdio_probe
       mdio_probe
       really_probe
       __driver_probe_device
       driver_probe_device
       __device_attach_driver
       bus_for_each_drv
       __device_attach
       device_initial_probe
       bus_probe_device
       deferred_probe_work_func
       process_one_work
       worker_thread
       kthread
       ret_from_fork
other info that might help us debug this:
Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock(&bus->mdio_lock);
                               lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
                               lock(&bus->mdio_lock);
  lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
*** DEADLOCK ***
5 locks held by kworker/u4:3/609:
#0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work
#1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work
#2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach
#3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch
#4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
stack backtrace:
CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace
show_stack
dump_stack_lvl
dump_stack
print_circular_bug
check_noncircular
__lock_acquire
lock_acquire.part.0
lock_acquire
__mutex_lock
mutex_lock_nested
regmap_lock_mutex
regmap_read
lan9303_phy_read
dsa_slave_phy_read
__mdiobus_read
mdiobus_read
get_phy_device
mdiobus_scan
__mdiobus_register
dsa_register_switch
lan9303_probe
lan9303_mdio_probe
...

Cc: stable@vger.kernel.org
Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-pf: Fix holes in error code

Error code strings are not getting printed properly
due to holes. Print error code as well.

Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231027021953.1819959-2-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-pf: Fix error codes

Some of error codes were wrong. Fix the same.

Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231027021953.1819959-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

inet: shrink struct flowi_common

I am looking at syzbot reports triggering kernel stack overflows
involving a cascade of ipvlan devices.

We can save 8 bytes in struct flowi_common.

This patch alone will not fix the issue, but is a start.

Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: wenxu <wenxu@ucloud.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231025141037.3448203-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'bpf-fix-precision-tracking-for-bpf_alu-bpf_to_be-bpf_end'

Shung-Hsi Yu says:

====================
bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END

Changes since v1:
- add test for negation and bswap (Alexei, Eduard)
- add test for BPF_TO_LE as well to cover all types of BPF_END opcode
- remove vals map and trigger backtracking with jump instead, based of
  Eduard's code
- v1 at https://lore.kernel.org/bpf/20231030132145.20867-1-shung-hsi.yu@suse.com

This patchset fixes and adds selftest for the issue reported by Mohamed
Mahmoud and Toke Høiland-Jørgensen where the kernel can run into a
verifier bug during backtracking of BPF_ALU | BPF_TO_BE | BPF_END
instruction[0]. As seen in the verifier log below, r0 was incorrectly
marked as precise even tough its value was not being used.

Patch 1 fixes the issue based on Andrii's analysis, and patch 2 adds a
selftest for such case using inline assembly. Please see individual
patch for detail.

    ...
mark_precise: frame2: regs=r2 stack= before 1891: (77) r2 >>= 56
mark_precise: frame2: regs=r2 stack= before 1890: (dc) r2 = be64 r2
mark_precise: frame2: regs=r0,r2 stack= before 1889: (73) *(u8 *)(r1 +47) = r3
...
mark_precise: frame2: regs=r0 stack= before 212: (85) call pc+1617
BUG regs 1
processed 5112 insns (limit 1000000) max_states_per_insn 4 total_states 92 peak_states 90 mark_read 20

0: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk

Shung-Hsi Yu (2):
  bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
  selftests/bpf: precision tracking test for BPF_NEG and BPF_END

kernel/bpf/verifier.c                         |  7 +-
.../selftests/bpf/prog_tests/verifier.c       |  2 +
.../selftests/bpf/progs/verifier_precision.c  | 93 +++++++++++++++++++
3 files changed, 101 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/bpf/progs/verifier_precision.c

base-commit: c17cda15cc86e65e9725641daddcd7a63cc9ad01
====================

Link: https://lore.kernel.org/r/20231102053913.12004-1-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: precision tracking test for BPF_NEG and BPF_END

As seen from previous commit that fix backtracking for BPF_ALU | BPF_TO_BE
| BPF_END, both BPF_NEG and BPF_END require special handling. Add tests
written with inline assembly to check that the verifier does not incorrecly
use the src_reg field of BPF_NEG and BPF_END (including bswap added in v4).

Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-4-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END

BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.

backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.

While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).

Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Cc: stable@vger.kernel.org
Reported-by: Mohamed Mahmoud <mmahmoud@redhat.com>
Closes: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Tao Lyu <tao.lyu@epfl.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'relax-allowlist-for-open-coded-css_task-iter'

Chuyi Zhou says:

====================
Relax allowlist for open-coded css_task iter

Hi,
The patchset aims to relax the allowlist for open-coded css_task iter
suggested by Alexei[1].

Please see individual patches for more details. And comments are always
welcome.

Patch summary:
* Patch #1: Relax the allowlist and let css_task iter can be used in
   bpf iters and any sleepable progs.
* Patch #2: Add a test in cgroup_iters.c which demonstrates how
   css_task iters can be combined with cgroup iter.
* Patch #3: Add a test to prove css_task iter can be used in normal
* sleepable progs.
link[1]:https://lore.kernel.org/lkml/CAADnVQKafk_junRyE=-FVAik4hjTRDtThymYGEL8hGTuYoOGpA@mail.gmail.com/
---

Changes in v2:
* Fix the incorrect logic in check_css_task_iter_allowlist. Use
   expected_attach_type to check whether we are using bpf_iters.
* Link to v1:https://lore.kernel.org/bpf/20231022154527.229117-1-zhouchuyi@bytedance.com/T/#m946f9cde86b44a13265d9a44c5738a711eb578fd
Changes in v3:
* Add a testcase to prove css_task can be used in fentry.s
* Link to v2:https://lore.kernel.org/bpf/20231024024240.42790-1-zhouchuyi@bytedance.com/T/#m14a97041ff56c2df21bc0149449abd275b73f6a3
Changes in v4:
* Add Yonghong's ack for patch #1 and patch #2.
* Solve Yonghong's comments for patch #2
* Move prog 'iter_css_task_for_each_sleep' from iters_task_failure.c to
   iters_css_task.c. Use RUN_TESTS to prove we can load this prog.
* Link to v3:https://lore.kernel.org/bpf/20231025075914.30979-1-zhouchuyi@bytedance.com/T/#m3200d8ad29af4ffab97588e297361d0a45d7585d

---
====================

Link: https://lore.kernel.org/r/20231031050438.93297-1-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Add test for using css_task iter in sleepable progs

This Patch add a test to prove css_task iter can be used in normal
sleepable progs.

Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231031050438.93297-4-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Add tests for css_task iter combining with cgroup iter

This patch adds a test which demonstrates how css_task iter can be combined
with cgroup iter and it won't cause deadlock, though cgroup iter is not
sleepable.

Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231031050438.93297-3-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Relax allowlist for css_task iter

The newly added open-coded css_task iter would try to hold the global
css_set_lock in bpf_iter_css_task_new, so the bpf side has to be careful in
where it allows to use this iter. The mainly concern is dead locking on
css_set_lock. check_css_task_iter_allowlist() in verifier enforced css_task
can only be used in bpf_lsm hooks and sleepable bpf_iter.

This patch relax the allowlist for css_task iter. Any lsm and any iter
(even non-sleepable) and any sleepable are safe since they would not hold
the css_set_lock before entering BPF progs context.

This patch also fixes the misused BPF_TRACE_ITER in
check_css_task_iter_allowlist which compared bpf_prog_type with
bpf_attach_type.

Fixes: 9c66dc94b62ae ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231031050438.93297-2-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: fix test_maps' use of bpf_map_create_opts

Use LIBBPF_OPTS() macro to properly initialize bpf_map_create_opts in
test_maps' tests.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231029011509.2479232-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Check map->usercnt after timer->timer is assigned

When there are concurrent uref release and bpf timer init operations,
the following sequence diagram is possible. It will break the guarantee
provided by bpf_timer: bpf_timer will still be alive after userspace
application releases or unpins the map. It also will lead to kmemleak
for old kernel version which doesn't release bpf_timer when map is
released.

bpf program X:

bpf_timer_init()
  lock timer->lock
    read timer->timer as NULL
    read map->usercnt != 0

                process Y:

                close(map_fd)
                  // put last uref
                  bpf_map_put_uref()
                    atomic_dec_and_test(map->usercnt)
                      array_map_free_timers()
                        bpf_timer_cancel_and_free()
                          // just return
                          read timer->timer is NULL

    t = bpf_map_kmalloc_node()
    timer->timer = t
  unlock timer->lock

Fix the problem by checking map->usercnt after timer->timer is assigned,
so when there are concurrent uref release and bpf timer init, either
bpf_timer_cancel_and_free() from uref release reads a no-NULL timer
or the newly-added atomic64_read() returns a zero usercnt.

Because atomic_dec_and_test(map->usercnt) and READ_ONCE(timer->timer)
in bpf_timer_cancel_and_free() are not protected by a lock, so add
a memory barrier to guarantee the order between map->usercnt and
timer->timer. Also use WRITE_ONCE(timer->timer, x) to match the lockless
read of timer->timer in bpf_timer_cancel_and_free().

Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Closes: https://lore.kernel.org/bpf/CABcoxUaT2k9hWsS1tNgXyoU3E-=PuOgMn737qK984fbFmfYixQ@mail.gmail.com
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231030063616.1653024-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Add __bpf_hook_{start,end} macros

Not all uses of __diag_ignore_all(...) in BPF-related code in order to
suppress warnings are wrapping kfunc definitions. Some "hook point"
definitions - small functions meant to be used as attach points for
fentry and similar BPF progs - need to suppress -Wmissing-declarations.

We could use __bpf_kfunc_{start,end}_defs added in the previous patch in
such cases, but this might be confusing to someone unfamiliar with BPF
internals. Instead, this patch adds __bpf_hook_{start,end} macros,
currently having the same effect as __bpf_kfunc_{start,end}_defs, then
uses them to suppress warnings for two hook points in the kernel itself
and some bpf_testmod hook points as well.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Add __bpf_kfunc_{start,end}_defs macros

BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.

This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].

In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.

[0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
[1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: fix test_bpffs

Currently this tests tries to umount /sys/kernel/debug (TDIR) but the
system it is running on may have mounts below.

For example, danobi/vmtest [0] VMs have
    mount -t tracefs tracefs /sys/kernel/debug/tracing
as part of their init.

This change instead creates a "random" directory under /tmp and uses this
as TDIR.
If the directory already exists, ignore the error and keep moving on.

Test:

Originally:

    $ vmtest -k $KERNEL_REPO/arch/x86_64/boot/bzImage "./test_progs -vv -a test_bpffs"
    => bzImage
    ===> Booting
    ===> Setting up VM
    ===> Running command
    [    2.138818] bpf_testmod: loading out-of-tree module taints kernel.
    [    2.140913] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    fn:PASS:unshare 0 nsec
    fn:PASS:mount / 0 nsec
    fn:FAIL:umount /sys/kernel/debug unexpected error: -1 (errno 16)
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    test_test_bpffs:PASS:waitpid 0 nsec
    test_test_bpffs:FAIL:bpffs test  failed 255#282     test_bpffs:FAIL
    Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
    Successfully unloaded bpf_testmod.ko.
    Command failed with exit code: 1

After this change:

    $ vmtest -k $(make image_name) 'cd tools/testing/selftests/bpf && ./test_progs -vv -a test_bpffs'
    => bzImage
    ===> Booting
    ===> Setting up VM
    ===> Running command
    [    2.295696] bpf_testmod: loading out-of-tree module taints kernel.
    [    2.296468] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    fn:PASS:unshare 0 nsec
    fn:PASS:mount / 0 nsec
    fn:PASS:mount tmpfs 0 nsec
    fn:PASS:mkdir /tmp/test_bpffs_testdir/fs1 0 nsec
    fn:PASS:mkdir /tmp/test_bpffs_testdir/fs2 0 nsec
    fn:PASS:mount bpffs /tmp/test_bpffs_testdir/fs1 0 nsec
    fn:PASS:mount bpffs /tmp/test_bpffs_testdir/fs2 0 nsec
    fn:PASS:reading /tmp/test_bpffs_testdir/fs1/maps.debug 0 nsec
    fn:PASS:reading /tmp/test_bpffs_testdir/fs2/progs.debug 0 nsec
    fn:PASS:creating /tmp/test_bpffs_testdir/fs1/a 0 nsec
    fn:PASS:creating /tmp/test_bpffs_testdir/fs1/a/1 0 nsec
    fn:PASS:creating /tmp/test_bpffs_testdir/fs1/b 0 nsec
    fn:PASS:create_map(ARRAY) 0 nsec
    fn:PASS:pin map 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/a) 0 nsec
    fn:PASS:renameat2(/fs1/a, /fs1/b, RENAME_EXCHANGE) 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
    fn:PASS:b should have a's inode 0 nsec
    fn:PASS:access(/tmp/test_bpffs_testdir/fs1/b/1) 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/map) 0 nsec
    fn:PASS:renameat2(/fs1/c, /fs1/b, RENAME_EXCHANGE) 0 nsec
    fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
    fn:PASS:b should have c's inode 0 nsec
    fn:PASS:access(/tmp/test_bpffs_testdir/fs1/c/1) 0 nsec
    fn:PASS:renameat2(RENAME_NOREPLACE) 0 nsec
    fn:PASS:access(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
    bpf_testmod.ko is already unloaded.
    Loading bpf_testmod.ko...
    Successfully loaded bpf_testmod.ko.
    test_test_bpffs:PASS:clone 0 nsec
    test_test_bpffs:PASS:waitpid 0 nsec
    test_test_bpffs:PASS:bpffs test  0 nsec
    #282     test_bpffs:OK
    Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
    Successfully unloaded bpf_testmod.ko.

[0] https://github.com/danobi/vmtest

This is a follow-up of https://lore.kernel.org/bpf/20231024201852.1512720-1-chantr4@gmail.com/T/

v1 -> v2:
  - use a TDIR name that is related to test
  - use C-style comments

Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231031223606.2927976-1-chantr4@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'bpf-fix-incorrect-immediate-spill'

Hao Sun says:

====================
bpf: Fix incorrect immediate spill

Immediate is incorrectly cast to u32 before being spilled, losing sign
information. The range information is incorrect after load again. Fix
immediate spill by remove the cast. The second patch add a test case
for this.

Signed-off-by: Hao Sun <sunhao.th@gmail.com>
---
Changes in v3:
- Change the expected log to fix the test case
- Link to v2: https://lore.kernel.org/r/20231101-fix-check-stack-write-v2-0-cb7c17b869b0@gmail.com

Changes in v2:
- Add fix and cc tags.
- Link to v1: https://lore.kernel.org/r/20231026-fix-check-stack-write-v1-0-6b325ef3ce7e@gmail.com

---
====================

Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-0-f05c2b1473d5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Add test for immediate spilled to stack

Add a test to check if the verifier correctly reason about the sign
of an immediate spilled to stack by BPF_ST instruction.

Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-2-f05c2b1473d5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix check_stack_write_fixed_off() to correctly spill imm

In check_stack_write_fixed_off(), imm value is cast to u32 before being
spilled to the stack. Therefore, the sign information is lost, and the
range information is incorrect when load from the stack again.

For the following prog:
0: r2 = r10
1: *(u64*)(r2 -40) = -44
2: r0 = *(u64*)(r2 - 40)
3: if r0 s<= 0xa goto +2
4: r0 = 1
5: exit
6: r0  = 0
7: exit

The verifier gives:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (bf) r2 = r10                      ; R2_w=fp0 R10=fp0
1: (7a) *(u64 *)(r2 -40) = -44        ; R2_w=fp0 fp-40_w=4294967252
2: (79) r0 = *(u64 *)(r2 -40)         ; R0_w=4294967252 R2_w=fp0
fp-40_w=4294967252
3: (c5) if r0 s< 0xa goto pc+2
mark_precise: frame0: last_idx 3 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (79) r0 = *(u64 *)(r2 -40)
3: R0_w=4294967252
4: (b7) r0 = 1                        ; R0_w=1
5: (95) exit
verification time 7971 usec
stack depth 40
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

So remove the incorrect cast, since imm field is declared as s32, and
__mark_reg_known() takes u64, so imm would be correctly sign extended
by compiler.

Fixes: ecdf985d7615 ("bpf: track immediate values written to stack by BPF_ST instruction")
Cc: stable@vger.kernel.org
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-1-f05c2b1473d5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

rxrpc: Fix two connection reaping bugs

Fix two connection reaping bugs:

(1) rxrpc_connection_expiry is in units of seconds, so
     rxrpc_disconnect_call() needs to multiply it by HZ when adding it to
     jiffies.

(2) rxrpc_client_conn_reap_timeout() should set RXRPC_CLIENT_REAP_TIMER if
     local->kill_all_client_conns is clear, not if it is set (in which case
     we don't need the timer).  Without this, old client connections don't
     get cleaned up until the local endpoint is cleaned up.

Fixes: 5040011d073d ("rxrpc: Make the local endpoint hold a ref on a connected call")
Fixes: 0d6bf319bc5a ("rxrpc: Move the client conn cache management to the I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/783911.1698364174@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf: fix compilation error without CGROUPS

Our MPTCP CI complained [1] -- and KBuild too -- that it was no longer
possible to build the kernel without CONFIG_CGROUPS:

  kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_new':
  kernel/bpf/task_iter.c:919:14: error: 'CSS_TASK_ITER_PROCS' undeclared (first use in this function)
    919 |         case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
        |              ^~~~~~~~~~~~~~~~~~~
  kernel/bpf/task_iter.c:919:14: note: each undeclared identifier is reported only once for each function it appears in
  kernel/bpf/task_iter.c:919:36: error: 'CSS_TASK_ITER_THREADED' undeclared (first use in this function)
    919 |         case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
        |                                    ^~~~~~~~~~~~~~~~~~~~~~
  kernel/bpf/task_iter.c:927:60: error: invalid application of 'sizeof' to incomplete type 'struct css_task_iter'
    927 |         kit->css_it = bpf_mem_alloc(&bpf_global_ma, sizeof(struct css_task_iter));
        |                                                            ^~~~~~
  kernel/bpf/task_iter.c:930:9: error: implicit declaration of function 'css_task_iter_start'; did you mean 'task_seq_start'? [-Werror=implicit-function-declaration]
    930 |         css_task_iter_start(css, flags, kit->css_it);
        |         ^~~~~~~~~~~~~~~~~~~
        |         task_seq_start
  kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_next':
  kernel/bpf/task_iter.c:940:16: error: implicit declaration of function 'css_task_iter_next'; did you mean 'class_dev_iter_next'? [-Werror=implicit-function-declaration]
    940 |         return css_task_iter_next(kit->css_it);
        |                ^~~~~~~~~~~~~~~~~~
        |                class_dev_iter_next
  kernel/bpf/task_iter.c:940:16: error: returning 'int' from a function with return type 'struct task_struct *' makes pointer from integer without a cast [-Werror=int-conversion]
    940 |         return css_task_iter_next(kit->css_it);
        |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_destroy':
  kernel/bpf/task_iter.c:949:9: error: implicit declaration of function 'css_task_iter_end' [-Werror=implicit-function-declaration]
    949 |         css_task_iter_end(kit->css_it);
        |         ^~~~~~~~~~~~~~~~~

This patch simply surrounds with a #ifdef the new code requiring CGroups
support. It seems enough for the compiler and this is similar to
bpf_iter_css_{new,next,destroy}() functions where no other #ifdef have
been added in kernel/bpf/helpers.c and in the selftests.

Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/6665206927
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260528.aHWgVFqq-lkp@intel.com/
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
[ added missing ifdefs for BTF_ID cgroup definitions ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231101181601.1493271-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

net/tcp_sigpool: Fix some off by one bugs

The "cpool_populated" variable is the number of elements in the cpool[]
array that have been populated. It is incremented in
tcp_sigpool_alloc_ahash() every time we populate a new element.
Unpopulated elements are NULL but if we have populated every element then
this code will read one element beyond the end of the array.

Fixes: 8c73b26315aa ("net/tcp: Prepare tcp_md5sig_pool for TCP-AO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/ce915d61-04bc-44fb-b450-35fcc9fc8831@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING

syzbot reported the following uninit-value access issue [1]:

=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.

This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.

syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue.

Fixes: 7be57fc69184 ("tipc: add link get/dump to new netlink api")
Fixes: 0655f6a8635b ("tipc: add bearer disable/enable to new netlink api")
Reported-and-tested-by: syzbot+5138ca807af9d2b42574@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5138ca807af9d2b42574 [1]
Reported-and-tested-by: syzbot+9425c47dccbcb4c17d51@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9425c47dccbcb4c17d51 [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231030075540.3784537-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

hsr: Prevent use after free in prp_create_tagged_frame()

The prp_fill_rct() function can fail.  In that situation, it frees the
skb and returns NULL.  Meanwhile on the success path, it returns the
original skb.  So it's straight forward to fix bug by using the returned
value.

Fixes: 451d8123f897 ("net: prp: add packet handling support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/57af1f28-7f57-4a96-bcd3-b7a0f2340845@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

llc: verify mac len before reading mac header

LLC reads the mac header with eth_hdr without verifying that the skb
has an Ethernet header.

Syzbot was able to enter llc_rcv on a tun device. Tun can insert
packets without mac len and with user configurable skb->protocol
(passing a tun_pi header when not configuring IFF_NO_PI).

    BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
    BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
    llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
    llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
    llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218
    __netif_receive_skb_one_core net/core/dev.c:5523 [inline]
    __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637
    netif_receive_skb_internal net/core/dev.c:5723 [inline]
    netif_receive_skb+0x58/0x660 net/core/dev.c:5782
    tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
    tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002

Add a mac_len test before all three eth_hdr(skb) calls under net/llc.

There are further uses in include/net/llc_pdu.h. All these are
protected by a test skb->protocol == ETH_P_802_2. Which does not
protect against this tun scenario.

But the mac_len test added in this patch in llc_fixup_skb will
indirectly protect those too. That is called from llc_rcv before any
other LLC code.

It is tempting to just add a blanket mac_len check in llc_rcv, but
not sure whether that could break valid LLC paths that do not assume
an Ethernet header. 802.2 LLC may be used on top of non-802.3
protocols in principle. The below referenced commit shows that used
to, on top of Token Ring.

At least one of the three eth_hdr uses goes back to before the start
of git history. But the one that syzbot exercises is introduced in
this commit. That commit is old enough (2008), that effectively all
stable kernels should receive this.

Fixes: f83f1768f833 ("[LLC]: skb allocation size for responses")
Reported-by: syzbot+a8c7be6dee0de1b669cc@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231025234251.3796495-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: xscale: Drop unused PHY number

For some cargoculted reason on incomplete cleanup, we have a
PHY number which refers to nothing and gives confusing messages
about PHY 0 on all ports.

Print the name of the actual PHY device instead.

Reported-by: Howard Harte <hharte@magicandroidapps.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231028-ixp4xx-eth-id-v1-1-57be486d7f0f@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl-gen: don't touch the output file if content is the same

I often regenerate all YNL files in the tree to make sure they
are in sync with the codegen and specs. Generator rewrites
the files unconditionally, so since make looks at file modification
time to decide what to rebuild - my next build takes longer.

We already generate the code to a tempfile most of the time,
only overwrite the target when we have to.

Before:

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307       Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:19:56.347071940 -0700
  Modify: 2023-10-27 15:19:45.089000900 -0700
  Change: 2023-10-27 15:19:45.089000900 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700

  $ ./tools/net/ynl/ynl-regen.sh -f
  [...]

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307       Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:19:56.347071940 -0700
  Modify: 2023-10-27 15:22:18.417968446 -0700
  Change: 2023-10-27 15:22:18.417968446 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700

After:

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307       Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:22:41.520114221 -0700
  Modify: 2023-10-27 15:22:18.417968446 -0700
  Change: 2023-10-27 15:22:18.417968446 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700

  $ ./tools/net/ynl/ynl-regen.sh -f
  [...]

  $ stat include/uapi/linux/netdev.h
    File: include/uapi/linux/netdev.h
    Size: 2307       Blocks: 8          IO Block: 4096   regular file
  Access: 2023-10-27 15:22:41.520114221 -0700
  Modify: 2023-10-27 15:22:18.417968446 -0700
  Change: 2023-10-27 15:22:18.417968446 -0700
   Birth: 2023-10-27 15:19:45.088000894 -0700

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231027223408.1865704-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: specs: devlink: add forgotten port function caps enum values

Add two enum values that the blamed commit omitted.

Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231030161750.110420-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'add-missing-module_descriptions'

Andrew Lunn says:

====================
Add missing MODULE_DESCRIPTIONS

Fixup PHY and MDIO drivers which are missing MODULE_DESCRIPTION.
====================

Link: https://lore.kernel.org/r/20231028184458.99448-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mdio: fill in missing MODULE_DESCRIPTION()s

W=1 builds now warn if a module is built without a
MODULE_DESCRIPTION(). Fill them in based on the Kconfig text, or
similar.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20231028184458.99448-3-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: fill in missing MODULE_DESCRIPTION()s

W=1 builds now warn if a module is built without a
MODULE_DESCRIPTION(). Fill them in based on the Kconfig text, or
similar.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231028184458.99448-2-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-sched-fill-in-missing-module_descriptions-for-net-sched'

Victor Nogueira says:

====================
net: sched: Fill in missing MODULE_DESCRIPTIONs for net/sched

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Fill in the missing MODULE_DESCRIPTIONs for net/sched
====================

Link: https://lore.kernel.org/r/20231027155045.46291-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sched: Fill in missing MODULE_DESCRIPTION for qdiscs

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Fill in missing MODULE_DESCRIPTIONs for TC qdiscs.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-4-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sched: Fill in missing MODULE_DESCRIPTION for classifiers

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Fill in missing MODULE_DESCRIPTIONs for TC classifiers.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-3-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sched: Fill in MODULE_DESCRIPTION for act_gate

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Gate is the only TC action that is lacking such description.
Fill MODULE_DESCRIPTION for Gate TC ACTION.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-next-6.7-followup' of git://git./linux/kernel/git/netdev/net-next

Pull more networking updates from Jakub Kicinski:

- Support GRO decapsulation for IPsec ESP in UDP

- Add a handful of MODULE_DESCRIPTION()s

- Drop questionable alignment check in TCP AO to avoid
   build issue after changes in the crypto tree

* tag 'net-next-6.7-followup' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
  net: tcp: remove call to obsolete crypto_ahash_alignmask()
  net: fill in MODULE_DESCRIPTION()s under drivers/net/
  net: fill in MODULE_DESCRIPTION()s under net/802*
  net: fill in MODULE_DESCRIPTION()s under net/core
  net: fill in MODULE_DESCRIPTION()s in kuba@'s modules
  xfrm: policy: fix layer 4 flowi decoding
  xfrm Fix use after free in __xfrm6_udp_encap_rcv.
  xfrm: policy: replace session decode with flow dissector
  xfrm: move mark and oif flowi decode into common code
  xfrm: pass struct net to xfrm_decode_session wrappers
  xfrm: Support GRO for IPv6 ESP in UDP encapsulation
  xfrm: Support GRO for IPv4 ESP in UDP encapsulation
  xfrm: Use the XFRM_GRO to indicate a GRO call on input
  xfrm: Annotate struct xfrm_sec_ctx with __counted_by
  xfrm: Remove unused function declarations

Merge tag 'probes-v6.7' of git://git./linux/kernel/git/trace/linux-trace

Pull probes updates from Masami Hiramatsu:
"Cleanups:

   - kprobes: Fixes typo in kprobes samples

   - tracing/eprobes: Remove 'break' after return

  kretprobe/fprobe performance improvements:

   - lib: Introduce new `objpool`, which is a high performance lockless
     object queue. This uses per-cpu ring array to allocate/release
     objects from the pre-allocated object pool.

     Since the index of ring array is a 32bit sequential counter, we can
     retry to push/pop the object pointer from the ring without lock (as
     seq-lock does)

   - lib: Add an objpool test module to test the functionality and
     evaluate the performance under some circumstances

   - kprobes/fprobe: Improve kretprobe and rethook scalability
     performance with objpool.

     This improves both legacy kretprobe and fprobe exit handler (which
     is based on rethook) to be scalable on SMP systems. Even with
     8-threads parallel test, it shows a great scalability improvement

   - Remove unneeded freelist.h which is replaced by objpool

   - objpool: Add maintainers entry for the objpool

   - objpool: Fix to remove unused include header lines"

* tag 'probes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: unused header files removed
  MAINTAINERS: objpool added
  kprobes: freelist.h removed
  kprobes: kretprobe scalability improvement
  lib: objpool test module added
  lib: objpool added: ring-array based lockless MPMC
  tracing/eprobe: drop unneeded breaks
  samples: kprobes: Fixes a typo

Merge tag 'bootconfig-v6.7' of git://git./linux/kernel/git/trace/linux-trace

Pull bootconfig updates from Masami Hiramatsu:

- Documentation update for /proc/cmdline, which includes both the
   parameters from bootloader and the embedded parameters in the kernel

- fs/proc: Add bootloader argument as a comment line to
   /proc/bootconfig so that the user can distinguish what parameters
   were passed from bootloader even if bootconfig modified that

- Documentation fix to add /proc/bootconfig to proc.rst

* tag 'bootconfig-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  doc: Add /proc/bootconfig to proc.rst
  fs/proc: Add boot loader arguments as comment to /proc/bootconfig
  doc: Update /proc/cmdline documentation to include boot config

Merge tag 'asm-generic-6.7' of git://git./linux/kernel/git/arnd/asm-generic

Pull ia64 removal and asm-generic updates from Arnd Bergmann:

- The ia64 architecture gets its well-earned retirement as planned,
   now that there is one last (mostly) working release that will be
   maintained as an LTS kernel.

- The architecture specific system call tables are updated for the
   added map_shadow_stack() syscall and to remove references to the
   long-gone sys_lookup_dcookie() syscall.

* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  hexagon: Remove unusable symbols from the ptrace.h uapi
  asm-generic: Fix spelling of architecture
  arch: Reserve map_shadow_stack() syscall number for all architectures
  syscalls: Cleanup references to sys_lookup_dcookie()
  Documentation: Drop or replace remaining mentions of IA64
  lib/raid6: Drop IA64 support
  Documentation: Drop IA64 from feature descriptions
  kernel: Drop IA64 support from sig_fault handlers
  arch: Remove Itanium (IA-64) architecture

Merge tag 'soc-arm-6.7' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC code updates from Arnd Bergmann:
"The AMD Pensando DPU platform gets added to arm64, and some minor
  updates make it into Renesas' 32-bit platforms"

* tag 'soc-arm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5}
  arm64: Add config for AMD Pensando SoC platforms
  MAINTAINERS: Add entry for AMD PENSANDO
  ARM: shmobile: sh73a0: Reserve boot area when SMP is enabled
  ARM: shmobile: r8a7779: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Remove unneeded once handling

Merge tag 'soc-defconfig-6.7' of git://git./linux/kernel/git/soc/soc

Pull ARM defconfig updates from Arnd Bergmann:
"These are the usual trivial changes to enable a couple of newly added
  device drivers and remove lines for Kconfig options that are no longer
  needed"

* tag 'soc-defconfig-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: defconfig: enable DisplayPort altmode support
  arm64: defconfig: enable CONFIG_TYPEC_QCOM_PMIC
  arm64: defconfig: add various drivers for Amlogic based boards
  ARM: config: aspeed: Remove FIRMWARE_MEMMAP
  ARM: config: aspeed_g5: Enable SSIF BMC driver
  ARM: config: aspeed: Add Ampere SMPro drivers
  ARM: config: aspeed: Add new FSI drivers
  arm64: defconfig: Enable TPS6593 PMIC for SK-AM62A
  ARM: exynos_defconfig: add driver for ISL29018
  ARM: multi_v7_defconfig: add drivers for S5C73M3 & S5K6A3 camera sensors
  arm64: defconfig: Enable RZ/G3S (R9A08G045) SoC
  ARM: multi_v7_defconfig: add tm2-touchkey driver
  ARM: exynos_defconfig: replace SATA_AHCI_PLATFORM with AHCI_DWC driver
  ARM: multi_v7_defconfig: add AHCI_DWC driver
  ARM: multi_v7_defconfig: make Exynos related PHYs modules
  ARM: s5pv210_defconfig: enable IIO required by MAX17040
  ARM: shmobile: defconfig: Refresh for v6.6-rc3
  ARM: defconfig: cleanup orphaned CONFIGs
  arm64: defconfig: Enable Samsung DSIM driver
  arm64: defconfig: Enable CONFIG_USB_MASS_STORAGE
  ...

Merge tag 'soc-drivers-6.7' of git://git./linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are

   - Qualcomm platforms gain support for the Qualcomm Secure Execution
     Environment firmware interface to access EFI variables on certain
     devices, and new features for multiple platform and firmware
     drivers.

   - Arm FF-A firmware support gains support for v1.1 specification
     features, in particular notification and memory transaction
     descriptor changes.

   - SCMI firmware support now support v3.2 features for clock and DVFS
     configuration and a new transport for Qualcomm platforms.

   - Minor cleanups and bugfixes are added to pretty much all the active
     platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
     amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
     more.

     In particular, this contains portions of the treewide conversion to
     use __counted_by annotations and the device_get_match_data helper"

* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
  soc: qcom: pmic_glink_altmode: Print return value on error
  firmware: qcom: scm: remove unneeded 'extern' specifiers
  firmware: qcom: scm: add a missing forward declaration for struct device
  firmware: qcom: move Qualcomm code into its own directory
  soc: samsung: exynos-chipid: Convert to platform remove callback returning void
  soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
  soc: qcom: pmic_glink: fix connector type to be DisplayPort
  soc: ti: k3-socinfo: Avoid overriding return value
  soc: ti: k3-socinfo: Fix typo in bitfield documentation
  soc: ti: knav_qmss_queue: Use device_get_match_data()
  firmware: ti_sci: Use device_get_match_data()
  firmware: qcom: qseecom: add missing include guards
  soc/pxa: ssp: Convert to platform remove callback returning void
  soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
  soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
  soc/loongson: loongson2_guts: Convert to platform remove callback returning void
  soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
  soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
  ...

Merge tag 'soc-dt-6.7' of git://git./linux/kernel/git/soc/soc

Pull SoC DT updates from Arnd Bergmann:
"There are a couple new SoCs that are supported for the first time:

   - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
     cores

   - Sophgo makes RISC-V based chips, and we now support the CV1800B
     chip used in the milkv-duo board and the massive sg2042 chip in the
     milkv-pioneer, a 64-core developer workstation.

   - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
     7c and gets added with some Xiaomi phones

   - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
     and the RZ/G3S (R9A08G045) embedded SoC.

  There are also a bunch of newly supported machines that use already
  supported chips. On the 32-bit side, we have:

   - USRobotics USR8200 is a NAS/Firewall/router based on the ancient
     Intel IXP4xx platform

   - A couple of machines based on the NXP i.MX5 and i.MX6 platforms

   - One machine each for Allwinner V3s, Aspeed AST2600, Microchip
     sama5d29 and ST STM32mp157

  The other ones all use arm64 cores on chips from allwinner, amlogic,
  freescale, mediatek, qualcomm and rockchip"

* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
  ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
  ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
  ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
  ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
  arm64: dts: socionext: add missing cache properties
  riscv: dts: thead: convert isa detection to new properties
  arm64: dts: Update cache properties for socionext
  arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
  arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
  arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
  arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
  arm64: dts: ti: k3-am62p: Add nodes for more IPs
  arm64: dts: rockchip: Add Turing RK1 SoM support
  dt-bindings: arm: rockchip: Add Turing RK1
  dt-bindings: vendor-prefixes: add turing
  arm64: dts: rockchip: Add DFI to rk3588s
  arm64: dts: rockchip: Add DFI to rk356x
  arm64: dts: rockchip: Always enable DFI on rk3399
  ...

Merge tag 'vfio-v6.7-rc1' of https://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- Add support for "chunk mode" in the mlx5-vfio-pci variant driver,
   which allows both larger device image sizes for migration, beyond the
   previous 4GB limit, and also read-ahead support for improved
   migration performance (Yishai Hadas)

- A new bus master control interface for the CDX bus driver where there
   is no in-band mechanism to toggle device DMA as there is through
   config space on PCI devices (Nipun Gupta)

- Add explicit alignment directives to vfio data structures to reduce
   the chance of breaking 32-bit userspace. In most cases this is
   transparent and the remaining cases where data structures are padded
   work within the existing rules for extending data structures within
   vfio (Stefan Hajnoczi)

- Resolve a bug in the cdx bus driver noted when compiled with clang
   where missing parenthesis result in the wrong operation (Nathan
   Chancellor)

- Resolve errors reported by smatch for a function when dealing with
   invalid inputs (Alex Williamson)

- Add migration support to the mtty vfio/mdev sample driver for testing
   and integration purposes, allowing CI of migration without specific
   hardware requirements. Also resolve many of the short- comings of
   this driver relative to implementation of the vfio interrupt ioctl
   along the way (Alex Williamson)

* tag 'vfio-v6.7-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/mtty: Enable migration support
  vfio/mtty: Overhaul mtty interrupt handling
  vfio: Fix smatch errors in vfio_combine_iova_ranges()
  vfio/cdx: Add parentheses between bitwise AND expression and logical NOT
  vfio/mlx5: Activate the chunk mode functionality
  vfio/mlx5: Add support for READING in chunk mode
  vfio/mlx5: Add support for SAVING in chunk mode
  vfio/mlx5: Pre-allocate chunks for the STOP_COPY phase
  vfio/mlx5: Rename some stuff to match chunk mode
  vfio/mlx5: Enable querying state size which is > 4GB
  vfio/mlx5: Refactor the SAVE callback to activate a work only upon an error
  vfio/mlx5: Wake up the reader post of disabling the SAVING migration file
  vfio: use __aligned_u64 in struct vfio_device_ioeventfd
  vfio: use __aligned_u64 in struct vfio_device_gfx_plane_info
  vfio: trivially use __aligned_u64 for ioctl structs
  vfio-cdx: add bus mastering device feature support
  vfio: add bus master feature to device feature ioctl
  cdx: add support for bus mastering

Merge tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

- get rid of the fake support for coherent DMA allocation on coldfire
   with caches (Christoph Hellwig)

- add a few Kconfig dependencies so that Kconfig catches the use of
   invalid configurations (Christoph Hellwig)

- fix a type in dma-debug output (Chuck Lever)

- rewrite a comment in swiotlb (Sean Christopherson)

* tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: Fix a typo in a debugging eye-catcher
  swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
  m68k: remove unused includes from dma.c
  m68k: don't provide arch_dma_alloc for nommu/coldfire
  net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
  m68k: use the coherent DMA code for coldfire without data cache
  dma-direct: warn when coherent allocations aren't supported
  dma-direct: simplify the use atomic pool logic in dma_direct_alloc
  dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
  dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL

Merge tag 'pmdomain-v6.7' of git://git./linux/kernel/git/ulfh/linux-pm

Pull pmdomain updates from Ulf Hansson:

- Move Kconfig files into the pmdomain subsystem

- Drop use of genpd's redundant ->opp_to_performance_state() callback

- amlogic:
    - Add support for the T7 power-domains controller
    - Fix mask for the second NNA mem power-domain

- bcm: Fixup ASB register read and comparison for bcm2835-power

- imx: Fix device link problem for consumers of the pgc power-domain

- mediatek: Add support for the MT8365 power domains

- qcom:
    - Add support for the rpmhpds for SC8380XP power-domains
    - Add support for the rpmhpds for SM8650 power-domains
    - Add support for the rpmhpd clocks for SM7150
    - Add support for the rpmpds for MSM8917 (families) power-domains

- starfive: Add support for the JH7110 AON PMU

* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
  pmdomain: amlogic: Fix mask for the second NNA mem PD domain
  pmdomain: qcom: rpmhpd: Add SC8380XP power domains
  pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
  dt-bindings: power: rpmpd: Add SC8380XP support
  dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
  dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
  pmdomain: imx: Make imx pgc power domain also set the fwnode
  pmdomain: qcom: rpmpd: Add QM215 power domains
  pmdomain: qcom: rpmpd: Add MSM8917 power domains
  dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
  pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
  pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
  pmdomain: Use device_get_match_data()
  pmdomain: ti: add missing of_node_put
  pmdomain: mediatek: Add support for MT8365
  pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
  pmdomain: mediatek: Add support for WAY_EN operations
  pmdomain: mediatek: Unify configuration for infracfg and smi
  ...

Merge tag 'mmc-v6.7' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
" MMC core:
   - Enable host caps to be modified via debugfs to test speed-modes
   - Improve random I/O writes for 4k buffers for hsq enabled hosts

  MMC host:
   - atmel-mci/sdhci-of-at91: Aubin Constans takes over as maintainer
   - dw_mmc-starfive: Re-work tuning support
   - meson-gx: Fix bogus IRQ when using CMD_CFG_ERROR
   - mmci: Use peripheral flow control for the STM32 variant
   - renesas,sdhi: Add support for the RZ/G3S variant
   - sdhci-esdhc-imx: Optimize the manual tuning logic
   - sdhci-msm: Add support for the SM8650 variant
   - sdhci-npcm: Add driver to support the Nuvoton NPCM BMC variant
   - sdhci-pci-gli: Add workaround to allow GL9750 to enter ASPM L1.2"

* tag 'mmc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
  dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller
  mmc: meson-gx: Remove setting of CMD_CFG_ERROR
  MAINTAINERS: mmc: take over as maintainer of MCI & SDHCI MICROCHIP DRIVERS
  mmc: jz4740: Use device_get_match_data()
  mmc: sdhci-npcm: Add NPCM SDHCI driver
  dt-bindings: mmc: npcm,sdhci: Document NPCM SDHCI controller
  mmc: sdhci-pltfm: Make driver OF independent
  mmc: sdhci-pltfm: Drop unnecessary error messages in sdhci_pltfm_init()
  mmc: sdhci-pci: Switch to use acpi_evaluate_dsm_typed()
  mmc: debugfs: Allow host caps to be modified
  mmc: core: Always reselect card type
  mmc: mmci: use peripheral flow control for STM32
  mmc: vub300: replace deprecated strncpy with strscpy
  memstick: jmb38x_ms: Annotate struct jmb38x_ms with __counted_by
  mmc: starfive: Change tuning implementation
  dt-bindings: mmc: starfive: Remove properties from required
  mmc: hsq: Improve random I/O write performance for 4k buffers
  mmc: core: Allow dynamical updates of the number of requests for hsq
  mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2
  dt-bindings: mmc: renesas,sdhi: Document RZ/G3S support
  ...