Arnd Bergmann [Fri, 14 Apr 2023 15:59:07 +0000 (17:59 +0200)]
Merge tag 'aspeed-6.4-devicetree' of git://git./linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.4
- Fixes for romed8hm3 GPIO, asrock SPI clocks, bonnell eeprom
- Misc updates for various BMC systems
- Add AST2600 UDMA node
* tag 'aspeed-6.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
ARM: dts: aspeed: bonnell: Update eeprom size
ARM: dts: aspeed: bonnell: Remove MAC3
ARM: dts: aspeed: everest: Add reserved memory for TPM event log
ARM: dts: aspeed: mtmitchell: Enable NCSI
ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks
ARM: dts: aspeed: e3c246d4i: Add PECI device
ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LED
Link: https://lore.kernel.org/r/CACPK8XfmK5S=1PQjBQHb6daDR3qTWN-_NLoXP7+ZDCk13wDxcA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:58:26 +0000 (17:58 +0200)]
Merge tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 6.4, please pull the following:
- Rob fixes the GICv3 ITS node name for the Stingray platforms
- William adds the new-style High Speed SPI controller nodes to the BCA
SocS
- Rafal fixes the NAND controller interrupt name for BCM4908, LED
node(s) and procmon for BCM4908. He also adds support for the USB
ports, and declares USB triggered LEDs for the Netgear R8000P and
TP-Link C2300.
* tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name
arm64: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: stringray: Fix GICv3 ITS node name
Link: https://lore.kernel.org/r/20230410232606.1917803-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:57:53 +0000 (17:57 +0200)]
Merge tag 'arm-soc/for-6.4/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.4, please pull the following:
- William adds the new-style High Speed SPI controller node to the BCA
SoCs
* tag 'arm-soc/for-6.4/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: bcmbca: Add spi controller node
Link: https://lore.kernel.org/r/20230410232606.1917803-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fabio Estevam [Mon, 10 Apr 2023 22:03:00 +0000 (00:03 +0200)]
ARM: dts: nomadik: Replace deprecated spi-gpio properties
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230407162504.1683422-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230410220300.2431524-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:54:35 +0000 (17:54 +0200)]
Merge tag 'qcom-arm64-for-6.4' of https://git./linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:52:32 +0000 (17:52 +0200)]
Merge tag 'qcom-dts-for-6.4' of https://git./linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
* tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits)
dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3)
dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd.
ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible
ARM: dts: qcom: sdx55-t55: Move "status" property down
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
dt-bindings: arm: qcom: Add ipq9574 compatible
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
dt-bindings: qcom: add ipq5332 boards
...
Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:48:56 +0000 (17:48 +0200)]
Merge tag 'ti-k3-dt-for-v6.4' of git://git./linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.4
New features:
* Overlays for CPSW9G and CPSW5G on J721e-evm, J7200-evm
* Add support for AM625 based BeaglePlay, AM62-LP-SK
* Audio, RTC, watchdog support for AM625
* McSPI for J7200,j721e, j721s2, J784s4
* ADC for j721s2
* Crypto acceleration, CPSW2G for J784s4
Non critical fixes:
AM62, AM62a:
* Fix schematics error to increase DDR to 4GB on AM62a-SK
* L2Cache size fix (AM62a/AM625)
* ti,vbus-divider property to USB1 on AM625-SK
* Gpio count fix for AM625
J7200,j721e, j721s2, J784s4, AM68, AM69:
* ti,sci-dev-id for J784s4 NAVSS nodes
* j721e-sk: Drop application specific firmware name
* am68-sk: Fix the gpio expander lines for production version
Cleanups:
* Pinmux header move to dt folder (next kernel PR, we will drop the uapi header).
* j721e: ti,strobe-sel property cleanup for descoped HS400 MMC operation
* tag 'ti-k3-dt-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (34 commits)
arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support
arm64: dts: ti: Enable audio on SK-AM62(-LP)
arm64: dts: ti: k3-am62-main: Add McASP nodes
arm64: dts: ti: k3-j784s4: Add MCSPI nodes
arm64: dts: ti: k3-j721s2: Add MCSPI nodes
arm64: dts: ti: k3-j7200: Add MCSPI nodes
arm64: dts: ti: k3-j721e: Add MCSPI nodes
arm64: ti: dts: Add support for AM62x LP SK
arm64: dts: ti: Refractor AM625 SK dts
dt-bindings: arm: ti: k3: Add compatible for AM62x LP SK
arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1
arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2
arm64: dts: ti: Add k3-am625-beagleplay
dt-bindings: arm: ti: Add BeaglePlay
arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode
arm64: dts: ti: j7200-main: Add CPSW5G nodes
arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode
arm64: dts: ti: k3-j721e: Add CPSW9G nodes
arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G
arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC
...
Link: https://lore.kernel.org/r/20230410140521.3u3fftgnejakqnzj@shakable
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:47:46 +0000 (17:47 +0200)]
Merge tag 'renesas-dts-for-v6.4-tag2' of git://git./linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main
arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712
arm64: dts: renesas: r8a779g0: Add iommus to MMC node
arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779g0: Add IPMMU nodes
arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main
arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support
arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay
ARM: dts: r8a7790: Add PWM device nodes
ARM: dts: r8a7790: Add TPU device node
ARM: dts: marzen: Enable I2C support
ARM: dts: marzen: Add slide switches
ARM: dts: r8a7779: Add PWM support
dt-bindings: clock: r8a7779: Add PWM module clock
arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:47:14 +0000 (17:47 +0200)]
Merge tag 'v6.4-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into soc/dt
MMC-aliases for rk3288-veyron devices and some dts node adaptions
for yaml conversions recently merged into the drm tree.
* tag 'v6.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix rk3288 dp node
ARM: dts: rockchip: fix rk3288 lvds node
ARM: dts: rockchip: fix rk3288 dsi node
ARM: dts: rockchip: Add mmc aliases for rk3288-veyron devices
Link: https://lore.kernel.org/r/9713202.NyiUUSuA9g@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:44:52 +0000 (17:44 +0200)]
Merge tag 'v6.4-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: OrangePi R1 Plus, NanoPi R2C + R5C + R5S, Khadas Edge2.
General RK3588 additions: audio, thermal management, sdmmc, clock fixes,
watchdog; RK3588-Rock5b: rtc, pwm, audio.
Display support for Odroid Go Super and PinephonePro.
And some misc adaptions for recently merged yaml binding conversions.
* tag 'v6.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: correct panel supplies on Odroid Go Super
arm64: dts: rockchip: Add rk3588-rock-5b analog audio
arm64: dts: rockchip: Add I2S rk3588 nodes
arm64: dts: rockchip: Add rk3588s I2S nodes
arm64: dts: rockchip: Assign PLL_PPLL clock rate to 1.1 GHz on rk3588s
arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s
arm64: dts: rockchip: add rk3588 thermal sensor
arm64: dts: rockchip: Add pwm-fan to rk3588-rock-5b
arm64: dts: rockchip: Enable RTC support for Rock 5B
arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
dt-bindings: Add doc for Xunlong OrangePi R1 Plus LTS
arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
dt-bindings: Add doc for FriendlyARM NanoPi R2C
arm64: dts: rockchip: Add touchscreen support to rk3399-pinephone-pro
arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro
dt-bindings: watchdog: rockchip: Add rockchip,rk3588-wdt string
arm64: dts: rockchip: Enable watchdog support for RK3588
arm64: dts: rockchip: remove hclk from dsi node on rk356x
arm64: dts: rockchip: rename vbus-supply to phy-supply in rk3566-box-demo.dts
arm64: dts: rockchip: fix rk3399 dp node
...
Link: https://lore.kernel.org/r/7289562.MhkbZ0Pkbq@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:42:27 +0000 (17:42 +0200)]
Merge tag 'sunxi-dt-for-6.4-1' of https://git./linux/kernel/git/sunxi/linux into soc/dt
- added D1 crypto node
- enabled DVFS on OrangePi PC2 board
- added GPIO line names on Nezha D1 board
- added suniv USB nodes and enabled on licheepi-nano
- new suniv boards: PopStick v1.1 and Lctech Pi
- added Allwinner T113-s DTSI
- added MangoPi MQ-R T113-s board variant
- swapped DMA names for A23, A31, A33, D1, H3, H5, V3s
* tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: add MangoPi MQ-R-T113 board
dt-bindings: arm: sunxi: document MangoPi MQ-R board names
ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi
dts: add riscv include prefix link
ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
ARM: dts: suniv: add device tree for PopStick v1.1
dt-binding: arm: sunxi: add two board compatible strings
dt-bindings: vendor-prefixes: add Source Parts and Lctech names
ARM: dts: suniv: licheepi-nano: enable USB
ARM: dts: suniv: add USB-related device nodes
riscv: dts: nezha-d1: add gpio-line-names
arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS
riscv: dts: allwinner: d1: Add crypto engine node
Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:28:58 +0000 (17:28 +0200)]
Merge tag 'imx-dt64-6.4' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.4:
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
* tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (87 commits)
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Add display pipeline components
arm64: dts: imx8mn: Add display pipeline components
arm64: dts: imx8mm: Add display pipeline components
arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
arm64: dts: imx8qxp: add cadence usb3 support
arm64: dts: imx8mq-librem5: add missing #clock-cells
arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema
arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema
arm64: dts: imx8mm-emcon: update pinctrl to match dtschema
arm64: dts: imx8mq-librem5: update pinctrl to match dtschema
arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema
arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema
arm64: dts: imx8mp: Add GPT blocks
arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm
arm64: dts: imx8dxl: drop clocks from scu clock controller
arm64: dts: imx8mp: verdin-yavia: drop disable-over-current
arm64: dts: imx8mq: tqma8mq-mba8mx: drop disable-over-current
arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3
arm64: dts: colibri-imx8x: Add iris v2 carrier board
...
Link: https://lore.kernel.org/r/20230408101928.280271-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:27:25 +0000 (17:27 +0200)]
Merge tag 'imx-dt-6.4' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm32 device tree changes for 6.4:
- New board device trees: Tolino Vison, chargebyte Tarragon,
new revision of the IOTA board.
- A couple of imx7d-remarkable2 update to enable cyttsp5 touch and
BD71815 PMIC.
- A series from Oleksij Rempel to configure Ethernet reference clock
from device tree.
- A series from Stefan Wahren to use label references for i.MX28 based
boards.
* tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx6ull: Add chargebyte Tarragon support
ARM: dts: imx: Add devicetree for Tolino Vison
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"
ARM: dts: imx6dl-yapp4: Move status to the end of property list
ARM: dts: imx6dl-yapp4: Move phy reset into switch node
ARM: dts: imx28-tx28: add SPDX-License-Identifier
ARM: dts: imx28-ts4600: Convert to use label references
ARM: dts: imx28-evk: Convert to use label references
ARM: dts: imx28-duckbill-2: Include base board
ARM: dts: imx28-duckbill: Convert to use label references
ARM: dts: imx28-
cfa10036: Convert to use label references
ARM: dts: imx28-apx4devkit: Convert to use label references
ARM: dts: imx28-m28/sps1: Convert to use label references
ARM: dts: imx28-apf28: Convert to use label references
ARM: dts: imx7d-remarkable2: Enable the rohm,
bd71815
ARM: dts: imx7d-remarkable2: Enable the cyttsp5
ARM: dts: imx6dl-yapp4: Use reset-gpios property name
ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent
ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
...
Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 15:25:19 +0000 (17:25 +0200)]
Merge tag 'imx-bindings-6.4' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.4:
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
* tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples
dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3
dt-bindings: arm: fsl: add compatible string for Tolino Vision
dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+
dt-bindings: arm: fsl: Add colibri-imx8x carrier boards
dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example
dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name
dt-bindings: arm: fsl: Fix copy-paste error in comment
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
Arnd Bergmann [Fri, 14 Apr 2023 13:24:58 +0000 (15:24 +0200)]
Merge tag 'stm32-dt-for-v6.4-1' of git://git./linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.4, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add FMC support.
- Add QSPI support.
- Add 8 UART instances nodes.
- Enable UART on STM32MP135F-DK:
-UART1/UART8 used on expansion connector.
-UART2 used for BT.
-UART4 used for console.
- STMP32MP15:
- Add STM32MP151 support ( documentation + machine).
- Uart fixes (slew rate, aliases clean-up).
- Fix GPU YAMl issue.
* tag 'stm32-dt-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: stm32: add initial documentation for STM32MP151
ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family
ARM: dts: stm32: add FMC support on STM32MP13x SoC family
ARM: dts: stm32: YAML validation fails for Argon Boards
ARM: dts: stm32: YAML validation fails for Odyssey Boards
ARM: dts: stm32: YAML validation fails for STM32MP15 ST Boards
ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk
ARM: dts: stm32: add pins for usart2/1/4/8 in stm32mp13-pinctrl
ARM: dts: stm32: add uart nodes on stm32mp13
ARM: dts: stm32: clean uart aliases on stm32mp15xx-exx boards
ARM: dts: stm32: clean uart aliases on stm32mp15xx-dkx boards
ARM: dts: stm32: fix slew-rate of USART2 on stm32mp15xx-dkx
ARM: stm32: add support for STM32MP151
ARM: dts: stm32: fix spi1 pin assignment on stm32mp15
ARM: dts: stm32: drop invalid simple-panel compatible on stm32mp157c-lxa
ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15xx-osd32 SoM
Link: https://lore.kernel.org/r/63987ed6-2813-15ff-e058-73312a730d61@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 13:24:00 +0000 (15:24 +0200)]
Merge tag 'riscv-dt-for-v6.4' of https://git./linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.4
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
riscv: dts: microchip: fix the mpfs' mailbox regs
riscv: dts: microchip: add mpfs specific macb reset support
Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 13:22:45 +0000 (15:22 +0200)]
Merge tag 'tegra-for-6.4-arm64-dt' of git://git./linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 13:21:05 +0000 (15:21 +0200)]
Merge tag 'tegra-for-6.4-arm-dt' of git://git./linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.4-rc1
There are several fixes and cleanups here for some of the older Tegra
consumer devices.
* tag 'tegra-for-6.4-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra30: Use cpu* labels
ARM: tegra30: peripherals: Add 266.5MHz nodes
ARM: tegra: asus-tf101: Fix accelerometer mount matrix
ARM: tegra: transformers: Bind RT5631 sound nodes
ARM: tegra: transformers: Update WM8903 sound nodes
Link: https://lore.kernel.org/r/20230406124804.970394-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 13:20:35 +0000 (15:20 +0200)]
Merge tag 'tegra-for-6.4-dt-bindings' of git://git./linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.4-rc1
This is a single patch that drops unneeded quotes from various Tegra-
related device tree bindings.
* tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: nvidia: Drop unneeded quotes
Link: https://lore.kernel.org/r/20230406124804.970394-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 13:19:25 +0000 (15:19 +0200)]
Merge tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux into soc/dt
Apple SoC DT updates for 6.4.
This time we have the M2 (t8112) device trees and compatible updates,
as well as a minor fix for PCIe ports on the prior models.
* tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t600x: Disable unused PCIe ports
arm64: dts: apple: t8103: Disable unused PCIe ports
arm64: dts: apple: t8112: Initial t8112 (M2) device trees
dt-bindings: arm: apple: Add t8112 j413/j473/j493 compatibles
dt-bindings: clock: apple,nco: Add t8112-nco compatible
dt-bindings: i2c: apple,i2c: Add apple,t8112-i2c compatible
dt-bindings: pinctrl: apple,pinctrl: Add apple,t8112-pinctrl compatible
dt-bindings: pci: apple,pcie: Add t8112 support
dt-bindings: nvme: apple: Add apple,t8112-nvme-ans2 compatible string
dt-bindings: mailbox: apple,mailbox: Add t8112 compatibles
dt-bindings: iommu: apple,sart: Add apple,t8112-sart compatible string
dt-bindings: interrupt-controller: apple,aic2: Add apple,t8112-aic compatible
dt-bindings: arm: cpus: Add apple,avalanche & blizzard compatibles
dt-bindings: watchdog: apple,wdt: Add t8112-wdt compatible
dt-bindings: arm: apple: apple,pmgr: Add t8112-pmgr compatible
dt-bindings: power: apple,pmgr-pwrstate: Add t8112 compatible
Link: https://lore.kernel.org/r/7263df01-aebc-2db5-f074-4805e0ae9fbc@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 13:16:22 +0000 (15:16 +0200)]
Merge tag 'samsung-dt-6.4' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 14 Apr 2023 13:13:22 +0000 (15:13 +0200)]
Merge tag 'samsung-dt64-6.4' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Chia-Wei Wang [Mon, 20 Mar 2023 08:11:33 +0000 (16:11 +0800)]
ARM: dts: aspeed-g6: Add UDMA node
Add the device tree node for the UART DMA (UDMA) controller.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Link: https://lore.kernel.org/r/20230320081133.23655-6-chiawei_wang@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Delphine CC Chiu [Wed, 29 Mar 2023 08:32:35 +0000 (16:32 +0800)]
ARM: dts: aspeed: greatlakes: add mctp device
Add mctp node on I2C bus
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Link: https://lore.kernel.org/r/20230329083235.24123-3-Delphine_CC_Chiu@Wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Delphine CC Chiu [Wed, 29 Mar 2023 08:32:34 +0000 (16:32 +0800)]
ARM: dts: aspeed: greatlakes: Add gpio names
Add GPIO names for SOC lines.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20230329083235.24123-2-Delphine_CC_Chiu@Wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Lakshmi Yadlapati [Wed, 12 Apr 2023 05:23:05 +0000 (00:23 -0500)]
ARM: dts: aspeed: p10bmc: Change power supply info
Bonnell system supports new ACBEL FSG032 power supply on
I2C addresses 5A and 5B. Update the device tree with new
power supply information and device addresses.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230412052305.1369521-6-lakshmiy@us.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Marek Vasut [Thu, 6 Apr 2023 16:01:15 +0000 (18:01 +0200)]
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
Add DT compatible for Data Modul i.MX8M Plus eDM SBC board.
This is an evaluation board for various custom display units.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stefan Wahren [Tue, 4 Apr 2023 08:02:41 +0000 (10:02 +0200)]
dt-bindings: arm: fsl: Add chargebyte Tarragon
This adds the compatibles for the chargebyte Tarragon boards.
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stefan Wahren [Tue, 4 Apr 2023 08:02:38 +0000 (10:02 +0200)]
dt-bindings: vendor-prefixes: add chargebyte
chargebyte supplies hardware and software products for all
aspects of charging communication.
https://chargebyte.com/
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cristian Ciocaltea [Tue, 21 Mar 2023 21:56:20 +0000 (23:56 +0200)]
riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes
Commit
370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230321215624.78383-7-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Cristian Ciocaltea [Tue, 21 Mar 2023 21:56:19 +0000 (23:56 +0200)]
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
Commit
370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-6-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Cristian Ciocaltea [Tue, 21 Mar 2023 21:56:18 +0000 (23:56 +0200)]
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
Commit
370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-5-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Cristian Ciocaltea [Tue, 21 Mar 2023 21:56:17 +0000 (23:56 +0200)]
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
Commit
370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-4-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Cristian Ciocaltea [Tue, 21 Mar 2023 21:56:16 +0000 (23:56 +0200)]
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
Commit
370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-3-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Marek Vasut [Thu, 6 Apr 2023 16:01:16 +0000 (18:01 +0200)]
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR,
USB host and USB OTG.
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Roan van Dijk [Thu, 30 Mar 2023 09:16:13 +0000 (11:16 +0200)]
ARM: stm32: add initial documentation for STM32MP151
This patch adds initial documentation of STM32MP151 microprocessor (MPU)
based on Arm Cortex-A7.
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Marek Vasut [Wed, 5 Apr 2023 16:52:14 +0000 (18:52 +0200)]
arm64: dts: imx8mp: Add display pipeline components
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Plus.
This makes the DSI display pipeline available on this SoC.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Wed, 5 Apr 2023 16:52:13 +0000 (18:52 +0200)]
arm64: dts: imx8mn: Add display pipeline components
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Nano.
This makes the DSI display pipeline available on this SoC.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Wed, 5 Apr 2023 16:52:12 +0000 (18:52 +0200)]
arm64: dts: imx8mm: Add display pipeline components
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Mini.
This makes the DSI display pipeline available on this SoC.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stefan Wahren [Tue, 4 Apr 2023 08:02:42 +0000 (10:02 +0200)]
ARM: dts: imx6ull: Add chargebyte Tarragon support
This adds the support for chargebyte Tarragon, which is an Electrical
Vehicle Supply Equipment (EVSE) for AC charging stations
(according to IEC 61851, ISO 15118).
The Tarragon board is based on an i.MX6ULL SoC and is available in
4 variants (Master, Slave, SlaveXT, Micro), which provide more or
less peripherals.
Supported features:
* 512 MB DDR RAM
* eMMC
* Debug UART
* 100 Mbit Ethernet
* USB 2.0 Host interface
* Powerline communication (QCA700x)
* 2x RS485
* Digital in- and outputs (12 V)
* One-Wire master for external temp sensors
* 2x relay outputs
* 2x motor interfaces
Link: https://chargebyte.com/products/charging-station-communication/charge-control-c
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 27 Mar 2023 14:55:23 +0000 (10:55 -0400)]
arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
Enable USB3 controller, phy and typec related nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 27 Mar 2023 14:55:22 +0000 (10:55 -0400)]
arm64: dts: imx8qxp: add cadence usb3 support
There are cadence usb3.0 controller in 8qxp and 8qm.
Add usb3 node at common connect subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 28 Mar 2023 06:11:23 +0000 (14:11 +0800)]
arm64: dts: imx8mq-librem5: add missing #clock-cells
'#clock-cells' is a dependency of 'clock-output-names', following
binding doc, add it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 28 Mar 2023 03:36:40 +0000 (11:36 +0800)]
arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema
The dtschema requires 'grp' in the end, so update the name
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 28 Mar 2023 03:36:39 +0000 (11:36 +0800)]
arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema
The dtschema requires 'grp' in the end, so update the name
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 28 Mar 2023 03:36:38 +0000 (11:36 +0800)]
arm64: dts: imx8mm-emcon: update pinctrl to match dtschema
The dtschema requires 'grp' in the end, so update the name
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 28 Mar 2023 03:36:37 +0000 (11:36 +0800)]
arm64: dts: imx8mq-librem5: update pinctrl to match dtschema
The dtschema requires 'grp' in the end, so update the name.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 28 Mar 2023 03:36:36 +0000 (11:36 +0800)]
arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema
The dtschema requires 'grp' in the end, so update the name.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 28 Mar 2023 03:36:35 +0000 (11:36 +0800)]
arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema
The dtschema requires 'grp' in the end, so update the name.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Uwe Kleine-König [Mon, 27 Mar 2023 17:35:26 +0000 (19:35 +0200)]
arm64: dts: imx8mp: Add GPT blocks
The i.MX8MP includes the same GPT blocks as the i.MX6DL. Add all 6
instances.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 22 Mar 2023 05:25:03 +0000 (13:25 +0800)]
arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm
This is an NXP downstream property. And no binding doc, and no
driver use this property. So drop it
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Conor Dooley [Wed, 5 Apr 2023 21:20:55 +0000 (22:20 +0100)]
Merge branch 'riscv-jh7110_initial_dts' into riscv-dt-for-next
Merge Hal's series adding support for the new StarFive JH7110 SoC.
There's a few bindings here for core components that were not picked up
by the various maintainers for the subsystems (previously Palmer would
pick these up via the RISC-V tree) & the first two commits in the branch
are shared with the clk tree, since the dts depends on defines in the
dt-binding headers.
This is based on -rc2, as the board does not actually boot on -rc1
due to the bug Linus introduced.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Krzysztof Kozlowski [Sun, 26 Mar 2023 20:45:18 +0000 (22:45 +0200)]
arm64: dts: rockchip: correct panel supplies on Odroid Go Super
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cristian Ciocaltea [Sun, 2 Apr 2023 09:50:54 +0000 (12:50 +0300)]
arm64: dts: rockchip: Add rk3588-rock-5b analog audio
Add the necessary DT nodes for the Rock 5B board to enable the analog
audio support provided by the Everest Semi ES8316 codec.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-6-cristian.ciocaltea@collabora.com
[adapted to the fan addition I applied slightly earlier]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cristian Ciocaltea [Sun, 2 Apr 2023 09:50:53 +0000 (12:50 +0300)]
arm64: dts: rockchip: Add I2S rk3588 nodes
In addition to the five I2S/PCM/TDM controllers and the two I2S/PCM
controllers shared between the RK3588 and RK3588S SoCs, RK3588 provides
another group of four I2S/PCM/TDM controllers.
Add the DT nodes corresponding to the additional controllers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-5-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cristian Ciocaltea [Sun, 2 Apr 2023 09:50:52 +0000 (12:50 +0300)]
arm64: dts: rockchip: Add rk3588s I2S nodes
There are five I2S/PCM/TDM controllers and two I2S/PCM controllers
embedded in the RK3588 and RK3588S SoCs.
Add the DT nodes corresponding to the above mentioned Rockchip
controllers.
Also note RK3588 SoC contains four additional I2S/PCM/TDM controllers,
which are handled via a separate patch.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-4-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cristian Ciocaltea [Sun, 2 Apr 2023 09:50:51 +0000 (12:50 +0300)]
arm64: dts: rockchip: Assign PLL_PPLL clock rate to 1.1 GHz on rk3588s
The clock rate for PLL_PPLL has been wrongly initialized to 100 MHz
instead of 1.1 GHz. Fix it.
Fixes: c9211fa2602b ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-3-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cristian Ciocaltea [Sun, 2 Apr 2023 09:50:50 +0000 (12:50 +0300)]
arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s
Since commit
df4fdd0db475 ("dt-bindings: firmware: arm,scmi: Restrict
protocol child node properties") the following dtbs_check warning is
shown:
rk3588-rock-5b.dtb: scmi: protocol@14: Unevaluated properties are not
allowed ('assigned-clock-rates', 'assigned-clocks' were unexpected)
Because adding the missing properties to firmware/arm,scmi.yaml binding
document was not an acceptable solution, move SCMI_CLK_CPUB01 and
SCMI_CLK_CPUB23 assigned clocks to the related CPU nodes and also add
the missing SCMI_CLK_CPUL.
Additionally, adjust frequency to 816 MHz for all the above mentioned
assigned clocks, in order to match the firmware defaults.
Suggested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-2-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Sebastian Reichel [Tue, 4 Apr 2023 15:44:29 +0000 (17:44 +0200)]
arm64: dts: rockchip: add rk3588 thermal sensor
Add thermal sensor IP, which allows monitoring temperatures at
seven different places in the SoC:
* Chip Center
* CPU Cluster 1 (Dual A76 "Big" Cores)
* CPU Cluster 2 (Dual A76 "Big" Cores)
* CPU Cluster 0 (Quad A55 "Little" Cores)
* Power Domain Center
* Graphics Processing Unit
* Neural Processing Unit
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230404154429.51601-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cristian Ciocaltea [Tue, 4 Apr 2023 17:38:07 +0000 (20:38 +0300)]
arm64: dts: rockchip: Add pwm-fan to rk3588-rock-5b
Add the necessary DT changes for the Rock 5B board to enable support for
the PWM controlled heat sink fan.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230404173807.490520-3-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Shreeya Patel [Wed, 5 Apr 2023 08:27:11 +0000 (13:57 +0530)]
arm64: dts: rockchip: Enable RTC support for Rock 5B
Add DT node to enable RTC support for Rock 5B board.
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230405082711.46303-1-shreeya.patel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Emil Renner Berthing [Sat, 1 Apr 2023 11:19:33 +0000 (19:19 +0800)]
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
Add a minimal device tree for StarFive JH7110 VisionFive 2 board
which has version A and version B. Support booting and basic
clock/reset/pinctrl/uart drivers.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Jianlong Huang [Sat, 1 Apr 2023 11:19:32 +0000 (19:19 +0800)]
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
Add pin function definitions for StarFive JH7110 SoC.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Emil Renner Berthing [Sat, 1 Apr 2023 11:19:31 +0000 (19:19 +0800)]
riscv: dts: starfive: Add initial StarFive JH7110 device tree
Add initial device tree for the JH7110 RISC-V SoC by StarFive
Technology Ltd.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
[conor: squashed in the removal of the S7's non-existent mmu]
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Hal Feng [Sat, 1 Apr 2023 11:19:30 +0000 (19:19 +0800)]
dt-bindings: riscv: Add SiFive S7 compatible
Add a new compatible string in cpu.yaml for SiFive S7 CPU
core which is used on SiFive U74-MC core complex etc.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Emil Renner Berthing [Sat, 1 Apr 2023 11:19:29 +0000 (19:19 +0800)]
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
Add compatible string for StarFive JH7110 plic.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Emil Renner Berthing [Sat, 1 Apr 2023 11:19:28 +0000 (19:19 +0800)]
dt-bindings: timer: Add StarFive JH7110 clint
Add compatible string for the StarFive JH7110 clint.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Emil Renner Berthing [Sat, 1 Apr 2023 11:19:14 +0000 (19:19 +0800)]
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
Add bindings for the always-on clock and reset generator (AONCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Emil Renner Berthing [Sat, 1 Apr 2023 11:19:13 +0000 (19:19 +0800)]
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
Add bindings for the system clock and reset generator (SYSCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Ben Dooks [Fri, 27 Jan 2023 09:39:10 +0000 (09:39 +0000)]
arm64: tegra: Add vccmq on Jetson TX2
The TX2 SoM's SDIO WiFI card is connected via mmc@
3440000 however it does
not look like the upstream kernel is even bothering to power this (and
the regulator framework shuts down this power rail post kernel init).
The issue seems to be a missing link for vccq from the MAX77620 PMIC's LDO5
which is labeled vddio_sdmmc3 (and not used anywhere else) to the mmc@
3440000
node to ensure there is at leasr bus power.
Note this does not fix the WiFi issue on upstream kernels, there is still
something else missing that gets the BCM WiFi device to detect properly.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Tue, 31 Jan 2023 17:57:47 +0000 (17:57 +0000)]
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
Add the USB Type-C controller that is present on the Jetson AGX Orin
board. The ports for the Type-C controller are not populated yet, but
will be added later once the USB host and device support for Jetson AGX
Orin is enabled.
This is based upon a patch from Wayne Chang <waynec@nvidia.com>.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Krzysztof Kozlowski [Tue, 7 Feb 2023 19:28:49 +0000 (20:28 +0100)]
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
Just like on Exynos5250, Exynos5420 and Exynos5433 the MIPI phy is
actually part of the Power Management Unit system controller thus allow
it as PMU's child.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207192851.549242-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Steev Klimaszewski [Sun, 26 Mar 2023 23:38:12 +0000 (18:38 -0500)]
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
The Lenovo Thinkpad X13s has a WCN6855 Bluetooth controller on uart2,
add this.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326233812.28058-5-steev@kali.org
Bjorn Andersson [Sun, 26 Mar 2023 23:38:11 +0000 (18:38 -0500)]
arm64: dts: qcom: sc8280xp: Define uart2
Add the definition for uart2 for sc8280xp devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326233812.28058-4-steev@kali.org
Manivannan Sadhasivam [Thu, 16 Mar 2023 08:11:16 +0000 (13:41 +0530)]
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
The "mhi" region contains the debug registers that could be used to monitor
the PCIe link transitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230316081117.14288-19-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Thu, 16 Mar 2023 08:11:15 +0000 (13:41 +0530)]
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
The "mhi" region contains the debug registers that could be used to monitor
the PCIe link transitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230316081117.14288-18-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Thu, 16 Mar 2023 08:11:14 +0000 (13:41 +0530)]
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
The "mhi" region contains the debug registers that could be used to monitor
the PCIe link transitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230316081117.14288-17-manivannan.sadhasivam@linaro.org
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:13 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
Set line names for GPIO lines exposed by PMICs on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-16-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:12 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
Add GPIO controller nodes to PMICs that have the GPIO hooked up on
sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-15-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:09 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: pmic: add thermal zones
Add the thermal zones and associated alarm nodes for the PMICs that have
them hooked up on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-12-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:08 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
Add the RESIN input for sa8775p platforms' PMIC.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-11-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:07 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: pmic: add the power key
Add the power key node under the PON node for PMIC #0 on sa8775p.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-10-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:06 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: add the Power On device node
Add the PON node to PMIC #0 for sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-9-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:05 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
Add a new .dtsi file for sa8775p PMICs and add the four PMICs interfaced
to the SoC via SPMI. Enable the PMICs for sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-8-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:03 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: add the spmi node
Add the SPMI PMIC Arbiter node for SA8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-6-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:02 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: add the pdc node
Add the Power Domain Controller node for SA8775p.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-5-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:53:00 +0000 (14:53 +0200)]
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
Sort all children of the soc node by the first address in their reg
property. This was mostly already the case but there were some nodes
that didn't follow it so fix it now for consistency.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-3-brgl@bgdev.pl
Bartosz Golaszewski [Mon, 27 Mar 2023 12:52:59 +0000 (14:52 +0200)]
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
The file has inconsistent padding of the address part of soc node
children's reg properties. Fix it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-2-brgl@bgdev.pl
Krzysztof Kozlowski [Mon, 3 Apr 2023 13:23:28 +0000 (15:23 +0200)]
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
The bindings expect second Soundwire interrupt to be "wakeup" (Linux
driver takes by index):
sc8280xp-crd.dtb: soundwire-controller@
3330000: interrupt-names:1: 'wakeup' was expected
Fixes: c18773d162a6 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230403132328.61414-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Wed, 29 Mar 2023 19:41:23 +0000 (21:41 +0200)]
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
Enable both GPI DMAs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-6-2b1567c039d7@linaro.org
Konrad Dybcio [Wed, 29 Mar 2023 19:41:22 +0000 (21:41 +0200)]
arm64: dts: qcom: sdm845-tama: Enable GPU
Enable the A630 GPU and its GMU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-5-2b1567c039d7@linaro.org
Konrad Dybcio [Wed, 29 Mar 2023 19:41:21 +0000 (21:41 +0200)]
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
Enable ADSP, CDSP and Venus.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-4-2b1567c039d7@linaro.org
Konrad Dybcio [Wed, 29 Mar 2023 19:41:20 +0000 (21:41 +0200)]
arm64: dts: qcom: sdm845-tama: Add regulator-system-load to l14a/l28a
Add the properties to ensure the ever so delicate touchscreen setup
matches downstream.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-3-2b1567c039d7@linaro.org
Konrad Dybcio [Wed, 29 Mar 2023 19:41:19 +0000 (21:41 +0200)]
arm64: dts: qcom: sdm845-tama: Add Synaptics Touchscreen
Add required pins and RMI4 node to the common DT and remove it
from Akatsuki, as it uses a different touch.
Since the panels are super high tech proprietary incell, they
need to be handled with very precise timings. As such the panel
driver sets up the power rails and GPIOs and the touchscreen
driver *has to* probe afterwards.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-2-2b1567c039d7@linaro.org
Konrad Dybcio [Wed, 29 Mar 2023 19:41:18 +0000 (21:41 +0200)]
arm64: dts: qcom: sdm845-tama: Add display nodes
Add required nodes to support display on XZ2/XZ2c. XZ3 has a
different power rail setup and needs to be handled separately.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-1-2b1567c039d7@linaro.org
Adam Skladowski [Sat, 25 Mar 2023 11:28:52 +0000 (12:28 +0100)]
arm64: dts: msm8953: Pad regs to 8 digits
Follow other dtses and pad regs to 8 digits.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-4-a39.skl@gmail.com
Adam Skladowski [Sat, 25 Mar 2023 11:28:51 +0000 (12:28 +0100)]
arm64: dts: msm8953: Drop unsupported dwc3 flag
Property phy_mode according to binding checker does not exist,
drop it.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-3-a39.skl@gmail.com
Adam Skladowski [Sat, 25 Mar 2023 11:28:50 +0000 (12:28 +0100)]
arm64: dts: msm8953: Provide dsi_phy clocks to gcc
Provide clocks from dsi_phy to gcc, this will make
sure we don't fallback to global name lookup.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-2-a39.skl@gmail.com
Adam Skladowski [Sat, 25 Mar 2023 11:28:49 +0000 (12:28 +0100)]
arm64: dts: msm8953: Replace xo_board with rpmcc sourced xo
Assign RPM_SMD_XO_CLK_SRC from rpmcc in place
of fixed-clock where possible.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-1-a39.skl@gmail.com
Neil Armstrong [Fri, 24 Mar 2023 09:28:47 +0000 (10:28 +0100)]
arm64: dts: qcom: sm8450: remove invalid properties in cluster-sleep nodes
Fixes the following DT bindings check error:
domain-idle-states: cluster-sleep-0: 'idle-state-name', 'local-timer-stop' do not match any of the regexes:
'pinctrl-[0-9]+'
domain-idle-states: cluster-sleep-1: 'idle-state-name', 'local-timer-stop' do not match any of the regexes:
'pinctrl-[0-9]+'
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-2-0ca1bea1a843@linaro.org
projects / linux.git / log