Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]

qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h

Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h.  Only tcg_enabled() & friends sit in
qemu-common.h.  This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.

Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190610' into staging

Move softmmu tlb into CPUNegativeOffsetState

# gpg: Signature made Mon 10 Jun 2019 15:07:55 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190610: (39 commits)
  tcg/arm: Remove mostly unreachable tlb special case
  tcg/arm: Use LDRD to load tlb mask+table
  tcg/aarch64: Use LDP to load tlb mask+table
  cpu: Remove CPU_COMMON
  cpu: Move the softmmu tlb to CPUNegativeOffsetState
  cpu: Move icount_decr to CPUNegativeOffsetState
  cpu: Introduce CPUNegativeOffsetState
  cpu: Introduce cpu_set_cpustate_pointers
  cpu: Move ENV_OFFSET to exec/gen-icount.h
  target/xtensa: Use env_cpu, env_archcpu
  target/unicore32: Use env_cpu, env_archcpu
  target/tricore: Use env_cpu
  target/tilegx: Use env_cpu
  target/sparc: Use env_cpu, env_archcpu
  target/sh4: Use env_cpu, env_archcpu
  target/s390x: Use env_cpu, env_archcpu
  target/riscv: Use env_cpu, env_archcpu
  target/ppc: Use env_cpu, env_archcpu
  target/openrisc: Use env_cpu, env_archcpu
  target/nios2: Use env_cpu, env_archcpu
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tcg/arm: Remove mostly unreachable tlb special case

There was nothing armv7 specific about the bic+cmp sequence, however
looking at the set of guests more closely shows that the 8-bit immediate
operand for the bic can only be satisfied with one guest in tree:
baseline m-profile -- 10-bit pages with aligned 4-byte memory ops.
Therefore it does not seem useful to keep this path.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/arm: Use LDRD to load tlb mask+table

This changes the code generation for the tlb from e.g.

ldr      ip, [r6, #-0x10]
ldr      r2, [r6, #-0xc]
and      ip, ip, r4, lsr #8
ldrd     r0, r1, [r2, ip]!
ldr      r2, [r2, #0x18]

to

ldrd     r0, r1, [r6, #-0x10]
and      r0, r0, r4, lsr #8
ldrd     r2, r3, [r1, r0]!
ldr      r1, [r1, #0x18]

for armv7 hosts.  Rearranging the register allocation in
order to avoid overlap between the two ldrd pairs causes
the patch to be larger than it ordinarily would be.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Use LDP to load tlb mask+table

This changes the code generation for the tlb from e.g.

ldur     x0, [x19, #0xffffffffffffffe0]
ldur     x1, [x19, #0xffffffffffffffe8]
and      x0, x0, x20, lsr #8
add      x1, x1, x0
ldr      x0, [x1]
ldr      x1, [x1, #0x18]

to

ldp      x0, x1, [x19, #-0x20]
and      x0, x0, x20, lsr #8
add      x1, x1, x0
ldr      x0, [x1]
ldr      x1, [x1, #0x18]

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Remove CPU_COMMON

This macro is now always empty, so remove it.  This leaves the
entire contents of CPUArchState under the control of the guest
architecture.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move the softmmu tlb to CPUNegativeOffsetState

We have for some time had code within the tcg backends to
handle large positive offsets from env.  This move makes
sure that need not happen.  Indeed, we are able to assert
at build time that simple offsets suffice for all hosts.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move icount_decr to CPUNegativeOffsetState

Amusingly, we had already ignored the comment to keep this value
at the end of CPUState.  This restores the minimum negative offset
from TCG_AREG0 for code generation.

For the couple of uses within qom/cpu.c, without NEED_CPU_H, add
a pointer from the CPUState object to the IcountDecr object within
CPUNegativeOffsetState.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Introduce CPUNegativeOffsetState

Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Introduce cpu_set_cpustate_pointers

Consolidate some boilerplate from foo_cpu_initfn.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move ENV_OFFSET to exec/gen-icount.h

Now that we have ArchCPU, we can define this generically,
in the one place that needs it.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/xtensa: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace xtensa_env_get_cpu with env_archcpu.  The combination
CPU(xtensa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Move cpu_get_tb_cpu_state below the include of "exec/cpu-all.h"
so that the definition of env_cpu is available.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/unicore32: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace uc32_env_get_cpu with env_archcpu.  The combination
CPU(uc32_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/tricore: Use env_cpu

Cleanup in the boilerplate that each target must define.
Replace tricore_env_get_cpu with env_archcpu.  The combination
CPU(tricore_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/tilegx: Use env_cpu

Cleanup in the boilerplate that each target must define.
Replace tilegx_env_get_cpu with env_archcpu.  The combination
CPU(tilegx_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace sparc_env_get_cpu with env_archcpu.  The combination
CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sh4: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace sh_env_get_cpu with env_archcpu.  The combination
CPU(sh_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu.  The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace riscv_env_get_cpu with env_archcpu.  The combination
CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace ppc_env_get_cpu with env_archcpu.  The combination
CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/openrisc: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace openrisc_env_get_cpu with env_archcpu.  The combination
CPU(openrisc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace nios2_env_get_cpu with env_archcpu.  The combination
CPU(nios2_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/moxie: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace moxie_env_get_cpu with env_archcpu.  The combination
CPU(moxie_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace mips_env_get_cpu with env_archcpu.  The combination
CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/microblaze: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace mb_env_get_cpu with env_archcpu.  The combination
CPU(mb_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Move cpu_mmu_index below the include of "exec/cpu-all.h",
so that the definition of env_archcpu is available.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/m68k: Use env_cpu

Cleanup in the boilerplate that each target must define.
The combination CPU(m68k_env_get_cpu) should have used
ENV_GET_CPU to begin; use env_cpu now.

Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/lm32: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace lm32_env_get_cpu with env_archcpu.  The combination
CPU(lm32_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace x86_env_get_cpu with env_archcpu.  The combination
CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace hppa_env_get_cpu with env_archcpu.  The combination
CPU(hppa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace cris_env_get_cpu with env_archcpu.  The combination
CPU(cris_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Reindent op_helper.c

Fix all of the coding style errors in this file at once.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Reindent mmu.c

Fix all of the coding style errors in this file at once.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace arm_env_get_cpu with env_archcpu.  The combination
CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/alpha: Use env_cpu, env_archcpu

Cleanup in the boilerplate that each target must define.
Replace alpha_env_get_cpu with env_archcpu.  The combination
CPU(alpha_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Introduce env_archcpu

This will replace foo_env_get_cpu with a generic definition.
No changes to the target specific code so far.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Replace ENV_GET_CPU with env_cpu

Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Define ArchCPU

For all targets, do this just before including exec/cpu-all.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Define CPUArchState with typedef

For all targets, do this just before including exec/cpu-all.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Create struct CPUTLB

Move all softmmu tlb data into this structure.  Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out target/arch/cpu-param.h

For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.

Include this new file from exec/cpu-defs.h.

This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Fold CPUTLBWindow into CPUTLBDesc

Both structures are allocated once per mmu_idx.
There is no reason for them to be separate.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20190607-pull-request' into staging

usb-mtp: refactor the flow of usb_mtp_write_data

# gpg: Signature made Fri 07 Jun 2019 17:56:31 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20190607-pull-request:
  usb-mtp: refactor the flow of usb_mtp_write_data

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine Core queue, 2019-06-07

* Improve CPU hotplug error message
  (Laurent Vivier)
* Remove unused AccelClass::opt_name field
  (Wainer dos Santos Moschetta)

# gpg: Signature made Fri 07 Jun 2019 19:31:28 BST
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  accel: Remove unused AccelClass::opt_name attribute
  numa: improve cpu hotplug error message with a wrong node-id

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

accel: Remove unused AccelClass::opt_name attribute

The AccelType type was converted to AccelClass QOM
object on b14a0b7469f, and the original data type had
a field to store the option name which in turn was
used to search an accelerator. The lookup method
(accel_find) changed too, making the option field
unnecessary but it became AccelClass::opt_name despite
that. Therefore, and given that none accelerator
implementation sets AccelClass::opt_name, let's
remove this attribute.

Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190531165334.20403-2-wainersm@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

numa: improve cpu hotplug error message with a wrong node-id

On pseries, core-ids are strongly binded to a node-id by the command
line option. If an user tries to add a CPU to the wrong node, he has
an error but it is not really helpful:

  qemu-system-ppc64 ... -smp 1,maxcpus=64,cores=1,threads=1,sockets=1 \
                        -numa node,nodeid=0 -numa node,nodeid=1 ...

  (qemu) device_add power9_v2.0-spapr-cpu-core,core-id=30,node-id=1
  Error: node-id=1 must match numa node specified with -numa option

This patch improves this error message by giving to the user the good
node-id to use with the core-id he's providing

  Error: invalid node-id, must be 0

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190529160747.778-1-lvivier@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

usb-mtp: refactor the flow of usb_mtp_write_data

There's no functional change but the flow is (hopefully)
more consistent for both file and folder object types.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <20190401211712.19012-4-bsd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190607-2' into staging

s390x updates:
- tcg: finalize implementation for the vector facility and
  add it to the 'qemu' cpu model
- linux-user: properly generate ELF_HWCAP

# gpg: Signature made Fri 07 Jun 2019 15:14:42 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20190607-2: (34 commits)
  linux-user: elf: ELF_HWCAP for s390x
  s390x/tcg: Use tcg_gen_gvec_bitsel for VECTOR SELECT
  s390x: Bump the "qemu" CPU model up to a stripped-down z13
  s390x/tcg: We support the Vector Facility
  s390x/tcg: Allow linux-user to use vector instructions
  s390x/tcg: Implement VECTOR FP TEST DATA CLASS IMMEDIATE
  s390x/tcg: Implement VECTOR FP SUBTRACT
  s390x/tcg: Implement VECTOR FP SQUARE ROOT
  s390x/tcg: Implement VECTOR FP PERFORM SIGN OPERATION
  s390x/tcg: Implement VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
  s390x/tcg: Implement VECTOR FP MULTIPLY
  s390x/tcg: Implement VECTOR LOAD ROUNDED
  s390x/tcg: Implement VECTOR LOAD LENGTHENED
  s390x/tcg: Implement VECTOR LOAD FP INTEGER
  s390x/tcg: Implement VECTOR FP DIVIDE
  s390x/tcg: Implement VECTOR FP CONVERT TO LOGICAL 64-BIT
  s390x/tcg: Implement VECTOR FP CONVERT TO FIXED 64-BIT
  s390x/tcg: Implement VECTOR FP CONVERT FROM LOGICAL 64-BIT
  s390x/tcg: Implement VECTOR FP CONVERT FROM FIXED 64-BIT
  s390x/tcg: Implement VECTOR FP COMPARE (EQUAL|HIGH|HIGH OR EQUAL)
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 's390x-tcg-2019-06-07' into s390-next-staging

Finalize implementation of the "Vector Facility" for s390x TCG. Add it
to the QEMU CPU model, so it is enabled as default.
Also:
- One fix (and one workaround) for the STFLE instruction
- Fix the alignment of vector registers (and change the data type)
- Properly generate ELF_HWCAP for s390x for linux-user
- Use a gvec helper for VECTOR SELECT

# gpg: Signature made Fri 07 Jun 2019 02:58:01 PM CEST
# gpg:                using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg:                issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full]
# gpg:                 aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]

* tag 's390x-tcg-2019-06-07': (33 commits)
  linux-user: elf: ELF_HWCAP for s390x
  s390x/tcg: Use tcg_gen_gvec_bitsel for VECTOR SELECT
  s390x: Bump the "qemu" CPU model up to a stripped-down z13
  s390x/tcg: We support the Vector Facility
  s390x/tcg: Allow linux-user to use vector instructions
  s390x/tcg: Implement VECTOR FP TEST DATA CLASS IMMEDIATE
  s390x/tcg: Implement VECTOR FP SUBTRACT
  s390x/tcg: Implement VECTOR FP SQUARE ROOT
  s390x/tcg: Implement VECTOR FP PERFORM SIGN OPERATION
  s390x/tcg: Implement VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
  s390x/tcg: Implement VECTOR FP MULTIPLY
  s390x/tcg: Implement VECTOR LOAD ROUNDED
  s390x/tcg: Implement VECTOR LOAD LENGTHENED
  s390x/tcg: Implement VECTOR LOAD FP INTEGER
  s390x/tcg: Implement VECTOR FP DIVIDE
  s390x/tcg: Implement VECTOR FP CONVERT TO LOGICAL 64-BIT
  s390x/tcg: Implement VECTOR FP CONVERT TO FIXED 64-BIT
  s390x/tcg: Implement VECTOR FP CONVERT FROM LOGICAL 64-BIT
  s390x/tcg: Implement VECTOR FP CONVERT FROM FIXED 64-BIT
  s390x/tcg: Implement VECTOR FP COMPARE (EQUAL|HIGH|HIGH OR EQUAL)
  ...

Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190607-pull-request' into staging

curses: 32bit build fix.
egl: dmabuf modifier support.

# gpg: Signature made Fri 07 Jun 2019 14:18:41 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190607-pull-request:
  egl-helpers: add modifier support to egl_dmabuf_import_texture()
  egl-helpers: add modifier support to egl_get_fd_for_texture().
  vfio/display: set dmabuf modifier field
  console: add dmabuf modifier field.
  ui/curses: Fix build with -m32

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user: elf: ELF_HWCAP for s390x

Let's add all HWCAPs that we can support under TCG right now, when the
respective CPU facilities are enabled.

Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Use tcg_gen_gvec_bitsel for VECTOR SELECT

This replaces the target-specific implementations for VSEL.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x: Bump the "qemu" CPU model up to a stripped-down z13

We don't care about the other two missing base features:
- S390_FEAT_DFP_PACKED_CONVERSION
- S390_FEAT_GROUP_GEN13_PTFF

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: We support the Vector Facility

Let's add it to the max model, so we can enable it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Allow linux-user to use vector instructions

Once we unlock S390_FEAT_VECTOR for TCG, we want linux-user to be
able to make use of it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP TEST DATA CLASS IMMEDIATE

We can reuse float64_dcmask().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP SUBTRACT

Similar to VECTOR FP ADD.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP SQUARE ROOT

Simulate XxC=0 and ERM=0 (current mode), so we can use the existing
helper function.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP PERFORM SIGN OPERATION

The only FP instruction we can implement without an helper.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP MULTIPLY AND (ADD|SUBTRACT)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP MULTIPLY

Very similar to VECTOR FP DIVIDE.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR LOAD ROUNDED

We can reuse some of the infrastructure introduced for
VECTOR FP CONVERT FROM FIXED 64-BIT and friends.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR LOAD LENGTHENED

Take care of reading/indicating the 32-bit elements.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR LOAD FP INTEGER

We can reuse most of the infrastructure introduced for
VECTOR FP CONVERT FROM FIXED 64-BIT and friends.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP DIVIDE

We can reuse most of the infrastructure added for VECTOR FP ADD.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP CONVERT TO LOGICAL 64-BIT

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP CONVERT TO FIXED 64-BIT

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP CONVERT FROM LOGICAL 64-BIT

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP CONVERT FROM FIXED 64-BIT

1. We'll reuse op_vcdg() for similar instructions later, prepare for
   that.
2. We'll reuse vop64_2() later for other instructions.

We have to mangle the erm (effective rounding mode) and the m4 into
the simd_data(), and properly unmangle them again.

Make sure to restore the erm before triggering an exception.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP COMPARE (EQUAL|HIGH|HIGH OR EQUAL)

Provide for all three instructions all four combinations of cc bit and
s bit.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP COMPARE (AND SIGNAL) SCALAR

As far as I can see, there is only a tiny difference.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FP ADD

1. We'll reuse op_vfa() for similar instructions later, prepare for
   that.
2. We'll reuse vop64_3() for other instructions later.
3. Take care of modifying the vector register only if no trap happened.
 - on traps, flags are not updated and no elements are modified
 - traps don't modify the fpc flags
 - without traps, all exceptions of all elements are merged
4. We'll reuse check_ieee_exc() later when we need the XxC flag.

We have to check for exceptions after processing each element.
Provide separate handlers for single/all element processing. We'll do
the same for all applicable FP instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Export float_comp_to_cc() and float(32|64|128)_dcmask()

Vector floating-point instructions will require these functions, so
allow to use them from other files.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Introduce tcg_s390_vector_exception()

Handling is similar to data exceptions, however we can always store the
VXC into the lowore and the FPC:

z14 PoP, 6-20, "Vector-Exception Code"
    When a vector-processing exception causes a pro-
    gram interruption, a vector-exception code (VXC) is
    stored at location 147, and zeros are stored at loca-
    tions 144-146. The VXC is also placed in the DXC
    field of the floating-point-control (FPC) register if bit
    45 of control register 0 is one. When bit 45 of control
    register 0 is zero and bit 46 of control register 0 is
    one, the DXC field of the FPC register and the con-
    tents of storage at location 147 are unpredictable.

Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Store only the necessary amount of doublewords for STFLE

The PoP (z14, 7-382) says:
    Doublewords to the right of the doubleword in which the
    highest-numbered facility bit is assigned for a model
    may or may not be stored.

However, stack protection in certain binaries can't deal with that.
"gzip" example code:

f1b4:       a7 08 00 03             lhi     %r0,3
f1b8:       b2 b0 f0 a0             stfle   160(%r15)
f1bc:       e3 20 f0 b2 00 90       llgc    %r2,178(%r15)
f1c2:       c0 2b 00 00 00 01       nilf    %r2,1
f1c8:       b2 4f 00 10             ear     %r1,%a0
f1cc:       b9 14 00 22             lgfr    %r2,%r2
f1d0:       eb 11 00 20 00 0d       sllg    %r1,%r1,32
f1d6:       b2 4f 00 11             ear     %r1,%a1
f1da:       d5 07 f0 b8 10 28       clc     184(8,%r15),40(%r1)
f1e0:       a7 74 00 06             jne     f1ec <file_read@@Base+0x1bc>
f1e4:       eb ef f1 30 00 04       lmg     %r14,%r15,304(%r15)
f1ea:       07 fe                   br      %r14
f1ec:       c0 e5 ff ff 9d 6e       brasl   %r14,2cc8 <__stack_chk_fail@plt>

In QEMU, we currently have:
    max_bytes = 24
the code asks for (3 + 1) doublewords == 32 bytes.

If we write 32 bytes instead of only 24, and return "2 + 1" doublewords
("one less than the number of doulewords needed to contain all of the
 facility bits"), the example code detects a stack corruption.

In my opinion, the code is wrong. However, it seems to work fine on
real machines. So let's limit storing to the minimum of the requested
and the maximum doublewords.

Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Fix max_byte detection for stfle

used_stfl_bytes is 0, before initialized via prepare_stfl() on the
first invocation. We have to move the calculation of max_bytes after
prepare_stfl().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x: Use uint64_t for vector registers

CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x: Align vector registers to 16 bytes

11e2bfef7990 ("tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store")
revealed that the vregs are not aligned to 16 bytes. Align them to
16 bytes, to avoid segfault'ing on x86.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR STRING RANGE COMPARE

Unfortunately, there is no easy way to avoid looping over all elements
in v2. Provide specialized variants for !cc,!rt/!cc,rt/cc,!rt/cc,rt and
all element types. Especially for different values of rt, the compiler
might be able to optimize the code a lot.

Add s390_vec_write_element().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR ISOLATE STRING

Logic mostly courtesy of Richard H.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FIND ELEMENT NOT EQUAL

Similar to VECTOR FIND ELEMENT EQUAL. Core logic courtesy of Richard H.

Add s390_vec_read_element() that can deal with element sizes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FIND ELEMENT EQUAL

Core logic courtesy of Richard H.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

s390x/tcg: Implement VECTOR FIND ANY ELEMENT EQUAL

Complicated stuff. Provide two different helpers for CC an !CC handling.
We might want to add more helpers later.

zero_search() and match_index() are courtesy of Richard H.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

MAINTAINERS: cover tests/migration/s390x/

The generic s390 section looks like the best resting place.

Message-Id: <20190529091243.25562-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-7-2019' into staging

MIPS Queue for June 7th, 2019

# gpg: Signature made Fri 07 Jun 2019 10:59:15 BST
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-jun-7-2019:
  tests/tcg: target/mips: Add README for MSA tests
  tests/tcg: target/mips: Add tests for MSA FP max/min instructions
  tests/tcg: target/mips: Add utility function reset_msa_registers()
  tests/tcg: target/mips: Move four tests to a better location
  tests/tcg: target/mips: Add tests for MSA shift instructions
  tests/tcg: target/mips: Amend and rearrange MSA wrappers
  target/mips: Unroll loops in helpers for MSA logic instructions
  target/mips: Outline places for future MSA helpers
  target/mips: Fix block-comment-related issues in msa_helper.c
  target/mips: Fix space-related format issues in msa_helper.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/tcg: target/mips: Add README for MSA tests

Add README for MSA tests. This is just to explain how to run tests even
without Makefile. Makefile will be provided later on.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-11-git-send-email-aleksandar.markovic@rt-rk.com>

tests/tcg: target/mips: Add tests for MSA FP max/min instructions

Add tests for MSA FP max/min instructions. This includes following
instructions:

  * FMAX.W - float maximum (words)
  * FMAX.D - float maximum (doublewords)
  * FMAX_A.W - float maximum absolute (words)
  * FMAX_A.D - float maximum absolute (doublewords)
  * FMIN.W - float minimum (words)
  * FMIN.D - float minimum (doublewords)
  * FMIN_A.W - float minimum absolute (words)
  * FMIN_A.D - float minimum absolute (doublewords)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-10-git-send-email-aleksandar.markovic@rt-rk.com>

tests/tcg: target/mips: Add utility function reset_msa_registers()

Add function reset_msa_registers() and utilize it in each MSA test.
This is needed to ensure independency of test results on the state of
MSA registers before test execution. This also allows for correction
of tests for VSHF* instructions, that are now independent on the
previous state of MSA registers.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-9-git-send-email-aleksandar.markovic@rt-rk.com>

tests/tcg: target/mips: Move four tests to a better location

Move tests for <MUL|MULR>_Q.<H|B> from "integer multiply" directory
to "fixed-point multiply" directory, since they do not operate on
integers, but on fixed point numbers.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-8-git-send-email-aleksandar.markovic@rt-rk.com>

tests/tcg: target/mips: Add tests for MSA shift instructions

Add tests for MSA shift instructions. This includes following
instructions:

  * SLL.B - shift left logical (bytes)
  * SLL.H - shift left logical (halfwords)
  * SLL.W - shift left logical (words)
  * SLL.D - shift left logical (doublewords)
  * SRA.B - shift right arithmetic (bytes)
  * SRA.H - shift right arithmetic (halfwords)
  * SRA.W - shift right arithmetic (words)
  * SRA.D - shift right arithmetic (doublewords)
  * SRAR.B - shift right arithmetic rounded (bytes)
  * SRAR.H - shift right arithmetic rounded (halfwords)
  * SRAR.W - shift right arithmetic rounded (words)
  * SRAR.D - shift right arithmetic rounded (doublewords)
  * SRL.B - shift right logical (bytes)
  * SRL.H - shift right logical (halfwords)
  * SRL.W - shift right logical (words)
  * SRL.D - shift right logical (doublewords)
  * SRLR.B - shift right logical rounded (bytes)
  * SRLR.H - shift right logical rounded (halfwords)
  * SRLR.W - shift right logical rounded (words)
  * SRLR.D - shift right logical rounded (doublewords)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-7-git-send-email-aleksandar.markovic@rt-rk.com>

tests/tcg: target/mips: Amend and rearrange MSA wrappers

Amend and rearrange MSA wrappers to follow the same organization as
in MSA tests.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-6-git-send-email-aleksandar.markovic@rt-rk.com>

target/mips: Unroll loops in helpers for MSA logic instructions

Unroll loops in helpers for MSA logic instructions for better
performance.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-5-git-send-email-aleksandar.markovic@rt-rk.com>

target/mips: Outline places for future MSA helpers

Outline places for future MSA helpers to follow the same organization
as in MSA tests.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-4-git-send-email-aleksandar.markovic@rt-rk.com>

egl-helpers: add modifier support to egl_dmabuf_import_texture()

Check and use QemuDmaBuf->modifier in egl_dmabuf_import_texture()
for dmabuf imports.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190529072144.26737-5-kraxel@redhat.com

egl-helpers: add modifier support to egl_get_fd_for_texture().

Add modifier parameter to egl_get_fd_for_texture(), to return the used
modifier on dmabuf exports.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190529072144.26737-4-kraxel@redhat.com

vfio/display: set dmabuf modifier field

Fill the new QemuDmaBuf->modifier field properly from plane info.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 20190529072144.26737-3-kraxel@redhat.com

console: add dmabuf modifier field.

dmabufs can have a format modifier (DRM_FORMAT_MOD_*) which is used for
tiled layouts for example.  Add a field to QemuDmaBuf so we can carry
around that information.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190529072144.26737-2-kraxel@redhat.com

ui/curses: Fix build with -m32

wchar_t may resolve to be an unsigned long on 32-bit architectures.
Using the %x conversion specifier will then give a compiler warning:

ui/curses.c: In function ‘get_ucs’:
ui/curses.c:492:49: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘wchar_t’ {aka ‘long int’} [-Werror=format=]
  492 |         fprintf(stderr, "Could not convert 0x%04x "
      |                                              ~~~^
      |                                                 |
      |                                                 unsigned int
      |                                              %04lx
  493 |                         "from wchar_t to a multibyte character: %s\n",
  494 |                         wch, strerror(errno));
      |                         ~~~
      |                         |
      |                         wchar_t {aka long int}
ui/curses.c:504:49: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘wchar_t’ {aka ‘long int’} [-Werror=format=]
  504 |         fprintf(stderr, "Could not convert 0x%04x "
      |                                              ~~~^
      |                                                 |
      |                                                 unsigned int
      |                                              %04lx
  505 |                         "from a multibyte character to UCS-2 : %s\n",
  506 |                         wch, strerror(errno));
      |                         ~~~
      |                         |
      |                         wchar_t {aka long int}

Fix this by casting the wchar_t value to an unsigned long and using %lx
as the conversion specifier.

Fixes: b7b664a4fe9a955338f2e11a0f7433b29c8cbad0
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20190527142540.23255-1-mreitz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

target/mips: Fix block-comment-related issues in msa_helper.c

Fix block-comment-related issues reported by checkpatch for file
msa_helper.c.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-3-git-send-email-aleksandar.markovic@rt-rk.com>