lasi: replace lasi_get_irq() with defined constants

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-29-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

lasi: move LASIState and associated QOM structures to lasi.h

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-28-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

lasi: move initialisation of iar and rtc to new lasi_reset() function

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-27-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

lasi: move register memory mapping from lasi.c to machine.c

The device register should be mapped directly by the board code.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-26-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

lasi: move memory region initialisation to new lasi_init() function

Create a new lasi_init() instance initialisation function and move the LASI
memory region initialisation into it. Rename the existing lasi_init() function
to lasi_initfn() for now.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-25-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

lasi: checkpatch fixes

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-24-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move from hw/hppa to hw/pci-host

Move the DINO device implementation from hw/hppa to hw/pci-host so that it is
located with all the other PCI host bridges.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-23-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move DINO HPA constants from hppa_hardware.h to dino.h

This is to allow us to decouple the DINO device from the board logic.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-22-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: use numerical constant for iar0 and iar1 reset values

This is to allow us to decouple the DINO device from the board logic. The choice
of using a hard-coded constant (along with a comment) is to match how this is
already done for toc_addr. If it is decided later that these values need to be
configurable then they can easily be converted to qdev properties.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-21-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

hppa: move dino_init() from dino.c to machine.c

Now that dino_init() is completely decoupled from dino.c it can be moved to
machine.c with the rest of the board configuration.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-20-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: remove unused dino_set_timer_irq() IRQ handler

According to the comments in dino.c the timer IRQ is unused, so remove the empty
dino_set_timer_irq() handler function and simply pass NULL to mc146818_rtc_init()
in machine.c instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-19-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: wire up serial IRQ using a qdev GPIO in machine.c

This makes it unnecessary to allocate a separate IRQ for the serial port.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-18-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: define IRQ inputs as qdev GPIOs

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-17-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino.h: add defines for DINO IRQ numbers

This is to allow the DINO IRQs to be defined as qdev GPIOs.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-16-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

machine.c: map DINO device during board configuration

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-15-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: change dino_init() to return the DINO device instead of PCIBus

This is in preparation for using more qdev APIs during the configuration of the
HPPA generic machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-14-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build hppa machine

DINO refers to the GSC-PCI bridge device which will soon be handled separately,
however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated
by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU
MAINTAINERS file.

Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO
and also update the machine description accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: split declarations from dino.c into dino.h

This is to allow access to DinoState from outside dino.c. With the changes to
the headers it is now possible to remove the duplicate definition for
TYPE_DINO_PCI_HOST_BRIDGE from hppa_sys.h.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: return PCIBus from dino_init() using qdev_get_child_bus()

This allows access to the PCI bus without having to reference parent_obj directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-11-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: use QOM cast instead of directly referencing parent_obj

Use a QOM cast in both dino_chip_read_with_attrs() and dino_chip_write_with_attrs()
instead of directly referencing parent_obj.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-10-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move initial register configuration to new dino_pcihost_reset() function

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-9-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move PCI bus master address space setup to dino_pcihost_realize()

Add a new dino_pcihost_unrealize() function to remove the address space when the
device is unrealized.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-8-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move pci_setup_iommu() to dino_pcihost_init()

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: add memory-as property containing a link to the memory address space

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move PCI windows initialisation to dino_pcihost_init()

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move PCI bus initialisation to dino_pcihost_init()

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: move registers from dino_init() to DINO_PCI_BRIDGE init function

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

dino: checkpatch fixes

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* WHPX support for xcr0
* qga-wss fixes
* Meson conversions
* Removed -soundhw pcspk

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ2CEcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMHUAgAq6BXpuqyAMMnrylvt77qwGG37keV
# lxw8aGciztUJIZFi1dAxIuw2ohsFGdfxKKt1sEIUu33OSBeb1I786f2xuLF7t7Am
# An0Jd5I/V/9ClRrz2ITiLOCBzPTU3faY8h382OdnMJCkAFjjF5PIoECZWRBtjPVq
# B4jDKuredgCt4EGDViQr0R5om+bBdHQmHcPHTNIv3UsRu2RhzIieBy4qLBUADIMU
# wJeW0jIdtfE9gwfdjtdom1tDxxKNtYttyIAQY8SpSEGLHzpqfNW0Z3UFGcswIk8g
# QCJpsddJzKivvS3a8pm/3tKkSWmqcgGNH2b3CFEZ26MkkLZIOYiVmPGNqQ==
# =7/z9
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 07 May 2022 12:48:55 AM CDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
  pc: remove -soundhw pcspk
  configure, meson: move vhost options to Meson
  meson: use have_vhost_* variables to pick sources
  meson: create have_vhost_* variables
  build: move vhost-user-fs configuration to Kconfig
  build: move vhost-scsi configuration to Kconfig
  build: move vhost-vsock configuration to Kconfig
  configure: simplify vhost-net-{user, vdpa} configuration
  meson, virtio: place all virtio-pci devices under virtio_pci_ss
  configure: omit options with default values from meson command line
  meson: pass more options directly as -D
  configure: switch directory options to automatic parsing
  meson: always combine directories with prefix
  meson, configure: move --interp-prefix to meson
  meson, configure: move --with-pkgversion, CONFIG_STAMP to meson
  meson, configure: move bdrv whitelists to meson
  meson, configure: move --tls-priority to meson
  configure: switch string options to automatic parsing
  configure: move Windows flags detection to meson
  configure, meson: move iasl detection to meson
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

pc: remove -soundhw pcspk

The pcspk device is the only user of the init_isa function, and the only
-soundhw option which does not create a new device (it hacks into the
PCSpkState by hand).  Remove it, since it was deprecated.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: move vhost options to Meson

Finish the conversion by moving all the definitions and the constraint
checks to meson_options.txt and meson.build respectively.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: use have_vhost_* variables to pick sources

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: create have_vhost_* variables

When using Meson options rather than config-host.h, the "when" clauses
have to be changed to if statements (which is not necessarily great,
though at least it highlights which parts of the build are per-target
and which are not).

Do that before moving vhost logic to meson.build, though for now
the variables are just based on config-host.mak data.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

build: move vhost-user-fs configuration to Kconfig

vhost-user-fs is a device and it should be possible to enable/disable
it with --without-default-devices, not --without-default-features.
Compute its default value in Kconfig to obtain the more intuitive
behavior.

In this case the configure options were undocumented, too.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

build: move vhost-scsi configuration to Kconfig

vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features.  Compute their default value in Kconfig to
obtain the more intuitive behavior.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

build: move vhost-vsock configuration to Kconfig

vhost-vsock and vhost-user-vsock are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features.  Compute their default value in Kconfig to
obtain the more intuitive behavior.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: simplify vhost-net-{user, vdpa} configuration

Cleanup to ease review of the conversion to meson.  vhost_net_user and
vhost_net_vdpa are never assigned anything in the command line parsing
loop, so they are always equal to $vhost_user and $vhost_vdpa.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson, virtio: place all virtio-pci devices under virtio_pci_ss

Since a sourceset already exists for this, avoid unnecessary repeat
of CONFIG_VIRTIO_PCI.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: omit options with default values from meson command line

This has no functional change, it only makes the command line shorter
and nicer.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: pass more options directly as -D

If an option is not used anywhere by the configure script, it can be just
added to $meson_options even if it is not parsed by the automatically
generated bits in scripts/meson-buildoptions.sh.

The only slightly tricky case is $debug, where the

  if test "$fortify_source" = "yes" ; then
    QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
    debug=no
  fi

assignment is dead; configure sets fortify_source=no whenever debug=yes.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: switch directory options to automatic parsing

While prefix, bindir and qemu_suffix needs special treatment due to
differences between Windows and POSIX systems, everything else
needs no extra code in configure.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: always combine directories with prefix

Meson allows directories such as "bindir" to be relative to the prefix.  Right
now configure is forcing an absolute path, but that is not really necessary:
just make sure all uses of the directory variables are prefixed appropriately.
Do the same also for the options that are custom for QEMU, i.e. docdir and
qemu_firmwarepath.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson, configure: move --interp-prefix to meson

This is the last CONFIG_* entry in config-host.mak that had to be
special cased.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson, configure: move --with-pkgversion, CONFIG_STAMP to meson

The hash is now generated with a Python script.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson, configure: move bdrv whitelists to meson

Use the new support for string option parsing.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson, configure: move --tls-priority to meson

Use the new support for string option parsing.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: switch string options to automatic parsing

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: move Windows flags detection to meson

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: move iasl detection to meson

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson, configure: move Xen detection to meson

This is quite a complicated check.  I moved all the test programs to
a single file in scripts/, picking the right program with #if and a -D
flag in meson.build's cc.links() invocation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson-buildoptions: add support for string options

Allow using the buildoptions.json file for more options, namely anything
that is not a boolean or multiple-choice.

The mapping between configure and meson is messy for string options,
so allow configure to use to something other than the name in
meson_options.txt.  This will come in handy anyway for builtin
Meson options such as b_lto or b_coverage.

Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qga-vss: always build qga-vss.tlb when qga-vss.dll is built

Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220428181541.300619-1-kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: Add cross prefix for widl tool

The mingw-w64-tool package in Fedora provides widl tool with a
cross prefix, so adds it automatically for cross builds.

WIDL env can be used to redefine the path to tool.
The same behavior as with windres.

Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220428181525.300521-1-kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

WHPX: support for xcr0

Support for xcr0 to be able to enable xsave/xrstor. This by itself
is not sufficient to enable xsave/xrstor. WHPX XSAVE API's also
needs to be hooked up.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <MW2PR2101MB1116F07C07A26FD7A7ED8DCFC0780@MW2PR2101MB1116.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag '20220506-xtensa-1' of https://github.com/OSLL/qemu-xtensa into staging

target/xtensa updates for v7.1:

- expand test coverage to MMUv3, cores without windowed registers or
  loop option;
- import lx106 core (used in the esp8266 IoT chips);
- use tcg_constant_* in the front end;
- add clock input to the xtensa CPU;
- fix reset state of the xtensa MX PIC;
- implement cache testing opcodes.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmJ1o9oTHGpjbXZia2Jj
# QGdtYWlsLmNvbQAKCRBR+cyR+D+gRBimD/0TchAEBaa+Z5BOEzg42Nx640VQZvAV
# w6LogpteHxdpQ46ml/2jrL7SKhWLolkA+u/QFn5imfUK5rih2B6ICoucvqmCWAIU
# s2fiZyhkhs8r5VtgRhh2s8j48Ktly8BaaM3AliUh/NzTiqmM/p5hO5UoEQCE5L4M
# j1YLOIn12YSQr3YBxI/0S3Uy+xdseLqnybP226xaj96sAF5WtImoFBAn+WHl1jDN
# mWD+XvV3xZQTuekfsTYQIkJp6voMZth1EYpcrZeXaV2yuApOFNus2W2hItCYu49Y
# qDjlRRA49E1wVbp/A0T6pg/GXmCsCY6737TehEeZUH0iNeXlg5epyAnKwSqutdvk
# C/PTEFH5SjvBJ2xFlNJ6Ih5QFip0d7MwZvnoJgB2Q/o8weU/TT/aGWOwa2mDEQ8n
# bMaTrEZKluPVzj8QJiTOKQo9EOLIXYdT4m5RPPA5zIRcAY2tlfTbm3ubucIcI4mn
# M+33R6/QyYP82LkPtOn+o0bR6jmSWqSJhyH0dNNY2oDXIBjke9K1e7q1F57pyQ4h
# Tl8MOv+dh5mG/d7Ien1HDU+WD7/U/a2kLz3xAUlxltWP2FFiQiYg/4cBYhZ6VEMH
# am4Mw6oCqpWsN5IpMl7s8ASuf7KK9jnWl7bbzHKJVJLyLpYTHjWhAnWk6Z7xFQGc
# +whHrCJumwSvLA==
# =18f4
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 06 May 2022 05:40:26 PM CDT
# gpg:                using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg:                issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg:                 aka "Max Filippov <max.filippov@cogentembedded.com>" [undefined]
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB  17D8 51F9 CC91 F83F A044

* tag '20220506-xtensa-1' of https://github.com/OSLL/qemu-xtensa:
  target/xtensa: implement cache test option opcodes
  tests/tcg/xtensa: fix vectors and checks in timer test
  tests/tcg/xtensa: enable mmu tests for MMUv3
  tests/tcg/xtensa: enable autorefill phys_mem tests for MMUv3
  tests/tcg/xtensa: remove dependency on the loop option
  tests/tcg/xtensa: fix watchpoint test
  tests/tcg/xtensa: restore vecbase SR after test
  tests/tcg/xtensa: fix build for cores without windowed registers
  hw/xtensa: fix reset value of MIROUT register of MX PIC
  target/xtensa: add clock input to xtensa CPU
  target/xtensa: import core lx106
  target/xtensa: use tcg_constant_* for remaining opcodes
  target/xtensa: use tcg_constant_* for FPU conversion opcodes
  target/xtensa: use tcg_constant_* for numbered special registers
  target/xtensa: use tcg_constant_* for TLB opcodes
  target/xtensa: use tcg_constant_* for exceptions
  target/xtensa: use tcg_contatnt_* for numeric literals
  target/xtensa: fix missing tcg_temp_free in gen_window_check

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/xtensa: implement cache test option opcodes

We don't model caches, so for l*ct opcodes return tags with all bits
(including Valid) set to 0. For all other opcodes don't do anything.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

tests/tcg/xtensa: fix vectors and checks in timer test

Timer test assumes that timer 0 IRQ has level 1 and other timers have
higher level IRQs. This assumption is not correct and the levels may be
arbitrary. Fix that assumption by providing TIMER*_VECTOR macro and
using it for vector selection and by making the check for the timer
exception cause conditional.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

tests/tcg/xtensa: enable mmu tests for MMUv3

MMU test suite is disabled for cores that have spanning TLB way, i.e.
for all MMUv3 cores. Instead of disabling it make testing region virtual
addresses explicit and invalidate TLB mappings for entries that conflict
with the test.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

tests/tcg/xtensa: enable autorefill phys_mem tests for MMUv3

Autorefill tests in the phys_mem test suite are disabled for cores that
have spanning TLB way, i.e. for all MMUv3 cores. Instead of disabling it
invalidate TLB mappings for entries that conflict with the test.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

tests/tcg/xtensa: remove dependency on the loop option

xtensa core may not have the loop option, but still have timers. Don't
use loop opcode in the timer test.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

tests/tcg/xtensa: fix watchpoint test

xtensa core may have only one set of DBREAKA/DBREAKC registers. Don't
hardcode register numbers in the test as 0 and 1, use macros that only
index valid DBREAK* registers.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

tests/tcg/xtensa: restore vecbase SR after test

Writing garbage into the vecbase SR results in hang in the subsequent
tests that expect to raise an exception. Restore vecbase SR to its
reset value after the test.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

tests/tcg/xtensa: fix build for cores without windowed registers

Don't try to initialize windowbase/windowstart in crt.S if they don't
exist.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

hw/xtensa: fix reset value of MIROUT register of MX PIC

MX PIC comes out of reset with IRQ routing registers set to 0, thus
not delivering any external IRQ to any connected CPU by default.
Fix the model to match the hardware.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: add clock input to xtensa CPU

Create clock input for the xtensa CPU device and initialize its
frequency to the default core frequency specified in the config.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: import core lx106

This is the core used in e.g. ESP8266 chips. Importing them
using import_core.sh, with the required files sourced from

https://github.com/espressif/xtensa-overlays

core-lx106.c was generated by the script; the only change is removing
the reference to core-matmap.h which doesn't seem to be available.

Signed-off-by: Simon Safar <simon@simonsafar.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20220423040835.29254-1-simon@simonsafar.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: use tcg_constant_* for remaining opcodes

- gen_jumpi passes target PC to the helper;
- gen_callw_slot uses callinc (1..3);
- gen_brcondi passes immediate field (less than 32 different possible
  values) to the helper;
- disas_xtensa_insn passes PC to the helpers;
- translate_entry passes PC, stack register number (0..15) and stack
  frame size to the helper;
- gen_check_exclusive passes PC and boolean flag to the helper;
- test_exceptions_retw passes PC to the helper;
- gen_check_atomctl passes PC to the helper;
- translate_ssai passes immediate shift amount (0..31) to the helper;
- gen_waiti passes next PC and an immediate (0..15) to the helper;

use tcg_constant_* for the constants listed above. Fold gen_waiti body
into the translate_waiti as it's the only user.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: use tcg_constant_* for FPU conversion opcodes

FPU conversion opcodes pass scale (range 0..15) and rounding mode to
their helpers. Use tcg_constant_* for them.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: use tcg_constant_* for numbered special registers

Numbered special registers are small arrays of consecutive SRs. Use
tcg_constant_* for the SR index.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: use tcg_constant_* for TLB opcodes

dtlb is a boolean flag, use tcg_constant_* for it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: use tcg_constant_* for exceptions

Use tcg_contant_* for exception number, exception cause, debug cause
code and exception PC.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: use tcg_contatnt_* for numeric literals

Replace tcg_const_* for numeric literals with tcg_constant_*.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

target/xtensa: fix missing tcg_temp_free in gen_window_check

pc and w are allocated with tcg_const_i32 but not freed in
gen_window_check. Use tcg_constant_i32 for them both.

Fixes: 2db59a76c421 ("target-xtensa: record available window in TB flags")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Merge tag 'vfio-updates-20220506.1' of https://gitlab.com/alex.williamson/qemu into staging

VFIO updates 2022-05-06

 * Defer IRQ routing commits to improve setup and resume latency (Longpeng)

 * Fix trace sparse mmap boundary condition (Xiang Chen)

 * Quiet misalignment warning from TPM device mapping (Eric Auger)

 * Misc cleanups (Yi Liu, Eric Auger)

# -----BEGIN PGP SIGNATURE-----
#
# iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmJ1hm8bHGFsZXgud2ls
# bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsi8cIP+wfOMh9YLAm6NC70Gd9q
# 7Z6Z3ql/5SYUF8AmsLZf3UPa1+bVQ4TcsjqN5tiaCx36iDXF39jkHM/w9Cd4sPuB
# 7ETmWndj6FwOI9PNpFmVoUrpONyLI3VuCNZqwhV1mlmTEnmCsE1PAvjjjPz51HDd
# +dnkIJsjoKqpzja9zotQnpWtx7O4iKGGAUx3oi4BbF47sG2az2GQnI/5L/Zj8dBO
# G3h+FCavSO6ODmIxX865ndZifN3BV1asazNDjFp7beUNFVrNCpzZkIkFGzhtx8yS
# npxw/27m2s/O+dJZIlWPMCH0H0ItIHpqntBziMopxCG3ELsnhJjAccg5aWi2okXM
# M0rmNu+BH9WKPJoqy8u89gZvebyhvtTuMQ1gDzZWkEe80LLfoB9Re/qvMuw2LBnv
# BSu8hUHCoX3Whnc7PoP11Y97uBW/uaH/LTagrqzIJIBWSniUCZaZUep6Ihg1wFFQ
# oTNKKiaer/jtzmCTFtGKC7dj/gGuKNvAO8l/yqWj3k7ssstllaOLOzjDmoD5bmZD
# jVaaAedOhFme5sGtgqcmFmNXA+r01PoKmopkHku74meCk+RCxV4i8xkVZGlREHpS
# YB7CsA8B8jcLQS9QfguFWreImhstaC0fOKRDXDGMGm9ikPThdtIE5oWt2c4fKz5Y
# Hi6FjfEsDoZNLs64lc4cyMEq
# =ShHn
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 06 May 2022 03:34:55 PM CDT
# gpg:                using RSA key 42F6C04E540BD1A99E7B8A90239B9B6E3BB08B22
# gpg:                issuer "alex.williamson@redhat.com"
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [undefined]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [undefined]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [undefined]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* tag 'vfio-updates-20220506.1' of https://gitlab.com/alex.williamson/qemu:
  vfio/common: Rename VFIOGuestIOMMU::iommu into ::iommu_mr
  vfio/pci: Use vbasedev local variable in vfio_realize()
  hw/vfio/pci: fix vfio_pci_hot_reset_result trace point
  vfio/common: remove spurious tpm-crb-cmd misalignment warning
  sysemu: tpm: Add a stub function for TPM_IS_CRB
  vfio/common: Fix a small boundary issue of a trace
  vfio: defer to commit kvm irq routing when enable msi/msix
  Revert "vfio: Avoid disabling and enabling vectors repeatedly in VFIO migration"
  vfio: simplify the failure path in vfio_msi_enable
  vfio: move re-enabling INTX out of the common helper
  vfio: simplify the conditional statements in vfio_msi_enable

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

vfio/common: Rename VFIOGuestIOMMU::iommu into ::iommu_mr

Rename VFIOGuestIOMMU iommu field into iommu_mr. Then it becomes clearer
it is an IOMMU memory region.

no functional change intended

Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio/pci: Use vbasedev local variable in vfio_realize()

Using a VFIODevice handle local variable to improve the code readability.

no functional change intended

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

hw/vfio/pci: fix vfio_pci_hot_reset_result trace point

"%m" format specifier is not interpreted by the trace infrastructure
and thus "%m" is output instead of the actual errno string. Fix it by
outputting strerror(errno).

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-2-yi.l.liu@intel.com
[aw: replace commit log as provided by Eric]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio/common: remove spurious tpm-crb-cmd misalignment warning

The CRB command buffer currently is a RAM MemoryRegion and given
its base address alignment, it causes an error report on
vfio_listener_region_add(). This region could have been a RAM device
region, easing the detection of such safe situation but this option
was not well received. So let's add a helper function that uses the
memory region owner type to detect the situation is safe wrt
the assignment. Other device types can be checked here if such kind
of problem occurs again.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-3-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

sysemu: tpm: Add a stub function for TPM_IS_CRB

In a subsequent patch, VFIO will need to recognize if
a memory region owner is a TPM CRB device. Hence VFIO
needs to use TPM_IS_CRB() even if CONFIG_TPM is unset. So
let's add a stub function.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linnux.ibm.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-2-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio/common: Fix a small boundary issue of a trace

It uses [offset, offset + size - 1] to indicate that the length of range is
size in most places in vfio trace code (such as
trace_vfio_region_region_mmap()) execpt trace_vfio_region_sparse_mmap_entry().
So change it for trace_vfio_region_sparse_mmap_entry(), but if size is zero,
the trace will be weird with an underflow, so move the trace and trace it
only if size is not zero.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1650100104-130737-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio: defer to commit kvm irq routing when enable msi/msix

In migration resume phase, all unmasked msix vectors need to be
setup when loading the VF state. However, the setup operation would
take longer if the VM has more VFs and each VF has more unmasked
vectors.

The hot spot is kvm_irqchip_commit_routes, it'll scan and update
all irqfds that are already assigned each invocation, so more
vectors means need more time to process them.

vfio_pci_load_config
  vfio_msix_enable
    msix_set_vector_notifiers
      for (vector = 0; vector < dev->msix_entries_nr; vector++) {
        vfio_msix_vector_do_use
          vfio_add_kvm_msi_virq
            kvm_irqchip_commit_routes <-- expensive
      }

We can reduce the cost by only committing once outside the loop.
The routes are cached in kvm_state, we commit them first and then
bind irqfd for each vector.

The test VM has 128 vcpus and 8 VF (each one has 65 vectors),
we measure the cost of the vfio_msix_enable for each VF, and
we can see 90+% costs can be reduce.

VF      Count of irqfds[*]  Original        With this patch

1st           65            8               2
2nd           130           15              2
3rd           195           22              2
4th           260           24              3
5th           325           36              2
6th           390           44              3
7th           455           51              3
8th           520           58              4
Total                       258ms           21ms

[*] Count of irqfds
How many irqfds that already assigned and need to process in this
round.

The optimization can be applied to msi type too.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-6-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Revert "vfio: Avoid disabling and enabling vectors repeatedly in VFIO migration"

Commit ecebe53fe993 ("vfio: Avoid disabling and enabling vectors
repeatedly in VFIO migration") avoids inefficiently disabling and
enabling vectors repeatedly and lets the unmasked vectors be enabled
one by one.

But we want to batch multiple routes and defer the commit, and only
commit once outside the loop of setting vector notifiers, so we
cannot enable the vectors one by one in the loop now.

Revert that commit and we will take another way in the next patch,
it can not only avoid disabling/enabling vectors repeatedly, but
also satisfy our requirement of defer to commit.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-5-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio: simplify the failure path in vfio_msi_enable

Use vfio_msi_disable_common to simplify the error handling
in vfio_msi_enable.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-4-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio: move re-enabling INTX out of the common helper

Move re-enabling INTX out, and the callers should decide to
re-enable it or not.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-3-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio: simplify the conditional statements in vfio_msi_enable

It's unnecessary to test against the specific return value of
VFIO_DEVICE_SET_IRQS, since any positive return is an error
indicating the number of vectors we should retry with.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-2-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Merge tag 'pull-ppc-20220505' of https://gitlab.com/danielhb/qemu into staging

ppc patch queue for 2022-05-05:

The star of the show in this PR is the 'Remove hidden usages of *env'
work done by Víctor, which impacts a lot of target/ppc code and we want
to get it landed ASAP so future target/ppc contributions can be based on
it.

Other changes:

- XIVE fixes in guest interrupt handling
- BookE debug interrupt fix
- vhost-user TARGET_PPC64 macro fix
- valgrind fixes in kvmppc functions

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYnQbpgAKCRA82cqW3gMx
# ZM1ZAQChjU/oBVDlhrlfInGjOcdXlM4l0R0pDQZ6dm1NYVqcvgD/WRNWj+tQ2H1V
# xmKXSzrGlDyYFu1uozfU8kvYJeHaKgw=
# =eRrg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 05 May 2022 01:47:02 PM CDT
# gpg:                using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28  3819 3CD9 CA96 DE03 3164

* tag 'pull-ppc-20220505' of https://gitlab.com/danielhb/qemu: (30 commits)
  target/ppc: Change MSR_* to follow POWER ISA numbering convention
  target/ppc: Add unused msr bits FIELDs
  target/ppc: Remove msr_de macro
  target/ppc: Remove msr_hv macro
  target/ppc: Remove msr_ts macro
  target/ppc: Remove msr_fe0 and msr_fe1 macros
  target/ppc: Remove msr_ep macro
  target/ppc: Remove msr_dr macro
  target/ppc: Remove msr_ir macro
  target/ppc: Remove msr_cm macro
  target/ppc: Remove msr_fp macro
  target/ppc: Remove msr_gs macro
  target/ppc: Remove msr_me macro
  target/ppc: Remove msr_pow macro
  target/ppc: Remove msr_ce macro
  target/ppc: Remove msr_ee macro
  target/ppc: Remove msr_ile macro
  target/ppc: Remove msr_ds macro
  target/ppc: Remove msr_le macro
  target/ppc: Remove msr_pr macro
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Change MSR_* to follow POWER ISA numbering convention

Today we have the issue where MSR_* values are the 'inverted order'
bit numbers from what the ISA specifies. e.g. MSR_LE is bit 63 but
is defined as 0 in QEMU.

Add a macro to be used to convert from QEMU order to ISA order.

This solution requires less changes than to use the already defined
PPC_BIT macro, which would turn MSR_* in masks instead of the numbers
itself.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-23-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Add unused msr bits FIELDs

Add FIELDs macros for msr bits that had an unused msr_* before.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-22-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_de macro

msr_de macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-21-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_hv macro

msr_hv macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-20-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_ts macro

msr_ts macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-19-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_fe0 and msr_fe1 macros

msr_fe0 and msr_fe1 macros hide the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-18-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_ep macro

msr_ep macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-17-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_dr macro

msr_dr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-16-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_ir macro

msr_ir macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-15-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_cm macro

msr_cm macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-14-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_fp macro

msr_fp macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-13-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_gs macro

msr_gs macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-12-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_me macro

msr_me macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-11-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove msr_pow macro

msr_pow macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-10-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>