media: sun6i-isp: params: Fix incorrect indentation

Remove a heading whitespace that results in a smatch warning.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: e3185e1d7c14 ("media: staging: media: Add support for the Allwinner A31 ISP")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun6i-isp: capture: Fix uninitialized variable use

While the stride_chroma variable was previously initialized to zero,
it's actually stride_chroma_div4 that is set to hardware registers.

Initialize it to zero instead to avoid an uninitialized variable use
and get rid of the associated smatch warning.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: e3185e1d7c14 ("media: staging: media: Add support for the Allwinner A31 ISP")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun6i-isp: proc: Declare subdev ops as static

The static keyword is missing in the v4l2 subdev ops definition for the
proc.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: e3185e1d7c14 ("media: staging: media: Add support for the Allwinner A31 ISP")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun6i-isp: proc: Error out on invalid port to fix warning

The enabled variable is only set for a valid port and used later,
which triggers an uninitialized use smatch warning. Explicitly error
out in that case to fix the warning.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: e3185e1d7c14 ("media: staging: media: Add support for the Allwinner A31 ISP")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun6i-isp: proc: Fix return code handling in stream off path

Explicitly set ret to zero on disable path to avoid a related smatch
warning. This makes initialization at declaration useless.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: e3185e1d7c14 ("media: staging: media: Add support for the Allwinner A31 ISP")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun8i-a83t-mipi-csi2: Clarify return code handling in stream off path

Explicitly set ret to zero instead of assigning it and overwriting it
later, which is a bit confusing to understand.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun6i-mipi-csi2: Clarify return code handling in stream off path

Explicitly set ret to zero instead of assigning it and overwriting it
later, which is a bit confusing to understand.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun6i-csi: capture: Remove useless ret initialization

There is no particular need to assign ret when declaring it as
it will be assigned before there is any chance to return it.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sun6i-csi: bridge: Error out on invalid port to fix warning

The enabled variable is only set for a valid port and used later,
which triggers an uninitialized use smatch warning. Explicitly error
out in that case to fix the warning.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: 0d2b746b1bef ("media: sun6i-csi: Add bridge v4l2 subdev with port management")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Merge tag 'br-v6.2i' of git://linuxtv.org/hverkuil/media_tree into media_stage

Tag branch

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* tag 'br-v6.2i' of git://linuxtv.org/hverkuil/media_tree: (31 commits)
  media: s5c73m3: Switch to GPIO descriptors
  media: i2c: s5k5baf: switch to using gpiod API
  media: i2c: s5k6a3: switch to using gpiod API
  media: imx: remove code for non-existing config IMX_GPT_ICAP
  media: si470x: Fix use-after-free in si470x_int_in_callback()
  media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
  media: coda: Add check for kmalloc
  media: coda: Add check for dcoda_iram_alloc
  dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
  media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
  media: s5k4ecgx: Delete driver
  media: s5k4ecgx: Switch to GPIO descriptors
  media: Switch to use dev_err_probe() helper
  headers: Remove some left-over license text in include/uapi/linux/v4l2-*
  headers: Remove some left-over license text in include/uapi/linux/dvb/
  media: usb: pwc-uncompress: Use flex array destination for memcpy()
  media: s5p-mfc: Fix to handle reference queue during finishing
  media: s5p-mfc: Clear workbit to handle error condition
  media: s5p-mfc: Fix in register read and write for H264
  media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
  ...

media: s5c73m3: Switch to GPIO descriptors

The driver has an option to pass in GPIO numbers from platform
data but this is not used in the kernel so delete this. Get
GPIO descriptors using the standard API and simplify the code,
gpiolib will handle any inversions.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: s5k5baf: switch to using gpiod API

This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: s5k6a3: switch to using gpiod API

This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes one of the last uses of of_get_gpio_flags().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: imx: remove code for non-existing config IMX_GPT_ICAP

There never was a config IMX_GPT_ICAP in the repository. So remove the code
conditional on this config and simplify the callers that just called empty
functions.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: si470x: Fix use-after-free in si470x_int_in_callback()

syzbot reported use-after-free in si470x_int_in_callback() [1].  This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.

The cause of this issue is that si470x_int_in_callback() is called for
freed urb.

si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start().  If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:

si470x_usb_driver_probe()
  ...
  si470x_start_usb()
    ...
    usb_submit_urb()
    retval = si470x_start()
    return retval
  if (retval < 0)
    free struct si470x_device object, but don't kill urb

This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted.  If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object.

Reported-by: syzbot+9ca7a12fd736d93e0232@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=94ed6dddd5a55e90fd4bab942aa4bb297741d977
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies

By moving support for the USB Syntek DC1125 Camera to staging, the
dependencies on MEDIA_USB_SUPPORT and MEDIA_CAMERA_SUPPORT were lost.

Fixes: 56280c64ecac ("media: stkwebcam: deprecate driver, move to staging")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: coda: Add check for kmalloc

As the kmalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: cb1d3a336371 ("[media] coda: add CODA7541 JPEG support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: coda: Add check for dcoda_iram_alloc

As the coda_iram_alloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: b313bcc9a467 ("[media] coda: simplify IRAM setup")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

dt-bindings: media: s5c73m3: Fix reset-gpio descriptor

The reset-gpios is described as xshutdown-gpios on the required
properties, as it is on the driver. Despite that, the device tree
example set the property 'reset-gpios' instead of the property
'xshutdown-gpios'.

Therefore, this patch updates the example to match the property specified
on the driver.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property

The Hantro G2 video decoder block sits behind an IOMMU. The device tree
binding needs a property to reference it. Without a reference for the
implementation to properly configure the IOMMU, it will fault and cause
the video decoder to fail.

Add an "iommus" property for referring to the IOMMU port. The master ID
in the example is taken from the IOMMU fault error message on Linux,
and the number seems to match the order in the user manual's IOMMU
diagram.

Fixes: fd6be12716c4 ("media: dt-bindings: allwinner: document H6 Hantro G2 binding")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s5k4ecgx: Delete driver

This driver was until the previous patch unused in the kernel
and depended on platform data that no board was defining.
As no users can be proven to exist, delete the driver.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s5k4ecgx: Switch to GPIO descriptors

The driver has an option to pass in GPIO numbers from platform
data but this is not used in the kernel so delete this and the
whole platform data mechanism.

Get GPIO descriptors using the standard API and simplify the code,
gpiolib will handle any inversions.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: Switch to use dev_err_probe() helper

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER.

Reviewed-by: Sean Young <sean@mess.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

headers: Remove some left-over license text in include/uapi/linux/v4l2-*

Remove some left-over from commit e2be04c7f995 ("License cleanup: add SPDX
license identifier to uapi header files with a license")

When the SPDX-License-Identifier tag has been added, the corresponding
license text has not been removed.

Remove it now.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

headers: Remove some left-over license text in include/uapi/linux/dvb/

Remove some left-over from commit e2be04c7f995 ("License cleanup: add
SPDX license identifier to uapi header files with a license")

When the SPDX-License-Identifier tag has been added, the corresponding
license text has not been removed.

Remove it now.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: usb: pwc-uncompress: Use flex array destination for memcpy()

In preparation for FORTIFY_SOURCE performing run-time destination buffer
bounds checking for memcpy(), specify the destination output buffer
explicitly, instead of asking memcpy() to write past the end of what looked
like a fixed-size object.

Notice that raw_frame is a pointer to a structure that contains
flexible-array member rawframe[]:

drivers/media/usb/pwc/pwc.h:
190 struct pwc_raw_frame {
191         __le16 type;            /* type of the webcam */
192         __le16 vbandlength;     /* Size of 4 lines compressed (used by the
193                                    decompressor) */
194         __u8   cmd[4];          /* the four byte of the command (in case of
195                                    nala, only the first 3 bytes is filled) */
196         __u8   rawframe[];      /* frame_size = H / 4 * vbandlength */
197 } __packed;

Link: https://github.com/KSPP/linux/issues/200
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s5p-mfc: Fix to handle reference queue during finishing

On receiving last buffer driver puts MFC to MFCINST_FINISHING state which
in turn skips transferring of frame from SRC to REF queue. This causes
driver to stop MFC encoding and last frame is lost.

This patch guarantees safe handling of frames during MFCINST_FINISHING and
correct clearing of workbit to avoid early stopping of encoding.

Fixes: af9357467810 ("[media] MFC: Add MFC 5.1 V4L2 driver")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s5p-mfc: Clear workbit to handle error condition

During error on CLOSE_INSTANCE command, ctx_work_bits was not getting
cleared. During consequent mfc execution NULL pointer dereferencing of
this context led to kernel panic. This patch fixes this issue by making
sure to clear ctx_work_bits always.

Fixes: 818cd91ab8c6 ("[media] s5p-mfc: Extract open/close MFC instance commands")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s5p-mfc: Fix in register read and write for H264

Few of the H264 encoder registers written were not getting reflected
since the read values were not stored and getting overwritten.

Fixes: 6a9c6f681257 ("[media] s5p-mfc: Add variants to access mfc registers")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: imx: Use get_mbus_config instead of parsing upstream DT endpoints

Stop parsing upstream neighbors' device-tree endpoints to retrieve the
media bus configuration. Instead use the get_mbus_config op and throw an
error if the upstream subdevice does not implement it.

Also drop the corresponding TODO entry and the now unused
imx_media_get_pad_fwnode() function.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ths7303: Fix the include guard

Everything is about THS7303, so let the include guard reflect it as well
to avoid potential future conflict.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: c8sectpfe: Add of_node_put() when breaking out of loop

In configure_channels(), we should call of_node_put() when breaking
out of for_each_child_of_node() which will automatically increase
and decrease the refcount.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: Kconfig: Make DVB_CORE=m possible when MEDIA_SUPPORT=y

A case that CONFIG_MEDIA_SUPPORT is y but we need DVB_CORE=m, and
this doesn't work since DVB_CORE is default MEDIA_DIGITAL_TV_SUPPORT
and then follows MEDIA_SUPPORT.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>

media: i2c: isl7998x: make const array isl7998x_video_in_chan_map static

Don't populate the read-only array isl7998x_video_in_chan_map on the
stack but instead make it static. Also makes the object code a little
smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

drivers: staging: media: omap4iss: Use BIT macro instead of left shifting

There is a BIT(nr) macro available in Linux Kernel,
which does the same thing.

Example:  1 << 7  is same as BIT(7)

Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: v4l2-mediabus: add support for dual edge sampling

Some devices support sampling of the parallel data at both edges of the
interface pixel clock in order to reduce the pixel clock by two.
Add a mediabus flag that represents this feature.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

dt-bindings: media: video-interfaces: add support for dual edge sampling

Some devices support sampling of the parallel data at both edges of the
interface pixel clock in order to reduce the pixel clock by two.
Use the pclk-sample property to reflect this feature in the device tree.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: pt3: Use dma_set_mask_and_coherent() and simplify code

Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

Simplify code and remove some dead code accordingly.

[1]: https://lkml.org/lkml/2021/6/7/398

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ipu3-cio2: make the bridge depend on i2c

drivers/media/pci/intel/ipu3/cio2-bridge.c: In function ‘cio2_bridge_unregister_sensors’:
drivers/media/pci/intel/ipu3/cio2-bridge.c:258:17: error: implicit declaration of function ‘i2c_unregister_device’; did you mean ‘spi_unregister_device’? [-Werror=implicit-function-declaration]
  258 |                 i2c_unregister_device(sensor->vcm_i2c_client);
      |                 ^~~~~~~~~~~~~~~~~~~~~
      |                 spi_unregister_device

Link: https://lore.kernel.org/linux-media/S230142AbiJTWql/20221020224641Z+958@vger.kernel.org
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: MAINTAINERS: Add Hans de Goede as staging/atomisp maintainer

Add myself as maintainer for the drivers/staging/media/atomisp code.

Link: https://lore.kernel.org/linux-media/20221123161447.15834-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov9282: Add missing clk_disable_unprepare to error path

If ov9282_power_on failed the I2C write, it returned without releasing
clocks or regulators. Fix this.

Fixes: 6f7def3d8a65 ("media: i2c: ov9282: Add selection for CSI2 clock mode")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov9282: Make common_regs_list static

common_regs_list is only used within this file, so should
be static. Make it so.

Fixes: 7195aabf8f8b ("media: i2c: ov9282: Split registers into common and mode specific")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov9282: Fix missing documentation in structures

Fix missing documentation entries for members of structures,
as flagged by smatch.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov08d10: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx355: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx319: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx208: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov2680: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: report correct frame rate to user

In commit 3145efcdb4d0 ("media: ov5640: Rework timings programming"),
it defines max_fps field in ov5640_mode_info structure to store maximum
frame rate supported by each mode. But in ov5640_try_frame_interval(), it
assumes the maximum frame rate supported by all modes is 60. But actually,
only VGA support it. For others, the maximum frame rate supported is 30.
So correct it by taking the maximum frame rate supported by each mode as
the initialization value of the local variable maxfps.

Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov9282: Add ov9281 compatible

According to product brief they are identical from software point of view.
Differences are a different chief ray angle (CRA) and the package.
To distinguish ov9281 & ov9282 in userspace the name has to be explicitly
set. Provide a fixed string using platform data.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: Add compatible for ov9281

This is a slightly different hardware with identical software interface.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: set correct default link frequency

current_link_freq field in ov5640_dev structure is link frequency,
not link frequency array index, so correct it.

Fixes: 3c28588f35d3 ("media: ov5640: Update pixel_rate and link_freq")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rzg2l-cru: fix a test for timeout

The test for if the loop timed out is wrong and Smatch complains:

    drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:411 rzg2l_csi2_mipi_link_disable()
    warn: should this be 'timeout == -1'

Let's change it to a preop loop instead of a post op loop.

Fixes: 51e8415e39a9 ("media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rzg2l-cru: Fix missing error code in rzg2l_cru_start_streaming_vq()

Failed to allocate scratch buffer, add the error code '-ENOMEM' to the
return value 'ret'.

drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c:676 rzg2l_cru_start_streaming_vq() warn: missing error code 'ret'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3275
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: renesas: rzg2l-cru: Add missing documentation for image_conv_irq

Add missing documentation for image_conv_irq element in
struct rzg2l_cru_dev.

Documentation needed to avoid build warning with W=1 builds. It doesn't
really add any non obvious information but good to have it anyway.

Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvbdev: fix refcnt bug

Previous commit initialize the dvbdev->ref before the template copy,
which will overwrite the reference and cause refcnt bug.

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc6-next-20221128-syzkaller #0
...
RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
RSP: 0000:ffffc900000678d0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88813ff58000 RSI: ffffffff81660e7c RDI: fffff5200000cf0c
RBP: ffff888022a45010 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88823ffff000 CR3: 000000000c48e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_add include/linux/refcount.h:199 [inline]
 __refcount_inc include/linux/refcount.h:250 [inline]
 refcount_inc include/linux/refcount.h:267 [inline]
 kref_get include/linux/kref.h:45 [inline]
 dvb_device_get drivers/media/dvb-core/dvbdev.c:585 [inline]
 dvb_register_device+0xe83/0x16e0 drivers/media/dvb-core/dvbdev.c:517
...

Just place the kref_init at correct position.

Reported-by: syzbot+fce48a3dd3368645bd6c@syzkaller.appspotmail.com
Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sun6i-csi: clarify return value, fix uninited variable and add missing static

This fixes three smatch warnings:

drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_bridge.c:629:15: warning: 'enabled' may be used uninitialized [-Wmaybe-uninitialized]
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_bridge.c:439 sun6i_csi_bridge_s_stream() warn: missing error code 'ret'
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_bridge.c:682 sun6i_csi_bridge_notifier_bound() error: uninitialized symbol 'enabled'.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: tc358746: make DEFINE_RUNTIME_DEV_PM_OPS static

DEFINE_RUNTIME_DEV_PM_OPS should be static.

This fixes this sparse warning:

drivers/media/i2c/tc358746.c:1671:1: warning: symbol 'tc358746_pm_ops' was not declared. Should it be static?

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-frontends: drx39xyj: set missing error code

The rc return code was never set in hi_command().

This fixes this smatch warning:

drivers/media/dvb-frontends/drx39xyj/drxj.c:2351 hi_command() warn: missing error code 'rc'

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: media/frontend.h.rst.exceptions: add exceptions for new dvb defines

After some dvb/frontend.h additions, building the documentation
gives lots of warnings. Add the missing pieces to
frontend.h.rst.exceptions.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvbdev: fix build warning due to comments

Previous commit that introduces reference counter does not add proper
comments, which will lead to warning when building htmldocs. Fix them.

Reported-by: "Stephen Rothwell" <sfr@canb.auug.org.au>
Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: videobuf2: revert "get_userptr: buffers are always writable"

Commit 707947247e95 ("media: videobuf2-vmalloc: get_userptr: buffers are
always writable") caused problems in a corner case (passing read-only
shmem memory as a userptr). So revert this patch.

The original problem for which that commit was originally made is
something that I could not reproduce after reverting it. So just go
back to the way it was for many years, and if problems arise in
the future, then another approach should be taken to resolve it.

This patch is based on a patch from Hirokazu.

Fixes: 707947247e95 ("media: videobuf2-vmalloc: get_userptr: buffers are always writable")
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rzg2l-cru: Remove unnecessary shadowing of ret in rzg2l_csi2_s_stream()

Clang warns:

  drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:445:7: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
                  if (ret)
                      ^~~
  drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:475:9: note: uninitialized use occurs here
          return ret;
                ^~~
  drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:445:3: note: remove the 'if' if its condition is always false
                  if (ret)
                  ^~~~~~~~
  drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:441:7: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
                  if (ret)
                      ^~~
  drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:475:9: note: uninitialized use occurs here
          return ret;
                ^~~
  drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:441:3: note: remove the 'if' if its condition is always false
                  if (ret)
                  ^~~~~~~~
  drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:431:9: note: initialize the variable 'ret' to silence this warning
          int ret;
                ^
                  = 0
  2 errors generated.

ret is unnecessarily shadowed, meaning the assignments to ret within the
first 'if (enable)' block are only applied to the inner scope, not the
outer one as intended. Remove the shadowing to fix the warnings and make
everything work correctly.

Link: https://github.com/ClangBuiltLinux/linux/issues/1764
Fixes: 51e8415e39a9 ("media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb/frontend.h: fix kernel-doc warnings

scripts/kernel-doc spouts multiple warnings, so fix them:

include/uapi/linux/dvb/frontend.h:399: warning: Enum value 'QAM_1024' not described in enum 'fe_modulation'
include/uapi/linux/dvb/frontend.h:399: warning: Enum value 'QAM_4096' not described in enum 'fe_modulation'
frontend.h:286: warning: contents before sections
frontend.h:780: warning: missing initial short description on line:
 * enum atscmh_rs_code_mode

Fixes: 8220ead805b6 ("media: dvb/frontend.h: document the uAPI file")
Fixes: 6508a50fe84f ("media: dvb: add DVB-C2 and DVB-S2X parameter values")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: saa7164: fix missing pci_disable_device()

Add missing pci_disable_device() in the error path in saa7164_initdev().

Fixes: 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5693: Add support for a privacy-led GPIO

Add support for a privacy-led GPIO.

Making the privacy LED to controlable from userspace, as using the LED
class subsystem would do, would make it too easy for spy-ware to disable
the LED.

To avoid this have the sensor driver directly control the LED.

Link: https://lore.kernel.org/linux-media/20221129231149.697154-2-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-usb: m920x: make read-only arrays static const

Don't populate the arrays on the stack, instead make them static
const. Also makes the object code smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC

Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.

Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3-cio2: make the bridge depend on i2c

drivers/media/pci/intel/ipu3/cio2-bridge.c: In function ‘cio2_bridge_unregister_sensors’:
drivers/media/pci/intel/ipu3/cio2-bridge.c:258:17: error: implicit declaration of function ‘i2c_unregister_device’; did you mean ‘spi_unregister_device’? [-Werror=implicit-function-declaration]
  258 |                 i2c_unregister_device(sensor->vcm_i2c_client);
      |                 ^~~~~~~~~~~~~~~~~~~~~
      |                 spi_unregister_device

Link: https://lore.kernel.org/linux-media/S230142AbiJTWql/20221020224641Z+958@vger.kernel.org
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: MAINTAINERS: Add Hans de Goede as staging/atomisp maintainer

Add myself as maintainer for the drivers/staging/media/atomisp code.

Link: https://lore.kernel.org/linux-media/20221123161447.15834-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC

Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.

Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: s5p-mfc: Add new compatible string for Exynos3250 SoC

Since MFC v7 support was present for both Exynos5420 and Exynos3250
SoC with same compatible string "samsung,mfc-v7". As both SoCs
having different hardware properties and having same compatible
string for both SoCs doesn't seems to be correct.
Add new compatible for Exynos3250 SoC followed by mfc-v7 fallback
which will differentiate the node properties for both SoCs which
support MFC v7.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Core thread depends on core_list

Core thread will continue to work when core_list is not empty, not
depends on lat_list.

Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Setting lat buf to lat_list when lat decode error

Need to set lat buf to lat_list when lat decode error, or lat buffer will
be lost.

Fixes: 5d418351ca8f ("media: mediatek: vcodec: support stateless VP9 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Fix h264 set lat buffer error

Will set lat buffer to lat_list two times when lat decode timeout for
inner racing mode.

If core thread can't get frame buffer, need to return error value.

Fixes: 59fba9eed5a7 ("media: mediatek: vcodec: support stateless H.264 decoding for mt8192")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Can't set dst buffer to done when lat decode error

Core thread will call v4l2_m2m_buf_done to set dst buffer done for
lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to
free dst buffer when lat decode error, core thread will access kernel
NULL pointer dereference, then crash.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Fix getting NULL pointer for dst buffer

The driver may can't get v4l2 buffer when lat or core decode timeout,
will lead to crash when call v4l2_m2m_buf_done to set dst buffer
(NULL pointer) done.

Fixes: 7b182b8d9c85 ("media: mediatek: vcodec: Refactor get and put capture buffer flow")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: lock and check m2m_ctx in event handler

driver needs to cancel vpu before releasing the vpu instance,
so call v4l2_m2m_ctx_release() first,
to handle the redundant event triggered after m2m_ctx is released.

lock and check m2m_ctx in the event handler.

Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: cancel vpu before release instance

Revert "media: amphion: release m2m ctx when releasing vpu instance"
This reverts commit d91d7bc85062309aae6d8064563ddf17947cb6bc.

Call v4l2_m2m_ctx_release() to cancel vpu,
afterwards release the vpu instance.

Fixes: d91d7bc85062 ("media: amphion: release m2m ctx when releasing vpu instance")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: try to wakeup vpu core to avoid failure

firmware should be waked up by start or configure command,
but there is a very small chance that firmware failed to wakeup.
in such case, try to wakeup firmware again by sending a noop command

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: mediatek: vcodec: Add the platform compatible to schema

There are venc node warnings when running dtbs_check, the clock-names
was unexpected, missing properties '#address-cells' and '#size-cells'.
Add the corresponding platform compatible to schema.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Add dependency on ARCH_ASPEED

The VIDEO_ASPEED is part of the Aspeed silicon so it makes
sense to depend on ARCH_ASPEED and for compile testing.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vivid.rst: fix TV and S-Video Inputs section

remove the double word 'in'.

Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sun8i-a83t-mipi-csi2: Register async subdev with no sensor attached

This allows the device to probe and register its async subdev without
a sensor attached.

The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.

Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sun6i-mipi-csi2: Register async subdev with no sensor attached

This allows the device to probe and register its async subdev without
a sensor attached.

The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.

Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sun8i-a83t-mipi-csi2: Require both pads to be connected for streaming

The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.

Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sun6i-mipi-csi2: Require both pads to be connected for streaming

The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.

Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: encoder add support for contiguous planes

encoder add support for contiguous formats NV12

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: decoder add support for contiguous planes

decoder add support for contiguous formats
V4L2_PIX_FMT_NV12_8L128 and V4L2_PIX_FMT_NV12_10BE_8L128

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: tell and handle contiguous and non contiguous format

Driver should tell the number of memory planes and component planes.
the amphion vpu support non contiguous planes,
but for compatibility with other device
that only support contiguous planes.
driver can add support for contiguous planes in the same time.
Then the mem_planes can be different from the comp_planes.
driver need to handle buffer according mem_planes and comp_planes.

So driver can support NV12 and NV12M.

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: add nv12_8l128 and nv12_10be_8l128 video format.

add contiguous nv12 tiled format nv12_8l128 and nv12_10be_8l128

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l: Use memset_after() helper

The CLEAR_AFTER_FIELD defined here is functionally the same as
memset_after() helper, so replace it with memset_after() to simplify the
code, no functional change in this patch.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rcar-vin: Add support for Gen3 UDS (Up Down Scaler)

Add support for the UDS (Up Down Scaler) found in some Gen3 SoCs.

Not all Gen3 SoCs have scalers, and for those that do it's only
available to the master node of each VIN group. The setup for which SoCs
and nodes have access to a scaler are dealt with at probe time and then
function transparently reusing the schema from the already present Gen2
scaler.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rcar-vin: Store scaler in a function pointer

The scaler implementation is different between the VIN generations, and
not all SoCs have a scaler. Currently only Gen2 scalers are supported.

Prepare to add support for more scalers by storing the setup in a
function pointer initialized at probe time. While at it move call site
to after, instead of before, the generic capture setup, this have no
effect on the Gen2 scaler but will be leveraged by the Gen3 scaler.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rcar-vin: Do not cache remote rectangle

Prepare for scaling support in the media controller part of the driver
by not caching the remote rectangle. Mimic the omap3isp and look it up
each time it's needed.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()

Wei Chen reports a kernel bug as blew:

general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded

In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.

Fix this by checking msg[i].len in az6027_i2c_xfer().

Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-core: Fix ignored return value in dvb_register_frontend()

In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.

It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.

BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
 <TASK>
 ...
 dvb_remove_device+0x18b/0x1f0 [dvb_core]
 dvb_unregister_frontend+0x7b/0x130 [dvb_core]
 vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
 ...

Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.

Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-usb: dib0700_devices: Remove unused struct dibx090p_adc

After commit 5e9c85d98337("[media] dib8096: enhancement"), no one use struct
dibx090p_adc, so remove it.

Link: https://lore.kernel.org/linux-media/20220927133827.99097-1-yuancan@huawei.com
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dib0700: remove orphan dvb_usb_dib0700_ir_proto declaration

The dvb_usb_dib0700_ir_proto has been removed by
commit 0ffd1ab34a00 ("V4L/DVB: dib0700: properly implement IR
change_protocol"), so remove the orphan declaration.

Link: https://lore.kernel.org/linux-media/20220920015902.785337-1-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-usb: fix memory leak in dvb_usb_adapter_init()

Syzbot reports a memory leak in "dvb_usb_adapter_init()".
The leak is due to not accounting for and freeing current iteration's
adapter->priv in case of an error. Currently if an error occurs,
it will exit before incrementing "num_adapters_initalized",
which is used as a reference counter to free all adap->priv
in "dvb_usb_adapter_exit()". There are multiple error paths that
can exit from before incrementing the counter. Including the
error handling paths for "dvb_usb_adapter_stream_init()",
"dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()"
within "dvb_usb_adapter_init()".

This means that in case of an error in any of these functions the
current iteration is not accounted for and the current iteration's
adap->priv is not freed.

Fix this by freeing the current iteration's adap->priv in the
"stream_init_err:" label in the error path. The rest of the
(accounted for) adap->priv objects are freed in dvb_usb_adapter_exit()
as expected using the num_adapters_initalized variable.

Syzbot report:

BUG: memory leak
unreferenced object 0xffff8881172f1a00 (size 512):
  comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
backtrace:
    [<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline]
    [<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
    [<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
    [<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883
    [<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
    [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
    [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
    [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
    [<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782
    [<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899
    [<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970
    [<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405
    [<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170
    [<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
    [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
    [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
    [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752

Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be
Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>