Merge tag 'pull-riscv-to-apply-20220422-1' of github.com:alistair23/qemu into staging

First RISC-V PR for QEMU 7.1

 * Add support for Ibex SPI to OpenTitan
 * Add support for privileged spec version 1.12.0
 * Use privileged spec version 1.12.0 for virt machine by default
 * Allow software access to MIP SEIP
 * Add initial support for the Sdtrig extension
 * Optimisations for vector extensions
 * Improvements to the misa ISA string
 * Add isa extenstion strings to the device tree
 * Don't allow `-bios` options with KVM machines
 * Fix NAPOT range computation overflow
 * Fix DT property mmu-type when CPU mmu option is disabled
 * Make RISC-V ACLINT mtime MMIO register writable
 * Add and enable native debug feature
 * Support 64bit fdt address.

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmJh+GQACgkQIeENKd+X
# cFTKZQf/UQ8yb5DozdeNbm2pmfjJnEEsnXB6k95wIX9pjrJ3HkypHzoRpLbIDzET
# KsPjRW6N5SLPINrYfgBuxUv0A/6jOG7cTC/Bimu16wPyS2zQopiTTgiJv6qLkO5G
# QUBWz/6kaXNT+fQiTnXXqjViADO49FigYRWUmRfNabeUwb6YoQwoBY6B5jpwZlbI
# B9qDdcKnYet5zwi1rGFedRC1XtP7ZDF1lylqNS2nnfr1ZvOWYkAJb5TJDi/4qUpz
# i/wGRx/8KaYD5ehGe7Xd50sMM9lLlzNgOnZL0F5cRnA8e/3nRFjTeQ7RoSKGBdaS
# 7J4RqA9YMhuPL2tTq95wof6EpVsSNw==
# =yLIg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 05:35:48 PM PDT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20220422-1' of github.com:alistair23/qemu: (31 commits)
  hw/riscv: boot: Support 64bit fdt address.
  hw/core: tcg-cpu-ops.h: Update comments of debug_check_watchpoint()
  target/riscv: cpu: Enable native debug feature
  target/riscv: machine: Add debug state description
  target/riscv: csr: Hook debug CSR read/write
  target/riscv: cpu: Add a config option for native debug
  target/riscv: debug: Implement debug related TCGCPUOps
  hw/intc: riscv_aclint: Add reset function of ACLINT devices
  hw/intc: Make RISC-V ACLINT mtime MMIO register writable
  hw/intc: Support 32/64-bit mtimecmp and mtime accesses in RISC-V ACLINT
  hw/intc: Add .impl.[min|max]_access_size declaration in RISC-V ACLINT
  hw/riscv: virt: fix DT property mmu-type when CPU mmu option is disabled
  target/riscv/pmp: fix NAPOT range computation overflow
  hw/riscv: virt: Exit if the user provided -bios in combination with KVM
  target/riscv: Use cpu_loop_exit_restore directly from mmu faults
  target/riscv: fix start byte for vmv<nf>r.v when vstart != 0
  target/riscv: Add isa extenstion strings to the device tree
  target/riscv: misa to ISA string conversion fix
  target/riscv: optimize helper for vmv<nr>r.v
  target/riscv: optimize condition assign for scale < 0
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-migration-20220421a' of https://gitlab.com/dagrh/qemu into staging

V2: Migration pull 2022-04-21

  Dan: Test fixes and improvements (TLS mostly)
  Peter: Postcopy improvements
  Me: Race fix for info migrate, and compilation fix

V2:
  Fixed checkpatch nit of unneeded NULL check

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmJhpLIACgkQBRYzHrxb
# /edCPQ//dITFWStcsvon8gBBRWY/ekz/EdmWd2KFUp1r/yzopXExW5Gy+MzzTEwk
# axf7s991eyjta1gU0IYCzWcuR36LE8YsZRgDlOhttZ/674ZnX5ZIJBggwDKE/bYE
# IEHd8qsHy6oV8UIFvBQ6wvIDJmH+8gOwnPUzOO9Ek2UkSgBGsptZ8d6Hi0hTzYFB
# omhgc2eO3XQUlxM+8MwlrZU84QkxnBn2g7nVgDQyRokAou46Yf8FD/bWv3CKAdO+
# Ph+4XjBiddBFYUtf4XWSTvVfi23kij1k/4bjH3zaocE86gQ6CUteImFtowwr6N95
# sJl1EXBOtz0BP5xONqkywpWi1Qqg+mecF4KrS4XAHszaUkaj3sTFOyItwlTzZErF
# /2dZRsPRs9fTcjjzpOe/CKoGr+CcyZdxY1qbCNfHaJagdxytN2qxOaneTUbKYUE5
# n4Om9zxDS2esZCnkx26e2wylJ1wzKZBbjsoKYQA4IGaQ6Qz8Zciea0tApwhgyVjs
# KHcYtvScPLxmEEKgzDap6B7fJxyaOg3KNX+0XzLLpLS1oaeqwvSIQM/QMMrnwGxs
# uA1LI2uqlQBitaJOhgLMnNH4ze27HC3DM4OWAE+iOhpD+LNAWstjWraNNXbG4sSj
# 55ndJHJxOCjPlFY4dB/ytUbUo7XBkztCR4c1+I+lSUbMTq3KuUg=
# =M5sx
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 11:38:42 AM PDT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]

* tag 'pull-migration-20220421a' of https://gitlab.com/dagrh/qemu:
  migration: Read state once
  migration: Fix operator type
  migration: Allow migrate-recover to run multiple times
  migration: Move channel setup out of postcopy_try_recover()
  migration: Export ram_load_postcopy()
  migration: Move migrate_allow_multifd and helpers into migration.c
  migration: Add pss.postcopy_requested status
  migration: Drop multifd tls_hostname cache
  migration: Postpone releasing MigrationState.hostname
  tests: expand the migration precopy helper to support failures
  tests: switch migration FD passing test to use common precopy helper
  tests: introduce ability to provide hooks for migration precopy test
  tests: merge code for UNIX and TCP migration pre-copy tests
  tests: switch MigrateStart struct to be stack allocated
  migration: fix use of TLS PSK credentials with a UNIX socket
  tests: print newline after QMP response in qtest logs
  tests: support QTEST_TRACE env variable
  tests: improve error message when saving TLS PSK file fails

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/riscv: boot: Support 64bit fdt address.

The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB,
but not all platforms have dram_base within 3GB.

This patch adds an exception for dram base not within 3GB,
which will place fdt at dram_end align 16MB.

riscv_setup_rom_reset_vec() also needs to be modified

Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220419115945.37945-1-dylan@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/core: tcg-cpu-ops.h: Update comments of debug_check_watchpoint()

This is now used by RISC-V as well. Update the comments.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-7-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: cpu: Enable native debug feature

Turn on native debug feature by default for all CPUs.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-6-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: machine: Add debug state description

Add a subsection to machine.c to migrate debug CSR state.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-5-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: csr: Hook debug CSR read/write

This adds debug CSR read/write support to the RISC-V CSR RW table.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-4-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: cpu: Add a config option for native debug

Add a config option to enable support for native M-mode debug.
This is disabled by default and can be enabled with 'debug=true'.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-3-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: debug: Implement debug related TCGCPUOps

Implement .debug_excp_handler, .debug_check_{breakpoint, watchpoint}
TCGCPUOps and hook them into riscv_tcg_ops.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: riscv_aclint: Add reset function of ACLINT devices

This commit implements reset function of all ACLINT devices.
ACLINT device reset will clear MTIME and MSIP register to 0.

Depend on RISC-V ACLINT spec v1.0-rc4:
https://github.com/riscv/riscv-aclint/blob/v1.0-rc4/riscv-aclint.adoc

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220420080901.14655-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: Make RISC-V ACLINT mtime MMIO register writable

RISC-V privilege spec defines that mtime is exposed as a memory-mapped
machine-mode read-write register. However, as QEMU uses host monotonic
timer as timer source, this makes mtime to be read-only in RISC-V
ACLINT.

This patch makes mtime to be writable by recording the time delta value
between the mtime value to be written and the timer value at the time
mtime is written. Time delta value is then added back whenever the timer
value is retrieved.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220420080901.14655-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: Support 32/64-bit mtimecmp and mtime accesses in RISC-V ACLINT

RISC-V privilege spec defines that:

* In RV32, memory-mapped writes to mtimecmp modify only one 32-bit part
  of the register.
* For RV64, naturally aligned 64-bit memory accesses to the mtime and
  mtimecmp registers are additionally supported and are atomic.

It's possible to perform both 32/64-bit read/write accesses to both
mtimecmp and mtime registers.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Message-Id: <20220420080901.14655-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: Add .impl.[min|max]_access_size declaration in RISC-V ACLINT

If device's MemoryRegion doesn't have .impl.[min|max]_access_size
declaration, the default access_size_min would be 1 byte and
access_size_max would be 4 bytes (see: softmmu/memory.c).
This will cause a 64-bit memory access to ACLINT to be splitted into
two 32-bit memory accesses.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Message-Id: <20220420080901.14655-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: virt: fix DT property mmu-type when CPU mmu option is disabled

The device tree property "mmu-type" is currently exported as either
"riscv,sv32" or "riscv,sv48".

However, the riscv cpu device tree binding [1] has a specific value
"riscv,none" for a HART without a MMU.

Set the device tree property "mmu-type" to "riscv,none" when the CPU mmu
option is disabled using rv32,mmu=off or rv64,mmu=off.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/cpus.yaml?h=v5.17

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220414155510.1364147-1-niklas.cassel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv/pmp: fix NAPOT range computation overflow

There is an overflow with the current code where a pmpaddr value of
0x1fffffff is decoded as sa=0 and ea=0 whereas it should be sa=0 and
ea=0xffffffff.

Fix that by simplifying the computation. There is in fact no need for
ctz64() nor special case for -1 to achieve proper results.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <rq81o86n-17ps-92no-p65o-79o88476266@syhkavp.arg>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: virt: Exit if the user provided -bios in combination with KVM

The -bios option is silently ignored if used in combination with -enable-kvm.
The reason is that the machine starts in S-Mode, and the bios typically runs in
M-Mode.

Better exit in that case to not confuse the user.

Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-Id: <20220401121842.2791796-1-ralf.ramsauer@oth-regensburg.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use cpu_loop_exit_restore directly from mmu faults

The riscv_raise_exception function stores its argument into
exception_index and then exits to the main loop.  When we
have already set exception_index, we can just exit directly.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220401125948.79292-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix start byte for vmv<nf>r.v when vstart != 0

The spec for vmv<nf>r.v says: 'the instructions operate as if EEW=SEW,
EMUL = NREG, effective length evl= EMUL * VLEN/SEW.'

So the start byte for vstart != 0 should take sew into account

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220330021316.18223-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add isa extenstion strings to the device tree

The Linux kernel parses the ISA extensions from "riscv,isa" DT
property. It used to parse only the single letter base extensions
until now. A generic ISA extension parsing framework was proposed[1]
recently that can parse multi-letter ISA extensions as well.

Generate the extended ISA string by appending the available ISA extensions
to the "riscv,isa" string if it is enabled so that kernel can process it.

[1] https://lkml.org/lkml/2022/2/15/263

Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Suggested-by: Heiko Stubner <heiko@sntech.de>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220329195657.1725425-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: misa to ISA string conversion fix

Some bits in RISC-V `misa' CSR should not be reflected in the ISA
string.  For instance, `S' and `U' (represents existence of supervisor
and user mode, respectively) in `misa' CSR must not be copied since
neither `S' nor `U' are valid single-letter extensions.

This commit also removes all reserved/dropped single-letter "extensions"
from the list.

-   "B": Not going to be a single-letter extension (misa.B is reserved).
-   "J": Not going to be a single-letter extension (misa.J is reserved).
-   "K": Not going to be a single-letter extension (misa.K is reserved).
-   "L": Dropped.
-   "N": Dropped.
-   "T": Dropped.

It also clarifies that the variable `riscv_single_letter_exts' is a
single-letter extension order list.

Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <4a4c11213a161a7eedabe46abe58b351bb0e2ef2.1648473008.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: optimize helper for vmv<nr>r.v

LEN is not used for GEN_VEXT_VMV_WHOLE macro, so vmv<nr>r.v can share
the same helper

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220325085902.29500-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: optimize condition assign for scale < 0

for some cases, scale is always equal or less than 0, since lmul is not larger than 3

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220325085902.29500-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add initial support for the Sdtrig extension

This adds initial support for the Sdtrig extension via the Trigger
Module, as defined in the RISC-V Debug Specification [1].

Only "Address / Data Match" trigger (type 2) is implemented as of now,
which is mainly used for hardware breakpoint and watchpoint. The number
of type 2 triggers implemented is 2, which is the number that we can
find in the SiFive U54/U74 cores.

[1] https://github.com/riscv/riscv-debug-spec/raw/master/riscv-debug-stable.pdf

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220315065529.62198-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Allow software access to MIP SEIP

The RISC-V specification states that:
  "Supervisor-level external interrupts are made pending based on the
  logical-OR of the software-writable SEIP bit and the signal from the
  external interrupt controller."

We currently only allow either the interrupt controller or software to
set the bit, which is incorrect.

This patch removes the miclaim mask when writing MIP to allow M-mode
software to inject interrupts, even with an interrupt controller.

We then also need to keep track of which source is setting MIP_SEIP. The
final value is a OR of both, so we add two bools and use that to keep
track of the current state. This way either source can change without
losing the correct value.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/904
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220317061817.3856850-3-alistair.francis@opensource.wdc.com>

target/riscv: cpu: Fixup indentation

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220317061817.3856850-2-alistair.francis@opensource.wdc.com>

target/riscv: Enable privileged spec version 1.12

Virt machine uses privileged specification version 1.12 now.
All other machine continue to use the default one defined for that
machine unless changed to 1.12 by the user explicitly.

This commit enforces the privilege version for csrs introduced in
v1.12 or after.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-7-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add *envcfg* CSRs support

The RISC-V privileged specification v1.12 defines few execution
environment configuration CSRs that can be used enable/disable
extensions per privilege levels.

Add the basic support for these CSRs.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add support for mconfigptr

RISC-V privileged specification v1.12 introduced a mconfigptr
which will hold the physical address of a configuration data
structure. As Qemu doesn't have a configuration data structure,
is read as zero which is valid as per the priv spec.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Introduce privilege version field in the CSR ops.

To allow/disallow the CSR access based on the privilege spec, a new field
in the csr_ops is introduced. It also adds the privileged specification
version (v1.12) for the CSRs introduced in the v1.12. This includes the
new ratified extensions such as Vector, Hypervisor and secconfig CSR.
However, it doesn't enforce the privilege version in this commit.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add the privileged spec version 1.12.0

Add the definition for ratified privileged specification version v1.12

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Define simpler privileged spec version numbering

Currently, the privileged specification version are defined in
a complex manner for no benefit.

Simplify it by changing it to a simple enum based on.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv: opentitan: Connect opentitan SPI Host

Connect spi host[1/0] to opentitan.

Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303045426.511588-2-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/ssi: Add Ibex SPI device model

Adds the SPI_HOST device model for ibex. The device specification is as per
[1]. The model has been tested on opentitan with spi_host unit tests
written for TockOS.

[1] https://docs.opentitan.org/hw/ip/spi_host/doc/

Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303045426.511588-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge tag 'pull-rx-20220421' of https://gitlab.com/rth7680/qemu into staging

Fix usp/isp swapping upon clrpsw/setpsw.
Fix psw.i/pc upon wait.
Align dtb in ram.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJhlJYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/ipQf+JLeXW1HaD5iNnyUl
# Uh0CLvwwkXvuiDAlaoGCKl2mcVJR/2d/ScTPTGx44VEwmLpV2mgF8/VUWoRtao/C
# Kal5DsaOAC2pUKkYbnorsCpq4ty2QMPYXZXOKULPcfLa3tbsr9bE6JkCQ6gZeAAk
# ITuB+dfdBTpW2lc0eoQ7cDMcQkD1cxyfNVwZ7rP2i9N6tjTW1488kxsBthhQIr0t
# sNrrBIiK7nhdgXNfhWDPP/6f8osZwhLGO8G9tyOTtkPOF6o6Dy27B0Bmlf5T6OY+
# SeTwC2O197gd0YkPWvZgMQbJWnX0kHgHwlFEBaMSxMXAcrlccNZQMyBN4cYoC+ie
# e3vyWA==
# =lj1s
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 10:29:58 AM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-rx-20220421' of https://gitlab.com/rth7680/qemu:
  target/rx: update PC correctly in wait instruction
  target/rx: set PSW.I when executing wait instruction
  hw/rx: rx-gdbsim DTB load address aligned of 16byte.
  target/rx: Swap stack pointers on clrpsw/setpsw instruction
  target/rx: Move DISAS_UPDATE check for write to PSW
  target/rx: Store PSW.U in tb->flags
  target/rx: Put tb_flags into DisasContext

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'python-pull-request' of https://gitlab.com/jsnow/qemu into staging

Python patches

This PR finalizes the switch from Luiz's QMP library to mine.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAmJhdSEACgkQfe+BBqr8
# OQ43phAAkrqVMU/IJzKKMIYoZtO67gk2u2AG+FNbrQr0FuisnnMSZzvDgnlxQHii
# ingLiIFEUNIfj5QxOiD/glbh/QI6GHY5mh/FYdStc4YALb2MqXYPQhW3UCGxDPlF
# YqJzWk2WbZ20drxCgRzHN/pI5SQY6N+Ev9jyzP/cvCNIFY7xxe0IhApiNjjZt9e2
# ngZ3pX+xjX94YezTQQ1E6lDUSXDUQ4VZWl/VH8nbEeUbOWLfR238/WOqWkv1SHWM
# TtOBeYOLUDjFzplMr4Xbnd9DP/Q3/V8KKT9VHNHcF8eAkOohvxeYJx8AuuohZB4C
# qPQj+gaD0cV63qZNNRyetqtCTG6bd+GDt/s3GhUBxsufz+Y3MTMn/3zHlheiaOwO
# ZIXiEkdgKxPTx5T6Vo0BJoE4/22VhzBRQuTg/i0bWrzgKAyPDOf8uQnm5vvGV8/H
# f7KtXWPoqNVc2wWOh5vJAlsnKFDVW6d+jBbk5jRGofDKvVU31uLLu4eBBHpPgaAs
# 9fWd7NgEgqL6ZGYsVSyuwmkhKCLjBtd8K/BGQrpicQUH3J80jagSVnmmmt93KaE3
# HXdZfnE3vxcG45LGdjcu88CHOzUqTEflf6gCGg/ISaP3AlPKPZs2Ck7RPHLK1UeG
# 084wYmyuq5C/zXIriBhw75ZGoaJHOdgY31OyMdL1D/Ii+p0h3w0=
# =m2An
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 08:15:45 AM PDT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* tag 'python-pull-request' of https://gitlab.com/jsnow/qemu:
  python/qmp: remove pylint workaround from legacy.py
  python: rename 'aqmp-tui' to 'qmp-tui'
  python: rename qemu.aqmp to qemu.qmp
  python: re-enable pylint duplicate-code warnings
  python: remove the old QMP package
  python/aqmp: copy qmp docstrings to qemu.aqmp.legacy
  python/aqmp: fully separate from qmp.QEMUMonitorProtocol
  python/aqmp: take QMPBadPortError and parse_address from qemu.qmp
  python: temporarily silence pylint duplicate-code warnings
  python/aqmp-tui: relicense as LGPLv2+
  python/qmp-shell: relicense as LGPLv2+
  python/aqmp: relicense as LGPLv2+
  python/aqmp: add explicit GPLv2 license to legacy.py
  iotests: switch to AQMP
  iotests/mirror-top-perms: switch to AQMP
  scripts/bench-block-job: switch to AQMP
  python/machine: permanently switch to AQMP

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

migration: Read state once

The 'status' field for the migration is updated normally using
an atomic operation from the migration thread.
Most readers of it aren't that careful, and in most cases it doesn't
matter.

In query_migrate->fill_source_migration_info the 'state'
is read twice; the first time to decide which state fields to fill in,
and then secondly to copy the state to the status field; that can end up
with a status that's inconsistent; e.g. setting up the fields
for 'setup' and then having an 'active' status.  In that case
libvirt gets upset by the lack of ram info.
The symptom is:
   libvirt.libvirtError: internal error: migration was active, but no RAM info was set

Read the state exactly once in fill_source_migration_info.

This is a possible fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=2074205

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220413113329.103696-1-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Fix operator type

Clang spotted an & that should have been an &&; fix it.

Reported by: David Binderman / https://gitlab.com/dcb
Fixes: 65dacaa04fa ("migration: introduce save_normal_page()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/963
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220406102515.96320-1-dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Allow migrate-recover to run multiple times

Previously migration didn't have an easy way to cleanup the listening
transport, migrate recovery only allows to execute once.  That's done with a
trick flag in postcopy_recover_triggered.

Now the facility is already there.

Drop postcopy_recover_triggered and instead allows a new migrate-recover to
release the previous listener transport.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-8-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Move channel setup out of postcopy_try_recover()

We used to use postcopy_try_recover() to replace migration_incoming_setup() to
setup incoming channels.  That's fine for the old world, but in the new world
there can be more than one channels that need setup.  Better move the channel
setup out of it so that postcopy_try_recover() only handles the last phase of
switching to the recovery phase.

To do that in migration_fd_process_incoming(), move the postcopy_try_recover()
call to be after migration_incoming_setup(), which will setup the channels.
While in migration_ioc_process_incoming(), postpone the recover() routine right
before we'll jump into migration_incoming_process().

A side benefit is we don't need to pass in QEMUFile* to postcopy_try_recover()
anymore.  Remove it.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-7-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Export ram_load_postcopy()

Will be reused in postcopy fast load thread.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-6-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Move migrate_allow_multifd and helpers into migration.c

This variable, along with its helpers, is used to detect whether multiple
channel will be supported for migration.  In follow up patches, there'll be
other capability that requires multi-channels.  Hence move it outside multifd
specific code and make it public.  Meanwhile rename it from "multifd" to
"multi_channels" to show its real meaning.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-5-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Add pss.postcopy_requested status

This boolean flag shows whether the current page during migration is triggered
by postcopy or not.  Then in ram_save_host_page() and deeper stack we'll be
able to have a reference on the priority of this page.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-4-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Drop multifd tls_hostname cache

The hostname is cached N times, N equals to the multifd channels.

Drop that cache because after previous patch we've got s->hostname
being alive for the whole lifecycle of migration procedure.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Postpone releasing MigrationState.hostname

We used to release it right after migrate_fd_connect().  That's not good
enough when there're more than one socket pair required, because it'll be
needed to establish TLS connection for the rest channels.

One example is multifd, where we copied over the hostname for each channel
but that's actually not needed.

Keeping the hostname until the cleanup phase of migration.

Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-2-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: Fixup checkpatch error; don't need to check for NULL
  around g_free

tests: expand the migration precopy helper to support failures

The migration precopy testing helper function always expects the
migration to run to a completion state. There will be test scenarios
for TLS where expect either the client or server to fail the migration.
This expands the helper to cope with these scenarios.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-12-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: switch migration FD passing test to use common precopy helper

The combination of the start and finish hooks allow the FD passing
code to use the precopy helper

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-11-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: introduce ability to provide hooks for migration precopy test

There are alot of different scenarios to test with migration due to the
wide number of parameters and capabilities available. To enable sharing
of the basic precopy test scenario, we need to be able to set arbitrary
parameters and capabilities before the migration is initiated, but don't
want to have all this logic in the common helper function. Solve this
by defining two hooks that can be provided by the test case, one before
migration starts and one after migration finishes.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-10-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: merge code for UNIX and TCP migration pre-copy tests

The test cases differ only in the URI they provide to the migration
commands, and the ability to set the dirty_ring mode. This code is
trivially merged into a common helper.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-9-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: switch MigrateStart struct to be stack allocated

There's no compelling reason why the MigrateStart struct needs to be
heap allocated. Using stack allocation and static initializers is
simpler.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-8-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: fix use of TLS PSK credentials with a UNIX socket

The migration TLS code has a check mandating that a hostname be
available when starting a TLS session. This is expected when using
x509 credentials, but is bogus for PSK and anonymous credentials
as neither involve hostname validation.

The TLS crdentials object gained suitable error reporting in the
case of TLS with x509 credentials, so there is no longer any need
for the migration code to do its own (incorrect) validation.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-7-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: print newline after QMP response in qtest logs

The QMP commands have a trailing newline, but the response does not.
This makes the qtest logs hard to follow as the next QMP command
appears in the same line as the previous QMP response.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: support QTEST_TRACE env variable

When debugging failing qtests it is useful to be able to turn on trace
output to stderr. The QTEST_TRACE env variable contents get injected
as a '-trace <str>' command line arg

Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: improve error message when saving TLS PSK file fails

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-3-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Merge tag 'pull-qapi-2022-04-21' of git://repo.or.cz/qemu/armbru into staging

QAPI patches patches for 2022-04-21

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmJhZgISHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTuZQP/iesk/r4ytyk+q+ksNCQHTZl4B4uZcbI
# TgbA1dwbwkKOfNaqByKZzXvbymL9Y4RpZavZ0i1qa3hK5orKHThLK4omRaFD+SPp
# sH53TeTgkG/UNUQk00dim1BzuWJefqFo1rYSqvTzaXVPyx1Q9Gk9193q5zDTlMJs
# w6UKD+q+Yxne9aoi1IH2NzzEKElHz7MMFeBDsnxDbkedzBxY1Ka05IOI2ucXhJ7X
# mYTZxHsrjncW4qJNkf57u9y4faNDIBeT3vkFqBaIeTXSSqm+xO1rkLanGOLQKtIM
# zD6JDMcqsIkZttEy0QCOrjKvMueWaOTZsS0sbdCC+JpBAbyVeS83kmRyYwEhyGre
# FJzf81zcEH6FtnDYudWWUT7hKV6sHWbw+4ho5WTkCYnr/Cfqr3TyDbSW+f/eIxUK
# vaujP/8MTypS4p0mx4QfM2/eO05oZHwEaslOn0gkg7siAJWuC7KUkkWSwz6ZNZCp
# qj/+jtDRGhvB4bGFusciqwtbnLNtVPX2meUuVxK74lmKa00+zXraNFfvGIxfzzC0
# pJ6weJj2jMLo5OEsZ2xWfNqhDigFQYxbGR8X3N2hg5GZTx1k5WXx7mRz3GlAwd8Q
# /4hcTBXKTFxDNxXqzL2eHBtaruKHjnHoVo2eAodyF+9FqErInjr/wisVm6I+R8NR
# Z94UBs8lvMIC
# =a3AD
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 07:11:14 AM PDT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-qapi-2022-04-21' of git://repo.or.cz/qemu/armbru:
  qapi: Fix version of cpu0-id field
  qapi: Fix typo
  qapi: Fix documentation for query-xen-replication-status
  docs: qapi: Remove outdated reference to simple unions
  qapi-schema: test: add a unit test for parsing array alternates
  qapi-schema: test: add a qapi-schema-test for array alternates
  qapi-schema: support alternates with array type

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: update PC correctly in wait instruction

`cpu_pc` at this point does not necessary point to the current
instruction (i.e., the wait instruction being translated), so it's
incorrect to calculate the new value of `cpu_pc` based on this. It must
be updated with `ctx->base.pc_next`, which contains the correct address
of the next instruction.

This change fixes the wait instruction skipping the subsequent branch
when used in an idle loop like this:

    0:  wait
        bra.b 0b
        brk   // should be unreachable

Signed-off-by: Tomoaki Kawada <i@yvt.jp>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417060224.2131788-1-i@yvt.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: set PSW.I when executing wait instruction

This patch fixes the implementation of the wait instruction to
implicitly update PSW.I as required by the ISA specification.

Signed-off-by: Tomoaki Kawada <i@yvt.jp>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417045937.2128699-1-i@yvt.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/rx: rx-gdbsim DTB load address aligned of 16byte.

Linux kernel required alined address of DTB.
But missing align in dtb load function.
Fixed to load to the correct address.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207132758.84403-1-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Swap stack pointers on clrpsw/setpsw instruction

We properly perform this swap in helper_set_psw for MVTC,
but we missed doing so for the CLRPSW/SETPSW of the U bit.

Reported-by: Tomoaki Kawada <i@yvt.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20220417165130.695085-5-richard.henderson@linaro.org>

target/rx: Move DISAS_UPDATE check for write to PSW

Have one check in move_to_cr instead of one in each
function that calls move_to_cr.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20220417165130.695085-4-richard.henderson@linaro.org>

target/rx: Store PSW.U in tb->flags

With this, we don't need movcond to determine
which stack pointer is current.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20220417165130.695085-3-richard.henderson@linaro.org>

target/rx: Put tb_flags into DisasContext

Copy tb->flags into ctx->tb_flags; we'll want to modify
this value throughout the tb in future.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20220417165130.695085-2-richard.henderson@linaro.org>

Merge tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu into staging

Misc cleanups

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmJhYIscHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5W0jD/43n8PL2cv42lq6OaIS
# OYN9vfW9xgA9THZiUH4xEHYreZh+KofmY1PbJn1n7q+v6DecBiqM4fZr1LY8X3PM
# xRUH0l4gjXwYwX2cSSo5UTZ/PF248Uoo3tUE3vgMFkYghHMjKcTtaSkYEPGHf2nR
# t3m1qLG9w9YPhVg7PNCntjUKi+w2TtcrRVzP7V7XyFc1HrAoT0ys6KaBBrXMbcjz
# SxTRbcwSq+6aPjQIn0RWp8Hp1HkdNjegB98dkyqRLlVaugHZWPYDXDQTgVziQlX8
# dU8YrlvTOtDWwsNP6awWnW6/IjKuJjGR0wT3QKwi8JAZ0YV3egwEKoQRUAyHtnn2
# FkSMYgmJcF0ai1aIJFAx+3PIzCfS49lKXA0t303DtY3hRR9JKGMwaV2do9Wm2irt
# o7T1lKKN7R7R8Q3U4OsatYMYm7KYL07NEDiQCPloGvCo27ezkAWCKXAw1mRUkxKF
# jKwJPcnOUq21Jp6tpjsR8ifSw70jBSEWQSGqhXnDhZhx2C2/Qqkg2I8DagLiPger
# kYxbQ13LTG0R25YHa1r3UmzuD+HpZOM8XoLJc5yun/1UrwyR9ghHrOoxkSnRT2Ks
# QFn//xQ2SzUnGBNzNSMfTk8vzludxSWfFnOjkviF6E2Elnw3p8f/kOQRAft5dMBY
# ftgoy2yLone3HpKfjuOriicIzg==
# =0GLo
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 06:47:55 AM PDT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]

* tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu: (30 commits)
  qga: use fixed-length and GDateTime for log timestamp
  tests/fuzz: fix warning
  qga: remove need for QEMU atomic.h
  util: replace qemu_get_local_state_pathname()
  util: use qemu_create() in qemu_write_pidfile()
  util: use qemu_write_full() in qemu_write_pidfile()
  util: simplify write in signal handler
  qtest: simplify socket_send()
  qga: move qga_get_host_name()
  Move error_printf_unless_qmp() with monitor unit
  tests: run-time skip test-qga if TSAN is enabled
  compiler.h: add QEMU_SANITIZE_{ADDRESS,THREAD}
  tests: remove block/qdict checks from check-qobject.c
  include: move qdict_{crumple,flatten} declarations
  include: add qemu/keyval.h
  include: move qemu_fdatasync() to osdep
  include: move qemu_msync() to osdep
  compiler.h: replace QEMU_NORETURN with G_NORETURN
  osdep.h: move qemu_build_not_reached()
  doc/style: CLang -> Clang
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
 * versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
 * versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
 * xlnx-zynqmp: Connect 4 TTC timers
 * exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
 * realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
 * stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
 * hw/core/irq: remove unused 'qemu_irq_split' function
 * npcm7xx: use symbolic constants for PWRON STRAP bit fields
 * virt: document impact of gic-version on max CPUs

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJhPSUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hAsD/4qzZK6LFL4kFH6E4z3tWIn
# ErHrfPGUt/SEfHLP+stQP/loFgkR1SNzcrIZ/HiDCB/W+IqQKuP+tHin2lMhO1tR
# KM6suUO1In2hoxfzimVta4F4GVN8ifY69qUYhaRxcBYSUpRXDNFJGsRIeT5JeUMd
# SArZUifRs7JUo25rIkg5Y+YZE37dmiA5gcuswtoLPa/UlDVqRxihLnItySmeutsc
# /Y8d/iym/ydlhvtL1OUt1KKYeg4ykrPzJCfvopsT2xgkwwB0PYci8//fa5IrRVlp
# Uw6yDssZrDIcXfVz88rdriILaszicCv8lOhTH6I74oXCatiyvi4BEzW8uGqVS8wt
# ff+AaKvGqb5t4GKKhCdpL2NzDwKBGWZHuruACs9IfvMkz62HE12Vr99qAKdQ3s93
# QnFIyUKg90mGkvKy8336zX3hnWjPH8wTASOXbNrgnt6GVLkqwy9ibug5kS+n77eJ
# BnkE5p3OfMVJ5a4o+iZbbDJKfzhNUHDSMIBbG1jRNzax1RgxOBtHFSqP5jmbpm+S
# agyr8h+Md0Tx1dwZKxdCGyvcbSZiG2WxRnci3dyT4MqYY1t1GEpOfcs1EN+CYKwG
# iuezZzJopjOFGaXQaB3OvbvCKxuroHKG61SmDmx+5OkfAxhrqe4ulwYij4jhsyhH
# t8zGzDOKLakv3li90xCX/w==
# =Rke9
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 04:16:53 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
  hw/arm: Use bit fields for NPCM7XX PWRON STRAPs
  hw/misc: Add PWRON STRAP bit fields in GCR module
  hw/arm/virt: impact of gic-version on max CPUs
  hw/core/irq: remove unused 'qemu_irq_split' function
  hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
  hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
  hw/arm/exynos4210: Drop Exynos4210Irq struct
  hw/arm/exynos4210: Put combiners into state struct
  hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()
  hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs
  hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners
  hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines
  hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()
  hw/arm/exynos4210: Delete unused macro definitions
  hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c
  hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct
  hw/arm/exynos4210: Put external GIC into state struct
  hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c
  hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]
  hw/arm/exynos4210: Coalesce board_irqs and irq_table
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

python/qmp: remove pylint workaround from legacy.py

Pylint upgraded recently (2.13.z) and having a pylint: disable comment
in the middle of an argument field causes it some grief (It appears to
stop parsing when it encounters it, causing some syntax problems). Since
the duplicate line threshold was bumped up in 22305c2a081b, we don't
need this workaround anymore. Drop it.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: rename 'aqmp-tui' to 'qmp-tui'

This is the last vestige of the "aqmp" moniker surviving in the tree; remove it.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: rename qemu.aqmp to qemu.qmp

Now that we are fully switched over to the new QMP library, move it back
over the old namespace. This is being done primarily so that we may
upload this package simply as "qemu.qmp" without introducing confusion
over whether or not "aqmp" is a new protocol or not.

The trade-off is increased confusion inside the QEMU developer
tree. Sorry!

Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp";
not out of necessity, but just to remove any traces of the "aqmp"
name.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: re-enable pylint duplicate-code warnings

With the old library gone, there's nothing duplicated in the tree, so
the warning suppression can be removed.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: remove the old QMP package

Thank you for your service!

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/aqmp: copy qmp docstrings to qemu.aqmp.legacy

Copy the docstrings out of qemu.qmp, adjusting them as necessary to
more accurately reflect the current state of this class.

(Licensing: This is copying and modifying GPLv2-only licensed docstrings
into a GPLv2-only file.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/aqmp: fully separate from qmp.QEMUMonitorProtocol

After this patch, qemu.aqmp.legacy.QEMUMonitorProtocol no longer
inherits from qemu.qmp.QEMUMonitorProtocol. To do this, several
inherited methods need to be explicitly re-defined.

(Licensing: This is copying and modifying GPLv2-only code into a
GPLv2-only file.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/aqmp: take QMPBadPortError and parse_address from qemu.qmp

Shift these definitions over from the qmp package to the async qmp
package.

(Licensing: this is a lateral move, from GPLv2 (only) to GPLv2 (only))

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: temporarily silence pylint duplicate-code warnings

The next several commits copy some code from qemu.qmp to qemu.aqmp, then
delete qemu.qmp. In the interim, to prevent test failures, the duplicate
code detection needs to be silenced to prevent bisect problems with CI
testing.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20220330172812.3427355-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/aqmp-tui: relicense as LGPLv2+

aqmp-tui, the async QMP text user interface tool, is presently licensed
as GPLv2+. I intend to include this tool as an add-on to an LGPLv2+
library package hosted on PyPI.org. I've selected LGPLv2+ to maximize
compatibility with other licenses while retaining a copyleft license.

To keep licensing matters simple, I'd like to relicense this tool as
LGPLv2+ as well in order to keep the resultant license of the hosted
release files simple -- even if library users won't "link against" this
command line tool.

Therefore, I am asking permission to loosen the license.

Niteesh is effectively the sole author of this code, with scattered
lines from myself.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-id: 20220325200438.2556381-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/qmp-shell: relicense as LGPLv2+

qmp-shell is presently licensed as GPLv2 (only). I intend to include
this tool as an add-on to an LGPLv2+ library package hosted on
PyPI.org. I've selected LGPLv2+ to maximize compatibility with other
licenses while retaining a copyleft license.

To keep licensing matters simple, I'd like to relicense this tool as
LGPLv2+ as well in order to keep the resultant license of the hosted
release files simple -- even if library users won't "link against" this
command line tool.

Therefore, I am asking permission from the current authors of this
tool to loosen the license. At present, those people are:

- John Snow (me!), 411/609
- Luiz Capitulino, Author, 97/609
- Daniel Berrangé, 81/609
- Eduardo Habkost, 10/609
- Marc-André Lureau, 6/609
- Fam Zheng, 3/609
- Cleber Rosa, 1/609

(All of which appear to have been written under redhat.com addresses.)

Eduardo's fixes are largely automated from 2to3 conversion tools and may
not necessarily constitute authorship, but his signature would put to
rest any questions.

Cleber's changes concern a single import statement change. Also won't
hurt to ask.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Fam Zheng <fam@euphon.net>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Eduardo Habkost <eduardo@habkost.net>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20220325200438.2556381-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/aqmp: relicense as LGPLv2+

I am the sole author of all of the async QMP code (python/qemu/aqmp)
with the following exceptions:

python/qemu/aqmp/qmp_shell.py and python/qemu/aqmp/legacy.py were
written by Luiz Capitulino (et al) and are already licensed separately
as GPLv2 (only).

aqmp_tui.py was written by Niteesh Babu G S and is licensed as GPLv2+.

I wish to relicense as LGPLv2+ in order to provide as much flexibility
as I reasonably can, while retaining a copyleft license. It is my belief
that LGPLv2+ is a suitable license for the Python ecosystem that aligns
with the goals and philosophy of the QEMU project.

The intent is to eventually drop legacy.py, leaving only library code
that is LGPLv2+.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220325200438.2556381-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/aqmp: add explicit GPLv2 license to legacy.py

The legacy.py module is heavily based on the QMP module by Luiz
Capitulino (et al) which is licensed as explicit GPLv2-only. The async
QMP package is currently licensed similarly, but I intend to relicense
the async package to the more flexible LGPLv2+.

In preparation for that change, make the license on legacy.py explicit.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220325200438.2556381-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

iotests: switch to AQMP

iotests is already using async QMP, but to finalize the switchover we
only need to update any remaining import paths to rely solely on the new
library instead.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-5-jsnow@redhat.com
[Fixed minor rebase conflict. --js]
Signed-off-by: John Snow <jsnow@redhat.com>

iotests/mirror-top-perms: switch to AQMP

We don't have to maintain compatibility with both QMP libraries anymore,
so we can just remove the old exception. While we're here, take
advantage of the extra fields present in the VMLaunchFailure exception
that machine.py now raises.

(Note: I'm leaving the logging suppression here unchanged. I had
suggested previously we use filters to scrub the PID out of the logging
information so it could just be diffed as part of the iotest output, but
that meant *always* scrubbing PID from logger output, which defeated the
point of even offering that information in the output to begin with.

Ultimately, I decided it's fine to just suppress the logger temporarily.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

scripts/bench-block-job: switch to AQMP

For this commit, we only need to remove accommodations for the
synchronous QMP library.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/machine: permanently switch to AQMP

Remove the QEMU_PYTHON_LEGACY_QMP environment variable, making the
switch from sync qmp to async qmp permanent. Update exceptions and
import paths as necessary.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

qga: use fixed-length and GDateTime for log timestamp

The old code is kind of wrong. Say it's 1649309843.000001 seconds past
the epoch. Prints "1649309843.1". 9us later, it prints "1649309843.10".
Should really use %06lu for the microseconds part.

Use GDateTime instead, as suggested by Daniel.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

tests/fuzz: fix warning

../tests/qtest/fuzz/generic_fuzz.c:746:17: warning: variable 'name' set but not used [-Wunused-but-set-variable]

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220420132624.2439741-42-marcandre.lureau@redhat.com>

qga: remove need for QEMU atomic.h

Since the introduction of guest-exec in/out/err redirections in commit
a1853dca74 ("qga: guest-exec simple stdin/stdout/stderr redirection"),
some execution state variables are handled with atomic ops. However,
there are no threads involved in this code (and glib sources are
dispatched in the same thread), and no other obvious reason to use them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-40-marcandre.lureau@redhat.com>

util: replace qemu_get_local_state_pathname()

Simplify the function to only return the directory path. Callers are
adjusted to use the GLib function to build paths, g_build_filename().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-39-marcandre.lureau@redhat.com>

util: use qemu_create() in qemu_write_pidfile()

qemu_open_old(O_CREATE) should be replaced with qemu_create() which
handles Error reporting.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-38-marcandre.lureau@redhat.com>

util: use qemu_write_full() in qemu_write_pidfile()

Mostly for correctness.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-37-marcandre.lureau@redhat.com>

util: simplify write in signal handler

Use qemu_write_full() instead of open-coding a write loop.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-36-marcandre.lureau@redhat.com>

qtest: simplify socket_send()

Reuse qemu_write_full().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220420132624.2439741-33-marcandre.lureau@redhat.com>

qga: move qga_get_host_name()

The function is specific to qemu-ga, no need to share it in QEMU.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220420132624.2439741-32-marcandre.lureau@redhat.com>

Move error_printf_unless_qmp() with monitor unit

Since it depends on monitor code, and error_vprintf_unless_qmp() is
already there.

This will help to move error-report in a common subproject.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-31-marcandre.lureau@redhat.com>

tests: run-time skip test-qga if TSAN is enabled

This allows to make sure the test is still built, and gives more
accurate report details.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-30-marcandre.lureau@redhat.com>

compiler.h: add QEMU_SANITIZE_{ADDRESS,THREAD}

Simplify a bit pre-compiler conditions.

For TSAN, QEMU already has CONFIG_TSAN, but it is only set when the
fiber API is present. (I wonder whether supporting TSAN without the
fiber API is really relevant)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-27-marcandre.lureau@redhat.com>

tests: remove block/qdict checks from check-qobject.c

The functions are already covered in check-block-qdict.c.
This will help moving QAPI-related tests in a common subproject.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-26-marcandre.lureau@redhat.com>

include: move qdict_{crumple,flatten} declarations

Move them where they belong, since the functions are implemented in block-qdict.c.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-25-marcandre.lureau@redhat.com>

include: add qemu/keyval.h

Do not require the whole option machinery to handle keyval, as it is
used by QAPI alone, without the option API. And match the associated
unit name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-24-marcandre.lureau@redhat.com>

include: move qemu_fdatasync() to osdep

Move QEMU-specific code to util/osdep.c, so cutils can become a common
subproject.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-22-marcandre.lureau@redhat.com>

include: move qemu_msync() to osdep

The implementation depends on the OS. (and longer-term goal is to move
cutils to a common subproject)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-21-marcandre.lureau@redhat.com>

compiler.h: replace QEMU_NORETURN with G_NORETURN

G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.

Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>

osdep.h: move qemu_build_not_reached()

Move the macro and declaration so it can use glib in the following
patch (it already depends on glib anyway for !optimize)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-19-marcandre.lureau@redhat.com>

doc/style: CLang -> Clang

It's not the way it is usually written (see https://clang.llvm.org/).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-17-marcandre.lureau@redhat.com>