sparc: convert cpu models to SPARC cpu subclasses

QOMfy cpu models handling introducing propper cpu types
for each cpu model.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1503592308-93913-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: cpu: fix parsed feature string length

since commit ( 9262685b cpu: Factor out cpu_generic_init() )
features parsed by it were truncated only to the 1st feature
after CPU name due to fact that

   featurestr = strtok(NULL, ",");
   cc->parse_features(cpu, featurestr, &err);

would extract exactly one feature and parse_features() callback
would parse it and only it leaving the rest of features ignored.

Reuse approach from x86 custom impl. i.e. replace strtok() token
parsing with g_strsplit(), which would split feature string in
2 parts name and features list and pass the later to
parse_features() callback.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1503592308-93913-2-git-send-email-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

target-i386/cpu: Add new EPYC CPU model

Add a new base CPU model called 'EPYC' to model processors from AMD EPYC
family (which includes EPYC 76xx,75xx,74xx, 73xx and 72xx).

The following features bits have been added/removed compare to Opteron_G5

Added: monitor, movbe, rdrand, mmxext, ffxsr, rdtscp, cr8legacy, osvw,
       fsgsbase, bmi1, avx2, smep, bmi2, rdseed, adx, smap, clfshopt, sha
       xsaveopt, xsavec, xgetbv1, arat

Removed: xop, fma4, tbm

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20170815170051.127257-1-brijesh.singh@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

hmp: allow apic-id for "info lapic"

Add [apic-id] support for hmp command "info lapic", which is
useful when debugging ipi and so on. Current behavior is not
changed when the parameter isn't specified.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Yun Liu <liu.yunh@zte.com.cn>
Message-Id: <1501049917-4701-3-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

cpu: cpu_by_arch_id() helper

The helper can be used for CPU object lookup using the CPU's
arch-specific ID (the one returned by CPUClass::get_arch_id()).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Yi Wang: Added documentation comments]
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Yun Liu <liu.yunh@zte.com.cn>
[ehabkost: extracted cpu_by_arch_id() to a separate patch]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: Remove unused errp parameter from can_be_deleted()

The errp argument is ignored by all implementations of the
method, and user_creatable_del() would break if any
implementation set an error (because it calls error_setg(errp) if
the function returns false).  Remove the unused parameter.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170829220337.23427-1-ehabkost@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Merge remote-tracking branch 'remotes/elmarco/tags/tidy-pull-request' into staging

# gpg: Signature made Thu 31 Aug 2017 11:29:33 BST
# gpg:                using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/tidy-pull-request: (29 commits)
  eepro100: replace g_malloc()+memcpy() with g_memdup()
  test-iov: replace g_malloc()+memcpy() with g_memdup()
  i386: replace g_malloc()+memcpy() with g_memdup()
  i386: introduce ELF_NOTE_SIZE macro
  decnumber: use DIV_ROUND_UP
  kvm: use DIV_ROUND_UP
  i386/dump: use DIV_ROUND_UP
  ppc: use DIV_ROUND_UP
  msix: use DIV_ROUND_UP
  usb-hub: use DIV_ROUND_UP
  q35: use DIV_ROUND_UP
  piix: use DIV_ROUND_UP
  virtio-serial: use DIV_ROUND_UP
  console: use DIV_ROUND_UP
  monitor: use DIV_ROUND_UP
  virtio-gpu: use DIV_ROUND_UP
  vga: use DIV_ROUND_UP
  ui: use DIV_ROUND_UP
  vnc: use DIV_ROUND_UP
  vvfat: use DIV_ROUND_UP
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Thu 31 Aug 2017 09:21:49 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  qcow2: allocate cluster_cache/cluster_data on demand
  qemu-doc: Add UUID support in initiator name
  tests: migration/guestperf Python 2.6 argparse compatibility
  docker.py: Python 2.6 argparse compatibility
  scripts: add argparse module for Python 2.6 compatibility
  misc: Remove unused Error variables
  oslib-posix: Print errors before aborting on qemu_alloc_stack()
  throttle: Test the valid range of config values
  throttle: Make burst_length 64bit and add range checks
  throttle: Make LeakyBucket.avg and LeakyBucket.max integer types
  throttle: Remove throttle_fix_bucket() / throttle_unfix_bucket()
  throttle: Make throttle_is_valid() a bit less verbose
  throttle: Update the throttle_fix_bucket() documentation
  throttle: Fix wrong variable name in the header documentation
  nvme: Fix get/set number of queues feature, again

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-08-30' into staging

nbd patches for 2017-08-30

- Kashyap Chamarthy: qemu-iotests: Extend non-shared storage migration test (194)
- Stefan Hajnaczi: 0/3 nbd-client: enter read_reply_co during init to avoid crash
- Vladimir Sementsov-Ogievskiy: portions of 0/17 nbd client refactoring and fixing

# gpg: Signature made Wed 30 Aug 2017 19:03:46 BST
# gpg:                using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2017-08-30:
  block/nbd-client: refactor request send/receive
  block/nbd-client: rename nbd_recv_coroutines_enter_all
  block/nbd-client: get rid of ssize_t
  nbd/client: fix nbd_send_request to return int
  nbd/client: refactor nbd_receive_reply
  nbd/client: refactor nbd_read_eof
  nbd/client: fix nbd_opt_go
  qemu-iotests: test NBD over UNIX domain sockets in 083
  qemu-iotests: improve nbd-fault-injector.py startup protocol
  nbd-client: avoid read_reply_co entry if send failed
  qemu-iotests: Extend non-shared storage migration test (194)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170830' into staging

First batch of s390x patches:
- 2.11 compat machine
- support the new --s390-pgste linker option, making it possible to
  avoid enabling the global vm.allocate_pgste systl if all pieces
  are in place
- correctly identify some devices as not hotpluggable
- clean up some tests and enable them for s390x
- wire up the diag288 watchdog in tcg
- clean up dependencies on CONFIG_PCI, making it possible to disable
  it by hand
- lots of cleanup in target/s390x/
- fix alignment of the ccw1 structure in the s390-ccw bios
- and some more bugfixes

# gpg: Signature made Wed 30 Aug 2017 17:40:34 BST
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20170830: (44 commits)
  s390x/pci: fixup trap_msix()
  pc-bios/s390-ccw.img: update image
  s390-ccw: Fix alignment for CCW1
  s390x/s390-stattrib: Mark the storage attribute as not user_creatable
  target/s390x: cleanup cpu.h
  s390x/kvm: move KVM declarations and stubs to separate files
  s390x: avoid calling kvm_ functions outside of target/s390x/
  target/s390x: move a couple of functions to cpu.c
  target/s390x: introduce internal.h
  target/s390x: move get_per_in_range() to misc_helper.c
  target/s390x: move s390_do_cpu_reset() to diag.c
  target/s390x: move psw_key_valid() to mem_helper.c
  target/s390x: move cpu_mmu_idx_to_asc() to excp_helper.c
  target/s390x: move cc_name() to helper.c
  target/s390x: move gtod_*() declarations to s390-virtio.h
  s390x: drop inclusion of sysemu/kvm.h from some files
  s390x/cpumodel: factor out determination of default model name
  target/s390x: no need to pass kvm_state to savevm_gtod handlers
  target/s390x: simplify gs_allowed()
  target/s390x: simplify ri_allowed()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

eepro100: replace g_malloc()+memcpy() with g_memdup()

I found these pattern via grepping the source tree. I don't have a
coccinelle script for it!

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

test-iov: replace g_malloc()+memcpy() with g_memdup()

I found these pattern via grepping the source tree. I don't have a
coccinelle script for it!

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

i386: replace g_malloc()+memcpy() with g_memdup()

I found these pattern via grepping the source tree. I don't have a
coccinelle script for it!

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

i386: introduce ELF_NOTE_SIZE macro

Factour out a common pattern to compute the ELF note size.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

decnumber: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

kvm: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

i386/dump: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

ppc: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>

msix: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

usb-hub: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

q35: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

piix: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

virtio-serial: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Amit Shah <amit@kernel.org>

console: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

monitor: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

virtio-gpu: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

vga: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

ui: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

vnc: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

vvfat: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

vpc: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

qcow2: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

dmg: use DIV_ROUND_UP

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

pcspk: use QEMU_ALIGN_DOWN

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

i8254: use QEMU_ALIGN_DOWN

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

vhost: use QEMU_ALIGN_DOWN

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

vhdx: use QEMU_ALIGN_DOWN

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

vnc: use QEMU_ALIGN_DOWN

I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

i386: use ROUND_UP macro

I used the clang-tidy qemu-round check (with the option OnlyAlignUp)
to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

slirp: fix clearing ifq_so from pending packets

The if_fastq and if_batchq contain not only packets, but queues of packets
for the same socket. When sofree frees a socket, it thus has to clear ifq_so
from all the packets from the queues, not only the first.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Open 2.11 development tree

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

block/nbd-client: refactor request send/receive

Add nbd_co_request, to remove code duplications in
nbd_client_co_{pwrite,pread,...} functions. Also this is
needed for further refactoring.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-8-vsementsov@virtuozzo.com>
[eblake: make nbd_co_request a wrapper, rather than merging two
existing functions]
Signed-off-by: Eric Blake <eblake@redhat.com>

block/nbd-client: rename nbd_recv_coroutines_enter_all

Rename nbd_recv_coroutines_enter_all to nbd_recv_coroutines_wake_all,
as it most probably just adds all recv coroutines into co_queue_wakeup,
rather than directly enter them.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-9-vsementsov@virtuozzo.com>
[eblake: tweak commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>

block/nbd-client: get rid of ssize_t

Use int variable for nbd_co_send_request return value (as
nbd_co_send_request returns int).

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

nbd/client: fix nbd_send_request to return int

Fix nbd_send_request to return int, as it returns a return value
of nbd_write (which is int), and the only user of nbd_send_request's
return value (nbd_co_send_request) consider it as int too.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

nbd/client: refactor nbd_receive_reply

Refactor nbd_receive_reply to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of read
data is not actually used.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-4-vsementsov@virtuozzo.com>
[eblake: tweak function comments]
Signed-off-by: Eric Blake <eblake@redhat.com>

nbd/client: refactor nbd_read_eof

Refactor nbd_read_eof to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of
read data is not actually used.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-3-vsementsov@virtuozzo.com>
[eblake: tweak function comments, rebase to test 083 enhancements]
Signed-off-by: Eric Blake <eblake@redhat.com>

nbd/client: fix nbd_opt_go

Do not send NBD_OPT_ABORT to the broken server. After sending
NBD_REP_ACK on NBD_OPT_GO server is most probably in transmission
phase, when option sending is finished.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

qemu-iotests: test NBD over UNIX domain sockets in 083

083 only tests TCP.  Some failures might be specific to UNIX domain
sockets.

A few adjustments are necessary:

1. Generating a port number and waiting for server startup is
   TCP-specific.  Use the new nbd-fault-injector.py startup protocol to
   fetch the address.  This is a little more elegant because we don't
   need netstat anymore.

2. The NBD filter does not work for the UNIX domain sockets URIs we
   generate and must be extended.

3. Run all tests twice: once for TCP and once for UNIX domain sockets.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-4-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

qemu-iotests: improve nbd-fault-injector.py startup protocol

Currently 083 waits for the nbd-fault-injector.py server to start up by
looping until netstat shows the TCP listen socket.

The startup protocol can be simplified by passing a 0 port number to
nbd-fault-injector.py.  The kernel will allocate a port in bind(2) and
the final port number can be printed by nbd-fault-injector.py.

This should make it slightly nicer and less TCP-specific to wait for
server startup.  This patch changes nbd-fault-injector.py, the next one
will rewrite server startup in 083.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-3-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

nbd-client: avoid read_reply_co entry if send failed

The following segfault is encountered if the NBD server closes the UNIX
domain socket immediately after negotiation:

  Program terminated with signal SIGSEGV, Segmentation fault.
  #0  aio_co_schedule (ctx=0x0, co=0xd3c0ff2ef0) at util/async.c:441
  441       QSLIST_INSERT_HEAD_ATOMIC(&ctx->scheduled_coroutines,
  (gdb) bt
  #0  0x000000d3c01a50f8 in aio_co_schedule (ctx=0x0, co=0xd3c0ff2ef0) at util/async.c:441
  #1  0x000000d3c012fa90 in nbd_coroutine_end (bs=bs@entry=0xd3c0fec650, request=<optimized out>) at block/nbd-client.c:207
  #2  0x000000d3c012fb58 in nbd_client_co_preadv (bs=0xd3c0fec650, offset=0, bytes=<optimized out>, qiov=0x7ffc10a91b20, flags=0) at block/nbd-client.c:237
  #3  0x000000d3c0128e63 in bdrv_driver_preadv (bs=bs@entry=0xd3c0fec650, offset=offset@entry=0, bytes=bytes@entry=512, qiov=qiov@entry=0x7ffc10a91b20, flags=0) at block/io.c:836
  #4  0x000000d3c012c3e0 in bdrv_aligned_preadv (child=child@entry=0xd3c0ff51d0, req=req@entry=0x7f31885d6e90, offset=offset@entry=0, bytes=bytes@entry=512, align=align@entry=1, qiov=qiov@entry=0x7ffc10a91b20, f
+lags=0) at block/io.c:1086
  #5  0x000000d3c012c6b8 in bdrv_co_preadv (child=0xd3c0ff51d0, offset=offset@entry=0, bytes=bytes@entry=512, qiov=qiov@entry=0x7ffc10a91b20, flags=flags@entry=0) at block/io.c:1182
  #6  0x000000d3c011cc17 in blk_co_preadv (blk=0xd3c0ff4f80, offset=0, bytes=512, qiov=0x7ffc10a91b20, flags=0) at block/block-backend.c:1032
  #7  0x000000d3c011ccec in blk_read_entry (opaque=0x7ffc10a91b40) at block/block-backend.c:1079
  #8  0x000000d3c01bbb96 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:79
  #9  0x00007f3196cb8600 in __start_context () at /lib64/libc.so.6

The problem is that nbd_client_init() uses
nbd_client_attach_aio_context() -> aio_co_schedule(new_context,
client->read_reply_co).  Execution of read_reply_co is deferred to a BH
which doesn't run until later.

In the mean time blk_co_preadv() can be called and nbd_coroutine_end()
calls aio_wake() on read_reply_co.  At this point in time
read_reply_co's ctx isn't set because it has never been entered yet.

This patch simplifies the nbd_co_send_request() ->
nbd_co_receive_reply() -> nbd_coroutine_end() lifecycle to just
nbd_co_send_request() -> nbd_co_receive_reply().  The request is "ended"
if an error occurs at any point.  Callers no longer have to invoke
nbd_coroutine_end().

This cleanup also eliminates the segfault because we don't call
aio_co_schedule() to wake up s->read_reply_co if sending the request
failed.  It is only necessary to wake up s->read_reply_co if a reply was
received.

Note this only happens with UNIX domain sockets on Linux.  It doesn't
seem possible to reproduce this with TCP sockets.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-2-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

qemu-iotests: Extend non-shared storage migration test (194)

This is the follow-up patch that was discussed[*] as part of feedback to
qemu-iotest 194.

Changes in this patch:

  - Supply 'job-id' parameter to `drive-mirror` invocation.

  - Once migration completes, issue QMP `block-job-cancel` command on
    the source QEMU to gracefully complete `drive-mirror` operation.

  - Once the BLOCK_JOB_COMPLETED event is emitted, stop the NBD server
    on the destination QEMU.

  - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED.

With the above, the test will also be (almost) in sync with the
procedure outlined in the document 'live-block-operations.rst'[+]
(section: "QMP invocation for live storage migration with
``drive-mirror`` + NBD").

[*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html
    -- qemu-iotests: add 194 non-shared storage migration test
[+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst

Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20170829165058.8229-1-kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

qcow2: allocate cluster_cache/cluster_data on demand

Most qcow2 files are uncompressed so it is wasteful to allocate (32 + 1)
* cluster_size + 512 bytes upfront.  Allocate s->cluster_cache and
s->cluster_data when the first read operation is performance on a
compressed cluster.

The buffers are freed in .bdrv_close().  .bdrv_open() no longer has any
code paths that can allocate these buffers, so remove the free functions
in the error code path.

This patch can result in significant memory savings when many qcow2
disks are attached or backing file chains are long:

Before 12.81% (1,023,193,088B)
After   5.36% (393,893,888B)

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170821135530.32344-1-stefanha@redhat.com
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

s390x/pci: fixup trap_msix()

The function trap_msix() is to check if pcistg instruction would access
msix table entries. The correct boundary condition should be
[table_offset, table_offset+entries*entry_size). But the current
condition calculated misses the last entry. So let's fixup it.

Acked-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1503907487-2764-2-git-send-email-zyimin@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

pc-bios/s390-ccw.img: update image

Contains the following commit:
- s390-ccw: Fix alignment for CCW1

Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390-ccw: Fix alignment for CCW1

The commit 198c0d1f9df8c4 s390x/css: check ccw address validity
exposes an alignment issue in ccw bios.

According to PoP the CCW must be doubleword aligned. Let's fix
this in the bios.

Cc: qemu-stable@nongnu.org
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <3ed8b810b6592daee6a775037ce21f850e40647d.1503667215.git.alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/s390-stattrib: Mark the storage attribute as not user_creatable

The storage attribute devices are only meant to be instantiated one
time, internally. They can not be used by the user, so mark them with
user_creatable = false.

Suggested-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503576029-24264-1-git-send-email-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: cleanup cpu.h

Let's reshuffle the function prototypes so we get a cleaner outline
of the files.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/kvm: move KVM declarations and stubs to separate files

Let's do it just like the other architectures. Introduce kvm-stub.c
for stubs and kvm_s390x.h for the declarations.

Change license to GPL2+ and keep copyright notice.

As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes.

Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: avoid calling kvm_ functions outside of target/s390x/

Let's just introduce an helper.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: move a couple of functions to cpu.c

Prepare to move more stuff (especially KVM related) from cpu.h to
internal.h.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: introduce internal.h

cpu.h should only contain what really has to be accessed outside of
target/s390x/. Add internal.h which can only be used inside target/s390x/.

Move everything that isn't fast enough to run away and restructure it
right away. We'll move all kvm_* stuff later.

Minor style fixes to avoid checkpatch warning to:
- struct Lowcore: "{" goes into same line as typedef
- struct LowCore: add spaces around "-" in array length calculations
- time2tod() and tod2time(): move "{" to separate line
- get_per_atmid(): add space between ")" and "?". Move cases by one char.
- get_per_atmid(): drop extra paremthesis around (1 << 6)

Change license of new file to GPL2+ and keep copyright notice.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: move get_per_in_range() to misc_helper.c

Only used in that file.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: move s390_do_cpu_reset() to diag.c

Only used in that file. Also drop the comment, not really needed.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: move psw_key_valid() to mem_helper.c

Only used in that file.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: move cpu_mmu_idx_to_asc() to excp_helper.c

Only used in that file.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: move cc_name() to helper.c

While at it, move the translations into the function and properly pass
enum cc_op as parameter. We can't move it to cc_helper.c as this would
break --disable-tcg.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: move gtod_*() declarations to s390-virtio.h

The functions are not used in target/s390x/ so a header in hw/s390x/
is a better place.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: drop inclusion of sysemu/kvm.h from some files

s390-stattrib.c needs definition of TARGET_PAGE_SIZE, solve it via cpu.h.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/cpumodel: factor out determination of default model name

Now we can drop inclusion of "sysemu/kvm.h" from "s390-virtio.c".

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-7-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: no need to pass kvm_state to savevm_gtod handlers

Let's avoid any KVM stuff in s390-virtio-ccw.c. This parameter is simply
ignored.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-6-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: simplify gs_allowed()

No need for kvm_enabled() as this function is only called from KVM and
there is no reason why it shouldn't be allowed for tcg. It is simply not
available under tcg.

Also, there is no need to check for the machine type anymore. Just like
ri_enabled(), we can directly use the stored flag, which results in
"true" for the "none" machine.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-5-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: simplify ri_allowed()

Only used in KVM and there is no reason why it shouldn't be allowed for
tcg - it is simply not available.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/kvm: drop KVMState parameter from kvm_s390_set_mem_limit()

Not needed at that point. Also drop it from kvm_s390_query_mem_limit()
we call in kvm_s390_set_mem_limit().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/kvm: drop KVMState parameter from s390_get_memslot_count()

Not needed at that point.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/s390-skeys: Mark the storage key devices with user_creatable = false

QEMU currently aborts if the user tries to create a skey device:

$ s390x-softmmu/qemu-system-s390x -nographic -device s390-skeys-qemu
qemu-system-s390x: hw/s390x/s390-skeys.c:30: s390_get_skeys_device:
 Assertion `ss' failed.
Aborted (core dumped)

The storage key devices are only meant to be instantiated one time,
internally. They can not be used by the user, so mark them with
user_creatable = false.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503569328-22197-1-git-send-email-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: refine pci dependencies

VIRTIO_PCI should properly depend on CONFIG_PCI.
With this change, we can switch off pci for s390x by removing
'CONFIG_PCI=y' from the default config.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/pci: fence off instructions for non-pci

If a guest running on a machine without zpci issues a pci instruction,
throw them an exception.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/sclp: properly guard pci-specific functions

If we do not provide zpci, pci reconfiguration via sclp is not available
either. I/O adapter configuration, however, should always be present.

Rename the values that refer to I/O adapter configuration (instead of only
pci) to make things clearer.

Move length checking of the sccb for I/O adapter configuration into the
common sclp code (out of the pci code). This also fixes an issue that
the pci code would refer to a field in the sccb before checking whether
it was actually long enough.

Check for the adapter type in the sccb and return unrecognized adapter
type if the guest tries to issue I/O adapter configure/deconfigure for
a type other than pci or for pci if the zpci facility is not provided.

Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/ccw: create s390 phb conditionally

Don't create the s390 pci host bridge if we do not provide the zpci
facility.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/pci: do not advertise pci on non-pci builds

Only set the zpci feature bit on builds that actually support pci.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: chsc nt2 events are pci-only

The nt2 event class is pci-only - don't look for events if pci is
not in the active cpu model.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/pci: add stubs

Some non-pci code calls into zpci code. Provide some stubs for builds
without pci.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

kvm: remove hard dependency on pci

The msi routing code in kvm calls some pci functions: provide
some stubs to enable builds without pci.

Also, to make this more obvious, guard them via a pci_available boolean
(which also can be reused in other places).

Fixes: e1d4fb2de ("kvm-irqchip: x86: add msi route notify fn")
Fixes: 767a554a0 ("kvm-all: Pass requester ID to MSI routing functions")
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

9pfs: fix dependencies

Nothing in fsdev/ or hw/9pfs/ depends on pci; it should rather depend
on CONFIG_VIRTFS and CONFIG_VIRTIO/CONFIG_XEN only.

Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

configure: enable --s390-pgste linker option

KVM guests on s390 need a different page table layout than normal
processes (2kb page table + 2kb page status extensions vs 2kb page table
only). As of today this has to be enabled via the vm.allocate_pgste
sysctl.

Newer kernels (>= 4.12) on s390 check for an S390_PGSTE program header
and enable the pgste page table extensions in that case. This makes the
vm.allocate_pgste sysctl unnecessary. We enable this program header for
the s390 system emulation (qemu-system-s390x) if we build on s390
- for s390 system emulation
- the linker supports --s390-pgste (binutils >= 2.29)
- KVM is enabled

This will allow distributions to disable the global vm.allocate_pgste
sysctl, which will improve the page table allocation for non KVM
processes as only 2kb chunks are necessary.

Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Dan Horak <dhorak@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503483383-199649-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: wire up diag288 in tcg

Make the diag288 watchdog useable via tcg as well.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

watchdog/wdt_diag288: Mark diag288 watchdog as non-hotpluggable

QEMU currently aborts when the user tries to hot-unplug a diag288
device:

$ qemu-system-s390x -nographic -nodefaults -S -monitor stdio
QEMU 2.9.92 monitor - type 'help' for more information
(qemu) device_add diag288,id=x
(qemu) device_del x
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)

The device is not designed as hot-pluggable (it should only be used
via the "-watchdog" parameter), so let's simply remove the possibility
to hotplug it to prevent that users can run into this ugly situation.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1502892528-22618-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/tcg: specification exception for unknown diag

While the PoP is silent on the issue, z/VM documentation states
that unknown diagnose codes trigger a specification exception.
We already do that when running with kvm, so change tcg to do so
as well.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

tests: Add network filter tests to the check-qtest-s390x list

With some small modifications, we can also use the the netfilter,
the filter-mirror and the filter-redirector tests on s390x.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-3-git-send-email-thuth@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

tests: Run filter-redirector and -mirror test only on POSIX systems

This way we can get rid of the ugly #ifdefs in the code which makes
it easier to extend later.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-2-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

tests/pxe: Check virtio-net-ccw on s390x

Now that we've got a firmware that can do TFTP booting on s390x (i.e.
the pc-bios/s390-netboot.img), we can enable the PXE tester for this
architecture, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

tests/boot-sector: Do not overwrite the x86 buffer on other architectures

Re-using the boot_sector code buffer from x86 for other architectures
is not very nice, especially if we add more architectures later. It's
also ugly that the test uses a huge pre-initialized array at all - the
size of the executable is very huge due to this array. So let's use a
separate buffer for each architecture instead, allocated from the heap,
so that we really just use the memory that we need.

Suggested-by: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-2-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/ipl: The s390-ipl device is not hot-pluggable

The s390-ipl device can not be created by the user, since it is meant only
to  be instantiated once internally to load the ROMs and kernel. If the user
tries to do a "device_add s390-ipl" via the monitor later, QEMU aborts with
a "ROM images must be loaded at startup" error message.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1502861458-30270-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: introduce 2.11 compat machine

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/css: generate solicited crw for rchp completion signaling

A successful completion of rchp should signal a solicited channel path
initialized CRW (channel report word), while the current implementation
always generates an un-solicited one. Let's fix this.

Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/css: use macro for event-information pending error recover code

Let's use a macro for the ERC (error recover code) when generating a
Channel Subsystem Event-information pending CRW (channel report word).

While we are at it, let's also add all other ERCs.

Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Update version for v2.10.0 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qemu-doc: Add UUID support in initiator name

Update doc with the usage of UUID for initiator name.

Related-To: https://bugzilla.redhat.com/1006468
Signed-off-by: Fred Rolland <frolland@redhat.com>
Message-id: 20170823084830.30500-1-frolland@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

tests: migration/guestperf Python 2.6 argparse compatibility

Add the scripts/ directory to sys.path so Python 2.6 will be able to
import argparse.

Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20170825155732.15665-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>