ASoC: Intel: sof_da7219: rename driver file and kernel option

Rename the driver file and kernel option to be consistent with other
SOF machine drivers.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_nau8825: use realtek-common module

Use realtek-common module to support rt1019p speaker amplifier.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_nau8825: use nuvoton-common module

Use nuvoton-common module to support nau8318 speaker amplifier.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: nuvoton-common: support nau8318 amplifier

Implement nau8318 support code in this common module so it could be
shared between multiple SOF machine drivers.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_ssp_amp: do not create amp link for nocodec board

A BE DAI link for speaker amplifier is always created even a board
quirk specifies there is no amplifier. Modify the driver to check
amplifier type before creating corresponding DAI link.

The topology (sof-tgl-rt1308-hdmi-ssp.m4) which supports HDMI-IN is
using fixed BE ID for each DAI link. Therefore we also uses fixed ID
in machine driver side.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: add HDMI_In capture feature support for RPL.

Added HDMI-in capture support for RPL boards. previously it used adl
machines and now its moved into separate match entry.

Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: add adl_rt5650 board config

This configuration supports ADL boards which implement ALC5650 dual
I2S interface codec. Two DAI links are added: AIF1 (on codec side) for
headphone and AIF2 for speakers.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: Modify number of HDMI to 3 for MTL/Rex devices

For all MTL/Rex devices, number of HDMI supported is 3.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: Add support for Rex with discrete BT offload.

System firmware has included additional audio DMI string
MAX98360_ALC5682I_DISCRETE_I2S_BT for discrete BT offload
supporting devices. Same DMI string match is introduced
in sof_rt5682_quirk_table.

Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_nau8825: use ssp-common module to detect codec

Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_ssp_amp: use ssp-common module to detect codec

Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_cs42l42: use ssp-common module to detect codec

Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: use ssp-common module to detect codec

Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.
Due to codec detection feature, we could remove HP Dooly's DMI quirk
safely.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: use ACPI HID definition in ssp-common

Use ACPI HID definition in ssp-common header for device name macros.
No functional change here.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: ssp-common: support codec detection

Create a new common module to host functions which could be shared
among SSP machine drivers. Add functions to detect headphone codec and
speaker amplifier via ACPI system at runtime in order to remove codec
type quirks in machine drivers.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: cleanup unnecessary quirk flag

Remove SOF_RT5682_MCLK_24MHZ flag from JSL and CML/WHL board configs
since the information could be retrieved from SOF API. The macro
itself is removed as well.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Add deep buffer size to debug prints

Print deep_buffer_dma_ms and dma_buffer_size for debug purpose.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230914130303.13636-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4: Dump the payload also when set_get_data fails

Move the out label to dump the message payload when the IPC message fails.
The payload contains important information on what might have caused the
error in firmware.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230914125115.30904-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ops.h: Change the error code for not supported to EOPNOTSUPP

New code uses ENOTSUPP as per checkpatch recommendation:
ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230914124943.24399-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: acp: Fix -Wmissing-prototypes warning

Fix prototype missing warning for acp3x_es83xx_init_ops() by
including the header acp3x-es83xx.h

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309111220.g63yHDfH-lkp@intel.com/
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230913210916.2523-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l56: Use PCI SSID to select specific

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

The PCI device registers contain a subsystem ID (SSID), that is
separate from the silicon ID. The PCI specification defines it thus:

"They provide a mechanism for board vendors to distiguish their
 boards from one another even thought the boards may have the same
 PCI controller on them."

This allows the driver for the silicon part to apply board-speficic
settings based on this SSID.

The CS35L56 driver uses this to select the correct firmware file for
the board. The actual ID is part of the PCI register set of the
host audio interface so this set of patches includes extracting the
SSID from the Intel audio controller and passing it to the machine
driver and then to ASoC components. Other PCI audio controllers
will have the same SSID registers, so can use the same mechanism to
pass the SSID.

ASoC: nau8821: Revise MICBIAS control for power saving.

The patch helps save power by control MICBIAS. The headset's
MICBIAS should be disabled without button requirement.

Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20230913064003.2925997-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: hdac_hdmi: Remove temporary string use in create_fill_jack_kcontrols

There is no need to use temporary strings to construct the kcontrol names,
devm_kasprintf can be used to replace the snprintf + devm_kstrdup pairs.

This change will also fixes the following compiler warning/error (W=1):

sound/soc/codecs/hdac_hdmi.c: In function ‘hdac_hdmi_jack_port_init’:
sound/soc/codecs/hdac_hdmi.c:1793:63: error: ‘ Switch’ directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
 1793 |                         snprintf(kc_name, sizeof(kc_name), "%s Switch", xname);
      |                                                               ^~~~~~~
In function ‘create_fill_jack_kcontrols’,
    inlined from ‘hdac_hdmi_jack_port_init’ at sound/soc/codecs/hdac_hdmi.c:1871:8:
sound/soc/codecs/hdac_hdmi.c:1793:25: note: ‘snprintf’ output between 8 and 39 bytes into a destination of size 32
 1793 |                         snprintf(kc_name, sizeof(kc_name), "%s Switch", xname);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1")

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230913091325.16877-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l56: Use PCI SSID as the firmware UID

If the driver properties do not define a cirrus,firmware-uid try to get the
PCI SSID as the UID.

On PCI-based systems the PCI SSID is used to uniquely identify the specific
sound hardware. This is the standard mechanism for x86 systems and is the
way to get a unique system identifier for systems that use the CS35L56 on
SoundWire.

For non-SoundWire systems there is no Windows equivalent of the ASoC driver
in I2C/SPI mode. These would be:

1. HDA systems, which are handled by the HDA subsystem.
2. Linux-specific systems.
3. Composite devices where the cs35l56 is not present in ACPI and is
   configured using software nodes.

Case 2 can use the firmware-uid property, though the PCI SSID is supported
as an alternative, as it is the standard PCI mechanism.

Case 3 is a SoundWire system where some other codec is the SoundWire bridge
device and CS35L56 is not listed in ACPI. As these are SoundWire systems
they will normally use the PCI SSID.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: Copy PCI SSID to struct snd_soc_card

If the PCI SSID has been set in the struct snd_soc_acpi_mach_params,
copy this to struct snd_soc_card so that it can be used by other
ASoC components.

This is important for components that must apply system-specific
configuration.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Pass PCI SSID to machine driver

Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.

struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.

PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.

sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.

sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.

The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-card: Add storage for PCI SSID

Add members to struct snd_soc_card to store the PCI subsystem ID (SSID)
of the soundcard.

The PCI specification provides two registers to store a vendor-specific
SSID that can be read by drivers to uniquely identify a particular
"soundcard". This is defined in the PCI specification to distinguish
products that use the same silicon (and therefore have the same silicon
ID) so that product-specific differences can be applied.

PCI only defines 0xFFFF as an invalid value. 0x0000 is not defined as
invalid. So the usual pattern of zero-filling the struct and then
assuming a zero value unset will not work. A flag is included to
indicate when the SSID information has been filled in.

Unlike DMI information, which has a free-format entirely up to the vendor,
the PCI SSID has a strictly defined format and a registry of vendor IDs.

It is usual in Windows drivers that the SSID is used as the sole identifier
of the specific end-product and the Windows driver contains tables mapping
that to information about the hardware setup, rather than using ACPI
properties.

This SSID is important information for ASoC components that need to apply
hardware-specific configuration on PCI-based systems.

As the SSID is a generic part of the PCI specification and is treated as
identifying the "soundcard", it is reasonable to include this information
in struct snd_soc_card, instead of components inventing their own custom
ways to pass this information around.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Merge up fixes

For the benefit of CI.

ASoC: rsnd: remove unneeded of_node_put()

The loop is not using "node", of_node_put(node) is not needed.

Cc: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8734zlilmd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

SM6115 TX Macro

Merge series from Konrad Dybcio <konrad.dybcio@linaro.org>:

Like most Qualcomm SoCs, SM6115 has a TX Macro.

Only some minor changes were required.

ASoC: amd: yc: Fix non-functional mic on Lenovo 82QF and 82UG

Like the Lenovo 82TL and 82V2, the Lenovo 82QF (Yoga 7 14ARB7) and 82UG
(Legion S7 16ARHA7) both need a quirk entry for the internal microphone to
function. Commit c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on
Lenovo 82SJ") restricted the quirk that previously matched "82" to "82V2",
breaking microphone functionality on these devices. Fix this by adding
specific quirks for these models, as was done for the Lenovo 82TL.

Fixes: c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ")
Closes: https://github.com/tomsom/yoga-linux/issues/51
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208555#c780
Cc: stable@vger.kernel.org
Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/20230911213409.6106-1-git@augustwikerfors.se
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Update jh7110 PWM DAC for ops move

For some reason the JH7110 PWM DAC driver made it through build testing
in spite of not being updated for the move of probe() to the ops struct.
Make the required update.

Signed-off-by: Mark Brown <broonie@kernel.org>

Match data improvements for wm8580 driver

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add match data improvements for wm8580 driver.

This patch series is only compile tested.

ASoC: Convert some Maxim codecs to use GPIO

Merge series from Linus Walleij <linus.walleij@linaro.org>:

The Maxim devices are pretty straight-forward to convert
over to use GPIO descriptors, so let's do it.

Match data improvements for tlv320aic32x4 driver

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add match data improvements for tlv320aic32x4
driver.

This patch series is only compile tested.

ASoC: Convert some Maxim codecs to use GPIO

Merge series from Linus Walleij <linus.walleij@linaro.org>:

The Maxim devices are pretty straight-forward to convert
over to use GPIO descriptors, so let's do it.

ASoC: mt8188-mt6359: add SOF support

Merge series from Trevor Wu <trevor.wu@mediatek.com>:

This series introduces dynamic pinctrl and adds support for the SOF on
the mt8188-mt6359 machine driver.

Match data improvements for ak4642 driver

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add match data improvements for ak4642 driver.

This patch series is only compile tested.

ASoC: amd: acp: Add sound support for a line of

Merge series from Marian Postevca <posteuca@mutex.one>:

This series adds support for a line of HUAWEI laptops with
AMD CPUs that connect using the ACP3x module to a ES8336 CODEC.

The CODEC driver must be extended to support the S32 LE format
and the MCLK div by 2 option. MCLK div by 2 is needed for one specific
SKU, which uses a 48Mhz MCLK, which seems to be too high of a frequency
for the CODEC and must be divided by 2.

The acp legacy driver must also be extended by using callbacks so that
the more complicated handling of this specific CODEC can be moved
outside the more generic ACP code.

Improve CS35l41-based audio codec drivers

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

This patch series contains several fixes and improvements to drivers
based on the CS35l41 audio codec.

It has been verified on Valve's Steam Deck, except the HDA related patches.

Add PWM-DAC audio support for StarFive JH7110

Merge series from Hal Feng <hal.feng@starfivetech.com>:

This patchset adds PWM-DAC audio support for the StarFive JH7110 SoC.
The PWM-DAC module does not require a hardware codec, but a dummy codec is
needed for the driver. The dummy spdif codec driver, which is already
upstream, is compatible with the one which JH7110 PWM-DAC needed. So we
use it as the dummy codec driver for the JH7110 PWM-DAC module.

Fix redundant PLLA update

Merge series from Sameer Pujar <spujar@nvidia.com>:

This small series fixes redundant PLLA updates that happen for
each DAI link in the audio path. This helps to resolve DMIC clock
issue seen on Jetson TX2 platform.

ASoC: fsl: imx-pcm-rpmsg: Add SNDRV_PCM_INFO_BATCH flag

The rpmsg pcm device is a device which should support
double buffering.

Found this issue with pipewire. When there is no
SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will
set headroom to be zero, and because rpmsg pcm device
don't support residue report, when the latency setting
is small, the "delay" always larger than "target" in
alsa-pcm.c, that reading next period data is not
scheduled on time.

With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire
will select a smaller period size for device, then
the task of reading next period data will be scheduled
on time.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1694414287-13291-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda: cs35l41: Consistently use dev_err_probe()

Replace the remaining dev_err() calls in probe() with dev_err_probe(),
to improve consistency.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-12-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda: cs35l41: Undo runtime PM changes at driver exit time

According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.

Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().

Fixes: 1873ebd30cc8 ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-11-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda: cs35l41: Fix unbalanced pm_runtime_get()

If component_add() fails, probe() returns without calling
pm_runtime_put(), which leaves the runtime PM usage counter incremented.

Fix the issue by jumping to err_pm label and drop the now unnecessary
pm_runtime_disable() call.

Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-10-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Use modern pm_ops

Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to
conditionally export the runtime/system PM functions.

Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS()
helpers with their modern alternatives and get rid of the now
unnecessary '__maybe_unused' annotations on all PM functions.

Additionally, use the pm_ptr() macro to fix the following errors when
building with CONFIG_PM disabled:

ERROR: modpost: "cs35l41_pm_ops" [sound/soc/codecs/snd-soc-cs35l41-spi.ko] undefined!
ERROR: modpost: "cs35l41_pm_ops" [sound/soc/codecs/snd-soc-cs35l41-i2c.ko] undefined!

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-9-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Make use of dev_err_probe()

Use dev_err_probe() helper where possible, to simplify error handling
during probe.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-8-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Undo runtime PM changes at driver exit time

According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.

Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().

Note this would have been handled implicitly by
devm_pm_runtime_enable(), but there is a need to continue using
pm_runtime_enable()/pm_runtime_disable() in order to ensure the runtime
PM is disabled as soon as the remove() callback is entered.

Fixes: f517ba4924ad ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Verify PM runtime resume errors in IRQ handler

The interrupt handler invokes pm_runtime_get_sync() without checking the
returned error code.

Add a proper verification and switch to pm_runtime_resume_and_get(), to
avoid the need to call pm_runtime_put_noidle() for decrementing the PM
usage counter before returning from the error condition.

Fixes: f517ba4924ad ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Fix broken shared boost activation

Enabling the active/passive shared boosts requires setting SYNC_EN, but
*not* before receiving the PLL Lock signal.

Due to improper error handling, it was not obvious that waiting for the
completion operation times out and, consequently, the shared boost is
never activated.

Further investigations revealed the signal is triggered while
snd_pcm_start() is executed, right after receiving the
SNDRV_PCM_TRIGGER_START command, which happens long after the
SND_SOC_DAPM_PRE_PMU event handler is invoked as part of
snd_pcm_prepare().  That is where cs35l41_global_enable() is called
from.

Increasing the wait duration doesn't help, as it only causes an
unnecessary delay in the invocation of snd_pcm_start().  Moving the wait
and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START
callback is not a solution either, since they would be executed in an
IRQ-off atomic context.

Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right
after receiving the PLL Lock interrupt.

Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of
the original mdsync_up_seq, which would have toggled GLOBAL_EN with
unwanted consequences on PLL locking behavior.

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Initialize completion object before requesting IRQ

Technically, an interrupt handler can be called before probe() finishes
its execution, hence ensure the pll_lock completion object is always
initialized before being accessed in cs35l41_irq().

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Handle mdsync_up reg write errors

The return code of regmap_multi_reg_write() call related to "MDSYNC up"
sequence is shadowed by the subsequent regmap_read_poll_timeout()
invocation, which will hit a timeout in case the write operation above
fails.

Make sure cs35l41_global_enable() returns the correct error code instead
of -ETIMEDOUT.

Additionally, to be able to distinguish between the timeouts of
wait_for_completion_timeout() and regmap_read_poll_timeout(), print an
error message for the former and return immediately.  This also avoids
having to wait unnecessarily for the second time.

Fixes: f8264c759208 ("ALSA: cs35l41: Poll for Power Up/Down rather than waiting a fixed delay")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Handle mdsync_down reg write errors

The return code of regmap_multi_reg_write() call related to "MDSYNC
down" sequence is shadowed by the subsequent
wait_for_completion_timeout() invocation, which is expected to time
timeout in case the write operation failed.

Let cs35l41_global_enable() return the correct error code instead of
-ETIMEDOUT.

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98927: Drop pointless includes

This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-7-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98520: Drop pointless includes

This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-6-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98396: Drop pointless include

This driver is already using solely GPIO descriptors and
do not need to include the legacy header <linux/gpio.h>.
Drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-5-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98388: Correct the includes

The MAX98388 driver is using the modern GPIO descriptor API
but uses legacy includes. Include the proper <linux/consumer.h>
header instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-4-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98373: Convert to use GPIO descriptors

Instead of relying on legacy interfaces, convert the driver to
use GPIO descriptors. This is a straight-forward conversion,
we support also sdw devices providing GPIO descriptor tables
if they so desire.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-3-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98357a: Drop pointless include

This driver is already using solely GPIO descriptors and
do not need to include the legacy header <linux/gpio.h>.
Drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-2-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9768: Convert to use GPIO descriptors

The MAX9768 is pretty straight forward to convert to GPIO
descriptors.

To name the GPIO properties, I looke at the bindings in
maxim,max9759.yaml which names these GPIO "mute" and
"shutdown" respectively.

No board files using platform data exist in the kernel, new
users can use GPIO descriptor tables if desired.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-1-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: starfive: Add JH7110 PWM-DAC driver

Add PWM-DAC driver support for the StarFive JH7110 SoC.

Reviewed-by: Walker Chen <walker.chen@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230814080618.10036-3-hal.feng@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: Add StarFive JH7110 PWM-DAC controller

Add bindings for the PWM-DAC controller on the JH7110
RISC-V SoC by StarFive Ltd.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230814080618.10036-2-hal.feng@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas571x: Simplify probe()

Simplify probe() by replacing of_match_device->i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230827091525.39263-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l45: Add AMP Enable Switch control

The "AMP Enable Switch" is useful in systems with multiple
amplifiers connected to the same audio bus
but not all of them are needed for all use cases.

Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-4-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l45: Connect DSP to the monitoring signals

Link VMON, IMON, TEMPMON, VDD_BSTMON and VDD_BATTMON
to DSP1. The CSPL firmware uses them for the speaker calibration
and monitoring.

Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-3-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l45: Analog PCM Volume and Amplifier Mode controls

Adds "Analog PCM Volume" control with supported values
0 = 10dB,1 = 13dB,2 = 16dB and 3 = 19dB.
The amplifier can operate either in Speaker Mode or Receiver Mode
as configured by the user. Speaker Mode has four gain options
to support maximum amplifier output amplitude for loud
speaker application. Receiver Mode has further optimized
noise performance while maintaining sufficient output to support
phone receiver application. While configured in Receiver Mode,
the analog PCM Volume control is disabled and
the analog gain is fixed to 1dB.

Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-2-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l45: Checks index of cs35l45_irqs[]

Checks the index computed by the virq offset before printing the
error condition in cs35l45_spk_safe_err() handler.

Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs42xx8-i2c: Simplify probe()

Simplify probe() by replacing of_match_device->i2c_get_match_data() and
extend matching support for ID table. Also replace
dev_err()->dev_err_probe() to simplify the code.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230828174856.122559-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8580: Simplify probe()

Simplify probe() by replacing of_match_device->i2c_get_match_data() and
extend matching support for ID table.

While at it, remove comma in the terminator entry and simplify probe()
by replacing dev_err->dev_err_probe().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230828174019.119250-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: axg: extend TDM maximum sample rate to 384kHz

The TDM HW on the axg SoC families and derivatives actually supports
384kHz sampling rate.

Update the fifo and tdm interface constraints accordingly.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230907090910.13546-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc.h: replace custom COUNT_ARGS() & CONCATENATE() implementations

Replace custom implementation of the macros from args.h.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230904111524.1740930-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: acp: Add machine driver that enables sound for systems with a ES8336 codec

This commit enables sound for a line of Huawei laptops that use
the ES8336 codec which is connected to the ACP3X module.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-6-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: acp: Add support for splitting the codec specific code from the ACP driver

This commit adds support for splitting more complicated machine
drivers, that need special handling, from the generic ACP code.

By adding support for callbacks to configure and handle codec
specific implementation details, we can split them in separate
files that don't clutter the ACP code.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-5-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: es8316: Enable support for MCLK div by 2

To properly support a line of Huawei laptops with an AMD CPU
and an ES8336 codec connected to the ACP3X module, we need
to enable the codec option to divide the MCLK by 2.
This is needed because for at least one SKU that has a 48Mhz
MCLK the sound is distorted unless the MCLK div by 2 option
is enabled.

The option to divide the MCLK will first be tried. If no suitable
clocking can be generated from this frequency, then the normal
non-halved MCLK frequency will be tried.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-4-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: es8316: Replace NR_SUPPORTED_MCLK_LRCK_RATIOS with ARRAY_SIZE()

No need for a special define since we can use ARRAY_SIZE() directly,
and won't need to worry to keep it in sync.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-3-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: es8316: Enable support for S32 LE format

This CODEC does support the S32 LE format in es8316_pcm_hw_params(),
but doesn't have it enabled in ES8316_FORMATS. Enable it so that we
have more options to match with components.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-2-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: lpass-tx-macro: Add SM6115 support

SM6115 has a TX macro, which surprisingly doesn't host a SWR master.
Conditionally skip the SWR reset sequence on this platform.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230825-topic-6115tx-v1-2-ebed201ad54b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM6115

SM6115 has a TX Macro, requiring an NPL clock, but not DCODEC.
Document it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230825-topic-6115tx-v1-1-ebed201ad54b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ak4642: Simplify probe()

Simpilfy probe() by replacing of_device_get_match_data() and id lookup for
retrieving match data by i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230831204734.104954-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ak4642: Minor cleanups in probe()

Some minor cleanups:
 Replace local variable np with dev_fwnode()
 Replace dev_err()->dev_err_probe().
 Remove comma in the terminator entry for OF table.
 Drop a space in the terminator entry for ID table.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230831204734.104954-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add DMI ID for MSI Bravo 15 B7ED

Signed-off-by: Walt Holman <waltholman09@gmail.com>
Link: https://lore.kernel.org/r/20230910185433.13677-1-waltholman09@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: Shrink stack frame for __soc_pcm_hw_params

Commit ac950278b087 ("ASoC: add N cpus to M codecs dai link support")
added an additional local params in __soc_pcm_hw_params, for the CPU
side of the DAI. The snd_pcm_hw_params struct is pretty large (604
bytes) and keeping two local copies of it can make the stack frame
really large.

It is worth noting the variables are in separate code blocks so for
some optimisation levels in the compiler these will get automatically
combined keeping the stack frame reasonable. But better to manually
combine them to cover all cases.

Add a single local variable for __soc_pcm_hw_params and use in both
loops to shrink the stack frame.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908085920.2906359-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8960: Fix error handling in probe

Commit 422f10adc3eb ("ASoC: wm8960: Add support for the power supplies")
added regulator support to the wm8960 driver, but neglected to update
error handling in the probe function. This results in warning backtraces
if the probe function fails.

Fixes: 422f10adc3eb ("ASoC: wm8960: Add support for the power supplies")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230909120237.2646275-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: add missing of_node_put

for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.

This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230907095521.14053-11-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: spdifin: start hw on dai probe

For spdif input to report the locked rate correctly, even when no capture
is running, the HW and reference clock must be started as soon as
the dai is probed.

Fixes: 5ce5658375e6 ("ASoC: meson: add axg spdif input")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230907090504.12700-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l56: Call pm_runtime_dont_use_autosuspend()

Driver remove() must call pm_runtime_dont_use_autosuspend().

Drivers that call pm_runtime_use_autosuspend() must disable
it in driver remove(). Unfortunately until recently this was
only mentioned in 1 line in a 900+ line document so most
people hadn't noticed this. It has only recently been added
to the kerneldoc of pm_runtime_use_autosuspend().

THIS WON'T APPLY CLEANLY TO V6.5 AND EARLIER:
We will send a separate backported patch to stable.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908101716.2658582-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: Fix redundant PLLA and PLLA_OUT0 updates

Tegra audio graph card has many DAI links which connects internal
AHUB modules and external audio codecs. Since these are DPCM links,
hw_params() call in the machine driver happens for each connected
BE link and PLLA is updated every time. This is not really needed
for all links as only I/O link DAIs derive respective clocks from
PLLA_OUT0 and thus from PLLA. Hence add checks to limit the clock
updates to DAIs over I/O links.

This found to be fixing a DMIC clock discrepancy which is suspected
to happen because of back to back quick PLLA and PLLA_OUT0 rate
updates. This was observed on Jetson TX2 platform where DMIC clock
ended up with unexpected value.

Fixes: 202e2f774543 ("ASoC: tegra: Add audio graph based card driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1694098945-32760-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-utils: Export snd_soc_dai_is_dummy() symbol

Export symbol snd_soc_dai_is_dummy() for usage outside core driver
modules. This is required by Tegra ASoC machine driver.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1694098945-32760-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8580: Move OF table

Move OF table near to the user.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230901065952.18760-4-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8580: Remove trailing comma in the terminator entry

Remove trailing comma in the terminator entry for OF table.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230901065952.18760-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8580: Simplify probe()

Simplify probe() by replacing of_match_device->i2c_get_match_data()
and extend matching support for ID table.

While at it, remove comma in the terminator entry and simplify probe()
by replacing dev_err()->dev_err_probe().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230901065952.18760-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98927: Drop pointless includes

This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-7-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98520: Drop pointless includes

This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-6-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98396: Drop pointless include

This driver is already using solely GPIO descriptors and
do not need to include the legacy header <linux/gpio.h>.
Drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-5-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98388: Correct the includes

The MAX98388 driver is using the modern GPIO descriptor API
but uses legacy includes. Include the proper <linux/consumer.h>
header instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-4-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98373: Convert to use GPIO descriptors

Instead of relying on legacy interfaces, convert the driver to
use GPIO descriptors. This is a straight-forward conversion,
we support also sdw devices providing GPIO descriptor tables
if they so desire.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-3-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98357a: Drop pointless include

This driver is already using solely GPIO descriptors and
do not need to include the legacy header <linux/gpio.h>.
Drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-2-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9768: Convert to use GPIO descriptors

The MAX9768 is pretty straight forward to convert to GPIO
descriptors.

To name the GPIO properties, I looke at the bindings in
maxim,max9759.yaml which names these GPIO "mute" and
"shutdown" respectively.

No board files using platform data exist in the kernel, new
users can use GPIO descriptor tables if desired.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-1-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320aic32x4-spi: Simplify probe()

Simplify probe() by replacing of_match_node() and spi_get_device_id() with
spi_get_device_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230831194622.87653-4-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>