git.maquefel.me Git - linux.git/log

f2fs: finish previous checkpoints before returning from remount

Flush remaining checkpoint requests at the end of remount, since a new
checkpoint would be triggered while remount and we need to take care of
it before returning from remount, in order to avoid the below race
condition.

  - Thread                          - checkpoint thread
  do_remount()
   down_write(&sb->s_umount);
   f2fs_remount()
    f2fs_disable_checkpoint(sbi) -> add checkpoints to the list
                                    block_operations()
                                     down_read_trylock(&sb->s_umount) = 0
   up_write(&sb->s_umount);
                                     f2fs_quota_sync()
                                      dquot_writeback_dquots()
                                       WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix error handling of __get_node_page

Use f2fs_handle_error to record inconsistent node block error
and return -EFSCORRUPTED instead of -EINVAL.

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: do not return EFSCORRUPTED, but try to run online repair

If we return the error, there's no way to recover the status as of now, since
fsck does not fix the xattr boundary issue.

Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix error path of __f2fs_build_free_nids

If NAT is corrupted, let scan_nat_page() return EFSCORRUPTED, so that,
caller can set SBI_NEED_FSCK flag into checkpoint for later repair by
fsck.

Also, this patch introduces a new fscorrupted error flag, and in above
scenario, it will persist the error flag into superblock synchronously
to avoid it has no luck to trigger a checkpoint to record SBI_NEED_FSCK

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: Clean up errors in segment.h

Fix the following errors reported by checkpatch:

ERROR: spaces required around that ':' (ctx:VxW)

Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: clean up zones when not successfully unmounted

We can't trust write pointers when the previous mount was not
successfully unmounted.

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: let f2fs_precache_extents() traverses in file range

Rather than in range of [0, max_file_blocks()), since data after EOF
is alwasy zero, it's unnecessary to preload mapping info of the data.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: avoid format-overflow warning

With gcc and W=1 option, there's a warning like this:

fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’:
fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between
1 and 7 bytes into a region of size between 5 and 8
[-Werror=format-overflow=]
1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev),
MINOR(dev));
| ^~

String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up
to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35".
slab_name's size should be 35 rather than 32.

Cc: stable@vger.kernel.org
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()

Otherwise, it may print random physical block address in tracepoint
of f2fs_map_blocks() as below:

f2fs_map_blocks: dev = (253,16), ino = 2297, file offset = 0, start blkaddr = 0xa356c421, len = 0x0, flags = 0

Fixes: c4020b2da4c9 ("f2fs: support F2FS_IOC_PRECACHE_EXTENTS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: Support Block Size == Page Size

This allows f2fs to support cases where the block size = page size for
both 4K and 16K block sizes. Other sizes should work as well, should the
need arise. This does not currently support 4K Block size filesystems if
the page size is 16K.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: stop iterating f2fs_map_block if hole exists

Let's avoid unnecessary f2fs_map_block calls to load extents.

# f2fs_io fadvise willneed 0 4096 /data/local/tmp/test

  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 386, start blkaddr = 0x34ac00, len = 0x1400, flags = 2,
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 5506, start blkaddr = 0x34c200, len = 0x1000, flags = 2,
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 9602, start blkaddr = 0x34d600, len = 0x1200, flags = 2,
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 14210, start blkaddr = 0x34ec00, len = 0x400, flags = 2,
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 15235, start blkaddr = 0x34f401, len = 0xbff, flags = 2,
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 18306, start blkaddr = 0x350200, len = 0x1200, flags = 2
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 22915, start blkaddr = 0x351601, len = 0xa7d, flags = 2
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25600, start blkaddr = 0x351601, len = 0x0, flags = 0
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25601, start blkaddr = 0x351601, len = 0x0, flags = 0
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 25602, start blkaddr = 0x351601, len = 0x0, flags = 0
  ...
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1037188, start blkaddr = 0x351601, len = 0x0, flags = 0
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1038206, start blkaddr = 0x351601, len = 0x0, flags = 0
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 1039224, start blkaddr = 0x351601, len = 0x0, flags = 0
  f2fs_map_blocks: dev = (254,51), ino = 85845, file offset = 2075548, start blkaddr = 0x351601, len = 0x0, flags = 0

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: preload extent_cache for POSIX_FADV_WILLNEED

This patch tries to preload extent_cache given POSIX_FADV_WILLNEED, which is
more useful for generic usecases.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: set the default compress_level on ioctl

Otherwise, we'll get a broken inode.

# touch $FILE
# f2fs_io setflags compression $FILE
# f2fs_io set_coption 2 8 $FILE

[ 112.227612] F2FS-fs (dm-51): sanity_check_compress_inode: inode (ino=8d3fe) has unsupported compress level: 0, run fsck to fix

Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()

If file has both cold and compress flag, during f2fs_ioc_compress_file(),
f2fs will trigger IPU for non-compress cluster and OPU for compress
cluster, so that, data of the file may be fragmented.

Fix it by always triggering OPU for IOs from user mode compression.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to drop meta_inode's page cache in f2fs_put_super()

syzbot reports a kernel bug as below:

F2FS-fs (loop1): detect filesystem reference count leak during umount, type: 10, count: 1
kernel BUG at fs/f2fs/super.c:1639!
CPU: 0 PID: 15451 Comm: syz-executor.1 Not tainted 6.5.0-syzkaller-09338-ge0152e7481c6 #0
RIP: 0010:f2fs_put_super+0xce1/0xed0 fs/f2fs/super.c:1639
Call Trace:
generic_shutdown_super+0x161/0x3c0 fs/super.c:693
kill_block_super+0x3b/0x70 fs/super.c:1646
kill_f2fs_super+0x2b7/0x3d0 fs/f2fs/super.c:4879
deactivate_locked_super+0x9a/0x170 fs/super.c:481
deactivate_super+0xde/0x100 fs/super.c:514
cleanup_mnt+0x222/0x3d0 fs/namespace.c:1254
task_work_run+0x14d/0x240 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x60 kernel/entry/common.c:296
do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd

In f2fs_put_super(), it tries to do sanity check on dirty and IO
reference count of f2fs, once there is any reference count leak,
it will trigger panic.

The root case is, during f2fs_put_super(), if there is any IO error
in f2fs_wait_on_all_pages(), we missed to truncate meta_inode's page
cache later, result in panic, fix this case.

Fixes: 20872584b8c0 ("f2fs: fix to drop all dirty meta/node pages during umount()")
Reported-by: syzbot+ebd7072191e2eddd7d6e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000a14f020604a62a98@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: split initial and dynamic conditions for extent_cache

Let's allocate the extent_cache tree without dynamic conditions to avoid a
missing condition causing a panic as below.

# create a file w/ a compressed flag
# disable the compression
# panic while updating extent_cache

F2FS-fs (dm-64): Swapfile: last extent is not aligned to section
F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N)
Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
Write of size 4 at addr 0000000000000030 by task syz-executor154/3327

CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1
Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023
Call Trace:
__dump_stack out/common/lib/dump_stack.c:77 [inline]
dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118
__kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415
kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428
kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186
__kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37
instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline]
atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline]
queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline]
__raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline]
_raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295
__drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155
f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172
f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline]
f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764
vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310
ksys_fallocate out/common/fs/open.c:333 [inline]
__do_sys_fallocate out/common/fs/open.c:341 [inline]
__se_sys_fallocate out/common/fs/open.c:339 [inline]
__x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339
do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46

Cc: stable@vger.kernel.org
Fixes: 72840cccc0a1 ("f2fs: allocate the extent_cache by default")
Reported-and-tested-by: syzbot+d342e330a37b48c094b7@syzkaller.appspotmail.com
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: compress: fix to avoid redundant compress extension

With below script, redundant compress extension will be parsed and added
by parse_options(), because parse_options() doesn't check whether the
extension is existed or not, fix it.

1. mount -t f2fs -o compress_extension=so /dev/vdb /mnt/f2fs
2. mount -t f2fs -o remount,compress_extension=so /mnt/f2fs
3. mount|grep f2fs

/dev/vdb on /mnt/f2fs type f2fs (...,compress_extension=so,compress_extension=so,...)

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 151b1982be5d ("f2fs: compress: add nocompress extensions support")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: compress: do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on

This patch covers sanity check logic on cluster w/ CONFIG_F2FS_CHECK_FS,
otherwise, there will be performance regression while querying cluster
mapping info.

Callers of f2fs_is_compressed_cluster() only care about whether cluster
is compressed or not, rather than # of valid blocks in compressed cluster,
so, let's adjust f2fs_is_compressed_cluster()'s logic according to
caller's requirement.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: compress: fix to avoid use-after-free on dic

Call trace:
__memcpy+0x128/0x250
f2fs_read_multi_pages+0x940/0xf7c
f2fs_mpage_readpages+0x5a8/0x624
f2fs_readahead+0x5c/0x110
page_cache_ra_unbounded+0x1b8/0x590
do_sync_mmap_readahead+0x1dc/0x2e4
filemap_fault+0x254/0xa8c
f2fs_filemap_fault+0x2c/0x104
__do_fault+0x7c/0x238
do_handle_mm_fault+0x11bc/0x2d14
do_mem_abort+0x3a8/0x1004
el0_da+0x3c/0xa0
el0t_64_sync_handler+0xc4/0xec
el0t_64_sync+0x1b4/0x1b8

In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if
we hit cached page in compress_inode's cache, dic may be released, it needs
break the loop rather than continuing it, in order to avoid accessing
invalid dic pointer.

Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: compress: fix deadloop in f2fs_write_cache_pages()

With below mount option and testcase, it hangs kernel.

1. mount -t f2fs -o compress_log_size=5 /dev/vdb /mnt/f2fs
2. touch /mnt/f2fs/file
3. chattr +c /mnt/f2fs/file
4. dd if=/dev/zero of=/mnt/f2fs/file bs=1MB count=1
5. sync
6. dd if=/dev/zero of=/mnt/f2fs/file bs=111 count=11 conv=notrunc
7. sync

INFO: task sync:4788 blocked for more than 120 seconds.
Not tainted 6.5.0-rc1+ #322
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:sync state:D stack:0 pid:4788 ppid:509 flags:0x00000002
Call Trace:
<TASK>
__schedule+0x335/0xf80
schedule+0x6f/0xf0
wb_wait_for_completion+0x5e/0x90
sync_inodes_sb+0xd8/0x2a0
sync_inodes_one_sb+0x1d/0x30
iterate_supers+0x99/0xf0
ksys_sync+0x46/0xb0
__do_sys_sync+0x12/0x20
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

The reason is f2fs_all_cluster_page_ready() assumes that pages array should
cover at least one cluster, otherwise, it will always return false, result
in deadloop.

By default, pages array size is 16, and it can cover the case cluster_size
is equal or less than 16, for the case cluster_size is larger than 16, let's
allocate memory of pages array dynamically.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Merge tag 'for-6.6-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- several fixes for handling directory item (inserting, removing,
   iteration, error handling)

- fix transaction commit stalls when auto relocation is running and
   blocks other tasks that want to commit

- fix a build error when DEBUG is enabled

- fix lockdep warning in inode number lookup ioctl

- fix race when finishing block group creation

- remove link to obsolete wiki in several files

* tag 'for-6.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  MAINTAINERS: remove links to obsolete btrfs.wiki.kernel.org
  btrfs: assert delayed node locked when removing delayed item
  btrfs: remove BUG() after failure to insert delayed dir index item
  btrfs: improve error message after failure to add delayed dir index item
  btrfs: fix a compilation error if DEBUG is defined in btree_dirty_folio
  btrfs: check for BTRFS_FS_ERROR in pending ordered assert
  btrfs: fix lockdep splat and potential deadlock after failure running delayed items
  btrfs: do not block starts waiting on previous transaction commit
  btrfs: release path before inode lookup during the ino lookup ioctl
  btrfs: fix race between finishing block group creation and its item update

Merge tag 'platform-drivers-x86-v6.6-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

- various platform/mellanox fixes

- one new DMI quirk for asus-wmi

* tag 'platform-drivers-x86-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode
  platform/mellanox: NVSW_SN2201 should depend on ACPI
  platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig
  platform/mellanox: mlxbf-pmc: Fix reading of unprogrammed events
  platform/mellanox: mlxbf-pmc: Fix potential buffer overflows
  platform/mellanox: mlxbf-tmfifo: Drop jumbo frames
  platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors

Merge tag 'linux-kselftest-next-6.6-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

- kselftest runner script to propagate SIGTERM to runner child
   to avoid kselftest hang

- install symlinks required for test execution to avoid test
   failures

- kselftest dependency checker script argument parsing

* tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: Keep symlinks, when possible
  selftests: fix dependency checker script
  kselftest/runner.sh: Propagate SIGTERM to runner child
  selftests/ftrace: Correctly enable event in instance-event.tc

Merge tag 'linux-kselftest-kunit-6.6-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan:
"Fixes to possible memory leak, null-ptr-deref, wild-memory-access, and
  error path bugs"

* tag 'linux-kselftest-kunit-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: Fix possible memory leak in kunit_filter_suites()
  kunit: Fix possible null-ptr-deref in kunit_parse_glob_filter()
  kunit: Fix the wrong err path and add goto labels in kunit_filter_suites()
  kunit: Fix wild-memory-access bug in kunit_free_suite_set()
  kunit: test: Make filter strings in executor_test writable

Merge tag 'ovl-fixes-6.6-rc2' of git://git./linux/kernel/git/overlayfs/vfs

Pull overlayfs fixes from Amir Goldstein:
"Two fixes for pretty old regressions"

* tag 'ovl-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix incorrect fdput() on aio completion
ovl: fix failed copyup of fileattr on a symlink

platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode

Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: NVSW_SN2201 should depend on ACPI

The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table. Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.

Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig

The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-pmc: Fix reading of unprogrammed events

This fix involves 2 changes:
- All event regs have a reset value of 0, which is not a valid
   event_number as per the event_list for most blocks and hence seen
   as an error. Add a "disable" event with event_number 0 for all blocks.

- The enable bit for each counter need not be checked before
   reading the event info, and hence removed.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/04d0213932d32681de1c716b54320ed894e52425.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-pmc: Fix potential buffer overflows

Replace sprintf with sysfs_emit where possible.
Size check in mlxbf_pmc_event_list_show should account for "\0".

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/bef39ef32319a31b32f999065911f61b0d3b17c3.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-tmfifo: Drop jumbo frames

This commit drops over-sized network packets to avoid tmfifo
queue stuck.

Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/9318936c2447f76db475c985ca6d91f057efcd41.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors

This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.

Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Linux 6.6-rc1

Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm

Pull drm ci scripts from Dave Airlie:
"This is a bunch of ci integration for the freedesktop gitlab instance
  where we currently do upstream userspace testing on diverse sets of
  GPU hardware. From my perspective I think it's an experiment worth
  going with and seeing how the benefits/noise playout keeping these
  files useful.

  Ideally I'd like to get this so we can do pre-merge testing on PRs
  eventually.

  Below is some info from danvet on why we've ended up making the
  decision and how we can roll it back if we decide it was a bad plan.

  Why in upstream?

   - like documentation, testcases, tools CI integration is one of these
     things where you can waste endless amounts of time if you
     accidentally have a version that doesn't match your source code

   - but also like the above, there's a balance, this is the initial cut
     of what we think makes sense to keep in sync vs out-of-tree,
     probably needs adjustment

   - gitlab supports out-of-repo gitlab integration and that's what's
     been used for the kernel in drm, but it results in per-driver
     fragmentation and lots of duplicated effort. the simple act of
     smashing an arbitrary winner into a topic branch already started
     surfacing patches on dri-devel and sparking good cross driver team
     discussions

  Why gitlab?

   - it's not any more shit than any of the other CI

   - drm userspace uses it extensively for everything in userspace, we
     have a lot of people and experience with this, including
     integration of hw testing labs

   - media userspace like gstreamer is also on gitlab.fd.o, and there's
     discussion to extend this to the media subsystem in some fashion

  Can this be shared?

   - there's definitely a pile of code that could move to scripts/ if
     other subsystem adopt ci integration in upstream kernel git. other
     bits are more drm/gpu specific like the igt-gpu-tests/tools
     integration

   - docker images can be run locally or in other CI runners

  Will we regret this?

   - it's all in one directory, intentionally, for easy deletion

   - probably 1-2 years in upstream to see whether this is worth it or a
     Big Mistake. that's roughly what it took to _really_ roll out solid
     CI in the bigger userspace projects we have on gitlab.fd.o like
     mesa3d"

* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
  drm: ci: docs: fix build warning - add missing escape
  drm: Add initial ci/ subdirectory

Merge tag 'x86-urgent-2023-09-10' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Fix preemption delays in the SGX code, remove unnecessarily
  UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
  make the x86 SMP init code a bit more conservative to fix kexec()
  lockups"

* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
  x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
  x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
  x86/smp: Don't send INIT to non-present and non-booted CPUs

Merge tag 'perf-urgent-2023-09-10' of git://git./linux/kernel/git/tip/tip

Pull x86 perf event fix from Ingo Molnar:
"Work around a firmware bug in the uncore PMU driver, affecting certain
Intel systems"

* tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Correct the number of CHAs on EMR

Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:

   - Add git information for perf-tools and perf-tools-next trees and
     branches to the MAINTAINERS file. That is where development now
     takes place and myself and Namhyung Kim have write access, more
     people to come as we emulate other maintainer groups.

  perf record:

   - Record kernel data maps when 'perf record --data' is used, so that
     global variables can be resolved and used in tools that do data
     profiling.

  perf trace:

   - Remove the old, experimental support for BPF events in which a .c
     file was passed as an event: "perf trace -e hello.c" to then get
     compiled and loaded.

     The only known usage for that, that shipped with the kernel as an
     example for such events, augmented the raw_syscalls tracepoints and
     was converted to a libbpf skeleton, reusing all the user space
     components and the BPF code connected to the syscalls.

     In the end just the way to glue the BPF part and the user space
     type beautifiers changed, now being performed by libbpf skeletons.

     The next step is to use BTF to do pretty printing of all syscall
     types, as discussed with Alan Maguire and others.

     Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
     path/filenames/strings, some of the networking data structures,
     perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
     and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
     seconds:

      # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
         0.000 (   9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
         9.039 (   0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
             ? (           ): gpm/991  ... [continued]: clock_nanosleep())               = 0
        10.133 (           ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
             ? (           ): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
        30.276 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
       223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
        30.276 (2000.394 ms): gpm/991  ... [continued]: clock_nanosleep())               = 0
      1230.814 (           ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
      1230.814 (1000.404 ms): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
      2030.886 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
      2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
             ? (           ): crond/1172  ... [continued]: clock_nanosleep())            = 0
      3242.699 (           ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
      2030.886 (2000.385 ms): gpm/991  ... [continued]: clock_nanosleep())               = 0
      3728.078 (           ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
      3242.699 (1000.158 ms): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
      4031.409 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
        10.133 (5000.375 ms): sleep/327642  ... [continued]: clock_nanosleep())          = 0

      Performance counter stats for 'sleep 5':

             2,617,347      cycles
             1,855,997      instructions                     #    0.71  insn per cycle

           5.002282128 seconds time elapsed

           0.000855000 seconds user
           0.000852000 seconds sys

  perf annotate:

   - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
     for licensing reasons, and we missed a build test on
     tools/perf/tests makefile.

     Since we now default to NDEBUG=1, we ended up segfaulting when
     building with BUILD_NONDISTRO=1 because a needed initialization
     routine was being "error checked" via an assert.

     Fix it by explicitly checking the result and aborting instead if it
     fails.

     We better back propagate the error, but at least 'perf annotate' on
     samples collected for a BPF program is back working when perf is
     built with BUILD_NONDISTRO=1.

  perf report/top:

   - Add back TUI hierarchy mode header, that is seen when using 'perf
     report/top --hierarchy'.

   - Fix the number of entries for 'e' key in the TUI that was
     preventing navigation of lines when expanding an entry.

  perf report/script:

   - Support cross platform register handling, allowing a perf.data file
     collected on one architecture to have registers sampled correctly
     displayed when analysis tools such as 'perf report' and 'perf
     script' are used on a different architecture.

   - Fix handling of event attributes in pipe mode, i.e. when one uses:

   perf record -o - | perf report -i -

     When no perf.data files are used.

   - Handle files generated via pipe mode with a version of perf and
     then read also via pipe mode with a different version of perf,
     where the event attr record may have changed, use the record size
     field to properly support this version mismatch.

  perf probe:

   - Accessing global variables from uprobes isn't supported, make the
     error message state that instead of stating that some minimal
     kernel version is needed to have that feature. This seems just a
     tool limitation, the kernel probably has all that is needed.

  perf tests:

   - Fix a reference count related leak in the dlfilter v0 API where the
     result of a thread__find_symbol_fb() is not matched with an
     addr_location__exit() to drop the reference counts of the resolved
     components (machine, thread, map, symbol, etc). Add a dlfilter test
     to make sure that doesn't regresses.

   - Lots of fixes for the 'perf test' written in shell script related
     to problems found with the shellcheck utility.

   - Fixes for 'perf test' shell scripts testing features enabled when
     perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
     counters.

   - Add perf record sample filtering test, things like the following
     example, that gets implemented as a BPF filter attached to the
     event:

       # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'

   - Improve the way the task_analyzer test checks if libtraceevent is
     linked, using 'perf version --build-options' instead of the more
     expensinve 'perf record -e "sched:sched_switch"'.

   - Add support for riscv in the mmap-basic test. (This went as well
     via the RiscV tree, same contents).

  libperf:

   - Implement riscv mmap support (This went as well via the RiscV tree,
     same contents).

  perf script:

   - New tool that converts perf.data files to the firefox profiler
     format so that one can use the visualizer at
     https://profiler.firefox.com/. Done by Anup Sharma as part of this
     year's Google Summer of Code.

     One can generate the output and upload it to the web interface but
     Anup also automated everything:

       perf script gecko -F 99 -a sleep 60

   - Support syscall name parsing on arm64.

   - Print "cgroup" field on the same line as "comm".

  perf bench:

   - Add new 'uprobe' benchmark to measure the overhead of uprobes
     with/without BPF programs attached to it.

   - breakpoints are not available on power9, skip that test.

  perf stat:

   - Add #num_cpus_online literal to be used in 'perf stat' metrics, and
     add this extra 'perf test' check that exemplifies its purpose:

   TEST_ASSERT_VAL("#num_cpus_online",
                         expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
   TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
   TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);

  Miscellaneous:

   - Improve tool startup time by lazily reading PMU, JSON, sysfs data.

   - Improve error reporting in the parsing of events, passing YYLTYPE
     to error routines, so that the output can show were the parsing
     error was found.

   - Add 'perf test' entries to check the parsing of events
     improvements.

   - Fix various leak for things detected by -fsanitize=address, mostly
     things that would be freed at tool exit, including:

       - Free evsel->filter on the destructor.

       - Allow tools to register a thread->priv destructor and use it in
         'perf trace'.

       - Free evsel->priv in 'perf trace'.

       - Free string returned by synthesize_perf_probe_point() when the
         caller fails to do all it needs.

   - Adjust various compiler options to not consider errors some
     warnings when building with broken headers found in things like
     python, flex, bison, as we otherwise build with -Werror. Some for
     gcc, some for clang, some for some specific version of those, some
     for some specific version of flex or bison, or some specific
     combination of these components, bah.

   - Allow customization of clang options for BPF target, this helps
     building on gentoo where there are other oddities where BPF targets
     gets passed some compiler options intended for the native build, so
     building with WERROR=0 helps while these oddities are fixed.

   - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
     and 'perf lock', fixing some segfaults when handling some odd
     failures.

   - Add LTO build option.

   - Fix format of unordered lists in the perf docs
     (tools/perf/Documentation)

   - Overhaul the bison files, using constructs such as YYNOMEM.

   - Remove unused tokens from the bison .y files.

   - Add more comments to various structs.

   - A few LoongArch enablement patches.

  Vendor events (JSON):

   - Add JSON metrics for Yitian 710 DDR (aarch64). Things like:

   EventName, BriefDescription
   visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
   visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
   op_is_dqsosc_mpc        , "A DQS Oscillator MPC command to DRAM.",
   op_is_dqsosc_mrr        , "A DQS Oscillator MRR command to DRAM.",
   op_is_tcr_mrr        , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",

   - Add AmpereOne metrics (aarch64).

   - Update N2 and V2 metrics (aarch64) and events using Arm telemetry
     repo.

   - Update scale units and descriptions of common topdown metrics on
     aarch64. Things like:
       - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
       - "BriefDescription": "Frontend bound L1 topdown metric",
       + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
       + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",

   - Update events for intel: meteorlake to 1.04, sapphirerapids to
     1.15, Icelake+ metric constraints.

   - Update files for the power10 platform"

* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
  perf parse-events: Fix driver config term
  perf parse-events: Fixes relating to no_value terms
  perf parse-events: Fix propagation of term's no_value when cloning
  perf parse-events: Name the two term enums
  perf list: Don't print Unit for "default_core"
  perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
  perf dlfilter: Avoid leak in v0 API test use of resolve_address()
  perf metric: Add #num_cpus_online literal
  perf pmu: Remove str from perf_pmu_alias
  perf parse-events: Make common term list to strbuf helper
  perf parse-events: Minor help message improvements
  perf pmu: Avoid uninitialized use of alias->str
  perf jevents: Use "default_core" for events with no Unit
  perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
  perf test shell stat_bpf_counters: Fix test on Intel
  perf test shell record_bpf_filter: Skip 6.2 kernel
  libperf: Get rid of attr.id field
  perf tools: Convert to perf_record_header_attr_id()
  libperf: Add perf_record_header_attr_id()
  perf tools: Handle old data in PERF_RECORD_ATTR
  ...

Merge tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- six smb3 client fixes including ones to allow controlling smb3
   directory caching timeout and limits, and one debugging improvement

- one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option)

- one minor spnego registry update

* tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  spnego: add missing OID to oid registry
  smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
  cifs: update internal module version number for cifs.ko
  smb3: allow controlling maximum number of cached directories
  smb3: add trace point for queryfs (statfs)
  nls: Hide new NLS_UCS2_UTILS
  smb3: allow controlling length of time directory entries are cached with dir leases
  smb: propagate error code of extract_sharename()

iov_iter: Kunit tests for page extraction

Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction. ITER_DISCARD isn't dealt with
either as that can't be extracted.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iov_iter: Kunit tests for copying to/from an iterator

Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction. ITER_DISCARD isn't dealt with
either as that does nothing.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iov_iter: Fix iov_iter_extract_pages() with zero-sized entries

iov_iter_extract_pages() doesn't correctly handle skipping over initial
zero-length entries in ITER_KVEC and ITER_BVEC-type iterators.

The problem is that it accidentally reduces maxsize to 0 when it
skipping and thus runs to the end of the array and returns 0.

Fix this by sticking the calculated size-to-copy in a new variable
rather than back in maxsize.

Fixes: 7d58fe731028 ("iov_iter: Add a function to extract a page list from an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'sh-for-v6.6-tag1' of git://git./linux/kernel/git/glaubitz/sh-linux

Pull sh updates from Adrian Glaubitz:

- Fix a use-after-free bug in the push-switch driver (Duoming Zhou)

- Fix calls to dma_declare_coherent_memory() that incorrectly passed
   the buffer end address instead of the buffer size as the size
   parameter

* tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
  sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()

Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- The kernel now dynamically probes for misaligned access speed, as
   opposed to relying on a table of known implementations.

- Support for non-coherent devices on systems using the Andes AX45MP
   core, including the RZ/Five SoCs.

- Support for the V extension in ptrace(), again.

- Support for KASLR.

- Support for the BPF prog pack allocator in RISC-V.

- A handful of bug fixes and cleanups.

* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
  soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
  riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
  riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
  riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
  bpf, riscv: use prog pack allocator in the BPF JIT
  riscv: implement a memset like function for text
  riscv: extend patch_text_nosync() for multiple pages
  bpf: make bpf_prog_pack allocator portable
  riscv: libstub: Implement KASLR by using generic functions
  libstub: Fix compilation warning for rv32
  arm64: libstub: Move KASLR handling functions to kaslr.c
  riscv: Dump out kernel offset information on panic
  riscv: Introduce virtual kernel mapping KASLR
  RISC-V: Add ptrace support for vectors
  soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
  cache: Add L2 cache management for Andes AX45MP RISC-V core
  dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
  riscv: mm: dma-noncoherent: nonstandard cache operations support
  riscv: errata: Add Andes alternative ports
  riscv: asm: vendorid_list: Add Andes Technology to the vendors list
  ...

sh: push-switch: Reorder cleanup operations to avoid use-after-free bug

The original code puts flush_work() before timer_shutdown_sync()
in switch_drv_remove(). Although we use flush_work() to stop
the worker, it could be rescheduled in switch_timer(). As a result,
a use-after-free bug can occur. The details are shown below:

      (cpu 0)                    |      (cpu 1)
switch_drv_remove()              |
flush_work()                    |
  ...                            |  switch_timer // timer
                                 |   schedule_work(&psw->work)
timer_shutdown_sync()           |
...                             |  switch_work_handler // worker
kfree(psw) // free              |
                                 |   psw->state = 0 // use

This patch puts timer_shutdown_sync() before flush_work() to
mitigate the bugs. As a result, the worker and timer will be
stopped safely before the deallocate operations.

Fixes: 9f5e8eee5cfe ("sh: generic push-switch framework.")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230802033737.9738-1-duoming@zju.edu.cn
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()

In all these cases, the last argument to dma_declare_coherent_memory() is
the buffer end address, but the expected value should be the size of the
reserved region.

Fixes: 39fb993038e1 ("media: arch: sh: ap325rxa: Use new renesas-ceu camera driver")
Fixes: c2f9b05fd5c1 ("media: arch: sh: ecovec: Use new renesas-ceu camera driver")
Fixes: f3590dc32974 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")
Fixes: 186c446f4b84 ("media: arch: sh: migor: Use new renesas-ceu camera driver")
Fixes: 1a3c230b4151 ("media: arch: sh: ms7724se: Use new renesas-ceu camera driver")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230724120742.2187-1-petrtesarik@huaweicloud.com
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
"Mostly small stragglers that missed the initial merge.

  Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat
  due to the volatile qualifier removal, fnic due to unused function
  removal and sd.c has a lot of code shuffling to remove forward
  declarations)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
  scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler
  scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD
  scsi: mpt3sas: Remove volatile qualifier
  scsi: mpt3sas: Perform additional retries if doorbell read returns 0
  scsi: libsas: Simplify sas_queue_reset() and remove unused code
  scsi: ufs: Fix the build for the old ARM OABI
  scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
  scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag()
  scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
  scsi: fnic: Replace sgreset tag with max_tag_id
  scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()
  scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error
  scsi: smartpqi: Change driver version to 2.1.24-046
  scsi: smartpqi: Enhance error messages
  scsi: smartpqi: Enhance controller offline notification
  scsi: smartpqi: Enhance shutdown notification
  scsi: smartpqi: Simplify lun_number assignment
  scsi: smartpqi: Rename pciinfo to pci_info
  scsi: smartpqi: Rename MACRO to clarify purpose
  scsi: smartpqi: Add abort handler
  ...

Merge tag 'driver-core-6.6-rc1-2' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver symbol lookup fix from Greg KH:
"Here is one last fixup for your tree for 6.6-rc1. It resolves a
  problem with the way that symbol_get was changed in the module tree
  merge in your tree to fix up the DVB drivers which rely on this old
  api to attach new devices.

  As the changelog comment says:

    In commit 9011e49d54dc ("modules: only allow symbol_get of
    EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly
    restricted to GPL-only marked symbols. This interacts oddly with the
    DVB logic which only uses dvb_attach() to load the dvb driver which
    then uses symbol_get().

    Fix this up by properly marking all of the dvb_attach attach symbols
    as EXPORT_SYMBOL_GPL().

  This has been acked by Hans from the V4L driver side, Luis from the
  module side, Mauro on the media side, and Christoph said it was the
  correct solution, and was tested by the original reporter of the
  issue.

  It has passed 0-day testing, but has not been in linux-next due to it
  only being sent yesterday"

* tag 'driver-core-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  media: dvb: symbol fixup for dvb_attach()

Merge tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

- move a dma-debug call that prints a message out from a lock that's
   causing problems with the lock order in serial drivers (Sergey
   Senozhatsky)

- fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right
   dependency and not default to y (Christoph Hellwig)

- move an ifdef a bit to remove a __maybe_unused that seems to trip up
   some sensitivities (Christoph Hellwig)

- revert a bogus check in the CMA allocator (Zhenhua Huang)

* tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping:
  Revert "dma-contiguous: check for memory region overlap"
  dma-pool: remove a __maybe_unused label in atomic_pool_expand
  dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA
  dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock

Merge tag 'pci-v6.6-fixes-1' of git://git./linux/kernel/git/pci/pci

Pull PCI fixes from Bjorn Helgaas:

- Add PCI_DYNAMIC_OF_NODES dependency on OF_IRQ to fix sparc64 build
   error (Lizhi Hou)

- After coalescing host bridge resources, free any released resources
   to avoid a leak (Ross Lagerwall)

- Revert a quirk that prevented NVIDIA T4 GPUs from using Secondary Bus
   Reset. The quirk worked around an issue that we now think is related
   to the Root Port, not the GPU (Bjorn Helgaas)

* tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"
  PCI: Free released resource after coalescing
  PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig dependencies

Merge tag 'ntb-6.6' of https://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
"Link toggling fixes and debugfs error path fixes"

[ And for everybody like me who always have to remind themselves what
  the TLA of the day is, and what NTB stands for - it's a PCIe
  "Non-Transparent Bridge" thing    - Linus ]

* tag 'ntb-6.6' of https://github.com/jonmason/ntb:
  ntb: Check tx descriptors outstanding instead of head/tail for tx queue
  ntb: Fix calculation ntb_transport_tx_free_entry()
  ntb: Drop packets when qp link is down
  ntb: Clean up tx tail index on link down
  ntb: amd: Drop unnecessary error check for debugfs_create_dir
  NTB: ntb_tool: Switch to memdup_user_nul() helper
  dtivers: ntb: fix parameter check in perf_setup_dbgfs()
  ntb: Remove error checking for debugfs_create_dir()

spnego: add missing OID to oid registry

Add missing OID to the registry. Some servers and clients (including
Windows) now request "NEGOEX - SPNEGEO Extended Negotiation Security")

See https://datatracker.ietf.org/doc/html/draft-zhu-negoex-02

Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

media: dvb: symbol fixup for dvb_attach()

In commit 9011e49d54dc ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols. This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().

Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().

Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag '6.6-rc-ksmbd' of git://git.samba.org/ksmbd

Pull smb server update from Steve French:
"After two years, many fixes and much testing, ksmbd is no longer
experimental"

* tag '6.6-rc-ksmbd' of git://git.samba.org/ksmbd:
ksmbd: remove experimental warning

Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray

Pull xarray fixes from Matthew Wilcox:

- Fix a bug encountered by people using bittorrent where they'd get
   NULL pointer dereferences on page cache lookups when using XFS

- Two documentation fixes

* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
  idr: fix param name in idr_alloc_cyclic() doc
  xarray: Document necessary flag in alloc functions
  XArray: Do not return sibling entries from xa_load()

Merge tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- Fix null_blk polled IO timeout handling (Chengming)

- Regression fix for swapped arguments in drbd bvec_set_page()
   (Christoph)

- String length handling fix for s390 dasd (Heiko)

- Fixes for blk-throttle accounting (Yu)

- Fix page pinning issue for same page segments (Christoph)

- Remove redundant file_remove_privs() call (Christoph)

- Fix a regression in partition handling for devices not supporting
   partitions (Li)

* tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux:
  drbd: swap bvec_set_page len and offset
  block: fix pin count management when merging same-page segments
  null_blk: fix poll request timeout handling
  s390/dasd: fix string length handling
  block: don't add or resize partition on the disk with GENHD_FL_NO_PART
  block: remove the call to file_remove_privs in blkdev_write_iter
  blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()
  blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()
  blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative
  blk-throttle: print signed value 'carryover_bytes/ios' for user

Merge tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 6.6-rc merge window:

   - Fix for a regression this merge window caused by the SQPOLL
     affinity patch, where we can race with SQPOLL thread shutdown and
     cause an oops when trying to set affinity (Gabriel)

   - Fix for a regression this merge window where fdinfo reading with
     for a ring setup with IORING_SETUP_NO_SQARRAY will attempt to
     deference the non-existing SQ ring array (me)

   - Add the patch that allows more finegrained control over who can use
     io_uring (Matteo)

   - Locking fix for a regression added this merge window for IOPOLL
     overflow (Pavel)

   - IOPOLL fix for stable, breaking our loop if helper threads are
     exiting (Pavel)

  Also had a fix for unreaped iopoll requests from io-wq from Ming, but
  we found an issue with that and hence it got reverted. Will get this
  sorted for a future rc"

* tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux:
  Revert "io_uring: fix IO hang in io_wq_put_and_exit from do_exit()"
  io_uring: fix unprotected iopoll overflow
  io_uring: break out of iowq iopoll on teardown
  io_uring: add a sysctl to disable io_uring system-wide
  io_uring/fdinfo: only print ->sq_array[] if it's there
  io_uring: fix IO hang in io_wq_put_and_exit from do_exit()
  io_uring: Don't set affinity on a dying sqpoll thread

smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU

There was a minor typo in the define for SMB2_GLOBAL_CAP_LARGE_MTU
0X00000004 instead of 0x00000004
make it consistent

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'thermal-6.6-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
"Eliminate an obsolete thermal zone registration function"

* tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Drop thermal_zone_device_register()
  thermal: Use thermal_tripless_zone_device_register()
  thermal: core: Add function for registering tripless thermal zones
  thermal: core: Clean up headers of thermal zone registration functions

Merge tag 'pm-6.6-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Fix an Intel RAPL power capping driver regression introduced during
the 6.5 development cycle (Srinivas Pandruvada)"

* tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix invalid setting of Power Limit 4

Merge tag 'gpio-fixes-for-v6.6-rc1' of git://git./linux/kernel/git/brgl/linux

Pull gpio fix from Bartosz Golaszewski:

- fix a regression in irqchip setup in gpio-zynq

* tag 'gpio-fixes-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: zynq: restore zynq_gpio_irq_reqres/zynq_gpio_irq_relres callbacks

Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"

This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83.

d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.

But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4. The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.

Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.

Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Merge tag 'sound-fix-6.6-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.

   - The corrections of the previous PCM iov_iter transitions

   - Regression fixes in MIDI 2.0 / USB changes

   - Various ASoC codec fixes for Cirrus, Realtek, WCD

   - ASoC AMD quirks and ASoC Intel AVS driver workaround"

* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek - ALC287 I2S speaker platform support
  ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
  ASoC: Intel: avs: Provide support for fallback topology
  ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
  ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
  ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
  ASoC: rt5645: NULL pointer access when removing jack
  ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
  MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
  ALSA: sb: Fix wrong argument in commented code
  ALSA: pcm: Fix error checks of default read/write copy ops
  ASoC: Name iov_iter argument as iterator instead of buffer
  ASoC: dmaengine: Drop unused iov_iter for process callback
  ALSA: hda/tas2781: Use standard clamp() macro
  ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
  ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
  ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
  ASoC: cs35l45: Rename DACPCM1 Source control
  ASoC: cs35l45: Fix "Dead assigment" warning
  ASoC: cs35l45: Add support for Chip ID 0x35A460
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"The main one is a fix for a broken strscpy() conversion that landed in
  the merge window and broke early parsing of the kernel command line.

   - Fix an incorrect mask in the CXL PMU driver

   - Fix a regression in early parsing of the kernel command line

   - Fix an IP checksum OoB access reported by syzbot"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: csum: Fix OoB access in IP checksum code for negative lengths
  arm64/sysreg: Fix broken strncpy() -> strscpy() conversion
  perf: CXL: fix mismatched number of counters mask

Merge tag 'loongarch-6.6' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

- Allow usage of LSX/LASX in the kernel, and use them for
   SIMD-optimized RAID5/RAID6 routines

- Add Loongson Binary Translation (LBT) extension support

- Add basic KGDB & KDB support

- Add building with kcov coverage

- Add KFENCE (Kernel Electric-Fence) support

- Add KASAN (Kernel Address Sanitizer) support

- Some bug fixes and other small changes

- Update the default config file

* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add KASAN (Kernel Address Sanitizer) support
  LoongArch: Simplify the processing of jumping new kernel for KASLR
  kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
  kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
  LoongArch: Add KFENCE (Kernel Electric-Fence) support
  LoongArch: Get partial stack information when providing regs parameter
  LoongArch: mm: Add page table mapped mode support for virt_to_page()
  kfence: Defer the assignment of the local variable addr
  LoongArch: Allow building with kcov coverage
  LoongArch: Provide kaslr_offset() to get kernel offset
  LoongArch: Add basic KGDB & KDB support
  LoongArch: Add Loongson Binary Translation (LBT) extension support
  raid6: Add LoongArch SIMD recovery implementation
  raid6: Add LoongArch SIMD syndrome calculation
  LoongArch: Add SIMD-optimized XOR routines
  LoongArch: Allow usage of LSX/LASX in the kernel
  LoongArch: Define symbol 'fault' as a local label in fpu.S
  LoongArch: Adjust {copy, clear}_user exception handler behavior
  LoongArch: Use static defined zero page rather than allocated
  ...

Merge tag 'printk-for-6.6-fixup' of git://git./linux/kernel/git/printk/linux

Pull printk fix from Petr Mladek:

- Revert exporting symbols needed for dumping the raw printk buffer in
   panic().

   I pushed the export prematurely before the user was ready for merging
   into the mainline.

* tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  Revert "printk: export symbols for debug modules"

Merge tag 'landlock-6.6-rc1' of git://git./linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"

* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by

soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met

To prevent randconfig build issues when enabling the RZ/Five SoC, consider
selecting specific configurations only when their dependencies are
satisfied.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901110936.313171-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config

Andes errata uses sbi_ecalll() which is only available if RISCV_SBI is
enabled. So add an dependency for RISCV_SBI in ERRATA_ANDES config to
avoid any build failures.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230901110320.312674-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config

Now that RISCV_DMA_NONCOHERENT conditionally selects DMA_DIRECT_REMAP
ie only if MMU is enabled, we no longer need the MMU dependency in
ERRATA_ANDES_CMO config.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901105858.311745-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled

kernel/dma/mapping.c has its use of pgprot_dmacoherent() inside
an #ifdef CONFIG_MMU block. kernel/dma/pool.c has its use of
pgprot_dmacoherent() inside an #ifdef CONFIG_DMA_DIRECT_REMAP block.
So select DMA_DIRECT_REMAP only if MMU is enabled for RISCV_DMA_NONCOHERENT
config.

This avoids users to explicitly select MMU.

Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230901105111.311200-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "bpf, riscv: use BPF prog pack allocator in BPF JIT"

Puranjay Mohan <puranjay12@gmail.com> says:

Here is some data to prove the V2 fixes the problem:

Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m47.562s
user    0m24.145s
sys     6m37.064s

With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m29.472s
user    0m25.865s
sys     6m18.401s

BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.

Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.

I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.

This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.

======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================

Test setup:
===========

Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1

To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.

The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.

The script was run with following perf command:
./run.sh "perf stat -a \
        -e iTLB-load-misses \
        -e dTLB-load-misses  \
        -e dTLB-store-misses \
        -e instructions \
        --timeout 60000"

The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.

The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.

Results
=======

Before enabling prog pack allocator:
------------------------------------

Performance counter stats for 'system wide':

           4939048      iTLB-load-misses
           5468689      dTLB-load-misses
            465234      dTLB-store-misses
     1441082097998      instructions

      60.045791200 seconds time elapsed

After enabling prog pack allocator:
-----------------------------------

Performance counter stats for 'system wide':

           3430035      iTLB-load-misses
           5008745      dTLB-load-misses
            409944      dTLB-store-misses
     1441535637988      instructions

      60.046296600 seconds time elapsed

Improvements in metrics
=======================

It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.

--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------

I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.

This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs

[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards

* b4-shazam-merge:
  bpf, riscv: use prog pack allocator in the BPF JIT
  riscv: implement a memset like function for text
  riscv: extend patch_text_nosync() for multiple pages
  bpf: make bpf_prog_pack allocator portable

Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "riscv: Introduce KASLR"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

The following KASLR implementation allows to randomize the kernel mapping:

- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
  provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
  hence the patch 3 factorizes KASLR related functions for riscv to take
  advantage.

The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.

* b4-shazam-merge:
  riscv: libstub: Implement KASLR by using generic functions
  libstub: Fix compilation warning for rv32
  arm64: libstub: Move KASLR handling functions to kaslr.c
  riscv: Dump out kernel offset information on panic
  riscv: Introduce virtual kernel mapping KASLR

Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch "RISC-V: Add ptrace support for vectors"

This resurrects the vector ptrace() support that was removed for 6.5 due
to some bugs cropping up as part of the GDB review process.

* b4-shazam-merge:
RISC-V: Add ptrace support for vectors

Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "Add non-coherent DMA support for AX45MP"

Prabhakar <prabhakar.csengg@gmail.com> says:

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

non-coherent DMA support for AX45MP
====================================

On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:

1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.

Below are the configs which Andes port provides (and are selected by
RZ/Five):
      - ERRATA_ANDES
      - ERRATA_ANDES_CMO

OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.

2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.

Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.

    reserved-memory {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        pma_resv0@58000000 {
            compatible = "shared-dma-pool";
            reg = <0x0 0x58000000 0x0 0x08000000>;
            no-map;
            linux,dma-default;
        };
    };

The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.

3] We provide callbacks to synchronize specific content between memory and
cache.

4] RZ/Five SoC selects the below configs
        - AX45MP_L2_CACHE
        - DMA_GLOBAL_POOL
        - ERRATA_ANDES
        - ERRATA_ANDES_CMO

----------x---------------------x--------------------x---------------x----

* b4-shazam-merge:
  soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
  cache: Add L2 cache management for Andes AX45MP RISC-V core
  dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
  riscv: mm: dma-noncoherent: nonstandard cache operations support
  riscv: errata: Add Andes alternative ports
  riscv: asm: vendorid_list: Add Andes Technology to the vendors list

Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "riscv: dma-mapping: unify support for cache flushes"

Prabhakar <prabhakar.csengg@gmail.com> says:

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

This patch series is a subset from Arnd's original series [0]. Ive just
picked up the bits required for RISC-V unification of cache flushing.
Remaining patches from the series [0] will be taken care by Arnd soon.

* b4-shazam-merge:
  riscv: dma-mapping: switch over to generic implementation
  riscv: dma-mapping: skip invalidation before bidirectional DMA
  riscv: dma-mapping: only invalidate after DMA, not flush

Link: https://lore.kernel.org/r/20230816232336.164413-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "RISC-V: Probe for misaligned access speed"

Evan Green <evan@rivosinc.com> says:

The current setting for the hwprobe bit indicating misaligned access
speed is controlled by a vendor-specific feature probe function. This is
essentially a per-SoC table we have to maintain on behalf of each vendor
going forward. Let's convert that instead to something we detect at
runtime.

We have two assembly routines at the heart of our probe: one that
does a bunch of word-sized accesses (without aligning its input buffer),
and the other that does byte accesses. If we can move a larger number of
bytes using misaligned word accesses than we can with the same amount of
time doing byte accesses, then we can declare misaligned accesses as
"fast".

The tradeoff of reducing this maintenance burden is boot time. We spend
4-6 jiffies per core doing this measurement (0-2 on jiffie edge
alignment, and 4 on measurement). The timing loop was based on
raid6_choose_gen(), which uses (16+1)*N jiffies (where N is the number
of algorithms). By taking only the fastest iteration out of all
attempts for use in the comparison, variance between runs is very low.
On my THead C906, it looks like this:

[    0.047563] cpu0: Ratio of byte access time to unaligned word access is 4.34, unaligned accesses are fast

Several others have chimed in with results on slow machines with the
older algorithm, which took all runs into account, including noise like
interrupts. Even with this variation, results indicate that in all cases
(fast, slow, and emulated) the measured numbers are nowhere near each
other (always multiple factors away).

* b4-shazam-merge:
  RISC-V: alternative: Remove feature_probe_func
  RISC-V: Probe for unaligned access speed

Link: https://lore.kernel.org/r/20230818194136.4084400-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

selftests: Keep symlinks, when possible

When kselftest is built/installed with the 'gen_tar' target, rsync is
used for the installation step to copy files. Extra care is needed for
tests that have symlinks. Commit ae108c48b5d2 ("selftests: net: Fix
cross-tree inclusion of scripts") added '-L' (transform symlink into
referent file/dir) to rsync, to fix dangling links. However, that
broke some tests where the symlink (being a symlink) is part of the
test (e.g. exec:execveat).

Use rsync's '--copy-unsafe-links' that does right thing.

Fixes: ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests: fix dependency checker script

This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/ /\t/g).

Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

kselftest/runner.sh: Propagate SIGTERM to runner child

Timeouts in kselftest are done using the "timeout" command with the
"--foreground" option. Without the "foreground" option, it is not
possible for a user to cancel the runner using SIGINT, because the
signal is not propagated to timeout which is running in a different
process group. The "forground" options places the timeout in the same
process group as its parent, but only sends the SIGTERM (on timeout)
signal to the forked process. Unfortunately, this does not play nice
with all kselftests, e.g. "net:fcnal-test.sh", where the child
processes will linger because timeout does not send SIGTERM to the
group.

Some users have noted these hangs [1].

Fix this by nesting the timeout with an additional timeout without the
foreground option.

Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/
Fixes: 651e0d881461 ("kselftest/runner: allow to properly deliver signals to tests")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

MAINTAINERS: remove links to obsolete btrfs.wiki.

The wiki has been archived and is not updated anymore. Remove or replace
the links in files that contain it (MAINTAINERS, Kconfig, docs).

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: assert delayed node locked when removing delayed item

When removing a delayed item, or releasing which will remove it as well,
we will modify one of the delayed node's rbtrees and item counter if the
delayed item is in one of the rbtrees. This require having the delayed
node's mutex locked, otherwise we will race with other tasks modifying
the rbtrees and the counter.

This is motivated by a previous version of another patch actually calling
btrfs_release_delayed_item() after unlocking the delayed node's mutex and
against a delayed item that is in a rbtree.

So assert at __btrfs_remove_delayed_item() that the delayed node's mutex
is locked.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove BUG() after failure to insert delayed dir index item

Instead of calling BUG() when we fail to insert a delayed dir index item
into the delayed node's tree, we can just release all the resources we
have allocated/acquired before and return the error to the caller. This is
fine because all existing call chains undo anything they have done before
calling btrfs_insert_delayed_dir_index() or BUG_ON (when creating pending
snapshots in the transaction commit path).

So remove the BUG() call and do proper error handling.

This relates to a syzbot report linked below, but does not fix it because
it only prevents hitting a BUG(), it does not fix the issue where somehow
we attempt to use twice the same index number for different index items.

Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: improve error message after failure to add delayed dir index item

If we fail to add a delayed dir index item because there's already another
item with the same index number, we print an error message (and then BUG).
However that message isn't very helpful to debug anything because we don't
know what's the index number and what are the values of index counters in
the inode and its delayed inode (index_cnt fields of struct btrfs_inode
and struct btrfs_delayed_node).

So update the error message to include the index number and counters.

We actually had a recent case where this issue was hit by a syzbot report
(see the link below).

Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix a compilation error if DEBUG is defined in btree_dirty_folio

[BUG]
After commit 72a69cd03082 ("btrfs: subpage: pack all subpage bitmaps
into a larger bitmap"), the DEBUG section of btree_dirty_folio() would
no longer compile.

[CAUSE]
If DEBUG is defined, we would do extra checks for btree_dirty_folio(),
mostly to make sure the range we marked dirty has an extent buffer and
that extent buffer is dirty.

For subpage, we need to iterate through all the extent buffers covered
by that page range, and make sure they all matches the criteria.

However commit 72a69cd03082 ("btrfs: subpage: pack all subpage bitmaps
into a larger bitmap") changes how we store the bitmap, we pack all the
16 bits bitmaps into a larger bitmap, which would save some space.

This means we no longer have btrfs_subpage::dirty_bitmap, instead the
dirty bitmap is starting at btrfs_subpage_info::dirty_offset, and has a
length of btrfs_subpage_info::bitmap_nr_bits.

[FIX]
Although I'm not sure if it still makes sense to maintain such code, at
least let it compile.

This patch would let us test the bits one by one through the bitmaps.

CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: check for BTRFS_FS_ERROR in pending ordered assert

If we do fast tree logging we increment a counter on the current
transaction for every ordered extent we need to wait for.  This means we
expect the transaction to still be there when we clear pending on the
ordered extent.  However if we happen to abort the transaction and clean
it up, there could be no running transaction, and thus we'll trip the
"ASSERT(trans)" check.  This is obviously incorrect, and the code
properly deals with the case that the transaction doesn't exist.  Fix
this ASSERT() to only fire if there's no trans and we don't have
BTRFS_FS_ERROR() set on the file system.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix lockdep splat and potential deadlock after failure running delayed items

When running delayed items we are holding a delayed node's mutex and then
we will attempt to modify a subvolume btree to insert/update/delete the
delayed items. However if have an error during the insertions for example,
btrfs_insert_delayed_items() may return with a path that has locked extent
buffers (a leaf at the very least), and then we attempt to release the
delayed node at __btrfs_run_delayed_items(), which requires taking the
delayed node's mutex, causing an ABBA type of deadlock. This was reported
by syzbot and the lockdep splat is the following:

  WARNING: possible circular locking dependency detected
  6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Not tainted
  ------------------------------------------------------
  syz-executor.2/13257 is trying to acquire lock:
  ffff88801835c0c0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256

  but task is already holding lock:
  ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (btrfs-tree-00){++++}-{3:3}:
         __lock_release kernel/locking/lockdep.c:5475 [inline]
         lock_release+0x36f/0x9d0 kernel/locking/lockdep.c:5781
         up_write+0x79/0x580 kernel/locking/rwsem.c:1625
         btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline]
         btrfs_unlock_up_safe+0x179/0x3b0 fs/btrfs/locking.c:239
         search_leaf fs/btrfs/ctree.c:1986 [inline]
         btrfs_search_slot+0x2511/0x2f80 fs/btrfs/ctree.c:2230
         btrfs_insert_empty_items+0x9c/0x180 fs/btrfs/ctree.c:4376
         btrfs_insert_delayed_item fs/btrfs/delayed-inode.c:746 [inline]
         btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline]
         __btrfs_commit_inode_delayed_items+0xd24/0x2410 fs/btrfs/delayed-inode.c:1111
         __btrfs_run_delayed_items+0x1db/0x430 fs/btrfs/delayed-inode.c:1153
         flush_space+0x269/0xe70 fs/btrfs/space-info.c:723
         btrfs_async_reclaim_metadata_space+0x106/0x350 fs/btrfs/space-info.c:1078
         process_one_work+0x92c/0x12c0 kernel/workqueue.c:2600
         worker_thread+0xa63/0x1210 kernel/workqueue.c:2751
         kthread+0x2b8/0x350 kernel/kthread.c:389
         ret_from_fork+0x2e/0x60 arch/x86/kernel/process.c:145
         ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

  -> #0 (&delayed_node->mutex){+.+.}-{3:3}:
         check_prev_add kernel/locking/lockdep.c:3142 [inline]
         check_prevs_add kernel/locking/lockdep.c:3261 [inline]
         validate_chain kernel/locking/lockdep.c:3876 [inline]
         __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
         lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
         __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603
         __mutex_lock kernel/locking/mutex.c:747 [inline]
         mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799
         __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256
         btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline]
         __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156
         btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276
         btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988
         vfs_fsync_range fs/sync.c:188 [inline]
         vfs_fsync fs/sync.c:202 [inline]
         do_fsync fs/sync.c:212 [inline]
         __do_sys_fsync fs/sync.c:220 [inline]
         __se_sys_fsync fs/sync.c:218 [inline]
         __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218
         do_syscall_x64 arch/x86/entry/common.c:50 [inline]
         do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
         entry_SYSCALL_64_after_hwframe+0x63/0xcd

  other info that might help us debug this:

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(btrfs-tree-00);
                                 lock(&delayed_node->mutex);
                                 lock(btrfs-tree-00);
    lock(&delayed_node->mutex);

   *** DEADLOCK ***

  3 locks held by syz-executor.2/13257:
   #0: ffff88802c1ee370 (btrfs_trans_num_writers){++++}-{0:0}, at: spin_unlock include/linux/spinlock.h:391 [inline]
   #0: ffff88802c1ee370 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0xb87/0xe00 fs/btrfs/transaction.c:287
   #1: ffff88802c1ee398 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0xbb2/0xe00 fs/btrfs/transaction.c:288
   #2: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198

  stack backtrace:
  CPU: 0 PID: 13257 Comm: syz-executor.2 Not tainted 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
   check_noncircular+0x375/0x4a0 kernel/locking/lockdep.c:2195
   check_prev_add kernel/locking/lockdep.c:3142 [inline]
   check_prevs_add kernel/locking/lockdep.c:3261 [inline]
   validate_chain kernel/locking/lockdep.c:3876 [inline]
   __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
   lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
   __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603
   __mutex_lock kernel/locking/mutex.c:747 [inline]
   mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799
   __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256
   btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline]
   __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156
   btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276
   btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988
   vfs_fsync_range fs/sync.c:188 [inline]
   vfs_fsync fs/sync.c:202 [inline]
   do_fsync fs/sync.c:212 [inline]
   __do_sys_fsync fs/sync.c:220 [inline]
   __se_sys_fsync fs/sync.c:218 [inline]
   __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x7f3ad047cae9
  Code: 28 00 00 00 75 (...)
  RSP: 002b:00007f3ad12510c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
  RAX: ffffffffffffffda RBX: 00007f3ad059bf80 RCX: 00007f3ad047cae9
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
  RBP: 00007f3ad04c847a R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  R13: 000000000000000b R14: 00007f3ad059bf80 R15: 00007ffe56af92f8
   </TASK>
  ------------[ cut here ]------------

Fix this by releasing the path before releasing the delayed node in the
error path at __btrfs_run_delayed_items().

Reported-by: syzbot+a379155f07c134ea9879@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000abba27060403b5bd@google.com/
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not block starts waiting on previous transaction commit

Internally I got a report of very long stalls on normal operations like
creating a new file when auto relocation was running.  The reporter used
the 'bpf offcputime' tracer to show that we would get stuck in
start_transaction for 5 to 30 seconds, and were always being woken up by
the transaction commit.

Using my timing-everything script, which times how long a function takes
and what percentage of that total time is taken up by its children, I
saw several traces like this

1083 took 32812902424 ns
        29929002926 ns 91.2110% wait_for_commit_duration
        25568 ns 7.7920e-05% commit_fs_roots_duration
        1007751 ns 0.00307% commit_cowonly_roots_duration
        446855602 ns 1.36182% btrfs_run_delayed_refs_duration
        271980 ns 0.00082% btrfs_run_delayed_items_duration
        2008 ns 6.1195e-06% btrfs_apply_pending_changes_duration
        9656 ns 2.9427e-05% switch_commit_roots_duration
        1598 ns 4.8700e-06% btrfs_commit_device_sizes_duration
        4314 ns 1.3147e-05% btrfs_free_log_root_tree_duration

Here I was only tracing functions that happen where we are between
START_COMMIT and UNBLOCKED in order to see what would be keeping us
blocked for so long.  The wait_for_commit() we do is where we wait for a
previous transaction that hasn't completed it's commit.  This can
include all of the unpin work and other cleanups, which tends to be the
longest part of our transaction commit.

There is no reason we should be blocking new things from entering the
transaction at this point, it just adds to random latency spikes for no
reason.

Fix this by adding a PREP stage.  This allows us to properly deal with
multiple committers coming in at the same time, we retain the behavior
that the winner waits on the previous transaction and the losers all
wait for this transaction commit to occur.  Nothing else is blocked
during the PREP stage, and then once the wait is complete we switch to
COMMIT_START and all of the same behavior as before is maintained.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: release path before inode lookup during the ino lookup ioctl

During the ino lookup ioctl we can end up calling btrfs_iget() to get an
inode reference while we are holding on a root's btree. If btrfs_iget()
needs to lookup the inode from the root's btree, because it's not
currently loaded in memory, then it will need to lock another or the
same path in the same root btree. This may result in a deadlock and
trigger the following lockdep splat:

  WARNING: possible circular locking dependency detected
  6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted
  ------------------------------------------------------
  syz-executor277/5012 is trying to acquire lock:
  ffff88802df41710 (btrfs-tree-01){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136

  but task is already holding lock:
  ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (btrfs-tree-00){++++}-{3:3}:
         down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
         __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
         btrfs_search_slot+0x13a4/0x2f80 fs/btrfs/ctree.c:2302
         btrfs_init_root_free_objectid+0x148/0x320 fs/btrfs/disk-io.c:4955
         btrfs_init_fs_root fs/btrfs/disk-io.c:1128 [inline]
         btrfs_get_root_ref+0x5ae/0xae0 fs/btrfs/disk-io.c:1338
         btrfs_get_fs_root fs/btrfs/disk-io.c:1390 [inline]
         open_ctree+0x29c8/0x3030 fs/btrfs/disk-io.c:3494
         btrfs_fill_super+0x1c7/0x2f0 fs/btrfs/super.c:1154
         btrfs_mount_root+0x7e0/0x910 fs/btrfs/super.c:1519
         legacy_get_tree+0xef/0x190 fs/fs_context.c:611
         vfs_get_tree+0x8c/0x270 fs/super.c:1519
         fc_mount fs/namespace.c:1112 [inline]
         vfs_kern_mount+0xbc/0x150 fs/namespace.c:1142
         btrfs_mount+0x39f/0xb50 fs/btrfs/super.c:1579
         legacy_get_tree+0xef/0x190 fs/fs_context.c:611
         vfs_get_tree+0x8c/0x270 fs/super.c:1519
         do_new_mount+0x28f/0xae0 fs/namespace.c:3335
         do_mount fs/namespace.c:3675 [inline]
         __do_sys_mount fs/namespace.c:3884 [inline]
         __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861
         do_syscall_x64 arch/x86/entry/common.c:50 [inline]
         do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
         entry_SYSCALL_64_after_hwframe+0x63/0xcd

  -> #0 (btrfs-tree-01){++++}-{3:3}:
         check_prev_add kernel/locking/lockdep.c:3142 [inline]
         check_prevs_add kernel/locking/lockdep.c:3261 [inline]
         validate_chain kernel/locking/lockdep.c:3876 [inline]
         __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
         lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
         down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
         __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
         btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline]
         btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281
         btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline]
         btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154
         btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412
         btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline]
         btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716
         btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline]
         btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105
         btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683
         vfs_ioctl fs/ioctl.c:51 [inline]
         __do_sys_ioctl fs/ioctl.c:870 [inline]
         __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
         do_syscall_x64 arch/x86/entry/common.c:50 [inline]
         do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
         entry_SYSCALL_64_after_hwframe+0x63/0xcd

  other info that might help us debug this:

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    rlock(btrfs-tree-00);
                                 lock(btrfs-tree-01);
                                 lock(btrfs-tree-00);
    rlock(btrfs-tree-01);

   *** DEADLOCK ***

  1 lock held by syz-executor277/5012:
   #0: ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136

  stack backtrace:
  CPU: 1 PID: 5012 Comm: syz-executor277 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
   check_noncircular+0x375/0x4a0 kernel/locking/lockdep.c:2195
   check_prev_add kernel/locking/lockdep.c:3142 [inline]
   check_prevs_add kernel/locking/lockdep.c:3261 [inline]
   validate_chain kernel/locking/lockdep.c:3876 [inline]
   __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
   lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
   down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
   __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
   btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline]
   btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281
   btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline]
   btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154
   btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412
   btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline]
   btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716
   btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline]
   btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105
   btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:870 [inline]
   __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x7f0bec94ea39

Fix this simply by releasing the path before calling btrfs_iget() as at
point we don't need the path anymore.

Reported-by: syzbot+bf66ad948981797d2f1d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000045fa140603c4a969@google.com/
Fixes: 23d0b79dfaed ("btrfs: Add unprivileged version of ino_lookup ioctl")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix race between finishing block group creation and its item update

Commit 675dfe1223a6 ("btrfs: fix block group item corruption after
inserting new block group") fixed one race that resulted in not persisting
a block group's item when its "used" bytes field decreases to zero.
However there's another race that can happen in a much shorter time window
that results in the same problem. The following sequence of steps explains
how it can happen:

1) Task A creates a metadata block group X, its "used" and "commit_used"
   fields are initialized to 0;

2) Two extents are allocated from block group X, so its "used" field is
   updated to 32K, and its "commit_used" field remains as 0;

3) Transaction commit starts, by some task B, and it enters
   btrfs_start_dirty_block_groups(). There it tries to update the block
   group item for block group X, which currently has its "used" field with
   a value of 32K and its "commit_used" field with a value of 0. However
   that fails since the block group item was not yet inserted, so at
   update_block_group_item(), the btrfs_search_slot() call returns 1, and
   then we set 'ret' to -ENOENT. Before jumping to the label 'fail'...

4) The block group item is inserted by task A, when for example
   btrfs_create_pending_block_groups() is called when releasing its
   transaction handle. This results in insert_block_group_item() inserting
   the block group item in the extent tree (or block group tree), with a
   "used" field having a value of 32K and setting "commit_used", in struct
   btrfs_block_group, to the same value (32K);

5) Task B jumps to the 'fail' label and then resets the "commit_used"
   field to 0. At btrfs_start_dirty_block_groups(), because -ENOENT was
   returned from update_block_group_item(), we add the block group again
   to the list of dirty block groups, so that we will try again in the
   critical section of the transaction commit when calling
   btrfs_write_dirty_block_groups();

6) Later the two extents from block group X are freed, so its "used" field
   becomes 0;

7) If no more extents are allocated from block group X before we get into
   btrfs_write_dirty_block_groups(), then when we call
   update_block_group_item() again for block group X, we will not update
   the block group item to reflect that it has 0 bytes used, because the
   "used" and "commit_used" fields in struct btrfs_block_group have the
   same value, a value of 0.

   As a result after committing the transaction we have an empty block
   group with its block group item having a 32K value for its "used" field.
   This will trigger errors from fsck ("btrfs check" command) and after
   mounting again the fs, the cleaner kthread will not automatically delete
   the empty block group, since its "used" field is not 0. Possibly there
   are other issues due to this inconsistency.

   When this issue happens, the error reported by fsck is like this:

     [1/7] checking root items
     [2/7] checking extents
     block group [1104150528 1073741824] used 39796736 but extent items used 0
     ERROR: errors found in extent allocation tree or chunk allocation
     (...)

So fix this by not resetting the "commit_used" field of a block group when
we don't find the block group item at update_block_group_item().

Fixes: 7248e0cebbef ("btrfs: skip update of block group item if used bytes are the same")
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Revert "dma-contiguous: check for memory region overlap"

This reverts commit 3fa6456ebe13adab3ba1817c8e515a5b88f95dce.

The Commit broke the CMA region creation through DT on arm64,
as showed below logs with "memblock=debug":
[    0.000000] memblock_phys_alloc_range: 41943040 bytes align=0x200000
from=0x0000000000000000 max_addr=0x00000000ffffffff
early_init_dt_alloc_reserved_memory_arch+0x34/0xa0
[    0.000000] memblock_reserve: [0x00000000fd600000-0x00000000ffdfffff]
memblock_alloc_range_nid+0xc0/0x19c
[    0.000000] Reserved memory: overlap with other memblock reserved region

>From call flow, region we defined in DT was always reserved before entering
into rmem_cma_setup. Also, rmem_cma_setup has one routine cma_init_reserved_mem
to ensure the region was reserved. Checking the region not reserved here seems
not correct.

early_init_fdt_scan_reserved_mem:
    fdt_scan_reserved_mem
        __reserved_mem_reserve_reg
early_init_dt_reserve_memory
memblock_reserve(using “reg” prop case)
        fdt_init_reserved_mem
__reserved_mem_alloc_size
*early_init_dt_alloc_reserved_memory_arch*
memblock_reserve(dynamic alloc case)
        __reserved_mem_init_node
rmem_cma_setup(region overlap check here should always fail)

Example DT can be used to reproduce issue:

    dump_mem: mem_dump_region {
            compatible = "shared-dma-pool";
            alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
            reusable;
            size = <0 0x2800000>;
    };

Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>

Merge tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular rounds of rc1 fixes, a large bunch for amdgpu since it's three
  weeks in one go, one i915, one nouveau and one ivpu.

  I think there might be a few more fixes in misc that I haven't pulled
  in yet, but we should get them all for rc2.

  amdgpu:
   - Display replay fixes
   - Fixes for headless boards
   - Fix documentation breakage
   - RAS fixes
   - Handle newer IP discovery tables
   - SMU 13.0.6 fixes
   - SR-IOV fixes
   - Display vstartup fixes
   - NBIO 7.9 fixes
   - Display scaling mode fixes
   - Debugfs power reporting fix
   - GC 9.4.3 fixes
   - Dirty framebuffer fixes for fbcon
   - eDP fixes
   - DCN 3.1.5 fix
   - Display ODM fixes
   - GPU core dump fix
   - Re-enable zops property now that IGT test is fixed
   - Fix possible UAF in CS code
   - Cursor degamma fix

  amdkfd:
   - HMM fixes
   - Interrupt masking fix
   - GFX11 MQD fixes

  i915:
   - Mark requests for GuC virtual engines to avoid use-after-free

  nouveau:
   - Fix fence state in nouveau_fence_emit()

  ivpu:
   - replace strncpy"

* tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm: (51 commits)
  drm/amdgpu: Restrict bootloader wait to SMUv13.0.6
  drm/amd/display: prevent potential division by zero errors
  drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma
  drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1
  Revert "drm/amd/display: Remove v_startup workaround for dcn3+"
  drm/amdgpu: fix amdgpu_cs_p1_user_fence
  Revert "Revert "drm/amd/display: Implement zpos property""
  drm/amdkfd: Add missing gfx11 MQD manager callbacks
  drm/amdgpu: Free ras cmd input buffer properly
  drm/amdgpu: Hide xcp partition sysfs under SRIOV
  drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ setting
  drm/amdkfd: use mask to get v9 interrupt sq data bits correctly
  drm/amdgpu: Allocate coredump memory in a nonblocking way
  drm/amdgpu: Support query ecc cap for aqua_vanjaram
  drm/amdgpu: Add umc_info v4_0 structure
  drm/amd/display: always switch off ODM before committing more streams
  drm/amd/display: Remove wait while locked
  drm/amd/display: update blank state on ODM changes
  drm/amd/display: Add smu write msg id fail retry process
  drm/amdgpu: Add SMU v13.0.6 default reset methods
  ...

Merge tag 'net-6.6-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.

  Current release - regressions:

   - eth: stmmac: fix failure to probe without MAC interface specified

  Current release - new code bugs:

   - docs: netlink: fix missing classic_netlink doc reference

  Previous releases - regressions:

   - deal with integer overflows in kmalloc_reserve()

   - use sk_forward_alloc_get() in sk_get_meminfo()

   - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc

   - fib: avoid warn splat in flow dissector after packet mangling

   - skb_segment: call zero copy functions before using skbuff frags

   - eth: sfc: check for zero length in EF10 RX prefix

  Previous releases - always broken:

   - af_unix: fix msg_controllen test in scm_pidfd_recv() for
     MSG_CMSG_COMPAT

   - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()

   - netfilter:
      - nft_exthdr: fix non-linear header modification
      - xt_u32, xt_sctp: validate user space input
      - nftables: exthdr: fix 4-byte stack OOB write
      - nfnetlink_osf: avoid OOB read
      - one more fix for the garbage collection work from last release

   - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

   - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t

   - handshake: fix null-deref in handshake_nl_done_doit()

   - ip: ignore dst hint for multipath routes to ensure packets are
     hashed across the nexthops

   - phy: micrel:
      - correct bit assignments for cable test errata
      - disable EEE according to the KSZ9477 errata

  Misc:

   - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations

   - Revert "net: macsec: preserve ingress frame ordering", it appears
     to have been developed against an older kernel, problem doesn't
     exist upstream"

* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
  Revert "net: team: do not use dynamic lockdep key"
  net: hns3: remove GSO partial feature bit
  net: hns3: fix the port information display when sfp is absent
  net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
  net: hns3: fix debugfs concurrency issue between kfree buffer and read
  net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
  net: hns3: Support query tx timeout threshold by debugfs
  net: hns3: fix tx timeout issue
  net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  ...

Merge tag 'devicetree-fixes-for-6.6-1' of git://git./linux/kernel/git/robh/linux

Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
  and one fix:

   - Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
     schema

   - Merge Omnivision OV5695 into OV5693 binding

   - Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"

* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
  media: dt-bindings: Convert Omnivision OV7251 to DT schema
  media: dt-bindings: Merge OV5695 into OV5693 binding
  of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY

Merge tag 'pwm/for-6.6-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"

* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
  pwm: lpc32xx: Remove handling of PWM channels
  pwm: atmel: Simplify using devm functions
  dt-bindings: pwm: brcm,kona-pwm: convert to YAML
  pwm: stmpe: Handle errors when disabling the signal
  pwm: stm32: Simplify using devm_pwmchip_add()
  pwm: stm32: Don't modify HW state in .remove() callback
  pwm: Fix order of freeing resources in pwmchip_remove()
  pwm: ntxec: Use device_set_of_node_from_dev()
  pwm: ntxec: Drop a write-only variable from driver data
  pwm: pxa: Don't reimplement of_device_get_match_data()
  pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
  pwm: atmel-tcb: Don't track polarity in driver data
  pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
  pwm: atmel-tcb: Put per-channel data into driver data
  pwm: atmel-tcb: Fix resource freeing in error path and remove
  pwm: atmel-tcb: Harmonize resource allocation order
  pwm: Drop unused #include <linux/radix-tree.h>
  pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
  pwm: Remove outdated documentation for pwmchip_remove()
  pwm: atmel: Enable clk when pwm already enabled in bootloader
  ...

Merge tag 'amd-drm-fixes-6.6-2023-09-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.6-2023-09-06:

amdgpu:
- Display replay fixes
- Fixes for headless boards
- Fix documentation breakage
- RAS fixes
- Handle newer IP discovery tables
- SMU 13.0.6 fixes
- SR-IOV fixes
- Display vstartup fixes
- NBIO 7.9 fixes
- Display scaling mode fixes
- Debugfs power reporting fix
- GC 9.4.3 fixes
- Dirty framebuffer fixes for fbcon
- eDP fixes
- DCN 3.1.5 fix
- Display ODM fixes
- GPU core dump fix
- Re-enable zops property now that IGT test is fixed
- Fix possible UAF in CS code
- Cursor degamma fix

amdkfd:
- HMM fixes
- Interrupt masking fix
- GFX11 MQD fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907033049.7811-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-08-31' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Mark requests for GuC virtual engines to avoid use-after-free (Andrzej).

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZPEGEeP2EwCtx9hM@intel.com

Merge tag 'rtc-6.6' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"Subsystem:

   - Add a way for drivers to tell the core the supported alarm range is
     smaller than the date range. This is not used yet but will be
     useful for the alarmtimers in the next release.

   - fix Wvoid-pointer-to-enum-cast warnings

   - remove redundant of_match_ptr()

   - stop warning for invalid alarms when the alarm is disabled

  Drivers:

   - isl12022: allow setting the trip level for battery level detection

   - pcf2127: add support for PCF2131 and multiple timestamps

   - stm32: time precision improvement, many fixes

   - twl: NVRAM support"

* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
  dt-bindings: rtc: ds3231: Remove text binding
  rtc: wm8350: remove unnecessary messages
  rtc: twl: remove unnecessary messages
  rtc: sun6i: remove unnecessary message
  rtc: stop warning for invalid alarms when the alarm is disabled
  rtc: twl: add NVRAM support
  rtc: pcf85363: Allow to wake up system without IRQ
  rtc: m48t86: add DT support for m48t86
  dt-bindings: rtc: Add ST M48T86
  rtc: pcf2127: remove useless check
  rtc: rzn1: Report maximum alarm limit to rtc core
  rtc: ds1305: Report maximum alarm limit to rtc core
  rtc: tps6586x: Report maximum alarm limit to rtc core
  rtc: cmos: Report supported alarm limit to rtc infrastructure
  rtc: cros-ec: Detect and report supported alarm window size
  rtc: Add support for limited alarm timer offsets
  rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
  MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
  rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
  rtc: omap: Do not check for 0 return after calling platform_get_irq()
  ...

Merge tag 'i3c/for-6.6' of git://git./linux/kernel/git/i3c/linux

Pull i3c updates from Alexandre Belloni:
"Core:
   - Fix SETDASA when static and dynamic adress are equal
   - Fix cmd_v1 DAA exit criteria

  Drivers:
   - svc: allow probing without any device"

* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix probe failure when no i3c device exist
  i3c: master: Fix SETDASA process
  dt-bindings: i3c: Fix description for assigned-address
  i3c: master: svc: Describe member 'saved_regs'
  i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
  i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
  i3c: Explicitly include correct DT includes

Merge tag 'regulator-fix-v6.6-merge-window' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, both driver
  specific - one for a bug that came up in testing, one for a bug due
  to a misreading of the datasheet"

* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps6594-regulator: Fix random kernel crash
  regulator: tps6287x: Fix n_voltages

Merge tag 'spi-fix-v6.6-merge-window' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A couple of fixes for the sun6i driver. The patch to reduce DMA RX to
  single byte width all the time is *hopefully* excessively cautious but
  it's unclear which SoCs are affected so the fix just covers everything
  for safety"

* tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
  spi: sun6i: reduce DMA RX transfer width to single byte