drm/amdgpu: Fix 'fw_name' buffer size to prevent truncations in amdgpu_mes_init_microcode

The snprintf function is used to write a formatted string into fw_name.
The format of the string is "amdgpu/%s_mes%s.bin", where %s is replaced
by the string in ucode_prefix and the second %s is replaced by either
"_2" or "1" depending on the condition pipe == AMDGPU_MES_SCHED_PIPE.

The length of the string "amdgpu/%s_mes%s.bin" is 16 characters plus the
length of ucode_prefix and the length of the string "_2" or "1". The
size of ucode_prefix is 30, so the maximum length of ucode_prefix is 29
characters (since one character is needed for the null terminator).
Therefore, the maximum possible length of the string written into
fw_name is 16 + 29 + 2 = 47 characters.

The size of fw_name is 40, so if the length of the string written into
fw_name is more than 39 characters (since one character is needed for
the null terminator), it will be truncated by the snprintf function, and
thus warnings will be seen.

By increasing the size of fw_name to 50, we ensure that fw_name is
large enough to hold the maximum possible length of the string, so the
snprintf function will not truncate the output.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function ‘amdgpu_mes_init_microcode’:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:66: warning: ‘%s’ directive output may be truncated writing up to 1 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
 1482 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                                                                  ^~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:17: note: ‘snprintf’ output between 16 and 46 bytes into a destination of size 40
 1482 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1483 |                          ucode_prefix,
      |                          ~~~~~~~~~~~~~
 1484 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "" : "1");
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 1 byte into a region of size between 0 and 29 [-Wformat-truncation=]
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                                                                  ^~
 1478 |                          ucode_prefix,
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                                                                 ~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 40
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1478 |                          ucode_prefix,
      |                          ~~~~~~~~~~~~~
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 2 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                                                                  ^~
 1478 |                          ucode_prefix,
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                                                          ~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 18 and 47 bytes into a destination of size 40
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1478 |                          ucode_prefix,
      |                          ~~~~~~~~~~~~~
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:62: warning: ‘_mes.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
 1489 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
      |                                                              ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
 1489 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1490 |                          ucode_prefix);
      |                          ~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix format character cut-off issues in amdgpu_vcn_early_init()

Reducing the size of ucode_prefix to 25 in the amdgpu_vcn_early_init
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c: In function ‘amdgpu_vcn_early_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                                                                  ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                                                                  ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:73: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 2 and 31 [-Wformat-truncation=]
  105 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
      |                                                                         ^~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:25: note: ‘snprintf’ output between 14 and 43 bytes into a destination of size 40
  105 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add socket id parameter for psp query address cmd

And set the socket id.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Cleanup workqueue during module unload

Destroy the high priority workqueue that handles interrupts
during KFD node cleanup.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: range check cp bad op exception interrupts

Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR"

This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.

We'll need to revisit this.

This reverts commit 202260f64519e591b5cd99626e441b6559f571a3.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a NULL check for freeing root PT

This patch adds a NULL check to fix this crash reported during the
freeing of root PT entry:

 BUG: unable to handle page fault for address: ffffc9002d637aa0
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 RIP: 0010:amdgpu_vm_pt_free+0x66/0xe0 [amdgpu]
 PKRU: 55555554
 Call Trace:
 <TASK>
  amdgpu_vm_pt_free_root+0x60/0xa0 [amdgpu]
  amdgpu_vm_fini+0x2cb/0x5d0 [amdgpu]
  ? amdgpu_ctx_mgr_entity_fini+0x53/0x1c0 [amdgpu]
  amdgpu_driver_postclose_kms+0x191/0x2d0 [amdgpu]
  drm_file_free.part.0+0x1e5/0x260 [drm]

Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Christian König <Christian.Koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix TLB flush after unmap for GFX9.4.2

TLB flush after unmap accidentially was removed on
gfx9.4.2. It is to add it back.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refactor code to split devcoredump code

Refractor devcoredump code into new files since its
functionality is expanded further and better to slit
and devcoredump to have its own file.

v2: Fix the build failure caught by arm compiler
of implicit function declaration with #ifdef

v3: squash in fix for implicit declaration error

Cc: Ivan Lipski <ivan.lipski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.277

This version brings along following fixes:
- Fix few problems for DCN35
- Fix a bug which dereferences freed memory
- Enable new interface design for alternate scrambling
- Enhance IPS handshake
- Increase Z8 watermark times
- Fix DML2 problem
- Revert patch which cause regression
- Fix problems for dmub idle power optimization

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add TB_BORROWED_MAX definition

[Why & How]
For DML2 to decouple it from other DML versions.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a bug to dereference already freed old current state memory

[why]
During minimal transition commit, the base state could be freed if it is current state.
This is because after committing minimal transition state, the current state will be
swapped to the minimal transition state and the old current state will be released.
the release could cause the old current state's memory to be freed. However dc
will derefernce this memory when release minimal transition state. Therefore, we
need to retain the old current state until we release minimal transition state.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vpe: power on vpe when hw_init

To fix mode2 reset failure.
Should power on VPE when hw_init.

Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm set pp_dpm_*clk as read only for SRIOV one VF mode

pp_dpm_*clk should be set as read only for SRIOV one VF mode, remove
S_IWUGO flag and _store function of these debugfs in one VF mode.

Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable reallow for idle on DCN35

[Why]
It was previously disabled for stability purposes, but command
submission causes residency issues in IPS video playback.

[How]
Enable the disallow/reallow pattern back. There's additional checks
now in DMCUB that should make this safer stability wise.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable new interface design for alternate scrambling

[why & how]
To enable a new interface so alternate scrambling can be done via
security module.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary hard coded DPM states

[Why]

The hard coded DPM states are only used to fix mismatch states numbers from FW.

[How]

Remove when not needed.

Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add optional optimization for IPS handshake

[Why]
It's possible to skip parts of the eval and exit sequencing if we know
whether DCN is in IPS2 already or if it's committed to going to idle
and not in IPS2.

[How]
Skip IPS2 entry/exit if DMCUB is idle but the IPS2 commit is not set.

Skip the eval delay if DMCUB is already in IPS2 since we know we need
to exit.

These are turned off by default.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Detect and disallow idle reallow during reentrancy

[Why]
Cursor updates can be preempted by queued flips in some DMs.

The synchronization model causes this to occur within the same thread
at an intermediate level when we insert logs into the OS queue.

Since this occurs on the same thread and we're still holding the lock
(recursively) the cache is coherent.

The exit sequence will run twice since we technically haven't finished
the exit the first time, so we need a way to detect and avoid the
reallow in the middle of this call to prevent the hang on the cursor
update that was preempted.

[How]
Keep a counter that tracks the depth of the exit calls. Do not reallow
until the counter is zero.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: increase bb clock for DCN351

[Why and how]

Bounding box clocks for DCN351 should be increased as per request

Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Prevent crash when disable stream

[Why]
Disabling stream encoder invokes a function that no longer exists.

[How]
Check if the function declaration is NULL in disable stream encoder.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase Z8 watermark times.

Increase Z8 watermark times from 210->250us and 320->350us.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change aux_init to apu version

[why]
APU has different refclk as dGPU which is used for AUX_DPHY setup

Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras event id support for ACA

add ras event id support for ACA.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: avoid update aca bank multi times during ras isr

Because the UE Valid MCA count will only be cleared after reset,
in order to avoid repeated counting of the error count,
the aca bank is only updated once during ras isr.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: retrieve umc odecc error count for aca umc v12.0

retrieve umc odecc error count for aca umc v12.0

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Check cgroup when returning DMABuf info

Check cgroup permissions when returning DMA-buf info and
based on cgroup info return the GPU id of the GPU that have
access to the BO.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Added debug prints for zstate_support and StutterPeriod

Added debug prints for zstate_support and StutterPeriod in
dcn35_decide_zstate_support for testing.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Power on VPG memory unconditionally if off

[WHY&HOW]
Even if memory lower power feature policy states that it is disabled,
VPG memory should still be poweerd on if it is currently disabled when
requested.

Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix debug key not working on dml2

[why]
need to apply the debug key check for max displayclk.

Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN sensor value for SMU 14.0.0

This will add VCN sensor value for SMU 14.0.0.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: sync page table freeing with tlb flush

The idea behind this patch is to delay the freeing of PT entry objects
until the TLB flush is done.

This patch:
- Adds a tlb_flush_waitlist in amdgpu_vm_update_params which will keep the
  objects that need to be freed after tlb_flush.
- Adds PT entries in this list in amdgpu_vm_ptes_update after finding
  the PT entry.
- Changes functionality of amdgpu_vm_pt_free_dfs from (df_search + free)
  to simply freeing of the BOs, also renames it to
  amdgpu_vm_pt_free_list to reflect this same.
- Exports function amdgpu_vm_pt_free_list to be called directly.
- Calls amdgpu_vm_pt_free_list directly from amdgpu_vm_update_range.

V2: rebase
V4: Addressed review comments from Christian
    - add only locked PTEs entries in TLB flush waitlist.
    - do not create a separate function for list flush.
    - do not create a new lock for TLB flush.
    - there is no need to wait on tlb_flush_fence exclusively.

V5: Addressed review comments from Christian
    - change the amdgpu_vm_pt_free_dfs's functionality to simple freeing
      of the objects and rename it.
    - add all the PTE objects in params->tlb_flush_waitlist
    - let amdgpu_vm_pt_free_root handle the freeing of BOs independently
    - call amdgpu_vm_pt_free_list directly

V6: Rebase
V7: Rebase
V8: Added a NULL check to fix this backtrace issue:
[  415.351447] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  415.359245] #PF: supervisor write access in kernel mode
[  415.365081] #PF: error_code(0x0002) - not-present page
[  415.370817] PGD 101259067 P4D 101259067 PUD 10125a067 PMD 0
[  415.377140] Oops: 0002 [#1] PREEMPT SMP NOPTI
[  415.382004] CPU: 0 PID: 25481 Comm: test_with_MPI.e Tainted: G           OE     5.18.2-mi300-build-140423-ubuntu-22.04+ #24
[  415.394437] Hardware name: AMD Corporation Sh51p/Sh51p, BIOS RMO1001AS 02/21/2024
[  415.402797] RIP: 0010:amdgpu_vm_ptes_update+0x6fd/0xa10 [amdgpu]
[  415.409648] Code: 4c 89 ff 4d 8d 66 30 e8 f1 ed ff ff 48 85 db 74 42 48 39 5d a0 74 40 48 8b 53 20 48 8b 4b 18 48 8d 43 18 48 8d 75 b0 4c 89 ff <48
> 89 51 08 48 89 0a 49 8b 56 30 48 89 42 08 48 89 53 18 4c 89 63
[  415.430621] RSP: 0018:ffffc9000401f990 EFLAGS: 00010287
[  415.436456] RAX: ffff888147bb82f0 RBX: ffff888147bb82d8 RCX: 0000000000000000
[  415.444426] RDX: 0000000000000000 RSI: ffffc9000401fa30 RDI: ffff888161f80000
[  415.452397] RBP: ffffc9000401fa80 R08: 0000000000000000 R09: ffffc9000401fa00
[  415.460368] R10: 00000007f0cc0000 R11: 00000007f0c85000 R12: ffffc9000401fb20
[  415.468340] R13: 00000007f0d00000 R14: ffffc9000401faf0 R15: ffff888161f80000
[  415.476312] FS:  00007f132ff89840(0000) GS:ffff889f87c00000(0000) knlGS:0000000000000000
[  415.485350] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  415.491767] CR2: 0000000000000008 CR3: 0000000161d46003 CR4: 0000000000770ef0
[  415.499738] PKRU: 55555554
[  415.502750] Call Trace:
[  415.505482]  <TASK>
[  415.507825]  amdgpu_vm_update_range+0x32a/0x880 [amdgpu]
[  415.513869]  amdgpu_vm_clear_freed+0x117/0x250 [amdgpu]
[  415.519814]  amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x18c/0x250 [amdgpu]
[  415.527729]  kfd_ioctl_unmap_memory_from_gpu+0xed/0x340 [amdgpu]
[  415.534551]  kfd_ioctl+0x3b6/0x510 [amdgpu]

V9: Addressed review comments from Christian
    - No NULL check reqd for root PT freeing
    - Free PT list regardless of needs_flush
    - Move adding BOs in list in a separate function

V10: Added Christian's RB
V11: squash in list fix

Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Christian König <Christian.Koenig@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: add smu 14.0.1 vcn and jpeg msg

add new vcn and jpeg msg

v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable smuio v14_0_2 callbacks

Enable smuio v14_0_2_callbacks

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add smuio callback to get gpu clk counter

Add smuio callback to get gpu clk counter

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add smuio v14_0_2 ip block support

Add smuio v14_0_2 ip block support

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add smuio v14_0_2 ip headers (v4)

v1: Add smuio v14_0_2 register offset and shift masks
    header files. (Hawking)
v2: Update smuio v14_0_2 register offset and shift masks
    header files to RE2. (Likun)
v3: Update smuio v14_0_2 register offset and shift masks
    header files to RE2.5. (Likun)
v4: Clean up smuio v14_0_2 ip headers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add umc v12.0.0 deferred error support

add umc v12.0.0 deferred error support.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add aca deferred error type support

add aca deferred error type support

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN sensor value for SMU 13.0.5

This will add VCN sensor value for SMU 13.0.5.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make reset method configurable for RAS poison

Each RAS block has different requirement for gpu reset in poison
consumption handling.
Add support for mmhub RAS poison consumption handling.

v2: remove the mmhub poison support for kfd int v10.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: retire unused aca_bank_report data structure

retire unused aca_bank_report data structure.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Workaround register access in idle race with cursor

[Why]
Cursor update can be pre-empted by a request for setting target flip
submission.

This causes an issue where we're in the middle of the exit sequence
trying to log to DM, but the pre-emption starts another DMCUB
command submission that requires being out of idle.

The DC lock aqusition can fail, and depending on the DM/OS interface
it's possible that the function inserted into this thread must not fail.

This means that lock aqusition must be skipped and exit *must* occur.

[How]
Modify when we consider idle as active. Consider it exited only once
the exit has fully finished.

Consider it as entered prior to actual notification.

Since we're on the same core/thread the cached values are coherent
and we'll see that we still need to exit. Once the cursor update resumes
it'll continue doing the double exit but this won't cause a functional
issue, just a (potential) redundant operation.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN sensor value for yellow carp

This will add VCN sensor value for yellow carp.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update setting EEPROM table version

Use helper function instead of umc callback to set
EEPROM table version.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.276

This version brings along following fixes:
- Clear mpc_tree in init_pipes
- Program pixclk according to dcn revision
- Add stream clock source to DP DTO params
- Enabling urgent latency adjustment for DCN35
- To adjust dprefclk by down spread percentage
- Add debug option for idle reg checks
- Revert few patches which cause regression
- skip forcing odm in minimal transition
- Fix noise issue on HDMI AV mute
- Enable fast update for DCN314
- Enable 2to1 ODM policy for DCN35
- Fix DCN31 underflow problem
- Add the MALL size in the fallback function
- Modify coding style/errors and remove redundant codes
- Add missing registers and offset

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.208.0

 - Add a Replay residency mode which only calcuates the
   entry time based on replay state 0/1 switch.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine aca error cache for umc v12.0

refine aca error cache for umc v12.0

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine aca error cache for sdma v4.4.2

refine aca error cache for sdma v4.4.2

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine aca error cache for xgmi v6.4.0

refine aca error cache for xgmi v6.4.0

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support utcl2 RAS poison query for mmhub

Support the query for both gfxhub and mmhub, also replace
xcc_id with hub_inst.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add utcl2 RAS poison query for mmhub

Add it for mmhub v1.8.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN sensor value for Vangogh

This will drm/amdgpu: add VCN sensor value for Vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clear mpc_tree in init_pipes

[Why]
During init_pipes, otg master is not initialized. So mpc tree is
still configured even if mpc bottom is not active

[How]
For pipes that have tg enabled, check their mpc tree and clear
opp_list if mpc bottom is not active

Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine aca error cache for mmhub v1.8

refine aca error cache for mmhub v1.8

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program pixclk according to dcn revision

[WHY&HOW]
Pixel clock programming should be built per dcn revision, not hardcoded to use
dcn20.

Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add stream clock source to DP DTO params

[WHY&HOW]
Stream clock source is a required parameter for DP DTO programming.

Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement TLB flush fence

The problem is that when (for example) 4k pages are replaced
with a single 2M page we need to wait for change to be flushed
out by invalidating the TLB before the PT can be freed.

Solve this by moving the TLB flush into a DMA-fence object which
can be used to delay the freeing of the PT BOs until it is signaled.

V2: (Shashank)
    - rebase
    - set dma_fence_error only in case of error
    - add tlb_flush fence only when PT/PD BO is locked (Felix)
    - use vm->pasid when f is NULL (Mukul)

V4: - add a wait for (f->dependency) in tlb_fence_work (Christian)
    - move the misplaced fence_create call to the end (Philip)

V5: - free the f->dependency properly

V6: (Shashank)
    - light code movement, moved all the clean-up in previous patch
    - introduce params.needs_flush and its usage in this patch
    - rebase without TLB HW sequence patch

V7:
   - Keep the vm->last_update_fence and tlb_cb code until
     we can fix the HW sequencing (Christian)
   - Move all the tlb_fence related code in a separate function so that
     its easier to read and review

V9: Addressed review comments from Christian
    - start PT update only when we have callback memory allocated

V10:
    - handle device unlock in OOM case (Christian, Mukul)
    - added Christian's R-B

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine aca error cache for gfx v9.4.3

refine aca error cache for gfx 9.4.3

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new api to save error count into aca cache

add new api to save error count into aca cache.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new aca_smu_type support

Add new types to distinguish between ACA error type and smu mca type.

e.g.:
the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank
channel, so add new type 'aca_smu_type' to distinguish aca error type
and smu mca type.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove redundant condition in dcn35_calc_blocks_to_gate()

pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.

Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'

Fixes: 6f8b7565cca4 ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Address kdoc for commit_minimal_transition_state_in_dc_update()

Adds descriptions for 'new_context', 'srf_updates', and
'surface_count', and removes the excess description for 'context'.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'new_context' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'srf_updates' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'surface_count' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Excess function parameter 'context' description in 'commit_minimal_transition_state_in_dc_update'

Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix truncation issues in smu_v13_0_init_microcode

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c: In function ‘smu_v13_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
  108 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                                                    ^~       ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
  108 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove the adev check for NULL

adev is a global data structure and isn't expected
to be NULL and hence removing the redundant adev
check from the devcoredump code.

Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enabling urgent latency adjustment for DCN35

[Why]

Underflow occurs when running netflix in a 4k144 eDP + 4k60 setup.
Increasing DCFCLK or urgent latency watermark fixes the issue. Implementing
this workaround for now while we figure out why this is happenning in DCN.

[How]

Enable urgent latency adjustment and match the reference to existing ASIC
that also see increased latency at low FCLK.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for atom fw version v3_5

Support for atom_firmware_info_v3_5.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Apply retry to IP discovery v2 and v4

To ensure GPU driver touch the local framebuffer until
it is initialized by integrated firmware.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras event id support

add amdgpu ras event id support to better distinguish different
error information sources in dmesg logs.

the following log will be identify by event id:
{event_id} interrupt to inform RAS event
{event_id} ACA logs
{event_id} errors statistic since from current injection/error query
{event_id} errors statistic since from gpu load

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug option for idle reg checks

[Why]
Leave disabled by default due to sequencing issues around power states
where these flags aren't properly reset.

[How]
Allow re-enabling from DC debug option.

Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: trigger flr_work if reading pf2vf data failed

if reading pf2vf data failed 30 times continuously, it means something is
wrong. Need to trigger flr_work to recover the issue.

also use dev_err to print the error message to get which device has
issue and add warning message if waiting IDH_FLR_NOTIFICATION_CMPL
timeout.

Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/admgpu: add vclk and dclk sysfs node for some ASICs

This will add vclk and dclk sysfs node for some ASICs.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN sensor value for SMU 13.0.4

This will add VCN sensor value for SMU 13.0.4.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: skip forcing odm in minimal transition

[why]
In minial transitions state, ODM combine shouldn't be forced as it will
make transition non seamless. The force ODM debug option is to control
the end result not the intermediate transition. So we can temporarily
disable ODM forcing when committing minimal transition state.

[how]
Backup stream ODM forcing option and clear it in minimal transition
state. Once minimal transition state is released, we will restore the
original debug option back.

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing registers and offset

[Why & How]
Registers and offset are missing. Add it back

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Comments adjustments

[Why & How]
This commit just drop some old comments and update a typo in another
one.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct hostvm flag

[Why]
Hostvm should be enabled/disabled accordding to the status of
riommu_active, but hostvm always be disabled on DCN31 which causes
underflow

[How]
Set correct hostvm flag on DCN31

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove legacy code

[Why & How]
Remove legacy code which is unnecessary.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable fast update for DCN314

[Why & How]
Enable legacy fast update for DCN314

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move define to the proper header

[Why & How]
DCN3_16_MIN_COMPBUF_SIZE_KB is defined in the dcn316_resource.c file.
This header fit better in the dcn31_fpu.h together with similar defines.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Check preemption status on all XCDs

This patch adds the following functionality:
- Check the queue preemption status on all XCDs in a partition
  for GFX 9.4.3.
- Update the queue preemption debug message to print the queue
  doorbell id for which preemption failed.
- Change the signature of check preemption failed function to
  return a bool instead of uint32_t and pass the MQD manager
  as an argument.

Suggested-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Rename read_doorbell_id in MQD functions

Rename read_doorbell_id function to a more meaningful name,
implying what it is used for. No functional change.

Suggested-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Use metric table for pcie speed/width

Report pcie link speed/width using metric table in case
of one vf & if pmfw support is available, else report directly from
registers in case of pf. Skip reporting it for other cases.

v2: Skip multi-vf check(Lijo)

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Update SMUv13.0.6 PMFW headers

Update PMFW interface headers for updated metrics table
with pcie link speed and pcie link width

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add the MALL size in the fallback function

[Why & How]
If the driver has issues retrieving the MALL size for the specific
hardware, it might fail since the current value is set to zero. This
commit addresses this issue by adding a simple constant value to give
the drive a chance to start.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct indentations and spaces

[Why & How]
This fixes indentations and adjust spaces for better readability and
code styles.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Delete duplicated function prototypes

[Why & How]
dcn32_smu_transfer_wm_table_dram_2_smu is defined twice so one is
removed. Also adjust prototype orders.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable 2to1 ODM policy for DCN35

[Why & How]
Enable 2to1 ODM policy for DCN35

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove wrong signal from vrr calculation

In some of the merge conflict fixes, one '+' was accidentally left at
the beginning of the line. Fortunately, this did not cause any major
issues since it acted as a number signal. This commit addresses this
issue by removing the extra '+'.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove code duplication

[Why & How]
Remove redundant code

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add the hw_ip version of all IP's

Add all the IP's version information on a SOC to the
devcoredump.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "Set the power_down_on_boot function pointer to null"

This reverts commit 54d9490314af ("drm/amd/display: Set the power_down_on_boot
function pointer to null")

[why & how]
This commit breaks S0i3 entry because DCN does not enter IPS2.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set the power_down_on_boot function pointer to null

[WHY]
Blackscreen hang @ PC EF000025 when trying to wake up from S0i3. DCN
gets powered off due to dc_power_down_on_boot() being called after
timeout.

[HOW]
Setting the power_down_on_boot function pointer to null since we don't
expect the function to be called for APU.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.275

- Support long vblank feature
- Add monitor patch for specific eDP
- Init DPPCLK from SMU on dcn32
- Update odm when ODM combine is changed on an otg master pipe with
  no plane
- Fix idle check for shared firmware state
- Add guards for idle on reg read/write
- Guard cursor idle reallow by DC debug option
- Add debug counters to IPS exit prints
- Add left edge pixel for YCbCr422/420 + ODM pipe split
- Amend coasting vtotal for replay low hz
- Refactor DPP into a component directory
- Set the power_down_on_boot function pointer to null
- Implement update_planes_and_stream_v3 sequence
- Lock all enabled otg pipes even with no planes
- Implement wait_for_odm_update_pending_complete
- Add a dc_state NULL check in dc_state_release
- Backup and restore only on full updates
- Update DMUB flags and definitions
- Return the correct HDCP error code
- Add comments to v_total calculation and drop legacy TODO

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Backup and restore only on full updates

[WHY & HOW]
Since the backup and restore for plane and stream states has
a significant amount of data to copy, we will change the backup
and restore sequence to only take place during full updates.

We will also move the scratch memory to struct dc instead of dc_state
to avoid needing to allocate large amounts of memory every time
we create a new DC state.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement update_planes_and_stream_v3 sequence

[WHY & HOW]
Update planes and stream version 3 separates FULL and FAST updates
to their own sequences. It aims to clean up frequent checks for
update type resulting unnecessary branching in logic flow. It also
adds a new commit minimal transition sequence, which detects the need
for minimal transition based on the actual comparison of current and
new states instead of "predicting" it based on per feature software
policy, i.e. could_mpcc_tree_change_for_active_pipes.

The new commit minimal transition sequence is made universal to any
power saving features that would use extra free pipes such as Dynamic
ODM/MPC Combine, MPO or SubVp. Therefore there is no longer a need to
specially handle compatibility problems with transitions among those
features as they are now transparent to the new sequence.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Skip virt_exchange_init on SDMA poison consumption

Host will initiate an FLR in SDMA poison consumption scenario.
Guest should wait for FLR message to re-init data exchange.

Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Do a basic health check before reset

Check if the device is present in the bus before trying to recover. It
could be that device itself is lost from the bus in some hang
situations.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add comments to v_total calculation and drop legacy TODO

[WHY & HOW]
This commit just adds some simple comments to help understand the
calculation of V total duration for Freesync. Also, remove a legacy TODO
comment from link service type.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DMUB flags and definitions

[WHAT]
- Update replay residency tracing design to support more types
  including tracking PHY and ALPM residency types
- Add commands for Replay frame update count profiling
- Enhance HWFQ with additional flags to allow for more
  optimized IPS low power state residencies
- Add new flag to indicate if a new frame update needed for
  ABM to ramp up into steady state

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>