Arnd Bergmann [Fri, 6 May 2022 20:26:28 +0000 (22:26 +0200)]
Merge tag 'samsung-dt64-5.19-2' of git://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.19, part two
1. Cleanups: unused and undocumented dma-channels and dma-requests.
2. Add clock controllers to ExynosAutov9.
* tag 'samsung-dt64-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: switch UFS clock node in ExynosAutov9
arm64: dts: exynos: switch USI clocks in ExynosAutov9
arm64: dts: exynos: add initial CMU clock nodes in ExynosAutov9
dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
dt-bindings: clock: add clock binding definitions for Exynos Auto v9
arm64: dts: fsd: drop useless 'dma-channels/requests' properties
arm64: dts: exynos: drop useless 'dma-channels/requests' properties
arm64: dts: exynos: move XTCXO clock frequency to board in Exynos Auto v9
Link: https://lore.kernel.org/r/20220506081438.149192-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 6 May 2022 20:24:51 +0000 (22:24 +0200)]
Merge tag 'samsung-dt-5.19-2' of git://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.19, part two
1. Cleanups: unused and undocumented dma-channels and dma-requests.
2. Correct compatible of Samsung EEPROM on S5PV210.
* tag 'samsung-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: drop useless 'dma-channels/requests' properties
ARM: dts: s5pv210: drop useless 'dma-channels/requests' properties
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
Link: https://lore.kernel.org/r/20220506081438.149192-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 6 May 2022 20:23:41 +0000 (22:23 +0200)]
Merge tag 'dt-cleanup-5.19-2' of git://git./linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM DTS for v5.19, part two
Align SPI NOR node names to DT schema and drop unused/undocumented
dma-channels/dma-requests.
* tag 'dt-cleanup-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: socfpga: drop useless 'dma-channels/requests' properties
ARM: dts: zynq-7000: drop useless 'dma-channels/requests' properties
ARM: dts: marvell: align SPI NOR node name with dtschema
ARM: dts: omap: align SPI NOR node name with dtschema
ARM: dts: nuvoton: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220506081438.149192-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 6 May 2022 20:12:37 +0000 (22:12 +0200)]
Merge tag 'dt64-cleanup-5.19' of git://git./linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM64 DTS for v5.19
Align SPI NOR node names and freq-table-hz to DT schema. Drop
unused/undocumented dma-channels/dma-requests.
* tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: broadcom: drop useless 'dma-channels/requests' properties
arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties
arm64: dts: marvell: align SPI NOR node name with dtschema
arm64: dts: microchip: align SPI NOR node name with dtschema
arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS
Link: https://lore.kernel.org/r/20220506081438.149192-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 18:40:26 +0000 (20:40 +0200)]
Merge tag 'omap-for-v5.19/dt-part2-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
More devicetree changes for omaps
Devicetree updates for few boards and more clean-up for make dtbs warnings:
- Updates for am335x-myirtech oscillator and mtd
- Firmware configuration for i2c voltage scaling and IO isolation for am3/4
that are wired for these features
- A series of omap3 clock node clean-up for make dtbs warnings for
unique_unit_address and node_name_chars_strict
- Updates for dma-channel usage to add the generic dma-common properties
* tag 'omap-for-v5.19/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
ARM: dts: dm81xx: use new 'dma-channels/requests' properties
ARM: dts: am33xx: use new 'dma-channels/requests' properties
ARM: dts: Group omap3 CM_CLKSEL1_EMU clocks
ARM: dts: Group omap3 CM_CLKSEL_PER clocks
ARM: dts: Group omap3 CM_ICLKEN_PER clocks
ARM: dts: Group omap3 CM_FCLKEN_PER clocks
ARM: dts: Group omap3 CM_FCLKEN_CAM clocks
ARM: dts: Group omap3 CM_CLKSEL_DSS clocks
ARM: dts: Group omap3 CM_FCLKEN_DSS clocks
ARM: dts: Group omap3 CM_CLKOUT_CTRL clocks
ARM: dts: Group omap3 CM_CLKSEL1_PLL clocks
ARM: dts: Group omap3 CM_CLKSEL_WKUP clocks
ARM: dts: Group omap3 CM_ICLKEN_WKUP clocks
ARM: dts: Group omap3 CM_FCLKEN_WKUP clocks
ARM: dts: Group omap3 CM_CLKSEL_CORE clocks
ARM: dts: Group omap3 CM_ICLKEN3_CORE clocks
ARM: dts: Group omap3 CM_ICLKEN1_CORE clocks
ARM: dts: Group omap3 crypto accelerator clocks
ARM: dts: Group omap3 CM_FCLKEN1_CORE clocks
ARM: dts: Group omap3 CONTROL_DEVCONF1 clocks
...
Link: https://lore.kernel.org/r/pull-1651726643-535261@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 17:56:58 +0000 (19:56 +0200)]
Merge tag 'arm-soc/for-5.19/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs changes for 5.19,
please pull the following:
- Krzysztof fixes the SPI NOR Device Tree node name to comply with the
dtschema
* tag 'arm-soc/for-5.19/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220504210942.1838248-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 14:48:55 +0000 (16:48 +0200)]
Merge tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.19, please pull the following:
- Oleksij fixes the ethernet node name for the USB Ethernet adapter on
BCM283x (Raspberry Pi 1/2/3) platforms
- Kuldeep fixes the PL022 SPI controller clock names to conform to the
binding
- Rafal updates the various BCM5301X (Northstar) Device Tree include
files to be dtsschema conforming for pinctrl, NAND
- Arinc adds the Asus RT-AC88U binding, removes some unnecessary
properties of the Ethernet switch DT node, populates the correct PHY
interface for port 5 of the switch, adds support for fetching the MAC
address from the NVMEM provider and finally disables gmac0 on that
device which is unused
- Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio
line names conforming to the printed circuit board layout
- Krzysztof updates various Broadcom DTS files to have a conforming SPI
nor Device Tree node
- Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2
wireless routers based on the BCM4708 SoC
- William adds support for the BCM47622 ARMv7 Broadband SoC and provides
a basic DTS to boot upstream Linux on such a system
* tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
ARM: dts: add dts files for bcmbca soc 47622
dt-bindings: arm: add bcmbca device tree binding document
ARM: dts: bcm283x: Align ETH_CLK GPIO line name
ARM: dts: bcm283x: Remove gpio line name NC
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U
ARM: dts: broadcom: align SPI NOR node name with dtschema
dt-bindings: arm: bcm: add bindings for Asus RT-AC88U
ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
dt-bindings: arm: bcm: create new description for BCM53016
dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings
ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U
ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U
ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U
ARM: dts: BCM5301X: Fix DTC warning for NAND node
ARM: dts: BCM5301X: Update pin controller node name
...
Link: https://lore.kernel.org/r/20220504210942.1838248-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 14:45:50 +0000 (16:45 +0200)]
Merge tag 'juno-updates-5.19' of git://git./linux/kernel/git/sudeep.holla/linux into arm/dt
Arm FVP/Juno device tree updates for v5.19
The main and bulk of the change is the addition of new platform
Arm corstone1000(both FVP and FPGA versions). Also, there are
addition of Coresight Cross Trigger Interface(CTI) support on Juno,
fix for incorrect SCMI power domain IDs, addition of virtio-rng
on FVP which is default disabled as it works only on latest versions
of the FVP model.
Other miscellanous changes include dropping of useless
'dma-channels/requests' properties and updating virtio device
node names as per dtschema.
* tag 'juno-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Drop useless 'dma-channels/requests' properties
arm64: dts: fvp: Align virtio device node names with dtschema
arm64: dts: fvp: Add virtio-rng support
arm64: dts: Add Arm corstone1000 platform support
dt-bindings: Add Arm corstone1000 platform
arm64: dts: juno: add CTI entries to device tree
arm64: dts: juno: Fix SCMI power domain IDs for ETF and CS funnel
Link: https://lore.kernel.org/r/20220504112917.3492009-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 5 May 2022 14:44:18 +0000 (16:44 +0200)]
Merge tag 'stm32-dt-for-v5.19-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Chanho Park [Wed, 4 May 2022 07:51:54 +0000 (16:51 +0900)]
arm64: dts: exynos: switch UFS clock node in ExynosAutov9
Use cmu_fsys's clock node instead of dummy UFS clock node.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-13-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Chanho Park [Wed, 4 May 2022 07:51:53 +0000 (16:51 +0900)]
arm64: dts: exynos: switch USI clocks in ExynosAutov9
Use CMU clock nodes instead of dummy fixed-rate-clock.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-12-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Chanho Park [Wed, 4 May 2022 07:51:52 +0000 (16:51 +0900)]
arm64: dts: exynos: add initial CMU clock nodes in ExynosAutov9
Add cmu_top, cmu_busmc, cmu_core, cmu_fsys and peric0/c1/s clock nodes.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-11-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski [Thu, 5 May 2022 07:03:42 +0000 (09:03 +0200)]
Merge tag 'samsung-dt-bindings-clk-exynosautov9-5.19' into next/dt64
dt-bindings for Samsung ExynosAutov9 clock controllers for v5.19
The Devicetree bindings for Samsung ExynosAutov9 clock controllers.
Chanho Park [Wed, 4 May 2022 07:51:44 +0000 (16:51 +0900)]
dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
Add dt-schema for Exynos Auto v9 SoC clock controller.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504075154.58819-3-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Chanho Park [Wed, 4 May 2022 07:51:43 +0000 (16:51 +0900)]
dt-bindings: clock: add clock binding definitions for Exynos Auto v9
Add device tree clock binding definitions for below CMU blocks.
- CMU_TOP
- CMU_BUSMC
- CMU_CORE
- CMU_FYS2
- CMU_PERIC0 / C1
- CMU_PERIS
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-2-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Alexandre Torgue [Fri, 22 Apr 2022 15:09:52 +0000 (17:09 +0200)]
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:
-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Fri, 22 Apr 2022 15:09:51 +0000 (17:09 +0200)]
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:
-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Alexandre Torgue [Fri, 22 Apr 2022 15:09:50 +0000 (17:09 +0200)]
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
Enable optee and SCMI clocks/reset protocols support.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Fri, 22 Apr 2022 15:09:48 +0000 (17:09 +0200)]
dt-bindings: reset: stm32mp15: rename RST_SCMI define
As we only have one SCMI instance, it's not necessary to add an index to
the name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Alexandre Torgue [Fri, 22 Apr 2022 15:09:47 +0000 (17:09 +0200)]
dt-bindings: clock: stm32mp15: rename CK_SCMI define
As we only have one SCMI instance, it's not necessary to add an index to
the name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Alexandre Torgue [Fri, 22 Apr 2022 15:09:46 +0000 (17:09 +0200)]
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
In case of "st,stm32mp1-rcc-secure" (stm32mp1 clock driver with RCC
security support hardened), "clocks" and "clock-names" describe oscillators
and are required.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Marek Vasut [Sun, 10 Apr 2022 22:05:14 +0000 (00:05 +0200)]
dt-bindings: rcc: Add optional external ethernet RX clock properties
Describe optional external ethernet RX clock in the DT binding
to fix dtbs_check warnings like:
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: rcc@
50000000: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Rob Herring <robh+dt@kernel.org>
To: devicetree@vger.kernel.org
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220410220514.21779-1-marex@denx.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:18:58 +0000 (14:18 +0200)]
arm64: dts: broadcom: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:18:56 +0000 (14:18 +0200)]
arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:18:55 +0000 (14:18 +0200)]
ARM: dts: socfpga: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:18:54 +0000 (14:18 +0200)]
ARM: dts: zynq-7000: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220430121902.59895-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:19:00 +0000 (14:19 +0200)]
ARM: dts: exynos: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:18:59 +0000 (14:18 +0200)]
ARM: dts: s5pv210: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:19:02 +0000 (14:19 +0200)]
arm64: dts: fsd: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:19:01 +0000 (14:19 +0200)]
arm64: dts: exynos: drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 3 May 2022 09:26:31 +0000 (11:26 +0200)]
arm64: dts: exynos: move XTCXO clock frequency to board in Exynos Auto v9
The external oscillator - XTCXO - is an input to the SoC. It is defined
in the Exynos Auto v9 SoC DTSI, because all boards will provide it and
clock controller bindings expect it, however the actual frequency of the
clock should be determined by the board.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220503092631.174713-1-krzysztof.kozlowski@linaro.org
SHIMAMOTO Takayoshi [Thu, 21 Apr 2022 15:10:54 +0000 (00:10 +0900)]
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with
- BCM4708A0
- 128MiB NAND flash
- 2T2R 11ac/a/b/g/n Wi-Fi
- 4x 10/100/1000M ethernet switch
- 1x USB 3.0 port
WZR-1166DHP and WZR-1166DHP2 have different memory capacity.
WZR-1166DHP
- 512 MiB DDR2 SDRAM
WZR-1166DHP2
- 256 MiB DDR2 SDRAM
These hardware components are very similar to the WZR-1750DHP
except for the number of antennas.
Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Krzysztof Kozlowski [Tue, 26 Apr 2022 18:34:43 +0000 (20:34 +0200)]
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback,
according to the AT24 EEPROM bindings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220426183443.243113-1-krzysztof.kozlowski@linaro.org
Fabien Dessenne [Tue, 3 May 2022 09:41:33 +0000 (11:41 +0200)]
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
The PA13 user button is connected to the PA13 pin of the stm32mp135f-dk
board. It requires an internal pull-up configuration.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fabien Dessenne [Tue, 3 May 2022 09:41:24 +0000 (11:41 +0200)]
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
The blue led (Linux heartbeat) is connected to the PA14 pin of the
stm32mp135f-dk board.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fabien Dessenne [Tue, 3 May 2022 09:06:21 +0000 (11:06 +0200)]
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
Add interrupt-parent property in pinctrl node to use GPIO as IRQ.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Arnd Bergmann [Tue, 3 May 2022 13:29:13 +0000 (15:29 +0200)]
Merge tag 'amlogic-arm-dt-for-v5.19' of git://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM DT changes for v5.19:
- align SPI NOR node name with dtschema
* tag 'amlogic-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/fbd7cbe7-1fe9-7009-37d6-c01b15c93032@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 3 May 2022 13:27:58 +0000 (15:27 +0200)]
Merge tag 'amlogic-arm64-dt-for-v5.19' of git://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v5.19:
- DTS makefile alpsa sort
- align SPI NOR node name with dtschema
- add support for S4 power domain, gpio_intc, pinctrl
- updates and fixes for JetHub D1/H1 boards
* tag 'amlogic-arm64-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson: alpa sort the board Makefile
arm64: dts: meson: align SPI NOR node name with dtschema
arm64: dts: add support for S4 power domain controller
arm64: dts: meson-s4: add gpio_intc node
arm64: dts: meson-s4: add pinctrl node
arm64: meson: update WiFi SDIO in dts for JetHub D1
arm64: meson: update SDIO voltage in dts for JetHub D1
arm64: meson: dts: update serial alias in dts for JetHub D1
arm64: meson: add dts bluetooth node for JetHub H1
Link: https://lore.kernel.org/r/1e5179ab-2d92-0d64-c57b-e002ec2f0806@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 3 May 2022 13:27:33 +0000 (15:27 +0200)]
Merge tag 'ux500-dts-v5.19' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS updates for the v5.19 kernel cycle:
- New devicetree for Codina TMO (SGH-T599).
- Add the Amastaos proximity sensor to the Codina.
- Add line impedance per machine to the Fuel Gauge
nodes.
- Add GPS to Janice, Skomer and Codina.
- Add NFC to the Codina for GT-I8160P.
- Some janitorial like clock names.
* tag 'ux500-dts-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Add GPS to the Codina
ARM: dts: ux500: Add NFC to the Codina
ARM: dts: ux500: Add GPS to Skomer device tree
ARM: dts: ux500: Add GPS to Janice device tree
ARM: dts: ux500: Add line impedance to fuel gauge
ARM: dts: ux500: Register Amstaos proximity sensor
ARM: dts: ux500: Add Codina TMO device tree
dt-bindings: arm: ux500: Document Codina-TMO
ARM: dts: ste-dbx: Update spi clock-names property
Link: https://lore.kernel.org/r/CACRpkdYngWscqak5phKm58O2GF0RmVETgwW4NCKTBiASdaEcyg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 3 May 2022 13:26:13 +0000 (15:26 +0200)]
Merge tag 'omap-for-v5.19/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps
Devicetree changes for omaps:
- A series of changes to fix devicetree binding check warnings for omaps
the the use of clock-output-names and clksel bindings
- Update Ethernet node names for omaps
- Pinctrl updates for logicpd-som-lv
- A series of updates for am335x-guardian
- Regulator range update for am335x-baltos
Note that this branch is based on a upstream IOMMU fix as it's needed for
booting on some SoCs.
* tag 'omap-for-v5.19/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits)
ARM: dts: am335x-baltos: update MPU regulator range
ARM: dts: am335x: Guardian: Update comments
ARM: dts: am335x: Guardian: Add gpio line manes
ARM: dts: am335x: Guardian: Update interface pinmux
ARM: dts: am335x: Guardian: Disable DMA property of USB1
ARM: dts: am335x: Guardian: Enable UART port two
ARM: dts: am335x: Guardian: Update backlight parameter
ARM: dts: am335x: Guardian: Add lcd port
ARM: dts: am335x: Guardian: Update regulator node name
ARM: dts: am335x: Guardian: Update beeper label
ARM: dts: am335x: Guardian: Update life led
ARM: dts: am335x: Guardian: Remove mmc status led
ARM: dts: am335x: Guardian: Disable poweroff support from RTC
ARM: dts: am335x: Guardian: Add keypad
ARM: dts: am335x: Guardian: Rename power button label
ARM: dts: am335x: Guardian: Update NAND partition table
ARM: dts: logicpd-som-lv: Move pinmuxing to peripheral nodes
ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
ARM: dts: Drop custom clkctrl compatible and update omap5 l4per
ARM: dts: Add clock-output-names for omap5
...
Link: https://lore.kernel.org/r/pull-1650961799-428630@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 3 May 2022 13:25:36 +0000 (15:25 +0200)]
Merge tag 'bindings-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Clock binding updates for omaps
Minor clock binding changes to document clock-output-names usage for omaps
so we can fix lots of related dt bindings check warnings. The related driver
changes already got merged for v5.18.
* tag 'bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
dt-bindings: clock: ti: Add clock-output-names for TI composite clocks
dt-bindings: clock: ti: Add clock-output-names for clockctrl
dt-bindings: omap: Add clock-output-names and #clock-cells
Link: https://lore.kernel.org/r/pull-1650961799-428630@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 3 May 2022 13:25:04 +0000 (15:25 +0200)]
Merge tag 'renesas-dt-bindings-for-v5.19-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.19
- Document support for the new RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board.
* tag 'renesas-dt-bindings-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas RZ/G2UL SMARC EVK
dt-bindings: power: renesas,rzg2l-sysc: Document RZ/G2UL SoC
Link: https://lore.kernel.org/r/cover.1650638516.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 3 May 2022 13:24:08 +0000 (15:24 +0200)]
Merge tag 'renesas-arm-dt-for-v5.19-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.19
- ADC, SDHI, CAN-FD, I2C, QSPI, timer, watchdog, sound, USB, SPI, GPU,
cpufreq, and thermal support for the RZ/V2L SoC, and the RZ/V2L
SMARC EVK development board,
- USB, I2C, Audio, NOR Flash, timer, SPI support for RZ/G2LC SMARC EVK
development board,
- Can-FD support for the R-Car M30W+ and V3U SoCs, and the Falcon
development board,
- I2C and GPIO support for the R-Car S4-8 SoC,
- I2C EEPROM support for the Falcon development board,
- SPI Multi I/O Bus Controller (RPC-IF) support for the R-Car H3,
M3-W(+), M3-N, E3, and D3 SoCs,
- RPC HyperFlash support for the Draak, Ebisu, Salvator-X(S), and ULCB
development boards,
- Initial support (UART, DMAC, pin control, SDHI, eMMC, Ethernet) for
the RZ/G2UL SoC, and the RZ/G2UL SMARC EVK development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (55 commits)
ARM: dts: r9a06g032: Drop "arm,cortex-a7-timer" from timer node
arm64: dts: renesas: r8a779f0: Add GPIO nodes
arm64: dts: renesas: rzg2ul-smarc-som: Enable Ethernet on SMARC platform
arm64: dts: renesas: rzg2ul-smarc-som: Enable eMMC on SMARC platform
arm64: dts: renesas: rzg2ul-smarc: Enable microSD on SMARC platform
arm64: dts: renesas: r9a07g043: Add GbEthernet nodes
arm64: dts: renesas: r9a07g043: Add SDHI nodes
arm64: dts: renesas: rzg2ul-smarc: Add scif0 and audio clk pins
arm64: dts: renesas: r9a07g043: Fillup the pinctrl stub node
arm64: dts: renesas: Add initial device tree for RZ/G2UL Type-1 SMARC EVK
arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC
arm64: dts: renesas: rzg2l-smarc: Move gpios property of vccq_sdhi1 from common dtsi
arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1 on carrier board
arm64: dts: renesas: ulcb: Add RPC HyperFlash device node
arm64: dts: renesas: salvator-common: Add RPC HyperFlash device node
arm64: dts: renesas: ebisu: Add RPC HyperFlash device node
arm64: dts: renesas: draak: Add RPC HyperFlash device node
arm64: dts: renesas: rcar-gen3: Add RPC device nodes
arm64: dts: renesas: rcar-gen4: Add interrupt properties to watchdog nodes
arm64: dts: renesas: rzg2: Add interrupt properties to watchdog nodes
...
Link: https://lore.kernel.org/r/cover.1650638505.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Tue, 3 May 2022 06:52:01 +0000 (08:52 +0200)]
ARM: dts: dm81xx: use new 'dma-channels/requests' properties
The '#dma-channels' and '#dma-requests' properties were deprecated in
favor of these defined by generic dma-common DT bindings. Add new
properties while keeping old ones for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <
20220503065201.51818-7-krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Krzysztof Kozlowski [Tue, 3 May 2022 06:51:59 +0000 (08:51 +0200)]
ARM: dts: am33xx: use new 'dma-channels/requests' properties
The '#dma-channels' and '#dma-requests' properties were deprecated in
favor of these defined by generic dma-common DT bindings. Add new
properties while keeping old ones for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <
20220503065201.51818-5-krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_CLKSEL1_EMU clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_CLKSEL_PER clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_ICLKEN_PER clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_FCLKEN_PER clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_FCLKEN_CAM clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_CLKSEL_DSS clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_FCLKEN_DSS clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_CLKOUT_CTRL clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_CLKSEL1_PLL clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_CLKSEL_WKUP clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_ICLKEN_WKUP clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_FCLKEN_WKUP clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_CLKSEL_CORE clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_ICLKEN3_CORE clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_ICLKEN1_CORE clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 crypto accelerator clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CM_FCLKEN1_CORE clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CONTROL_DEVCONF1 clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 29 Apr 2022 06:57:36 +0000 (09:57 +0300)]
ARM: dts: Group omap3 CONTROL_DEVCONF0 clocks
The clksel related registers on omap3 cause unique_unit_address and
node_name_chars_strict warnings with the W=1 or W=2 make flags enabled.
With the clock drivers updated, we can now avoid most of these warnings
by grouping the TI component clocks using the TI clksel binding, and
with the use of clock-output-names property to avoid non-standard node
names for the clocks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Mon, 2 May 2022 02:15:09 +0000 (19:15 -0700)]
ARM: dts: am43xx: Add i2c voltage scaling firmware to wkup_m3_ipc
Add appropriate firmware-name property for all am43xx platforms.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[dfustini: change property from 'ti,scale-data-fw' to 'firmware-name']
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Message-Id: <
20220502021508.
1342869-4-dfustini@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Mon, 2 May 2022 02:15:08 +0000 (19:15 -0700)]
ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipc
Add appropriate firmware-name property for all am33xx platforms.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[dfustini: change property from 'ti,scale-data-fw' to 'firmware-name']
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Message-Id: <
20220502021508.
1342869-3-dfustini@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Mon, 2 May 2022 02:15:07 +0000 (19:15 -0700)]
ARM: dts: am437x-gp-evm: Enable wkup_m3 control of IO isolation
With this flag wkup_m3 is able to control IO isolation during
suspend on the board.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Message-Id: <
20220502021508.
1342869-2-dfustini@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Oleksij Rempel [Tue, 26 Apr 2022 07:35:11 +0000 (09:35 +0200)]
ARM: dts: stm32: add support for Protonic PRTT1x boards
This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication.
- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Oleksij Rempel [Tue, 26 Apr 2022 07:35:10 +0000 (09:35 +0200)]
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
Add spi1-1 pingroup as preparation for Protonic PRTT1C board.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Oleksij Rempel [Tue, 26 Apr 2022 07:35:09 +0000 (09:35 +0200)]
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
Add compatible for wfm200 antenna configuration variant for Protonic PRTT1C
board.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Oleksij Rempel [Tue, 26 Apr 2022 07:35:08 +0000 (09:35 +0200)]
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
This boards are based on STM32MP151AAD3 and use 10BaseT1L for
communication.
- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Krzysztof Kozlowski [Mon, 25 Apr 2022 14:04:36 +0000 (16:04 +0200)]
dt-bindings: arm: stm32: correct blank lines
Correct blank lines to precesily separate entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Krzysztof Kozlowski [Mon, 25 Apr 2022 14:04:35 +0000 (16:04 +0200)]
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
The bindings for DH STM32MP1 SoM boards allows invalid combinations,
e.g. st,stm32mp153 SoC on a dh,stm32mp157c-dhcom-som SoM.
Split the enums to properly match valid setups.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Krzysztof Kozlowski [Sat, 30 Apr 2022 12:18:57 +0000 (14:18 +0200)]
arm64: dts: juno: Drop useless 'dma-channels/requests' properties
The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.
Another reason is that the number of requests also does not seem right
(should be 8).
Link: https://lore.kernel.org/r/20220430121902.59895-5-krzysztof.kozlowski@linaro.org
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Alexander Shiyan [Wed, 27 Apr 2022 08:19:14 +0000 (11:19 +0300)]
ARM: dts: am335x-myirtech: Update NAND default partition table layout
This patch replaces the legacy partition table layout with a modern style.
As an additional change, we are reserving space for three backup MLO entries
and increasing space for the main bootloader.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Message-Id: <
20220427081914.6773-2-eagle.alexander923@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Alexander Shiyan [Wed, 27 Apr 2022 08:19:13 +0000 (11:19 +0300)]
ARM: dts: am335x-myirtech: Add an external clock oscillator for CPU RTC
The CPU RTC has an external crystal, so to keep time, let's define
it for devicetree.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Message-Id: <
20220427081914.6773-1-eagle.alexander923@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Walleij [Thu, 14 Apr 2022 21:40:16 +0000 (23:40 +0200)]
ARM: dts: ux500: Add GPS to the Codina
The Codina has a Broadcom BCM4751 GPS chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Krzysztof Kozlowski [Thu, 7 Apr 2022 14:32:34 +0000 (16:32 +0200)]
arm64: dts: marvell: align SPI NOR node name with dtschema
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407143234.295426-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 7 Apr 2022 14:32:23 +0000 (16:32 +0200)]
arm64: dts: microchip: align SPI NOR node name with dtschema
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220407143223.295344-2-krzysztof.kozlowski@linaro.org
Sudeep Holla [Mon, 25 Apr 2022 13:55:24 +0000 (14:55 +0100)]
arm64: dts: fvp: Align virtio device node names with dtschema
Align the virtio mmio device tree node names with the schema to avoid any
schema warnings.
Link: https://lore.kernel.org/r/20220425135524.1077986-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Diego Sueiro [Thu, 21 Apr 2022 14:35:21 +0000 (15:35 +0100)]
arm64: dts: fvp: Add virtio-rng support
The virtio-rng is available from FVP_Base_RevC-2xAEMvA version 11.17,
so add the devicetree node to support it. It is disabled by default to
avoid any issues with models that doesn't support it.
Link: https://lore.kernel.org/r/ac3be672c636091ee1e079cadce776b1fb7e0b2e.1650543392.git.diego.sueiro@arm.com
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Rui Miguel Silva [Fri, 8 Apr 2022 13:19:22 +0000 (14:19 +0100)]
arm64: dts: Add Arm corstone1000 platform support
Corstone1000 is a platform from arm, which includes pre
verified Corstone SSE710 sub-system that combines Cortex-A and
Cortex-M processors [0].
These device trees contains the necessary bits to support the
Corstone 1000 FVP (Fixed Virtual Platform) [1] and the
FPGA MPS3 board Cortex-A35 implementation at Cortex-A35 host
side of this platform. [2]
0: https://developer.arm.com/documentation/102360/0000
1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
2: https://developer.arm.com/documentation/dai0550/c/
Link: https://lore.kernel.org/r/20220408131922.3864348-3-rui.silva@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Rui Miguel Silva [Fri, 8 Apr 2022 13:19:21 +0000 (14:19 +0100)]
dt-bindings: Add Arm corstone1000 platform
Add bindings to describe the FPGA in a prototyping board
(MPS3) implementation and the Fixed Virtual Platform
implementation of the ARM Corstone1000 platform.
Link: https://lore.kernel.org/r/20220408131922.3864348-2-rui.silva@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
William Zhang [Wed, 13 Apr 2022 19:26:43 +0000 (12:26 -0700)]
ARM: dts: add dts files for bcmbca soc 47622
Add dts for ARMv7 based broadband SoC BCM47622. bcm47622.dtsi is the
SoC description dts header and bcm947622.dts is a simple dts file for
Broadcom BCM947622 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Wed, 13 Apr 2022 19:26:41 +0000 (12:26 -0700)]
dt-bindings: arm: add bcmbca device tree binding document
Add arch bcmbca device tree binding document for Broadcom ARM based
broadband SoC chipsets. In this change, only BCM47622 is added. Other
chipsets will be added in the future.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Arnd Bergmann [Thu, 21 Apr 2022 15:14:52 +0000 (17:14 +0200)]
Merge tag 'samsung-dt64-5.19' of git://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.19
1. Cleanup: move aliases of board-related features to board in
Exynos850.
2. Add specific compatibles to Multi Core Timer to allow stricter DT
schema matching.
* tag 'samsung-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: tesla: add a specific compatible to MCT on FSD
arm64: dts: exynos: add a specific compatible to MCT
arm64: dts: exynos: move aliases to board in Exynos850
Link: https://lore.kernel.org/r/20220420072152.11696-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Apr 2022 15:10:01 +0000 (17:10 +0200)]
Merge tag 'samsung-dt-5.19' of git://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.19
1. Several DT schema related changes to make DTBs passing schema checks:
EHCI/OHCI/DMA/Ethernet node names, DMA channels order, USB-like
compatibles.
2. Add specific compatibles to Multi Core Timer to allow stricter DT
schema matching.
3. Cleanup from deprecated bindings:
- Remove deprecated unit-address workaround for Exynos5422 Odroid XU3
LPDDR3 memory timings.
- Do not use unit-address (and SFR region) in Exynos5250 MIPI phy in
favor of syscon node (unit-address deprecated in 2016).
- Use standard generic PHYs for EHCI/OHCI device in S5PV210.
4. Fix inverted SPI CS (thus blank panel) on S5PV210 Aries boards.
5. Correct Bluetooth interupt name on S5PV210 Aries boards.
* tag 'samsung-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: align DMA channels with dtschema
ARM: dts: s5pv210: Adjust DMA node names to match spec
ARM: dts: s5pv210: Adjust memory reg entries to match spec
ARM: dts: s5pv210: Correct interrupt name for bluetooth in Aries
ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries
ARM: dts: s5pv210: Use standard arrays of generic PHYs for EHCI/OHCI device
ARM: dts: s5pv210: align EHCI/OHCI nodes with dtschema
ARM: dts: exynos: align EHCI/OHCI nodes with dtschema on Exynos4
ARM: dts: exynos: drop deprecated SFR region from MIPI phy
ARM: dts: exynos: add a specific compatible to MCT
ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
ARM: dts: exynos: fix compatible strings for Ethernet USB devices
ARM: dts: exynos: fix ethernet node name for different odroid boards
Link: https://lore.kernel.org/r/20220420072152.11696-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Apr 2022 15:08:54 +0000 (17:08 +0200)]
Merge tag 'dt-cleanup-5.19' of git://git./linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM DTS for v5.19
Align node names and unit addresses to DT schema and DT coding style in
nspire, ox820 and socfpga.
* tag 'dt-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: socfpga: align interrupt controller node name with dtschema
ARM: dts: ox820: align interrupt controller node name with dtschema
ARM: dts: nspire: use lower case hex addresses in node unit addresses
Link: https://lore.kernel.org/r/20220420072152.11696-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Yegor Yefremov [Tue, 19 Apr 2022 14:39:23 +0000 (16:39 +0200)]
ARM: dts: am335x-baltos: update MPU regulator range
Update the max MPU voltage range to align with the maximum
possible value allowed in the operating-points table, which is max
target voltage of 132500 uV + 2%.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Message-Id: <
20220419143923.25196-1-yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:13 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Update comments
* Add comment to improve readability
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-16-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:12 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Add gpio line manes
* assign name to gpio line
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-15-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:11 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Update interface pinmux
* Update interface pinmux for
- poweroff button
- battery and coincell enable
- ASP and Miraculix
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-14-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:10 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Disable DMA property of USB1
* Dispble DMA property of USB1
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-13-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:09 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Enable UART port two
* Add support for uart2 port
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-12-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:08 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Update backlight parameter
* Update default brightness and dimming frequency
* Enable current sink, while initialization
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-11-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:07 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Add lcd port
* Add port to the node lcdc
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-10-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:06 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Update regulator node name
* Update mmcsd voltage regulator node name
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-9-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:05 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Update beeper label
* Update lable pwm to guardian beeper
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-8-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:04 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Update life led
* update life led label and pin number
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-7-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gireesh Hiremath [Fri, 25 Mar 2022 10:06:03 +0000 (10:06 +0000)]
ARM: dts: am335x: Guardian: Remove mmc status led
* MMC presence indicater LED removed from Guardian Board
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <
20220325100613.1494-6-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
projects / linux.git / log