target/sparc: Remove FSR_FTT_NMASK, FSR_FTT_CEXC_NMASK

These macros are no longer used.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-23-richard.henderson@linaro.org>

target/sparc: Split fcc out of env->fsr

Represent each fcc field separately from the rest of fsr.
This vastly simplifies floating-point comparisons.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-22-richard.henderson@linaro.org>

target/sparc: Remove cpu_fsr

Drop this field as a tcg global, loading it explicitly in the
few places required.  This means that all FPop helpers may
once again be TCG_CALL_NO_WG.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-21-richard.henderson@linaro.org>

target/sparc: Split cexc and ftt from env->fsr

These two fields are adjusted by all FPop insns.
Having them separate makes it easier to set without masking.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-20-richard.henderson@linaro.org>

target/sparc: Merge check_ieee_exceptions with FPop helpers

If an exception is to be raised, the destination fp register
should be unmodified.  The current implementation is incorrect,
in that double results will be written back before calling
gen_helper_check_ieee_exceptions, despite the placement of
gen_store_fpr_D, since gen_dest_fpr_D returns cpu_fpr[].

We can simplify the entire implementation by having each
FPOp helper call check_ieee_exceptions.  For the moment this
requires that all FPop helpers write to the TCG global cpu_fsr,
so remove TCG_CALL_NO_WG from the DEF_HELPER_FLAGS_*.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-19-richard.henderson@linaro.org>

target/sparc: Clear cexc and ftt in do_check_ieee_exceptions

Don't do the clearing explicitly before each FPop,
rather do it as part of the rest of exception handling.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-18-richard.henderson@linaro.org>

target/sparc: Split ver from env->fsr

This field is read-only.  It is easier to store it separately
and merge it only upon read.

While we're at it, use FSR_VER_SHIFT to initialize fpu_version.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-17-richard.henderson@linaro.org>

target/sparc: Introduce cpu_get_fsr, cpu_put_fsr

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-16-richard.henderson@linaro.org>

target/sparc: Remove qt0, qt1 temporaries

These are no longer used for passing data to/from helpers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-15-richard.henderson@linaro.org>

target/sparc: Use i128 for Fdmulq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-14-richard.henderson@linaro.org>

target/sparc: Use i128 for FdTOq, FxTOq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-13-richard.henderson@linaro.org>

target/sparc: Use i128 for FsTOq, FiTOq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-12-richard.henderson@linaro.org>

target/sparc: Use i128 for FCMPq, FCMPEq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-11-richard.henderson@linaro.org>

target/sparc: Use i128 for FqTOd, FqTOx

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-10-richard.henderson@linaro.org>

target/sparc: Use i128 for FqTOs, FqTOi

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-9-richard.henderson@linaro.org>

target/sparc: Use i128 for FADDq, FSUBq, FMULq, FDIVq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-8-richard.henderson@linaro.org>

target/sparc: Use i128 for FSQRTq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-7-richard.henderson@linaro.org>

target/sparc: Inline FNEG, FABS

These are simple bit manipulation insns.
Begin using i128 for float128.
Implement FMOVq with do_qq.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-6-richard.henderson@linaro.org>

target/sparc: Introduce gen_{load,store}_fpr_Q

Use them for trans_FMOVq.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-5-richard.henderson@linaro.org>

target/sparc: Remove gen_dest_fpr_F

Replace with tcg_temp_new_i32.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-4-richard.henderson@linaro.org>

target/sparc: Use tcg_gen_qemu_{ld, st}_i128 for ASI_M_BFILL

Align the operation to the 32-byte cacheline.
Use 2 i128 instead of 4 i64.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-3-richard.henderson@linaro.org>

target/sparc: Use tcg_gen_qemu_{ld, st}_i128 for ASI_M_BCOPY

Align the operation to the 32-byte cacheline.
Use 2 pair of i128 instead of 8 pair of i32.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-2-richard.henderson@linaro.org>

tcg/loongarch64: Set vector registers call clobbered

Because there are more call clobbered registers than
call saved registers, we begin with all registers as
call clobbered and then reset those that are saved.

This was missed when we introduced the LSX support.

Cc: qemu-stable@nongnu.org
Fixes: 16288ded944 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2136
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240201233414.500588-1-richard.henderson@linaro.org>

tests/tcg: Fix the /proc/self/mem probing in the PROT_NONE gdbstub test

The `if not probe_proc_self_mem` check never passes, because
probe_proc_self_mem is a function object, which is a truthy value.
Add parentheses in order to perform a function call.

Fixes: dc84d50a7f9b ("tests/tcg: Add the PROT_NONE gdbstub test")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240131220245.235993-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Change cpu_mmu_index argument to CPUState

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Implement cpu_mmu_index generically

For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/xtensa: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/tricore: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sh4: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Split out s390x_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Populate CPUClass.mmu_index

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Replace cpu_mmu_index with riscv_env_mmu_index

Use the target-specific function name in preference
to the generic name.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Rename riscv_cpu_mmu_index to riscv_env_mmu_index

Free up the riscv_cpu_mmu_index name for other usage;
emphasize that the argument is 'env'.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Split out ppc_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/openrisc: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Split out mips_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Pass ptw_mmu_idx down from mips_cpu_tlb_fill

Rather than adjust env->hflags so that the value computed
by cpu_mmu_index() changes, compute the mmu_idx that we
want directly and pass it down.

Introduce symbolic constants for MMU_{KERNEL,ERL}_IDX.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/microblaze: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/m68k: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/loongarch: Rename MMU_IDX_*

The expected form is MMU_FOO_IDX, not MMU_IDX_FOO.
Rename to match generic code.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/loongarch: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Populate CPUClass.mmu_index

Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Cache mem_index in DisasContext

Compute this value once for each translation.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/avr: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Split out arm_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/alpha: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/alpha: Split out alpha_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/hw/core: Add mmu_index to CPUClass

To be used after all targets have populated the hook.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-nic-config-2-20240202' of git://git.infradead.org/users/dwmw2/qemu into staging

Rework matching of network devices to -nic options (v2)

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmW9F9oSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVEVwsQAIIDTYb3R/vxpf6w9n+n6FWCbFt/ihPC
# RbQ/Zrnoj6K3dCj6U3zJDpa5qpJ27/AiFfVv/gU13d+ELf72uHKE50GkQa2r/Fl8
# cPoW1LRinGFGxQS+WY5OnRYJ2mBaVx6THUd5DCgb5wpkBgVe21XsZLr6pfAapNCG
# c22HBaIb8sHPeIV2wf1xZKEswNGlkXuylBnS4wayncRKa2vOYPAAO7P4PvwNuMnb
# j0pLyLfD6Zx+6D53ema4zpcDh7d1Qn5eDGHQmy55Ml5AleC05gsDzrCEeiT4vU9T
# 9fj6w8NlyLkPYLqTodAEeaUpUCFhMO312VPSM163iYOUDtjqz10bBZncgbRrsR5I
# 30bKqQvEQ8PAQZWILNhfyHrYw4/O2Y88sUf/lE8lGmHvVYda+yqq5lgEyPFHbJwh
# ZCEJQalc6tRATIWUqI/Lw+X7hqnJ29c14hkEVG8L0KW0fIB/cqXUStzcUt87VkA2
# wwQI4aAGWZE1pvFvhmeM2rTDXfg1uD8SoFDTj4ORJl/7PEemf1yraKUYb8YdRE0z
# dQWfLmSnl1JkTa0yVF5MtnoTJUP8PX+hhJROfdwvfd1sU5s98O5pivYf7arUybVl
# j4g4qwm8IUBiAznZzbhdp38Q91RFvBKjjLsx/+Ts9avZTL0xCUcCvt21wzqWhbkc
# X7KdrU/XxVry
# =4PuR
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Feb 2024 16:27:06 GMT
# gpg:                using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg:                issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg:                 aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5  F286 9BE9 80FD 0AC0 1544

* tag 'pull-nic-config-2-20240202' of git://git.infradead.org/users/dwmw2/qemu: (47 commits)
  net: make nb_nics and nd_table[] static in net/net.c
  net: remove qemu_show_nic_models(), qemu_find_nic_model()
  hw/pci: remove pci_nic_init_nofail()
  net: remove qemu_check_nic_model()
  hw/xtensa/xtfpga: use qemu_create_nic_device()
  hw/sparc/sun4m: use qemu_find_nic_info()
  hw/s390x/s390-virtio-ccw: use qemu_create_nic_device()
  hw/riscv: use qemu_configure_nic_device()
  hw/openrisc/openrisc_sim: use qemu_create_nic_device()
  hw/net/lasi_i82596: use qemu_create_nic_device()
  hw/net/lasi_i82596: Re-enable build
  hw/mips/jazz: use qemu_find_nic_info()
  hw/mips/mipssim: use qemu_create_nic_device()
  hw/microblaze: use qemu_configure_nic_device()
  hw/m68k/q800: use qemu_find_nic_info()
  hw/m68k/mcf5208: use qemu_create_nic_device()
  hw/net/etraxfs-eth: use qemu_configure_nic_device()
  hw/arm: use qemu_configure_nic_device()
  hw/arm/stellaris: use qemu_find_nic_info()
  hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliases
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

net: make nb_nics and nd_table[] static in net/net.c

Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb06104 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: remove qemu_show_nic_models(), qemu_find_nic_model()

These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/pci: remove pci_nic_init_nofail()

This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: remove qemu_check_nic_model()

There are no callers of this function any more, as they have all been
converted to qemu_{create,configure}_nic_device().

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xtensa/xtfpga: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sparc/sun4m: use qemu_find_nic_info()

Obtain the MAC address from the NIC configuration if there is one, or
generate one explicitly so that it can be placed in the PROM.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/s390x/s390-virtio-ccw: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Huth <thuth@redhat.com>

hw/riscv: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/openrisc/openrisc_sim: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lasi_i82596: use qemu_create_nic_device()

Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005d7) tries to do the same thing.

The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lasi_i82596: Re-enable build

When converting to the shiny build-system-du-jour, a typo prevented the
last_i82596 driver from being built. Correct the config option name to
re-enable the build. And include "sysemu/sysemu.h" so it actually builds.

Fixes: b1419fa66558 ("meson: convert hw/net")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2144
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/jazz: use qemu_find_nic_info()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/mipssim: use qemu_create_nic_device()

The MIPS SIM platform instantiates its NIC only if a corresponding
configuration exists for it. Use qemu_create_nic_device() function for
that.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/microblaze: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/m68k/q800: use qemu_find_nic_info()

If a corresponding NIC configuration was found, it will have a MAC address
already assigned, so use that. Else, generate and assign a default one.

Using qemu_find_nic_info() is simpler than the alternative of using
qemu_configure_nic_device() and then having to fetch the "mac" property
as a string and convert it.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/m68k/mcf5208: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/etraxfs-eth: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/stellaris: use qemu_find_nic_info()

Rather than just using qemu_configure_nic_device(), populate the MAC
address in the system-registers device by peeking at the NICInfo before
it's assigned to the device.

Generate the MAC address early, if there is no matching -nic option.
Otherwise the MAC address wouldn't be generated until net_client_init1()
runs.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliases

Also update the test to specify which device to attach the test socket
to, and remove the comment lamenting the fact that we can't do so.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/highbank: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lan9118: use qemu_configure_nic_device()

Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/smc91c111: use qemu_configure_nic_device()

Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/fsl: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/exynos4: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/aspeed: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>

hw/arm/allwinner: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xtensa/virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sparc64/sun4u: use pci_init_nic_devices()

The first sunhme NIC gets placed a function 1 on slot 1 of PCI bus A,
and the rest are dynamically assigned on PCI bus B.

Previously, any PCI NIC would get the special treatment purely by
virtue of being first in the list.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sh4/r2d: use pci_init_nic_devices()

Previously, the first PCI NIC would be assigned to slot 2 even if the
user override the model and made it something other than an rtl8139
which is the default. Everything else would be dynamically assigned.

Now, the first rtl8139 gets slot 2 and everything else is dynamic.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>

hw/ppc: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/ppc/spapr: use qemu_get_nic_info() and pci_init_nic_devices()

Avoid directly referencing nd_table[] by first instantiating any
spapr-vlan devices using a qemu_get_nic_info() loop, then calling
pci_init_nic_devices() to do the rest.

No functional change intended.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/ppc/prep: use pci_init_nic_devices()

Previously, the first PCI NIC would be placed in PCI slot 3 and the rest
would be dynamically assigned. Even if the user overrode the default NIC
type and made it something other than PCNet.

Now, the first PCNet NIC (that is, anything not explicitly specified
to be anything different) will go to slot 3 even if it isn't the first
NIC specified on the command line. And anything else will be dynamically
assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/loongson3_virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/malta: use pci_init_nic_devices()

The Malta board setup code would previously place the first NIC into PCI
slot 11 if was a PCNet card, and the rest (including the first if it was
anything other than a PCNet card) would be dynamically assigned.

Now it will place any PCNet NIC into slot 11, and then anything else will
be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/fuloong2e: use pci_init_nic_devices()

The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7, which is where the Fuloong board had an RTL8139. All other
devices (including the first, if it was specified as anything other than
an rtl8319) get dynamically assigned on the bus.

The new behaviour is subtly different: If the first NIC was given a
specific model *other* than rtl8139, and a subsequent NIC was not,
then the rtl8139 (or unspecified) NIC will go to slot 7 and the rest
will be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/loongarch: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Song Gao <gaosong@loongson.cn>

hw/hppa: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/sbsa-ref: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>

hw/alpha/dp264: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xen: use qemu_create_nic_bus_devices() to instantiate Xen NICs

When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.

Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.

This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>