drm/nouveau: uapi: fix kerneldoc warnings

As of commit b77fdd6a48e6 ("scripts/kernel-doc: restore warning for
Excess struct/union"), we see the following warnings when running 'make
htmldocs':

  ./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_OP_MAP' description in 'drm_nouveau_vm_bind_op'
  ./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_OP_UNMAP' description in 'drm_nouveau_vm_bind_op'
  ./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_SPARSE' description in 'drm_nouveau_vm_bind_op'
  ./include/uapi/drm/nouveau_drm.h:336: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_RUN_ASYNC' description in 'drm_nouveau_vm_bind'

The problem is that these values are #define constants, but had kerneldoc
comments attached to them as if they were actual struct members.

There are a number of ways we could fix this, but I chose to draw
inspiration from include/uapi/drm/i915_drm.h, which pulls them into the
corresponding kerneldoc comment for the struct member that they are
intended to be used with.

To keep the diff readable, there are a number of things I _didn't_ do in
this patch, but which we should also consider:

- This is pretty good documentation, but it ends up in gpu/driver-uapi,
  which is part of subsystem-apis/ when it really ought to display under
  userspace-api/ (the "Linux kernel user-space API guide" book of the
  documentation).

- More generally, we might want a warning if include/uapi/ files are
  kerneldoc'd outside userspace-api/.

- I'd consider it cleaner if the #defines appeared between the kerneldoc
  for the member and the member itself (which is something other DRM-
  related UAPI docs do).

- The %IDENTIFIER kerneldoc syntax is intended for "constants", and is
  more appropriate in this context than ``IDENTIFIER`` or &IDENTIFIER.
  The DRM docs aren't very consistent on this.

Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231225065145.3060754-1-vegard.nossum@oracle.com

drm/nouveau/volt/gk20a: don't misuse kernel-doc comments

Change kernel-doc "/**" comments to common "/*" comments to prevent
kernel-doc warnings:

gk20a.c:49: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0)
gk20a.c:49: warning: missing initial short description on line:
 * cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0)
gk20a.c:62: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * cvb_t_mv =
gk20a.c:62: warning: missing initial short description on line:
 * cvb_t_mv =

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231233633.6596-4-rdunlap@infradead.org

drm/nouveau/gr/gf100: don't misuse kernel-doc comments

Change kernel-doc "/**" comments to common "/*" comments to prevent
kernel-doc warnings:

gf100.c:1044: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Wait until GR goes idle. GR is considered idle if it is disabled by the
gf100.c:1044: warning: missing initial short description on line:
 * Wait until GR goes idle. GR is considered idle if it is disabled by the

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231233633.6596-3-rdunlap@infradead.org

drm/nouveau: don't misuse kernel-doc comments

Change kernel-doc "/**" comments to common "/*" comments to prevent
kernel-doc warnings:

nouveau_ioc32.c:2: warning: Cannot understand  * \file mga_ioc32.c
 on line 2 - I thought it was a doc line
nouveau_ioc32.c:52: warning: Function parameter or member 'filp' not described in 'nouveau_compat_ioctl'
nouveau_ioc32.c:52: warning: Function parameter or member 'cmd' not described in 'nouveau_compat_ioctl'
nouveau_ioc32.c:52: warning: Function parameter or member 'arg' not described in 'nouveau_compat_ioctl'
nouveau_ioc32.c:52: warning: expecting prototype for Called whenever a 32-bit process running under a 64(). Prototype was for nouveau_compat_ioctl() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231233633.6596-2-rdunlap@infradead.org

drm/nouveau/disp: don't misuse kernel-doc comments

Change kernel-doc "/**" comments to common "/*" comments to prevent
kernel-doc warnings:

crtc.c:453: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Sets up registers for the given mode/adjusted_mode pair.
crtc.c:453: warning: missing initial short description on line:
 * Sets up registers for the given mode/adjusted_mode pair.
crtc.c:629: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Sets up registers for the given mode/adjusted_mode pair.
crtc.c:629: warning: missing initial short description on line:
 * Sets up registers for the given mode/adjusted_mode pair.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231233633.6596-1-rdunlap@infradead.org

drm/nouveau/bios/init: drop kernel-doc notation

The "/**" comments in this file are not kernel-doc comments. They are
used on static functions which can have kernel-doc comments, but that
is not the primary focus of kernel-doc comments.
Since these comments are incomplete for kernel-doc notation, remove
the kernel-doc "/**" markers and make them common comments.

This prevents scripts/kernel-doc from issuing 68 warnings:

init.c:584: warning: Function parameter or member 'init' not described in 'init_reserved'

and 67 warnings like this one:
init.c:611: warning: expecting prototype for INIT_DONE(). Prototype was for init_done() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231216201152.31376-1-rdunlap@infradead.org

drm/probe-helper: remove unused drm_connector_helper_get_modes_from_ddc()

Remove the unused drm_connector_helper_get_modes_from_ddc()
function. Most drivers should probably have this functionality split to
detect and get modes parts, so the helper is not the best abstraction.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/60eb6b2db16747d3f9c12604b197f33da585c16e.1704473654.git.jani.nikula@intel.com

drm/mgag200: convert get modes to struct drm_edid

Convert mgag200_vga_connector_helper_get_modes() to use struct drm_edid
based functions directly.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/19a453c725fc27bd890f8fc73104f43a376dfce0.1704473654.git.jani.nikula@intel.com

drm/mgag200: Fix caching setup for remapped video memory

I/O video memory for the framebuffer supports write-combine caching
mode. Simplify the driver's code that sets up the caching mode.

 * Map video memory with ioremap_wc(), which automatically sets up
the PAT entry with write-combine caching.

 * Remove the now obsolete call to devm_arch_io_reserve_memtype_wc().
It is only required to mmap the video memory to user space, which the
driver doesn't do.

 * According to the PAT documentation, arch_phys_wc_add() is best
called after remapping I/O memory, so move it after ioremap.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105082714.21881-1-tzimmermann@suse.de

drm/sched: Return an error code only as a constant in drm_sched_init()

Return an error code without storing it in an intermediate variable.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patchwork.freedesktop.org/patch/msgid/85f8004e-f0c9-42d9-8c59-30f1b4e0b89e@web.de
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>

drm/sched: One function call less in drm_sched_init() after error detection

The kfree() function was called in one case by the
drm_sched_init() function during error handling
even if the passed data structure member contained a null pointer.
This issue was detected by using the Coccinelle software.

Thus adjust a jump target.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patchwork.freedesktop.org/patch/msgid/85066512-983d-480c-a44d-32405ab1b80e@web.de
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>

drm: Move drm_set_preferred_mode() helper from drm_edid to drm_modes

The helper is generic, it doesn't use the opaque EDID type struct drm_edid
and is also used by drivers that only support non-probeable displays such
as fixed panels.

These drivers add a list of modes using drm_mode_probed_add() and then set
a preferred mode using the drm_set_preferred_mode() helper.

It seems more logical to have the helper definition in drm_modes.o instead
of drm_edid.o, since the former contains modes helper while the latter has
helpers to manage the EDID information.

Since both drm_edid.o and drm_modes.o object files are built-in the drm.o
object, there are no functional changes. But besides being a more logical
place for this helper, it could also allow to eventually make drm_edid.o
optional and not included in drm.o if only fixed panels must be supported
in a given system.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102122208.3103597-1-javierm@redhat.com

drm/edid: prefer forward declarations over includes in drm_edid.h

There's no need to include either linux/hdmi.h or drm/drm_mode.h. They
can be removed by using forward declarations.

While at it, group the forward declarations together, and remove the
unnecessary ones.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104211028.1129606-1-jani.nikula@intel.com

drm/panel: ltk050h3146w: use dev_err_probe wherever possible

This is only a cosmetic change.

This replaces a hand-crafted EPROBE_DEFER handling for deciding to print
an error message with dev_err_probe.

A side-effect is that dev_err_probe also adds a debug message when it's
not EPROBE_DEFER, but this is seen as an improvement.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-2-8ef3c0b585d8@theobroma-systems.com

drm/panel: ltk050h3146w: only print message when GPIO getting is not EPROBE_DEFER

devm_gpiod_get_optional may return EPROBE_DEFER in case the GPIO
controller isn't yet probed when the panel driver is being probed.

In that case, a spurious and confusing error message about not being
able to get the reset GPIO is printed even though later on the device
actually manages to get probed.

Use dev_err_probe instead so that the message is only printed when it
truly matters.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-1-8ef3c0b585d8@theobroma-systems.com

drm/rockchip: lvds: do not print scary message when probing defer

This scary message can misled the user into thinking something bad has
happened and needs to be fixed, however it could simply be part of a
normal boot process where EPROBE_DEFER is taken into account. Therefore,
let's use dev_err_probe so that this message doesn't get shown (by
default) when the return code is EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-2-9c59a5779cf9@theobroma-systems.com

drm/rockchip: lvds: do not overwrite error code

ret variable stores the return value of drm_of_find_panel_or_bridge
which can return error codes different from EPROBE_DEFER. Therefore,
let's just return that error code instead of forcing it to EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-1-9c59a5779cf9@theobroma-systems.com

drm/rockchip: inno_hdmi: Drop custom fill_modes hook

Now that we have proper pixelclock-based mode validation we can drop the
custom fill_modes hook.
CRTC size validation for the display controller has been added with
Commit 8e140cb60270 ("drm/rockchip: vop: limit maximum resolution to
hardware capabilities")

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-27-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Add basic mode validation

As per TRM this controller supports pixelclocks starting from 25 MHz. The
maximum supported pixelclocks are defined by the phy configurations we
have. Also it can't support modes that require doubled clocks. If the
variant has a phy reference clock we can additionally validate against VESA
DMT'srecommendations.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-26-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Add RK3128 support

This variant requires the phy reference clock to be enabled before the DDC
block can work and the (initial) DDC bus frequency is calculated based on
the rate of this clock. Besides the only difference is phy configuration
required to make the driver working for this variant as well.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-25-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Add variant support

In preparation to support RK3128's integration of the controller, this
patch adds a simple variant implementation. They mainly differ in the phy
configuration required, so those are part of the match_data. The values
have been taken from downstream. The pixelclocks in there are meant to be
max-inclusive.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-24-knaerzche@gmail.com

drm/rockchip: analogix_dp: get encoder port ID from DT

The VOP2 driver needs this port ID to properly configure the
display data routing.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103181301.3339595-1-l.stach@pengutronix.de

drm/vmwgfx: Unmap the surface before resetting it on a plane state

Switch to a new plane state requires unreferencing of all held surfaces.
In the work required for mob cursors the mapped surfaces started being
cached but the variable indicating whether the surface is currently
mapped was not being reset. This leads to crashes as the duplicated
state, incorrectly, indicates the that surface is mapped even when
no surface is present. That's because after unreferencing the surface
it's perfectly possible for the plane to be backed by a bo instead of a
surface.

Reset the surface mapped flag when unreferencing the plane state surface
to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland:

Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f>
RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600
RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920
R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00
FS:  00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0
Call Trace:
 <TASK>
 ? __die+0x23/0x70
 ? page_fault_oops+0x171/0x4e0
 ? exc_page_fault+0x7f/0x180
 ? asm_exc_page_fault+0x26/0x30
 ? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
 drm_atomic_helper_cleanup_planes+0x9b/0xc0
 commit_tail+0xd1/0x130
 drm_atomic_helper_commit+0x11a/0x140
 drm_atomic_commit+0x97/0xd0
 ? __pfx___drm_printfn_info+0x10/0x10
 drm_atomic_helper_update_plane+0xf5/0x160
 drm_mode_cursor_universal+0x10e/0x270
 drm_mode_cursor_common+0x102/0x230
 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10
 drm_ioctl_kernel+0xb2/0x110
 drm_ioctl+0x26d/0x4b0
 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10
 ? __pfx_drm_ioctl+0x10/0x10
 vmw_generic_ioctl+0xa4/0x110 [vmwgfx]
 __x64_sys_ioctl+0x94/0xd0
 do_syscall_64+0x61/0xe0
 ? __x64_sys_ioctl+0xaf/0xd0
 ? syscall_exit_to_user_mode+0x2b/0x40
 ? do_syscall_64+0x70/0xe0
 ? __x64_sys_ioctl+0xaf/0xd0
 ? syscall_exit_to_user_mode+0x2b/0x40
 ? do_syscall_64+0x70/0xe0
 ? exc_page_fault+0x7f/0x180
 entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f1e93f279ed
Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f>
RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed
RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015
RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007
R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0
R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790
 </TASK>
Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine>
CR2: 0000000000000028
---[ end trace 0000000000000000 ]---
RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f>
RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600
RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920
R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00
FS:  00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 485d98d472d5 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4")
Reported-by: Stefan Hoffmeister <stefan.hoffmeister@econos.de>
Closes: https://gitlab.freedesktop.org/drm/misc/-/issues/34
Cc: Martin Krastev <martin.krastev@broadcom.com>
Cc: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Cc: Ian Forbes <ian.forbes@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.19+
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231224052540.605040-1-zack.rusin@broadcom.com

drm/vmwgfx: fix kernel-doc Excess struct member 'base'

Fix a new kernel-doc warning reported by kernel test robot:

vmwgfx_surface.c:55: warning: Excess struct member 'base' description in 'vmw_user_surface'

The other warning is not correct: it is confused by "__counted_by".
Kees has made a separate patch for that.

In -Wall mode, kernel-doc still reports 20 warnings of this nature:
vmwgfx_surface.c:198: warning: No description found for return value of 'vmw_surface_dma_size'
but I am not addressing those.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150701.kNI9LuM3-lkp@intel.com/
Cc: Kees Cook <keescook@chromium.org>
Cc: Zack Rusin <zackr@vmware.com>
Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215235638.19189-1-rdunlap@infradead.org

drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node

When ida_alloc_max fails, resources allocated before should be freed,
including *res allocated by kmalloc and ttm_resource_init.

Fixes: d3bcb4b02fe9 ("drm/vmwgfx: switch the TTM backends to self alloc")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204091416.3308430-1-alexious@zju.edu.cn

drm/vmwgfx: fix all kernel-doc warnings in stdu

kernel test robot reports one kernel-doc warning in stdu, but
running scripts/kernel-doc in -Wall mode reports several more,
so fix all of them at one time:

vmwgfx_stdu.c:76: warning: Excess struct member 'transfer' description in 'vmw_stdu_dirty'
vmwgfx_stdu.c:103: warning: missing initial short description on line:
 * struct vmw_screen_target_display_unit
vmwgfx_stdu.c:215: warning: No description found for return value of 'vmw_stdu_bind_st'
vmwgfx_stdu.c:320: warning: No description found for return value of 'vmw_stdu_destroy_st'
vmwgfx_stdu.c:551: warning: No description found for return value of 'vmw_kms_stdu_readback'
vmwgfx_stdu.c:719: warning: No description found for return value of 'vmw_kms_stdu_surface_dirty'
vmwgfx_stdu.c:895: warning: No description found for return value of 'vmw_stdu_primary_plane_prepare_fb'
vmwgfx_stdu.c:1470: warning: No description found for return value of 'vmw_stdu_init'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150347.5icezNlK-lkp@intel.com/
Cc: Zack Rusin <zackr@vmware.com>
Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215234102.16574-1-rdunlap@infradead.org

drm/vmwgfx: Fix typos in vmwgfx_execbuf.c

Fix typos in vmwgfx_execbuf.c.

Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215053016.552019-1-ghanshyam1898@gmail.com

drm/virtio: Spelling fixes

While making a spelling mistake myself for `git grep kvalloc`
I found that the only file has such a typo. Fix it and update
to the standard de facto of how we refer to the functions.
Also spell usr-out as user-out, it seems this driver uses its
own terminology nobody else can decypher, make it more readable.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219151955.2477488-1-andriy.shevchenko@linux.intel.com

drm/debugfs: drop unneeded DEBUG_FS guard

The Makefile enables/disables the file compilation depending on
CONFIG_DEBUG_FS.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231223183301.78332-1-dario.binacchi@amarulasolutions.com

drm/vkms: Avoid reading beyond LUT array

When the floor LUT index (drm_fixp2int(lut_index) is the last
index of the array the ceil LUT index will point to an entry
beyond the array. Make sure we guard against it and use the
value of the floor LUT index.

v3:
 - Drop bits from commit description that didn't contribute
   anything of value

Fixes: db1f254f2cfa ("drm/vkms: Add support to 1D gamma LUT")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-6-harry.wentland@amd.com

drm/vkms: Create separate Kconfig file for VKMS

This aligns with most other DRM drivers and will allow
us to add new VKMS config options without polluting
the DRM Kconfig.

v3:
 - Change SPDX to GPL-2.0-only to match DRM KConfig
   SPDX (Simon)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-4-harry.wentland@amd.com

drm: Don't treat 0 as -1 in drm_fixp2int_ceil

Unit testing this in VKMS shows that passing 0 into
this function returns -1, which is highly counter-
intuitive. Fix it by checking whether the input is
>= 0 instead of > 0.

Fixes: 64566b5e767f ("drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-2-harry.wentland@amd.com

drm/vc4: plane: check drm_gem_plane_helper_prepare_fb() return value

Bubble up any error to the caller.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231216141518.242811-1-contact@emersion.fr

drm/ssd130x: Add support for the SSD133x OLED controller family

The Solomon SSD133x controllers (such as the SSD1331) are used by RGB dot
matrix OLED panels, add a modesetting pipeline to support the chip family.

The SSD133x controllers support 256 (8-bit) and 65k (16-bit) color depths
but only the 256-color mode (DRM_FORMAT_RGB332) is implemented for now.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-5-javierm@redhat.com

dt-bindings: display: Add SSD133x OLED controllers

Add a Device Tree binding schema for the OLED panels based on the
Solomon SSD133x family of controllers.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-4-javierm@redhat.com

dt-bindings: display: ssd132x: Add vendor prefix to width and height

Commit 2d23e7d6bacb ("dt-bindings: display: Add SSD132x OLED controllers")
used the wrong properties for width and height, instead of the correct
"solomon,width" and "solomon,height" properties.

Fix this by adding the vendor prefix to the width and height properties.

Fixes: 2d23e7d6bacb ("dt-bindings: display: Add SSD132x OLED controllers")
Reported-by: Conor Dooley <conor@kernel.org>
Closes: https://lore.kernel.org/dri-devel/20231218-example-envision-b41ca8efa251@spud/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-3-javierm@redhat.com

dt-bindings: display: ssd1307fb: Add vendor prefix to width and height

The commit 591825fba8a2 ("dt-bindings: display: ssd1307fb: Remove default
width and height values") used the wrong properties for width and height,
instead of the correct "solomon,width" and "solomon,height" properties.

Fix this by adding the vendor prefix to the width and height properties.

Fixes: 591825fba8a2 ("dt-bindings: display: ssd1307fb: Remove default width and height values")
Reported-by: Conor Dooley <conor@kernel.org>
Closes: https://lore.kernel.org/dri-devel/20231218-example-envision-b41ca8efa251@spud/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-2-javierm@redhat.com

drm/rockchip: inno_hdmi: Split power mode setting

This splits setting the power mode of the controller / phy in two
functions. It's done in preparation of setting up the phy based on the
pixelclock.

No functional changes intended.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-23-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Don't power up the phy after resetting

inno_hdmi_reset is only ever called when initializing the controller. At
this point it’s completely uneccessary to power up the PHY, since all
what has to work at this point is the DDC bus. The phy will be powered up
correctly when a mode is set in inno_hdmi_encoder_enable and disabled in
inno_hdmi_encoder_disable.
Set it to LOWER_PWR after resetting the controller.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-22-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Correctly setup HDMI quantization range

The display controller will always give full range RGB regardless of the
mode set, but HDMI requires certain modes to be transmitted in limited
range RGB. This is especially required for HDMI sinks which do not support
non-standard quantization ranges.

This enables color space conversion for those modes and sets the
quantization range accordingly in the AVI infoframe.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-21-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Subclass connector state

The data which is currently hold in hdmi_data should not be part of device
itself but of the connector state.
Introduce a connector state subclass and move the data from hdmi_data in
there.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-20-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove useless include

The inclusion syscon.h isn't used anywhere. Remove it.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-19-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Drop irq struct member

The struct member irq isn't used anywhere. Drop it.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-18-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove unused drm device pointer

The drm_dev field in the inno_hdmi struct stores a pointer to the DRM
device but is never used anywhere in the driver. Let's remove it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-17-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Switch to infoframe type

The inno_hdmi driver relies on its own internal infoframe type matching
the hardware.

This works fine, but in order to make further reworks easier, let's
switch to the HDMI spec definition of those types.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-16-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Move infoframe disable to separate function

The code to upload infoframes to the controller uses a weird construct
which, based on the previous function call return code, will either
disable or enable that infoframe.

In order to get rid of that argument, let's split the function to
disable the infoframe into a separate function and make it obvious what
we are doing in the error path.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-15-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Drop HDMI Vendor Infoframe support

The HDMI vendor infoframe is only meant to be sent with 4k60 modes and
higher, but the controller doesn't support them. Let's drop them from
the kernel.

Suggested-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-14-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove tmds rate from structure

The tmds_rate field in the inno_hdmi structure is used mostly to
configure the internal i2c controller divider through a call to the
inno_hdmi_i2c_init() function.

We can simply make that rate an argument to that function, which also
removes a workaround to initialize the divider at probe time when we
don't have a mode yet.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-13-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove YUV-based csc coefficents

Now that the unneeded support for YUV based input formats is gone, the csc
coefficients for those formats can be dropped as well.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-12-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove useless input format

The driver has a lot of logic to deal with multiple input formats, but
hardcodes it to RGB. This means that most of that code has been dead
code, so let's get rid of it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-11-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove unneeded has audio flag

The sink_has_audio flag is not used anywhere in the driver so let's get
rid of it. It's redundant with drm_display_info.has_audio anyway.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-10-knaerzche@gmail.com

drm/rockchip: inno_hdmi: no need to store vic

The mode's VIC is only ever used in the inno_hdmi_setup() function so
there's no need to store it in the main structure.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-9-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Get rid of mode_set

We're not doing anything special in atomic_mode_set so we can simply
merge it into atomic_enable.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-8-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Switch encoder hooks to atomic

The inno_hdmi encoder still uses the !atomic variants of enable, disable
and modeset. Convert to their atomic equivalents.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-7-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove useless copy of drm_display_mode

The driver maintains a copy of the adjusted mode but doesn't use it
anywhere. Remove it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-6-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Remove useless mode_fixup

The mode_fixup implementation doesn't do anything, so we can simply
remove it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-5-knaerzche@gmail.com

drm/rockchip: inno_hdmi: Fix video timing

The controller wants the difference between *total and *sync_start in the
HDMI_VIDEO_EXT_*DELAY registers. Otherwise the signal is very unstable for
certain non-VIC modes. See downstream commit [0].

[0] https://github.com/rockchip-linux/kernel/commit/8eb559f2502c

Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Co-developed-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-4-knaerzche@gmail.com

drm/rockchip: vop: Add output selection registers for RK312x

In contrast to RK3036, RK312x SoCs have multiple output channels such as
RGB (i.e. LVDS TTL), LVDS, DSI and HDMI.

In order to support that, this splits output from RK3036 and defines an
separate one for RK3126 with the registers required to enable the
appropriate output and setup the correct polarity.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-3-knaerzche@gmail.com

drm/tilcdc: request and mapp iomem with devres

tilcdc currently just ioremaps its iomem, without doing the (a bit more
robust) request on the memory first. The devm_ functions provide a handy
way to both request and ioremap the memory with automatic cleanup.

Replace the manual ioremap with the devm_ version.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222115216.19218-2-pstanner@redhat.com

dt-bindings: panel: lvds: Append edt,etml0700z9ndha in panel-lvds

List EDT ETML0700Z9NDHA in the LVDS panel enumeration.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231221124339.420119-2-raphael.gallais-pou@foss.st.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221124339.420119-2-raphael.gallais-pou@foss.st.com

accel/qaic: Order pci_remove() operations in reverse of probe()

In probe() we create the drm_device, and then register the MHI controller.
In remove(), we should unregister the controller first, then remove the
drm_device.  Update the remove() operations to match.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-8-quic_jhugo@quicinc.com

accel/qaic: Leverage DRM managed APIs to release resources

Offload the balancing of init and destroy calls to DRM managed APIs.
mutex destroy for ->cntl_mutex is not called during device release and
destroy workqueue is not called in error path of create_qdev(). So, use
DRM managed APIs to manage the release of resources and avoid such
problems.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-7-quic_jhugo@quicinc.com

drm/panel-edp: Add several generic edp panels

Add support for the following 3 panels:
1. BOE NV116WHM-N49 V8.0
2. BOE NV122WUM-N41
3. CSO MNC207QS1-1

Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218095933.2487360-1-xuxinxiong@huaqin.corp-partner.google.com

drm/panel-edp: Add some panels with conservative timings

These panels are used by Mediatek MT8173 Chromebooks, and they used to
work with the downstream v4.19 kernel without any specified delay.
Back in the v4.19 kernel, they used the "little white lie" approach,
which is making the devicetree claim a specific panel's compatible
string for many different panels. That was a common solution before the
generic edp-panel driver.

After we uprevved the device to a newer kernel and used the edp-panel
driver, we saw multiple devices reporting warnings of using an unknown
panel and falling back to the conservative timings, which means that
they turn on/off much more slowly than they should. We tried to fill in
the timings for those panels, but we failed to find all the data sheets
for them.

Therefore, instead of having them use the default conservative timings,
update them with less-conservative timings from other panels of the same
vendor. The panels should still work under those timings, and we can
save some delays and suppress the warnings.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-4-treapking@chromium.org

drm/edp-panel: Add panels delay entries

Add panels used by Mediatek MT8173 Chromebooks.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-3-treapking@chromium.org

drm/panel-edp: Add powered_on_to_enable delay

Add the support of powered_on_to_enable delay as the minimum time that
needs to have passed between the panel powered on and enable may begin.

This delay is seen in BOE panels as the minimum delay of T3+T4+T5+T6+T8
in the eDP timing diagrams.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-2-treapking@chromium.org

drm/mm: Allow CONFIG_DRM_MM_DEBUG with DRM=m

The original rationale for
commit cd456f8d06d2 ("drm: Restrict stackdepot usage to builtin drm.ko")
was that depot_save_stack() (which is what we used back then)
wasn't exported. stack_depot_save() (which is what we use now) is
exported however, so relax the dependency allow CONFIG_DRM_MM_DEBUG
with DRM=m.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215111129.9559-1-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>

drm/todo: Add entry to rename drm_atomic_state

The name of the structure drm_atomic_state is confusing. Let's add an
entry to our todo list to rename it.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-5-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/atomic: Make the drm_atomic_state documentation less ambiguous

The current documentation of drm_atomic_state says that it's the "global
state object". This is confusing since, while it does contain all the
objects affected by an update and their respective states, if an object
isn't affected by this update it won't be part of it.

Thus, it's not truly a "global state", unlike object state structures
that do contain the entire state of a given object.

Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://lore.kernel.org/r/20231214100917.277842-4-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/atomic: Rework the object doc a bit

Commits 63e83c1dba54 ("drm: Consolidate connector arrays in
drm_atomic_state"), b8b5342b699b ("drm: Consolidate plane arrays in
drm_atomic_state") and 5d943aa6c0d4 ("drm: Consolidate crtc arrays in
drm_atomic_state") moved the object pointer and their state pointer to
an intermediate structure storing both.

The CRTC commit didn't update the doc of the crtcs field to reflect
that, and the doc for the planes and connectors fields mention that they
are pointers to an array of structures with per-$OBJECT data.

The private_objs field was added later on by commit b430c27a7de3 ("drm:
Add driver-private objects to atomic state") reusing the same sentence
than the crtcs field, probably due to copy and paste.

While these fields are indeed pointers to an array, each item of that
array contain a pointer to the object structure affected by the update,
and its old and new state. There's no per-object data there, and there's
more than just a pointer to the objects.

Let's rephrase those fields a bit to better match the current situation.

Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-3-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/atomic: Remove inexistent reference

Commit 63e83c1dba54 ("drm: Consolidate connector arrays in
drm_atomic_state") removed the connector_states field but didn't remove
its mention in the num_connectors documentation.

Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-2-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/atomic: Move the drm_atomic_state field doc inline

Some fields of drm_atomic_state have been documented in-line, but some
were documented in the main kerneldoc block before the structure.

Since the former is the preferred option in DRM, let's move all the
fields to an inline documentation.

Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20231214100917.277842-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

fbdev/vesafb: Use screen_info pointer from device

Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that vesafb can modify it at
will.

v2:
* comment on devm_kmemdup() usage (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-5-tzimmermann@suse.de

fbdev/vesafb: Replace references to global screen_info by local pointer

Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-4-tzimmermann@suse.de

fbdev/efifb: Use screen_info pointer from device

Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that efifb can modify it at
will.

v2:
* comment on devm_kmemdup() usage (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-3-tzimmermann@suse.de

fbdev/efifb: Replace references to global screen_info by local pointer

Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.

v3:
* use const screen_info in several places (Sui)
* fix build for deferred takeover (kernel test robot)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-2-tzimmermann@suse.de

accel/qaic: Call drm_gem_create_mmap_offset() once for each BO

Every time QAIC_MMAP_BO ioctl is called for a BO,
drm_gem_create_mmap_offset() is called. Calling
drm_gem_create_mmap_offset() more then once for a BO seems redundant.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-6-quic_jhugo@quicinc.com

accel/qaic: Drop the reference to BO in error path of create BO IOCTL

Do not free BO explicitly in error path, just drop its reference, cleanup
will be taken care by DRM as we have registered for ->free() callback.
This patch makes sure that there is only one code path for BO to be freed.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-5-quic_jhugo@quicinc.com

accel/qaic: Fix MHI channel struct field order

The timesync channels have their struct fields out of order with the rest
of the channels. Fix them so there is a consistent style in the file.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-4-quic_jhugo@quicinc.com

accel/qaic: Remove bo->queued field

->queued field is used to track whether the BO is submitted to hardware for
DMA or not. Since same information can be retrieved using ->xfer_list field
of same structure remove ->queued as it is redundant.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-3-quic_jhugo@quicinc.com

accel/qaic: Deprecate ->size field from attach slice IOCTL structure

->size in struct qaic_attach_slice_hdr is redundant since we have BO handle
and its size can be retrieved from base BO structure.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-2-quic_jhugo@quicinc.com

drm/virtio: add definition for venus capset

This Venus capset definition is used by Qemu, and Qemu imports the
kernel protocol header file. Add Venus capset to the VirtIO-GPU protocol.

Signed-off-by: Huang Rui <ray.huang@amd.com>
[dmitry.osipenko@collabora.com: edit commit message]
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230915105918.3763061-1-ray.huang@amd.com

drm/bridge: samsung-dsim: check the return value only if necessary

It was useless to check again the "ret" variable if the function
register_host() was not called.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207161056.183442-1-dario.binacchi@amarulasolutions.com

drm/bridge: tc358767: Add descriptions to register definitions

Use the register names from the datasheet. No functional change intended.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212075257.75084-8-alexander.stein@ew.tq-group.com

drm/bridge: tc358767: Add precious register SYSSTAT

This is the single register which clears its value upon read operation.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212075257.75084-7-alexander.stein@ew.tq-group.com

drm/bridge: tc358767: Add more volatile registers

These registers might change their value without any host write operation.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212075257.75084-6-alexander.stein@ew.tq-group.com

drm/bridge: tc358767: Sort volatile registers according to address

Sort the list by the starting address to ease adding new entries.
No functional change intended.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212075257.75084-5-alexander.stein@ew.tq-group.com

drm/bridge: tc358767: Add more registers to non-writeable range

While at it, also add missing register definitions. HDCP registers are
skipped as they are not named, range 0x0980 - 0x09ac.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212075257.75084-4-alexander.stein@ew.tq-group.com

drm/bridge: tc358767: Fix order of register defines

0x0510 is bigger than 0x50c, order them accordingly.
No functional change intended.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212075257.75084-3-alexander.stein@ew.tq-group.com

drm/bridge: tc358767: Use regmap_access_table for writeable registers

Using ranges it is easier to add more register where writing is not allowed,
especially for sequences of registers.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212075257.75084-2-alexander.stein@ew.tq-group.com

drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths of tegra_output_probe()

If an error occurs after a successful of_get_i2c_adapter_by_node() call, it
should be undone by a corresponding i2c_put_adapter().

Add the missing i2c_put_adapter() call.

Fixes: 9be7d864cf07 ("drm/tegra: Implement panel support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b38604178991e1f08b2cda219103be266be2d680.1693667005.git.christophe.jaillet@wanadoo.fr

drm/tegra: rgb: Fix missing clk_put() in the error handling paths of tegra_dc_rgb_probe()

If clk_get_sys(..., "pll_d2_out0") fails, the clk_get_sys() call must be
undone.

Add the missing clk_put and a new 'put_pll_d_out0' label in the error
handling path, and use it.

Fixes: 0c921b6d4ba0 ("drm/tegra: dc: rgb: Allow changing PLLD rate on Tegra30+")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0182895ead4e4730426616b0d9995954c960b634.1693667005.git.christophe.jaillet@wanadoo.fr

drm/tegra: rgb: Fix some error handling paths in tegra_dc_rgb_probe()

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: 59d29c0ec93f ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0001f61eb89048bc36241629b564195689cf54b6.1693667005.git.christophe.jaillet@wanadoo.fr

drm/tegra: hdmi: Fix some error handling paths in tegra_hdmi_probe()

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: 59d29c0ec93f ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9b7c564eb71977678b20abd73ee52001a51cf327.1693667005.git.christophe.jaillet@wanadoo.fr

drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe()

If an error occurs after calling pm_runtime_enable(), pm_runtime_disable()
should be called as already done in the remove function.

Fixes: ef8187d75265 ("drm/tegra: dsi: Implement runtime PM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee4a15c9cd4b574a55cd67c30d2411239ba2cee9.1693667005.git.christophe.jaillet@wanadoo.fr

drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: dec727399a4b ("drm/tegra: Add DSI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16820073278d031f6c474a08d5f22a255158585e.1693667005.git.christophe.jaillet@wanadoo.fr

drm/tegra: dpaux: Fix PM disable depth imbalance in tegra_dpaux_probe

The pm_runtime_enable function increases the power disable depth,
which means that we must perform a matching decrement on the error
handling path to maintain balance within the given context.
Additionally, we need to address the same issue for pm_runtime_get_sync.
We fix this by invoking pm_runtime_disable and pm_runtime_put_sync
when error returns.

Fixes: 82b81b3ec1a7 ("drm/tegra: dpaux: Implement runtime PM")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_B13DB7F6C0023C46157250A524966F326A09@qq.com

drm/tegra: include drm/drm_edid.h only where needed

Reduce the need for rebuilds when drm_edid.h is modified by including it
only where needed.

v2: Fix build (kernel test robot <lkp@intel.com>)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213101951.3932273-1-jani.nikula@intel.com

drm/tegra: dsi: Add missing check for of_find_device_by_node

Add check for the return value of of_find_device_by_node() and return
the error if it fails in order to avoid NULL pointer dereference.

Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024080738.825553-1-nichen@iscas.ac.cn

MAINTAINERS: Remove Donald Robson from powervr driver maintainers

I will be leaving Imagination Technologies on 2023-12-15 and will no
longer be working on this driver.

Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214103353.122257-1-donald.robson@imgtec.com