drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms

Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used.
Two attachments use the same VM, root PD would be locked twice.

[   57.910418] Call Trace:
[   57.793726]  ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu]
[   57.793820]  amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu]
[   57.793923]  ? idr_get_next_ul+0xbe/0x100
[   57.793933]  kfd_process_device_free_bos+0x7e/0xf0 [amdgpu]
[   57.794041]  kfd_process_wq_release+0x2ae/0x3c0 [amdgpu]
[   57.794141]  ? process_scheduled_works+0x29c/0x580
[   57.794147]  process_scheduled_works+0x303/0x580
[   57.794157]  ? __pfx_worker_thread+0x10/0x10
[   57.794160]  worker_thread+0x1a2/0x370
[   57.794165]  ? __pfx_worker_thread+0x10/0x10
[   57.794167]  kthread+0x11b/0x150
[   57.794172]  ? __pfx_kthread+0x10/0x10
[   57.794177]  ret_from_fork+0x3d/0x60
[   57.794181]  ? __pfx_kthread+0x10/0x10
[   57.794184]  ret_from_fork_asm+0x1b/0x30

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/buddy: Fix the warn on's during force merge

Move the fallback and block incompatible checks
above, so that we dont unnecessarily split the blocks
and leaving the unmerged. This resolves the unnecessary
warn on's thrown during force_merge call.

v2:(Matthew)
  - Move the fallback and block incompatible checks above
    the contains check.

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 96950929eb23 ("drm/buddy: Implement tracking clear page feature")
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240517135015.17565-1-Arunpravin.PaneerSelvam@amd.com/
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143305.17894-1-Arunpravin.PaneerSelvam@amd.com

drm/tests: Add a unit test for range bias allocation

Allocate cleared blocks in the bias range when the DRM
buddy's clear avail is zero. This will validate the bias
range allocation in scenarios like system boot when no
cleared blocks are available and exercise the fallback
path too. The resulting blocks should always be dirty.

v1:(Matthew)
  - move the size to the variable declaration section.
  - move the mm.clear_avail init to allocator init.

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-2-Arunpravin.PaneerSelvam@amd.com

drm/buddy: Fix the range bias clear memory allocation issue

Problem statement: During the system boot time, an application request
for the bulk volume of cleared range bias memory when the clear_avail
is zero, we dont fallback into normal allocation method as we had an
unnecessary clear_avail check which prevents the fallback method leads
to fb allocation failure following system goes into unresponsive state.

Solution: Remove the unnecessary clear_avail check in the range bias
allocation function.

v2: add a kunit for this corner case (Daniel Vetter)

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Fixes: 96950929eb23 ("drm/buddy: Implement tracking clear page feature")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-1-Arunpravin.PaneerSelvam@amd.com

Merge tag 'drm-xe-next-fixes-2024-05-09-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

Driver Changes:
- Use ordered WQ for G2H handler. (Matthew Brost)
- Use flexible-array rather than zero-sized (Lucas De Marchi)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zjz7SzCvfA3vQRxu@fedora

Merge tag 'drm-misc-next-fixes-2024-05-08' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next-fixes for v6.10-rc1:
- panthor fixes.
- Reverting Kconfig changes, and moving drm options to submenu.
- Hide physical fb address in fb helper.
- zynqmp bridge fix.
- Revert broken ti-sn65dsi83 fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe630414-d13e-4052-86f3-ce3155eb3e44@linux.intel.com

Merge tag 'drm-msm-next-2024-05-07' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.10

Core:
- Switched to generating register header files during build process
  instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.

DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings (no driver changes, using SM8350
  as a fallback compat)

GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com

drm/xe/ads: Use flexible-array

Zero-length arrays are deprecated and flexible arrays should be
used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arrays

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202405051824.AmjAI5Pg-lkp@intel.com/
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506141917.205714-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit ee7284230644e21fef0e38fc5bf8f907b6bb7f7c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

drm/xe: Use ordered WQ for G2H handler

System work queues are shared, use a dedicated work queue for G2H
processing to avoid G2H processing getting block behind system tasks.

Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506034758.3697397-1-matthew.brost@intel.com
(cherry picked from commit 50aec9665e0babd62b9eee4e613d9a1ef8d2b7de)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

drm/msm/gen_header: allow skipping the validation

We don't need to run the validation of the XML files if we are just
compiling the kernel. Skip the validation unless the user enables
corresponding Kconfig option. This removes a warning from gen_header.py
about lxml being not installed.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240409120108.2303d0bd@canb.auug.org.au/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/592558/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Cleanup indexed regs const'ness

These tables were made non-const in commit 3cba4a2cdff3 ("drm/msm/a6xx:
Update ROQ size in coredump") in order to avoid powering up the GPU when
reading back a devcoredump.  Instead let's just stash the count that is
potentially read from hw in struct a6xx_gpu_state_obj, and make the
tables const again.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/592699/

drm/msm: Add devcoredump support for a750

Add an a750 case to the various places where we choose a list of
registers.
Patchwork: https://patchwork.freedesktop.org/patch/592519/

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592519
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Adjust a7xx GBIF debugbus dumping

Use the kgsl-style list of indices, because this is about to change for
a750 and we want to reuse the downstream header directly.
Patchwork: https://patchwork.freedesktop.org/patch/592520/

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592520
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Update a6xx registers XML

Update to Mesa commit e82d70d472cc ("freedreno/a7xx: Add
A7XX_HLSQ_DP_STR location from kgsl").

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592518/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Fix imported a750 snapshot header for upstream

Add A7XX prefixes necessary because we use the same code for dumping
a6xx and a7xx, fix register name prefixes for upstream, and use the
upstream header.
Patchwork: https://patchwork.freedesktop.org/patch/592517/

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592517
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Import a750 snapshot registers from kgsl

Import from kgsl commit 809ee24fe560.

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592516/
Signed-off-by: Rob Clark <robdclark@chromium.org>

MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver

Add myself as a reviewer for Adreno driver changes.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590705/
Signed-off-by: Rob Clark <robdclark@chromium.org>

MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers

The msm driver is.. gigantic and covers display hardware (incl. things
concerning (e)DP, DSI, HDMI), as well as the entire lineup of Adreno
GPUs (with hw bringup, memory mappings, userspace interaction etc.).

Because of that, people listed as M:/R: receive patches concerning
drivers for any part of the display block OR the GPU. Separate the
latter, as it's both a functionally separate block and is of
interest to different folks.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590704/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails

Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer
dereference on:

msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);

as gpu->pdev is only assigned in:

a6xx_gpu_init()
|_ adreno_gpu_init
    |_ msm_gpu_init()

Instead of relying on handwavy null checks down the cleanup chain,
explicitly de-allocate the LLC data and free a6xx_gpu instead.

Fixes: 76efc2453d0e ("drm/msm/gpu: Fix crash during system suspend after unbind")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/588919/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: fix CP cycles stat retrieval on a7xx

a7xx_submit() should use the a7xx variant of the RBBM_PERFCTR_CP register
for retrieving the CP cycles value before and after the submitted command
stream execution.

Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support")
Patchwork: https://patchwork.freedesktop.org/patch/588445/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a7xx: allow writing to CP_BV counter selection registers

In addition to the CP_PERFCTR_CP_SEL register range, allow writes to the
CP_BV_PERFCTR_CP_SEL registers in the 0x8e0-0x8e6 range for profiling
purposes of tools like fdperf and perfetto.

Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/580548/
[fixup a730_protect size]
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge tag 'drm-xe-next-fixes-2024-05-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

Driver Changes:
- Fix for a backmerge going slightly wrong.
- An UAF fix
- Avoid a WA error on LNL.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZjOijQA43zhu3SZ4@fedora

drm: zynqmp_dpsub: Always register bridge

We must always register the DRM bridge, since zynqmp_dp_hpd_work_func
calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be
initialized. We do this before zynqmp_dpsub_drm_init since that calls
drm_bridge_attach. This fixes the following lockdep warning:

[   19.217084] ------------[ cut here ]------------
[   19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[   19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550
[   19.241696] Modules linked in:
[   19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96
[   19.252046] Hardware name: xlnx,zynqmp (DT)
[   19.256421] Workqueue: events zynqmp_dp_hpd_work_func
[   19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   19.269104] pc : __mutex_lock+0x4bc/0x550
[   19.273364] lr : __mutex_lock+0x4bc/0x550
[   19.277592] sp : ffffffc085c5bbe0
[   19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8
[   19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000
[   19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000
[   19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000
[   19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720
[   19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001
[   19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888
[   19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000
[   19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000
[   19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880
[   19.356581] Call trace:
[   19.359160]  __mutex_lock+0x4bc/0x550
[   19.363032]  mutex_lock_nested+0x24/0x30
[   19.367187]  drm_bridge_hpd_notify+0x2c/0x6c
[   19.371698]  zynqmp_dp_hpd_work_func+0x44/0x54
[   19.376364]  process_one_work+0x3ac/0x988
[   19.380660]  worker_thread+0x398/0x694
[   19.384736]  kthread+0x1bc/0x1c0
[   19.388241]  ret_from_fork+0x10/0x20
[   19.392031] irq event stamp: 183
[   19.395450] hardirqs last  enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4
[   19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04
[   19.413612] softirqs last  enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c
[   19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c
[   19.432614] ---[ end trace 0000000000000000 ]---

Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308204741.3631919-1-sean.anderson@linux.dev
(cherry picked from commit 61ba791c4a7a09a370c45b70a81b8c7d4cf6b2ae)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"

This reverts commit 8a91b29f1f50ce7742cdbe5cf11d17f128511f3f.

The regulator_disable() added by the original commit solves one kind of
regulator imbalance but adds another one as it allows the regulator to be
disabled one more time than it is enabled in the following scenario:

 1. Start video pipeline -> sn65dsi83_atomic_pre_enable -> regulator_enable
 2. PLL lock fails -> regulator_disable
 3. Stop video pipeline -> sn65dsi83_atomic_disable -> regulator_disable

The reason is clear from the code flow, which looks like this (after
removing unrelated code):

  static void sn65dsi83_atomic_pre_enable()
  {
      regulator_enable(ctx->vcc);

      if (PLL failed locking) {
          regulator_disable(ctx->vcc);  <---- added by patch being reverted
          return;
      }
  }

  static void sn65dsi83_atomic_disable()
  {
      regulator_disable(ctx->vcc);
  }

The use case for introducing the additional regulator_disable() was
removing the module for debugging (see link below for the discussion). If
the module is removed after a .atomic_pre_enable, i.e. with an active
pipeline from the DRM point of view, .atomic_disable is not called and thus
the regulator would not be disabled.

According to the discussion however there is no actual use case for
removing the module with an active pipeline, except for
debugging/development.

On the other hand, the occurrence of a PLL lock failure is possible due to
any physical reason (e.g. a temporary hardware failure for electrical
reasons) so handling it gracefully should be supported. As there is no way
for .atomic[_pre]_enable to report an error to the core, the only clean way
to support it is calling regulator_disabled() only in .atomic_disable,
unconditionally, as it was before.

Link: https://lore.kernel.org/all/15244220.uLZWGnKmhe@steina-w/
Fixes: 8a91b29f1f50 ("drm/bridge: ti-sn65dsi83: Fix enable error path")
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426122259.46808-1-luca.ceresoli@bootlin.com
(cherry picked from commit 2940ee03b23281071620dda1d790cd644dabd394)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()

plane->state and plane->state->fb can be NULL, so add a check before
dereferencing them.
Found by testing with the imx driver.

Fixes: 879b3b6511fe ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426121121.241366-1-jfalempe@redhat.com
(cherry picked from commit 986c12d8c9a677c094c37bd6aa636b4d4c5ccd46)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/fbdev-generic: Do not set physical framebuffer address

Framebuffer memory is allocated via vzalloc() from non-contiguous
physical pages. The physical framebuffer start address is therefore
meaningless. Do not set it.

The value is not used within the kernel and only exported to userspace
on dedicated ARM configs. No functional change is expected.

v2:
- refer to vzalloc() in commit message (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a5b44c4adb16 ("drm/fbdev-generic: Always use shadow buffering")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de
(cherry picked from commit 73ef0aecba78aa9ebd309b10b6cd17d94e632892)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/panthor: Fix the FW reset logic

In the post_reset function, if the fast reset didn't succeed, we
are not clearing the fast_reset flag, which prevents firmware
sections from being reloaded. While at it, use panthor_fw_stop()
instead of manually writing DISABLE to the MCU_CONTROL register.

Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430113727.493155-1-boris.brezillon@collabora.com

drm/panthor: Make sure we handle 'unknown group state' case properly

When we check for state values returned by the FW, we only cover part of
the 0:7 range. Make sure we catch FW inconsistencies by adding a default
to the switch statement, and flagging the group state as unknown in that
case.

When an unknown state is detected, we trigger a reset, and consider the
group as unusable after that point, to prevent the potential corruption
from creeping in other places if we continue executing stuff on this
context.

v2:
- Add Steve's R-b
- Fix commit message

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/3b7fd2f2-679e-440c-81cd-42fc2573b515@moroto.mountain/T/#u
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502155248.1430582-1-boris.brezillon@collabora.com

drm: move DRM-related CONFIG options into DRM submenu

When you create a submenu using the 'menu' syntax, there is no
ambiguity about its end because the code between 'menu' and 'endmenu'
becomes the submenu.

In contrast, 'menuconfig' does not have the corresponding end marker.
Instead, the end of the submenu is inferred from symbol dependencies.

This is detailed in Documentation/kbuild/kconfig-language.rst, starting
line 348. It outlines two methods to place the code under the submenu:

 (1) Open an if-block immediately after 'menuconfig', enclosing the
     submenu content within it

 (2) Add 'depends on' to every symbol intended for the submenu

Many subsystems opt for (1) because it reliably maintains the submenu
structure.

The DRM subsystem adopts (2). The submenu ends when the sequence of
'depends on DRM' breaks. It can be confirmed by running a GUI frontend
such as 'make menuconfig' and visiting the DRM menu:

    < > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)  ----

If you toggle this, you will notice most of the DRM-related options
appear below it, not in the submenu.

I highly recommend the approach (1). Obviously, (2) is not reliable,
as the submenu breaks whenever someone forgets to add 'depends on DRM'.

This commit encloses the entire DRM configuration with 'if DRM' and
'endif', except for DRM_PANEL_ORIENTATION_QUIRKS.

Note:
 Now, 'depends on DRM' properties inside the if-block are all redundant.
 I leave it as follow-up cleanups.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426135602.2500125-1-masahiroy@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm/display: Make all helpers visible and switch to depends on"

This reverts commit d674858ff979550a0e97b4ac766f2640f0d9d7e7, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/3db958e3f4002e26cd963596d810c37feb315fb3.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: Make drivers depends on DRM_DW_HDMI"

This reverts commit c0e0f139354c01e0213204e4a96e7076e5a3e396, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd93d43b07f8ed6368119f4a5ddac2ee80debe53.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"

This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: Switch DRM_DISPLAY_DP_AUX_BUS to depends on"

This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: Switch DRM_DISPLAY_DP_HELPER to depends on"

This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: Switch DRM_DISPLAY_HDCP_HELPER to depends on"

This reverts commit 3166e7e6d935caaef07605a5c90773fbf9ffeaf4, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a40e70a0abd3d841c23c107d452a43fdd70ef37a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on"

This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd288a5943dab8609f2d1f2bf413595a61df727a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: fix DRM_DISPLAY_DP_HELPER dependencies"

This reverts commit d1ef8fc18be6adbbffdee06fbb5b33699e2852be, as the
commit it fixes will be reverted, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/df2876c72e82cbecfe8406fa058e8d3e895e4b93.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm/bridge: dw-hdmi: Make DRM_DW_HDMI selectable"

This reverts commit 0209df3b4731516fe77638bfc52ba2e9629c67cd, as the
commit it fixes (which is BTW not the commit in the Fixes: tag!) will be
reverted, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/b2d1a7a765e4af249f4c450383de6e8422647e2e.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm/display: Select DRM_KMS_HELPER for DP helpers"

This reverts commit 7fa678cc0a5648b5ea28629a2d21b9d4b6ac8f56, as the
commit it fixes will be reverted, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/17b6a2c5f3250a7d02ee1b517182ca6fd9baa45a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Revert "drm: fix DRM_DISPLAY_DP_HELPER dependencies, part 2"

This reverts commit a57e191ebbaa0363dbf352cc37447c2230573e29, as the
commits it fixes will be reverted, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/37216404c77b4c677d3b3a80d12d6d4447a3f3a0.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/panthor: Kill the faulty_slots variable in panthor_sched_suspend()

We can use upd_ctx.timedout_mask directly, and the faulty_slots update
in the flush_caches_failed situation is never used.

Suggested-by: Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425103920.826458-1-boris.brezillon@collabora.com

drm/xe: Merge 16021540221 and 18034896535 WAs

In order to detect duplicate implementations for the same workaround,
early in the implementation of RTP it was decided to error out even if
the values set are exactly the same. With the introduction of 18034896535
in commit 74671d23ca18 ("drm/xe/xe2: Add workaround 18034896535"), LNL
stepping with graphics stepping A1 now gives the following error on
module load:

xe 0000:00:02.0: [drm] *ERROR* GT0: [GT OTHER] \
discarding save-restore reg e48c (clear: 00000200, set: 00000200,\
masked: yes, mcr: yes): ret=-22

RTP may be improved in the future, but for now simply join the entries
like done with e.g. "1607297627, 1607030317, 1607186500".

Fixes: 74671d23ca18 ("drm/xe/xe2: Add workaround 18034896535")
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240427135339.3485559-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4caf410766add8cf376a3afc910b17dd0961dd75)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

drm/xe/vm: prevent UAF in rebind_work_func()

We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed.  The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.

v2:
 - Grabbing vm->lock in the preempt worker creates a deadlock, so
   checking the closed state is tricky. Instead flush the worker when
   the refcount reaches zero. It should be impossible to queue the
   preempt worker without already holding vm ref.

Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com
(cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

drm/xe: Fix unexpected backmerge results

The recent backmerge from drm-next to drm-xe-next brought with it
some silent unexpected results. One code snippet was added twice
and a partial revert had merge errors. Fix that up to
reinstate the affected code as it was before the backmerge.

v2:
- Commit log message rewording (Lucas DeMarchi)

Fixes: 79790b6818e9 ("Merge drm/drm-next into drm-xe-next")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423121114.39325-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 06e7139a034f26804904368fe4af2ceb70724756)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge tag 'drm-intel-next-2024-04-30' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next

Core DRM:
- Export drm_client_dev_unregister (Thomas Zimmermann)

Display i915:
- More initial work to make display code more independent from i915 (Jani)
- Convert i915/xe fbdev to DRM client (Thomas Zimmermann)
- VLV/CHV DPIO register cleanup (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZjFPcSCTd_5c0XU_@intel.com

drm/i915/dpio: Extract vlv_dpio_phy_regs.h

Pull the VLV/CHV DPIO PHY sideband registers to their own file.

v2: drop stray tabs (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Clean up the vlv/chv PHY register bits

Use REG_BIT() & co. for the vlv/chv DPIO PHY registers.

Note that DPIO_BIAS_CURRENT_CTL_SHIFT was incorrectly defined
to be 21 wheres 20 is the correct value. It is not used in the
code though so didn't bother splitting to a separate patch.

v2: drop stray tabs (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Clean up VLV/CHV DPIO PHY register defines

The DPIO PHY registers follow clear numbering rules. Express
those in a few macros to get rid of the hand calculated
final offsets.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Rename a few CHV DPIO PHY registers

Drop the leading underscore from the CHV PHY common lane
register definitions. We use these directly from actual
code so the underscore here is misleading as usually it indicates
an intermediate define that shouldn't be used directly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Give VLV DPIO group register a clearer name

Include _GRP in VLV DPIO PHY group access register define
names. Makes it more obvious where the accesses will land.
Also matches the naming used by BXT already.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Derive the phy from the port rather than pipe in encoder hooks

In the encoder hooks we are dealing primarily with the encoder,
so derive the DPIO PHY from the encoder rather than the pipe.
Technically this doesn't matter as we can't cross connect
pipes<->port across PHY boundaries, but it does conveny the
intention more accurately.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: s/pipe/ch/

Stop using 'pipe' directly as the DPIO PHY channel. This
does happen to work on VLV since it just has the one PHY
with CH0==pipe A and CH1==pipe B. But explicitly converting
the thing to the right enum makes the whole thing less
confusing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: s/port/ch/

Stop calling the DPIO PHY channel "port". Just say "ch", which
is already used in a bunch of places.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Rename some variables

Use a consistent 'tmp' as the variable name for the register
values during rmw when we don't deal with multiple registers
in parallel.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Remove pointless variables from vlv/chv DPLL code

Drop all the local variables for the DPLL dividers for vlv/chv
and just consult the state directly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Fix VLV DPIO PLL register dword numbering

The spreadsheet defines the PLL register block as having
the dwords in the following order:

block   dwords    offsets
PLL1    0x0-0x7   0x00-0x1f
PLL2    0x0-0x7   0x20-0x3f
PLL1ext 0x10-0x1f 0x40-0x5f
PLL2ext 0x10-0x1f 0x60-0x7f

So dword indexes 0x8-0xf don't even exist. Renumber
our register defines to match.

Note that the spreadsheet used hex numbering whereas our
defiens are in decimal. Perhaps we should change that?

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: s/VLV_PLL_DW9_BCAST/VLV_PCS_DW17_BCAST/

VLV_PLL_DW9_BCAST is actually VLV_PCS_DW17_BCAST. The address
does kinda look like it goes to the PLL block on a first glance,
but broadcast is special and doesn't even exist for the PLL
(only PCS and TX have it).

The fact that we use a broadcast write here is a bit sketchy
IMO since we're now blasting the register to all PCS splines
across the whole PHY. So the PCS registers in the other channel
(ie. other pipe/port) will also be written. But I guess the
fact that we always write the same value should make this a nop
even if the other channel is already enabled (assuming the VBIOS/GOP
didn't screw up and use some other value...).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: s/VLV_REF_DW13/VLV_REF_DW11/

Our VLV_REF_DW13 is actually VLV_REF_DW11. Rename it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dpio: Remove pointless VLV_PCS01_DW8 read

We don't use the result of the VLV_PCS01_DW8 read at all,
so don't read.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: pass dev_priv explicitly to PIPE_WGC_C22

Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C22 register macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0a07f615c574040094b37c861078e41daf53c706.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: pass dev_priv explicitly to PIPE_WGC_C21_C20

Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C21_C20 register macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af39047d304f8a5c3c7a643f702f66c06ea5d638.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: pass dev_priv explicitly to PIPE_WGC_C12

Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C12 register macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62a748b685f253151b17c101dec75351577f30c0.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: pass dev_priv explicitly to PIPE_WGC_C11_C10

Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C11_C10 register macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3f7aae89cf63760bca43b54102c76b3ed2cf8735.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: pass dev_priv explicitly to PIPE_WGC_C02

Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C02 register macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/550d4e787445802236f0bf89e4d2f4f32cbd6d75.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: pass dev_priv explicitly to PIPE_WGC_C01_C00

Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C01_C00 register macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85b3db6e666a7a629b10b482b7e7043d52d30511.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: pass dev_priv explicitly to PALETTE

Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PALETTE register macro.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf07d29cefef23ebd5d54fbb0d3bf7e41d132d93.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'amd-drm-next-6.10-2024-04-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.10-2024-04-26:

amdgpu:
- Misc code cleanups and refactors
- Support setting reset method at runtime
- Report OD status
- SMU 14.0.1 fixes
- SDMA 4.4.2 fixes
- VPE fixes
- MES fixes
- Update BO eviction priorities
- UMSCH fixes
- Reset fixes
- Freesync fixes
- GFXIP 9.4.3 fixes
- SDMA 5.2 fixes
- MES UAF fix
- RAS updates
- Devcoredump updates for dumping IP state
- DSC fixes
- JPEG fix
- Fix VRAM memory accounting
- VCN 5.0 fixes
- MES fixes
- UMC 12.0 updates
- Modify contiguous flags handling
- Initial support for mapping kernel queues via MES

amdkfd:
- Fix rescheduling of restore worker
- VRAM accounting for SVM migrations
- mGPU fix
- Enable SQ watchpoint for gfx10

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426221245.1613332-1-alexander.deucher@amd.com

Merge tag 'drm-intel-gt-next-2024-04-26' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next

UAPI Changes:

- drm/i915/guc: Use context hints for GT frequency

    Allow user to provide a low latency context hint. When set, KMD
    sends a hint to GuC which results in special handling for this
    context. SLPC will ramp the GT frequency aggressively every time
    it switches to this context. The down freq threshold will also be
    lower so GuC will ramp down the GT freq for this context more slowly.
    We also disable waitboost for this context as that will interfere with
    the strategy.

    We need to enable the use of SLPC Compute strategy during init, but
    it will apply only to contexts that set this bit during context
    creation.

    Userland can check whether this feature is supported using a new param-
    I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
    enabled platforms as they use SLPC for frequency management.

    The Mesa usage model for this flag is here -
    https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint

- drm/i915/gt: Enable only one CCS for compute workload

    Enable only one CCS engine by default with all the compute sices
    allocated to it.

    While generating the list of UABI engines to be exposed to the
    user, exclude any additional CCS engines beyond the first
    instance

    ***

    NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by
    default to mitigate a hardware bug. All the EUs will still remain
    usable, and all the userspace drivers have been confirmed to be able
    to dynamically detect the change in number of CCS engines and adjust.

    For the smaller percent of applications that get perf benefit from
    letting the userspace driver dispatch across all 4 CCS engines we will
    be introducing a sysfs control as a later patch to choose 4 CCS each
    with 25% EUs (or 50% if 2 CCS).

    NOTE: A regression has been reported at

    https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895

    However Andi has been triaging the issue and we're closing in a fix
    to the gap in the W/A implementation:

    https://lists.freedesktop.org/archives/intel-gfx/2024-April/348747.html

Driver Changes:

- Add new and fix to existing workarounds: Wa_14018575942 (MTL),
  Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438,
  Wa_14020495402 (Gen12.70) (Tejas, John, Lucas)
- Fix UAF on destroy against retire race and remove two earlier
  partial fixes (Janusz)
- Limit the reserved VM space to only the platforms that need it (Andi)
- Reset queue_priority_hint on parking for execlist platforms (Chris)
- Fix gt reset with GuC submission is disabled (Nirmoy)
- Correct capture of EIR register on hang (John)

- Remove usage of the deprecated ida_simple_xx() API
- Refactor confusing __intel_gt_reset() (Nirmoy)
- Fix the fix for GuC reset lock confusion (John)
- Simplify/extend platform check for Wa_14018913170 (John)
- Replace dev_priv with i915 (Andi)
- Add and use gt_to_guc() wrapper (Andi)
- Remove bogus null check (Rodrigo, Dan)

. Selftest improvements (Janusz, Nirmoy, Daniele)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZitVBTvZmityDi7D@jlahtine-mobl.ger.corp.intel.com

Merge v6.9-rc6 into drm-next

Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas
has some fun with i915-gem conflicts.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/display: split out intel_sprite_regs.h from i915_reg.h

Clean up i915_reg.h.

v2: Drop a redundant comment (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/679b7395a78c53006ac07448706f1809b74810de.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: split out intel_fbc_regs.h from i915_reg.h

Clean up i915_reg.h.

v2: Drop chicken regs and comments (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa9b5d8adefbe97e1e37c9cfada3ab1581b0e8d5.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/color: move palette registers to intel_color_regs.h

For some reason the paletter registers were missed when adding
intel_color_regs.h. Finish the job. Adjust some comments while at it.

v2: Fix comments (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1322f577b113b8fc1a6c2ef35340fc3c599b4bcb.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/audio: move LPE audio regs to intel_audio_regs.h

There are too few registers to warrant a dedicated file for LPE audio
regs, but the audio reg file is better than i915_reg.h.

v2: Rebase

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b5ee35309b2e0905aaa12d944b3d379c45a8a0bd.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Linux 6.9-rc6

Merge tag 'sched-urgent-2024-04-28' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:

 - Fix EEVDF corner cases

 - Fix two nohz_full= related bugs that can cause boot crashes
   and warnings

* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
  sched/isolation: Prevent boot crash when the boot CPU is nohz_full
  sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
  sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
  sched/eevdf: Always update V if se->on_rq when reweighting

Merge tag 'x86-urgent-2024-04-28' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:

 - Make the CPU_MITIGATIONS=n interaction with conflicting
   mitigation-enabling boot parameters a bit saner.

 - Re-enable CPU mitigations by default on non-x86

 - Fix TDX shared bit propagation on mprotect()

 - Fix potential show_regs() system hang when PKE initialization
   is not fully finished yet.

 - Add the 0x10-0x1f model IDs to the Zen5 range

 - Harden #VC instruction emulation some more

* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
  cpu: Re-enable CPU mitigations by default for !X86 architectures
  x86/tdx: Preserve shared bit on mprotect()
  x86/cpu: Fix check for RDPKRU in __show_regs()
  x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
  x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler

Merge tag 'irq-urgent-2024-04-28' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Ingo Molnar:
 "Fix a double free bug in the init error path of the GICv3 irqchip
  driver"

* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Prevent double free on error

sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU

housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.

For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.

Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.

Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().

And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.

Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com

sched/isolation: Prevent boot crash when the boot CPU is nohz_full

Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:

  08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").

However after:

  aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")

the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.

Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.

This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.

There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).

Fixes: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/

Merge tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux

Pull Rust fixes from Miguel Ojeda:

 - Soundness: make internal functions generated by the 'module!' macro
   inaccessible, do not implement 'Zeroable' for 'Infallible' and
   require 'Send' for the 'Module' trait.

 - Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.

 - Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.

 - Code docs: remove non-existing key from 'module!' macro example.

 - Docs: trivial rendering fix in arch table.

* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
  rust: remove `params` from `module` macro example
  kbuild: rust: force `alloc` extern to allow "empty" Rust files
  kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
  rust: kernel: require `Send` for `Module` implementations
  rust: phy: implement `Send` for `Registration`
  rust: make mutually exclusive with CFI_CLANG
  rust: macros: fix soundness issue in `module!` macro
  rust: init: remove impl Zeroable for Infallible
  docs: rust: fix improper rendering in Arch Support page
  rust: don't select CONSTRUCTORS

Merge tag 'riscv-for-linus-6.9-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
   separation

 - A fix to avoid loading rv64/NOMMU kernel past the start of RAM

 - A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
   overflow in the bitmask

 - The sud_test kselftest has been fixed to properly swizzle the syscall
   number into the return register, which are not the same on RISC-V

 - A fix for a build warning in the perf tools on rv32

 - A fix for the CBO selftests, to avoid non-constants leaking into the
   inline asm

 - A pair of fixes for T-Head PBMT errata probing, which has been
   renamed MAE by the vendor

* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
  perf riscv: Fix the warning due to the incompatible type
  riscv: T-Head: Test availability bit before enabling MAE errata
  riscv: thead: Rename T-Head PBMT to MAE
  selftests: sud_test: return correct emulated syscall value on RISC-V
  riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
  riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
  riscv: Fix TASK_SIZE on 64-bit NOMMU

Merge tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
 "Three smb3 client fixes, all also for stable:

   - two small locking fixes spotted by Coverity

   - FILE_ALL_INFO and network_open_info packing fix"

* tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix lock ordering potential deadlock in cifs_sync_mid_result
  smb3: missing lock when picking channel
  smb: client: Fix struct_group() usage in __packed structs

Merge tag 'i2c-for-6.9-rc6' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Fix a race condition in the at24 eeprom handler, a NULL pointer
  exception in the I2C core for controllers only using target modes,
  drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"

* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: smbus: fix NULL function pointer dereference
  MAINTAINERS: Drop entry for PCA9541 bus master selector
  eeprom: at24: fix memory corruption race condition
  dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema

profiling: Remove create_prof_cpu_mask().

create_prof_cpu_mask() is no longer used after commit 1f44a225777e ("s390:
convert interrupt handling to use generic hardirq").

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'soundwire-6.9-fixes' of git://git./linux/kernel/git/vkoul/soundwire

Pull soundwire fix from Vinod Koul:

 - Single AMD driver fix for wake interrupt handling in clockstop mode

* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: amd: fix for wake interrupt handling for clockstop mode

Merge tag 'dmaengine-fix-6.9' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:

 - Revert pl330 issue_pending waits until WFP state due to regression
   reported in Bluetooth loading

 - Xilinx driver fixes for synchronization, buffer offsets, locking and
   kdoc

 - idxd fixes for spinlock and preventing the migration of the perf
   context to an invalid target

 - idma driver fix for interrupt handling when powered off

 - Tegra driver residual calculation fix

 - Owl driver register access fix

* tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
  dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
  dmaengine: xilinx: xdma: Fix synchronization issue
  dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
  dma: xilinx_dpdma: Fix locking
  dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
  idma64: Don't try to serve interrupts when device is powered off
  dmaengine: tegra186: Fix residual calculation
  dmaengine: owl: fix register access functions
  dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"

Merge tag 'phy-fixes-6.9' of git://git./linux/kernel/git/phy/linux-phy

Pull phy fixes from Vinod Koul:

 - static checker (array size, bounds) fix for marvel driver

 - Rockchip rk3588 pcie fixes for bifurcation and mux

 - Qualcomm qmp-compbo fix for VCO, register base and regulator name for
   m31 driver

 - charger det crash fix for ti driver

* tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered
  phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
  phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONAL
  phy: qcom: m31: match requested regulator name with dt schema
  phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODE
  phy: qcom: qmp-combo: Fix VCO div offset on v3
  phy: rockchip: naneng-combphy: Fix mux on rk3588
  phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits
  phy: rockchip-snps-pcie3: fix bifurcation on rk3588
  phy: freescale: imx8m-pcie: fix pcie link-up instability
  phy: marvell: a3700-comphy: Fix hardcoded array size
  phy: marvell: a3700-comphy: Fix out of bounds read

i2c: smbus: fix NULL function pointer dereference

Baruch reported an OOPS when using the designware controller as target
only. Target-only modes break the assumption of one transfer function
always being available. Fix this by always checking the pointer in
__i2c_transfer.

Reported-by: Baruch Siach <baruch@tkos.co.il>
Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il
Fixes: 4b1acc43331d ("i2c: core changes for slave support")
[wsa: dropped the simplification in core-smbus to avoid theoretical regressions]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>

Merge tag 'soc-fixes-6.9-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
  Microchip and NXP, addressing both build-time warnings and bugs found
  during runtime testing.

  Most of these changes are machine specific fixups, but there are a few
  notable regressions that affect an entire SoC:

   - The Qualcomm MSI support that was improved for 6.9 ended up being
     wrong on some chips and now gets fixed.

   - The i.MX8MP camera interface broke due to a typo and gets updated
     again.

  The main driver fix is also for Qualcomm platforms, rewriting an
  interface in the QSEECOM firmware support that could lead to crashing
  the kernel from a trusted application.

  The only other code changes are minor fixes for Mediatek SoC drivers"

* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  ARM: dts: imx6ull-tarragon: fix USB over-current polarity
  soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
  soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
  arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
  ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
  ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
  arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
  arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
  arm64: dts: qcom: sm8650: Fix the msi-map entries
  arm64: dts: qcom: sm8550: Fix the msi-map entries
  arm64: dts: qcom: sm8450: Fix the msi-map entries
  arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
  arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
  arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
  arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
  dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
  arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
  arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
  ...

drm/amd/display: Add some HDCP registers DCN35 list

Add some missing HDCP registers to be used in DCN35.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes11: update ADD_QUEUE interface

Update ADD_QUEUE interface for mes11 to support
mes mapping legacy queue.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the warning about the expression (int)size - len

Converting size from size_t to int may overflow.
v2: keep reverse xmas tree order (Christian)

Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: add mes mapping legacy queue support

Add mes mapping legacy queue framework support.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix uninitialized scalar variable warning

Clear warning that uses uninitialized value fw_size.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Code style adjustments

This commit address some small code style issues in DC.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust registers sequence in the DIO list

This commit reorganizes the order in which some control registers are
presented to make it easier to identify the operations based on the
hardware doc.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up code in DC

This commit removes some unnecessary code and makes the required
adjustments to replace other parts of the code with a short option.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip ip dump if devcoredump flag is set

Do not dump the ip registers during driver reload
in passthrough environment.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Modify the contiguous flags behaviour

Now we have two flags for contiguous VRAM buffer allocation.
If the application request for AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS,
it would set the ttm place TTM_PL_FLAG_CONTIGUOUS flag in the
buffer's placement function.

This patch will change the default behaviour of the two flags.

When we set AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS
- This means contiguous is not mandatory.
- we will try to allocate the contiguous buffer. Say if the
  allocation fails, we fallback to allocate the individual pages.

When we setTTM_PL_FLAG_CONTIGUOUS
- This means contiguous allocation is mandatory.
- we are setting this in amdgpu_bo_pin_restricted() before bo validation
  and check this flag in the vram manager file.
- if this is set, we should allocate the buffer pages contiguously.
  the allocation fails, we return -ENOSPC.

v2:
  - keep the mem_flags and bo->flags check as is(Christian)
  - place the TTM_PL_FLAG_CONTIGUOUS flag setting into the
    amdgpu_bo_pin_restricted function placement range iteration
    loop(Christian)
  - rename find_pages with amdgpu_vram_mgr_calculate_pages_per_block
    (Christian)
  - Keep the kernel BO allocation as is(Christain)
  - If BO pin vram allocation failed, we need to return -ENOSPC as
    RDMA cannot work with scattered VRAM pages(Philip)

v3(Christian):
  - keep contiguous flag handling outside of pages_per_block
    calculation
  - remove the hacky implementation in contiguous flag error
    handling code

v4(Christian):
  - use any variable and return value for non-contiguous
    fallback

v5: rebase to amd-staging-drm-next branch

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix uninitialized variables in DC

This fixes 29 UNINIT issues reported by Coverity.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>