iio: adc: ad7091r: Align arguments to function call parenthesis

Align arguments to function call open parenthesis to comply with the
Linux kernel coding style.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/fc71a82d3b4a6bc6f511f27451dbd7a3280a8c95.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7091r: Set alert bit in config register

The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7091r: Pass iio_dev to event handler

Previous version of ad7091r event handler received the ADC state pointer
and retrieved the iio device from driver data field with dev_get_drvdata().
However, no driver data have ever been set, which led to null pointer
dereference when running the event handler.

Pass the iio device to the event handler and retrieve the ADC state struct
from it so we avoid the null pointer dereference and save the driver from
filling the driver data field.

Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

scripts: checkpatch: Add __aligned to the list of attribute notes

Checkpatch presumes attributes marked with __aligned(alignment) are part
of a function declaration and throws a warning stating that those
compiler attributes should have an identifier name which is not correct.
Add __aligned compiler attributes to the list of attribute notes
so they don't cause warnings anymore.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Acked-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/1c5c93ecbd8c46a338b22a4ef52e51648e333c01.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: chemical: add support for Aosong AGS02MA

A simple driver for the TVOC (Total Volatile Organic Compounds)
sensor from Aosong: AGS02MA

Steps in reading the VOC sensor value over i2c:
  1. Read 5 bytes from the register `AGS02MA_TVOC_READ_REG` [0x00]
  2. The first 4 bytes are taken as the big endian sensor data with final
     byte being the CRC
  3. The CRC is verified and the value is returned over an
     `IIO_CHAN_INFO_RAW` channel as percents

Tested on Raspberry Pi Zero 2W

Datasheet: https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231215162312.143568-3-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: chemical: add aosong,ags02ma

Add bindings for Aosong AGS02MA TVOC sensor.

The sensor communicates over i2c with the default address 0x1a.
TVOC values can be read in the units of ppb and ug/m^3 at register 0x00.

Datasheet: https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231215162312.143568-2-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: vendor-prefixes: add aosong

Aosong Electronic Co., LTD. is a supplier for MEMS sensors such as AHT20
temperature and humidity sensor under the brand name Asair

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231215162312.143568-1-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: bmi088: update comments and Kconfig

update the comments and Kconfig file with more descriptive and
accurate information about newly added device: BMI085, BMI090L.

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: humidity: Add TI HDC302x support

Add device tree bindings for HDC3020/HDC3021/HDC3022 humidity and
temperature sensors.

Signed-off-by: Li peiyu <579lpy@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231211123101.9868-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: humidity: Add driver for ti HDC302x humidity sensors

Add support for HDC302x integrated capacitive based relative
humidity (RH) and temperature sensor.
This driver supports reading values, reading the maximum and
minimum of values and controlling the integrated heater of
the sensor.

Co-developed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Li peiyu <579lpy@gmail.com>
Link: https://lore.kernel.org/r/20231211122940.9791-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: ABI: document temperature and humidity peak/trough raw attributes

The in_temp_peak_raw attribute is already in use, but its documentation
is still missing. The in_humidityrelative_raw must be documented for a
new iio user that supports this attribute. Add temp and humidityrelative
use cases.
When at it, remove an extra blank space in the description.

For users that support minimum values, a new in_<type>_trough_raw
attribute is required. Add this attribute and document the first uses of
it for temp and humidityrelative types.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231211122840.9760-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: introduce trough info element for minimum values

The IIO_CHAN_INFO_PEAK info element is used for maximum values and
currently there is no equivalent for minimum values. Instead of
overloading the existing peak info element, a new info element can
be added.

In principle there is no need to add a _TROUGH_SCALE element as the
scale will be the same as the one required for INFO_PEAK, which in
turn is sometimes omitted if a single scale for peaks and raw values
is required.

Add an IIO_CHAN_INFO_TROUGH info element for minimum values.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231211122747.9723-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: driver for Lite-On ltr390

Implements driver for the Ambient/UV Light sensor LTR390.
The driver exposes two ways of getting sensor readings:
  1. Raw UV Counts directly from the sensor
  2. The computed UV Index value with a percision of 2 decimal places

[NOTE] Ambient light sensing has not been implemented yet.

Driver tested on RPi Zero 2W

Datasheet: https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231208102211.413019-2-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: add ltr390

Add binding for Lite-On LTR390 which is an Ambient/UV light sensor that
communicates over i2c with an address of 0x53.

Datasheet: https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231208102211.413019-1-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: isl76682: remove unreachable code

The function isl76682_read_raw cannot execute return -EINVAL up to 145
lines, delete the invalid code.

drivers/iio/light/isl76682.c:145 isl76682_read_raw() warn: ignoring unreachable code.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7698
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231208021715.32450-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: driver for Honeywell HSC/SSC series

Adds driver for digital Honeywell TruStability HSC and SSC series
pressure and temperature sensors.
Communication is one way. The sensor only requires 4 bytes worth of
clock pulses on both i2c and spi in order to push the data out.
The i2c address is hardcoded and depends on the part number.
There is no additional GPIO control.
code is now based on iio/togreg

Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC]
Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC]

Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231207164634.11998-2-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: pressure: add honeywell,hsc030

Adds binding for digital Honeywell TruStability HSC and SSC series
pressure and temperature sensors.
Communication is one way. The sensor only requires 4 bytes worth of
clock pulses on both i2c and spi in order to push the data out.
The i2c address is hardcoded and depends on the part number.
There is no additional GPIO control.
driver is based on iio/togreg

Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC]
Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC]

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231207164634.11998-1-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

doc: iio: Document intensity scale as poorly defined

Add comment about intensity scale being poorly defined and
having no proper units.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231207134200.329174-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: temperature: add MLX90635 device

Add device tree bindings for MLX90635 Infra Red contactless temperature
sensor.

Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/0313c3b9f7490c32891627feb5ef35d5e5d9aae9.1701872051.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: mlx90635 MLX90635 IR Temperature sensor

MLX90635 is an Infra Red contactless temperature sensor most suitable
for consumer applications where measured object temperature is in range
between -20 to 100 degrees Celsius. It has improved accuracy for
measurements within temperature range of human body and can operate in
ambient temperature range between -20 to 85 degrees Celsius.

Driver provides simple power management possibility as it returns to
lowest possible power mode (Step sleep mode) in which temperature
measurements can still be performed, yet for continuous measuring it
switches to Continuous power mode where measurements constantly change
without triggering.

Signed-off-by: Crt Mori<cmo@melexis.com>
Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: adi-axi-adc: convert to regmap

Use MMIO regmap interface. It makes things easier for manipulating bits.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-8-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: use the more common !val NULL check

Check !val instead of directing checking for NULL (val == NULL).
No functional changes intended.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-7-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: use chip_info variables instead of array

Instead of having an array and keeping IDs for each entry of the array,
just have a chip_info struct per device.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-6-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: use spi_get_device_match_data()

Make use of spi_get_device_match_data() to simplify things.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-5-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: fix scale setting

When reading in_voltage_scale we can get something like:

root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146

However, when reading the available options:

root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010

which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.

While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: add mutex to struct ad9467_state

When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-3-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: don't ignore error codes

Make sure functions that return errors are not ignored.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: fix reset gpio handling

The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.

While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: mcp3911: simplify code with guard macro

Use the guard(mutex) macro for handle mutex lock/unlocks.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20231206-mcp3911-guard-v4-1-30c3c5d4340f@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: pa1203001: Drop ACPI_PTR() protection.

The extra cost of always including the acpi_device_id table is trivial
vs the complexity of adding guards or __maybe_unused markings so
just stop using the ACPI_PTR() macro.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311160851.FDA4CDVE-lkp@intel.com/
Link: https://lore.kernel.org/r/20231116192711.366441-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: qcom,spmi-vadc: clean up examples

Clean up the VADC examples by dropping a comment, dropping unnecessary
labels and adding newline separators.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231130171628.12257-7-johan+linaro@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: qcom,spmi-vadc: fix example node names

The VADC is a child of an SPMI PMIC, which in turn sits on an SPMI bus.

Fixes: 74e903461b17 ("dt-bindings: iio: adc: qcom,spmi-vadc: extend example")
Fixes: 5a471662b5d9 ("iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231130171628.12257-6-johan+linaro@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: qcom,spmi-rradc: clean up example

Clean up the RRADC example by dropping an unnecessary label and removing
stray white space.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231130171628.12257-5-johan+linaro@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: qcom,spmi-iadc: clean up example

Clean up the IADC example by adding a newline separator, dropping an
unnecessary label and removing stray white space.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231130171628.12257-4-johan+linaro@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: qcom,spmi-iadc: fix example node name

The IADC is a child of an SPMI PMIC, which in turn sits on an SPMI bus.

Fixes: a4e6bf69418c ("dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion.")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231130171628.12257-3-johan+linaro@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: qcom,spmi-iadc: fix reg description

The IADC register is just the base address in the SPMI PMIC and does not
include any length.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231130171628.12257-2-johan+linaro@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: isl76682: Add ISL76682 driver

The ISL76682 is very basic ALS which only supports ALS or IR mode
in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
other fancy functionality.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231127212726.77707-2-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: isl76682: Document ISL76682

The ISL76682 is very basic ALS which only supports ALS or IR mode
in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
other fancy functionality. Document it as trivial device.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231127212726.77707-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: add VEML6075 UVA and UVB light sensor driver

The Vishay VEMl6075 is a low power, 16-bit resolution UVA and UVB
light sensor with I2C interface and noise compensation (visible and
infrarred).

Every UV channel generates an output signal measured in counts per
integration period, where the integration time is configurable.

This driver adds support for both UV channels and the ultraviolet
index (UVI) inferred from them according to the device application note
with open-air (no teflon) coefficients.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-3-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: add support for Vishay VEML6075

The Vishay VEML6075 is a 16-bit digital UVA and UVB sensor with I2C
interface.

Add bindings and an example for the Vishay VEML6075.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-2-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: add modifiers for A and B ultraviolet light

Currently there are only two modifiers for ultraviolet light: a generic
one for any ultraviolet light (IIO_MOD_LIGHT_UV) and one for deep
ultraviolet (IIO_MOD_LIGHT_DUV), which is also referred as ultraviolet
C (UV-C) band and covers short-wave ultraviolet.

There are still no modifiers for the long-wave and medium-wave
ultraviolet bands. These two bands are the main components used to
obtain the UV index on the Earth's surface.

Add modifiers for the ultraviolet A (UV-A) and ultraviolet B (UV-B)
bands.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-1-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: irsd200: Drop unused include

The driver includes the legacy GPIO header <linux/gpio.h> but doesn't
use any symbols from it. Drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/20231128-descriptors-iio-v1-1-da1e94755db6@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio/adc: ti,palmas-gpadc: Drop incomplete example

The example for the TI Palmas ADC is incomplete as the binding is the
full PMIC, not just the sub-functions. It is preferred for MFD examples
to be complete in the top-level MFD device binding rather than piecemeal
in each sub-function binding.

This also fixes an undocumented (by schema) compatible warning for
'"ti,twl6035-pmic", "ti,palmas-pmic"'.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128214803.3975542-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ad5791: Add support for controlling RBUF via devicetree

This patch adds support for an external amplifier to be connected in a
gain of two configuration.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231129-ad5791-michael-stuff-v3-2-48e192b00909@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: adi,ad5791: Add support for controlling RBUF

Added new property to support an external amplifier to be connected in a
gain of two configuration.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231129-ad5791-michael-stuff-v3-1-48e192b00909@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure properties

The dtschema treats now properties with '-pascal' suffix as standard one
and already defines $ref for them, thus the $ref should be dropped from
the bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231129111041.26782-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: bmi323: Make the local structures static

Make the local structures static within their respective driver files.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311070530.qKhLTz1Y-lkp@intel.com/
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20231108035831.5889-1-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: ltrf216a: Return floating point values

For better precision of input light intesity, return floating point
values through sysfs instead of an integer value

Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Link: https://lore.kernel.org/r/20231107192005.285534-1-shreeya.patel@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: return callee's error code rather than -EINVAL

regmap_bulk_write()/regmap_bulk_read() return zero or negative error
code, return the callee's error code is better than '-EINVAL'.

Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231030020752.67630-1-suhui@nfschina.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator

This adds support for the Analog Devices ADRF5740 2 dB LSB, 4-Bit,
Silicon Digital Attenuator, 10 MHz to 60 GHz.
The default (maximum) gain is also set at probe time, with GPIO lines
driven high to achieve maximum gain, in contrast to other devices
where GPIOs need to be driven low.

Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Link: https://lore.kernel.org/r/20231113102535.51074-2-anamaria.cuscoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator

The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB
attenuation control range in 2 dB steps.

Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231113102535.51074-3-anamaria.cuscoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: improve section MICROCHIP MCP3564 ADC DRIVER

Commit 33ec3e5fc1ea ("iio: adc: adding support for MCP3564 ADC") adds a new
iio driver and corresponding MAINTAINERS section. It however uses spaces
instead of a single tab for all the entries in that MAINTAINERS section.

Although, the get_maintainer.pl script handles spaces instead of tabs
silently, the MAINTAINERS will quickly get into a messy state with
different indentations throughout the file. So, the checkpatch.pl script
complains when spaces instead of a single tab are used.

Fix this recently added section using tabs instead of spaces.
Further, add the driver's ABI documentation file to this section as well.

Fixes: 33ec3e5fc1ea ("iio: adc: adding support for MCP3564 ADC")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20231122075629.21411-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: document known issue

Add documentation explaining why the code which scans all available scan
masks is checking only a single long worth of bits even though the code
was intended to be supporting masks wider than single long.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ef61c2c1e9a1c5e9f713f656871fdcb1652afdc2.1697452986.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: sanity check available_scan_masks array

When IIO goes through the available scan masks in order to select the
best suiting one, it will just accept the first listed subset of channels
which meets the user's requirements. If driver lists a mask which is a
subset of some of the masks previously in the array of
avaliable_scan_masks, then the latter one will never be selected.

Add a warning if driver registers masks which can't be used due to the
available_scan_masks-array ordering.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/e55ef0b26a6d3b323bab24920c131c79a01ba08e.1697452986.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property

The adis16460 device requires a stall time between SPI
transactions (during which the chip select is inactive),
with a minimum value equal to 16 microseconds.
This commit adds 'spi-cs-inactive-delay-ns' property, which should
indicate the stall time between consecutive SPI transactions.
The specified minimum time may not be sufficient for all
configurations.

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231027140358.328699-4-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property

The devices supported by adis16475 driver require a stall period
between SPI transactions (during which the chip select is
inactive), with a minimum value equal to 16 microseconds, thus
adding 'spi-cs-inactive-delay-ns' property, which should indicate
the stall time between consecutive SPI transactions.
The specified minimum time may not be sufficient for all
configurations.

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231027140358.328699-3-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: adis: Use spi cs inactive delay

A delay is needed each time the chip selected becomes inactive,
even after burst data readings are performed.
Currently, there is no delay added after a burst reading
and in case a new SPI transfer is performed before
the needed delay, the adis device becomes unresponsive until
reset.

This commit is adding the needed delay directly to the spi driver,
using the cs_inactive parameter, in case it is not set and is
removing the additional chip select change delay present in adis
APIs to remove the double delay.

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Link: https://lore.kernel.org/r/20231027140358.328699-2-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio/imu: inv_icm42600: Use max() helper macros

Use the standard max() helper macros instead of direct variable comparison
using if/else blocks or ternary operator. Change identified using
minmax.cocci Coccinelle semantic patch.

Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20231027094410.3706-1-bragathemanick0908@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: Add MCP9600 thermocouple EMF converter

Add support for the MCP9600 thermocouple electromotive force converter. The sensor has  integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius.

Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf
Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev>
Link: https://lore.kernel.org/r/20231025233153.5454-2-andrew.hepp@ahepp.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: Add MCP9600 thermocouple EMF converter

Add support for the MCP9600 thermocouple electromotive force converter. The sensor has  integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius.

Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf
Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231025233153.5454-1-andrew.hepp@ahepp.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer"

There are two spelling mistakes in dev_err messages. Fix them.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20231023081054.617292-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Add support for BMP390

Add BMP390 device ID to the supported IDs on bmp380 sensor family

Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Link: https://lore.kernel.org/r/d6a9e9ca4670c7401545d0d086cd3059e29044c8.1697994521.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Allow multiple chips id per family of devices

Improve device detection in certain chip families known to have
various chip IDs. When no ID matches, give a warning but follow
along what device said on the firmware side and try to configure
it.

Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Link: https://lore.kernel.org/r/eade22d11e9de4405ea19fdaa5a8249143ae94df.1697994521.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Rearrange vars in reverse xmas tree order

Small cleanup reordering local variable declarations following reverse
christmas tree convention.

Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/bb63a996eb9c4555bf83471770f0169d2627e79c.1697994521.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Use spi_get_device_match_data()

Use the spi_get_device_match_data() helper instead of
device_get_match_data() and the fallback match_id logic.

Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/9ea8ac90b2b8a8cf45803d0435243c0bee009b37.1697994521.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Use i2c_get_match_data()

Replace device_get_match_data() and id lookup for retrieving match data
by i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/0554ddae62ba04ccacf58c2de04ec598c876665e.1697994521.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVER

Commit b512c767e7bc ("iio: imu: Add driver for BMI323 IMU") adds the
MAINTAINERS section BOSCH SENSORTEC BMI323 IMU IIO DRIVER and refers to a
non-existing device-tree file.

Probably, this mistake was introduced by copying from the BOSCH SENSORTEC
BMA400 ACCELEROMETER IIO DRIVER section and missing to adjust the file
entry properly. This is however easily caught, as the script
./scripts/get_maintainer.pl --self-test=patterns complains about a broken
reference.

The related commit 77583938740e ("dt-bindings: iio: imu: Add Bosch BMI323")
adds bosch,bmi323.yaml, so refer to that intended file instead.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20231025091550.21052-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS

Commit ca11e4a35154 ("MAINTAINERS: Add IIO gain-time-scale helpers"),
updates the MAINTAINERS file. However the files listed do not exist.
These presumably come from commit 38416c28e168 ("iio: light: Add
gain-time-scale helpers")

Fix the entries.

Found by ./scripts/get_maintainer.pl --self-test=patterns

Fixes: ca11e4a35154 ("MAINTAINERS: Add IIO gain-time-scale helpers")
Signed-off-by: Amit Dhingra <mechanicalamit@gmail.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/CAO=gReFVhp7QK_XZRBO5vbv6fmFb4BdsZeQPSzWvuiz9UeQekA@mail.gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: bu27008: Add illuminance channel

The RGB + IR data can be used to calculate the illuminance value (luxes).
Implement the equation obtained from the ROHM HW colleagues and add a
raw light data channel outputting illuminance values in (nano) Luxes.

Both the read_raw and buffering values are supported, with the limitation
that buffering is only allowed when a suitable scan-mask is used. (RGB+IR,
no clear).

The equation has been developed by ROHM HW colleagues for open air sensor.
Adding any lens to the sensor is likely to impact to used c1, c2, c3
coefficients. Also, the output values have only been tested on BU27008.

According to the HW colleagues, the very same equation should work on
BU27010 as well.

Calculate and output illuminance values from BU27008 and BU27010.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ZTJcOxSb/WHzdN8h@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: fix some word spelling errors

They are appear to be spelling mistakes,
drivers/iio/pressure/bmp280.h:413        endianess->endianness
drivers/iio/pressure/bmp280-core.c:923   dregrees->degrees
drivers/iio/pressure/bmp280-core.c:1388  reescale->rescale
drivers/iio/pressure/bmp280-core.c:1415  reescale->rescale

Signed-off-by: Li peiyu <579lpy@gmail.com>
Link: https://lore.kernel.org/r/20231021070903.6051-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

mailmap: Change email mapping from previous employers

Signed-off-by: Matt Ranostay <matt@ranostay.sg>
Link: https://lore.kernel.org/r/20231021085250.21431-1-matt@ranostay.sg
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: sx9324: Switch to device_property_match_property_string()

Replace open coded device_property_match_property_string().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230808162800.61651-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: magnetometer: tmag5273: Switch to device_property_match_property_string()

Replace open coded device_property_match_property_string().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230808162800.61651-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: frequency: admv1014: Switch to device_property_match_property_string()

Replace open coded device_property_match_property_string().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230808162800.61651-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: frequency: adf4377: Switch to device_property_match_property_string()

Replace open coded device_property_match_property_string().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230808162800.61651-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

device property: Add fwnode_property_match_property_string()

Sometimes the users want to match the single value string property
against an array of predefined strings. Create a helper for them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230808162800.61651-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

device property: Use fwnode_property_string_array_count()

Use fwnode_property_string_array_count() instead of open coded variant.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230808162800.61651-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: resolver: ad2s1210: add reset gpio support

This adds support for the optional reset gpio to the ad2s1210 resolver
driver. If the gpio is present in the device tree, it is toggled during
driver probe before the reset of the device initialization. As per the
devicetree bindings, it is expected for the gpio to configured as active
low.

Suggested-by: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20231016154311.38547-1-dlechner@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: resolver: ad2s1210: add support for adi,fixed-mode

It is possible to use the AD2S1210 with hardwired mode pins (A0 and A1).
According to the devicetree bindings, in this case the adi,fixed-mode
property will specify which of the 3 possible modes the mode pins are
hardwired for and the gpio-modes property is not allowed.

This adds support for the case where the mode pins are hardwired for
config mode. In this configuration, the position and value must be read
from the config register.

The case of hardwired position or velocity mode is not supported as
there would be no way to configure the device.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231016135423.16808-1-dlechner@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: Add driver for BMI323 IMU

The Bosch BMI323 is a 6-axis low-power IMU that provide measurements for
acceleration, angular rate, and temperature. This sensor includes
motion-triggered interrupt features, such as a step counter, tap detection,
and activity/inactivity interrupt capabilities.

The driver supports various functionalities, including data ready, FIFO
data handling, and events such as tap detection, step counting, and
activity interrupts.

Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20231013034808.8948-3-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: Add Bosch BMI323

Add devicetree description document for Bosch BMI323, a 6-Axis IMU.

Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013034808.8948-2-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: Add driver support for MAX34408/9

The MAX34408/MAX34409 are two- and four-channel current monitors that are
configured and monitored with a standard I2C/SMBus serial interface. Each
unidirectional current sensor offers precision high-side operation with a
low full-scale sense voltage. The devices automatically sequence through
two or four channels and collect the current-sense samples and average them
to reduce the effect of impulse noise. The raw ADC samples are compared to
user-programmable digital thresholds to indicate overcurrent conditions.
Overcurrent conditions trigger a hardware output to provide an immediate
indication to shut down any necessary external circuitry.

Add as ADC driver which only supports current monitoring for now.

Link: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Link: https://lore.kernel.org/r/20231014211254.16719-3-fr0st61te@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: adc: provide max34408/9 device tree binding document

The hardware binding for i2c current monitoring device with overcurrent
control.

Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231014211254.16719-2-fr0st61te@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Linux 6.7-rc1

wifi: iwlwifi: fix system commands group ordering

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Merge tag 'powerpc-6.7-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Merge tag 'fbdev-for-6.7-rc1' of git://git./linux/kernel/git/deller/linux-fbdev

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

tracing/kprobes: Fix the order of argument descriptions

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps

Merge tag 'sound-fix-6.7-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for rc1.

  The majority of changes are various ASoC driver-specific small fixes
  and usual HD-audio quirks, while there are a couple of core changes: a
  fix in ALSA core procfs code to avoid deadlocks at disconnection and
  an ASoC core fix for DAPM clock widgets"

* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  OSS: dmasound/paula: Convert to platform remove callback returning void
  ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
  ALSA: info: Fix potential deadlock at disconnection
  ASoC: nau8540: Add self recovery to improve capture quility
  ALSA: hda/realtek: Add support dual speaker for Dell
  ALSA: hda: Add ASRock X670E Taichi to denylist
  ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
  ASoC: SOF: sof-client: trivial: fix comment typo
  ASoC: dapm: fix clock get name
  ASoC: hdmi-codec: register hpd callback on component probe
  ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
  ASoC: da7219: Improve system suspend and resume handling
  ASoC: codecs: Modify macro value error
  ASoC: codecs: Modify the wrong judgment of re value
  ASoC: codecs: Modify the maximum value of calib
  ASoC: amd: acp: fix for i2s mode register field update
  ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
  ASoC: rt712-sdca: fix speaker route missing issue
  ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
  ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings

Merge tag 'amd-drm-next-6.7-2023-11-10' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.7-2023-11-10:

amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com

Merge tag 'spi-fix-v6.7-merge-window' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A couple of fixes that came in during the merge window: one Kconfig
  dependency fix and another fix for a long standing issue where a sync
  transfer races with system suspend"

* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Fix null dereference on suspend
  spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies

Merge tag 'mmc-v6.7-2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix broken cache-flush support for Micron eMMCs
   - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'

  MMC host:
   - sdhci_am654: Fix TAP value parsing for legacy speed mode
   - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
   - vub300: Fix an error path in probe"

* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
  mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
  Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
  mmc: vub300: fix an error code
  mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
  mmc: sdhci_am654: fix start loop index for TAP value parsing

Merge tag 'pwm/for-6.7-rc1-fixes' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
 "This contains two very small fixes that I failed to include in the
  main pull request"

* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Fix double shift bug
  pwm: samsung: Fix a bit test in pwm_samsung_resume()

Merge tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
 "Mostly just a few fixes and cleanups caused by the read multishot
  support.

  Outside of that, a stable fix for how a connect retry is done"

* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
  io_uring: do not clamp read length for multishot read
  io_uring: do not allow multishot read to set addr or len
  io_uring: indicate if io_kbuf_recycle did recycle anything
  io_uring/rw: add separate prep handler for fixed read/write
  io_uring/rw: add separate prep handler for readv/writev
  io_uring/net: ensure socket is marked connected on connect retry
  io_uring/rw: don't attempt to allocate async data if opcode doesn't need it