hw/sd/sdcard: Trace requested address computed by sd_req_get_address()

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-6-philmd@linaro.org>

hw/sd/sdcard: Trace block offset in READ/WRITE data accesses

Useful to detect out of bound accesses.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-5-philmd@linaro.org>

hw/sd/sdcard: Track last command used to help logging

The command is selected on the I/O lines, and further
processing might be done on the DAT lines via the
sd_read_byte() and sd_write_byte() handlers. Since
these methods can't distinct between normal and APP
commands, keep the name of the current command in
the SDState and use it in the DAT handlers. This
fixes a bug that all normal commands were displayed
as APP commands.

Fixes: 2ed61fb57b ("sdcard: Display command name when tracing CMD/ACMD")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-4-philmd@linaro.org>

hw/sd/sdcard: Deprecate support for spec v1.10

We use the v2.00 spec by default since commit 2f0939c234
("sdcard: Add a 'spec_version' property, default to Spec v2.00").
Time to deprecate the v1.10 which doesn't bring much, and
is not tested.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240627071040.36190-2-philmd@linaro.org>

Merge tag 'pull-target-arm-20240701' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * tests/avocado: update firmware for sbsa-ref and use all cores
 * hw/arm/smmu-common: Replace smmu_iommu_mr with smmu_find_sdev
 * arm: Fix VCMLA Dd, Dn, Dm[idx]
 * arm: Fix SQDMULH (by element) with Q=0
 * arm: Fix FJCVTZS vs flush-to-zero
 * arm: More conversion of A64 AdvSIMD to decodetree
 * arm: Enable FEAT_Debugv8p8 for -cpu max
 * MAINTAINERS: Update family name for Patrick Leis
 * hw/arm/xilinx_zynq: Add boot-mode property
 * docs/system/arm: Add a doc for zynq board
 * hw/misc: In STM32L4x5 EXTI, correct configurable interrupts
 * tests/qtest: fix minor issues in STM32L4x5 tests

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaC1BMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3nDOEACCoewjO2FJ4RFXMSmgr0Zf
# jxWliu7osw7oeG4ZNq1+xMiXeW0vyS54eW41TMki1f98N/yK8v55BM8kBBvDvZaz
# R5DUXpN+MtwD9A62md3B2c4mFXHqk1UOGbKi4btbtFj4lS8pV51mPmApzBUr2iTj
# w6dCLciLOt87NWgtLECXsZ3evn+VlTRc+Hmfp1M/C/Rf2Qx3zis/CFHGQsZLGwzG
# 2WhTpU1BKeOfsQa1VbSX6un14d72/JATFZN3rSgMbOEbvsCEeP+rnkzX57ejGyxV
# 4DUx69gEAqS5bOfkQHLwy82WsunD/oIgp+GpYaYgINHzh6UkEsPoymrHAaPgV1Vh
# g0TaBtbv2p89RFY1C2W2Mi4ICQ14a+oIV9FPvDsOE8Wq+wDAy/ZxZs7G6flxqods
# s4JvcMqB3kUNBZaMsFVXTKdqT1PufICS+gx0VsKdKDwXcOHwMS10nTlEOPzqvoBA
# phAsEbjnjWVhf03XTfCus+l5NT96lswCzPcUovb3CitSc2A1KUye3TyzHnxIqmOt
# Owcl+Oiso++cgYzr/BCveTAYKYoRZzVcq5jCl4bBUH/8sLrRDbT0cpFpcMk72eE9
# VhR00kbkDfL3nKrulLsG8FeUlisX5+oGb3G5AdPtU9sqJPJMmBGaF+KniI0wi7VN
# 5teHq08upLMF5JAjiKzZIA==
# =faXD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:06:43 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240701' of https://git.linaro.org/people/pmaydell/qemu-arm: (29 commits)
  tests/qtest: Ensure STM32L4x5 EXTI state is correct at the end of QTests
  hw/misc: In STM32L4x5 EXTI, correct configurable interrupts
  tests/qtest: Fix STM32L4x5 SYSCFG irq line 15 state assumption
  docs/system/arm: Add a doc for zynq board
  hw/arm/xilinx_zynq: Add boot-mode property
  hw/misc/zynq_slcr: Add boot-mode property
  MAINTAINERS: Update my family name
  target/arm: Enable FEAT_Debugv8p8 for -cpu max
  target/arm: Move initialization of debug ID registers
  target/arm: Fix indentation
  target/arm: Delete dead code from disas_simd_indexed
  target/arm: Convert FCMLA to decodetree
  target/arm: Convert FCADD to decodetree
  target/arm: Add data argument to do_fp3_vector
  target/arm: Convert BFMMLA, SMMLA, UMMLA, USMMLA to decodetree
  target/arm: Convert BFMLALB, BFMLALT to decodetree
  target/arm: Convert BFDOT to decodetree
  target/arm: Convert SUDOT, USDOT to decodetree
  target/arm: Convert SDOT, UDOT to decodetree
  target/arm: Convert SQRDMLAH, SQRDMLSH to decodetree
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-xen-20240701' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging

Xen queue:

* Improvement for running QEMU in a stubdomain.
* Improve handling of buffered ioreqs.

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmaCq2IACgkQDPVXL9f7
# Va9PHQf+N4SGAo8rD6Nw7z73b9/Qd20Pz82Pm3BLnJtioxxOhVPU33HJsyjkQRSs
# dVckRZk6IFfiAKWTPDsQfeL+qDBjL15usuZCLeq7zRr5NwV5OOlSh6fW6yurY8IR
# zHoCJTjYcaXbMCVIzAXhM19rZjFZCLNFYb3ADRvDANaxbhSx60EAg69S8gQeQhgw
# BVC5inDxMGSl4X7i8eh+E39H8X1RKNg4GQyLWOVksdElQuKeGFMThaSCmA3OHkOV
# Ny70+PrCM3Z1sbUMI3lDHdT4f9JXcYqJbnCjCDHCZgOeF2Z5UEfFlPiVQIo4OA7o
# b48LbOuThEZew4SrJS9lx9RKafoFyw==
# =oLvq
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 06:13:06 AM PDT
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [undefined]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* tag 'pull-xen-20240701' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm:
  xen-hvm: Avoid livelock while handling buffered ioreqs
  xen: fix stubdom PCI addr
  hw/xen: detect when running inside stubdomain

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests/qtest: Ensure STM32L4x5 EXTI state is correct at the end of QTests

EXTI's new field `irq_levels` tracks irq levels between tests when using
`global_qtest`.
This happens in `stm32l4x5_exti-test.c`, `stm32l4x5_syscfg-test.c` and
`stm32l4x5_gpio-test.c` (`dm163.c` doesn't use `global_qtest`).

To ensure that `irq_levels` has the same value before and after each
QTest, this commit toggles back the irq lines that were changed at the
end of each problematic test. Most QTests were already doing this.

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-3-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: In STM32L4x5 EXTI, correct configurable interrupts

The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qtest: Fix STM32L4x5 SYSCFG irq line 15 state assumption

The QTest `test_irq_pin_multiplexer` makes the assumption that the
reset state of irq line 15 is low, which is false since STM32L4x5 GPIO
was implemented (the reset state of pin GPIOA15 is high because there's
pull-up and it results in the irq line 15 also being high at reset).

It wasn't triggering an error because `test_interrupt` was mistakenly
"resetting" the line low.

This commit corrects these two mistakes by :
- not setting the line low in `test_interrupt`
- using an irq line in `test_irq_pin_multiplexer` which is low at reset

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629104454.366283-1-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/system/arm: Add a doc for zynq board

Added the supported device list and an example command.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-4-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xilinx_zynq: Add boot-mode property

Read boot-mode value as machine property and propagate that to
SLCR.BOOT_MODE register.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/zynq_slcr: Add boot-mode property

boot-mode property sets user values into BOOT_MODE register, on hardware
these are derived from board switches.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-2-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Update my family name

Signed-off-by: Patrick Leis <venture@google.com>
Message-id: 20240626211623.3510701-1-venture@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Enable FEAT_Debugv8p8 for -cpu max

Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU
since it concerns the external debug interface for JTAG, but is
mandatory in Armv8.8 implementations, hence it is reported as supported
in the ID registers.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move initialization of debug ID registers

Move the initialization of the debug ID registers to aa32_max_features,
which is used to set the 32-bit ID registers. This ensures that the
debug ID registers are consistently set for the max CPU in a single
place.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-3-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix indentation

Fix comment indentation adding a missing space.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-2-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Delete dead code from disas_simd_indexed

MLA, MLS, SQDMULH, SQRDMULH, were converted with 8db93dcd3def
and f80701cb44d, and this code should have been removed then.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FCMLA to decodetree

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FCADD to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add data argument to do_fp3_vector

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert BFMMLA, SMMLA, UMMLA, USMMLA to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert BFMLALB, BFMLALT to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert BFDOT to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert SUDOT, USDOT to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert SDOT, UDOT to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert SQRDMLAH, SQRDMLSH to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xen-hvm: Avoid livelock while handling buffered ioreqs

A malicious or buggy guest may generated buffered ioreqs faster than
QEMU can process them in handle_buffered_iopage(). The result is a
livelock - QEMU continuously processes ioreqs on the main thread without
iterating through the main loop which prevents handling other events,
processing timers, etc. Without QEMU handling other events, it often
results in the guest becoming unsable and makes it difficult to stop the
source of buffered ioreqs.

To avoid this, if we process a full page of buffered ioreqs, stop and
reschedule an immediate timer to continue processing them. This lets
QEMU go back to the main loop and catch up.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240404140833.1557953-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>

xen: fix stubdom PCI addr

When running in a stubdomain, the config space access via sysfs needs to
use BDF as seen inside stubdomain (connected via xen-pcifront), which is
different from the real BDF. For other purposes (hypercall parameters
etc), the real BDF needs to be used.
Get the in-stubdomain BDF by looking up relevant PV PCI xenstore
entries.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <35049e99da634a74578a1ff2cb3ae4cc436ede33.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>

hw/xen: detect when running inside stubdomain

Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>

target/arm: Fix FJCVTZS vs flush-to-zero

Input denormals cause the Javascript inexact bit
(output to Z) to be set.

Cc: qemu-stable@nongnu.org
Fixes: 6c1f6f2733a ("target/arm: Implement ARMv8.3-JSConv")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2375
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-4-richard.henderson@linaro.org
[PMM: fixed hardcoded tab in test case]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix SQDMULH (by element) with Q=0

The inner loop, bounded by eltspersegment, must not be
larger than the outer loop, bounded by elements.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix VCMLA Dd, Dn, Dm[idx]

The inner loop, bounded by eltspersegment, must not be
larger than the outer loop, bounded by elements.

Cc: qemu-stable@nongnu.org
Fixes: 18fc2405781 ("target/arm: Implement SVE fp complex multiply add (indexed)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2376
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/smmu-common: Replace smmu_iommu_mr with smmu_find_sdev

The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config().

Do it directly instead of bridging with an iommu mr pointer.

Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20240619002218.926674-1-nicolinc@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/avocado: use default amount of cores on sbsa-ref

The version of the sbsa-ref EDK2 firmware we used to use in this test
had a bug where it might make an unaligned access to the framebuffer,
which causes a guest crash on newer versions of QEMU where we enforce
the architectural requirement that unaligned accesses to Device memory
should take an exception.

We happened to not notice this because our test was booting with "-smp
1" and through luck this didn't write the boot logo to the framebuffer
at an unaligned address; but trying to boot the same firmware with two
CPUs would result in a guest crash. Now we have updated the firmware
we're using for the test, we can make the test use all the cores on the
board, so we are testing the SMP boot path.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-2-29a3a2f1be1e@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/avocado: update firmware for sbsa-ref

Update firmware to have graphics card memory fix from EDK2 commit
c1d1910be6e04a8b1a73090cf2881fb698947a6e:

    OvmfPkg/QemuVideoDxe: add feature PCD to remap framebuffer W/C

    Some platforms (such as SBSA-QEMU on recent builds of the emulator) only
    tolerate misaligned accesses to normal memory, and raise alignment
    faults on such accesses to device memory, which is the default for PCIe
    MMIO BARs.

    When emulating a PCIe graphics controller, the framebuffer is typically
    exposed via a MMIO BAR, while the disposition of the region is closer to
    memory (no side effects on reads or writes, except for the changing
    picture on the screen; direct random access to any pixel in the image).

    In order to permit the use of such controllers on platforms that only
    tolerate these types of accesses for normal memory, it is necessary to
    remap the memory. Use the DXE services to set the desired capabilities
    and attributes.

    Hide this behavior under a feature PCD so only platforms that really
    need it can enable it. (OVMF on x86 has no need for this)

With this fix enabled we can boot sbsa-ref with more than one cpu core.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-1-29a3a2f1be1e@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Implement mailbox properties for customer OTP and device specific private keys

Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.

The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.

The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.

Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: Connect OTP device to BCM2835

Replace stubbed OTP memory region with the new OTP device.

Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvram: Add BCM2835 OTP device

The OTP device registers are currently stubbed. For now, the device
houses the OTP rows which will be accessed directly by other peripherals.

Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging

trivial patches for 2024-06-30

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmaBjTkACgkQcBtPaxpp
# PlmhAAf+PZEsiBvffwwNH5n1q39Hilih35p/GCVpNYKcLsFB6bLmt9A/x062NqTS
# ob1Uj134ofHlSQtNjP1KxXdriwc40ZMahkTO+x6gYc+IpoRJGTGYEA0MWh4gPPYK
# S6l/nOI9JK1x+ot+bQzGOzOjz3/S7RJteXzwOPlWQ7GChz8NIUPWV3DkcVP0AeT0
# 7Lq7GtDBSV5Jbne2IrvOGadjPOpJiiLEmLawmw1c9qapIKAu2wxNBMlO98ufsg6L
# hDFEg6K0CKvM9fcdK8UXhnMa+58QwHhoJT+Q00aQcU1xzu+ifi/CrmgbRCK5ruTA
# o0I8q6ONbK33cTzyZ/ZmKtoA8b/Rzw==
# =N3GX
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 30 Jun 2024 09:52:09 AM PDT
# gpg:                using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg:                 aka "Michael Tokarev <mjt@debian.org>" [full]
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>" [full]

* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
  hw/core/loader: gunzip(): fix memory leak on error path
  vl.c: select_machine(): add selected machine type to error message
  vl.c: select_machine(): use g_autoptr
  vl.c: select_machine(): use ERRP_GUARD instead of error propagation
  docs/system/devices/usb: Replace the non-existing "qemu" binary
  docs/cxl: fix some typos
  os-posix: Expand setrlimit() syscall compatibility
  net/can: Remove unused struct 'CanBusState'
  hw/arm/bcm2836: Remove unusued struct 'BCM283XClass'
  linux-user: sparc: Remove unused struct 'target_mc_fq'
  linux-user: cris: Remove unused struct 'rt_signal_frame'
  monitor: Remove obsolete stubs
  target/i386: Advertise MWAIT iff host supports
  vl: Allow multiple -overcommit commands
  cpu: fix memleak of 'halt_cond' and 'thread'
  hmp-commands-info.hx: Add missing info command for stats subcommand

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-ufs-20240630' of https://gitlab.com/jeuk20.kim/qemu into staging

hw/ufs: fix coverity issue

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmaA1MQACgkQEuIgTA5d
# tgIYSBAAul4qW0P6q0h3Dj/MLcGMPo4Y4kcWKe2AAkE/mBRvKbE7bLsA0y47WU5S
# MJJApw4lwCsM12ZcD0W3YNbNwGUclQAVhLU5TOMowwaEWjNwmcsBR+AVwya4M2jQ
# zSw6udIo5dfdy6KSe2EbRAuoDqBFJrcIH6EbXn/pBIhotlFzyUYYcpPBAq3rwh+V
# haEtt3DapAektx+QkswBNEWu002OHyNDQXqfHnFvNMAYN9T25Nr+REai3VhZj379
# F/p5bFxou9FnwuGXRrpS1Em1jT+gRJnYoxp6iML8Zb4eZLhFs7T3WWkXHhbq7Nbt
# oeg1CFdQeIt1iowk/dhtnSEQqnLe9dfPHj7pxU98dkYXHcN52Q5CRb+c0JnEyBLc
# lGIjLVWvqYitOwGmvIdSmStd5TCLtuYmQGaI3slZCvsJTSo4Tkx3eI504NTVQ4K2
# lNY0jb+0PIsEUlyssimlsDA0SCkbpe5yE1G2NDCP74MjG0mlUm/h/OU0etk7uhwv
# DNr1Lljr04FhcgVbMGX5sbMeK2QiCDuOlCF1T4zkzDFdWKIl414vH1wvjv1cBKlj
# RdAfAi8zIV5lOeSqX13E9B0tjwUALlWFApW8J7pefijSBOGxEfFQJ39Gd4eIEFgD
# Bj9Nc1ddDs30YaCZSMYsqcHU09srlobWmPqadba6hyJW4L1B9bU=
# =d0WA
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Jun 2024 08:45:08 PM PDT
# gpg:                using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602
# gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown]
# gpg:                 aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5017 D831 597C 78A3 D907  EEF7 12E2 204C 0E5D B602

* tag 'pull-ufs-20240630' of https://gitlab.com/jeuk20.kim/qemu:
  hw/ufs: Fix potential bugs in MMIO read|write

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/core/loader: gunzip(): fix memory leak on error path

We should call inflateEnd() like on success path to cleanup state in s
variable.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vl.c: select_machine(): add selected machine type to error message

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vl.c: select_machine(): use g_autoptr

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vl.c: select_machine(): use ERRP_GUARD instead of error propagation

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

docs/system/devices/usb: Replace the non-existing "qemu" binary

We don't ship a binary that is simply called "qemu", so we should
avoid this in the documentation. Use the configurable binary name
via "|qemu_system|" instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

docs/cxl: fix some typos

This patch corrects minor typographical errors to ensure the ASCII art
aligns with the explanations provided.  Specifically, it fixes an
incorrect root port reference and removes redundant words.

Signed-off-by: Hyeongtak Ji <hyeongtak.ji@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

os-posix: Expand setrlimit() syscall compatibility

Darwin uses a subtly different version of the setrlimit() syscall as
described in the COMPATIBILITY section of the macOS man page. The value
of the rlim_cur member has been adjusted accordingly for Darwin-based
systems.

Signed-off-by: Trent Huber <trentmhuber@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

net/can: Remove unused struct 'CanBusState'

As far as I can tell this struct has never been used in this
file (it is used in can_core.c).

Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/arm/bcm2836: Remove unusued struct 'BCM283XClass'

This struct has been unused since
Commit f932093ae165 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")

Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

linux-user: sparc: Remove unused struct 'target_mc_fq'

This struct is unused since Peter's
Commit b8ae597f0e6d ("linux-user/sparc: Fix errors in target_ucontext
structures")

However, hmm, I'm a bit confused since that commit modifies the
structure and then removes it, was that intentional?

Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

linux-user: cris: Remove unused struct 'rt_signal_frame'

Since 'setup_rt_frame' has never been implemented, this struct
is unused.

Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

monitor: Remove obsolete stubs

hmp_info_roms() was removed in commit dd98234c05 ("qapi:
introduce x-query-roms QMP command"),

hmp_info_numa() in commit 1b8ae799d8 ("qapi: introduce
x-query-numa QMP command"),

hmp_info_ramblock() in commit ca411b7c8a ("qapi: introduce
x-query-ramblock QMP command")

and hmp_info_irq() in commit 91f2fa7045 ("qapi: introduce
x-query-irq QMP command").

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target/i386: Advertise MWAIT iff host supports

host_cpu_realizefn() sets CPUID_EXT_MONITOR without consulting host/KVM
capabilities. This may cause problems:

- If MWAIT/MONITOR is not available on the host, advertising this
  feature to the guest and executing MWAIT/MONITOR from the guest
  triggers #UD and the guest doesn't boot.  This is because typically
  #UD takes priority over VM-Exit interception checks and KVM doesn't
  emulate MONITOR/MWAIT on #UD.

- If KVM doesn't support KVM_X86_DISABLE_EXITS_MWAIT, MWAIT/MONITOR
  from the guest are intercepted by KVM, which is not what cpu-pm=on
  intends to do.

In these cases, MWAIT/MONITOR should not be exposed to the guest.

The logic in kvm_arch_get_supported_cpuid() to handle CPUID_EXT_MONITOR
is correct and sufficient, and we can't set CPUID_EXT_MONITOR after
x86_cpu_filter_features().

This was not an issue before commit 662175b91ff ("i386: reorder call to
cpu_exec_realizefn") because the feature added in the accel-specific
realizefn could be checked against host availability and filtered out.

Additionally, it seems not a good idea to handle guest CPUID leaves in
host_cpu_realizefn(), and this patch merges host_cpu_enable_cpu_pm()
into kvm_cpu_realizefn().

Fixes: f5cc5a5c1686 ("i386: split cpu accelerators from cpu.c, using AccelCPUClass")
Fixes: 662175b91ff2 ("i386: reorder call to cpu_exec_realizefn")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vl: Allow multiple -overcommit commands

Both cpu-pm and mem-lock are related to system resource overcommit, but
they are separate from each other, in terms of how they are realized,
and of course, they are applied to different system resources.

It's tempting to use separate command lines to specify their behavior.
e.g., in the following example, the cpu-pm command is quietly
overwritten, and it's not easy to notice it without careful inspection.

  --overcommit mem-lock=on
  --overcommit cpu-pm=on

Fixes: c8c9dc42b7ca ("Remove the deprecated -realtime option")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

cpu: fix memleak of 'halt_cond' and 'thread'

Since a4c2735f35 (cpu: move Qemu[Thread|Cond] setup into common code,
2024-05-30) these fields are now allocated at cpu_common_initfn(). So
let's make sure we also free them at cpu_common_finalize().

Furthermore, the code also frees these on round robin, but we missed
'halt_cond'.

Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hmp-commands-info.hx: Add missing info command for stats subcommand

Signed-off-by: Martin Joerg <martin.joerg@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/ufs: Fix potential bugs in MMIO read|write

This patch fixes two points reported in coverity scan report [1].  Check
the MMIO access address with (addr + size), not just with the start offset
addr to make sure that the requested memory access not to exceed the
actual register region.  We also updated (uint8_t *) to (uint32_t *) to
represent we are accessing the MMIO registers by dword-sized only.

[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/

Cc: Jeuk Kim <jeuk20.kim@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240623024555.78697-1-minwoo.im.dev@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* configure: detect --cpu=mipsisa64r6
* target/i386: decode address before going back to translate.c
* meson: allow configuring the x86-64 baseline
* meson: remove dead optimization option
* exec: small changes to allow compilation with C++ in Android emulator
* fix SEV compilation on 32-bit systems

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZ+8mEUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMVmAf+PjJBpMYNFb2qxJDw5jI7hITsrtm4
# v5TKo9x7E3pna5guae5ODFencYhBITQznHFa3gO9w09QN7Gq/rKjuBBST9VISslU
# dW3HtxY9A1eHQtNqHuD7jBWWo9N0hhNiLRa6xz/VDTjEJSxhjSdK2bRW9Yz9hZAe
# 8bbEEC9us21RdFTS+eijOMo9SPyASUlqIq4RbQpbAVuzzOMeXnfOuX9VSTcBy9o2
# 7cKMg7zjL8WQugJKynyl5lny7m1Ji55LD2UrYMF6Mik3Wz5kwgHcUITJ+ZHd/9hR
# a+MI7o/jyCPdmX9pBvJCxyerCVYBu0ugLqYKpAcsqU6111FLrnGgDvHf/g==
# =LdYd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Jun 2024 10:26:57 AM PDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
  target/i386/sev: Fix printf formats
  target/i386/sev: Use size_t for object sizes
  target/i386: SEV: store pointer to decoded id_auth in SevSnpGuest
  target/i386: SEV: rename sev_snp_guest->id_auth
  target/i386: SEV: store pointer to decoded id_block in SevSnpGuest
  target/i386: SEV: rename sev_snp_guest->id_block
  target/i386: remove unused enum
  target/i386: give CC_OP_POPCNT low bits corresponding to MO_TL
  target/i386: use cpu_cc_dst for CC_OP_POPCNT
  target/i386: fix CC_OP dump
  include: move typeof_strip_qual to compiler.h, use it in QAPI_LIST_LENGTH()
  exec: don't use void* in pointer arithmetic in headers
  exec: avoid using C++ keywords in function parameters
  block: rename former bdrv_file_open callbacks
  block: remove separate bdrv_file_open callback
  block: do not check bdrv_file_open
  block: make assertion more generic
  meson: remove dead optimization option
  meson: allow configuring the x86-64 baseline
  Revert "host/i386: assume presence of SSE2"
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386/sev: Fix printf formats

hwaddr uses HWADDR_PRIx, sizeof yields size_t so uses %zu,
and gsize uses G_GSIZE_FORMAT.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240626194950.1725800-4-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386/sev: Use size_t for object sizes

This code was using both uint32_t and uint64_t for len.
Consistently use size_t instead.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240626194950.1725800-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: SEV: store pointer to decoded id_auth in SevSnpGuest

Do not rely on finish->id_auth_uaddr, so that there are no casts from
pointer to uint64_t.  They break on 32-bit hosts.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: SEV: rename sev_snp_guest->id_auth

Free the "id_auth" name for the binary version of the data.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: SEV: store pointer to decoded id_block in SevSnpGuest

Do not rely on finish->id_block_uaddr, so that there are no casts from
pointer to uint64_t.  They break on 32-bit hosts.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: SEV: rename sev_snp_guest->id_block

Free the "id_block" name for the binary version of the data.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: remove unused enum

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: give CC_OP_POPCNT low bits corresponding to MO_TL

Handle it like the other arithmetic cc_ops.  This simplifies a
bit the implementation of bit test instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: use cpu_cc_dst for CC_OP_POPCNT

It is the only CCOp, among those that compute ZF from one of the cc_op_*
registers, that uses cpu_cc_src.  Do not make it the odd one off,
instead use cpu_cc_dst like the others.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: fix CC_OP dump

POPCNT was missing, and the entries were all out of order after
ADCX/ADOX/ADCOX were moved close to EFLAGS.  Just use designated
initializers.

Fixes: 4885c3c4953 ("target-i386: Use ctpop helper", 2017-01-10)
Fixes: cc155f19717 ("target/i386: rewrite flags writeback for ADCX/ADOX", 2024-06-11)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

include: move typeof_strip_qual to compiler.h, use it in QAPI_LIST_LENGTH()

The typeof_strip_qual() is most useful for the atomic fetch-and-modify
operations in atomic.h, but it can be used elsewhere as well.  For example,
QAPI_LIST_LENGTH() assumes that the argument is not const, which is not a
requirement.

Move the macro to compiler.h and, while at it, move it under #ifndef
__cplusplus to emphasize that it uses C-only constructs.  A C++ version
of typeof_strip_qual() using type traits is possible[1], but beyond the
scope of this patch because the little C++ code that is in QEMU does not
use QAPI.

The patch was tested by changing the declaration of strv_from_str_list()
in qapi/qapi-type-helpers.c to:

    char **strv_from_str_list(const strList *const list)

This is valid C code, and it fails to compile without this change.

[1] https://lore.kernel.org/qemu-devel/20240624205647.112034-1-flwu@google.com/

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Tested-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

exec: don't use void* in pointer arithmetic in headers

void* pointer arithmetic is a GCC extentension which could not be
available in other build tools (e.g. C++). This changes removes this
assumption.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240620201654.598024-1-rkir@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

exec: avoid using C++ keywords in function parameters

to use the QEMU headers with a C++ compiler.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Link: https://lore.kernel.org/r/20240618224553.878869-1-rkir@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

block: rename former bdrv_file_open callbacks

Since there is no bdrv_file_open callback anymore, rename the implementations
so that they end with "_open" instead of "_file_open".  NFS is the exception
because all the functions are named nfs_file_*.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

block: remove separate bdrv_file_open callback

bdrv_file_open and bdrv_open are completely equivalent, they are
never checked except to see which one to invoke.  So merge them
into a single one.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

block: do not check bdrv_file_open

The set of BlockDrivers that have .bdrv_file_open coincides with those
that have .protocol_name and guess what---checking drv->bdrv_file_open
is done to see if the driver is a protocol.  So check drv->protocol_name
instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

block: make assertion more generic

.bdrv_needs_filename is only set for drivers that also set bdrv_file_open,
i.e. protocol drivers.

So we can make the assertion always, it will always pass for those drivers
that use bdrv_open.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: remove dead optimization option

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: allow configuring the x86-64 baseline

Add a Meson option to configure which x86-64 instruction
set to use.  QEMU will now default to x86-64-v1 + cmpxchg16b for
64-bit builds (that corresponds to a Pentium 4 for 32-bit builds).

The baseline can be tuned down to Pentium Pro for 32-bit builds (with
-Dx86_version=0), or up as desired.

Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert "host/i386: assume presence of SSE2"

This reverts commit b18236897ca15c3db1506d8edb9a191dfe51429c.
The x86-64 instruction set can now be tuned down to x86-64 v1
or i386 Pentium Pro.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert "host/i386: assume presence of SSSE3"

This reverts commit 433cd6d94a8256af70a5200f236dc8047c3c1468.
The x86-64 instruction set can now be tuned down to x86-64 v1
or i386 Pentium Pro.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert "host/i386: assume presence of POPCNT"

This reverts commit 45ccdbcb24baf99667997fac5cf60318e5e7db51.
The x86-64 instruction set can now be tuned down to x86-64 v1
or i386 Pentium Pro.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: detect --cpu=mipsisa64r6

Treat it as a MIPS64 machine.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Extend virtual irq csrs masks to be 64 bit wide
* Move Guest irqs out of the core local irqs range
* zvbb implies zvkb
* virt: add address-cells in create_fdt_one_aplic()
* virt: add aplic nodename helper
* virt: rename aplic nodename to 'interrupt-controller'
* virt: aplic DT: add 'qemu, aplic' to 'compatible'
* virt: aplic DT: rename prop to 'riscv, delegation'
* virt: change imsic nodename to 'interrupt-controller'
* virt: imsics DT: add 'qemu, imsics' to 'compatible'
* virt: imsics DT: add '#msi-cells'
* QEMU support for KVM Guest Debug on RISC-V
* Support RISC-V privilege 1.13 spec
* Add support for RISC-V ACPI tests
* Modularize common match conditions for trigger

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmZ9OCEACgkQr3yVEwxT
# gBM6aRAApE7Cjo6U1MrcXywh897DnMV9TT9a0jWxhw659eOSk8Uo8mXNNmGSudcl
# +//jIQr/JB5YVDcnFAGWFDaMMev2hkbXG68IaLsfqA32CWZzrOgFpFP+sgicDKmP
# A+P/z0CL332hDRxlhglbIYukCN1bEjWbUDgZaXPVc7ieMM0mwDyFZt7jH65dNmNg
# HpmVcUSooUx8weHOKp0vCKCBcQ6neahjvweTYszsWjXgu51+VrpoSAAds98HHY9H
# vilbTGtJzGEmnfTCmm1GmRn5/g5iQzDKDge+Kg+OzINEfoOBByJerK27sGNRkzxt
# ZNUd0RM2q1wkfZ3XfLU3qEnxHson8SQp2+VYTqnEv3TdR0AjrnsxL7IUuFm+iTv4
# wG3IqBwt+efdAzc9k+K2smCyp3036HNrJHQSyhtxu+yU36K+jBKVq++pRzgOFTvl
# 87VvNI/dYL4hSJ4yS00ti2axl6GNEAEePHwQ0fRXvEdSGc4vOw3ayDqyqF0Gcy9+
# MJq+nV7BX9pEyTRZEKqTi2nB7xh3kq0e+mev2ByQlracBqHIayXC3DsDvPcUbiwJ
# 8bzX28kl5C28vYUVJjzYQgZy2XXGbbsnv3ifah4hi2NJESmYHN0uxs9raW9i+lhR
# 2FAm+eO6mxuJTIH/NTou+msxZJw2jTPLkYdG2e5UkTjUN7JKGnk=
# =bag2
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Jun 2024 03:00:01 AM PDT
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu: (32 commits)
  target/riscv: Apply modularized matching conditions for icount trigger
  target/riscv: Apply modularized matching conditions for watchpoint
  target/riscv: Add functions for common matching conditions of trigger
  target/riscv: Remove extension auto-update check statements
  target/riscv: Add Zc extension implied rule
  target/riscv: Add multi extension implied rules
  target/riscv: Add MISA extension implied rules
  target/riscv: Introduce extension implied rule helpers
  target/riscv: Introduce extension implied rules definition
  target/riscv: fix instructions count handling in icount mode
  target/riscv: Fix froundnx.h nanbox check
  hw/riscv/virt.c: Make block devices default to virtio
  target/riscv: Support the version for ss1p13
  target/riscv: Reserve exception codes for sw-check and hw-err
  target/riscv: Add MEDELEGH, HEDELEGH csrs for RV32
  target/riscv: Add 'P1P13' bit in SMSTATEEN0
  target/riscv: Define macros and variables for ss1p13
  target/riscv: Reuse the conversion function of priv_spec
  target/riscv/kvm: define TARGET_KVM_HAVE_GUEST_DEBUG
  target/riscv/kvm: handle the exit with debug reason
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Apply modularized matching conditions for icount trigger

We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level. We
can invoke trigger_common_match() to check the privilege levels of the
type 3 triggers.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-4-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Apply modularized matching conditions for watchpoint

We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level.
Remove the related code in riscv_cpu_debug_check_watchpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the watchpoints.

This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.

Only load/store bits and loaded/stored address should be further checked
in riscv_cpu_debug_check_watchpoint().

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-3-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add functions for common matching conditions of trigger

According to RISC-V Debug specification version 0.13 [1] (also applied
to version 1.0 [2] but it has not been ratified yet), there are several
common matching conditions before firing a trigger, including the
enabled privilege levels of the trigger.

This commit adds trigger_common_match() to prepare the common matching
conditions for the type 2/3/6 triggers. For now, we just implement
trigger_priv_match() to check if the enabled privilege levels of the
trigger match CPU's current privilege level.

Remove the related code in riscv_cpu_debug_check_breakpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the breakpoints.

This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.

Only the execution bit and the executed PC should be futher checked in
riscv_cpu_debug_check_breakpoint().

[1]: https://github.com/riscv/riscv-debug-spec/releases/tag/task_group_vote
[2]: https://github.com/riscv/riscv-debug-spec/releases/tag/1.0.0-rc1-asciidoc

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-2-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Remove extension auto-update check statements

Remove the old-fashioned extension auto-update check statements as
they are replaced by the extension implied rules.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-7-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add Zc extension implied rule

Zc extension has special implied rules that need to be handled separately.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-6-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add multi extension implied rules

Add multi extension implied rules to enable the implied extensions of
the multi extension recursively.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add MISA extension implied rules

Add MISA extension implied rules to enable the implied extensions
of MISA recursively.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Introduce extension implied rule helpers

Introduce helpers to enable the extensions based on the implied rules.
The implied extensions are enabled recursively, so we don't have to
expand all of them manually. This also eliminates the old-fashioned
ordering requirement. For example, Zvksg implies Zvks, Zvks implies
Zvksed, etc., removing the need to check the implied rules of Zvksg
before Zvks.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Introduce extension implied rules definition

RISCVCPUImpliedExtsRule is created to store the implied rules.
'is_misa' flag is used to distinguish whether the rule is derived
from the MISA or other extensions.
'ext' stores the MISA bit if 'is_misa' is true. Otherwise, it stores
the offset of the extension defined in RISCVCPUConfig. 'ext' will also
serve as the key of the hash tables to look up the rule in the following
commit.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240625114629.27793-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix instructions count handling in icount mode

When icount is enabled, rather than returning the virtual CPU time, we
should return the instruction count itself. Add an instructions bool
parameter to get_ticks() to correctly return icount_get_raw() when
icount_enabled() == 1 and instruction count is queried. This will modify
the existing behavior which was returning an instructions count close to
the number of cycles (CPI ~= 1).

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240618112649.76683-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Fix froundnx.h nanbox check

helper_froundnx_h function mistakenly uses single percision nanbox
check instead of the half percision one. This patch fixes the issue.

Signed-off-by: Branislav Brzak <brzakbranislav@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240608214546.226963-1-brzakbranislav@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv/virt.c: Make block devices default to virtio

RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.

We also need to set no_cdrom to avoid getting a default cdrom device.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Support the version for ss1p13

Add RISC-V privilege 1.13 support.

Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240606135454.119186-7-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Reserve exception codes for sw-check and hw-err

Based on the priv-1.13.0, add the exception codes for Software-check and
Hardware-error.

Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-6-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add MEDELEGH, HEDELEGH csrs for RV32

Based on privileged spec 1.13, the RV32 needs to implement MEDELEGH
and HEDELEGH for exception codes 32-47 for reserving and exception codes
48-63 for custom use. Add the CSR number though the implementation is
just reading zero and writing ignore. Besides, for accessing HEDELEGH, it
should be controlled by mstateen0 'P1P13' bit.

Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-5-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add 'P1P13' bit in SMSTATEEN0

Based on privilege 1.13 spec, there should be a bit56 for 'P1P13' in
mstateen0 that controls access to the hedeleg.

Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-4-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Define macros and variables for ss1p13

Add macros and variables for RISC-V privilege 1.13 support.

Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-3-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Reuse the conversion function of priv_spec

Public the conversion function of priv_spec in cpu.h, so that tcg-cpu.c
could also use it.

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-2-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>