mc146818rtc: rtc_set_time(): initialize tm to zeroes

set_time() function doesn't set all the fields, so it's better to
initialize tm structure. And Coverity will be happier about it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-4-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

util/filemonitor-inotify: qemu_file_monitor_watch(): assert no overflow

Prefer clear assertions instead of [im]possible array overflow.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-3-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/i386/intel_iommu: vtd_slpte_nonzero_rsvd(): assert no overflow

We support only 3- and 4-level page-tables, which is firstly checked in
vtd_decide_config(), then setup in vtd_init(). Than level fields are
checked by vtd_is_level_supported().

So here we can't have level out from 1..4 inclusive range. Let's assert
it. That also explains Coverity that we are not going to overflow the
array.

CID: 1487158, 1487186
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-2-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qtest/bios-tables-test: Update virt SPCR and DBG2 golden references

Update the virt SPCR and DBG2 golden reference files to have the
fix for the description of the UART.

Diffs from iasl:

@@ -1,57 +1,57 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20200925 (64-bit version)
  * Copyright (c) 2000 - 2020 Intel Corporation
  *
- * Disassembly of tests/data/acpi/virt/SPCR, Fri Nov  3 14:12:06 2023
+ * Disassembly of /tmp/aml-E6YUD2, Fri Nov  3 14:12:06 2023
  *
  * ACPI Data Table [SPCR]
  *
  * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
  */

 [000h 0000   4]                    Signature : "SPCR"    [Serial Port Console Redirection table]
 [004h 0004   4]                 Table Length : 00000050
 [008h 0008   1]                     Revision : 02
-[009h 0009   1]                     Checksum : CB
+[009h 0009   1]                     Checksum : B1
 [00Ah 0010   6]                       Oem ID : "BOCHS "
 [010h 0016   8]                 Oem Table ID : "BXPC    "
 [018h 0024   4]                 Oem Revision : 00000001
 [01Ch 0028   4]              Asl Compiler ID : "BXPC"
 [020h 0032   4]        Asl Compiler Revision : 00000001

 [024h 0036   1]               Interface Type : 03
 [025h 0037   3]                     Reserved : 000000

 [028h 0040  12]         Serial Port Register : [Generic Address Structure]
 [028h 0040   1]                     Space ID : 00 [SystemMemory]
-[029h 0041   1]                    Bit Width : 08
+[029h 0041   1]                    Bit Width : 20
 [02Ah 0042   1]                   Bit Offset : 00
-[02Bh 0043   1]         Encoded Access Width : 01 [Byte Access:8]
+[02Bh 0043   1]         Encoded Access Width : 03 [DWord Access:32]
 [02Ch 0044   8]                      Address : 0000000009000000

 [034h 0052   1]               Interrupt Type : 08
 [035h 0053   1]          PCAT-compatible IRQ : 00
 [036h 0054   4]                    Interrupt : 00000021
 [03Ah 0058   1]                    Baud Rate : 03
 [03Bh 0059   1]                       Parity : 00
 [03Ch 0060   1]                    Stop Bits : 01
 [03Dh 0061   1]                 Flow Control : 02
 [03Eh 0062   1]                Terminal Type : 00
 [04Ch 0076   1]                     Reserved : 00
 [040h 0064   2]                PCI Device ID : FFFF
 [042h 0066   2]                PCI Vendor ID : FFFF
 [044h 0068   1]                      PCI Bus : 00
 [045h 0069   1]                   PCI Device : 00
 [046h 0070   1]                 PCI Function : 00
 [047h 0071   4]                    PCI Flags : 00000000
 [04Bh 0075   1]                  PCI Segment : 00
 [04Ch 0076   4]                     Reserved : 00000000

 Raw Table Data: Length 80 (0x50)

-    0000: 53 50 43 52 50 00 00 00 02 CB 42 4F 43 48 53 20  // SPCRP.....BOCHS
+    0000: 53 50 43 52 50 00 00 00 02 B1 42 4F 43 48 53 20  // SPCRP.....BOCHS
     0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43  // BXPC    ....BXPC
-    0020: 01 00 00 00 03 00 00 00 00 08 00 01 00 00 00 09  // ................
+    0020: 01 00 00 00 03 00 00 00 00 20 00 03 00 00 00 09  // ......... ......
     0030: 00 00 00 00 08 00 21 00 00 00 03 00 01 02 00 00  // ......!.........
     0040: FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00  // ................

@@ -1,57 +1,57 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20200925 (64-bit version)
  * Copyright (c) 2000 - 2020 Intel Corporation
  *
- * Disassembly of tests/data/acpi/virt/DBG2, Fri Nov  3 14:12:06 2023
+ * Disassembly of /tmp/aml-V1YUD2, Fri Nov  3 14:12:06 2023
  *
  * ACPI Data Table [DBG2]
  *
  * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
  */

 [000h 0000   4]                    Signature : "DBG2"    [Debug Port table type 2]
 [004h 0004   4]                 Table Length : 00000057
 [008h 0008   1]                     Revision : 00
-[009h 0009   1]                     Checksum : CF
+[009h 0009   1]                     Checksum : B5
 [00Ah 0010   6]                       Oem ID : "BOCHS "
 [010h 0016   8]                 Oem Table ID : "BXPC    "
 [018h 0024   4]                 Oem Revision : 00000001
 [01Ch 0028   4]              Asl Compiler ID : "BXPC"
 [020h 0032   4]        Asl Compiler Revision : 00000001

 [024h 0036   4]                  Info Offset : 0000002C
 [028h 0040   4]                   Info Count : 00000001

 [02Ch 0044   1]                     Revision : 00
 [02Dh 0045   2]                       Length : 002B
 [02Fh 0047   1]               Register Count : 01
 [030h 0048   2]              Namepath Length : 0005
 [032h 0050   2]              Namepath Offset : 0026
 [034h 0052   2]              OEM Data Length : 0000 [Optional field not present]
 [036h 0054   2]              OEM Data Offset : 0000 [Optional field not present]
 [038h 0056   2]                    Port Type : 8000
 [03Ah 0058   2]                 Port Subtype : 0003
 [03Ch 0060   2]                     Reserved : 0000
 [03Eh 0062   2]          Base Address Offset : 0016
 [040h 0064   2]          Address Size Offset : 0022

 [042h 0066  12]        Base Address Register : [Generic Address Structure]
 [042h 0066   1]                     Space ID : 00 [SystemMemory]
-[043h 0067   1]                    Bit Width : 08
+[043h 0067   1]                    Bit Width : 20
 [044h 0068   1]                   Bit Offset : 00
-[045h 0069   1]         Encoded Access Width : 01 [Byte Access:8]
+[045h 0069   1]         Encoded Access Width : 03 [DWord Access:32]
 [046h 0070   8]                      Address : 0000000009000000

 [04Eh 0078   4]                 Address Size : 00001000

 [052h 0082   5]                     Namepath : "COM0"

 Raw Table Data: Length 87 (0x57)

-    0000: 44 42 47 32 57 00 00 00 00 CF 42 4F 43 48 53 20  // DBG2W.....BOCHS
+    0000: 44 42 47 32 57 00 00 00 00 B5 42 4F 43 48 53 20  // DBG2W.....BOCHS
     0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43  // BXPC    ....BXPC
     0020: 01 00 00 00 2C 00 00 00 01 00 00 00 00 2B 00 01  // ....,........+..
     0030: 05 00 26 00 00 00 00 00 00 80 03 00 00 00 16 00  // ..&.............
-    0040: 22 00 00 08 00 01 00 00 00 09 00 00 00 00 00 10  // "...............
+    0040: 22 00 00 20 00 03 00 00 00 09 00 00 00 00 00 10  // ".. ............
     0050: 00 00 43 4F 4D 30 00                             // ..COM0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: Report correct register sizes in ACPI DBG2/SPCR tables.

Documentation for using the GAS in ACPI tables to report debug UART addresses at
https://learn.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table
states the following:

- The Register Bit Width field contains the register stride and must be a
  power of 2 that is at least as large as the access size.  On 32-bit
  platforms this value cannot exceed 32.  On 64-bit platforms this value
  cannot exceed 64.
- The Access Size field is used to determine whether byte, WORD, DWORD, or
  QWORD accesses are to be used.  QWORD accesses are only valid on 64-bit
  architectures.

Documentation for the ARM PL011 at
https://developer.arm.com/documentation/ddi0183/latest/
states that the registers are:

- spaced 4 bytes apart (see Table 3-2), so register stride must be 32.
- 16 bits in size in some cases (see individual registers), so access
  size must be at least 2.

Linux doesn't seem to care about this error in the table, but it does
affect at least the NOVA microhypervisor.

In theory we therefore have a choice between reporting the access
size as 2 (16 bit accesses) or 3 (32-bit accesses).  In practice,
Linux does not correctly handle the case where the table reports the
access size as 2: as of kernel commit 750b95887e5678, the code in
acpi_parse_spcr() tries to tell the serial driver to use 16 bit
accesses by passing "mmio16" in the option string, but the PL011
driver code in pl011_console_match() only recognizes "mmio" or
"mmio32". The result is that unless the user has enabled 'earlycon'
there is no console output from the guest kernel.

We therefore choose to report the access size as 32 bits; this works
for NOVA and also for Linux.  It is also what the UEFI firmware on a
Raspberry Pi 4 reports, so we're in line with existing real-world
practice.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1938
Signed-off-by: Udo Steinberg <udo@hypervisor.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweaks; use 32 bit accesses]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qtest/bios-tables-test: Allow changes to virt SPCR and DBG2

Allow changes to the virt board SPCR and DBG2 -- we are going to fix
an error in the UART descriptions there.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: fix PMU IRQ registration

Since commit 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
PMU IRQ registration fails for arm64 guests:

[    0.563689] hw perfevents: unable to request IRQ14 for ARM PMU counters
[    0.565160] armv8-pmu: probe of pmu failed with error -22

That commit re-defined VIRTUAL_PMU_IRQ to be a INTID but missed a case
where the PMU IRQ is actually referred by its PPI index. Fix that by using
INTID_TO_PPI() in that case.

Fixes: 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1960
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 475d918d-ab0e-f717-7206-57a5beb28c7b@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-sp-20231105' of https://gitlab.com/rth7680/qemu into staging

target/sparc: Explicitly compute condition codes

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVH9oodHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/M8QgAgPTp/wFLVnSRFLaN
# fBoelVhM4WTWMQ+SUwZMtCvqcMHaBxIMu+hyk5MI11hFOUi9N+vWvRb+NZ6JbK+1
# sqWcx0NdYfNdOeoi1dgzGgcCkFA8u9zW/K7Ih0W8WuU20uiJ4Zw/qmnEELIl/mZR
# 5Ft1mhLMhQSYsH0KSypugLWBxR9SFNH1cV3C1SG2q+6snm/mhKk9NN18zJGFdmmY
# 4CQThx159P/DaPUONZbSAMN94opu6K8FSymELPDUZBYwJRq7fyGKYuDUGRvN1kxx
# I8p/MF1V5Vcth9lvGyBYulFWjo9BDMpkIdmWzXZLOWfzZVAed8PcglxoQqgMbU5u
# eyY/Cw==
# =Tv1h
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 04:09:46 HKT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-sp-20231105' of https://gitlab.com/rth7680/qemu: (21 commits)
  target/sparc: Check for invalid cond in gen_compare_reg
  target/sparc: Implement UDIV inline
  target/sparc: Implement UDIVX and SDIVX inline
  target/sparc: Discard cpu_cond at the end of each insn
  target/sparc: Record entire jump condition in DisasContext
  target/sparc: Merge gen_op_next_insn into only caller
  target/sparc: Pass displacement to advance_jump_cond
  target/sparc: Merge advance_jump_uncond_{never,always} into advance_jump_cond
  target/sparc: Merge gen_branch2 into advance_pc
  target/sparc: Do flush_cond in advance_jump_cond
  target/sparc: Always copy conditions into a new temporary
  target/sparc: Change DisasCompare.c2 to int
  target/sparc: Remove DisasCompare.is_bool
  target/sparc: Remove CC_OP leftovers
  target/sparc: Remove CC_OP_TADDTV, CC_OP_TSUBTV
  target/sparc: Remove CC_OP_SUB, CC_OP_SUBX, CC_OP_TSUB
  target/sparc: Remove CC_OP_ADD, CC_OP_ADDX, CC_OP_TADD
  target/sparc: Remove CC_OP_DIV
  target/sparc: Remove CC_OP_LOGIC
  target/sparc: Split psr and xcc into components
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'migration-20231103-pull-request' of https://gitlab.com/juan.quintela/qemu into staging

Migration Pull request (20231103)

Hi

In this PULL:
- dirty limit fixes (hyman)
- coverity issues (juan)

Please apply.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVE4dgACgkQ9IfvGFhy
# 1yPBgxAAvrsCHwU6/m9y+XGokyHTKKKIVysLip/14jAjDL+viLYgxdVyOGQKQGBa
# +yV+XHTaEyKdihKG4Z5nWuC0yM+sdZQpWXQAcHJLPaPs5wDGICICpdAFY2LbAWSK
# jtX9uq7crywIL4mVKiX+HOjRUPCAYUx/2TcqJf2+0+MKDEVC33ikxNbcx8ZELY+Q
# +hGyOws3mkHSQjyaNUVgnnQtGzikYqcNO2efa+zVPdXYd+TUWW2e9I++Qf48r0Hv
# OqeZAB7bSAb39PNRuj0I1gt4d3WTHzHt7BSpX1OuFqQnzLw8vS5iDQH943WAyGkY
# NblZVb8pyzSg1Jy18H/SmrJDXeufRwqFwD+1NHyxGjsF89KOuVUqGrGpRXhMBtmA
# DSzdgn5jqW5lI1po9FqGdlPTFlhstpMH3DSfPQWurvJh42oM38gmSEHLBNpc4tXo
# 8udMYI09H/kHUoNMTZNGjnZO9LfarGsag6eOJP1bMMublhRlKCaL9RIyV9oOHycE
# IeOeQFeBP/BmYFLWbVPeZej7uiqsEc7VPDJK2QXns210UYanaWmggkmpdAr0I0EV
# pEKHSfVv1qlIlFH4d7MhcJzP2/rY62EC5tYQjT0UaBnCRcDInKrNWa3kbDL0akwr
# 0aJgpbT5ipknVChtwnMWJlbqpeW/VUF5g0jVpYQ3jbe/Zf+OtmU=
# =Pv8z
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Nov 2023 20:04:40 HKT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* tag 'migration-20231103-pull-request' of https://gitlab.com/juan.quintela/qemu:
  migration: Unlock mutex in error case
  docs/migration: Add the dirty limit section
  tests/migration: Introduce dirty-limit into guestperf
  tests/migration: Introduce dirty-ring-size option into guestperf
  tests: Add migration dirty-limit capability test
  system/dirtylimit: Drop the reduplicative check
  system/dirtylimit: Fix a race situation

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'dump-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging

dump queue

Hi

The "dump" queue, with:
- [PATCH v3 qemu 0/3] Allow dump-guest-memory to output standard kdump format
- [PATCH v2 0/5] dump: Minor fixes & improvements

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmVEmsEcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5YNkD/sFnz+I75mn6+DIdC3x
# aSVUU87JxAvWkt+G3KYGS+de2+g2YkRkPwwrIsIceiX7mlL4Es350AVcTl7+fXpu
# Jl9k9I32QI+U3pNXo9BStIqjKUMBxmmKs4aLCh9OHJ6oliTCG+aJTUmSl/dABIuw
# fAcW9vjhyR4ogAp8x7WhR6PKEAAb6OE/9k0w/z0GV2K09N/R0pPAvObQ36VQJ/Cl
# 6DN8tRRytl0IQmC/mZZ+MQPQ5cvamK78X3DmnYCGtyN9HTQERfUFMSSgD/sHLvNi
# rMKuwhXiGQfDs/xQ9Z6Vh2AL7JfAwbIQwUstepb78M/5GBLaZfwFYG4+eCohJE82
# s0GOQ45Yks+AOTGj6lNyOfJ8PIf0SocCTbnLWZicpdHIfoEkSmmL0VZ5w+w0EpDO
# WOZJRpANJGTLhKNb//X3A3OJ05LoavN3/criokhC19DW/yE/VEGd3dXlP6yvFOku
# vGUINGivg1bw7yO0S/rzXNw4+cHCPgBCXbKCNuMI6B+dxL5pUR5Zr4OqcYgwejqE
# RWMdqsHA4ohpzc3AfbuHLFilXJNAgLR3jAEiVUXyrz9U1FiYEiq/8RNuupe9Uveq
# pO1PDZ9fher0Zda4y28bHl/e5M9hVeCFqElcVk0FQGt97T5olVvSaL/hFUPf65ls
# 8A3lN6WaAT9dvM33pkeswZvGxg==
# =eSbp
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Nov 2023 15:01:21 HKT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* tag 'dump-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
  dump: Drop redundant check for empty dump
  dump: Improve some dump-guest-memory error messages
  dump: Recognize "fd:" protocols on Windows hosts
  dump: Fix g_array_unref(NULL) in dump-guest-memory
  dump: Rename qmp_dump_guest_memory() parameter to match QAPI schema
  dump: Add command interface for kdump-raw formats
  dump: Allow directly outputting raw kdump format
  dump: Pass DumpState to write_ functions

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-loongarch-20231103' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20231103

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZUSQIgAKCRBAov/yOSY+
# 31aIBADj5FzdUxyFB813SouAiEiyMdI4bN98AunomAk3Kt8PF1XPoP8kPzcjxcMI
# kCW4eoHb12MVs9OclkqFY3VyaxtSD3YSG/h8W9YxaDyU+L/q89RS+J4r6CAZ8ylg
# J4uxs3Lv8nwPEvRb4zITAt8JQllLey1100j/uu4fU0Rx7vUcMA==
# =9RMx
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Nov 2023 14:16:02 HKT
# gpg:                using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C  6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20231103' of https://gitlab.com/gaosong/qemu:
  linux-user/loongarch64: Add LASX sigcontext save/restore
  linux-user/loongarch64: Add LSX sigcontext save/restore
  linux-user/loongarch64: Use abi_{ulong,uint} types
  linux-user/loongarch64: setup_sigframe() set 'end' context size 0
  linux-user/loongarch64: Fix setup_extcontext alloc wrong fpu_context size
  linux-user/loongarch64: Use traps to track LSX/LASX usage
  target/loongarch: Support 4K page size
  target/loongarch: Implement query-cpu-model-expansion
  target/loongarch: Allow user enable/disable LSX/LASX features
  target/loongarch: Add cpu model 'max'

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

target/sparc: Check for invalid cond in gen_compare_reg

Consolidate the test here; drop the "inverted logic".
Fix MOVr and FMOVR, which were missing the invalid test.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Implement UDIV inline

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Implement UDIVX and SDIVX inline

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Discard cpu_cond at the end of each insn

If the insn raises no exceptions, there will be no path in which
cpu_cond is used, and so the computation may be optimized away.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Record entire jump condition in DisasContext

Use the original condition instead of consuming cpu_cond,
which will now only be live along exception paths.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Merge gen_op_next_insn into only caller

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Pass displacement to advance_jump_cond

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Merge advance_jump_uncond_{never,always} into advance_jump_cond

Handle these via TCG_COND_{ALWAYS,NEVER}.
Allow dc->npc to be variable, using gen_mov_pc_npc.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Merge gen_branch2 into advance_pc

The function had only one caller.  Canonicalize the cpu_cond
test to TCG_COND_NE, the "natural" sense of its value.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Do flush_cond in advance_jump_cond

Do this here instead of in each caller.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Always copy conditions into a new temporary

This will allow the condition to live across changes to
the global cc variables.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Change DisasCompare.c2 to int

We don't require c2 to be variable, so emphasize that.
We don't currently require c2 to be non-zero, but that will change.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Remove DisasCompare.is_bool

Since we're going to feed cpu_cond to another comparison, we don't
reqire a boolean value -- anything non-zero is sufficient.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Remove CC_OP leftovers

All instructions have been converted to generate
full condition codes explicitly.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Remove CC_OP_TADDTV, CC_OP_TSUBTV

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Remove CC_OP_SUB, CC_OP_SUBX, CC_OP_TSUB

These are all related and implementable with common code.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Remove CC_OP_ADD, CC_OP_ADDX, CC_OP_TADD

These are all related and implementable with common code.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Remove CC_OP_DIV

Return both result and overflow from helper_[us]div.
Compute all flags explicitly in gen_op_[us]divcc.

Marginally improve the INT64_MIN special case in helper_sdiv.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Remove CC_OP_LOGIC

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Split psr and xcc into components

Step in removing CC_OP: change the representation of CC_OP_FLAGS.
The 8 bits are distributed between 6 variables, which should make
it easy to keep up to date.

The code within cc_helper.c is quite ugly but is only temporary.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Introduce cpu_put_psr_icc

Isolate linux-user from changes to icc representation.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

migration: Unlock mutex in error case

We were not unlocking bitmap mutex on the error case.  To fix it
forever change to enclose the code with WITH_QEMU_LOCK_GUARD().
Coverity CID 1523750.

Fixes: a2326705e5 ("migration: Stop migration immediately in RDMA error paths")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231103074245.55166-1-quintela@redhat.com>

docs/migration: Add the dirty limit section

The dirty limit feature has been introduced since the 8.1
QEMU release but has not reflected in the document, add a
section for that.

Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <0f2b2c63fec22ea23e4926cdeb567b7a0ebd8152.1698847223.git.yong.huang@smartx.com>

tests/migration: Introduce dirty-limit into guestperf

Currently, guestperf does not cover the dirty-limit
migration, support this feature.

Note that dirty-limit requires 'dirty-ring-size' set.

To enable dirty-limit, setting x-vcpu-dirty-limit-period
as 500ms and x-vcpu-dirty-limit as 10MB/s:
$ ./tests/migration/guestperf.py \
    --dirty-ring-size 4096 \
    --dirty-limit --x-vcpu-dirty-limit-period 500 \
    --vcpu-dirty-limit 10 --output output.json \

To run the entire standardized set of dirty-limit-enabled
comparisons, with unix migration:
$ ./tests/migration/guestperf-batch.py \
    --dirty-ring-size 4096 \
    --dst-host localhost --transport unix \
    --filter compr-dirty-limit* --output outputdir

Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <516e7a55dfc6e33d33510be37eb24223de5dc072.1697815117.git.yong.huang@smartx.com>
Message-ID: <e1283565b00b34b0377bbd27bee4bb8fc7c255a8.1698847223.git.yong.huang@smartx.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

tests/migration: Introduce dirty-ring-size option into guestperf

Dirty ring size configuration is not supported by guestperf tool.

Introduce dirty-ring-size (ranges in [1024, 65536]) option so
developers can play with dirty-ring and dirty-limit feature easier.

To set dirty ring size with 4096 during migration test:
$ ./tests/migration/guestperf.py --dirty-ring-size 4096 xxx

Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <8a388cec5c1f73a34d42515bbc43837e97ee3839.1698847223.git.yong.huang@smartx.com>

tests: Add migration dirty-limit capability test

Add migration dirty-limit capability test if kernel support
dirty ring.

Migration dirty-limit capability introduce dirty limit
capability, two parameters: x-vcpu-dirty-limit-period and
vcpu-dirty-limit are introduced to implement the live
migration with dirty limit.

The test case does the following things:
1. start src, dst vm and enable dirty-limit capability
2. start migrate and set cancel it to check if dirty limit
   stop working.
3. restart dst vm
4. start migrate and enable dirty-limit capability
5. check if migration satisfy the convergence condition
   during pre-switchover phase.

Note that this test case involves many passes, so it runs
in slow mode only.

Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <e55a302df9da7dbc00ad825f47f57c1a756d303e.1698847223.git.yong.huang@smartx.com>

system/dirtylimit: Drop the reduplicative check

Checking if dirty limit is in service is done by the
dirtylimit_query_all function, drop the reduplicative
check in the qmp_query_vcpu_dirty_limit function.

Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <df9c3514933ff6750ef88068af18d3054bedf746.1698847223.git.yong.huang@smartx.com>

system/dirtylimit: Fix a race situation

Fix a race situation for global variable dirtylimit_state.

Also, replace usleep by g_usleep to increase platform
accessibility to the sleep function.

Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <27c86239e21eda03d11ce5a3d07da3c229f562e3.1698847223.git.yong.huang@smartx.com>

linux-user/loongarch64: Add LASX sigcontext save/restore

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-7-gaosong@loongson.cn>

linux-user/loongarch64: Add LSX sigcontext save/restore

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-6-gaosong@loongson.cn>

linux-user/loongarch64: Use abi_{ulong,uint} types

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-5-gaosong@loongson.cn>

linux-user/loongarch64: setup_sigframe() set 'end' context size 0

See:
  https://github.com/torvalds/linux/blob/master/arch/loongarch/kernel/signal.c

The kernel setup_sigcontext() set end context size 0.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-4-gaosong@loongson.cn>

linux-user/loongarch64: Fix setup_extcontext alloc wrong fpu_context size

See:
 https://github.com/torvalds/linux/blob/master/arch/loongarch/kernel/signal.c

The alloc size is sizeof(struct target_fpu_context).

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-3-gaosong@loongson.cn>

linux-user/loongarch64: Use traps to track LSX/LASX usage

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-2-gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

target/loongarch: Support 4K page size

The LoongArch kernel supports 4K page size.
Change TARGET_PAGE_BITS to 12.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231023024059.3858349-1-gaosong@loongson.cn>

target/loongarch: Implement query-cpu-model-expansion

Add support for the query-cpu-model-expansion QMP command to LoongArch.
We support query the cpu features.

  e.g
    la464 and max cpu support LSX/LASX, default enable,
    la132 not support LSX/LASX.

    1. start with '-cpu max,lasx=off'

    (QEMU) query-cpu-model-expansion type=static  model={"name":"max"}
    {"return": {"model": {"name": "max", "props": {"lasx": false, "lsx": true}}}}

    2. start with '-cpu la464,lasx=off'
    (QEMU) query-cpu-model-expansion type=static  model={"name":"la464"}
    {"return": {"model": {"name": "max", "props": {"lasx": false, "lsx": true}}}

    3. start with '-cpu la132,lasx=off'
    qemu-system-loongarch64: can't apply global la132-loongarch-cpu.lasx=off: Property 'la132-loongarch-cpu.lasx' not found

    4. start with '-cpu max,lasx=off' or start with '-cpu la464,lasx=off' query cpu model la132
    (QEMU) query-cpu-model-expansion type=static  model={"name":"la132"}
    {"return": {"model": {"name": "la132"}}}

Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231020084925.3457084-4-gaosong@loongson.cn>

target/loongarch: Allow user enable/disable LSX/LASX features

Some users may not need LSX/LASX, this patch allows the user
enable/disable LSX/LASX features.

 e.g
 '-cpu max,lsx=on,lasx=on'   (default);
 '-cpu max,lsx=on,lasx=off'  (enabled LSX);
 '-cpu max,lsx=off,lasx=on'  (enabled LASX, LSX);
 '-cpu max,lsx=off'          (disable LSX and LASX).

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231020084925.3457084-3-gaosong@loongson.cn>

target/loongarch: Add cpu model 'max'

We use cpu la464 for the 'max' cpu.

Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231020084925.3457084-2-gaosong@loongson.cn>

Merge tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * linux-user/elfload: Add missing arm64 hwcap values
 * stellaris-gamepad: Convert to qdev
 * docs/specs: Convert various txt docs to rST
 * MAINTAINERS: Make sure that gicv3_internal.h is covered, too
 * hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
 * hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
 * hw/misc/imx7_snvs: Trace MMIO access
 * hw/misc/imx6_ccm: Convert DPRINTF to trace events
 * hw/i2c/pm_smbus: Convert DPRINTF to trace events
 * target/arm: Enable FEAT_MOPS insns in user-mode emulation
 * linux-user: Report AArch64 hwcap2 fields above bit 31
 * target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
 * target/arm: Fix SVE STR increment
 * hw/char/stm32f2xx_usart: implement TX interrupts
 * target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
 * xlnx-versal-virt: Add AMD/Xilinx TRNG device

* tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
  tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
  hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device
  hw/misc: Introduce AMD/Xilix Versal TRNG device
  target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
  hw/char/stm32f2xx_usart: Add more definitions for CR1 register
  hw/char/stm32f2xx_usart: Update IRQ when DR is written
  hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
  target/arm: Fix SVE STR increment
  target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
  linux-user: Report AArch64 hwcap2 fields above bit 31
  target/arm: Enable FEAT_MOPS insns in user-mode emulation
  hw/i2c/pm_smbus: Convert DPRINTF to trace events
  hw/misc/imx6_ccm: Convert DPRINTF to trace events
  hw/misc/imx7_snvs: Trace MMIO access
  hw/watchdog/wdt_imx2: Trace timer activity
  hw/watchdog/wdt_imx2: Trace MMIO access
  hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
  MAINTAINERS: Make sure that gicv3_internal.h is covered, too
  docs/specs/vmgenid: Convert to rST
  docs/specs/vmcoreinfo: Convert to rST
  ...

Conflicts:
  hw/input/stellaris_input.c
  The qdev conversion in this pull request ("stellaris-gamepad: Convert
  to qdev") eliminates the vmstate_register() call that was converted to
  vmstate_register_any() in the conflicting migration pull request.
  vmstate_register_any() is no longer necessary now that this device has
  been converted to qdev, so take this pull request's version of
  stellaris_gamepad.c over the previous pull request's
  stellaris_input.c (the file was renamed).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu into staging

Migration Pull request (20231102)

Hi

In this pull request:

- migration reboot mode (steve)
  * I disabled the test because our CI don't like programs using so
    much shared memory.  Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
  thomas find better solutions for s390x and ipmi.
  now also works on s390x

Please, apply.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVDipMACgkQ9IfvGFhy
# 1yNYnQ/9E5Cywsoqljqa/9FiKBSII2qMrmkfu6JLKqePnsh5pFZiukbudYRuJCCe
# ZTDEmD0NmKRJbDx2xRU1qx/e6gKJy+gz37KP89Buuh/WwZHPboPYtxQpGvCSiH26
# J3i+1+TgaqmkLzcO35wa8tp6gneQclWeAwKgMvdb4cm2pJEhgWRKI62ccyLzxeve
# UCzFQn60t55ETyVZGnRD4YwdTQvGKH+DPlyTuJOLR3DePuvZd8EdH+ypvB4RLAy7
# 3+CuQOxmF5LRXPbpJuAeOsudbmhhHzrO/yL7ZmsiKQTthsJv+SzC1bO94jhQrawZ
# Q7GCii5KpGq0KnRTRKZRGk6XKwxcYRduXMX3R5tXuVmDmCZsjhXzziU8yEdftph8
# 5TJdk1o0Gb043EFu81mrsQYS+9yJqe6sy6m3PTJaec54cAty5ln+c17WOvpAOaSV
# +1phe05ftuVPmQ3KWhbIR/tCmavNLwEZxpVIfyaKJx04bFbtQ9gRpRyURORX4KXc
# s4WXvNirQEohxYBnP4TPvA09xBTW3V08pk/wRDwt0YDXnLiqCltOuxD8r05K8K4B
# MkCLcWj0g7he2tBkF60oz1KSIE0oTB81um9AzLIv5F2YSYLaJM5BIcoC437MR2f4
# MOR7drR1fP5GsRu/SeU5BWvhVq3IvdOxR7G2MLNRJJvl7ZtGXDc=
# =uaqL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Nov 2023 19:40:03 HKT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu: (40 commits)
  migration: modify test_multifd_tcp_none() to use new QAPI syntax.
  migration: Implement MigrateChannelList to hmp migration flow.
  migration: Implement MigrateChannelList to qmp migration flow.
  migration: modify migration_channels_and_uri_compatible() for new QAPI syntax
  migration: New migrate and migrate-incoming argument 'channels'
  migration: Convert the file backend to the new QAPI syntax
  migration: convert exec backend to accept MigrateAddress.
  migration: convert rdma backend to accept MigrateAddress
  migration: convert socket backend to accept MigrateAddress
  migration: convert migration 'uri' into 'MigrateAddress'
  migration: New QAPI type 'MigrateAddress'
  migration: Change ram_dirty_bitmap_reload() retval to bool
  tests/migration-test: Add a test for postcopy hangs during RECOVER
  migration: Allow network to fail even during recovery
  migration: Refactor error handling in source return path
  tests/qtest: migration: add reboot mode test
  cpr: reboot mode
  cpr: relax vhost migration blockers
  cpr: relax blockdev migration blockers
  migration: per-mode blockers
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device

Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id: 20231031184611.3029156-4-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device

Connect the support for Versal True Random Number Generator
(TRNG) device.

Warning: unlike the TRNG component in a real device from the
Versal device familiy, the connected TRNG model is not of
cryptographic grade and is not intended for use cases when
cryptograpically strong TRNG is needed.

Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20231031184611.3029156-3-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Introduce AMD/Xilix Versal TRNG device

This adds a non-cryptographic grade implementation of the
model for the True Random Number Generator (TRNG) component
in AMD/Xilinx Versal device family.

This implements all 3 modes defined by the actual hardware
specs, all of which selectable by guest software at will
at anytime:
1) PRNG mode, in which the generated sequence is required to
   be reproducible after reseeded by the same 384-bit value
   as supplied by guest software.
2) Test mode, in which the generated sequence is required to
   be reproducible ater reseeded by the same 128-bit test
   seed supplied by guest software.
3) TRNG mode, in which non-reproducible sequence is generated
   based on periodic reseed by a suitable entropy source.

This model is only intended for non-real world testing of
guest software, where cryptographically strong PRNG or TRNG
is not needed.

This model supports versions 1 & 2 of the device, with
default to be version 2; the 'hw-version' uint32 property
can be set to 0x0100 to override the default.

Other implemented properties:
- 'forced-prng', uint64
  When set to non-zero, mode 3's entropy source is implemented
  as a deterministic sequence based on the given value and other
  deterministic parameters.
  This option allows the emulation to test guest software using
  mode 3 and to reproduce data-dependent defects.

- 'fips-fault-events', uint32, bit-mask
  bit 3: Triggers the SP800-90B entropy health test fault irq
  bit 1: Triggers the FIPS 140-2 continuous test fault irq

Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id: 20231031184611.3029156-2-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dump: Drop redundant check for empty dump

dump_init() first computes the size of the dump, taking the filter
area into account, and fails if its zero.  It then looks for memory in
the filter area, and fails if there is none.

This is redundant: if the size of the dump is zero, there is no
memory, and vice versa.  Delete this check.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231031104531.3169721-6-armbru@redhat.com>

dump: Improve some dump-guest-memory error messages

Zero @length is rejected with "Invalid parameter 'length'".  Improve
to "parameter 'length' expects a non-zero length".

qemu_open_old() is a wrapper around qemu_open_internal() that throws
away error information.  Switch to the wrapper that doesn't:
qemu_create().  Example improvement:

    (qemu) dump-guest-memory /dev/fdset/x 0 1
    Error: Could not open '/dev/fdset/x': Invalid argument

becomes

    Error: Could not parse fdset /dev/fdset/x

@protocol values not starting with "fd:" or "file:" are rejected with
"Invalid parameter 'protocol'".  Improve to "parameter 'protocol' must
start with 'file:' or 'fd:'".

While there, make the conditional checking @protocol a little more
obvious.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231031104531.3169721-5-armbru@redhat.com>

dump: Recognize "fd:" protocols on Windows hosts

A few QMP command can work with named file descriptors.

The only way to create a named file descriptor used to be QMP command
getfd, which only works on POSIX hosts.  Thus, named file descriptors
were actually usable only there.

They became usable on Windows hosts when we added QMP command
get-win32-socket (commit 4cda177c601 "qmp: add 'get-win32-socket'").

Except in dump-guest-memory, because qmp_dump_guest_memory() compiles
its named file descriptor code only #if !defined(WIN32).

Compile it unconditionally, like we do for the other commands
supporting them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231031104531.3169721-4-armbru@redhat.com>

dump: Fix g_array_unref(NULL) in dump-guest-memory

When dump_init()'s check for non-zero @length fails, dump_cleanup()
passes null s->string_table_buf to g_array_unref(), which spews "GLib:
g_array_unref: assertion 'array' failed" to stderr.

Guard the g_array_unref().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231031104531.3169721-3-armbru@redhat.com>

dump: Rename qmp_dump_guest_memory() parameter to match QAPI schema

The name of the second parameter differs between QAPI schema and C
implementation: it's @protocol in the former and @file in the latter.
Potentially confusing.  Change the C implementation to match the QAPI
schema.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231031104531.3169721-2-armbru@redhat.com>

dump: Add command interface for kdump-raw formats

The QMP dump API represents the dump format as an enumeration. Add three
new enumerators, one for each supported kdump compression, each named
"kdump-raw-*".

For the HMP command line, rather than adding a new flag corresponding to
each format, it seems more human-friendly to add a single flag "-R" to
switch the kdump formats to "raw" mode. The choice of "-R" also
correlates nicely to the "makedumpfile -R" option, which would serve to
reassemble a flattened vmcore.

Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ Marc-André: replace loff_t with off_t, indent fixes ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230918233233.1431858-4-stephen.s.brennan@oracle.com>

dump: Allow directly outputting raw kdump format

The flattened format (currently output by QEMU) is used by makedumpfile
only when it is outputting a vmcore to a file which is not seekable. The
flattened format functions essentially as a set of instructions of the
form "seek to the given offset, then write the given bytes out".

The flattened format can be reconstructed using makedumpfile -R, or
makedumpfile-R.pl, but it is a slow process because it requires copying
the entire vmcore. The flattened format can also be directly read by
crash, but still, it requires a lengthy reassembly phase.

To sum up, the flattened format is not an ideal one: it should only be
used on files which are actually not seekable. This is the exact
strategy which makedumpfile uses, as seen in the implementation of
"write_buffer()" in makedumpfile [1]. However, QEMU has always used the
flattened format. For compatibility it is best not to change the default
output format without warning. So, add a flag to DumpState which changes
the output to use the normal (i.e. raw) format. This flag will be added
to the QMP and HMP commands in the next change.

[1]: https://github.com/makedumpfile/makedumpfile/blob/f23bb943568188a2746dbf9b6692668f5a2ac3b6/makedumpfile.c#L5008-L5040

Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ Marc-André: replace loff_t with off_t ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230918233233.1431858-3-stephen.s.brennan@oracle.com>

dump: Pass DumpState to write_ functions

For the next patch, we need a reference to DumpState when writing data.

Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230918233233.1431858-2-stephen.s.brennan@oracle.com>

target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk

In a two-stage translation, the result of the BTI guarded bit should
be the guarded bit from the first stage of translation, as there is
no BTI guard information in stage two.  Our code tried to do this,
but got it wrong, because we currently have two fields where the GP
bit information might live (ARMCacheAttrs::guarded and
CPUTLBEntryFull::extra::arm::guarded), and we were storing the GP bit
in the latter during the stage 1 walk but trying to copy the former
in combine_cacheattrs().

Remove the duplicated storage, and always use the field in
CPUTLBEntryFull; correctly propagate the stage 1 value to the output
in get_phys_addr_twostage().

Note for stable backports: in v8.0 and earlier the field is named
result->f.guarded, not result->f.extra.arm.guarded.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1950
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231031173723.26582-1-peter.maydell@linaro.org

hw/char/stm32f2xx_usart: Add more definitions for CR1 register

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 20231030151528.1138131-4-hans-erik.floryd@rt-labs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/char/stm32f2xx_usart: Update IRQ when DR is written

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 20231030151528.1138131-3-hans-erik.floryd@rt-labs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 20231030151528.1138131-2-hans-erik.floryd@rt-labs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix SVE STR increment

The previous change missed updating one of the increments and
one of the MemOps.  Add a test case for all vector lengths.

Cc: qemu-stable@nongnu.org
Fixes: e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231031143215.29764-1-richard.henderson@linaro.org
[PMM: fixed checkpatch nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly

Most of the registers used by the FEAT_MOPS instructions cannot use
31 as a register field value; this is CONSTRAINED UNPREDICTABLE to
NOP or UNDEF (we UNDEF).  However, it is permitted for the "source
value" register for the memset insns SET* to be 31, which (as usual
for most data-processing insns) means it should be the zero register
XZR. We forgot to handle this case, with the effect that trying to
set memory to zero with a "SET* Xd, Xn, XZR" sets the memory to
the value that happens to be in the low byte of SP.

Handle XZR when getting the SET* data value from the register file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030174000.3792225-4-peter.maydell@linaro.org

linux-user: Report AArch64 hwcap2 fields above bit 31

The AArch64 ELF hwcap2 field is 64 bits, but our get_elf_hwcap2()
works with uint32_t, so it accidentally fails to report any hwcaps
over bit 31.  Use uint64_t here.

The Arm hwcap2 is only 32 bits (because the ELF format makes these
fields be the size of "long" in the ABI), but since it shares the
prototype declaration for get_elf_hwcap2() it is easier to also
expand it to 64 bits.

The only hwcap fields we implement already that are affected by this
are the HBC and MOPS ones, neither of which were implemented in a
previous release, so this doesn't need backporting to older stable
branches.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030174000.3792225-3-peter.maydell@linaro.org

target/arm: Enable FEAT_MOPS insns in user-mode emulation

In user-mode emulation, we need to set the SCTLR_EL1.MSCEn
bit to avoid all the FEAT_MOPS insns UNDEFing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231030174000.3792225-2-peter.maydell@linaro.org

hw/i2c/pm_smbus: Convert DPRINTF to trace events

Let the trace messages slightly deviate from the function names
("smb" -> "smbus") being traced in order to avoid conflights with the SMB
protocol.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20231028122415.14869-6-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/imx6_ccm: Convert DPRINTF to trace events

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-5-shentey@gmail.com
[PMM: Add "Hz" unit indicator to frequency traces]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/imx7_snvs: Trace MMIO access

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-4-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/watchdog/wdt_imx2: Trace timer activity

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20231028122415.14869-3-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/watchdog/wdt_imx2: Trace MMIO access

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/pxa2xx_gpio: Pass CPU using QOM link property

Instead of passing the CPU index and resolving it,
use a QOM link to directly pass the CPU.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030083706.63685-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Make sure that gicv3_internal.h is covered, too

gic_internal.h is already covered by the "ARM cores" section.
Let's adapt the entry with a wildcard to cover gicv3_internal.h, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231027060709.242388-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/specs/vmgenid: Convert to rST

Convert docs/specs/vmgenid.txt to rST format.

Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-9-peter.maydell@linaro.org

docs/specs/vmcoreinfo: Convert to rST

Convert docs/specs/vmcoreinfo.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-8-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>

docs/specs/virt-ctlr: Convert to rST

Convert docs/specs/virt-ctlr.txt to rST format.

I added the name of the device to give readers a bit more idea
of which device we're actually documenting here.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

docs/specs/standard-vga: Convert to rST

Convert docs/specs/standard-vga.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-6-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

docs/specs/pvpanic: Convert to rST

Convert docs/specs/pvpanic.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

docs/specs/ivshmem-spec: Convert to rST

Convert docs/specs/ivshmem-spec.txt to rST format.

In converting, I have dropped the sections on the device's command
line interface and usage, as they are already covered by the
user-facing docs in system/devices/ivshmem.rst.

I have also removed the reference to Memnic, because the URL is dead
and a web search suggests that whatever this was it's pretty much
sunk without trace.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-4-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

docs/specs/edu: Convert to rST

Convert docs/specs/edu.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-3-peter.maydell@linaro.org

docs/specs/vmw_pvscsi-spec: Convert to rST

Convert the docs/specs/vmw_pvscsi-spec.txt file to rST format.
This conversion includes some minor wordsmithing of the text
to fix some grammar nits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-2-peter.maydell@linaro.org

hw/input/stellaris_gamepad: Convert to qemu_input_handler_register()

Now that we have converted to qdev, we can use the newer
qemu_input_handler_register() API rather than the legacy
qemu_add_kbd_event_handler().

Since we only have one user, take the opportunity to convert
from scancodes to QCodes, rather than using
qemu_input_key_value_to_scancode() (which adds an 0xe0
prefix and encodes up/down indication in the scancode,
which our old handler function then had to reverse). That
lets us drop the old state field which was tracking whether
we were halfway through a two-byte scancode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-7-peter.maydell@linaro.org

hw/input/stellaris_input: Convert to qdev

Convert the hw/input/stellaris_input device to qdev.

The interface uses an array property for the board to specify the
keycodes to use, so the s->keycodes memory is now allocated by the
array-property machinery.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-6-peter.maydell@linaro.org

hw/input/stellaris_gamepad: Remove StellarisGamepadButton struct

Currently for each button on the device we have a
StellarisGamepadButton struct which has the irq, keycode and pressed
state for it.  When we convert to qdev, the qdev property and GPIO
APIs are going to require that we have separate arrays for the irqs
and keycodes.  Convert from array-of-structs to three separate arrays
in preparation.

This is a migration compatibility break for the stellaris boards
(lm3s6965evb, lm3s811evb).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-5-peter.maydell@linaro.org
--
v1=>v2: mention migration compat break in commit message;
  bump version fields in vmstate

qdev: Add qdev_prop_set_array()

Instead of exposing the ugly hack of how we represent arrays in qdev (a
static "foo-len" property and after it is set, dynamically created
"foo[i]" properties) to boards, add an interface that allows setting the
whole array at once.

Once all internal users of devices with array properties have been
converted to use this function, we can change the implementation to move
away from this hack.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-4-peter.maydell@linaro.org

hw/input/stellaris_gamepad: Rename structs to our usual convention

Rename the structs in stellaris_gamepad.c to our now-standard
CamelCase convention.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-3-peter.maydell@linaro.org

hw/input/stellaris_input: Rename to stellaris_gamepad

This source file implements a stellaris gamepad device; rename
it so that it is a closer match to the device name.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-2-peter.maydell@linaro.org

linux-user/elfload: Add missing arm64 hwcap values

Specifically DIT, LSE2, and MTE3.

We already expose detection of these via the CPUID interface, but
missed these from ELF hwcaps.

Signed-off-by: Marielle Novastrider <marielle@novastrider.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231029210058.38986-1-marielle@novastrider.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed conflict with feature tests moving to cpu-features.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: modify test_multifd_tcp_none() to use new QAPI syntax.

modify multifd tcp common test to incorporate the new QAPI
syntax defined.

Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-15-farosas@suse.de>

migration: Implement MigrateChannelList to hmp migration flow.

Integrate MigrateChannelList with all transport backends
(socket, exec and rdma) for both src and dest migration
endpoints for hmp migration.

Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231023182053.8711-14-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Implement MigrateChannelList to qmp migration flow.

Integrate MigrateChannelList with all transport backends
(socket, exec and rdma) for both src and dest migration
endpoints for qmp migration.

For current series, limit the size of MigrateChannelList
to single element (single interface) as runtime check.

Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-13-farosas@suse.de>

migration: modify migration_channels_and_uri_compatible() for new QAPI syntax

migration_channels_and_uri_compatible() check for transport mechanism
suitable for multifd migration gets executed when the caller calls old
uri syntax. It needs it to be run when using the modern MigrateChannel
QAPI syntax too.

After URI -> 'MigrateChannel' :
migration_channels_and_uri_compatible() ->
migration_channels_and_transport_compatible() passes object as argument
and check for valid transport mechanism.

Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-12-farosas@suse.de>

migration: New migrate and migrate-incoming argument 'channels'

MigrateChannelList allows to connect accross multiple interfaces.
Add MigrateChannelList struct as argument to migration QAPIs.

We plan to include multiple channels in future, to connnect
multiple interfaces. Hence, we choose 'MigrateChannelList'
as the new argument over 'MigrateChannel' to make migration
QAPIs future proof.

Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-10-farosas@suse.de>

migration: Convert the file backend to the new QAPI syntax

Convert the file: URI to accept a FileMigrationArgs to be compatible
with the new migration QAPI.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-9-farosas@suse.de>

migration: convert exec backend to accept MigrateAddress.

Exec transport backend for 'migrate'/'migrate-incoming' QAPIs accept
new wire protocol of MigrateAddress struct.

It is achived by parsing 'uri' string and storing migration parameters
required for exec connection into strList struct.

Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-8-farosas@suse.de>

migration: convert rdma backend to accept MigrateAddress

RDMA based transport backend for 'migrate'/'migrate-incoming' QAPIs
accept new wire protocol of MigrateAddress struct.

It is achived by parsing 'uri' string and storing migration parameters
required for RDMA connection into well defined InetSocketAddress struct.

Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-7-farosas@suse.de>