amdkfd: use calloc instead of kzalloc to avoid integer overflow

This uses calloc instead of doing the multiplication which might
overflow.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-msm-next-2024-04-11' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Fixes for v6.9

Display:
- Fixes for PM refcount leak when DP goes to disconnected state and
  also when link training fails. This is also one of the issues found
  with the pm runtime series
- Add missing newlines to prints in msm_fb and msm_kms
- Change permissions of some dpu debugfs entries which write to const
  data from catalog to read-only to avoid protection faults
- Fix the interface table for the catalog of X1E80100. This is an
  important fix to bringup DP for X1E80100.
- Logging fix to print the callback symbol in the invalid IRQ message
  case rather than printing when its known to be NULL.
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change

GPU:
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvFwRUcHGWva7oDeydq1PTiZMduuykCD2MWaFrT4iMGZA@mail.gmail.com

Merge tag 'drm-xe-fixes-2024-04-11' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes

- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ewvvtgcb2gonxvccws6nt6fqswoyfp4g43t5ex24vpqwtrxdzm@hgjoz5uirmxx

Merge tag 'drm-misc-fixes-2024-04-11' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

ast:
- Fix soft lockup

client:
- Protect connector modes with mode_config mutex

host1x:
- Do not setup DMA for virtual addresses

ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling

nouveau:
- gsp: Fix OOB access
- Fix casting

panfrost:
- Fix error path in MMU code

qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"

vmwgfx:
- Enable DMA for SEV mappings

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411073403.GA9895@localhost.localdomain

drm/xe: Label RING_CONTEXT_CONTROL as masked

RING_CONTEXT_CONTROL is a masked register.

v2: Also clean up setting register value (Lucas)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404161256.3852502-1-ashutosh.dixit@intel.com
(cherry picked from commit dc30c6e7149baaae4288c742de95212b31f07438)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/xe_migrate: Cast to output precision before multiplying operands

Addressing potential overflow in result of  multiplication of two lower
precision (u32) operands before widening it to higher precision
(u64).

-v2
Fix commit message and description. (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401175300.3823653-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 34820967ae7b45411f8f4f737c2d63b0c608e0d7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/hwmon: Cast result to output precision on left shift of operand

Address potential overflow in result of left shift of a
lower precision (u32) operand before assignment to higher
precision (u64) variable.

v2:
 - Update commit message. (Himal)

Fixes: 4446fcf220ce ("drm/xe/hwmon: Expose power1_max_interval")
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-5-karthik.poosa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 883232b47b81108b0252197c747f396ecd51455a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/xe/display: Fix double mutex initialization

All of these mutexes are already initialized by the display side since
commit 3fef3e6ff86a ("drm/i915: move display mutex inits to display
code"), so the xe shouldn´t initialize them.

Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405200711.2041428-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 117de185edf2c5767f03575219bf7a43b161ff0d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge tag 'amd-drm-fixes-6.9-2024-04-10' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.9-2024-04-10:

amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix

amdkfd:
- GPU reset fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411013425.6431-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2024-04-10' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes

Display fixes:
- Couple CDCLK programming fixes (Ville)
- HDCP related fix (Suraj)
- 4 Bigjoiner related fixes (Ville)

Core fix:
- Fix for a circular locking around GuC on reset+wedged case (John)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZhcJxlzc6zLMC1c-@intel.com

drm/amdgpu: differentiate external rev id for gfx 11.5.0

This patch to differentiate external rev id for gfx 11.5.0.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Adjust dprefclk by down spread percentage.

[Why]
OLED panels show no display for large vtotal timings.

[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.

Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST

The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.

Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4

In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.

Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix disable otg wa logic in DCN316

[Why]
Wrong logic cause screen corruption.

[How]
Port logic from DCN35/314.

Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not recursively call manual trigger programming

[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.

Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: always reset ODM mode in context when adding first plane

[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.

Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix incorrect number of active RBs for gfx11

The RB bitmap should be global active RB bitmap &
active RB bitmap based on active SA.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Return max resolution supported by DWB

mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.

Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdkfd: sync all devices to wait all processes being evicted

If there are more than one device doing reset in parallel, the first
device will call kfd_suspend_all_processes() to evict all processes
on all devices, this call takes time to finish. other device will
start reset and recover without waiting. if the process has not been
evicted before doing recover, it will be restored, then caused page
fault.

Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clear set_q_mode_offs when VM changed

[Why]
set_q_mode_offs don't get cleared after GPU reset, nexting SET_Q_MODE
packet to init shadow memory will be skiped, hence there has a page fault.

[How]
VM flush is needed after GPU reset, clear set_q_mode_offs when
emitting VM flush.

Fixes: 8bc75586ea01 ("drm/amdgpu: workaround to avoid SET_Q_MODE packets v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: Fix VCN allocation in CPX partition

VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In
certain configs, VCN instance can be exclusively allocated to a
partition even under CPX mode.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix the high voltage issue after unload

fix the high voltage issue after unload on smu 13.0.10

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Skip on writeback when it's not applicable

[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.

[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2

SDMA_CNTL is not set in some cases, driver configures it by itself.

v2: simplify code

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add smu 14.0.1 discovery support

This patch to add smu 14.0.1 support

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: Update smu v14.0.0 headers to be 14.0.1 compatible

update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu : Increase the mes log buffer size as per new MES FW version

From MES version 0x54, the log entry increased and require the log buffer
size to be increased. The 16k is maximum size agreed

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu : Add mes_log_enable to control mes log feature

The MES log might slow down the performance for extra step of log the data,
disable it by default and introduce a parameter can enable it when necessary

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11

While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.

Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add DCN 351 version for microcode load

There is a new DCN veriosn 3.5.1 need to load

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Reset dGPU if suspend got aborted

For SOC21 ASICs, there is an issue in re-enabling PM features if a
suspend got aborted. In such cases, reset the device during resume
phase. This is a workaround till a proper solution is finalized.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu/umsch: reinitialize write pointer in hw init

Otherwise the old one will be used during GPU reset.
That's not expected.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: Refine IB schedule error logging

Downgrade to debug information when IBs are skipped. Also, use dev_* to
identify the device.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always force full reset for SOC21

There are cases where soft reset seems to succeed, but
does not, so always use mode1/2 for now.

Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdkfd: Reset GPU on queue preemption failure

Currently, with F32 HWS GPU reset is only when unmap queue fails.

However, if compute queue doesn't repond to preemption request in time
unmap will return without any error. In this case, only preemption error
is logged and Reset is not triggered. Call GPU reset in this case also.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/vmwgfx: Enable DMA mappings with SEV

Enable DMA mappings in vmwgfx after TTM has been fixed in commit
3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")

This enables full guest-backed memory support and in particular allows
usage of screen targets as the presentation mechanism.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reported-by: Ye Li <ye.li@broadcom.com>
Tested-by: Ye Li <ye.li@broadcom.com>
Fixes: 3b0d6458c705 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408022802.358641-1-zack.rusin@broadcom.com

nouveau: fix devinit paths to only handle display on GSP.

This reverts:
nouveau/gsp: don't check devinit disable on GSP.
and applies a further fix.

It turns out the open gpu driver, checks this register,
but only for display.

Match that behaviour and in the turing path only disable
the display block. (ampere already only does displays).

Fixes: 5d4e8ae6e57b ("nouveau/gsp: don't check devinit disable on GSP.")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408064243.2219527-1-airlied@gmail.com

drm/i915/vrr: Disable VRR when using bigjoiner

All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change switch between non-VRR and VRR timings
generators on the fly, or even when sending the push to the
transcoder. For now just disable VRR when bigjoiner is needed.

Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-6-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit f9d5e51db65652dbd8a2102fd7619440e3599fd2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Disable live M/N updates when using bigjoiner

All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change the timings at the same time. For
now just disable live M/N updates when bigjoiner is needed.

Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Disable port sync when bigjoiner is used

The current modeset sequence can't handle port sync and bigjoiner
at the same time. Refuse port sync when bigjoiner is needed,
at least until we fix the modeset sequence.

v2: Add a FIXME (Vandite)

Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit b37e1347b991459c38c56ec2476087854a4f720b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/psr: Disable PSR when bigjoiner is used

Bigjoiner seem to be causing all kinds of grief to the PSR
code currently. I don't believe there is any hardware issue
but the code simply not handling this correctly. For now
just disable PSR when bigjoiner is needed.

Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.mruthy@intel.com>
Acked-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 372fa0c79d3f289f813d8001e0a8a96d1011826c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/guc: Fix the fix for reset lock confusion

The previous fix for the circlular lock splat about the busyness
worker wasn't quite complete. Even though the reset-in-progress flag
is cleared at the start of intel_uc_reset_finish, the entire function
is still inside the reset mutex lock. Not sure why the patch appeared
to fix the issue both locally and in CI. However, it is now back
again.

There is a further complication that the wedge code path within
intel_gt_reset() jumps around so much that it results in nested
reset_prepare/_finish calls. That is, the call sequence is:
  intel_gt_reset
  | reset_prepare
  | __intel_gt_set_wedged
  | | reset_prepare
  | | reset_finish
  | reset_finish

The nested finish means that even if the clear of the in-progress flag
was moved to the end of _finish, it would still be clear for the
entire second call. Surprisingly, this does not seem to be causing any
other problems at present.

As an aside, a wedge on fini does not call the finish functions at
all. The reset_in_progress flag is left set (twice).

So instead of trying to cancel the worker anywhere at all in the reset
path, just add a cancel to intel_guc_submission_fini instead. Note
that it is not a problem if the worker is still active during a reset.
Either it will run before the reset path starts locking things and
will simply block the reset code for a tiny amount of time. Or it will
run after the locks have been acquired and will early exit due to the
try-lock.

Also, do not use the reset-in-progress flag to decide whether a
synchronous cancel is safe (from a lockdep perspective) or not.
Instead, use the actual reset mutex state (both the genuine one and
the custom rolled BACKOFF one).

Fixes: 0e00a8814eec ("drm/i915/guc: Avoid circular locking issue on busyness flush")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329235306.1559639-1-John.C.Harrison@Intel.com
(cherry picked from commit 3563d855312acedcd445a3767f0cb07906f1c26f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/hdcp: Fix get remote hdcp capability function

HDCP 1.x capability needs to be checked even if setup is not
HDCP 2.x capable.

--v2
-Assign hdcp_capable and hdcp2_capable to false [Chaitanya]

--v3
-Fix variable assignment [Chaitanya]

Fixes: 813cca96e4ac ("drm/i915/hdcp: Add new remote capability check shim function")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401055652.276785-2-suraj.kandpal@intel.com
(cherry picked from commit 6809f9246d43f7cb07310ca6a3deb7aa1c0ea938)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/cdclk: Fix voltage_level programming edge case

Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().

It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().

In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().

And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.

v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
    when the cdclk frequency is changing during the current
    commit phase (Gustavo)

Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
(cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/cdclk: Fix CDCLK programming order when pipes are active

Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.

If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.

Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.

The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.

v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use

Cc: stable@vger.kernel.org
Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
(cherry picked from commit 3aecee90ac12a351905f12dda7643d5b0676d6ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/client: Fully protect modes[] with dev->mode_config.mutex

The modes[] array contains pointers to modes on the connectors'
mode lists, which are protected by dev->mode_config.mutex.
Thus we need to extend modes[] the same protection or by the
time we use it the elements may already be pointing to
freed/reused memory.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10583
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404203336.10454-2-ville.syrjala@linux.intel.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>

gpu: host1x: Do not setup DMA for virtual devices

The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.

Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com

accel/ivpu: Fix deadlock in context_xa

ivpu_device->context_xa is locked both in kernel thread and IRQ context.
It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization
otherwise the lock could be acquired from a thread and interrupted by
an IRQ that locks it for the second time causing the deadlock.

This deadlock was reported by lockdep and observed in internal tests.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Fix missed error message after VPU rename

Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error
messages.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Return max freq for DRM_IVPU_PARAM_CORE_CLOCK_RATE

DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which
could be 0 if device was sleeping. This value isn't really useful to
the user space, so return max freq instead which can be used to estimate
NPU performance.

Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up")
Cc: <stable@vger.kernel.org> # v6.7
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Improve clarity of MMU error messages

This patch improves readability and clarity of MMU error messages.
Previously, the error strings were somewhat confusing and could lead to
ambiguous interpretations, making it difficult to diagnose issues.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Put NPU back to D3hot after failed resume

Put NPU in D3hot after ivpu_resume() fails to power up the device.
This will assure that D3->D0 power cycle will be performed before
the next resume and also will minimize power usage in this corner case.

Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Fix PCI D0 state entry in resume

In case of failed power up we end up left in PCI D3hot
state making it impossible to access NPU registers on retry.
Enter D0 state on retry before proceeding with power up sequence.

Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Remove d3hot_after_power_off WA

Always enter D3hot after entering D0i3 an all platforms.
This minimizes power usage.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Check return code of ipc->lock init

Return value of drmm_mutex_init(ipc->lock) was unchecked.

Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com

Linux 6.9-rc3

Merge tag 'x86-urgent-2024-04-07' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:

 - Fix MCE timer reinit locking

 - Fix/improve CoCo guest random entropy pool init

 - Fix SEV-SNP late disable bugs

 - Fix false positive objtool build warning

 - Fix header dependency bug

 - Fix resctrl CPU offlining bug

* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
  x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
  x86/CPU/AMD: Track SNP host status with cc_platform_*()
  x86/cc: Add cc_platform_set/_clear() helpers
  x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
  x86/coco: Require seeding RNG with RDRAND on CoCo systems
  x86/numa/32: Include missing <asm/pgtable_areas.h>
  x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline

Merge tag 'timers-urgent-2024-04-07' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Ingo Molnar:
 "Fix various timer bugs:

   - Fix a timer migration bug that may result in missed events

   - Fix timer migration group hierarchy event updates

   - Fix a PowerPC64 build warning

   - Fix a handful of DocBook annotation bugs"

* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Return early on deactivation
  timers/migration: Fix ignored event due to missing CPU update
  vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
  timers: Fix text inconsistencies and spelling
  tick/sched: Fix struct tick_sched doc warnings
  tick/sched: Fix various kernel-doc warnings
  timers: Fix kernel-doc format and add Return values
  time/timekeeping: Fix kernel-doc warnings and typos
  time/timecounter: Fix inline documentation

Merge tag 'perf-urgent-2024-04-07' of git://git./linux/kernel/git/tip/tip

Pull x86 perf fix from Ingo Molnar:
 "Fix a combined PEBS events bug on x86 Intel CPUs"

* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event

Merge tag 'nfsd-6.9-2' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:

 - Address a slow memory leak with RPC-over-TCP

 - Prevent another NFS4ERR_DELAY loop during CREATE_SESSION

* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
  SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP

Merge tag 'i2c-for-6.9-rc3' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:
 "A host driver build fix"

* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pxa: hide unused icr_bits[] variable

Merge tag 'xfs-6.9-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fix from Chandan Babu:

 - Allow creating new links to special files which were not associated
   with a project quota

* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: allow cross-linking special files without project quota

Merge tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

 - fix to retry close to avoid potential handle leaks when server
   returns EBUSY

 - DFS fixes including a fix for potential use after free

 - fscache fix

 - minor strncpy cleanup

 - reconnect race fix

 - deal with various possible UAF race conditions tearing sessions down

* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
  smb: client: fix potential UAF in smb2_is_network_name_deleted()
  smb: client: fix potential UAF in is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_lease_break()
  smb: client: fix potential UAF in cifs_stats_proc_show()
  smb: client: fix potential UAF in cifs_stats_proc_write()
  smb: client: fix potential UAF in cifs_dump_full_key()
  smb: client: fix potential UAF in cifs_debug_files_proc_show()
  smb3: retrying on failed server close
  smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
  smb: client: handle DFS tcons in cifs_construct_tcon()
  smb: client: refresh referral without acquiring refpath_lock
  smb: client: guarantee refcounted children from parent session
  cifs: Fix caching to try to do open O_WRONLY as rdwr on server
  smb: client: fix UAF in smb2_reconnect_server()
  smb: client: replace deprecated strncpy with strscpy

x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk

srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:

  vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0

Fixes: 4535e1a4174c ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org

Merge branch 'linus' into x86/urgent, to pick up dependent commit

We want to fix:

  0e110732473e ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")

So merge in Linus's latest into x86/urgent to have it available.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'i2c-host-fixes-6.9-rc3' of git://git./linux/kernel/git/andi.shyti/linux into i2c/for-current

An unused const variable kind of error has been fixed by placing
the definition of icr_bits[] inside the ifdef block where it is
used.

Merge tag 'firewire-fixes-6.9-rc2' of git://git./linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "The firewire-ohci kernel module has a parameter for verbose kernel
  logging. It is well-known that it logs the spurious IRQ for bus-reset
  event due to the unmasked register for IRQ event. This update fixes
  the issue"

* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: mask bus reset interrupts between ISR and bottom half

firewire: ohci: mask bus reset interrupts between ISR and bottom half

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.

Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Merge tag 'spi-fix-v6.9-rc2' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes, the most important being the
  s3c64xx change which is likely to be hit during normal operation"

* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
  spi: spi-fsl-lpspi: remove redundant spi_controller_put call
  spi: s3c64xx: Use DMA mode from fifo size

Merge tag 'regulator-fix-v6.9-rc2' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One simple regualtor fix, fixing module autoloading on tps65132"

* tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65132: Add of_match table

Merge tag 'regmap-fix-v6.9-rc2' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fixes from Mark Brown:
 "Richard found a nasty corner case in the maple tree code which he
  fixed, and also fixed a compiler warning which was showing up with the
  toolchain he uses and helpfully identified a possible incorrect error
  code which could have runtime impacts"

* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: Fix uninitialized symbol 'ret' warnings
  regmap: maple: Fix cache corruption in regcache_maple_drop()

Merge tag 'block-6.9-20240405' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Atomic queue limits fixes (Christoph)
      - Fabrics fixes (Hannes, Daniel)

 - Discard overflow fix (Li)

 - Cleanup fix for null_blk (Damien)

* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
  nvme-fc: rename free_ctrl callback to match name pattern
  nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
  nvmet: implement unique discovery NQN
  nvme: don't create a multipath node for zero capacity devices
  nvme: split nvme_update_zone_info
  nvme-multipath: don't inherit LBA-related fields for the multipath node
  block: fix overflow in blk_ioctl_discard()
  nullblk: Fix cleanup order in null_add_dev() error path

Merge tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

 - Backport of some fixes that came up during development of the 6.10
   io_uring patches. This includes some kbuf cleanups and reference
   fixes.

 - Disable multishot read if we don't have NOWAIT support on the target

 - Fix for a dependency issue with workqueue flushing

* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
  io_uring/kbuf: hold io_buffer_list reference over mmap
  io_uring/kbuf: protect io_buffer_list teardown with a reference
  io_uring/kbuf: get rid of bl->is_ready
  io_uring/kbuf: get rid of lower BGID lists
  io_uring: use private workqueue for exit work
  io_uring: disable io-wq execution of multishot NOWAIT requests
  io_uring/rw: don't allow multishot reads without NOWAIT support

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "The most important is the libsas fix, which is a problem for DMA to a
  kmalloc'd structure too small causing cache line interference. The
  other fixes (all in drivers) are mostly for allocation length fixes,
  error leg unwinding, suspend races and a missing retry"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix MCQ mode dev command timeout
  scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGN
  scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
  scsi: ufs: core: WLUN suspend dev/link state error recovery
  scsi: mylex: Fix sysfs buffer lengths

Merge tag 'devicetree-fixes-for-6.9-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Fix NIOS2 boot with external DTB

 - Add missing synchronization needed between fw_devlink and DT overlay
   removals

 - Fix some unit-address regex's to be hex only

 - Drop some 10+ year old "unstable binding" statements

 - Add new SoCs to QCom UFS binding

 - Add TPM bindings to TPM maintainers

* tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  nios2: Only use built-in devicetree blob if configured to do so
  dt-bindings: timer: narrow regex for unit address to hex numbers
  dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
  dt-bindings: remoteproc: ti,davinci: remove unstable remark
  dt-bindings: clock: ti: remove unstable remark
  dt-bindings: clock: keystone: remove unstable remark
  of: module: prevent NULL pointer dereference in vsnprintf()
  dt-bindings: ufs: qcom: document SM6125 UFS
  dt-bindings: ufs: qcom: document SC7180 UFS
  dt-bindings: ufs: qcom: document SC8180X UFS
  of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
  driver core: Introduce device_link_wait_removal()
  docs: dt-bindings: add missing address/size-cells to example
  MAINTAINERS: Add TPM DT bindings to TPM maintainers

Merge tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "8 hotfixes, 3 are cc:stable

  There are a couple of fixups for this cycle's vmalloc changes and one
  for the stackdepot changes. And a fix for a very old x86 PAT issue
  which can cause a warning splat"

* tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  stackdepot: rename pool_index to pool_index_plus_1
  x86/mm/pat: fix VM_PAT handling in COW mappings
  MAINTAINERS: change vmware.com addresses to broadcom.com
  selftests/mm: include strings.h for ffsl
  mm: vmalloc: fix lockdep warning
  mm: vmalloc: bail out early in find_vmap_area() if vmap is not init
  init: open output files from cpio unpacking with O_LARGEFILE
  mm/secretmem: fix GUP-fast succeeding on secretmem folios

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
 "arm64/ptrace fix to use the correct SVE layout based on the saved
  floating point state rather than the TIF_SVE flag. The latter may be
  left on during syscalls even if the SVE state is discarded"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/ptrace: Use saved floating point state type to determine SVE layout

Merge tag 'riscv-for-linus-6.9-rc3' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for an __{get,put}_kernel_nofault to avoid an uninitialized
   value causing spurious failures

 - compat_vdso.so.dbg is now installed to the standard install location

 - A fix to avoid initializing PERF_SAMPLE_BRANCH_*-related events, as
   they aren't supported and will just later fail

 - A fix to make AT_VECTOR_SIZE_ARCH correct now that we're providing
   AT_MINSIGSTKSZ

 - pgprot_nx() is now implemented, which fixes vmap W^X protection

 - A fix for the vector save/restore code, which at least manifests as
   corrupted vector state when a signal is taken

 - A fix for a race condition in instruction patching

 - A fix to avoid leaking the kernel-mode GP to userspace, which is a
   kernel pointer leak that can be used to defeat KASLR in various ways

 - A handful of smaller fixes to build warnings, an overzealous printk,
   and some missing tracing annotations

* tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: process: Fix kernel gp leakage
  riscv: Disable preemption when using patch_map()
  riscv: Fix warning by declaring arch_cpu_idle() as noinstr
  riscv: use KERN_INFO in do_trap
  riscv: Fix vector state restore in rt_sigreturn()
  riscv: mm: implement pgprot_nx
  riscv: compat_vdso: align VDSOAS build log
  RISC-V: Update AT_VECTOR_SIZE_ARCH for new AT_MINSIGSTKSZ
  riscv: Mark __se_sys_* functions __used
  drivers/perf: riscv: Disable PERF_SAMPLE_BRANCH_* while not supported
  riscv: compat_vdso: install compat_vdso.so.dbg to /lib/modules/*/vdso/
  riscv: hwprobe: do not produce frtace relocation
  riscv: Fix spurious errors from __get/put_kernel_nofault
  riscv: mm: Fix prototype to avoid discarding const

Merge tag 's390-6.9-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Alexander Gordeev:

 - Fix missing NULL pointer check when determining guest/host fault

 - Mark all functions in asm/atomic_ops.h, asm/atomic.h and
   asm/preempt.h as __always_inline to avoid unwanted instrumentation

 - Fix removal of a Processor Activity Instrumentation (PAI) sampling
   event in PMU device driver

 - Align system call table on 8 bytes

* tag 's390-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/entry: align system call table on 8 bytes
  s390/pai: fix sampling event removal for PMU device driver
  s390/preempt: mark all functions __always_inline
  s390/atomic: mark all functions __always_inline
  s390/mm: fix NULL pointer dereference

Merge tag 'pm-6.9-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
 "Fix a recent Energy Model change that went against a recent scheduler
  change made independently (Vincent Guittot)"

* tag 'pm-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: EM: fix wrong utilization estimation in em_cpu_energy()

Merge tag 'thermal-6.9-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fixes from Rafael Wysocki:
 "These fix two power allocator thermal governor issues and an ACPI
  thermal driver regression that all were introduced during the 6.8
  development cycle.

  Specifics:

   - Allow the power allocator thermal governor to bind to a thermal
     zone without cooling devices and/or without trip points (Nikita
     Travkin)

   - Make the ACPI thermal driver register a tripless thermal zone when
     it cannot find any usable trip points instead of returning an error
     from acpi_thermal_add() (Stephen Horvath)"

* tag 'thermal-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_power_allocator: Allow binding without trip points
  thermal: gov_power_allocator: Allow binding without cooling devices
  ACPI: thermal: Register thermal zones without valid trip points

Merge tag 'gpio-fixes-for-v6.9-rc3' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - make sure GPIO devices are registered with the subsystem before
   trying to return them to a caller of gpio_device_find()

 - fix two issues with incorrect sanitization of the interrupt labels

* tag 'gpio-fixes-for-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: cdev: fix missed label sanitizing in debounce_setup()
  gpio: cdev: check for NULL labels when sanitizing them for irqs
  gpiolib: Fix triggering "kobject: 'gpiochipX' is not initialized, yet" kobject_get() errors

Merge tag 'ata-6.9-rc3' of git://git./linux/kernel/git/libata/linux

Pull ata fixes from Damien Le Moal:

 - Compilation warning fixes from Arnd: one in the sata_sx4 driver due
   to an incorrect calculation of the parameters passed to memcpy() and
   another one in the sata_mv driver when CONFIG_PCI is not set

 - Drop the owner driver field assignment in the pata_macio driver. That
   is not needed as the PCI core code does that already (Krzysztof)

 - Remove an unusued field in struct st_ahci_drv_data of the ahci_st
   driver (Christophe)

 - Add a missing clock probe error check in the sata_gemini driver
   (Chen)

* tag 'ata-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: sata_gemini: Check clk_enable() result
  ata: sata_mv: Fix PCI device ID table declaration compilation warning
  ata: ahci_st: Remove an unused field in struct st_ahci_drv_data
  ata: pata_macio: drop driver owner assignment
  ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit

Merge tag 'sound-6.9-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This became a bit bigger collection of patches, but almost all are
  about device-specific fixes, and should be safe for 6.9:

   - Lots of ASoC Intel SOF-related fixes/updates

   - Locking fixes in SoundWire drivers

   - ASoC AMD ACP/SOF updates

   - ASoC ES8326 codec fixes

   - HD-audio codec fixes and quirks

   - A regression fix in emu10k1 synth code"

* tag 'sound-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (49 commits)
  ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path
  ASoC: SOF: amd: fix for false dsp interrupts
  ASoC: SOF: Intel: lnl: Disable DMIC/SSP offload on remove
  ASoC: Intel: avs: boards: Add modules description
  ASoC: codecs: ES8326: Removing the control of ADC_SCALE
  ASoC: codecs: ES8326: Solve a headphone detection issue after suspend and resume
  ASoC: codecs: ES8326: modify clock table
  ASoC: codecs: ES8326: Solve error interruption issue
  ALSA: line6: Zero-initialize message buffers
  ALSA: hda/realtek: cs35l41: Support ASUS ROG G634JYR
  ALSA: hda/realtek: Update Panasonic CF-SZ6 quirk to support headset with microphone
  ALSA: hda/realtek: Add sound quirks for Lenovo Legion slim 7 16ARHA7 models
  Revert "ALSA: emu10k1: fix synthesizer sample playback position and caching"
  OSS: dmasound/paula: Mark driver struct with __refdata to prevent section mismatch
  ALSA: hda/realtek: Add quirks for ASUS Laptops using CS35L56
  ASoC: amd: acp: fix for acp_init function error handling
  ASoC: tas2781: mark dvc_tlv with __maybe_unused
  ASoC: ops: Fix wraparound for mask in snd_soc_get_volsw
  ASoC: rt-sdw*: add __func__ to all error logs
  ASoC: rt722-sdca-sdw: fix locking sequence
  ...

Merge tag 'drm-fixes-2024-04-05' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Weekly fixes, mostly xe and i915, amdgpu on a week off, otherwise a
  nouveau fix for a crash with new vulkan cts tests, and a couple of
  cleanups and misc fixes.

  display:
   - fix typos in kerneldoc

  prime:
   - unbreak dma-buf export for virt-gpu

  nouveau:
   - uvmm: fix remap address calculation
   - minor cleanups

  panfrost:
   - fix power-transition timeouts

  xe:
   - Stop using system_unbound_wq for preempt fences
   - Fix saving unordered rebinding fences by attaching them as kernel
     feces to the vm's resv
   - Fix TLB invalidation fences completing out of order
   - Move rebind TLB invalidation to the ring ops to reduce the latency

  i915:
   - A few DisplayPort related fixes
   - eDP PSR fixes
   - Remove some VM space restrictions on older platforms
   - Disable automatic load CCS load balancing"

* tag 'drm-fixes-2024-04-05' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
  drm/xe: Use ordered wq for preempt fence waiting
  drm/xe: Move vma rebinding to the drm_exec locking loop
  drm/xe: Make TLB invalidation fences unordered
  drm/xe: Rework rebinding
  drm/xe: Use ring ops TLB invalidation for rebinds
  drm/i915/mst: Reject FEC+MST on ICL
  drm/i915/mst: Limit MST+DSC to TGL+
  drm/i915/dp: Fix the computation for compressed_bpp for DISPLAY < 13
  drm/i915/gt: Enable only one CCS for compute workload
  drm/i915/gt: Do not generate the command streamer for all the CCS
  drm/i915/gt: Disable HW load balancing for CCS
  drm/i915/gt: Limit the reserved VM space to only the platforms that need it
  drm/i915/psr: Fix intel_psr2_sel_fetch_et_alignment usage
  drm/i915/psr: Move writing early transport pipe src
  drm/i915/psr: Calculate PIPE_SRCSZ_ERLY_TPT value
  drm/i915/dp: Remove support for UHBR13.5
  drm/i915/dp: Fix DSC state HW readout for SST connectors
  drm/display: fix typo
  drm/prime: Unbreak virtgpu dma-buf export
  nouveau/uvmm: fix addr/range calcs for remap operations
  ...

drm/msm/adreno: Set highest_bank_bit for A619

The default highest_bank_bit of 15 didn't seem to cause issues so far
but downstream defines it to be 14. But similar to [0] leaving it on 14
(or 15 for that matter) causes some corruption issues with some
resolutions with DisplayPort, like 1920x1200.

So set it to 13 for now so that there's no screen corruption.

[0] commit 6a0dbcd20ef2 ("drm/msm/a6xx: set highest_bank_bit to 13 for a610")

Fixes: b7616b5c69e6 ("drm/msm/adreno: Add A619 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Patchwork: https://patchwork.freedesktop.org/patch/585215/
Signed-off-by: Rob Clark <robdclark@chromium.org>

stackdepot: rename pool_index to pool_index_plus_1

Commit 3ee34eabac2a ("lib/stackdepot: fix first entry having a 0-handle")
changed the meaning of the pool_index field to mean "the pool index plus
1".  This made the code accessing this field less self-documenting, as
well as causing debuggers such as drgn to not be able to easily remain
compatible with both old and new kernels, because they typically do that
by testing for presence of the new field.  Because stackdepot is a
debugging tool, we should make sure that it is debugger friendly.
Therefore, give the field a different name to improve readability as well
as enabling debugger backwards compatibility.

This is needed in 6.9, which would otherwise become an odd release with
the new semantics and old name so debuggers wouldn't recognize the new
semantics there.

Fixes: 3ee34eabac2a ("lib/stackdepot: fix first entry having a 0-handle")
Link: https://lkml.kernel.org/r/20240402001500.53533-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/Ib3e70c36c1d230dd0a118dc22649b33e768b9f88
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86/mm/pat: fix VM_PAT handling in COW mappings

PAT handling won't do the right thing in COW mappings: the first PTE (or,
in fact, all PTEs) can be replaced during write faults to point at anon
folios.  Reliably recovering the correct PFN and cachemode using
follow_phys() from PTEs will not work in COW mappings.

Using follow_phys(), we might just get the address+protection of the anon
folio (which is very wrong), or fail on swap/nonswap entries, failing
follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and
track_pfn_copy(), not properly calling free_pfn_range().

In free_pfn_range(), we either wouldn't call memtype_free() or would call
it with the wrong range, possibly leaking memory.

To fix that, let's update follow_phys() to refuse returning anon folios,
and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings
if we run into that.

We will now properly handle untrack_pfn() with COW mappings, where we
don't need the cachemode.  We'll have to fail fork()->track_pfn_copy() if
the first page was replaced by an anon folio, though: we'd have to store
the cachemode in the VMA to make this work, likely growing the VMA size.

For now, lets keep it simple and let track_pfn_copy() just fail in that
case: it would have failed in the past with swap/nonswap entries already,
and it would have done the wrong thing with anon folios.

Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn():

<--- C reproducer --->
 #include <stdio.h>
 #include <sys/mman.h>
 #include <unistd.h>
 #include <liburing.h>

 int main(void)
 {
         struct io_uring_params p = {};
         int ring_fd;
         size_t size;
         char *map;

         ring_fd = io_uring_setup(1, &p);
         if (ring_fd < 0) {
                 perror("io_uring_setup");
                 return 1;
         }
         size = p.sq_off.array + p.sq_entries * sizeof(unsigned);

         /* Map the submission queue ring MAP_PRIVATE */
         map = mmap(0, size, PROT_READ | PROT_WRITE, MAP_PRIVATE,
                    ring_fd, IORING_OFF_SQ_RING);
         if (map == MAP_FAILED) {
                 perror("mmap");
                 return 1;
         }

         /* We have at least one page. Let's COW it. */
         *map = 0;
         pause();
         return 0;
 }
<--- C reproducer --->

On a system with 16 GiB RAM and swap configured:
 # ./iouring &
 # memhog 16G
 # killall iouring
[  301.552930] ------------[ cut here ]------------
[  301.553285] WARNING: CPU: 7 PID: 1402 at arch/x86/mm/pat/memtype.c:1060 untrack_pfn+0xf4/0x100
[  301.553989] Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_g
[  301.558232] CPU: 7 PID: 1402 Comm: iouring Not tainted 6.7.5-100.fc38.x86_64 #1
[  301.558772] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebu4
[  301.559569] RIP: 0010:untrack_pfn+0xf4/0x100
[  301.559893] Code: 75 c4 eb cf 48 8b 43 10 8b a8 e8 00 00 00 3b 6b 28 74 b8 48 8b 7b 30 e8 ea 1a f7 000
[  301.561189] RSP: 0018:ffffba2c0377fab8 EFLAGS: 00010282
[  301.561590] RAX: 00000000ffffffea RBX: ffff9208c8ce9cc0 RCX: 000000010455e047
[  301.562105] RDX: 07fffffff0eb1e0a RSI: 0000000000000000 RDI: ffff9208c391d200
[  301.562628] RBP: 0000000000000000 R08: ffffba2c0377fab8 R09: 0000000000000000
[  301.563145] R10: ffff9208d2292d50 R11: 0000000000000002 R12: 00007fea890e0000
[  301.563669] R13: 0000000000000000 R14: ffffba2c0377fc08 R15: 0000000000000000
[  301.564186] FS:  0000000000000000(0000) GS:ffff920c2fbc0000(0000) knlGS:0000000000000000
[  301.564773] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  301.565197] CR2: 00007fea88ee8a20 CR3: 00000001033a8000 CR4: 0000000000750ef0
[  301.565725] PKRU: 55555554
[  301.565944] Call Trace:
[  301.566148]  <TASK>
[  301.566325]  ? untrack_pfn+0xf4/0x100
[  301.566618]  ? __warn+0x81/0x130
[  301.566876]  ? untrack_pfn+0xf4/0x100
[  301.567163]  ? report_bug+0x171/0x1a0
[  301.567466]  ? handle_bug+0x3c/0x80
[  301.567743]  ? exc_invalid_op+0x17/0x70
[  301.568038]  ? asm_exc_invalid_op+0x1a/0x20
[  301.568363]  ? untrack_pfn+0xf4/0x100
[  301.568660]  ? untrack_pfn+0x65/0x100
[  301.568947]  unmap_single_vma+0xa6/0xe0
[  301.569247]  unmap_vmas+0xb5/0x190
[  301.569532]  exit_mmap+0xec/0x340
[  301.569801]  __mmput+0x3e/0x130
[  301.570051]  do_exit+0x305/0xaf0
...

Link: https://lkml.kernel.org/r/20240403212131.929421-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Wupeng Ma <mawupeng1@huawei.com>
Closes: https://lkml.kernel.org/r/20240227122814.3781907-1-mawupeng1@huawei.com
Fixes: b1a86e15dc03 ("x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines")
Fixes: 5899329b1910 ("x86: PAT: implement track/untrack of pfnmap regions for x86 - v3")
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: change vmware.com addresses to broadcom.com

Update all remaining vmware.com email addresses to actual broadcom.com.

Add corresponding .mailmap entries for maintainers who contributed in the
past as the vmware.com address will start bouncing soon.

Maintainership update. Jeff Sipek has left VMware, Nick Shi will be
maintaining VMware PTP.

Link: https://lkml.kernel.org/r/20240402232334.33167-1-alexey.makhalov@broadcom.com
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Ajay Kaher <ajay.kaher@broadcom.com>
Acked-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Nick Shi <nick.shi@broadcom.com>
Acked-by: Bryan Tan <bryan-bt.tan@broadcom.com>
Acked-by: Vishnu Dasa <vishnu.dasa@broadcom.com>
Acked-by: Vishal Bhakta <vishal.bhakta@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: include strings.h for ffsl

Got a compilation error on Android for ffsl after 91b80cc5b39f
("selftests: mm: fix map_hugetlb failure on 64K page size systems")
included vm_util.h.

Link: https://lkml.kernel.org/r/20240329185814.16304-1-edliaw@google.com
Fixes: af605d26a8f2 ("selftests/mm: merge util.h into vm_util.h")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmalloc: fix lockdep warning

A lockdep reports a possible deadlock in the find_vmap_area_exceed_addr_lock()
function:

============================================
WARNING: possible recursive locking detected
6.9.0-rc1-00060-ged3ccc57b108-dirty #6140 Not tainted
--------------------------------------------
drgn/455 is trying to acquire lock:
ffff0000c00131d0 (&vn->busy.lock/1){+.+.}-{2:2}, at: find_vmap_area_exceed_addr_lock+0x64/0x124

but task is already holding lock:
ffff0000c0011878 (&vn->busy.lock/1){+.+.}-{2:2}, at: find_vmap_area_exceed_addr_lock+0x64/0x124

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&vn->busy.lock/1);
  lock(&vn->busy.lock/1);

 *** DEADLOCK ***

indeed it can happen if the find_vmap_area_exceed_addr_lock() gets called
concurrently because it tries to acquire two nodes locks.  It was done to
prevent removing a lowest VA found on a previous step.

To address this a lowest VA is found first without holding a node lock
where it resides.  As a last step we check if a VA still there because it
can go away, if removed, proceed with next lowest.

[akpm@linux-foundation.org: fix comment typos, per Baoquan]
Link: https://lkml.kernel.org/r/20240328140330.4747-1-urezki@gmail.com
Fixes: 53becf32aec1 ("mm: vmalloc: support multiple nodes in vread_iter")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Omar Sandoval <osandov@fb.com>
Reported-by: Jens Axboe <axboe@kernel.dk>
Cc: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmalloc: bail out early in find_vmap_area() if vmap is not init

During the boot the s390 system triggers "spinlock bad magic" messages
if the spinlock debugging is enabled:

[    0.465445] BUG: spinlock bad magic on CPU#0, swapper/0
[    0.465490]  lock: single+0x1860/0x1958, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[    0.466067] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-12955-g8e938e398669 #1
[    0.466188] Hardware name: QEMU 8561 QEMU (KVM/Linux)
[    0.466270] Call Trace:
[    0.466470]  [<00000000011f26c8>] dump_stack_lvl+0x98/0xd8
[    0.466516]  [<00000000001dcc6a>] do_raw_spin_lock+0x8a/0x108
[    0.466545]  [<000000000042146c>] find_vmap_area+0x6c/0x108
[    0.466572]  [<000000000042175a>] find_vm_area+0x22/0x40
[    0.466597]  [<000000000012f152>] __set_memory+0x132/0x150
[    0.466624]  [<0000000001cc0398>] vmem_map_init+0x40/0x118
[    0.466651]  [<0000000001cc0092>] paging_init+0x22/0x68
[    0.466677]  [<0000000001cbbed2>] setup_arch+0x52a/0x708
[    0.466702]  [<0000000001cb6140>] start_kernel+0x80/0x5c8
[    0.466727]  [<0000000000100036>] startup_continue+0x36/0x40

it happens because such system tries to access some vmap areas
whereas the vmalloc initialization is not even yet done:

[    0.465490] lock: single+0x1860/0x1958, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[    0.466067] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-12955-g8e938e398669 #1
[    0.466188] Hardware name: QEMU 8561 QEMU (KVM/Linux)
[    0.466270] Call Trace:
[    0.466470] dump_stack_lvl (lib/dump_stack.c:117)
[    0.466516] do_raw_spin_lock (kernel/locking/spinlock_debug.c:87 kernel/locking/spinlock_debug.c:115)
[    0.466545] find_vmap_area (mm/vmalloc.c:1059 mm/vmalloc.c:2364)
[    0.466572] find_vm_area (mm/vmalloc.c:3150)
[    0.466597] __set_memory (arch/s390/mm/pageattr.c:360 arch/s390/mm/pageattr.c:393)
[    0.466624] vmem_map_init (./arch/s390/include/asm/set_memory.h:55 arch/s390/mm/vmem.c:660)
[    0.466651] paging_init (arch/s390/mm/init.c:97)
[    0.466677] setup_arch (arch/s390/kernel/setup.c:972)
[    0.466702] start_kernel (init/main.c:899)
[    0.466727] startup_continue (arch/s390/kernel/head64.S:35)
[    0.466811] INFO: lockdep is turned off.
...
[    0.718250] vmalloc init - busy lock init 0000000002871860
[    0.718328] vmalloc init - busy lock init 00000000028731b8

Some background. It worked before because the lock that is in question
was statically defined and initialized. As of now, the locks and data
structures are initialized in the vmalloc_init() function.

To address that issue add the check whether the "vmap_initialized"
variable is set, if not find_vmap_area() bails out on entry returning NULL.

Link: https://lkml.kernel.org/r/20240323141544.4150-1-urezki@gmail.com
Fixes: 72210662c5a2 ("mm: vmalloc: offload free_vmap_area_lock lock")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

init: open output files from cpio unpacking with O_LARGEFILE

If a member of a cpio archive for an initrd or initrams is larger than
2Gb, we'll eventually fail to write to that file when we get to that
limit, unless O_LARGEFILE is set.

The problem can be seen with this recipe, assuming that BLK_DEV_RAM
is not configured:

cd /tmp
dd if=/dev/zero of=BIGFILE bs=1048576 count=2200
echo BIGFILE | cpio -o -H newc -R root:root > initrd.img
kexec -l /boot/vmlinuz-$(uname -r) --initrd=initrd.img --reuse-cmdline
kexec -e

The console will show 'Initramfs unpacking failed: write error'.  With
the patch, the error is gone.

Link: https://lkml.kernel.org/r/20240323152934.3307391-1-jsperbeck@google.com
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/secretmem: fix GUP-fast succeeding on secretmem folios

folio_is_secretmem() currently relies on secretmem folios being LRU
folios, to save some cycles.

However, folios might reside in a folio batch without the LRU flag set, or
temporarily have their LRU flag cleared.  Consequently, the LRU flag is
unreliable for this purpose.

In particular, this is the case when secretmem_fault() allocates a fresh
page and calls filemap_add_folio()->folio_add_lru().  The folio might be
added to the per-cpu folio batch and won't get the LRU flag set until the
batch was drained using e.g., lru_add_drain().

Consequently, folio_is_secretmem() might not detect secretmem folios and
GUP-fast can succeed in grabbing a secretmem folio, crashing the kernel
when we would later try reading/writing to the folio, because the folio
has been unmapped from the directmap.

Fix it by removing that unreliable check.

Link: https://lkml.kernel.org/r/20240326143210.291116-2-david@redhat.com
Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/lkml/CABOYnLyevJeravW=QrH0JUPYEcDN160aZFb7kwndm-J2rmz0HQ@mail.gmail.com/
Debugged-by: Miklos Szeredi <miklos@szeredi.hu>
Tested-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drm/msm: fix the `CRASHDUMP_READ` target of `a6xx_get_shader_block()`

Clang 14 in an (essentially) defconfig arm64 build for next-20240326
reports [1]:

    drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:843:6: error:
    variable 'out' set but not used [-Werror,-Wunused-but-set-variable]

The variable `out` in these functions is meant to compute the `target` of
`CRASHDUMP_READ()`, but in this case only the initial value (`dumper->iova
+ A6XX_CD_DATA_OFFSET`) was being passed.

Thus use `out` as it was intended by Connor [2].

There was an alternative patch at [3] that removed the variable
altogether, but that would only use the initial value.

Fixes: 64d6255650d4 ("drm/msm: More fully implement devcoredump for a7xx")
Closes: https://lore.kernel.org/lkml/CANiq72mjc5t4n25SQvYSrOEhxxpXYPZ4pPzneSJHEnc3qApu2Q@mail.gmail.com/ [1]
Link: https://lore.kernel.org/lkml/CACu1E7HhCKMJd6fixZSPiNAz6ekoZnkMTHTcLFVmbZ-9VoLxKg@mail.gmail.com/
Link: https://lore.kernel.org/lkml/20240307093727.1978126-1-colin.i.king@gmail.com/
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/584955/
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge branch 'acpi-thermal'

* acpi-thermal:
  ACPI: thermal: Register thermal zones without valid trip points

nfsd: hold a lighter-weight client reference over CB_RECALL_ANY

Currently the CB_RECALL_ANY job takes a cl_rpc_users reference to the
client. While a callback job is technically an RPC that counter is
really more for client-driven RPCs, and this has the effect of
preventing the client from being unhashed until the callback completes.

If nfsd decides to send a CB_RECALL_ANY just as the client reboots, we
can end up in a situation where the callback can't complete on the (now
dead) callback channel, but the new client can't connect because the old
client can't be unhashed. This usually manifests as a NFS4ERR_DELAY
return on the CREATE_SESSION operation.

The job is only holding a reference to the client so it can clear a flag
after the RPC completes. Fix this by having CB_RECALL_ANY instead hold a
reference to the cl_nfsdfs.cl_ref. Typically we only take that sort of
reference when dealing with the nfsdfs info files, but it should work
appropriately here to ensure that the nfs4_client doesn't disappear.

Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition")
Reported-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Merge tag '9p-for-6.9-rc3' of https://github.com/martinetd/linux

Pull minor 9p cleanups from Dominique Martinet:

 - kernel doc fix & removal of unused flag

 - fix some bogus debug statement for read/write

* tag '9p-for-6.9-rc3' of https://github.com/martinetd/linux:
  9p: remove SLAB_MEM_SPREAD flag usage
  9p: Fix read/write debug statements to report server reply
  9p/trans_fd: remove Excess kernel-doc comment

Merge tag '6.9-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:
 "Three fixes, all also for stable:

   - encryption fix

   - memory overrun fix

   - oplock break fix"

* tag '6.9-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: do not set SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1
  ksmbd: validate payload size in ipc response
  ksmbd: don't send oplock break if rename fails