fuzz: disable leak-detection for oss-fuzz builds

When we are building for OSS-Fuzz, we want to ensure that the fuzzer
targets are actually created, regardless of leaks. Leaks will be
detected by the subsequent tests of the individual fuzz-targets.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240527150001.325565-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>

fuzz: specify audiodev for usb-audio

Fixes test-failure on Fedora 40 CI.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240527040711.311865-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/tcg/s390x: Add per.S

Add a small test to avoid regressions.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-15-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Adjust check of noreturn in translate_one

If help_op is not set, ret == DISAS_NEXT.
Shift the test up from surrounding help_wout, help_cout
to skipping to out, as we do elsewhere in the function.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-14-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Simplify per_ifetch, per_check_exception

Set per_address and ilen in per_ifetch; this is valid for
all PER exceptions and will last until the end of the
instruction.  Therefore we don't need to give the same
data to per_check_exception.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-13-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Fix helper_per_ifetch flags

CPU state is read on the exception path.

Fixes: 83bb161299c ("target-s390x: PER instruction-fetch nullification event support")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240502054417.234340-12-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Raise exception from per_store_real

At this point the instruction is complete and there's nothing
left to do but raise the exception.  With this change we need
not make two helper calls for this event.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-11-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Raise exception from helper_per_branch

Drop from argument, since gbea has always been updated with
this address.  Add ilen argument for setting int_pgm_ilen.
Use update_cc_op before calling per_branch.

By raising the exception here, we need not call
per_check_exception later, which means we can clean up the
normal non-exception branch path.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-10-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Split per_breaking_event from per_branch_*

The breaking-event-address register is updated regardless
of PER being enabled.

Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-9-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Simplify help_branch

Always use a tcg branch, instead of movcond.  The movcond
was not a bad idea before PER was added, but since then
we have either 2 or 3 actions to perform on each leg of
the branch, and multiple movcond is inefficient.

Reorder the taken branch to be fallthrough of the tcg branch.

Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Introduce help_goto_indirect

Add a small helper to handle unconditional indirect jumps.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Disable conditional branch-to-next for PER

For PER, we require a conditional call to helper_per_branch
for the conditional branch.  Fold the remaining optimization
into a call to helper_goto_direct, which will take care of
the remaining gbea adjustment.

Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Record separate PER bits in TB flags

Record successful-branching, instruction-fetching, and
store-using-real-address.  The other PER bits are not used
during translation.  Having checked these at translation time,
we can remove runtime tests from the helpers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Update CR9 bits

Update from the PoO 14th edition.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Move cpu_get_tb_cpu_state out of line

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Do not use unwind for per_check_exception

Using exception unwind via tcg_s390_program_interrupt,
we discard the current value of psw.addr, which discards
the result of a branch.

Pass in the address of the next instruction, which may
not be sequential.  Pass in ilen, which we would have
gotten from unwind and is passed to the exception handler.
Sync cc_op before the call, which we would have gotten
from unwind.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-2-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>

Merge tag 'pull-block-jobs-2024-04-29-v2' of https://gitlab.com/vsementsov/qemu into staging

Block jobs patches for 2024-04-29

v2: add "iotests/pylintrc: allow up to 10 similar lines" to fix
    check-python-minreqs

- backup: discard-source parameter
- blockcommit: Reopen base image as RO after abort

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmZV4UwACgkQVh8kwfGf
# eftBIA/9Em1xR7yEK5gE9kiGc+qSBsRPB8sJZ/JB+GukDPvzQ+/CktIJJgTryI/q
# QC08KyHnuE6WknUfJPkV5kfINj8vTDtkMjwgccrMu8enc9W5wnRfVBQomS8qWpZY
# maJhyW+Sva7k82v/U1mpdur5cTF1cu8VmwMSNurBYVd84E33KHkgQikEbXSLzFBu
# N8dG4WOgtwuLmP5BMgg5ftzwC3W7qv+sq1DhnZwDATUKVbjX1lLtKAYwu66bH8du
# ekZtWqtJNJqRTcOIiSyl52lPm3xo9+U8khXWQ/lmq1jjvdKcC90y76bT16yIQw98
# 74aBiKSRu2MO/EraEgPQKU2LpSzbzr4Eu1kRjmDXcVDAB183vaFW3Ogym8BuGJ9n
# ZiNFYLZqOqUL4RkyaXEwci6THEyjHqQvK2HYGmjoidZPvATf5G52FWrKZT3S9LVT
# Q4oUhb6dQW4EtU4WoVJpqSg7xozVI/swJ04+gLTjQskitXQm2jX8ifD6MI+85tVp
# nntS5BtMfTe/z5K4L7bv8KOe7J+gK0NUo3YCdw3zQKa+u7tX/QQKnPmNtUK8ohjO
# g6wIuwrxn/GsHxvXaeOKftHyXBGDHYUSuIr7ByQ/WxS9nQaWW1UKk9WFC/XtUFND
# bHMfL+DidkUxMnZBe7Snz6gb16oEr0DsrsSyHe/J2dWrid6QJVA=
# =aSvT
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 May 2024 06:51:08 AM PDT
# gpg:                using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>" [unknown]
# gpg:                 aka "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E  86A1 561F 24C1 F19F 79FB

* tag 'pull-block-jobs-2024-04-29-v2' of https://gitlab.com/vsementsov/qemu:
  iotests/pylintrc: allow up to 10 similar lines
  iotests: add backup-discard-source
  qapi: blockdev-backup: add discard-source parameter
  block/copy-before-write: create block_copy bitmap in filter node
  block/copy-before-write: support unligned snapshot-discard
  block/copy-before-write: fix permission
  blockcommit: Reopen base image as RO after abort

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-target-arm-20240528' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * xlnx_dpdma: fix descriptor endianness bug
 * hvf: arm: Fix encodings for ID_AA64PFR1_EL1 and debug System registers
 * hw/arm/npcm7xx: remove setting of mp-affinity
 * hw/char: Correct STM32L4x5 usart register CR2 field ADD_0 size
 * hw/intc/arm_gic: Fix handling of NS view of GICC_APR<n>
 * hw/input/tsc2005: Fix -Wchar-subscripts warning in tsc2005_txrx()
 * hw: arm: Remove use of tabs in some source files
 * docs/system: Remove ADC from raspi documentation
 * target/arm: Start of the conversion of A64 SIMD to decodetree

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmZV5HsZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3j+CD/9V5kC3DJtovMiolr1z8YYI
# eRj0I/pKacgIzz9kVwzo+UVVgzXAi80VFO7xbe+aucCKs0c2s3wrUnUWkAaGHUYR
# DKhRIp017HKW8esgDVQsItn2030PLQLlhxpLvhSfN7NR2jHiJdE914Kb3h6XIEVE
# CqMRaYt9Vrh5o0e51VSzzccFK+kyYV1MDvNyx1/8F4KJpsMFeK0iy9WYrXx2UxlT
# dlrJZdrShIkOWiQB+bi6zQzjMveNmDicjBCgnC7TO2ayOl0AD24sNg/Z49w+4Hjb
# azUDYR45uuyQD5HJLyBsk5BcYhfyZttn2U5uTvNQ6SEfMuKUFEfdoSebTHngEb6t
# ObOdJW6+GmyaIaaJS99ea8u8jbe1r5zhQGJEBeEWOyGYTKUJ6Q0J+g6dZUdgniOp
# bvORX4qnIlMLMGGYT34410Wf0lsE88BHspcVX0WLGFLMZcEYsHhdgG6/f0p8D3nD
# m3R5+/BxUHK7A6OVe/1YU6jTqnfPBY6CGKSqEvXbJGlPp7LAjIxuUHBRxRnXU+Ad
# ohBwOIEEDNhGnEiiHFFK+wrc8BncXY4eSiJBCLlRaf1AcxCT6ibWXuUlpnWeAwNk
# E3Kmvq9BCdQZpIj7EsyvngTc5PsQrqK0FNIVuSVi38QQnqS/0oykvsPzgSlD6blP
# zcFIgG7aUiPOkdTxcPTYnA==
# =TjtM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 May 2024 07:04:43 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240528' of https://git.linaro.org/people/pmaydell/qemu-arm: (42 commits)
  target/arm: Convert disas_simd_3same_logic to decodetree
  target/arm: Convert FMLAL, FMLSL to decodetree
  target/arm: Use gvec for neon pmax, pmin
  target/arm: Convert SMAXP, SMINP, UMAXP, UMINP to decodetree
  target/arm: Use gvec for neon padd
  target/arm: Convert ADDP to decodetree
  target/arm: Use gvec for neon faddp, fmaxp, fminp
  target/arm: Convert FMAXP, FMINP, FMAXNMP, FMINNMP to decodetree
  target/arm: Convert FADDP to decodetree
  target/arm: Convert FRECPS, FRSQRTS to decodetree
  target/arm: Convert FABD to decodetree
  target/arm: Convert FCMEQ, FCMGE, FCMGT, FACGE, FACGT to decodetree
  target/arm: Convert FMLA, FMLS to decodetree
  target/arm: Convert FNMUL to decodetree
  target/arm: Expand vfp neg and abs inline
  target/arm: Introduce vfp_load_reg16
  target/arm: Convert FMAX, FMIN, FMAXNM, FMINNM to decodetree
  target/arm: Convert FADD, FSUB, FDIV, FMUL to decodetree
  target/arm: Convert FMULX to decodetree
  target/arm: Convert Advanced SIMD copy to decodetree
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Convert disas_simd_3same_logic to decodetree

This includes AND, ORR, EOR, BIC, ORN, BSF, BIT, BIF.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FMLAL, FMLSL to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use gvec for neon pmax, pmin

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert SMAXP, SMINP, UMAXP, UMINP to decodetree

These are the last instructions within handle_simd_3same_pair
so remove it.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use gvec for neon padd

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert ADDP to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use gvec for neon faddp, fmaxp, fminp

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FMAXP, FMINP, FMAXNMP, FMINNMP to decodetree

These are the last instructions within disas_simd_three_reg_same_fp16,
so remove it.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FADDP to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FRECPS, FRSQRTS to decodetree

These are the last instructions within handle_3same_float
and disas_simd_scalar_three_reg_same_fp16 so remove them.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FABD to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FCMEQ, FCMGE, FCMGT, FACGE, FACGT to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FMLA, FMLS to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FNMUL to decodetree

This is the last instruction within disas_fp_2src,
so remove that and its subroutines.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Expand vfp neg and abs inline

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Introduce vfp_load_reg16

Load and zero-extend float16 into a TCGv_i32 before
all scalar operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FMAX, FMIN, FMAXNM, FMINNM to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FADD, FSUB, FDIV, FMUL to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert FMULX to decodetree

Convert all forms (scalar, vector, scalar indexed, vector indexed),
which allows us to remove switch table entries elsewhere.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Advanced SIMD copy to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert XAR to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Cryptographic 3-register, imm2 to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Cryptographic 4-register to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Cryptographic 2-register SHA512 to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Cryptographic 3-register SHA512 to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Cryptographic 2-register SHA to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Cryptographic 3-register SHA to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Cryptographic AES to decodetree

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Split out gengvec64.c

Split some routines out of translate-a64.c and translate-sve.c
that are used by both.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Split out gengvec.c

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Verify sz=0 for Advanced SIMD scalar pairwise (fp16)

All of these insns have "if sz == '1' then UNDEFINED" in their pseudocode.
Fixes a RISU miscompare for invalid insn 0x5ef0c87a.

Fixes: 5c36d89567c ("arm/translate-a64: add all FP16 ops in simd_scalar_pairwise")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix decode of FMOV (hp) vs MOVI

The decode of FMOV (vector, immediate, half-precision) vs
invalid cases of MOVI are incorrect.

Fixes RISU mismatch for invalid insn 0x2f01fd31.

Fixes: 70b4e6a4457 ("arm/translate-a64: add FP16 FMOV to simd_mod_imm")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Zero-extend writeback for fp16 FCVTZS (scalar, integer)

Fixes RISU mismatch for "fcvtzs h31, h0, #14".

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use PLD, PLDW, PLI not NOP for t32

This fixes a bug in that neither PLI nor PLDW are present in ARMv6T2,
but are introduced with ARMv7 and ARMv7MP respectively.
For clarity, do not use NOP for PLD.

Note that there is no PLDW (literal). Architecturally in the
T1 encoding of "PLD (literal)" bit 5 is "(0)", which means
that it should be zero and if it is not then the behaviour
is CONSTRAINED UNPREDICTABLE (might UNDEF, NOP, or ignore the
value of the bit).

In our implementation we have patterns for both:

+    PLD          1111 1000 -001 1111 1111 ------------        # (literal)
+    PLD          1111 1000 -011 1111 1111 ------------        # (literal)

and so we effectively ignore the value of bit 5.  (This is a
permitted option for this CONSTRAINED UNPREDICTABLE.) This isn't a
behaviour change in this commit, since we previously had NOP lines
for both those patterns.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-3-richard.henderson@linaro.org
[PMM: adjusted commit message to note that PLD (lit) T1 bit 5
being 1 is an UNPREDICTABLE case.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/system: Remove ADC from raspi documentation

None of the RPi boards have ADC on-board. In real life, an external ADC chip
is required to operate on analog signals.

Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240512085716.222326-1-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw: arm: Remove use of tabs in some source files

Some of the source files for older devices use hardcoded tabs
instead of our current coding standard's required spaces.
Fix these in the following files:
- hw/arm/boot.c
- hw/char/omap_uart.c
- hw/gpio/zaurus.c
- hw/input/tsc2005.c

This commit is mostly whitespace-only changes; it also
adds curly-braces to some 'if' statements.

This addresses part of https://gitlab.com/qemu-project/qemu/-/issues/373
but some other files remain to be handled.

Signed-off-by: Tanmay Patil <tanmaynpatil105@gmail.com>
Message-id: 20240508081502.88375-1-tanmaynpatil105@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/input/tsc2005: Fix -Wchar-subscripts warning in tsc2005_txrx()

Check the function index is in range and use an unsigned
variable to avoid the following warning with GCC 13.2.0:

  [666/5358] Compiling C object libcommon.fa.p/hw_input_tsc2005.c.o
  hw/input/tsc2005.c: In function 'tsc2005_timer_tick':
  hw/input/tsc2005.c:416:26: warning: array subscript has type 'char' [-Wchar-subscripts]
    416 |     s->dav |= mode_regs[s->function];
        |                         ~^~~~~~~~~~

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240508143513.44996-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed missing ')']
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gic: Fix handling of NS view of GICC_APR<n>

In gic_cpu_read() and gic_cpu_write(), we delegate the handling of
reading and writing the Non-Secure view of the GICC_APR<n> registers
to functions gic_apr_ns_view() and gic_apr_write_ns_view().
Unfortunately we got the order of the arguments wrong, swapping the
CPU number and the register number (which the compiler doesn't catch
because they're both integers).

Most guests probably didn't notice this bug because directly
accessing the APR registers is typically something only done by
firmware when it is doing state save for going into a sleep mode.

Correct the mismatched call arguments.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: 51fd06e0ee ("hw/intc/arm_gic: Fix handling of GICC_APR<n>, GICC_NSAPR<n> registers")
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
[PMM: Rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée<alex.bennee@linaro.org>

hw/char: Correct STM32L4x5 usart register CR2 field ADD_0 size

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240505141613.387508-1-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/npcm7xx: remove setting of mp-affinity

The value of the mp-affinity property being set in npcm7xx_realize is
always the same as the default value it would have when arm_cpu_realizefn
is called if the property is not set here. So there is no need to set
the property value in npcm7xx_realize function.

Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240504141733.14813-1-dorjoychy111@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: arm: Fix encodings for ID_AA64PFR1_EL1 and debug System registers

We wrongly encoded ID_AA64PFR1_EL1 using {3,0,0,4,2} in hvf_sreg_match[] so
we fail to get the expected ARMCPRegInfo from cp_regs hash table with the
wrong key.

Fix it with the correct encoding {3,0,0,4,1}. With that fixed, the Linux
guest can properly detect FEAT_SSBS2 on my M1 HW.

All DBG{B,W}{V,C}R_EL1 registers are also wrongly encoded with op0 == 14.
It happens to work because HVF_SYSREG(CRn, CRm, 14, op1, op2) equals to
HVF_SYSREG(CRn, CRm, 2, op1, op2), by definition. But we shouldn't rely on
it.

Cc: qemu-stable@nongnu.org
Fixes: a1477da3ddeb ("hvf: Add Apple Silicon support")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20240503153453.54389-1-zenghui.yu@linux.dev
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xlnx_dpdma: fix descriptor endianness bug

Add xlnx_dpdma_read_descriptor() and
xlnx_dpdma_write_descriptor() functions.
xlnx_dpdma_read_descriptor() combines reading a
descriptor from desc_addr by calling dma_memory_read()
and swapping the desc fields from guest memory order
to host memory order. xlnx_dpdma_write_descriptor()
performs similar actions when writing a descriptor.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d3c6369a96 ("introduce xlnx-dpdma")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
[PMM: tweaked indent, dropped behaviour change for write-failure case]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

iotests/pylintrc: allow up to 10 similar lines

We want to have similar QMP objects in different tests. Reworking these
objects to make common parts by calling some helper functions doesn't
seem good. It's a lot more comfortable to see the whole QAPI request in
one place.

So, let's increase the limit, to unblock further commit
"iotests: add backup-discard-source"

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

iotests: add backup-discard-source

Add test for a new backup option: discard-source.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-6-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

qapi: blockdev-backup: add discard-source parameter

Add a parameter that enables discard-after-copy. That is mostly useful
in "push backup with fleecing" scheme, when source is snapshot-access
format driver node, based on copy-before-write filter snapshot-access
API:

[guest]      [snapshot-access] ~~ blockdev-backup ~~> [backup target]
   |            |
   | root       | file
   v            v
[copy-before-write]
   |             |
   | file        | target
   v             v
[active disk]   [temp.img]

In this case discard-after-copy does two things:

 - discard data in temp.img to save disk space
 - avoid further copy-before-write operation in discarded area

Note that we have to declare WRITE permission on source in
copy-before-write filter, for discard to work. Still we can't take it
unconditionally, as it will break normal backup from RO source. So, we
have to add a parameter and pass it thorough bdrv_open flags.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240313152822.626493-5-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

block/copy-before-write: create block_copy bitmap in filter node

Currently block_copy creates copy_bitmap in source node. But that is in
bad relation with .independent_close=true of copy-before-write filter:
source node may be detached and removed before .bdrv_close() handler
called, which should call block_copy_state_free(), which in turn should
remove copy_bitmap.

That's all not ideal: it would be better if internal bitmap of
block-copy object is not attached to any node. But that is not possible
now.

The simplest solution is just create copy_bitmap in filter node, where
anyway two other bitmaps are created.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-4-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

block/copy-before-write: support unligned snapshot-discard

First thing that crashes on unligned access here is
bdrv_reset_dirty_bitmap(). Correct way is to align-down the
snapshot-discard request.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-3-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

block/copy-before-write: fix permission

In case when source node does not have any parents, the condition still
works as required: backup job do create the parent by

  block_job_create -> block_job_add_bdrv -> bdrv_root_attach_child

Still, in this case checking @perm variable doesn't work, as backup job
creates the root blk with empty permissions (as it rely on CBW filter
to require correct permissions and don't want to create extra
conflicts).

So, we should not check @perm.

The hack may be dropped entirely when transactional insertion of
filter (when we don't try to recalculate permissions in intermediate
state, when filter does conflict with original parent of the source
node) merged (old big series
"[PATCH v5 00/45] Transactional block-graph modifying API"[1] and it's
current in-flight part is "[PATCH v8 0/7] blockdev-replace"[2])

[1] https://patchew.org/QEMU/20220330212902.590099-1-vsementsov@openvz.org/
[2] https://patchew.org/QEMU/20231017184444.932733-1-vsementsov@yandex-team.ru/

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-2-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

blockcommit: Reopen base image as RO after abort

If a blockcommit is aborted the base image remains in RW mode, that leads
to a fail of subsequent live migration.

How to reproduce:
  $ virsh snapshot-create-as vm snp1 --disk-only

  *** write something to the disk inside the guest ***

  $ virsh blockcommit vm vda --active --shallow && virsh blockjob vm vda --abort
  $ lsof /vzt/vm.qcow2
  COMMAND      PID USER   FD   TYPE DEVICE   SIZE/OFF NODE NAME
  qemu-syst 433203 root   45u   REG  253,0 1724776448  133 /vzt/vm.qcow2
  $ cat /proc/433203/fdinfo/45
  pos:    0
  flags:  02140002 <==== The last 2 means RW mode

If the base image is in RW mode at the end of blockcommit and was in RO
mode before blockcommit, reopen the base BDS in RO.

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20240404091136.129811-1-alexander.ivanov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

Merge tag 'pull-error-2024-05-27' of https://repo.or.cz/qemu/armbru into staging

Error reporting patches for 2024-05-27

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmZUaB8SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTnY0P/jr94u+NI8+Jykh8d/i5gz70dLS6F3oM
# PstnO9HXByCKeRRmTWesPnzd1idq9ZNnXTmZbriAv6sGduEBfOLyXmMLHj0L10EA
# tDrmFHQOS+9NcCeJ08SFRIgcxt6X9lUjGsoGXLxAfBZiWMsK18lXl5tTNGCtLQU5
# D1lc7byRHdVg+EzfhFqF6nU7UW63vNqtcwBElk1xc2zsU2yqX4pIvImTyRzUGC7h
# 8au68s3agFP/c98jgpljdI/V5TkgxAPa3OqkFXAjM9SLGi8szRxgLuMaufcOn5XQ
# F4/89GdhdvLGNFvpeBJyTud3NC0V2vDf7F4HABayHE8azYAu8/7H22SI+lvhnZi4
# m6yb2vP/x9+EVZxPoeT1TIY3N7W5wDJg8aIHCrLPtJXgnsBGTzEK6VydCeIjEl8Z
# Ai6WioKSFP6JhMT2a/6hAtceS2AWRnHhGx+BpaWYsr1FBWqJa4hgC+1IJWX3NI4G
# urmELw1B2RCOKB7jFusYNnKu67sVkT/eaxj+LcBwEi4XEddpCurqhi32SlpEJzcK
# JxQ/swGDD9hdx8Y5WPuRnUkPsvJO2uOJc50VSlDkdHg3ZCEgEhHuENOOvXjxtT5I
# nsgZEDRiUgn42AhhiFwulYUWt2dT/K974ZebEer305ajYaseilUQclATNlRNNVlV
# t16ViC6cIdCN
# =tAQ+
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 May 2024 04:01:51 AM PDT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]

* tag 'pull-error-2024-05-27' of https://repo.or.cz/qemu/armbru:
  qerror: QERR_QGA_COMMAND_FAILED is no longer used, drop
  qga: Shorten several error messages
  qga-win32: Improve guest-set-user-password, guest-file-open errors
  qerror: QERR_IO_ERROR is no longer used, drop
  migration: Rephrase message on failure to save / load Xen device state
  cpus: Improve error messages on memsave, pmemsave write error
  block/vmdk: Improve error messages on extent write error
  dump/win_dump: Improve error messages on write error
  block: Improve error message when external snapshot can't flush

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qerror: QERR_QGA_COMMAND_FAILED is no longer used, drop

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240514105829.729342-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>

qga: Shorten several error messages

Some, but not all error messages are of the form

    Guest agent command failed, error was '<actual error message>'

For instance, command guest-exec can fail with an error message like

    Guest agent command failed, error was 'Failed to execute child process “/bin/invalid-cmd42” (No such file or directory)'

Shorten this to just just the actual error message.  The guest-exec
example becomes

    Failed to execute child process “/bin/invalid-cmd42” (No such file or directory)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240514105829.729342-3-armbru@redhat.com>
[Superfluous #include "qapi/qmp/qerror.h" deleted]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>

qga-win32: Improve guest-set-user-password, guest-file-open errors

When guest-set-user-password's argument @password can't be converted
from UTF-8 to UTF-16, we report something like

    Guest agent command failed, error was 'Invalid sequence in conversion input'

Improve this to

    can't convert 'password' to UTF-16: Invalid sequence in conversion input

Likewise for argument @username, and guest-file-open argument @path,
even though I'm not sure you can actually get invalid input past the
QMP core there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240514105829.729342-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>

qerror: QERR_IO_ERROR is no longer used, drop

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

migration: Rephrase message on failure to save / load Xen device state

Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job.  When the caller does, the error is reported twice.  When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.

qmp_xen_save_devices_state() and qmp_xen_load_devices_state() violate
this principle: they call qemu_save_device_state() and
qemu_loadvm_state(), which call error_report_err().

I wish I could clean this up now, but migration's error reporting is
too complicated (confused?) for me to mess with it.

Instead, I'm merely improving the error reported by
qmp_xen_load_devices_state() and qmp_xen_load_devices_state() to the
QMP core from

    An IO error has occurred

to
    saving Xen device state failed

and

    loading Xen device state failed

respectively.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Peter Xu <peterx@redhat.com>

cpus: Improve error messages on memsave, pmemsave write error

qmp_memsave() and qmp_pmemsave() report fwrite() error as

    An IO error has occurred

Improve this to

    writing memory to '<filename>' failed

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

block/vmdk: Improve error messages on extent write error

vmdk_init_extent() reports blk_co_pwrite() failure to its caller as

    An IO error has occurred

The errno code returned by blk_co_pwrite() is lost.

Improve this to

    failed to write VMDK <what>: <description of errno>

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

dump/win_dump: Improve error messages on write error

create_win_dump() and write_run report qemu_write_full() failure to
their callers as

    An IO error has occurred

The errno set by qemu_write_full() is lost.

Improve this to

    win-dump: failed to write header: <description of errno>

and

    win-dump: failed to save memory: <description of errno>

This matches how dump.c reports similar errors.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

block: Improve error message when external snapshot can't flush

external_snapshot_action() reports bdrv_flush() failure to its caller
as

    An IO error has occurred

The errno code returned by bdrv_flush() is lost.

Improve this to

    Write to node '<device or node name>' failed: <description of errno>

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Merge tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu into staging

target/i386: Introduce X86Access and use for xsave and friends
linux-user/i386: Fix allocation and alignment of fp state in signal frame

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
# MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
# oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
# rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
# EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
# bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
# 0KPd/A==
# =sYrE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 26 May 2024 05:48:44 PM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu: (28 commits)
  target/i386: Pass host pointer and size to cpu_x86_{xsave,xrstor}
  target/i386: Pass host pointer and size to cpu_x86_{fxsave,fxrstor}
  target/i386: Pass host pointer and size to cpu_x86_{fsave,frstor}
  target/i386: Convert do_xrstor to X86Access
  target/i386: Convert do_xsave to X86Access
  linux-user/i386: Honor xfeatures in xrstor_sigcontext
  linux-user/i386: Fix allocation and alignment of fp state
  linux-user/i386: Return boolean success from xrstor_sigcontext
  linux-user/i386: Return boolean success from restore_sigcontext
  linux-user/i386: Fix -mregparm=3 for signal delivery
  linux-user/i386: Split out struct target_fregs_state
  linux-user/i386: Replace target_fpstate_fxsave with X86LegacyXSaveArea
  linux-user/i386: Remove xfeatures from target_fpstate_fxsave
  linux-user/i386: Drop xfeatures_size from sigcontext arithmetic
  target/i386: Add {hw,sw}_reserved to X86LegacyXSaveArea
  target/i386: Add rbfm argument to cpu_x86_{xsave,xrstor}
  target/i386: Split out do_xsave_chk
  target/i386: Convert do_xrstor_* to X86Access
  target/i386: Convert do_xsave_* to X86Access
  tagret/i386: Convert do_fxsave, do_fxrstor to X86Access
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Pass host pointer and size to cpu_x86_{xsave,xrstor}

We have already validated the memory region in the course of
validating the signal frame.  No need to do it again within
the helper function.

In addition, return failure when the header contains invalid
xstate_bv.  The kernel handles this via exception handling
within XSTATE_OP within xrstor_from_user_sigframe.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Pass host pointer and size to cpu_x86_{fxsave,fxrstor}

We have already validated the memory region in the course of
validating the signal frame.  No need to do it again within
the helper function.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Pass host pointer and size to cpu_x86_{fsave,frstor}

We have already validated the memory region in the course of
validating the signal frame.  No need to do it again within
the helper function.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Convert do_xrstor to X86Access

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Convert do_xsave to X86Access

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Honor xfeatures in xrstor_sigcontext

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Fix allocation and alignment of fp state

For modern cpus, the kernel uses xsave to store all extra
cpu state across the signal handler.  For xsave/xrstor to
work, the pointer must be 64 byte aligned.  Moreover, the
regular part of the signal frame must be 16 byte aligned.

Attempt to mirror the kernel code as much as possible.
Use enum FPStateKind instead of use_xsave() and use_fxsr().

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1648
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Return boolean success from xrstor_sigcontext

Invert the sense of the return value and use bool.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Return boolean success from restore_sigcontext

Invert the sense of the return value and use bool.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Fix -mregparm=3 for signal delivery

Since v2.6.19, the kernel has supported -mregparm=3.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Split out struct target_fregs_state

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Replace target_fpstate_fxsave with X86LegacyXSaveArea

Use the structure definition from target/i386/cpu.h.
The only minor quirk is re-casting the sw_reserved
area to the OS specific struct target_fpx_sw_bytes.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Remove xfeatures from target_fpstate_fxsave

This is easily computed by advancing past the structure.
At the same time, replace the magic number "64".

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/i386: Drop xfeatures_size from sigcontext arithmetic

This is subtracting sizeof(target_fpstate_fxsave) in
TARGET_FXSAVE_SIZE, then adding it again via &fxsave->xfeatures.
Perform the same computation using xstate_size alone.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Add {hw,sw}_reserved to X86LegacyXSaveArea

This completes the 512 byte structure, allowing the union to
be removed.  Assert that the structure layout is as expected.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Add rbfm argument to cpu_x86_{xsave,xrstor}

For now, continue to pass all 1's from signal.c.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Split out do_xsave_chk

This path is not required by user-only, and can in fact
be shared between xsave and xrstor.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Convert do_xrstor_* to X86Access

The body of do_xrstor is now fully converted.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Convert do_xsave_* to X86Access

The body of do_xsave is now fully converted.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tagret/i386: Convert do_fxsave, do_fxrstor to X86Access

Move the alignment fault from do_* to helper_*, as it need
not apply to usage from within user-only signal handling.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Convert do_xrstor_{fpu,mxcr,sse} to X86Access

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Convert do_xsave_{fpu,mxcr,sse} to X86Access

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>