Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
 * versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
 * versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
 * xlnx-zynqmp: Connect 4 TTC timers
 * exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
 * realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
 * stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
 * hw/core/irq: remove unused 'qemu_irq_split' function
 * npcm7xx: use symbolic constants for PWRON STRAP bit fields
 * virt: document impact of gic-version on max CPUs

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJhPSUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hAsD/4qzZK6LFL4kFH6E4z3tWIn
# ErHrfPGUt/SEfHLP+stQP/loFgkR1SNzcrIZ/HiDCB/W+IqQKuP+tHin2lMhO1tR
# KM6suUO1In2hoxfzimVta4F4GVN8ifY69qUYhaRxcBYSUpRXDNFJGsRIeT5JeUMd
# SArZUifRs7JUo25rIkg5Y+YZE37dmiA5gcuswtoLPa/UlDVqRxihLnItySmeutsc
# /Y8d/iym/ydlhvtL1OUt1KKYeg4ykrPzJCfvopsT2xgkwwB0PYci8//fa5IrRVlp
# Uw6yDssZrDIcXfVz88rdriILaszicCv8lOhTH6I74oXCatiyvi4BEzW8uGqVS8wt
# ff+AaKvGqb5t4GKKhCdpL2NzDwKBGWZHuruACs9IfvMkz62HE12Vr99qAKdQ3s93
# QnFIyUKg90mGkvKy8336zX3hnWjPH8wTASOXbNrgnt6GVLkqwy9ibug5kS+n77eJ
# BnkE5p3OfMVJ5a4o+iZbbDJKfzhNUHDSMIBbG1jRNzax1RgxOBtHFSqP5jmbpm+S
# agyr8h+Md0Tx1dwZKxdCGyvcbSZiG2WxRnci3dyT4MqYY1t1GEpOfcs1EN+CYKwG
# iuezZzJopjOFGaXQaB3OvbvCKxuroHKG61SmDmx+5OkfAxhrqe4ulwYij4jhsyhH
# t8zGzDOKLakv3li90xCX/w==
# =Rke9
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 04:16:53 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
  hw/arm: Use bit fields for NPCM7XX PWRON STRAPs
  hw/misc: Add PWRON STRAP bit fields in GCR module
  hw/arm/virt: impact of gic-version on max CPUs
  hw/core/irq: remove unused 'qemu_irq_split' function
  hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
  hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
  hw/arm/exynos4210: Drop Exynos4210Irq struct
  hw/arm/exynos4210: Put combiners into state struct
  hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()
  hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs
  hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners
  hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines
  hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()
  hw/arm/exynos4210: Delete unused macro definitions
  hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c
  hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct
  hw/arm/exynos4210: Put external GIC into state struct
  hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c
  hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]
  hw/arm/exynos4210: Coalesce board_irqs and irq_table
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/arm: Use bit fields for NPCM7XX PWRON STRAPs

This patch uses the defined fields to describe PWRON STRAPs for
better readability.

Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20220411165842.3912945-3-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Add PWRON STRAP bit fields in GCR module

Similar to the Aspeed code in include/misc/aspeed_scu.h, we define
the PWRON STRAP fields in their corresponding module for NPCM7XX.

Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20220411165842.3912945-2-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: impact of gic-version on max CPUs

Describe that the gic-version influences the maximum number of CPUs.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Message-id: 20220413231456.35811-1-heinrich.schuchardt@canonical.com
[PMM: minor punctuation tweaks]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/core/irq: remove unused 'qemu_irq_split' function

Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220324181557.203805-5-zongyuan.li@smartx.com
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/811
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'

Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220324181557.203805-3-zongyuan.li@smartx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'

Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220324181557.203805-2-zongyuan.li@smartx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/exynos4210: Drop Exynos4210Irq struct

The only time we use the int_combiner_irq[] and ext_combiner_irq[]
arrays in the Exynos4210Irq struct is during realize of the SoC -- we
initialize them with the input IRQs of the combiner devices, and then
connect those to outputs of other devices in
exynos4210_init_board_irqs().  Now that the combiner objects are
easily accessible as s->int_combiner and s->ext_combiner we can make
the connections directly from one device to the other without going
via these arrays.

Since these are the only two remaining elements of Exynos4210Irq,
we can remove that struct entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-19-peter.maydell@linaro.org

hw/arm/exynos4210: Put combiners into state struct

Switch the creation of the combiner devices to the new-style
"embedded in state struct" approach, so we can easily refer
to the object elsewhere during realize.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-18-peter.maydell@linaro.org

hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()

At this point, the function exynos4210_init_board_irqs() splits input
IRQ lines to connect them to the input combiner, output combiner and
external GIC.  The function exynos4210_combiner_get_gpioin() splits
some of the combiner input lines further to connect them to multiple
different inputs on the combiner.

Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a
configurable number of outputs, we can do all this in one place, by
making exynos4210_init_board_irqs() add extra outputs to the splitter
device when it must be connected to more than one input on each
combiner.

We do this with a new data structure, the combinermap, which is an
array each of whose elements is a list of the interrupt IDs on the
combiner which must be tied together.  As we loop through each
interrupt ID, if we find that it is the first one in one of these
lists, we configure the splitter device with eonugh extra outputs and
wire them up to the other interrupt IDs in the list.

Conveniently, for all the cases where this is necessary, the
lowest-numbered interrupt ID in each group is in the range of the
external combiner, so we only need to code for this in the first of
the two loops in exynos4210_init_board_irqs().

The old code in exynos4210_combiner_get_gpioin() which is being
deleted here had several problems which don't exist in the new code
in its handling of the multi-core timer interrupts:
 (1) the case labels specified bits 4 ... 8, but bit '8' doesn't
     exist; these should have been 4 ... 7
 (2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]
     multiple times as the input of several different splitters,
     which isn't allowed
 (3) in an apparent cut-and-paste error, the cases for all the
     multi-core timer inputs used "bit + 4" even though the
     bit range for the case was (intended to be) 4 ... 7, which
     meant it was looking at non-existent bits 8 ... 11.
None of these exist in the new code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-17-peter.maydell@linaro.org

hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs

The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0
and EXT_GIC_ID_MCT_G1 multiple times. This means that we will
connect multiple IRQs up to the same external GIC input, which
is not permitted. We do the same thing in the code in
exynos4210_init_board_irqs() because the conditionals selecting
an irq_id in the first loop match multiple interrupt IDs.

Overall we do this for interrupt IDs
(1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0
and
(1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1

These correspond to the cases for the multi-core timer that we are
wiring up to multiple inputs on the combiner in
exynos4210_combiner_get_gpioin().  That code already deals with all
these interrupt IDs being the same input source, so we don't need to
connect the external GIC interrupt for any of them except the first
(1, 4) and (1, 5). Remove the array entries and conditionals which
were incorrectly causing us to wire up extra lines.

This bug didn't cause any visible effects, because we only connect
up a device to the "primary" ID values (1, 4) and (1, 5), so the
extra lines would never be set to a level.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-16-peter.maydell@linaro.org

hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners

Currently for the interrupts MCT_G0 and MCT_G1 which are
the only ones in the input range of the external combiner
and which are also wired to the external GIC, we connect
them only to the internal combiner and the external GIC.
This seems likely to be a bug, as all other interrupts
which are in the input range of both combiners are
connected to both combiners. (The fact that the code in
exynos4210_combiner_get_gpioin() is also trying to wire
up these inputs on both combiners also suggests this.)

Wire these interrupts up to both combiners, like the rest.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-15-peter.maydell@linaro.org

hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines

In exynos4210_init_board_irqs(), the loop that handles IRQ lines that
are in a range that applies to the internal combiner only creates a
splitter for those interrupts which go to both the internal combiner
and to the external GIC, but it does nothing at all for the
interrupts which don't go to the external GIC, leaving the
irq_table[] array element empty for those.  (This will result in
those interrupts simply being lost, not in a QEMU crash.)

I don't have a reliable datasheet for this SoC, but since we do wire
up one interrupt line in this category (the HDMI I2C device on
interrupt 16,1), this seems like it must be a bug in the existing
QEMU code.  Fill in the irq_table[] entries where we're not splitting
the IRQ to both the internal combiner and the external GIC with the
IRQ line of the internal combiner.  (That is, these IRQ lines go to
just one device, not multiple.)

This bug didn't have any visible guest effects because the only
implemented device that was affected was the HDMI I2C controller,
and we never connect any I2C devices to that bus.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-14-peter.maydell@linaro.org

hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()

In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device
instead of qemu_irq_split().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-13-peter.maydell@linaro.org

hw/arm/exynos4210: Delete unused macro definitions

Delete a couple of #defines which are never used.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-12-peter.maydell@linaro.org

hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c

The function exynos4210_combiner_get_gpioin() currently lives in
exynos4210_combiner.c, but it isn't really part of the combiner
device itself -- it is a function that implements the wiring up of
some interrupt sources to multiple combiner inputs.  Move it to live
with the other SoC-level code in exynos4210.c, along with a few
macros previously defined in exynos4210.h which are now used only
in exynos4210.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-11-peter.maydell@linaro.org

hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct

The only time we use the ext_gic_irq[] array in the Exynos4210Irq
struct is during realize of the SoC -- we initialize it with the
input IRQs of the external GIC device, and then connect those to
outputs of other devices further on in realize (including in the
exynos4210_init_board_irqs() function).  Now that the ext_gic object
is easily accessible as s->ext_gic we can make the connections
directly from one device to the other without going via this array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-10-peter.maydell@linaro.org

hw/arm/exynos4210: Put external GIC into state struct

Switch the creation of the external GIC to the new-style "embedded in
state struct" approach, so we can easily refer to the object
elsewhere during realize.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-9-peter.maydell@linaro.org

hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c

The function exynos4210_init_board_irqs() currently lives in
exynos4210_gic.c, but it isn't really part of the exynos4210.gic
device -- it is a function that implements (some of) the wiring up of
interrupts between the SoC's GIC and combiner components.  This means
it fits better in exynos4210.c, which is the SoC-level code.  Move it
there. Similarly, exynos4210_git_irq() is used almost only in the
SoC-level code, so move it too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-8-peter.maydell@linaro.org

hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]

Fix a missing set of spaces around '-' in the definition of
combiner_grp_to_gic_id[]. We're about to move this code, so
fix the style issue first to keep checkpatch happy with the
code-motion patch.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-7-peter.maydell@linaro.org

hw/arm/exynos4210: Coalesce board_irqs and irq_table

The exynos4210 code currently has two very similar arrays of IRQs:

 * board_irqs is a field of the Exynos4210Irq struct which is filled
   in by exynos4210_init_board_irqs() with the appropriate qemu_irqs
   for each IRQ the board/SoC can assert
 * irq_table is a set of qemu_irqs pointed to from the
   Exynos4210State struct.  It's allocated in exynos4210_init_irq,
   and the only behaviour these irqs have is that they pass on the
   level to the equivalent board_irqs[] irq

The extra indirection through irq_table is unnecessary, so coalesce
these into a single irq_table[] array as a direct field in
Exynos4210State which exynos4210_init_board_irqs() fills in.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-6-peter.maydell@linaro.org

hw/arm/exynos4210: Drop int_gic_irq[] from Exynos4210Irq struct

The only time we use the int_gic_irq[] array in the Exynos4210Irq
struct is in the exynos4210_realize() function: we initialize it with
the GPIO inputs of the a9mpcore device, and then a bit later on we
connect those to the outputs of the internal combiner.  Now that the
a9mpcore object is easily accessible as s->a9mpcore we can make the
connection directly from one device to the other without going via
this array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-5-peter.maydell@linaro.org

hw/arm/exynos4210: Put a9mpcore device into state struct

The exynos4210 SoC mostly creates its child devices as if it were
board code.  This includes the a9mpcore object.  Switch that to a
new-style "embedded in the state struct" creation, because in the
next commit we're going to want to refer to the object again further
down in the exynos4210_realize() function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-4-peter.maydell@linaro.org

hw/intc/exynos4210_gic: Remove unused TYPE_EXYNOS4210_IRQ_GATE

Now we have removed the only use of TYPE_EXYNOS4210_IRQ_GATE we can
delete the device entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220404154658.565020-3-peter.maydell@linaro.org

hw/arm/exynos4210: Use TYPE_OR_IRQ instead of custom OR-gate device

The Exynos4210 SoC device currently uses a custom device
"exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ
line.  We have a standard TYPE_OR_IRQ device for this now, so use
that instead.

(This is a migration compatibility break, but that is OK for this
machine type.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-2-peter.maydell@linaro.org

hw/arm: versal: Connect the CRL

Connect the CRL (Clock Reset LPD) to the Versal SoC.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-5-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Add a model of the Xilinx Versal CRL

Add a model of the Xilinx Versal CRL.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: versal: Add the Cortex-R5Fs

Add the Cortex-R5Fs of the Versal RPU (Real-time Processing Unit)
subsystem.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-3-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: versal: Create an APU CPU Cluster

Create an APU CPU Cluster. This is in preparation to add the RPU.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-2-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-zynqmp: Connect 4 TTC timers

Connect the 4 TTC timers on the ZynqMP.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220331222017.2914409-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

timer: cadence_ttc: Break out header file to allow embedding

Break out header file to allow embedding of the the TTC.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220331222017.2914409-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF

It's not possible to provide the guest with the Security extensions
(TrustZone) when using KVM or HVF, because the hardware
virtualization extensions don't permit running EL3 guest code.
However, we weren't checking for this combination, with the result
that QEMU would assert if you tried it:

$ qemu-system-aarch64 -enable-kvm -machine virt,secure=on -cpu host -display none
Unexpected error in object_property_find_err() at ../../qom/object.c:1304:
qemu-system-aarch64: Property 'host-arm-cpu.secure-memory' not found
Aborted

Check for this combination of options and report an error, in the
same way we already do for attempts to give a KVM or HVF guest the
Virtualization or MTE extensions. Now we will report:

qemu-system-aarch64: mach-virt: KVM does not support providing Security extensions (TrustZone) to the guest CPU

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/961
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404155301.566542-1-peter.maydell@linaro.org

Merge tag 'pull-ppc-20220420-2' of https://gitlab.com/danielhb/qemu into staging

ppc patch queue for 2022-04-20

First batch of ppc patches for QEMU 7.1:

- skiboot firmware version bump
- pseries: add 2M DDW pagesize
- pseries: make virtual hypervisor code TCG only
- powernv: introduce GPIO lines for PSIHB device
- powernv: remove PCIE root bridge LSI
- target/ppc: alternative softfloat 128 bit integer support
- assorted fixes

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYmB/ngAKCRA82cqW3gMx
# ZE10AP4wPeJQ3fxXb5ylVtL4qkJaLWy6VrJBQSKSb5YEA0fhegEA9ZufpnENQePU
# gZF0eFAQK/DbSnDyvRQVpGcJM0K1UgI=
# =nVRw
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 02:48:14 PM PDT
# gpg:                using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Can't check signature: No public key

* tag 'pull-ppc-20220420-2' of https://gitlab.com/danielhb/qemu: (23 commits)
  hw/ppc: change indentation to spaces from TABs
  target/ppc: Add two missing register callbacks on POWER10
  ppc/pnv: Remove LSI on the PCIE host bridge
  pcie: Don't try triggering a LSI when not defined
  ppc/vof: Fix uninitialized string tracing
  hw/ppc/ppc405_boards: Initialize g_autofree pointer
  target/ppc: implement xscvqp[su]qz
  target/ppc: implement xscv[su]qqp
  softfloat: add float128_to_int128
  softfloat: add float128_to_uint128
  softfloat: add int128_to_float128
  softfloat: add uint128_to_float128
  qemu/int128: add int128_urshift
  target/ppc: Improve KVM hypercall trace
  spapr: Move nested KVM hypercalls under a TCG only config.
  spapr: Move hypercall_register_softmmu
  ppc/pnv: Remove useless checks in set_irq handlers
  ppc/pnv: Remove PnvPsiClas::irq_set
  ppc/pnv: Remove PnvOCC::psi link
  ppc/pnv: Remove PnvLpcController::psi link
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-tcg-20220420' of https://gitlab.com/rth7680/qemu into staging

Cleanup sysemu/tcg.h usage.
Fix indirect lowering vs cond branches
Remove ATOMIC_MMU_IDX
Add tcg_constant_ptr

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgW38dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8tpggApfg2CDI0bRMDBh0g
# 04/xwNnzHuSa84/ocMOMUfD5pvBblUmeTH8fAwqcAPDM/EEZwWZl2V1bYzuIrbmR
# 8zV+r1cOenDF5Tz8PWfy8XssinTVtTWh/TE0XNV9R/SbEM9eMsjHNu5osKVuLuq1
# rnHWZf8LuY7xGsy4GYqPN0dLE6HtQOfpj/eLGRAj9mZ7re0jKeWg3GdxYoiYDmks
# NKmNHYcWD+SjjFvXlOafniQsHbBZmQc/qp7AShG/+VcYY9o1VfncWD6I2dV13RdB
# N7++ZhGyQR4NOVo6CN1zLKhfuJqzH2q+qJ7vQ3xtXNAk53LGQ91zjoE+3KaJTrcy
# dmnLUw==
# =aKdS
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 12:14:07 PM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-tcg-20220420' of https://gitlab.com/rth7680/qemu:
  tcg: Add tcg_constant_ptr
  accel/tcg: Remove ATOMIC_MMU_IDX
  tcg: Fix indirect lowering vs TCG_OPF_COND_BRANCH
  Don't include sysemu/tcg.h if it is not necessary

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/ppc: change indentation to spaces from TABs

There are still some files in the QEMU PPC code base that use TABs for
indentation instead of using  spaces. The TABs should be replaced so
that we have a consistent coding style.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/374
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220412021240.2080218-1-qtxuning1999@sjtu.edu.cn>
[danielhb: trimmed commit msg to 72 chars per line]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Add two missing register callbacks on POWER10

This patch adds tcg accessors for 2 SPRs which were missing on P10:

- the TBU40 register is used to write the upper 40 bits of the
timebase register. It is used by kvm to update the timebase when
entering/exiting the guest on P9 and above. The missing definition was
causing erratic decrementer interrupts in a pseries/kvm guest running
in a powernv10/tcg host, typically resulting in hangs.

- the missing DPDES SPR was found through code inspection. It exists
unchanged on P10.

Both existed on previous versions of the processor and a bit of git
archaeology hints that they were added while the P10 model was already
being worked on so they may have simply fallen through the cracks.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220411125900.352028-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/pnv: Remove LSI on the PCIE host bridge

The phb3/phb4/phb5 root ports inherit from the default PCIE root port
implementation, which requests a LSI interrupt (#INTA). On real
hardware (POWER8/POWER9/POWER10), there is no such LSI. This patch
corrects it so that it matches the hardware.

As a consequence, the device tree previously generated was bogus, as
the root bridge LSI was not properly mapped. On some
implementation (powernv9), it was leading to inconsistent interrupt
controller (xive) data. With this patch, it is now clean.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220408131303.147840-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

pcie: Don't try triggering a LSI when not defined

This patch skips [de]asserting a LSI interrupt if the device doesn't
have any LSI defined. Doing so would trigger an assert in
pci_irq_handler().

The PCIE root port implementation in qemu requests a LSI (INTA), but a
subclass may want to change that behavior since it's a valid
configuration. For example on the POWER8/POWER9/POWER10 systems, the
root bridge doesn't request any LSI.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220408131303.147840-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/vof: Fix uninitialized string tracing

There are error paths which do not initialize propname but the trace_exit
label prints it anyway. This initializes the problem string.

Spotted by Coverity CID 1487241.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220406045013.3610172-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

hw/ppc/ppc405_boards: Initialize g_autofree pointer

Resolves the only compiler warning when building a full QEMU under Arch Linux:

  Compiling C object libqemu-ppc-softmmu.fa.p/hw_ppc_ppc405_boards.c.o
  In file included from /usr/include/glib-2.0/glib.h:114,
                   from qemu/include/glib-compat.h:32,
                   from qemu/include/qemu/osdep.h:132,
                   from ../src/hw/ppc/ppc405_boards.c:25:
  ../src/hw/ppc/ppc405_boards.c: In function ‘ref405ep_init’:
  /usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: warning: ‘filename’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     28 |   g_free (*pp);
        |   ^~~~~~~~~~~~
  ../src/hw/ppc/ppc405_boards.c:265:26: note: ‘filename’ was declared here
    265 |         g_autofree char *filename;
        |                          ^~~~~~~~

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220405123534.3395-1-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: implement xscvqp[su]qz

Implement the following PowerISA v3.1 instructions:
xscvqpsqz: VSX Scalar Convert with round to zero Quad-Precision to
           Signed Quadword
xscvqpuqz: VSX Scalar Convert with round to zero Quad-Precision to
           Unsigned Quadword

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: implement xscv[su]qqp

Implement the following PowerISA v3.1 instructions:
xscvsqqp: VSX Scalar Convert with round Signed Quadword to
          Quad-Precision
xscvuqqp: VSX Scalar Convert with round Unsigned Quadword to
          Quad-Precision format

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

softfloat: add float128_to_int128

Implements float128_to_int128 based on parts_float_to_int logic.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

softfloat: add float128_to_uint128

Implements float128_to_uint128 based on parts_float_to_uint logic.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

softfloat: add int128_to_float128

Based on parts_sint_to_float, implements int128_to_float128 to convert a
signed 128-bit value received through an Int128 argument.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220330175932.6995-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

softfloat: add uint128_to_float128

Based on parts_uint_to_float, implements uint128_to_float128 to convert
an unsigned 128-bit value received through an Int128 argument.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

qemu/int128: add int128_urshift

Implement an unsigned right shift for Int128 values and add the same
tests cases of int128_rshift in the unit test.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-3-matheus.ferst@eldorado.org.br>
[danielhb: fixed long lines in test_urshift()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Improve KVM hypercall trace

Before:

  kvm_handle_papr_hcall handle PAPR hypercall
  kvm_handle_papr_hcall handle PAPR hypercall
  kvm_handle_papr_hcall handle PAPR hypercall
  kvm_handle_papr_hcall handle PAPR hypercall
  kvm_handle_papr_hcall handle PAPR hypercall
  kvm_handle_papr_hcall handle PAPR hypercall

After:

  kvm_handle_papr_hcall 0x3a8
  kvm_handle_papr_hcall 0x3ac
  kvm_handle_papr_hcall 0x108
  kvm_handle_papr_hcall 0x104
  kvm_handle_papr_hcall 0x104
  kvm_handle_papr_hcall 0x108

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220325223316.276494-1-farosas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

spapr: Move nested KVM hypercalls under a TCG only config.

These are the spapr virtual hypervisor implementation of the nested
KVM API. They only make sense when running with TCG.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220325221113.255834-3-farosas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

spapr: Move hypercall_register_softmmu

I'm moving this because next patch will add more code under the ifdef
and it will be cleaner if we keep them together.

Also switch the ifdef branches to make it more convenient to add code
under CONFIG_TCG in the next patch.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220325221113.255834-2-farosas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/pnv: Remove useless checks in set_irq handlers

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-6-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/pnv: Remove PnvPsiClas::irq_set

All devices raising PSI interrupts are now converted to use GPIO lines
and the pnv_psi_irq_set() routines have become useless. Drop them.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-5-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/pnv: Remove PnvOCC::psi link

Use an anonymous output GPIO line to connect the OCC device with the
PSIHB device and raise the appropriate PSI IRQ line depending on the
processor model.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-4-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/pnv: Remove PnvLpcController::psi link

Create an anonymous output GPIO line to connect the LPC device with
the PSIHB device and raise the appropriate PSI IRQ line depending on
the processor model.

A temporary __pnv_psi_irq_set() routine is introduced to handle the
transition. It will be removed when all devices raising PSI interrupts
are converted to use GPIOs.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-3-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/pnv: Fix PSI IRQ definition

On HW, the PSI and FSP interrupt levels are muxed under the same
interrupt number. For coding reasons, an extra IRQ number was
introduced to index register values in an array. It increased the
count of IRQs which do not fit in the PSI IRQ range anymore.

The PSI and FSP interrupts should be modeled with an extra level of
GPIO lines but since QEMU does not support them, simply drop the extra
number to stay within the IRQ range.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-2-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/spapr/ddw: Add 2M pagesize

Recently the LoPAPR spec got a new 2MB pagesize to support in Dynamic DMA
Windows API (DDW), this adds the new flag.

Linux supports it since
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=38727311871

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220321071945.918669-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

ppc/pnv: Update skiboot to v7.0

This is skiboot 7.0 (commit 76b349cf7b40). Built using gcc 11.2.0 and
binutils 2.38.

Changes since the previous version:

Christophe Lombard (15):
      npu2: move opal api
      pau: introduce support
      rainier: detect pau devices
      pau: assign bars
      pau: create phb
      pau: enabling opencapi
      pau: translation layer configuration
      pau: enable interrupt on error
      pau: complete phb ops
      pau: hmi scom dump
      pau: phy init
      pau: link training
      pau: update current opal call functions
      pau: mmio invalidates
      pau: Add support for OpenCAPI Persistent Memory devices.

Cédric Le Goater (4):
      xive/p10: Fix xive_special_cache_check when DEBUG=1
      xive/p10: Fix mismatch errors when DEBUG=1
      interrupts: Do not advertise XICS support on P10
      skiboot v6.6.6 release notes

Frederic Barrat (6):
      phb4/5: Escalate page-level TCE kills
      npu3: Remove GPU support on Swift
      phb5: Remove obsolete capp-related properties
      xive/p10:: Declare xive2 DT node as an interrupt-controller
      skiboot v6.0.24 release notes
      opal-api: Drop diagnostics data type symbol for PHB5

Michael Ellerman (3):
      external/mambo: Print more info when the kernel is too big
      doc: Make it clear all existing platforms use Power9N
      docs: Add Swift, Mowgli & Rainier

Nicholas Piggin (12):
      external/mambo: Updates for POWER10 configuration for DD2.0
      external/mambo: Updates POWER9 SIM_CTRL1 to remove hardware atomic RC
      external/mambo: Add POWER10 small-core mode
      HBRT: fix clobbered r16 when host services handlers are called
      interrupts: add_opal_interrupts avoid NULL dereference on P10 mambo
      cpu: cpu_idle_job SMT priority fix
      cpu: add debug check in cpu_relax
      asm/head: Fix P10 HILE for little endian build
      phb4: annotate tbl_pest with endian types
      Remove support for POWER8 DD1
      phb3: make endian-clean
      flash: AST BMC endian fixes

Nick Child (1):
      secvar: Free md context on hash error

Ryan Grimm (1):
      AWAN simulator support for P10

Vasant Hegde (5):
      ci: Bump qemu version
      hello_world: Add p10 mambo tests
      skiboot v6.7.3 release notes
      skiboot v6.8.1 release notes
      skiboot v7.0 release notes

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

Merge tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu into staging

Clean up log locking.
Use the FILE* from qemu_log_trylock more often.
Support per-thread log files with -d tid.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgStUdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+c9Af/ZXnKe6bz5yjXy1mS
# mNIBJUPKrz1RXFfJxuCfEDWrtNc/gvQyvc3weZG5X0cXpiczeWA5V/9xbE9hu5gV
# 4rePiIHWmOrais6GZlqEu2F8P3/XyqdPHtcdBfa1hDneixtpqMHCqnh36nQjHyiU
# ogFxEJ/M9tTwhuWZrXe/JSYAiALEDYMK9bk4RUMOP1c4v37rXqUNOAM1IPhfxLL/
# bK9DQMpz5oUNsWWaqBQ2wQWHkNTOpUEkKGQv0xcQF5SdpYwaxakW9B7/h4QSeOUn
# oY6MFTmkJ4BPrLnkcubn+3PICc9LW0OFuzNnUdMCbeqVbjAUQrdMDalKpy4uNFv9
# U1VqHg==
# =Mt5s
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 11:03:01 AM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu: (39 commits)
  util/log: Support per-thread log files
  util/log: Limit RCUCloseFILE to file closing
  util/log: Rename QemuLogFile to RCUCloseFILE
  util/log: Combine two logfile closes
  util/log: Hoist the eval of is_daemonized in qemu_set_log_internal
  util/log: Rename qemu_logfile_mutex to global_mutex
  util/log: Rename qemu_logfile to global_file
  util/log: Rename logfilename to global_filename
  util/log: Remove qemu_log_close
  softmmu: Use qemu_set_log_filename_flags
  linux-user: Use qemu_set_log_filename_flags
  bsd-user: Use qemu_set_log_filename_flags
  util/log: Introduce qemu_set_log_filename_flags
  sysemu/os-win32: Test for and use _lock_file/_unlock_file
  include/qemu/log: Move entire implementation out-of-line
  include/exec/log: Do not reference QemuLogFile directly
  tests/unit: Do not reference QemuLogFile directly
  linux-user: Expand log_page_dump inline
  bsd-user: Expand log_page_dump inline
  util/log: Drop call to setvbuf
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add tcg_constant_ptr

Similar to tcg_const_ptr, defer to tcg_constant_{i32,i64}.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove ATOMIC_MMU_IDX

The last use of this macro was removed in f3e182b10013
("accel/tcg: Push trace info building into atomic_common.c.inc")

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Fix indirect lowering vs TCG_OPF_COND_BRANCH

With TCG_OPF_COND_BRANCH, we extended the lifetimes of
globals across extended basic blocks.  This means that
the liveness computed in pass 1 does not kill globals
in the same way as normal temps.

Introduce TYPE_EBB to match this lifetime, so that we
get correct register allocation for the temps that we
introduce during the indirect lowering pass.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b4cb76e6208 ("tcg: Do not kill globals at conditional branches")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Don't include sysemu/tcg.h if it is not necessary

This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu into staging

Testing, docs and gdbstub updates:

  - make -M virt test exercise -cpu max
  - document how binfmt_misc docker works
  - clean-up the devel TOC generation
  - clean-up check-tcg cross-compile behaviour
  - fix byte swap error in xmm gdbstub access
  - add float_convd test with reference files
  - more reference files for float_convs
  - more cleanly handle gdb crashing during check-tcg

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
# KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
# ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
# 4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
# wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
# mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
# QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
# =8q12
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 08:08:59 AM PDT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu: (25 commits)
  tests/guest-debug: better handle gdb crashes
  target/i386: fix byte swap issue with XMM register access
  tests/tcg: add missing reference files for float_convs
  tests/tcg: add float_convd test
  tests/tcg: remove duplicate sha512-sse case
  tests/tcg: fix non-static build
  tests/docker: remove SKIP_DOCKER_BUILD
  tests/tcg: isolate from QEMU's config-host.mak
  tests/tcg: invoke Makefile.target directly from QEMU's makefile
  tests/tcg: list test targets in Makefile.prereqs
  tests/tcg: prepare Makefile.prereqs at configure time
  tests/tcg: remove CONFIG_USER_ONLY from config-target.mak
  tests/tcg: remove CONFIG_LINUX_USER from config-target.mak
  tests/tcg: add compiler test variables when using containers
  tests/docker: do not duplicate rules for hexagon-cross
  tests/docker: simplify docker-TEST@IMAGE targets
  tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)
  tests/docker: inline variable definitions or move close to use
  tests/docker: remove unnecessary default definitions
  tests/docker: remove dead variable
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util/log: Support per-thread log files

Add a new log flag, tid, to turn this feature on.
Require the log filename to be set, and to contain %d.

Do not allow tid to be turned off once it is on, nor let
the filename be change thereafter.  This avoids the need
for signalling each thread to re-open on a name change.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-40-richard.henderson@linaro.org>

util/log: Limit RCUCloseFILE to file closing

Use FILE* for global_file.  We can perform an rcu_read on that
just as easily as RCUCloseFILE*.  This simplifies a couple of
places, where previously we required taking the rcu_read_lock
simply to avoid racing to dereference RCUCloseFile->fd.

Only allocate the RCUCloseFile prior to call_rcu.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-39-richard.henderson@linaro.org>

util/log: Rename QemuLogFile to RCUCloseFILE

s/QemuLogFile/RCUCloseFILE/
s/qemu_logfile_free/rcu_close_file/

Emphasize that this is only a carrier for passing a pointer
to call_rcu for closing, and not the real logfile.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-38-richard.henderson@linaro.org>

util/log: Combine two logfile closes

Merge the close from the changed_name block with the close
from the !need_to_open_file block.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-37-richard.henderson@linaro.org>

util/log: Hoist the eval of is_daemonized in qemu_set_log_internal

Only call is_daemonized once.
We require the result on all paths after this point.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-36-richard.henderson@linaro.org>

util/log: Rename qemu_logfile_mutex to global_mutex

Rename to emphasize this covers the file-scope global variables.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-35-richard.henderson@linaro.org>

util/log: Rename qemu_logfile to global_file

Rename to emphasize this is the file-scope global variable.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-34-richard.henderson@linaro.org>

util/log: Rename logfilename to global_filename

Rename to emphasize this is the file-scope global variable.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-33-richard.henderson@linaro.org>

util/log: Remove qemu_log_close

The only real use is in cpu_abort, where we have just
flushed the file via qemu_log_unlock, and are just about
to force-crash the application via abort.  We do not
really need to close the FILE before the abort.

The two uses in test-logging.c can be handled with
qemu_set_log_filename_flags.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-32-richard.henderson@linaro.org>

softmmu: Use qemu_set_log_filename_flags

Perform all logfile setup at startup in one step.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-31-richard.henderson@linaro.org>

linux-user: Use qemu_set_log_filename_flags

Perform all logfile setup in one step.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-30-richard.henderson@linaro.org>

bsd-user: Use qemu_set_log_filename_flags

Perform all logfile setup in one step.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-29-richard.henderson@linaro.org>

util/log: Introduce qemu_set_log_filename_flags

Provide a function to set both filename and flags at
the same time.  This is the common case at startup.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-28-richard.henderson@linaro.org>

sysemu/os-win32: Test for and use _lock_file/_unlock_file

The bug referenced in os-win32.h was fixed in mingw-w64 v6.

According to repology, version 5 used by ubuntu 18, which is
not yet out of support, so provide a meson link test for it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-27-richard.henderson@linaro.org>

include/qemu/log: Move entire implementation out-of-line

Move QemuLogFile, qemu_logfile, and all inline functions into qemu/log.c.
No need to expose these implementation details in the api.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-26-richard.henderson@linaro.org>

include/exec/log: Do not reference QemuLogFile directly

Use qemu_log_trylock/unlock instead of the raw rcu_read.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220417183019.755276-25-richard.henderson@linaro.org>

tests/unit: Do not reference QemuLogFile directly

Use qemu_log_lock/unlock instead of the raw rcu_read.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-24-richard.henderson@linaro.org>

linux-user: Expand log_page_dump inline

We have extra stuff to log at the same time.
Hoist the qemu_log_lock/unlock to the caller and use fprintf.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-23-richard.henderson@linaro.org>

bsd-user: Expand log_page_dump inline

We have extra stuff to log at the same time.
Hoist the qemu_log_trylock/unlock to the caller and use fprintf.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-22-richard.henderson@linaro.org>

util/log: Drop call to setvbuf

Now that the log buffer is flushed after every qemu_log_unlock,
which includes every call to qemu_log, we do not need to force
line buffering (or unbuffering for windows).  Block buffer the
entire loggable unit.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-21-richard.henderson@linaro.org>

util/log: Remove qemu_log_flush

All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>

util/log: Mark qemu_log_trylock as G_GNUC_WARN_UNUSED_RESULT

Now that all uses have been updated, consider a missing
test of the result of qemu_log_trylock a bug and Werror.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-19-richard.henderson@linaro.org>

util/log: Drop return value from qemu_log

The only user of this feature, tcg_dump_ops, has been
converted to use fprintf directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-18-richard.henderson@linaro.org>

util/log: Use qemu_log_trylock/unlock in qemu_log

Avoid using QemuLogFile and RCU directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-17-richard.henderson@linaro.org>

target/nios2: Remove log_cpu_state from reset

This is redundant with the logging done in cpu_common_reset.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-16-richard.henderson@linaro.org>

accel/tcg: Use cpu_dump_state between qemu_log_trylock/unlock

Inside log_cpu_state, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-15-richard.henderson@linaro.org>

exec/log: Remove log_disas and log_target_disas

These functions are no longer used.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-14-richard.henderson@linaro.org>

exec/translator: Pass the locked filepointer to disas_log hook

We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>

tcg: Pass the locked filepointer to tcg_dump_ops

We have already looked up and locked the filepointer.
Use fprintf instead of qemu_log directly for output
in and around tcg_dump_ops.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-12-richard.henderson@linaro.org>

util/log: Remove qemu_log_vprintf

This function is no longer used.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-11-richard.henderson@linaro.org>

*: Use fprintf between qemu_log_trylock/unlock

Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.

Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>

hw/xen: Split out xen_pv_output_msg

Do not replicate the individual logging statements.
Use qemu_log_trylock/unlock instead of qemu_log directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-9-richard.henderson@linaro.org>

util/log: Rename qemu_log_lock to qemu_log_trylock

This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.

To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>

util/log: Move qemu_log_lock, qemu_log_unlock out of line

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-7-richard.henderson@linaro.org>

os-posix: Use qemu_log_enabled

Do not reference qemu_logfile directly;
use the predicate provided by qemu/log.h.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-6-richard.henderson@linaro.org>

util/log: Pass Error pointer to qemu_set_log

Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>

util/log: Return bool from qemu_set_log_filename

Per the recommendations in qapi/error.h, return false on failure.

Use the return value in the monitor, the only place we aren't
already passing error_fatal or error_abort.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-4-richard.henderson@linaro.org>