Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190524-pull-request' into staging

ramfb: misc improvements.

# gpg: Signature made Fri 24 May 2019 09:56:59 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190524-pull-request:
  hw/display/ramfb: initialize fw-config space with xres/ yres
  hw/display/ramfb: lock guest resolution after it's set
  hw/display/ramfb: fix guest memory un-mapping

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190522' into staging

Misc gvec improvements

# gpg: Signature made Wed 22 May 2019 23:25:48 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190522:
  tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store
  tcg/aarch64: Allow immediates for vector ORR and BIC
  tcg/aarch64: Build vector immediates with two insns
  tcg/aarch64: Use MVNI in tcg_out_dupi_vec
  tcg/aarch64: Split up is_fimm
  tcg/aarch64: Support vector bitwise select value
  tcg/i386: Use umin/umax in expanding unsigned compare
  tcg/i386: Remove expansion for missing minmax
  tcg/i386: Support vector comparison select value
  tcg: Add TCG_OPF_NOT_PRESENT if TCG_TARGET_HAS_foo is negative
  tcg: Expand vector minmax using cmp+cmpsel
  tcg: Introduce do_op3_nofail for vector expansion
  tcg: Add support for vector compare select
  tcg: Add support for vector bitwise select
  tcg: Fix missing checks and clears in tcg_gen_gvec_dup_mem
  tcg/i386: Fix dupi/dupm for avx1 and 32-bit hosts

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190523' into staging

target-arm queue:
 * exynos4210: QOM'ify the Exynos4210 SoC
 * exynos4210: Add DMA support for the Exynos4210
 * arm_gicv3: Fix writes to ICC_CTLR_EL3
 * arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1}
 * target/arm: Fix vector operation segfault
 * target/arm: Minor improvements to BFXIL, EXTR

# gpg: Signature made Thu 23 May 2019 15:22:55 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190523:
  hw/arm/exynos4210: QOM'ify the Exynos4210 SoC
  hw/arm/exynos4210: Add DMA support for the Exynos4210
  hw/arm/exynos4: Use the IEC binary prefix definitions
  hw/arm/exynos4: Remove unuseful debug code
  hw/intc/arm_gicv3: Fix writes to ICC_CTLR_EL3
  hw/intc/arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1}
  arm: Rename hw/arm/arm.h to hw/arm/boot.h
  arm: Remove unnecessary includes of hw/arm/arm.h
  arm: Move system_clock_scale to armv7m_systick.h
  target/arm: Fix vector operation segfault
  target/arm: Simplify BFXIL expansion
  target/arm: Use extract2 for EXTR

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/display/ramfb: initialize fw-config space with xres/ yres

If xres / yres were specified in QEMU command line, write them as an initial
resolution to the fw-config space on guest reset, which a later BIOS / OVMF
patch can take advantage of.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-4-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/display/ramfb: lock guest resolution after it's set

Only allow one resolution change per guest boot, which prevents a
crash when the guest writes garbage to the configuration space (e.g.
when rebooting).

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-3-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/display/ramfb: fix guest memory un-mapping

Pulled back the `qemu_create_displaysurface_guestmem` function to create
the display surface so that the guest memory gets properly unmapped.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-2-marcel.apfelbaum@gmail.com
[rename the new functions and use QEMU coding style]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/arm/exynos4210: QOM'ify the Exynos4210 SoC

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190520214342.13709-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/exynos4210: Add DMA support for the Exynos4210

QEMU already supports pl330. Instantiate it for Exynos4210.

Relevant part of Linux arch/arm/boot/dts/exynos4.dtsi:

/ {
    soc: soc {
        amba {
            pdma0: pdma@12680000 {
                compatible = "arm,pl330", "arm,primecell";
                reg = <0x12680000 0x1000>;
                interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&clock CLK_PDMA0>;
                clock-names = "apb_pclk";
                #dma-cells = <1>;
                #dma-channels = <8>;
                #dma-requests = <32>;
            };
            pdma1: pdma@12690000 {
                compatible = "arm,pl330", "arm,primecell";
                reg = <0x12690000 0x1000>;
                interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&clock CLK_PDMA1>;
                clock-names = "apb_pclk";
                #dma-cells = <1>;
                #dma-channels = <8>;
                #dma-requests = <32>;
            };
            mdma1: mdma@12850000 {
                compatible = "arm,pl330", "arm,primecell";
                reg = <0x12850000 0x1000>;
                interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&clock CLK_MDMA>;
                clock-names = "apb_pclk";
                #dma-cells = <1>;
                #dma-channels = <8>;
                #dma-requests = <1>;
            };
        };
    };
};

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190520214342.13709-4-philmd@redhat.com
[PMD: Do not set default qdev properties, create the controllers in the SoC
      rather than the board (Peter Maydell), add dtsi in commit message]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/exynos4: Use the IEC binary prefix definitions

It eases code review, unit is explicit.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190520214342.13709-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/exynos4: Remove unuseful debug code

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190520214342.13709-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Fix writes to ICC_CTLR_EL3

The ICC_CTLR_EL3 register includes some bits which are aliases
of bits in the ICC_CTLR_EL1(S) and (NS) registers. QEMU chooses
to keep those bits in the cs->icc_ctlr_el1[] struct fields.
Unfortunately a missing '~' in the code to update the bits
in those fields meant that writing to ICC_CTLR_EL3 would corrupt
the ICC_CLTR_EL1 register values.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190520162809.2677-5-peter.maydell@linaro.org

hw/intc/arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1}

In ich_vmcr_write() we enforce "writes of BPR fields to less than
their minimum sets them to the minimum" by doing a "read vbpr and
write it back" operation.  A typo here meant that we weren't handling
writes to these fields correctly, because we were reading from VBPR0
but writing to VBPR1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190520162809.2677-4-peter.maydell@linaro.org

arm: Rename hw/arm/arm.h to hw/arm/boot.h

The header file hw/arm/arm.h now includes only declarations
relating to hw/arm/boot.c functionality. Rename it accordingly,
and adjust its header comment.

The bulk of this commit was created via
 perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h

In a few cases we can just delete the #include:
hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and
include/hw/arm/bcm2836.h did not require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-4-peter.maydell@linaro.org

arm: Remove unnecessary includes of hw/arm/arm.h

The hw/arm/arm.h header now only includes declarations relating
to boot.c code, so it is only needed by Arm board or SoC code.
Remove some unnecessary inclusions of it from target/arm files
and from hw/intc/armv7m_nvic.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-3-peter.maydell@linaro.org

arm: Move system_clock_scale to armv7m_systick.h

The system_clock_scale global is used only by the armv7m systick
device; move the extern declaration to the armv7m_systick.h header,
and expand the comment to explain what it is and that it should
ideally be replaced with a different approach.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-2-peter.maydell@linaro.org

target/arm: Fix vector operation segfault

Commit 89e68b575 "target/arm: Use vector operations for saturation"
causes this abort() when booting QEMU ARM with a Cortex-A15:

0  0x00007ffff4c2382f in raise () at /usr/lib/libc.so.6
1  0x00007ffff4c0e672 in abort () at /usr/lib/libc.so.6
2  0x00005555559c1839 in disas_neon_data_insn (insn=<optimized out>, s=<optimized out>) at ./target/arm/translate.c:6673
3  0x00005555559c1839 in disas_neon_data_insn (s=<optimized out>, insn=<optimized out>) at ./target/arm/translate.c:6386
4  0x00005555559cd8a4 in disas_arm_insn (insn=4081107068, s=0x7fffe59a9510) at ./target/arm/translate.c:9289
5  0x00005555559cd8a4 in arm_tr_translate_insn (dcbase=0x7fffe59a9510, cpu=<optimized out>) at ./target/arm/translate.c:13612
6  0x00005555558d1d39 in translator_loop (ops=0x5555561cc580 <arm_translator_ops>, db=0x7fffe59a9510, cpu=0x55555686a2f0, tb=<optimized out>, max_insns=<optimized out>) at ./accel/tcg/translator.c:96
7  0x00005555559d10d4 in gen_intermediate_code (cpu=cpu@entry=0x55555686a2f0, tb=tb@entry=0x7fffd7840080 <code_gen_buffer+126091347>, max_insns=max_insns@entry=512) at ./target/arm/translate.c:13901
8  0x00005555558d06b9 in tb_gen_code (cpu=cpu@entry=0x55555686a2f0, pc=3067096216, cs_base=0, flags=192, cflags=-16252928, cflags@entry=524288) at ./accel/tcg/translate-all.c:1736
9  0x00005555558ce467 in tb_find (cf_mask=524288, tb_exit=1, last_tb=0x7fffd783e640 <code_gen_buffer+126084627>, cpu=0x1) at ./accel/tcg/cpu-exec.c:407
10 0x00005555558ce467 in cpu_exec (cpu=cpu@entry=0x55555686a2f0) at ./accel/tcg/cpu-exec.c:728
11 0x000055555588b0cf in tcg_cpu_exec (cpu=0x55555686a2f0) at ./cpus.c:1431
12 0x000055555588d223 in qemu_tcg_cpu_thread_fn (arg=0x55555686a2f0) at ./cpus.c:1735
13 0x000055555588d223 in qemu_tcg_cpu_thread_fn (arg=arg@entry=0x55555686a2f0) at ./cpus.c:1709
14 0x0000555555d2629a in qemu_thread_start (args=<optimized out>) at ./util/qemu-thread-posix.c:502
15 0x00007ffff4db8a92 in start_thread () at /usr/lib/libpthread.

This patch ensures that we don't hit the abort() in the second switch
case in disas_neon_data_insn() as we will return from the first case.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: ad91b397f360b2fc7f4087e476f7df5b04d42ddb.1558021877.git.alistair.francis@wdc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Simplify BFXIL expansion

The mask implied by the extract is redundant with the one
implied by the deposit.  Also, fix spelling of BFXIL.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190514011129.11330-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use extract2 for EXTR

This is, after all, how we implement extract2 in tcg/aarch64.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190514011129.11330-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20190523-pull-request' into staging

fw_cfg patches for 2019-05-23

- Add trace events
- Get rid of globals in fw_cfg-test
- Explicit 'reboot-timeout' is little endian
- Add tests for 'reboot-timeout' and 'splash-time'

# gpg: Signature made Thu 23 May 2019 13:40:32 BST
# gpg:                using RSA key E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/fw_cfg-20190523-pull-request:
  tests: fw_cfg: add 'splash-time' test case
  tests: fw_cfg: add 'reboot-timeout' test case
  hw/nvram/fw_cfg: Store 'reboot-timeout' as little endian
  tests: fw_cfg: add a function to get the fw_cfg file
  tests: refactor fw_cfg_test
  tests/fw_cfg: Free QFWCFG object after qtest has run
  tests/libqos: Add pc_fw_cfg_uninit() and use it
  tests/libqos: Add io_fw_cfg_uninit() and mm_fw_cfg_uninit()
  hw/sparc64: Implement fw_cfg_arch_key_name()
  hw/sparc: Implement fw_cfg_arch_key_name()
  hw/ppc: Implement fw_cfg_arch_key_name()
  hw/i386: Implement fw_cfg_arch_key_name()
  hw/i386: Extract fw_cfg definitions to local "fw_cfg.h"
  hw/nvram/fw_cfg: Add fw_cfg_arch_key_name()
  hw/nvram/fw_cfg: Add trace events

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests: fw_cfg: add 'splash-time' test case

Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-6-liq3ea@163.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

tests: fw_cfg: add 'reboot-timeout' test case

Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-5-liq3ea@163.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/nvram/fw_cfg: Store 'reboot-timeout' as little endian

The current codebase is not specific about the endianess of the
fw_cfg 'file' entry 'reboot-timeout'.

Per docs/specs/fw_cfg.txt:

  === All Other Data Items ===

  Please consult the QEMU source for the most up-to-date
  and authoritative list of selector keys and their respective
  items' purpose, format and writeability.

Checking the git history, this code was introduced in commit
ac05f3492421, very similar to commit 3d3b8303c6f8 for the
'boot-menu-wait' entry, which explicitely use little-endian.

OVMF consumes 'boot-menu-wait' as little-endian, however it does
not consume 'reboot-timeout'.

Regarding the git history and OVMF use, we choose to explicit
'reboot-timeout' endianess as little-endian.

Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-4-liq3ea@163.com>
[PMD: Reword commit description based on review comments]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

tests: fw_cfg: add a function to get the fw_cfg file

This is useful to write qtest about fw_cfg file entry.

Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-3-liq3ea@163.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

tests: refactor fw_cfg_test

Currently, fw_cfg_test uses one QTestState for every test case.
This will add all command lines for every test case and
this is unnecessary. This patch split the test cases and for
every test case it uses his own QTestState. This patch does following
things:

1. Get rid of the global 'fw_cfg', this need add a uninit function

2. Convert every test case in a separate QTestState

After this patch, we can add fw_cfg test case freely and will not
have effect on other test cases.

Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
[PMD: Removed 'ret' local variable in main()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

tests/fw_cfg: Free QFWCFG object after qtest has run

We allocate the QFWCFG object previous to run the qtests,
free it once we are finished.

Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Split patch, fill commit description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

tests/libqos: Add pc_fw_cfg_uninit() and use it

The pc_fw_cfg_init() function allocates an IO QFWCFG object.
Add the pc_fw_cfg_uninit() function to deallocate it (and use it).

Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Split patch, fill commit description, call uninit in malloc-pc.c]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

tests/libqos: Add io_fw_cfg_uninit() and mm_fw_cfg_uninit()

The mm_fw_cfg_init() allocates a QFWCFG object,
add mm_fw_cfg_uninit() to deallocate it.
Similarly with io_fw_cfg_init(), add io_fw_cfg_uninit().

Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
[PMD: Split patch, filled commit description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

hw/sparc64: Implement fw_cfg_arch_key_name()

Implement fw_cfg_arch_key_name(), which returns the name of a
sparc64-specific key.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-8-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/sparc: Implement fw_cfg_arch_key_name()

Implement fw_cfg_arch_key_name(), which returns the name of a
sparc32-specific key.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-7-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/ppc: Implement fw_cfg_arch_key_name()

Implement fw_cfg_arch_key_name(), which returns the name of a
ppc-specific key.

The fw_cfg device is used by the machine using OpenBIOS:
- 40p
- mac99 (oldworld)
- g3beige (newworld)

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-6-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/i386: Implement fw_cfg_arch_key_name()

Implement fw_cfg_arch_key_name(), which returns the name of a
i386-specific key.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-5-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/i386: Extract fw_cfg definitions to local "fw_cfg.h"

Extract the architecture-specific fw_cfg definitions to "fw_cfg.h".

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/nvram/fw_cfg: Add fw_cfg_arch_key_name()

Add fw_cfg_arch_key_name() which returns the name of
an architecture-specific key.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/nvram/fw_cfg: Add trace events

Add trace events to dump the key content.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-2-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging

Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.

Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
# gpg: Signature made Wed 22 May 2019 19:36:43 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-rng-20190522: (25 commits)
  target/i386: Implement CPUID_EXT_RDRAND
  target/ppc: Use qemu_guest_getrandom for DARN
  target/ppc: Use gen_io_start/end around DARN
  target/arm: Implement ARMv8.5-RNG
  target/arm: Put all PAC keys into a structure
  hw/misc/exynos4210_rng: Use qemu_guest_getrandom
  hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail
  hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail
  aspeed/scu: Use qemu_guest_getrandom_nofail
  linux-user: Remove srand call
  linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys
  linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM
  linux-user: Call qcrypto_init if not using -seed
  linux-user: Initialize pseudo-random seeds for all guest cpus
  cpus: Initialize pseudo-random seeds for all guest cpus
  util: Add qemu_guest_getrandom and associated routines
  ui/vnc: Use gcrypto_random_bytes for start_auth_vnc
  ui/vnc: Split out authentication_failed
  crypto: Change the qcrypto_random_bytes buffer type to void*
  crypto: Use getrandom for qcrypto_random_bytes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

typo fixes, TYPE_XXX usage cleanup, comments update,
virtio-mmio trace functions cleanup

# gpg: Signature made Wed 22 May 2019 17:06:56 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  pci: msix: move 'MSIX_CAP_LENGTH' to header file
  vfio: platform: fix a typo
  hw: vfio: drop TYPE_FOO MACRO in VMStateDescription
  vfio: pci: make "vfio-pci-nohotplug" as MACRO
  configure: Fix spelling of sdl-image in --help
  migration: Fix typo in migrate_add_blocker() error message
  roms: List and describe the Makefile 'clean' rule
  roms: Correct the EDK2_BASETOOLS_OPTFLAGS variable description
  hw/virtio/virtio-mmio: Convert DPRINTF to trace and log

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-05-22' into staging

Miscellaneous patches for 2019-05-22

# gpg: Signature made Wed 22 May 2019 14:41:08 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-05-22:
  cutils: Simplify how parse_uint() checks for whitespace
  gdbstub: Fix misuse of isxdigit()
  gdbstub: Reject invalid RLE repeat counts
  tests/vhost-user-bridge: Fix misuse of isdigit()
  qemu-bridge-helper: Fix misuse of isspace()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/input-20190522-pull-request' into staging

input: add vhost-user-input to contrib.

# gpg: Signature made Wed 22 May 2019 09:26:34 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/input-20190522-pull-request:
  contrib: add vhost-user-input
  libvhost-user: fix -Werror=format= on ppc64
  libvhost-user: fix cast warnings on 32 bits

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store

This instruction raises #GP, aka SIGSEGV, if the effective address
is not aligned to 16-bytes.

We have assertions in tcg-op-gvec.c that the offset from ENV is
aligned, for vector types <= V128.  But the offset itself does not
validate that the final pointer is aligned -- one must also remember
to use the QEMU_ALIGNED() attribute on the vector member within ENV.

PowerPC Altivec has vector load/store instructions that silently
discard the low 4 bits of the address, making alignment mistakes
difficult to discover.  Aid that by making the most popular host
visibly signal the error.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Allow immediates for vector ORR and BIC

The allows immediates to be used for ORR and BIC,
as well as the trivial inversions, ORC and AND.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Build vector immediates with two insns

Use MOVI+ORR or MVNI+BIC in order to build some vector constants,
as opposed to dropping them to the constant pool.  This includes
all 16-bit constants and a similar set of 32-bit constants.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Use MVNI in tcg_out_dupi_vec

The compliment of a subset of immediates can be computed
with a single instruction.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Split up is_fimm

There are several sub-classes of vector immediate, and only MOVI
can use them all.  This will enable usage of MVNI and ORRI, which
use progressively fewer sub-classes.

This patch adds no new functionality, merely splits the function
and moves part of the logic into tcg_out_dupi_vec.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Support vector bitwise select value

The instruction set has 3 insns that perform the same operation,
only varying in which operand must overlap the destination.  We
can represent the operation without overlap and choose based on
the operands seen.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Use umin/umax in expanding unsigned compare

Using umin(a, b) == a as an expansion for TCG_COND_LEU is a
better alternative to (a - INT_MIN) <= (b - INT_MIN).

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Remove expansion for missing minmax

This is now handled by code within tcg-op-vec.c.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Support vector comparison select value

We already had backend support for this feature.  Expand the new
cmpsel opcode using vpblendb.  The combination allows us to avoid
an extra NOT for some comparison codes.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add TCG_OPF_NOT_PRESENT if TCG_TARGET_HAS_foo is negative

If INDEX_op_foo is always expanded by tcg_expand_vec_op, then
there may be no reasonable set of constraints to return from
tcg_target_op_def for that opcode.

Let TCG_TARGET_HAS_foo be specified as -1 in that case.  Thus a
boolean test for TCG_TARGET_HAS_foo is true, but we will not
assert within process_op_defs when no constraints are specified.

Compare this with tcg_can_emit_vec_op, which already uses this
tri-state indication.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Expand vector minmax using cmp+cmpsel

Provide a generic fallback for the min/max operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce do_op3_nofail for vector expansion

This makes do_op3 match do_op2 in allowing for failure,
and thus fall back expansions.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add support for vector compare select

Perform a per-element conditional move.  This combination operation is
easier to implement on some host vector units than plain cmp+bitsel.
Omit the usual gvec interface, as this is intended to be used by
target-specific gvec expansion call-backs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add support for vector bitwise select

This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units.  Include gvec expanders.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Fix missing checks and clears in tcg_gen_gvec_dup_mem

The paths through tcg_gen_dup_mem_vec and through MO_128 were
missing the check_size_align.  The path through MO_128 was also
missing the expand_clr.  This last was not visible because the
only user is ARM SVE, which would set oprsz == maxsz, and not
require the clear.

Fix by adding the check_size_align and using do_dup directly
instead of duplicating the check in tcg_gen_gvec_dup_{i32,i64}.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Fix dupi/dupm for avx1 and 32-bit hosts

The VBROADCASTSD instruction only allows %ymm registers as destination.
Rather than forcing VEX.L and writing to the entire 256-bit register,
revert to using MOVDDUP with an %xmm register.  This is sufficient for
an avx1 host since we do not support TCG_TYPE_V256 for that case.

Also fix the 32-bit avx2, which should have used VPBROADCASTW.

Fixes: 1e262b49b533
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Implement CPUID_EXT_RDRAND

We now have an interface for guest visible random numbers.

Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use qemu_guest_getrandom for DARN

We now have an interface for guest visible random numbers.

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use gen_io_start/end around DARN

Generating a random number counts as I/O, as it cannot be
replayed and produce the same results.

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement ARMv8.5-RNG

Use the newly introduced infrastructure for guest random numbers.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Put all PAC keys into a structure

This allows us to use a single syscall to initialize them all.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/misc/exynos4210_rng: Use qemu_guest_getrandom

The random number is intended for use by the guest.  As such, we should
honor the -seed argument for reproducibility.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail

The random number is intended for use by the guest.  As such, we should
honor the -seed argument for reproducibility.  Use the *_nofail routine
instead of rolling our own error handling locally.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail

The random number is intended for use by the guest.  As such, we should
honor the -seed argument for reproducibility.  Use the *_nofail routine
instead of error_abort directly.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

aspeed/scu: Use qemu_guest_getrandom_nofail

The random number is intended for use by the guest.  As such, we should
honor the -seed argument for reproducibility.  Use the *_nofail routine
instead of rolling our own error handling locally.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Remove srand call

We no longer use rand() within linux-user.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys

Use a better interface for random numbers than rand() * 3.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM

Use a better interface for random numbers than rand * 16.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Call qcrypto_init if not using -seed

When not using -seed, we will use the crypto subsystem
for random numbers.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Initialize pseudo-random seeds for all guest cpus

When the -seed option is given, call qemu_guest_random_seed_main,
putting the subsystem into deterministic mode.  Pass derived seeds
to each cpu created during clone; which is a no-op unless the
subsystem is in deterministic mode.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpus: Initialize pseudo-random seeds for all guest cpus

When the -seed option is given, call qemu_guest_random_seed_main,
putting the subsystem into deterministic mode.  Pass derived seeds
to each cpu created; which is a no-op unless the subsystem is in
deterministic mode.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util: Add qemu_guest_getrandom and associated routines

This routine is intended to produce high-quality random numbers to the
guest.  Normally, such numbers are crypto quality from the host, but a
command-line option can force the use of a fully deterministic sequence
for use while debugging.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

ui/vnc: Use gcrypto_random_bytes for start_auth_vnc

Use a better interface for random numbers than rand().
Fail gracefully if for some reason we cannot use the crypto system.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

ui/vnc: Split out authentication_failed

There were 3 copies of this code, one of which used the wrong
data size for the failure indicator.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Change the qcrypto_random_bytes buffer type to void*

Using uint8_t* merely requires useless casts for use with
other types to be filled with randomness.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Use getrandom for qcrypto_random_bytes

Prefer it to direct use of /dev/urandom.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Use O_CLOEXEC in qcrypto_random_init

Avoids leaking the /dev/urandom fd into any child processes.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Do not fail for EINTR during qcrypto_random_bytes

We can always get EINTR for read; /dev/urandom is no exception.

Rearrange the order of tests for likelihood; allow degenerate buflen==0
case to perform a no-op zero-length read.  This means that the normal
success path is a straight line with a single test for success.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

crypto: Reverse code blocks in random-platform.c

Use #ifdef _WIN32 instead of #ifndef _WIN32.
This will make other tests easier to sequence.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

build: Link user-only with crypto random number objects

For user-only, we require only the random number bits of the
crypto subsystem.  Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.

Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

configure: Link test before auto-enabling crypto libraries

At least ubuntu 18.04 does not package static gnutls libraries.
At least Fedora 30 does not ship static nettle and gcrypt libraries.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190510012458.22706-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

pci: msix: move 'MSIX_CAP_LENGTH' to header file

'MSIX_CAP_LENGTH' is defined in two .c file. Move it
to hw/pci/msix.h file to reduce duplicated code.

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-5-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

vfio: platform: fix a typo

'eventd' should be 'eventfd'.

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-4-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw: vfio: drop TYPE_FOO MACRO in VMStateDescription

It's recommended that VMStateDescription names are decoupled from QOM
type names as the latter may freely change without consideration of
migration compatibility.

Link: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg02175.html
CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-3-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

vfio: pci: make "vfio-pci-nohotplug" as MACRO

The QOMConventions recommends we should use TYPE_FOO
for a TypeInfo's name. Though "vfio-pci-nohotplug" is not
used in other parts, for consistency we should make this change.

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-2-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

configure: Fix spelling of sdl-image in --help

Fixes: a442fe2f2b2f20e7be0934277e9400b844b11999
Cc: qemu-trivial@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190517183246.11933-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

migration: Fix typo in migrate_add_blocker() error message

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <155800428514.543845.17558475870097990036.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

roms: List and describe the Makefile 'clean' rule

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190506141923.12183-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

roms: Correct the EDK2_BASETOOLS_OPTFLAGS variable description

In commit 1cab464136b4 we incorrectly described the
EDK2_BASETOOLS_OPTFLAGS can pass CPPFLAGS and CFLAGS
options to the EDK2 build tools, but it only expands
the CFLAGS (not to the CPPFLAGS).
Update the description to be more accurate.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190506141923.12183-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/virtio/virtio-mmio: Convert DPRINTF to trace and log

Use traces for debug message and qemu_log_mask for errors.

Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190503154424.73933-1-liboxuan@connect.hku.hk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

cutils: Simplify how parse_uint() checks for whitespace

Use qemu_isspace() so we don't have to cast to unsigned char.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190514180311.16028-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

gdbstub: Fix misuse of isxdigit()

gdb_read_byte() passes its @ch argument to isxdigit().  Undefined
behavior when the value is negative.  Two callers:

* gdb_chr_receive() passes an uint8_t value.  Safe.

* gdb_handlesig() a char value.  Unsafe.  Not a security issue,
  because the characters come from the gdb client, which is trusted.

The obvious fix would be casting @ch to unsigned char.  But note that
gdb_read_byte() already casts @ch to uint8_t in many places.  Uses of
@ch without such a cast:

(1) Compare to a character constant with == or !=

(2) s->linesum += ch

(3) Store ch or ch ^ 0x20 into s->line_buf[]

(4) Check for invalid RLE count:
    ch < ' ' || ch == '#' || ch == '$' || ch > 126

(5) Pass to isxdigit()

(6) Pass to fromhex()

Change the parameter type from int to uint8_t, and drop the now
redundant casts.  Affects the above uses as follows:

(1) No change: the character constants are all non-negative.

(2) Effectively no change: we only ever use s->linesum & 0xff, and
    s->linesum is int.

(3) No change: s->line_buf[] is char[].

(4) No change.

(5) Avoid undefined behavior.

(6) No change: only reached when isxdigit(ch)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190514180311.16028-5-armbru@redhat.com>

gdbstub: Reject invalid RLE repeat counts

"Debugging with GDB / Appendix E GDB Remote Serial Protocol /
Overview" specifies "The printable characters '#' and '$' or with a
numeric value greater than 126 must not be used."  gdb_read_byte()
only rejects values < 32.  This is wrong.  Impact depends on the caller:

* gdb_handlesig() passes a char.  Incorrectly accepts '#', '$' and
  '\127'.

* gdb_chr_receive() passes an uint8_t.  Additionally accepts
  characters with the most-significant bit set.

Correct the validity check to match the specification.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190514180311.16028-4-armbru@redhat.com>

tests/vhost-user-bridge: Fix misuse of isdigit()

vubr_set_host() passes char values to isdigit().  Undefined behavior
when the value is negative.

Fix by using qemu_isdigit() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190514180311.16028-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[Missing #include "qemu-common.h" fixed]

qemu-bridge-helper: Fix misuse of isspace()

parse_acl_file() passes char values to isspace().  Undefined behavior
when the value is negative.  Not a security issue, because the
characters come from trusted $prefix/etc/qemu/bridge.conf and the
files it includes.

Furthermore, isspace()'s locale-dependence means qemu-bridge-helper
uses the user's locale for parsing $prefix/etc/bridge.conf.  Feels
wrong.

Use g_ascii_isspace() instead.  This fixes the undefined behavior, and
makes parsing of $prefix/etc/bridge.conf locale-independent.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190514180311.16028-2-armbru@redhat.com>

contrib: add vhost-user-input

Add a vhost-user input backend example, based on virtio-input-host
device. It takes an evdev path as argument, and can be associated with
a vhost-user-input device via a UNIX socket:

$ vhost-user-input -p /dev/input/eventX -s /tmp/vui.sock

$ qemu ... -chardev socket,id=vuic,path=/tmp/vui.sock
  -device vhost-user-input-pci,chardev=vuic

This example is intentionally not included in $TOOLS, and not
installed by default.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190514104126.6294-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

libvhost-user: fix -Werror=format= on ppc64

That should fix the following warning:

/home/pm215/qemu/contrib/libvhost-user/libvhost-user.c: In function
‘vu_set_mem_table_exec_postcopy’:
/home/pm215/qemu/contrib/libvhost-user/libvhost-user.c:666:9: error:
format ‘%llx’ expects argument of type ‘long long unsigned int’, but
argument 5 has type ‘__u64’ [-Werror=format=]
         DPRINT("%s: region %d: Registered userfault for %llx + %llx\n",
         ^
/home/pm215/qemu/contrib/libvhost-user/libvhost-user.c:666:9: error:
format ‘%llx’ expects argument of type ‘long long unsigned int’, but
argument 6 has type ‘__u64’ [-Werror=format=]
cc1: all warnings being treated as errors

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190514104126.6294-3-marcandre.lureau@redhat.com

{ kraxel: s/PRIu64/PRIx64/ ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

libvhost-user: fix cast warnings on 32 bits

Fixes warnings:
 warning: cast to pointer from integer of different size
 [-Wint-to-pointer-cast]

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190514104126.6294-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 MDS feature flags

md-clear and mds-no feature flags, for detection and mitigation
of MDS vulnerabilities (CVE-2018-12126, CVE-2018-12127,
CVE-2018-12130, CVE-2019-11091).

# gpg: Signature made Tue 21 May 2019 19:42:43 BST
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  target/i386: add MDS-NO feature
  docs: recommend use of md-clear feature on all Intel CPUs
  target/i386: define md-clear bit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/i386: add MDS-NO feature

Microarchitectural Data Sampling is a hardware vulnerability which allows
unprivileged speculative access to data which is available in various CPU
internal buffers.

Some Intel processors use the ARCH_CAP_MDS_NO bit in the
IA32_ARCH_CAPABILITIES
MSR to report that they are not vulnerable, make it available to guests.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190516185320.28340-1-pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

docs: recommend use of md-clear feature on all Intel CPUs

Update x86 CPU model guidance to recommend that the md-clear feature is
manually enabled with all Intel CPU models, when supported by the host
microcode.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190515141011.5315-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

target/i386: define md-clear bit

md-clear is a new CPUID bit which is set when microcode provides the
mechanism to invoke a flush of various exploitable CPU buffers by invoking
the VERW instruction.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190515141011.5315-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>