Merge tag 'sunxi-dt-for-5.19-2' of git://git./linux/kernel/git/sunxi/linux into arm/dt

- F1C100 improvements (SPI, MMC, timer, cpu, watchdog)
- SPI flash node for licheepi-nano
- enabled analogue audio on olinuxino-a64
- GPIO port regulators on teres-i
- remove undocumented property from nanopi

* tag 'sunxi-dt-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sunxi: nanopi: Remove input-name property

Link: https://lore.kernel.org/r/Yngton59OacOR2ht@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.19' of git://git./linux/kernel/git/shawnguo/linux into arm/dt

i.MX dt-bindings update for 5.19:

- Various board compatible additions to fsl.yaml.
- Update fsl-imx-dma bindings to deprecate '#dma-channels' and
  '#dma-requests'.
- Add bindings for i.MX8MP HDMI and media block control.
- Add vendor prefix for Storopack.

* tag 'imx-bindings-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: Add bosch acc board
  dt-bindings: arm: fsl: Add Storopack i.MX7D SMEGW01 board
  dt-bindings: vendor-prefixes: Add prefix for Storopack
  dt-bindings: dmaengine: fsl-imx: deprecate '#dma-channels' and '#dma-requests'
  dt-bindings: arm: fsl: add toradex,colibri-imx6ull
  dt-bindings: arm: fsl: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
  dt-bindings: arm: fsl: add ls1021a-iot board
  dt-bindings: arm: Add i.MX8M Mini Toradex Verdin based Menlo board
  dt-bindings: arm: Add i.MX8M Plus Gateworks GW74xx board
  dt-bindings: arm: fsl: add IMX8MN DDR3L eval board
  dt-bindings: arm: fsl: Add carriers for toradex,colibri-imx6dl
  dt-bindings: arm: fsl: imx6dl-colibri: Drop dedicated v1.1 bindings
  dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.
  dt-bindings: arm: Add i.MX53 based Menlo board comment
  dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL
  dt-bindings: arm: fsl: add TQ Systems boards based on i.MX6UL(L)
  dt-bindings: arm: Add Data Modul i.MX8M Mini eDM SBC
  dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl
  dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
  dt-bindings: soc: Add i.MX8MP media block control DT bindings

Link: https://lore.kernel.org/r/20220508033843.2773685-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-dt-for-v5.19' of git://git./linux/kernel/git/ti/linux into arm/dt

TI K3 device tree updates for v5.19

New Features:
J721e:
* Enable DSS, DP, HDMI on J721e EVM and SK
AM62:
* MCAN, MCU GPIO, ECAP APWM, DMA, Etherent and several peripheral on AM62 SK EVM
AM64:
* Enable Wireless LAN support

Fixes:
Drop incorrect MCU UART clock rates

* tag 'ti-k3-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: dts: ti: k3-j721e-sk: Enable HDMI
  arm64: dts: ti: k3-j721e-sk: Enable DisplayPort
  arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm
  arm64: dts: ti: k3-j721e-*: add DP & DP PHY
  arm64: dts: ti: k3-am62: Add SA3UL ranges in cbass_main
  arm64: dts: ti: k3-am62: Add support for MCAN
  arm64: dts: ti: k3-am62-mcu: Enable MCU GPIO module
  arm64: dts: ti: k3-am625-sk: Add ECAP APWM nodes
  arm64: dts: ti: k3-am625-sk: Enable on board peripherals
  arm64: dts: ti: k3-am62: Add more peripheral nodes
  arm64: dts: ti: k3-am642-sk: Enable WLAN connected to SDHCI0
  arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates

Link: https://lore.kernel.org/r/3dc2011b-eb6d-dcd5-3921-57f6a1cf6d8e@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-keystone-dt-for-v5.19' of git://git./linux/kernel/git/ti/linux into arm/dt

Keystone2 device tree updates for v5.19

* Cleanups for SPI NOR / flash

* tag 'ti-keystone-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  ARM: dts: keystone: Fix missing fallback and case in SPI NOR node compatible
  ARM: dts: keystone: Align SPI NOR node name with dtschema

Link: https://lore.kernel.org/r/20220507163435.tcg46cacwqhe7n64@busily
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: sunxi: nanopi: Remove input-name property

This property doesn't seem to exist in the documentation nor
in source code, but for some reason it is defined in a bunch
of device trees.

Signed-off-by: Dang Huynh <danct12@riseup.net>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220425064231.243482-1-danct12@riseup.net

Merge tag 'sunxi-dt-for-5.19-1' of git://git./linux/kernel/git/sunxi/linux into arm/dt

- F1C100 improvements (SPI, MMC, timer, cpu, watchdog)
- SPI flash node for licheepi-nano
- enabled analogue audio on olinuxino-a64
- GPIO port regulators on teres-i

* tag 'sunxi-dt-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: teres-i: Add GPIO port regulators
  arm64: dts: allwinner: a64: olinuxino: Enable audio
  ARM: dts: suniv: licheepi-nano: add SPI flash
  ARM: dts: suniv: F1C100: add SPI support
  dt-bindings: spi: sunxi: document F1C100 controllers
  ARM: dts: suniv: licheepi-nano: add microSD card
  ARM: dts: suniv: F1C100: add MMC controllers
  ARM: dts: suniv: F1C100: fix timer node
  ARM: dts: suniv: F1C100: fix CPU node
  ARM: dts: suniv: F1C100: add clock and reset macros
  dt-bindings: arm: sunxi: document LicheePi Nano name
  ARM: dts: suniv: F1C100: fix watchdog compatible
  dt-bindings: watchdog: sunxi: clarify clock support
  dt-bindings: watchdog: sunxi: fix F1C100s compatible

Link: https://lore.kernel.org/r/YnVUmSLE1MZFkApt@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.19-arm64-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.19-rc1

This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the
SDMMC clock speed on Tegra194 and adds the ASRC audio block on various
chip generations. Memory controller channels are also added on Tegra186
and later and the missing DFLL reset is added for Tegra210.

* tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Add missing DFLL reset on Tegra210
  arm64: tegra: Add memory controller channels
  arm64: tegra: Enable ASRC on various platforms
  arm64: tegra: Add ASRC device on Tegra186 and later
  arm64: tegra: Update PWM fan node name
  arm64: tegra: Add node for Tegra234 CCPLEX cluster
  arm64: tegra: Add QSPI controllers on Tegra234
  arm64: tegra: Update SDMMC1/3 clock source for Tegra194

Link: https://lore.kernel.org/r/20220506143005.3916655-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.19-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.19-rc1

Updates the memory controller bindings to properly validate the number
of entries in the reg and reg-names properties.

* tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: memory: tegra: Update validation for reg and reg-names

Link: https://lore.kernel.org/r/20220506143005.3916655-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-bindings-for-v5.19-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.19 (take two)

  - Document support for the R-Car V4H SoC and the White Hawk
    development board stack,
  - Document support for the RZ/V2M SoC and the RZ/V2M Evaluation Kit
    Board,
  - Document SPI Multi I/O Bus Controller (RPC-IF) support for RZ/G2UL,
  - Miscellaneous fixes and improvements.

* tag 'renesas-dt-bindings-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: soc: renesas: Move renesas,rzg2l-sysc from arm to soc
  dt-bindings: memory: renesas,rpc-if: Document RZ/G2UL SoC
  dt-bindings: arm: renesas: Document Renesas RZ/V2M SoC and EVK board
  dt-bindings: power: renesas,rcar-sysc: Document r8a779g0 SYSC bindings
  dt-bindings: reset: renesas,rst: Document r8a779g0 reset module
  dt-bindings: arm: renesas: Document R-Car V4H White Hawk DT bindings

Link: https://lore.kernel.org/r/cover.1651828616.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.19-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.19 (take two)

  - I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and
    thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
    development board,
  - Initial support for the R-Car V4H SoC and the Renesas White Hawk
    development board stack,
  - DMA, RTC, and USB support for the RZ/N1D SoC,
  - Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit
    Board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits)
  arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
  arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
  arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
  ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY
  ARM: dts: r9a06g032: Add USB PHY DT support
  ARM: dts: r9a06g032: Add internal PCI bridge node
  ARM: dts: r9a06g032: Describe the RTC
  arm64: dts: renesas: Add interrupt-names to CANFD nodes
  arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node
  arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
  arm64: dts: renesas: r9a07g043: Add TSU node
  arm64: dts: renesas: r9a07g043: Add OPP table
  arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes
  arm64: dts: renesas: r9a07g054: Fix external clk node names
  arm64: dts: renesas: r9a07g044: Fix external clk node names
  ARM: dts: r9a06g032: Fix the NAND controller node
  ARM: dts: r9a06g032: Fill the UART DMA properties
  ARM: dts: r9a06g032: Describe the DMA router
  ARM: dts: r9a06g032: Add the two DMA nodes
  arm64: dts: renesas: Remove empty rgb output endpoints
  ...

Link: https://lore.kernel.org/r/cover.1651828603.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-5.19-2' of git://git./linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.19, part two

1. Cleanups: unused and undocumented dma-channels and dma-requests.
2. Add clock controllers to ExynosAutov9.

* tag 'samsung-dt64-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: switch UFS clock node in ExynosAutov9
  arm64: dts: exynos: switch USI clocks in ExynosAutov9
  arm64: dts: exynos: add initial CMU clock nodes in ExynosAutov9
  dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
  dt-bindings: clock: add clock binding definitions for Exynos Auto v9
  arm64: dts: fsd: drop useless 'dma-channels/requests' properties
  arm64: dts: exynos: drop useless 'dma-channels/requests' properties
  arm64: dts: exynos: move XTCXO clock frequency to board in Exynos Auto v9

Link: https://lore.kernel.org/r/20220506081438.149192-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-5.19-2' of git://git./linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.19, part two

1. Cleanups: unused and undocumented dma-channels and dma-requests.
2. Correct compatible of Samsung EEPROM on S5PV210.

* tag 'samsung-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: drop useless 'dma-channels/requests' properties
  ARM: dts: s5pv210: drop useless 'dma-channels/requests' properties
  ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM

Link: https://lore.kernel.org/r/20220506081438.149192-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'dt-cleanup-5.19-2' of git://git./linux/kernel/git/krzk/linux into arm/dt

Minor cleanup of ARM DTS for v5.19, part two

Align SPI NOR node names to DT schema and drop unused/undocumented
dma-channels/dma-requests.

* tag 'dt-cleanup-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: socfpga: drop useless 'dma-channels/requests' properties
  ARM: dts: zynq-7000: drop useless 'dma-channels/requests' properties
  ARM: dts: marvell: align SPI NOR node name with dtschema
  ARM: dts: omap: align SPI NOR node name with dtschema
  ARM: dts: nuvoton: align SPI NOR node name with dtschema

Link: https://lore.kernel.org/r/20220506081438.149192-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'dt64-cleanup-5.19' of git://git./linux/kernel/git/krzk/linux into arm/dt

Minor cleanup of ARM64 DTS for v5.19

Align SPI NOR node names and freq-table-hz to DT schema. Drop
unused/undocumented dma-channels/dma-requests.

* tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: broadcom: drop useless 'dma-channels/requests' properties
  arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties
  arm64: dts: marvell: align SPI NOR node name with dtschema
  arm64: dts: microchip: align SPI NOR node name with dtschema
  arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS

Link: https://lore.kernel.org/r/20220506081438.149192-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

dt-bindings: arm: Add bosch acc board

Add device tree binding for the Bosch ACC board, based on i.MX6 Dual.

Signed-off-by: Philip Oberfichtner <pro@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arm64: dts: renesas: Add initial device tree for RZ/V2M EVK

Add basic support for RZ/V2M EVK (based on R9A09G011):
- memory
- External input clock
- UART

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220503115557.53370-13-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC

Details of the SoC can be found here:
https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-cortex-a-mpus/rzv2m-dual-cortex-a53-lpddr4x32bit-ai-accelerator-isp-4k-video-codec-4k-camera-input-fhd-display-output

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220504094456.24386-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'renesas-r9a09g011-dt-binding-defs-tag' into renesas-arm-dt-for-v5.19

Renesas RZ/V2M DT Binding Definitions

Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by
driver and DT source files.

arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values

Despite the name, R-Car V3U is the first member of the R-Car Gen4
family.  Hence update the compatible properties in various device nodes
to include family-specific compatible values for R-Car Gen4 instead of
R-Car Gen3:
  - DMAC,
  - (H)SCIF,
  - I2C,
  - IPMMU,
  - WDT.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/73cea9d5e1a6639422c67e4df4285042e31c9fd5.1651497071.git.geert+renesas@glider.be

ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY

Describe the PCI USB devices that are behind the PCI bridge, adding
necessary links to the USB PHY device.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220429134143.628428-8-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: r9a06g032: Add USB PHY DT support

Define the r9a06g032 generic part of the USB PHY device node.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220429134143.628428-7-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: r9a06g032: Add internal PCI bridge node

Add the device node for the r9a06g032 internal PCI bridge device.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220429134143.628428-6-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: r9a06g032: Describe the RTC

Describe the SoC RTC which counts time and provides alarm support.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220429104602.368055-7-miquel.raynal@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: Add interrupt-names to CANFD nodes

The Renesas R-Car CAN-FD Controller on R-Car Gen3 and RZ/G2 SoCs has two
interrupts.  Add interrupt-names properties to all CAN-FD device nodes
to identify the individual interrupts, so we can make this property a
required property in the DT bindings.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/10eef1e20372af4a156b06df8e5124666ec7c6b6.1651512451.git.geert+renesas@glider.be

arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node

Add SPI Multi I/O Bus controller node to R9A07G043 (RZ/G2UL) SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220502190155.84496-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA

Setup a thermal zone driven by SoC temperature sensor.
Create passive trip points and bind them to CPUFreq cooling
device that supports power extension.

Based on the work done by Dien Pham <dien.pham.ry@renesas.com>
and others for r8a77990 SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220501112926.47024-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: r9a07g043: Add TSU node

Add TSU node to RZ/G2UL SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220501112926.47024-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: r9a07g043: Add OPP table

Add OPP table for RZ/G2UL SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220501112926.47024-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes

Add RSPI{0,1,2} nodes to R9A07G043 (RZ/G2UL) SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220501112926.47024-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: r9a07g054: Fix external clk node names

Add suffix '-clk' for can and extal clk node names and replace the
clk node names audio_clk{1,2} with audio{1,2}-clk as per the device
tree specification.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220428133156.18080-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: r9a07g044: Fix external clk node names

Add suffix '-clk' for can and extal clk node names and replace the
clk node names audio_clk{1,2} with audio{1,2}-clk as per the device
tree specification.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220428133156.18080-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: r9a06g032: Fix the NAND controller node

Add the missing power-domains property which is mandatory.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220429105229.368728-3-miquel.raynal@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: r9a06g032: Fill the UART DMA properties

UART 0 to 2 do not have DMA support, while UART 3 to 7 do.

Fill the "dmas" and "dma-names" properties for each of these nodes.

Please mind that these nodes go through the dmamux node which will
redirect the requests to the right DMA controller. The first 4 cells of
the "dmas" properties will be transferred as-is to the DMA
controllers. The last 2 cells are consumed by the dmamux. Which means
cell 0 and 4 are almost redundant, one giving the controller request ID
and the other the dmamux channel which is a 1:1 translation of the
request IDs, shifted by 16 when pointing to the second DMA controller.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220421095323.101811-11-miquel.raynal@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: r9a06g032: Describe the DMA router

There is a dmamux on this SoC which allows picking two different sources
for a single DMA request.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220427095653.91804-10-miquel.raynal@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

ARM: dts: r9a06g032: Add the two DMA nodes

Describe the two DMA controllers available on this SoC.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220427095653.91804-9-miquel.raynal@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: Remove empty rgb output endpoints

Endpoints node must have a remote-endpoint property, as endpoints only
exist to model a link between ports. Drop the empty rgb output endpoints
from SoC dtsi files, and declare them in the board dts instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220424161228.8147-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: Remove empty lvds endpoints

Endpoints node must have a remote-endpoint property, as endpoints only
exist to model a link between ports. Drop the empty lvds endpoints from
SoC dtsi files, they should be instead declared in the board dts or in
overlays.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220424161228.8147-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: rzg2ul-smarc: Enable USB2.0 support

Enable USB2.0 Host/Device support on RZ/G2UL SMARC EVK by
adding usb{0,1} pincontrol entries to the soc-pinctrl dtsi
and deleting the nodes which disabled it.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220429072400.23729-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: rzg2ul-smarc: Enable Audio

Enable Audio on RZ/G2UL SMARC EVK by adding ssi1 pincontrol entries
to the soc-pinctrl dtsi and ssi1 and cpu sound_dai nodes to the board
dtsi.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220429072400.23729-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: rzg2l-smarc: Move ssi0 and cpu sound_dai nodes from common dtsi

On RZ/G2{L,LC} SoM module, the wm8978 audio codec is connected to ssi0,
whereas on RZ/G2UL it is connected to ssi1. So move ssi0 and cpu
sound_dai nodes from common dtsi to board specific dtsi.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220429072400.23729-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: Add Renesas White Hawk boards support

Initial support for the Renesas White Hawk CPU and BreakOut boards.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220428135058.597586-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: renesas: Add Renesas R8A779G0 SoC support

Add initial support for the Renesas R8A779G0 (R-Car V4H) SoC.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20220428135058.597586-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'omap-for-v5.19/dt-part2-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt

More devicetree changes for omaps

Devicetree updates for few boards and more clean-up for make dtbs warnings:

- Updates for am335x-myirtech oscillator and mtd

- Firmware configuration for i2c voltage scaling and IO isolation for am3/4
  that are wired for these features

- A series of omap3 clock node clean-up for make dtbs warnings for
  unique_unit_address and node_name_chars_strict

- Updates for dma-channel usage to add the generic dma-common properties

* tag 'omap-for-v5.19/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
  ARM: dts: dm81xx: use new 'dma-channels/requests' properties
  ARM: dts: am33xx: use new 'dma-channels/requests' properties
  ARM: dts: Group omap3 CM_CLKSEL1_EMU clocks
  ARM: dts: Group omap3 CM_CLKSEL_PER clocks
  ARM: dts: Group omap3 CM_ICLKEN_PER clocks
  ARM: dts: Group omap3 CM_FCLKEN_PER clocks
  ARM: dts: Group omap3 CM_FCLKEN_CAM clocks
  ARM: dts: Group omap3 CM_CLKSEL_DSS clocks
  ARM: dts: Group omap3 CM_FCLKEN_DSS clocks
  ARM: dts: Group omap3 CM_CLKOUT_CTRL clocks
  ARM: dts: Group omap3 CM_CLKSEL1_PLL clocks
  ARM: dts: Group omap3 CM_CLKSEL_WKUP clocks
  ARM: dts: Group omap3 CM_ICLKEN_WKUP clocks
  ARM: dts: Group omap3 CM_FCLKEN_WKUP clocks
  ARM: dts: Group omap3 CM_CLKSEL_CORE clocks
  ARM: dts: Group omap3 CM_ICLKEN3_CORE clocks
  ARM: dts: Group omap3 CM_ICLKEN1_CORE clocks
  ARM: dts: Group omap3 crypto accelerator clocks
  ARM: dts: Group omap3 CM_FCLKEN1_CORE clocks
  ARM: dts: Group omap3 CONTROL_DEVCONF1 clocks
  ...

Link: https://lore.kernel.org/r/pull-1651726643-535261@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.19/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SoCs changes for 5.19,
please pull the following:

- Krzysztof fixes the SPI NOR Device Tree node name to comply with the
  dtschema

* tag 'arm-soc/for-5.19/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: align SPI NOR node name with dtschema

Link: https://lore.kernel.org/r/20220504210942.1838248-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: ti: k3-j721e-sk: Enable HDMI

Add node for dvi bridge and the endpoint nodes to
describe connection from
DSS => TI TFP410 DPI-to-DVI Bridge => HDMI connector.
Also add the required pinmux for HDMI hotplug and
powerdown

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220505090709.9252-3-r-ravikumar@ti.com

arm64: dts: ti: k3-j721e-sk: Enable DisplayPort

Add the endpoint nodes to describe connection from
DSS => MHDP => DisplayPort connector.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220505090709.9252-2-r-ravikumar@ti.com

arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm

Add the endpoint nodes to describe connection from
DSS => MHDP => DisplayPort connector.
Also add the required pinmux nodes for hotplug.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220429112639.13004-3-r-ravikumar@ti.com

arm64: dts: ti: k3-j721e-*: add DP & DP PHY

Add DT nodes for DisplayPort and DisplayPort PHY. The DP is Cadence MHDP
8546 and the PHY is a Cadence Torrent PHY with TI WIZ wrapper.

Also add the required phy link nodes in the board dts files.

A slight irregularity in the bindings is the DPTX PHY register block,
which is in the MHDP IP, but is needed and mapped by the PHY.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220429112639.13004-2-r-ravikumar@ti.com

Merge tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.19, please pull the following:

- Oleksij fixes the ethernet node name for the USB Ethernet adapter on
  BCM283x (Raspberry Pi 1/2/3) platforms

- Kuldeep fixes the PL022 SPI controller clock names to conform to the
  binding

- Rafal updates the various BCM5301X (Northstar) Device Tree include
  files to be dtsschema conforming for pinctrl, NAND

- Arinc adds the Asus RT-AC88U binding, removes some unnecessary
  properties of the Ethernet switch DT node, populates the correct PHY
  interface for port 5 of the switch, adds support for fetching the MAC
  address from the NVMEM provider and finally disables gmac0 on that
  device which is unused

- Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio
  line names conforming to the printed circuit board layout

- Krzysztof updates various Broadcom DTS files to have a conforming SPI
  nor Device Tree node

- Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2
  wireless routers based on the BCM4708 SoC

- William adds support for the BCM47622 ARMv7 Broadband SoC and provides
  a basic DTS to boot upstream Linux on such a system

* tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
  ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
  ARM: dts: add dts files for bcmbca soc 47622
  dt-bindings: arm: add bcmbca device tree binding document
  ARM: dts: bcm283x: Align ETH_CLK GPIO line name
  ARM: dts: bcm283x: Remove gpio line name NC
  ARM: dts: bcm2835-rpi-b: Fix GPIO line names
  ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
  ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
  ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
  ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U
  ARM: dts: broadcom: align SPI NOR node name with dtschema
  dt-bindings: arm: bcm: add bindings for Asus RT-AC88U
  ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
  dt-bindings: arm: bcm: create new description for BCM53016
  dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings
  ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U
  ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U
  ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U
  ARM: dts: BCM5301X: Fix DTC warning for NAND node
  ARM: dts: BCM5301X: Update pin controller node name
  ...

Link: https://lore.kernel.org/r/20220504210942.1838248-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-updates-5.19' of git://git./linux/kernel/git/sudeep.holla/linux into arm/dt

Arm FVP/Juno device tree updates for v5.19

The main and bulk of the change is the addition of new platform
Arm corstone1000(both FVP and FPGA versions). Also, there are
addition of Coresight Cross Trigger Interface(CTI) support on Juno,
fix for incorrect SCMI power domain IDs, addition of virtio-rng
on FVP which is default disabled as it works only on latest versions
of the FVP model.

Other miscellanous changes include dropping of useless
'dma-channels/requests' properties and updating virtio device
node names as per dtschema.

* tag 'juno-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Drop useless 'dma-channels/requests' properties
  arm64: dts: fvp: Align virtio device node names with dtschema
  arm64: dts: fvp: Add virtio-rng support
  arm64: dts: Add Arm corstone1000 platform support
  dt-bindings: Add Arm corstone1000 platform
  arm64: dts: juno: add CTI entries to device tree
  arm64: dts: juno: Fix SCMI power domain IDs for ETF and CS funnel

Link: https://lore.kernel.org/r/20220504112917.3492009-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v5.19-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT for v5.19, round 1

Highlights:
----------

-MCU:
 -Fix pinctrl node names to match with pinctrl yaml.

- MPU:
 -General:
  - Fix pinctrl node names to match with pinctrl yaml.
  - Add Protonics boards support based on STM32MP151A SoC:
    - PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
               TI and Micrel 10BaseT Phys and wifi support.
    - PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
               and CO2 sensors.
    - PRTT1A - 10BaseT1L multi functional controller.

 - ST boards:
  - Add RTC support on stm32mp13.
  - Add button and heartbit support on stm32mp13 DK board.
  - Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
    on OP-TEE OS and SCMI protocol.

 - DH boards:
  - Use MCO2 to generate PHY clock and ETHRX clock in order to release
    internal PLL for a better SD card usage.
  - Add 1ms PHY post-reset on Avenger96 board to match with PHY
    requirements.

* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
  ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
  dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
  ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
  dt-bindings: reset: stm32mp15: rename RST_SCMI define
  dt-bindings: clock: stm32mp15: rename CK_SCMI define
  dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
  dt-bindings: rcc: Add optional external ethernet RX clock properties
  ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
  ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
  ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
  ARM: dts: stm32: add support for Protonic PRTT1x boards
  ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
  dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
  dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
  dt-bindings: arm: stm32: correct blank lines
  dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
  ARM: dts: stm32: enable RTC support on stm32mp135f-dk
  ARM: dts: stm32: add RTC node on stm32mp131
  ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
  ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
  ...

Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

dt-bindings: arm: fsl: Add Storopack i.MX7D SMEGW01 board

Add DT compatible string for Storopack i.MX7D SMEGW01 board.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: vendor-prefixes: Add prefix for Storopack

Add a vendor prefix entry for Storopack (https://www.storopack.com).

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: clock: Add r9a09g011 CPG Clock Definitions

Define RZ/V2M (R9A09G011) Clock Pulse Generator module clock outputs
(CPG_CLK_ON* registers), and reset definitions (CPG_RST_* registers)
in Section 48.5 ("Register Description") of the RZ/V2M Hardware User's
Manual (Rev. 1.10, Sep. 2021).

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220503115557.53370-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: soc: renesas: Move renesas,rzg2l-sysc from arm to soc

The Renesas RZ/{G2L,V2L} System Controller (SYSC) DT binding is not
really a power-related DT binding, hence it does not belong under
Documentation/devicetree/bindings/power/.
Move it to Documentation/devicetree/bindings/soc/renesas/.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/a47015888f99476a5206a556dce93503494d9a73.1651495078.git.geert+renesas@glider.be

dt-bindings: memory: renesas,rpc-if: Document RZ/G2UL SoC

Document RZ/G2UL RPC-IF bindings. RZ/G2UL RPC-IF is identical to one found
on the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-rpc-if" will be used as a fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220501082508.25511-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arm64: dts: exynos: switch UFS clock node in ExynosAutov9

Use cmu_fsys's clock node instead of dummy UFS clock node.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-13-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

arm64: dts: exynos: switch USI clocks in ExynosAutov9

Use CMU clock nodes instead of dummy fixed-rate-clock.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-12-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

arm64: dts: exynos: add initial CMU clock nodes in ExynosAutov9

Add cmu_top, cmu_busmc, cmu_core, cmu_fsys and peric0/c1/s clock nodes.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-11-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Merge tag 'samsung-dt-bindings-clk-exynosautov9-5.19' into next/dt64

dt-bindings for Samsung ExynosAutov9 clock controllers for v5.19

The Devicetree bindings for Samsung ExynosAutov9 clock controllers.

dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings

Add dt-schema for Exynos Auto v9 SoC clock controller.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504075154.58819-3-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: clock: add clock binding definitions for Exynos Auto v9

Add device tree clock binding definitions for below CMU blocks.

- CMU_TOP
- CMU_BUSMC
- CMU_CORE
- CMU_FYS2
- CMU_PERIC0 / C1
- CMU_PERIS

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-2-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: dmaengine: fsl-imx: deprecate '#dma-channels' and '#dma-requests'

The generic properties, used in most of the drivers and defined in
generic dma-common DT bindings, are 'dma-channels' and 'dma-requests'.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: add toradex,colibri-imx6ull

Add toradex,colibri-imx6ull for carrier board dts,
including aster, iris and iris-v2 device tree,
wifi and nonwifi variants for NAND and eMMC modules.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit

i.Core MX8M Plus is an EDIMM SoM based on NXP i.MX8M Plus from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board from Engicam.

i.Core MX8M Plus needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit.

Add bindings for it.

Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: add ls1021a-iot board

Add the board ls1021a-iot in the binding docuemnt.

Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: Add i.MX8M Mini Toradex Verdin based Menlo board

Add DT compatible string for board based on the Toradex Verdin iMX8M
Mini SoM, the MX8Menlo. The board is a compatible replacement for
i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs,
SD and eMMC.

Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: Add i.MX8M Plus Gateworks GW74xx board

Add DT compatible string for i.MX8M Plus based Gateworks GW74xx board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: add IMX8MN DDR3L eval board

This eval board features an IMX8MN UltraLite and has DDR3L RAM. The
product part number is 8MNANOD3L-EVK.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: Add carriers for toradex,colibri-imx6dl

Add bindings for Aster, Iris and Iris V2 carrier boards our
Colibri iMX6S/DL may be mated with.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: imx6dl-colibri: Drop dedicated v1.1 bindings

The dedicated device tree for V1.1 modules has been dropped. Remove
its bindings too.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.

Add toradex,verdin-imx8mp for the Verdin iMX8M Plus modules, its nonwifi
and wifi variants and the carrier boards (both Dahlia and the Verdin
Development Board) they may be mated in.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: Add i.MX53 based Menlo board comment

Add comment regarding the i.MX53 based Menlo board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL

Add devicetree bindings for phyGATE Tauri board with phyCORE-i.MX6 ULL.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: fsl: add TQ Systems boards based on i.MX6UL(L)

TQMa6ULx is a SOM family using NXP i.MX6UL CPU family.
TQMa6ULLx is a SOM family using NXP i.MX6ULL CPU family.
Both are available as a socket type as well as an LGA type.
For both variants there are the mainboards MBa6ULx and MBa6ULxL, trailing
'L' is LGA version.
Finally there is the possibility to use the socket module with an LGA
adapter on the MBa6ULxL.

The SOM needs a mainboard, therefore we provide compatibles using this
naming schema:

"tq,imx6ul-<SOM>" for the module and
"tq,imx6ul-<SOM>-<SBC>" for when mounted on the mainboard.
The i.MX6ULL version is done similar.

Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: arm: Add Data Modul i.MX8M Mini eDM SBC

Add DT compatible string for Data Modul i.MX8M Mini eDM SBC board
into YAML DT binding document. This system is an evaluation board
for various custom display units.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl

Add the DT binding for the HDMI blk-ctrl found on the i.MX8MP SoC.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains

This adds the defines for the power domains provided by the HDMI
blk-ctrl on the i.MX8MP.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: soc: Add i.MX8MP media block control DT bindings

The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level
peripheral providing access to the NoC and ensuring proper power
sequencing of the peripherals within the MEDIAMIX domain. Add DT
bindings for it.

There is already a driver for block controls of other SoCs in the i.MX8M
family, so these bindings will expand upon that.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arm64: tegra: Add missing DFLL reset on Tegra210

Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling
clocks") removed deassertion of reset lines when enabling peripheral
clocks. This breaks the initialization of the DFLL driver which relied
on this behaviour.

In order to be able to fix this, add the corresponding reset to the DT.
Tested on Google Pixel C.

Cc: stable@vger.kernel.org
Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>

ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)

Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:

-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)

Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:

-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>

ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15

Enable optee and SCMI clocks/reset protocols support.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

dt-bindings: reset: stm32mp15: rename RST_SCMI define

As we only have one SCMI instance, it's not necessary to add an index to
the name.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>

dt-bindings: clock: stm32mp15: rename CK_SCMI define

As we only have one SCMI instance, it's not necessary to add an index to
the name.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>

dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"

In case of "st,stm32mp1-rcc-secure" (stm32mp1 clock driver with RCC
security support hardened), "clocks" and "clock-names" describe oscillators
and are required.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>

dt-bindings: rcc: Add optional external ethernet RX clock properties

Describe optional external ethernet RX clock in the DT binding
to fix dtbs_check warnings like:

arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: rcc@50000000: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Rob Herring <robh+dt@kernel.org>
To: devicetree@vger.kernel.org
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220410220514.21779-1-marex@denx.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

arm64: dts: broadcom: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-6-krzysztof.kozlowski@linaro.org

arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-4-krzysztof.kozlowski@linaro.org

ARM: dts: socfpga: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-3-krzysztof.kozlowski@linaro.org

ARM: dts: zynq-7000: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220430121902.59895-2-krzysztof.kozlowski@linaro.org

ARM: dts: exynos: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-8-krzysztof.kozlowski@linaro.org

ARM: dts: s5pv210: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-7-krzysztof.kozlowski@linaro.org

arm64: dts: fsd: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-10-krzysztof.kozlowski@linaro.org

arm64: dts: exynos: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-9-krzysztof.kozlowski@linaro.org

arm64: dts: exynos: move XTCXO clock frequency to board in Exynos Auto v9

The external oscillator - XTCXO - is an input to the SoC.  It is defined
in the Exynos Auto v9 SoC DTSI, because all boards will provide it and
clock controller bindings expect it, however the actual frequency of the
clock should be determined by the board.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220503092631.174713-1-krzysztof.kozlowski@linaro.org

ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2

Buffalo WZR-1166DHP/WZR-1166DHP2  wireless router with

    - BCM4708A0
    - 128MiB NAND flash
    - 2T2R 11ac/a/b/g/n Wi-Fi
    - 4x 10/100/1000M ethernet switch
    - 1x USB 3.0 port

  WZR-1166DHP and WZR-1166DHP2 have different memory capacity.

  WZR-1166DHP
    - 512 MiB DDR2 SDRAM

  WZR-1166DHP2
    - 256 MiB DDR2 SDRAM

  These hardware components are very similar to the WZR-1750DHP
   except for the number of antennas.

Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arm64: dts: allwinner: teres-i: Add GPIO port regulators

Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220430191009.73946-1-harald@ccbib.org

ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM

The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback,
according to the AT24 EEPROM bindings.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220426183443.243113-1-krzysztof.kozlowski@linaro.org

ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk

The PA13 user button is connected to the PA13 pin of the stm32mp135f-dk
board. It requires an internal pull-up configuration.

Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>