user: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-ID: <20240129164514.73104-30-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-29-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20240129164514.73104-28-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-27-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-26-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-24-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-22-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-21-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-20-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-19-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-18-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-17-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Adjusted patch for hunk that moved to cpu_helper.c]
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/i386/hvf: Use CPUState typedef

QEMU coding style recommend using structure typedefs:
https://www.qemu.org/docs/master/devel/style.html#typedefs

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240129164514.73104-14-philmd@linaro.org>
[thuth: Break long lines to avoid checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-12-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-11-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-10-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro

Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-8-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler

Since CPU() macro is a simple cast, the following are equivalent:

  Object *obj;
  CPUState *cs = CPU(obj)

In order to ease static analysis when running
scripts/coccinelle/cpu_env.cocci from the previous commit,
replace:

 - CPU_GET_CLASS(cpu);
 + CPU_GET_CLASS(obj);

Most code use the 'cs' variable name for CPUState handle.
Replace few 's' -> 'cs' to unify cpu_reset_hold() style.

No logical change in this patch.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

bulk: Call in place single use cpu_env()

Avoid CPUArchState local variable when cpu_env() is used once.

Mechanical patch using the following Coccinelle spatch script:

 @@
 type CPUArchState;
 identifier env;
 expression cs;
 @@
  {
 -    CPUArchState *env = cpu_env(cs);
      ... when != env
 -     env
 +     cpu_env(cs)
      ... when != env
  }

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/core: Declare CPUArchId::cpu as CPUState instead of Object

Do not accept any Object for CPUArchId::cpu field,
restrict it to CPUState type.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-3-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

bulk: Access existing variables initialized to &S->F when available

When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.

Mechanical change using the following Coccinelle spatch script:

 @@
 type S, F;
 identifier s, m, v;
 @@
      S *s;
      ...
      F *v = &s->m;
      <+...
 -    &s->m
 +    v
      ...+>

Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>

error: Move ERRP_GUARD() to the beginning of the function

Since the commit 05e385d2a9 ("error: Move ERRP_GUARD() to the beginning
of the function"), there are new codes that don't put ERRP_GUARD() at
the beginning of the functions.

As stated in the commit 05e385d2a9: "include/qapi/error.h advises to put
ERRP_GUARD() right at the beginning of the function, because only then
can it guard the whole function.", so clean up the few spots
disregarding the advice.

Inspired-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312060337.3240965-1-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x/cpu_models: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In target/s390x/cpu_models.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- check_compatibility()
- s390_realize_cpu_model()

Though both their @errp parameters point to their callers' local @err
virables and don't cause the issue as [1] said, to follow the
requirement of @errp, also add missing ERRP_GUARD() at their beginning.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-30-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

net/vhost-vdpa: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The net_init_vhost_vdpa() passes @errp to error_prepend(), and as a
member of net_client_init_fun[], it's called in net_client_init1() and
gets @errp from this caller.

But because netdev_init_modern() passes &error_fatal to
net_client_init1(), then @errp parameter of net_init_vhost_vdpa() would
point to @error_fatal. This causes the error message in error_prepend()
to be lost because of the above issue.

To fix this, add missing ERRP_GUARD() at the beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240311033822.3142585-29-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

migration/option: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The migrate_params_check() passes @errp to error_prepend() without
ERRP_GUARD(), and it could be called from migration_object_init(),
where the passed @errp points to @error_fatal.

Therefore, the error message echoed in error_prepend() will be lost
because of the above issue.

To fix this, add missing ERRP_GUARD() at the beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Peter Xu <peterx@redhat.com>
Cc: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Peter Xu <peterx@redhat.com>
Message-ID: <20240311033822.3142585-28-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/virtio/vhost: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In hw/virtio/vhost.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- vhost_save_backend_state()
- vhost_load_backend_state()

Their @errp both points to callers' @local_err. However, as the APIs
defined in include/hw/virtio/vhost.h, it is necessary to protect their
@errp with ERRP_GUARD().

To follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-27-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/virtio/vhost-vsock: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The vhost_vsock_device_realize() passes @errp to error_prepend(), and as
a VirtioDeviceClass.realize method, its @errp is from
DeviceClass.realize so that there is no guarantee that the @errp won't
point to @error_fatal.

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-26-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/vfio/platform: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The vfio_platform_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-25-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/vfio/pci: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In hw/vfio/pci.c, there are 2 functions passing @errp to error_prepend()
without ERRP_GUARD():
- vfio_add_std_cap()
- vfio_realize()

The @errp of vfio_add_std_cap() is also from vfio_realize(). And
vfio_realize(), as a PCIDeviceClass.realize method, its @errp is from
DeviceClass.realize so that there is no guarantee that the @errp won't
point to @error_fatal.

To avoid the issue like [1] said, add missing ERRP_GUARD() at their
beginning.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-24-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/vfio/pci-quirks: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In hw/vfio/pci-quirks.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- vfio_add_nv_gpudirect_cap()
- vfio_add_vmd_shadow_cap()

There are too many possible callers to check the impact of this defect;
it may or may not be harmless. Thus it is necessary to protect their
@errp with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-23-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/vfio/iommufd: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The iommufd_cdev_getfd() passes @errp to error_prepend(). Its @errp is
from vfio_attach_device(), and there are too many possible callers to
check the impact of this defect; it may or may not be harmless. Thus it
is necessary to protect @errp with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-22-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/vfio/helpers: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In hw/vfio/helpers.c, there are 3 functions passing @errp to
error_prepend() without ERRP_GUARD():
 - vfio_set_irq_signaling()
 - vfio_device_get_name()
 - vfio_device_set_fd()

There are too many possible callers to check the impact of this defect;
it may or may not be harmless. Thus it is necessary to protect their
@errp with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at their
beginning.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-21-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/vfio/container: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The vfio_get_group() passes @errp to error_prepend(). Its @errp is
from vfio_attach_device(), and there are too many possible callers to
check the impact of this defect; it may or may not be harmless. Thus it
is necessary to protect @errp with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-20-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/vfio/ap: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The vfio_ap_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cédric Le Goater <clg@redhat.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Jason Herne <jjherne@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-19-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/scsi/vhost-scsi: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The vhost_scsi_realize() passes @errp to error_prepend(), and as a
VirtioDeviceClass.realize method, its @errp is from DeviceClass.realize
so that there is no guarantee that the @errp won't point to
@error_fatal.

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Fam Zheng <fam@euphon.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-18-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/virtio-blk: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The virtio_blk_vq_aio_context_init() passes @errp to error_prepend().

Though its @errp points its caller's local @err variable, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of
virtio_blk_vq_aio_context_init().

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Message-ID: <20240311033822.3142585-14-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/vmdk: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The vmdk_parse_extents() passes @errp to error_prepend(), and its @errp
is from vmdk_open().

Though, vmdk_open(), as a BlockDriver.bdrv_open(), gets the @errp
parameter which is pointer of its caller's local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Fam Zheng <fam@euphon.net>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-13-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/vdi: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The vdi_co_do_create() passes @errp to error_prepend() without
ERRP_GUARD(), and its @errp parameter is so widely sourced that it is
necessary to protect it with ERRP_GUARD().

To avoid the potential issues as [1] said, add missing ERRP_GUARD() at
the beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Stefan Weil <sw@weilnetz.de>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-12-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/snapshot: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In block/snapshot.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
 - bdrv_all_delete_snapshot()
 - bdrv_all_goto_snapshot()

As the APIs exposed in include/block/snapshot.h, they could be called
by other modules.

To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of these 2 functions.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-11-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/qed: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The bdrv_qed_co_invalidate_cache() passes @errp to error_prepend()
without ERRP_GUARD().

Though it is a BlockDriver.bdrv_co_invalidate_cache() method, and
currently its @errp parameter only points to callers' local_err, to
follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-10-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/qcow2: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In block/qcow2.c, there are 2 functions passing @errp to error_prepend()
without ERRP_GUARD():
 - qcow2_co_create()
 - qcow2_co_truncate()

There are too many possible callers to check the impact of the defect;
it may or may not be harmless. Thus it is necessary to protect @errp with
ERRP_GUARD().

Therefore, to avoid the issue like [1] said, add missing ERRP_GUARD() at
their beginning.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240311033822.3142585-9-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/qcow2-bitmap: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The qcow2_co_can_store_new_dirty_bitmap() passes @errp to
error_prepend(). As a BlockDriver.bdrv_co_can_store_new_dirty_bitmap
method, it's called by bdrv_co_can_store_new_dirty_bitmap().

Its caller is not being called anywhere, but as the API in
include/block/block-io.h, we can't ensure what kind of @errp future
users will pass in.

To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of qcow2_co_can_store_new_dirty_bitmap().

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: John Snow <jsnow@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-8-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/nvme: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In nvme.c, there are 3 functions passing @errp to error_prepend()
without ERRP_GUARD():
- nvme_init_queue()
- nvme_create_queue_pair()
- nvme_identify()

All these 3 functions take their @errp parameters from the
nvme_file_open(), which is a BlockDriver.bdrv_nvme() method and its
@errp points to its caller's local_err.

Though these 3 cases haven't trigger the issue like [1] said, to
follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <fam@euphon.net>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-7-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/nbd: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The nbd_co_do_receive_one_chunk() passes @errp to error_prepend()
without ERRP_GUARD(), and though its @errp parameter points to its
caller's local_err, to follow the requirement of @errp, add missing
ERRP_GUARD() at the beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Eric Blake <eblake@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-6-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/copy-before-write: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The cbw_open() passes @errp to error_prepend() without ERRP_GUARD().

Though it is the BlockDriver.bdrv_open() method, and currently its
@errp parameter only points to callers' local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: John Snow <jsnow@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-5-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

In block.c, there are 4 functions passing @errp to error_prepend()
without ERRP_GUARD():
 - bdrv_co_create_opts_simple()
 - parse_json_filename()
 - bdrv_open_backing_file()
 - bdrv_append_temp_snapshot()

bdrv_co_create_opts_simple(), is an implementation of
BlockDriver.bdrv_co_create_opts(). There are too many possible callers
to check the impact of this defect; it may or may not be harmless. Thus
it is necessary to protect @errp with ERRP_GUARD().

Though the @errp parameters passed to parse_json_filename(),
bdrv_open_backing_file() and bdrv_append_temp_snapshot() points to their
callers' local_err, to follow the requirement of @errp, also add missing
ERRP_GUARD() at their beginning.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240311033822.3142585-4-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

backends/iommufd: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].

The iommufd_backend_set_fd() passes @errp to error_prepend(), to avoid
the above issue, add missing ERRP_GUARD() at the beginning of this
function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Yi Liu <yi.l.liu@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-ID: <20240311033822.3142585-3-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

error: Add error_vprepend() in comment of ERRP_GUARD() rules

The error_vprepend() should use ERRP_GUARD() just as the documentation
of ERRP_GUARD() says:

> It must be used when the function dereferences @errp or passes
> @errp to error_prepend(), error_vprepend(), or error_append_hint().

Considering that error_vprepend() is also an API provided in error.h,
it is necessary to add it to the description of the rules for using
ERRP_GUARD().

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240311033822.3142585-2-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/intc: Check @errp to handle the error of IOAPICCommonClass.realize()

IOAPICCommonClass implements its own private realize(), and this private
realize() allows error.

Since IOAPICCommonClass.realize() returns void, to check the error,
dereference @errp with ERRP_GUARD().

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223085653.1255438-8-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/pci-bridge/cxl_upstream: Fix missing ERRP_GUARD() in cxl_usp_realize()

As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.

But in cxl_usp_realize(), @errp is dereferenced without ERRP_GUARD():

cxl_doe_cdat_init(cxl_cstate, errp);
if (*errp) {
    goto err_cap;
}

Here we check *errp, because cxl_doe_cdat_init() returns void. And since
cxl_usp_realize() - as a PCIDeviceClass.realize() method - doesn't get
the NULL @errp parameter, it hasn't triggered the bug that dereferencing
the NULL @errp.

To follow the requirement of @errp, add missing ERRP_GUARD() in
cxl_usp_realize().

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223085653.1255438-6-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/misc/xlnx-versal-trng: Check returned bool in trng_prop_fault_event_set()

As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.

But in trng_prop_fault_event_set, @errp is dereferenced without
ERRP_GUARD():

visit_type_uint32(v, name, events, errp);
if (*errp) {
    return;
}

Currently, since trng_prop_fault_event_set() doesn't get the NULL @errp
parameter as a "set" method of object property, it hasn't triggered the
bug that dereferencing the NULL @errp.

And since visit_type_uint32() returns bool, check the returned bool
directly instead of dereferencing @errp, then we needn't the add missing
ERRP_GUARD().

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223085653.1255438-5-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/mem/cxl_type3: Fix missing ERRP_GUARD() in ct3_realize()

As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.

But in ct3_realize(), @errp is dereferenced without ERRP_GUARD():

cxl_doe_cdat_init(cxl_cstate, errp);
if (*errp) {
    goto err_free_special_ops;
}

Here we check *errp, because cxl_doe_cdat_init() returns void. And
ct3_realize() - as a PCIDeviceClass.realize() method - doesn't get the
NULL @errp parameter, it hasn't triggered the bug that dereferencing
the NULL @errp.

To follow the requirement of @errp, add missing ERRP_GUARD() in
ct3_realize().

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240223085653.1255438-4-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/display/macfb: Fix missing ERRP_GUARD() in macfb_nubus_realize()

As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.

But in macfb_nubus_realize(), @errp is dereferenced without
ERRP_GUARD():

ndc->parent_realize(dev, errp);
if (*errp) {
    return;
}

Here we check *errp, because the ndc->parent_realize(), as a
DeviceClass.realize() callback, returns void. And since
macfb_nubus_realize(), also as a DeviceClass.realize(), doesn't get the
NULL @errp parameter, it hasn't triggered the bug that dereferencing the
NULL @errp.

To follow the requirement of @errp, add missing ERRP_GUARD() in
macfb_nubus_realize().

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240223085653.1255438-3-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/cxl/cxl-host: Fix missing ERRP_GUARD() in cxl_fixed_memory_window_config()

As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.

But in cxl_fixed_memory_window_config(), @errp is dereferenced in 2
places without ERRP_GUARD():

fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
if (*errp) {
    return;
}

and

fw->enc_int_gran =
    cxl_interleave_granularity_enc(object->interleave_granularity,
                                   errp);
if (*errp) {
    return;
}

For the above 2 places, we check "*errp", because neither function
returns a suitable error code. And since machine_set_cfmw() - the caller
of cxl_fixed_memory_window_config() - doesn't get the NULL @errp
parameter as the "set" method of object property,
cxl_fixed_memory_window_config() hasn't triggered the bug that
dereferencing the NULL @errp.

To follow the requirement of @errp, add missing ERRP_GUARD() in
cxl_fixed_memory_window_config().

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240223085653.1255438-2-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Merge tag 'hw-misc-20240309' of https://github.com/philmd/qemu into staging

Misc HW patch queue

- hmp: Shorter 'info qtree' output (Zoltan)
- qdev: Add a granule_mode property (Eric)
- Some ERRP_GUARD() fixes (Zhao)
- Doc & style fixes in docs/interop/firmware.json (Thomas)
- hw/xen: Housekeeping (Phil)
- hw/ppc/mac99: Change timebase frequency 25 -> 100 MHz (Mark)
- hw/intc/apic: Memory leak fix (Paolo)
- hw/intc/grlib_irqmp: Ensure ncpus value is in range (Clément)
- hw/m68k/mcf5208: Add support for reset (Angelo)
- hw/i386/pc: Housekeeping (Phil)
- hw/core/smp: Remove/deprecate parameter=0,1 adapting test-smp-parse (Zhao)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXstpMACgkQ4+MsLN6t
# wN6XBw//dNItFhf1YX+Au4cNoQVDgHE9RtzEIGOnwcL1CgrA9rAQQfLRE5KWM6sN
# 1qiPh+T6SPxtiQ2rw4AIpsI7TXjO72b/RDWpUUSwnfH39eC77pijkxIK+i9mYI9r
# p0sPjuP6OfolUFYeSbYX+DmNZh1ONPf27JATJQEf0st8dyswn7lTQvJEaQ97kwxv
# UKA0JD5l9LZV8Zr92cgCzlrfLcbVblJGux9GYIL09yN78yqBuvTm77GBC/rvC+5Q
# fQC5PQswJZ0+v32AXIfSysMp2R6veo4By7VH9Lp51E/u9jpc4ZbcDzxzaJWE6zOR
# fZ01nFzou1qtUfZi+MxNiDR96LP6YoT9xFdGYfNS6AowZn8kymCs3eo7M9uvb+rN
# A2Sgis9rXcjsR4e+w1YPBXwpalJnLwB0QYhEOStR8wo1ceg7GBG6zHUJV89OGzsA
# KS8X0aV1Ulkdm/2H6goEhzrcC6FWLg8pBJpfKK8JFWxXNrj661xM0AAFVL9we356
# +ymthS2x/RTABSI+1Lfsoo6/SyXoimFXJJWA82q9Yzoaoq2gGMWnfwqxfix6JrrA
# PuMnNP5WNvh04iWcNz380P0psLVteHWcVfTRN3JvcJ9iJ2bpjcU1mQMJtvSF9wBn
# Y8kiJTUmZCu3br2e5EfxmypM/h8y29VD/1mxPk8Dtcq3gjx9AU4=
# =juZH
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 09 Mar 2024 19:20:51 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'hw-misc-20240309' of https://github.com/philmd/qemu: (43 commits)
  hw/m68k/mcf5208: add support for reset
  tests/unit/test-smp-parse: Test "parameter=0" SMP configurations
  tests/unit/test-smp-parse: Test smp_props.has_clusters
  tests/unit/test-smp-parse: Test the full 7-levels topology hierarchy
  tests/unit/test-smp-parse: Test "drawers" and "books" combination case
  tests/unit/test-smp-parse: Test "drawers" parameter in -smp
  tests/unit/test-smp-parse: Test "books" parameter in -smp
  tests/unit/test-smp-parse: Make test cases aware of the book/drawer
  tests/unit/test-smp-parse: Bump max_cpus to 4096
  tests/unit/test-smp-parse: Use CPU number macros in invalid topology case
  tests/unit/test-smp-parse: Drop the unsupported "dies=1" case
  hw/core/machine-smp: Calculate total CPUs once in machine_parse_smp_config()
  hw/core/machine-smp: Deprecate unsupported "parameter=1" SMP configurations
  hw/core/machine-smp: Remove deprecated "parameter=0" SMP configurations
  docs/interop/firmware.json: Fix doc for FirmwareFlashMode
  docs/interop/firmware.json: Align examples
  hw/intc/grlib_irqmp: abort realize when ncpus value is out of range
  mac_newworld: change timebase frequency from 100MHz to 25MHz for mac99 machine
  hmp: Add option to info qtree to omit details
  qdev: Add a granule_mode property
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging

trivial patches for 2024-03-09

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmXshtIPHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZMFUIAKTd1rYzRs6x4wXitaWbYIIs2d6UB/HLbzz2
# BVHZwoYqsW3TuNFJp4njHhexZ76nFlT8xMuOKB5tAm4KOmqOdxS/mfThuSGsWGP7
# CAk35ENOMQbii/jp6tqawop+H0rVMSJjBrkU4vLRAtQ7g1ISnX6tJi3wiyS+FtHq
# 9eIfgJgM77tvq6RLPZTUrUBevMWQfjMcvXmMnYqL4Z1dnibIb5/R3RKAnEc4CUoS
# hMw94wBcq+ZOQNPnY7d+WioKq7JcSWX7UW5NuHo+C+G83nq1/5vE8Oe2kNwzFyDL
# 9sIqL8bz6v8iiqcVMIBykSAZhYH9QEuVRJso18UE5w0B8k4CQcM=
# =dIAF
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 09 Mar 2024 15:57:06 GMT
# gpg:                using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg:                issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg:                 aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
  docs/acpi/bits: add some clarity and details while also improving formating
  hw/mem/cxl_type3: Fix problem with g_steal_pointer()
  hw/pci-bridge/cxl_upstream: Fix problem with g_steal_pointer()
  hw/cxl/cxl-cdat: Fix type of buf in ct3_load_cdat()
  qerror: QERR_DEVICE_IN_USE is no longer used, drop
  blockdev: Fix block_resize error reporting for op blockers
  char: Slightly better error reporting when chardev is in use
  make-release: switch to .xz format by default
  hw/scsi/lsi53c895a: Fix typo in comment
  hw/vfio/pci.c: Make some structure static
  replay: Improve error messages about configuration conflicts

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/m68k/mcf5208: add support for reset

Add reset support for mcf5208.

Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240309093459.984565-1-angelo@kernel-space.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Test "parameter=0" SMP configurations

The support for "parameter=0" SMP configurations is removed, and QEMU
returns error for those cases.

So add the related test cases to ensure parameters can't accept 0.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-14-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Test smp_props.has_clusters

The smp_props.has_clusters in MachineClass is not a user configured
field, and it indicates if user specifies "clusters" in -smp.

After -smp parsing, other module could aware if the cluster level
is configured by user. This is used when the machine has only 1 cluster
since there's only 1 cluster by default.

Add the check to cover this field.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-13-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Test the full 7-levels topology hierarchy

Currently, -smp supports up to 7-levels topology hierarchy:
  -drawers/books/sockets/dies/clusters/cores/threads.

Though no machine supports all these 7 levels yet, these 7 levels have
the strict containment relationship and together form the generic CPU
topology representation of QEMU.

Also, note that the maxcpus is calculated by multiplying all 7 levels:

  maxcpus = drawers * books * sockets * dies * clusters *
            cores * threads.

To cover this code path, it is necessary to test the full topology case
(with all 7 levels). This also helps to avoid introducing new issues by
further expanding the CPU topology in the future.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-12-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Test "drawers" and "books" combination case

Since s390 machine supports both "drawers" and "books" in -smp, add the
"drawers" and "books" combination test case to match the actual topology
usage scenario.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-11-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Test "drawers" parameter in -smp

Although drawer was introduced to -smp along with book by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-10-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Test "books" parameter in -smp

Although book was introduced to -smp along with drawer by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-9-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Make test cases aware of the book/drawer

Currently, -smp supports 2 more new levels: book and drawer.

It is necessary to consider the effects of book and drawer in the test
cases to ensure that the calculations are correct. This is also the
preparation to add new book and drawer test cases.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-8-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Bump max_cpus to 4096

The q35 machine is trying to support up to 4096 vCPUs [1], so it's
necessary to bump max_cpus in test-smp-parse to 4096 to cover the
topological needs of future machines.

[1]: https://lore.kernel.org/qemu-devel/20240228143351.3967-1-anisinha@redhat.com/

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-7-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Use CPU number macros in invalid topology case

Use MAX_CPUS/MIN_CPUS macros in invalid topology case. This gives us the
flexibility to change the maximum and minimum CPU limits.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-6-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tests/unit/test-smp-parse: Drop the unsupported "dies=1" case

Unsupported "parameter=1" SMP configurations is marked as deprecated,
so drop the related test case.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-5-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/core/machine-smp: Calculate total CPUs once in machine_parse_smp_config()

In machine_parse_smp_config(), the number of total CPUs is calculated
by:

    drawers * books * sockets * dies * clusters * cores * threads

To avoid missing the future new topology level, use a local variable to
cache the calculation result so that total CPUs are only calculated
once.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308160148.3130837-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/core/machine-smp: Deprecate unsupported "parameter=1" SMP configurations

Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".

This is meaningless and confusing, so that the support for this kind of
configurations is marked deprecated since 9.0. And report warning
message for such case like:

qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
                    Unsupported clusters parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
                    Unsupported books parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
                    Unsupported drawers parameter mustn't be specified as 1

Users have to ensure that all the topology members described with -smp
are supported by the target machine.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/core/machine-smp: Remove deprecated "parameter=0" SMP configurations

The "parameter=0" SMP configurations have been marked as deprecated
since v6.2.

For these cases, -smp currently returns the warning and adjusts the
zeroed parameters to 1 by default.

Remove the above compatibility logic in v9.0, and return error directly
if any -smp parameter is set as 0.

Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240308160148.3130837-2-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

docs/interop/firmware.json: Fix doc for FirmwareFlashMode

The doc title did not match the actual definition.

Fixes: 2720ceda05 ("docs: expand firmware descriptor to allow flash without NVRAM")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240307-qapi-firmware-json-v2-2-3b29eabb9b9a@linutronix.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

docs/interop/firmware.json: Align examples

Adjust indentation for commit d23055b8db8 (qapi: Require descriptions
and tagged sections to be indented).

Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240307-qapi-firmware-json-v2-1-3b29eabb9b9a@linutronix.de>
[PMD: Reword description using Markus suggestion]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/intc/grlib_irqmp: abort realize when ncpus value is out of range

Even if the error is set, the build is not aborted when the ncpus value
is wrong, the return is missing.

Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 6bf1478543 ("hw/intc/grlib_irqmp: add ncpus property")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308152719.591232-1-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

mac_newworld: change timebase frequency from 100MHz to 25MHz for mac99 machine

MacOS X uses multiple techniques for calibrating timers depending upon the detected
hardware. One of these calibration routines compares the change in the timebase
against the KeyLargo timer and uses this to recalculate the clock frequency,
timebase frequency and bus frequency if the calibration exceeds certain limits.
This recalibration occurs despite the correct values being passed via the device
tree, and is likely due to buggy firmware on some hardware.

The timebase frequency of 100MHz was set way back in 2005 by commit fa296b0fb4
("PIC fix - changed back TB frequency to 100 MHz") and with this value on a
mac99,via=pmu machine the OSX 10.2 timer calibration incorrectly calculates the
bus frequency as 400MHz instead of 100MHz. The most noticeable side-effect is
the UI appears sluggish and not very responsive for normal use.

Change the timebase frequency from 100MHz to 25MHz which matches that of a real
G4 AGP machine (the closest match to QEMU's mac99 machine) and allows OSX 10.2
to correctly detect all of the clock frequency, timebase frequency and bus
frequency.

Tested on various MacOS images from OS 9.2 through to OSX 10.4, along with Linux
and NetBSD and I was unable to find any regressions from this change.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240304073548.2098806-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hmp: Add option to info qtree to omit details

The output of info qtree monitor command is very long. Add an option
to print a brief overview omitting all the details.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20240307183812.0105D4E6004@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

qdev: Add a granule_mode property

Introduce a new enum type property allowing to set an
IOMMU granule. Values are 4k, 8k, 16k, 64k and host.
This latter indicates the vIOMMU granule will match
the host page size.

A subsequent patch will add such a property to the
virtio-iommu device.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240227165730.14099-2-eric.auger@redhat.com>

hw/intc/apic: fix memory leak

deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached.  Fix this by switching to g_autofree and, while at
it, also switch to g_new.  Do the same in apic_deliver_irq() as well
for consistency.

Fixes: b5ee0468e9d ("apic: add support for x2APIC mode", 2024-02-14)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240304224133.267640-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/i386/pc: Have pc_init_isa() pass a NULL pci_type argument

The "isapc" machine only provides an ISA bus, not a PCI one,
and doesn't instanciate any i440FX south bridge.
Its machine class defines PCMachineClass::pci_enabled = false,
and pc_init1() only uses the pci_type argument when pci_enabled
is true. Since for this machine the argument is not used,
passing NULL makes more sense.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240301185936.95175-5-philmd@linaro.org>

hw/i386/pc: Remove 'host_type' argument from pc_init1()

All callers use host_type=TYPE_I440FX_PCI_HOST_BRIDGE.
Directly use this definition within pc_init1().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-4-philmd@linaro.org>

hw/i386/pc: Use generated NotifyVmexitOption_str()

NotifyVmexitOption_str() is QAPI-generated in
"qapi/qapi-types-run-state.h", which "sysemu/runstate.h"
already includes.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-3-philmd@linaro.org>

hw/i386/pc: Remove pc_compat_1_4..1.7[] left over declarations

These definitions were removed in commit ea985d235b
("pc_piix: remove pc-i440fx-1.4 up to pc-i440fx-1.7").

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-2-philmd@linaro.org>

target/i386/sev: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].

The sev_inject_launch_secret() passes @errp to error_prepend(), and as
an APIs defined in target/i386/sev.h, it is necessary to protect its
@errp with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-17-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/remote/remote-obj: hw/misc/ivshmem: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].

The remote_object_set_fd() passes @errp to error_prepend(), and as a
PropertyInfo.set method, its @errp is so widely sourced that it is
necessary to protect it with ERRP_GUARD().

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/net/xen_nic: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].

The xen_netdev_connect() passes @errp to error_prepend(), and its @errp
parameter is from xen_device_frontend_changed().

Though its @errp points to @local_err of xen_device_frontend_changed(),
to follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/char/xen_console: Fix missing ERRP_GUARD() for error_prepend()

As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():

* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
*   error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.

ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].

The xen_console_connect() passes @errp to error_prepend() without
ERRP_GUARD().

There're 2 places will call xen_console_connect():
 - xen_console_realize(): the @errp is from DeviceClass.realize()'s
  parameter.
 - xen_console_frontend_changed(): the @errp points its caller's
                                   @local_err.

To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of xen_console_connect().

[1]: Issue description in the commit message of commit ae7c80a7bd73
     ("error: New macro ERRP_GUARD()").

Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-ID: <20240228163723.1775791-15-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/xen/hvm: Get target page size at runtime

In order to build this file once for all targets, replace:

  TARGET_PAGE_BITS -> qemu_target_page_bits()
  TARGET_PAGE_SIZE -> qemu_target_page_size()
  TARGET_PAGE_MASK -> -qemu_target_page_size()

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-4-philmd@linaro.org>

hw/xen/hvm: Propagate page_mask to a pair of functions

We are going to replace TARGET_PAGE_MASK by a
runtime variable. In order to reduce code duplication,
propagate TARGET_PAGE_MASK to get_physmapping() and
xen_phys_offset_to_gaddr().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-3-philmd@linaro.org>

hw/xen/hvm: Inline TARGET_PAGE_ALIGN() macro

Use TARGET_PAGE_SIZE to calculate TARGET_PAGE_ALIGN.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-2-philmd@linaro.org>

hw/i386/xen: Compile 'xen-hvm.c' with Xen CPPFLAGS

xen-hvm.c calls xc_set_hvm_param() from <xenctrl.h>,
so better compile it with Xen CPPFLAGS.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-19-philmd@linaro.org>

hw/xen: Extract 'xen_igd.h' from 'xen_pt.h'

"hw/xen/xen_pt.h" requires "hw/xen/xen_native.h" which is target
specific. It also declares IGD methods, which are not target
specific.

Target-agnostic code can use IGD methods. To allow that, extract
these methos into a new "hw/xen/xen_igd.h" header.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-18-philmd@linaro.org>

hw/xen/xen_pt: Add missing license

Commit eaab4d60d3 ("Introduce Xen PCI Passthrough, qdevice")
introduced both xen_pt.[ch], but only added the license to
xen_pt.c. Use the same license for xen_pt.h.

Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-17-philmd@linaro.org>

hw/xen: Use target-agnostic qemu_target_page_bits()

Instead of the target-specific TARGET_PAGE_BITS definition,
use qemu_target_page_bits() which is target agnostic.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-15-philmd@linaro.org>

hw/xen: Rename 'ram_memory' global variable as 'xen_memory'

To avoid a potential global variable shadow in
hw/i386/pc_piix.c::pc_init1(), rename Xen's
"ram_memory" as "xen_memory".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-11-philmd@linaro.org>

hw/xen: Remove unnecessary xen_hvm_inject_msi() stub

Since commit 04b0de0ee8 ("xen: factor out common functions")
xen_hvm_inject_msi() stub is not required.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-8-philmd@linaro.org>

hw/pci/msi: Restrict xen_is_pirq_msi() call to Xen

Similarly to the restriction in hw/pci/msix.c (see commit
e1e4bf2252 "msix: fix msix_vector_masked"), restrict the
xen_is_pirq_msi() call in msi_is_masked() to Xen.

No functional change intended.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-7-philmd@linaro.org>

system/physmem: Do not include 'hw/xen/xen.h' but 'sysemu/xen.h'

physmem.c doesn't use any declaration from "hw/xen/xen.h",
it only requires "sysemu/xen.h" and "system/xen-mapcache.h".

Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20231114143816.71079-5-philmd@linaro.org>

sysemu/xen-mapcache: Check Xen availability with CONFIG_XEN_IS_POSSIBLE

"sysemu/xen.h" defines CONFIG_XEN_IS_POSSIBLE as a target-agnostic
version of CONFIG_XEN accelerator.
Use it in order to use "sysemu/xen-mapcache.h" in target-agnostic files.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-4-philmd@linaro.org>

sysemu/xen: Forbid using Xen headers in user emulation

Xen is a system specific accelerator, it makes no sense
to include its headers in user emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-3-philmd@linaro.org>

hw/i386: Rename kvmvapic.c -> vapic.c

vAPIC isn't KVM specific, so having its name prefixed 'kvm'
is misleading. Rename it simply 'vapic'. Rename the single
function prefixed 'kvm'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230905145159.7898-1-philmd@linaro.org>