drm/amd: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Resolved offchip EEPROM I/O issue

Updated target I2C address

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Apply noretry setting for mmhub9.4

Config the translation retry behavior according to noretry
kernel parameter

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Suggested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add default clocks if not able to fetch them

dm_pp_get_clock_levels_by_type needs to add the default clocks
to the powerplay case as well.  This was accidently dropped.

Fixes: b3ea88fef321de ("drm/amd/powerplay: add get_clock_by_type interface for display")
Bug: https://gitlab.freedesktop.org/drm/amd/issues/906
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use ARRAY_SIZE for sos_old_versions

Fixes coccicheck warning:

drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:182:40-41: WARNING: Use ARRAY_SIZE

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Use ARRAY_SIZE for smu7_profiling

Fixes coccicheck warning:

drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:4946:28-29: WARNING: Use ARRAY_SIZE

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove duplicate functions update_mqd_hiq()

The functions are the same as update_mqd().

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10

It may lose gpuvm invalidate acknowldege state across power-gating off
cycle. To avoid this issue in gmc9/gmc10 invalidation, add semaphore acquire
before invalidation and semaphore release after invalidation.

After adding semaphore acquire before invalidation, the semaphore
register become read-only if another process try to acquire semaphore.
Then it will not be able to release this semaphore. Then it may cause
deadlock problem. If this deadlock problem happens, it needs a semaphore
firmware fix.

Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub

SW must acquire/release one of the vm_invalidate_eng*_sem around the
invalidation req/ack. Through this way,it can avoid losing invalidate
acknowledge state across power-gating off cycle.
To use vm_invalidate_eng*_sem, it needs to initialize
vm_invalidate_eng*_sem firstly.

Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.

After rlcg fw 2.1, kmd driver starts to load extra fw for
LIST_CNTL,GPM_MEM,SRM_MEM. We needs to skip the three fw
because all rlcg related fw have been loaded by host driver.
Guest driver would load the three fw fail without this change.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF

Temporarily skip ras,dtm,hdcp initialize and terminate for arcturus VF
Currently the three features haven't been enabled at SRIOV, it would
trigger guest driver load fail with the bare-metal path of the three
features.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: re-init clear state buffer after gpu reset

This patch fixes 2nd baco reset failure with gfxoff enabled on navi1x.

clear state buffer (resides in vram) is corrupted after 1st baco reset,
upon gfxoff exit, CPF gets garbage header in CSIB and hangs.

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

merge fix for "ftrace: Rework event_create_dir()"

Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant assignment to pointer write_frame

The pointer write_frame is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify runtime suspend

In the standard _PR3 case, the pci core handles the pci state.
The driver only needs to handle it in the legacy ATPX case.

This may fix issues with runtime suspend/resume on certain
hybrid graphics laptops.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: DIQ should not use HIQ way to allocate memory

In the mqd_diq_sdma buffer, there should be only one HIQ mqd. All DIQs
should be allocated somewhere else using the regular way.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Delete KFD_MQD_TYPE_COMPUTE

It is the same as KFD_MQD_TYPE_CP, so delete it. As a result, we will
have one less mqd mananger per device.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update Arcturus golden registers

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement querying ras error count for mmhub9.4

Get mmhub error counter by accessing EDC_CNT registers.

v2: Add mmhub_v9_4_ prefix for local static variable and function

Signed-off-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine query function of mmhub EDC counter in vg20

Add codes to print the detail EDC info for the subblock of mmhub

v2: Move the EDC_CNT registers' defintion from mmhub_9_4 header
files to mmhub_1_0 ones. Add mmhub_v1_0_ prefix for the local
static variable and function.

v3: squash in DC fix

Signed-off-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: define soc15_ras_field_entry for reuse

The struct soc15_ras_field_entry will be reused by
other IPs, such as mmhub and gc

v2: rename ras_subblock_regs to gc_ras_fields_vg20,
because the future asic maybe have a different table.

Signed-off-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access

Fixes: 0bb419c76b3150 ("drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)")
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt

50us is not enough to wait for cp ready after gpu reset on some navi asics.

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Suggested-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdgpu: force to trigger a no-retry-fault after a retry-fault

Only for the debugger use case.

[why]
Avoid endless translation retries, after an invalid address access has
been issued to the GPU. Instead, the trap handler is forced to enter by
generating a no-retry-fault.
A s_trap instruction is inserted in the debugger case to let the wave to
enter trap handler to save context.

[how]
Intentionally using an invalid flag combination (F and P set at the same
time) to trigger a no-retry-fault, after a retry-fault happens. This is
only valid under compute context.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add flag to indicate amdgpu vm context

Flag added to indicate if the amdgpu vm context is used for compute or
graphics.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable runtime pm on BACO capable boards if runpm=1

BACO - Bus Active, Chip Off

Everything is in place now.  Not enabled by default yet.  You
still have to specify runpm=1.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disentangle runtime pm and vga_switcheroo

Originally we only supported runtime pm on PX/HG laptops
so vga_switcheroo and runtime pm are sort of entangled.

Attempt to logically separate them.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: start to disentangle boco from runtime pm

BACO - Bus Active, Chip Off
BOCO - Bus Off, Chip Off

We originally only supported runtime pm on PX/HG
laptops so most of the runtime pm code looks for this.
Add a new flag to check for runtime pm enablement and
use this rather than checking for PX/HG.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add baco support to runtime suspend/resume

BACO - Bus Active, Chip Off

This adds the necessary support to the runtime suspend
and resume functions to handle boards that support
baco.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add helpers for baco entry and exit

BACO - Bus Active, Chip Off

Will be used for runtime pm.  Entry will enter the BACO
state (chip off).  Exit will exit the BACO state (chip on).

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split swSMU baco_reset into enter and exit

BACO - Bus Active, Chip Off

So we can use it for power savings rather than just reset.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add additional boco checks to runtime suspend/resume (v2)

BACO - Bus Active, Chip Off
BOCO - Bus Off, Chip Off

We will take slightly different paths for boco and baco.

v2: fold together two consecutive if clauses

Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rename amdgpu_device_is_px to amdgpu_device_supports_boco (v2)

BACO - Bus Active, Chip Off
BOCO - Bus Off, Chip Off

To better match what we are checking for and to align with
amdgpu_device_supports_baco.

BOCO is used on PowerXpress/Hybrid Graphics systems and BACO
is used on desktop dGPU boards.

v2: fix typo in documentation

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add a amdgpu_device_supports_baco helper

BACO - Bus Active, Chip Off

To check if a device supports BACO or not.  This will be
used in determining when to enable runtime pm.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add supports_baco callback for NV asics.

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add supports_baco callback for VI asics.

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add supports_baco callback for CIK asics.

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add supports_baco callback for SI asics.

BACO - Bus Active, Chip Off

Not supported.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add supports_baco callback for soc15 asics. (v2)

BACO - Bus Active, Chip Off

Check the BACO capabilities from the powerplay table.

v2: drop unrelated struct cleanup

Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add asic callback for BACO support

BACO - Bus Active, Chip Off

Used to check whether the device supports BACO.  This will
be used to enable runtime pm on devices which support BACO.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable gpu_busy_percent sys interface for renoir (v2)

To get the value of gpu_busy_percent, it needs to realize
get_current_activity_percent and get_metrics_table.
The framework of renoir smu is different from old ones like raven. It
needs to realize get_current_activity_percent and get_metrics_table in
renoir_ppt.c like navi10.

v2: remove unused variable (Alex)

Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: pull ras controller int status only when ras enabled

ras_controller_irq and athub_err_event_irq are only registered
when PCIE_BIF ras is marked as supported. as the result, the driver
also just need pull the int status in such case.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to common helper func for psp cmd submission

Drop all the IP specific cmd_submit callback function
and use the common helper instead

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add helper func for psp ring cmd submission

Except for ring wptr update, the psp ring cmd submission
function shouldn't be IP specific one. Create a common
helper function to be shared for all the ASICs.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp funcs for ring write pointer read/write

The ring write pointer regsiter update is the only part that
is IP specific ones in psp_cmd_submit function.

Add two callbacks for wptr read/write so that we unify the
psp_cmd_submit function for all the ASICs.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add missing header file declaration

This can fix the compile errors below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function ‘smu_v11_0_baco_set_state’:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1674:27: error: implicit declaration of function ‘amdgpu_ras_get_context’ [-Werror=implicit-function-declaration]
  struct amdgpu_ras *ras = amdgpu_ras_get_context(adev);
                           ^
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1674:27: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1692:19: error: dereferencing pointer to incomplete type ‘struct amdgpu_ras’
   if (!ras || !ras->supported) {

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Arcturus baco reset support

Enable baco reset support on Arcturus.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct swSMU baco reset related settings

Added bif doorbell interrupt setting and applied different
settings for BACO reset for RAS recovery.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: enable S/G for RAVEN chip"

This reverts commit 1c4259159132ae4ceaf7c6db37a6cf76417f73d9.

S/G display is not stable with the IOMMU enabled on some
platforms.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable gfxoff on original raven

There are still combinations of sbios and firmware that
are not stable.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove experimental flag for Navi14

5.4 and newer works fine with navi14.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable gfxoff when using register read interface

When gfxoff is enabled, accessing gfx registers via MMIO
can lead to a hang.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497
Acked-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)

So that the setting reflects what the hw supports. This will
be used in a subsequent patch so needs to be correct.

v2: squash in fix from Colin Ian King

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: return errno code to caller when error occur

return errno code to caller when error occur, and meanwhile
remove gcc '-Wunused-but-set-variable' warning.

drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c: In function vegam_populate_smc_boot_level:
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c:1364:6: warning: variable result set but not used [-Wunused-but-set-variable]

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove not needed memset

Fixes coccicheck warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c:64:13-31: WARNING: dma_alloc_coherent use in ih -> ring already zeroes out memory,  so memset is not needed

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2

The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address.  This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always
be safe.

Fixes: 27ae10641e9c ("drm/amdgpu: add interupt handler implementation for si v3")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix bad DMA from INTERRUPT_CNTL2

The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address.  This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always
be safe.

Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove set but not used variable 'tv_pll_cntl1'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/radeon/radeon_legacy_tv.c: In function radeon_legacy_tv_mode_set:
drivers/gpu/drm/radeon/radeon_legacy_tv.c:538:24: warning: variable tv_pll_cntl1 set but not used [-Wunused-but-set-variable]

It is introduced by commit 4ce001abafaf ("drm/radeon/kms:
add initial radeon tv-out support."), but never used,
so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove set but not used variable 'blocks'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/radeon/radeon_combios.c: In function radeon_combios_get_power_modes:
drivers/gpu/drm/radeon/radeon_combios.c:2638:10: warning: variable blocks set but not used [-Wunused-but-set-variable]

It is introduced by commit 56278a8edace ("drm/radeon/kms:
pull power mode info from bios tables (v3)"), but never used,
so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove set but not used variable 'radeon_connector'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/radeon/radeon_display.c: In function radeon_crtc_scaling_mode_fixup:
drivers/gpu/drm/radeon/radeon_display.c:1685:27: warning: variable radeon_connector set but not used [-Wunused-but-set-variable]

It is not used since commit 377bd8a98d7d ("drm/radeon:
use a fetch function to get the edid")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove set but not used variable 'dig_connector'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/radeon/atombios_dp.c: In function radeon_dp_get_panel_mode:
drivers/gpu/drm/radeon/atombios_dp.c:415:36: warning: variable dig_connector set but not used [-Wunused-but-set-variable]

It is not used since commit 379dfc25e257 ("drm/radeon/dp:
switch to the common i2c over aux code")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove set but not used variable 'backbias_response_time'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/radeon/si_dpm.c: In function si_program_response_times:
drivers/gpu/drm/radeon/si_dpm.c:3640:29: warning: variable backbias_response_time set but not used [-Wunused-but-set-variable]

It is introduced by commit a9e61410921b ("drm/radeon/kms:
add dpm support for SI (v7)"), but never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove set but not used variable 'size', 'relocs_chunk'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/radeon/r600_cs.c: In function r600_cs_track_validate_cb:
drivers/gpu/drm/radeon/r600_cs.c:353:22: warning: variable size set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/radeon/r600_cs.c: In function r600_cs_track_validate_db:
drivers/gpu/drm/radeon/r600_cs.c:520:27: warning: variable size set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/radeon/r600_cs.c: In function r600_dma_cs_next_reloc:
drivers/gpu/drm/radeon/r600_cs.c:2345:26: warning: variable relocs_chunk set but not used [-Wunused-but-set-variable]

The first 'size' is not used since commit f30df2fad0c9 ("drm/radeon/r600:
fix tiling issues in CS checker.")

The second 'size' is introduced by commit 88f50c80748b ("drm/radeon/kms:
add htile support to the cs checker v3"), but never used, so remove it.

'relocs_chunk' is not used since commit 9305ede6afe2 ("radeon/kms:
fix dma relocation checking")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix coding error in connector atomic check

[why]
For MST connector atomic check we have to check a new CRTC state
instead of an old one, when checking if CRTC is disabled to
release VCPI slots allocated.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix static analysis bug in validate_bksv

[Why]
static analysis throws the error below

Out-of-bounds read (OVERRUN)
Overrunning array of 5 bytes at byte offset 7 by dereferencing pointer
(uint64_t *)hdcp->auth.msg.hdcp1.bksv.

var n is going to contain  r0p and bcaps. if they are non-zero the count
will be wrong

How]
Use memcpy instead to avoid this.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: split rxstatus for hdmi and dp

[Why]
Currently we share rxstatus between HDMI and DP, so we use 16bits
The drm defines work with 1bytes at a time. So we need to
split the HDMI rxstatus into 2bytes before we can use drm defines

[How]
-create rxstatus for dp and hdmi. rxstatus for hdmi is split into bytes
using arrays.
-use drm_hdcp defines for the remaining structs

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use drm defines for MAX CASCADE MASK

[Why]
drm already has this define

[How]
drm Mask is 0x08 vs 0x0800. The reason is because drm mask
works on a byte.        ^^
                 =======||
                 ||
Since the first byte is always zero we can ignore it and only check the
second byte.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add and use defines from drm_hdcp.h

[Why]
These defines/macros exist already no need to redefine them

[How]
Use the defines/macros from drm_hdcp.h

-we share the rxstatus between HDMI and DP (2 bytes), But upstream
defines/macros for HDMI are for 1 byte. So we need to create a separate
rxstatus for HDMI

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor HDCP encryption status update

[Why]
The old way was to poll PSP and update the properties. But due to a
limitation in the PSP interface this doesn't work for MST.

[How]
According to PSP if set_encryption return success, the link is encrypted
and the only way it will not be is if we get a link loss(which we handle
already).

So this method should be good enough to report HDCP status.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add force Type0/1 flag

[Why]
Before we had a disable_type1 flag, this forced HDCP 2.2 to type0
There was no way to force type1.

[How]
Remove disable_type1 flag and instead add a flag to force type0/1.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor HDCP to handle multiple displays per link

[Why]
We need to do this to support HDCP over MST

Currently we save a display per link, in a MST case we need to save
multiple displays per link.

[How]
We can create an array per link to cache the displays, but it
complicates the design. Instead we can use the module to cache the
displays.

Now we will always add all the displays to the module, but we use the
adjustment flag to disable hdcp on all of them before they are added.

When we want to enable hdcp we just query the display(cache), remove
it then add it back with different adjustments. Its the similar for
disable.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle hdcp2.2 type0/1 in dm

[Why]
HDCP 2.2 uses type0 and type1 content type. This is passed to the receiver
to stream the proper content.

For example, in a MST case if the main
device is HDCP2.2 capable but the secondary device is only 1.4 capabale
we can use Type0

Type0 content: use HDCP 1.4 or HDCP2.2 type0
Type1 content: Only use HDCP 2.2 type1

[How]
We use the "hdcp content type" property in drm. We use the
disable_type1 flag in hdcp module to select the type based on the
properties.

For updating the property we use the same logic as 1.4, but now we
consider content_type as well and update the property if the
requirements are met

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable HDCP 2.2

[Why]
HDCP 2.2 was disabled, we need to enable it

[How]
-Update display topology to support 2.2
-Unset hdcp2.disable in update_config
-Change logic of event_update_property, now we set the property to be
ENABLED for any level of encryption (2.2 or 1.4).

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change ERROR to WARN for HDCP module

[Why]
HDCP is a bit finicky so we try it 3 times, this leads to a case where
if we fail the first time and pass the second time the error is still
shown in dmesg for the first failed attempt.

This leads to false positive errors.

[How]
Change the logging from ERROR to WARNING. Warnings are still shown in dmesg
to know what went wrong.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add logging for HDCP2.2

[Why]
We need to log the state changes for 2.2
This patch extends the existing logging functions to handle
HDCP2.2.

[How]
We do this by adding if/else in the defines, and output the log
 based on the hdcp version

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add execution and transition states for HDCP2.2

The module works like a state machine

                                    +-------------+
                            ------> | Execution.c | ------
                            |       +-------------+       |
                            |                             V
    +----+              +--------+                 +--------------+
    | DM |    ----->    | Hdcp.c |  <------------  | Transition.c |
    +----+    <-----    +--------+                 +--------------+

This patch adds the execution and transition files for 2.2

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DDC handles for HDCP2.2

[Why]
We need these to read and write to aux/i2c, during
authentication

[How]
Create read/write functions for all the steps
(Eg, h_prime, paring_info etc)

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add PSP block to verify HDCP2.2 steps

[Why]
All the HDCP transactions should be verified using PSP

[How]
This patch adds the psp calls we need to verify the steps

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Navi10 DMUB VBIOS code

[Why]
We need some extra dmub_cmd_type for NV10

[How]
Add command table functions in DMUB firmware.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Xiong Yan <Xiong.Yan@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DSC 422Native debug option

[Why]
Need to be able to enable native 422 for debugging purposes.

[How]
Add new dc_debug_options bool and check it in the get_dsc_enc_caps
function.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use a temporary copy of the current state when updating DSC config

[why]
When updating DSC config, a new config has to be validated before proceeding
with applying the update. Validation, however, modifies the current state.
This means DSC config validation would affect pipe re-assignment, causing
intermittent screen corruption issues when ODM is required for DSC.

[how]
- Use a copy of the current state for modified DSC config validation
- Set the update type to FULL_UPDATE to correctly validate and set the
  actual state used for committing the streams

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Spin for DMCUB PHY init in DC

[Why]
DCN will hang if we access registers before PHY init is done.

So we need to spin or abort.

[How]
On hardware with DMCUB running and working we shouldn't time out
waiting for this to finish and we shouldn't hit the spin cycle.

If there's no hardware support then we should exit out of the function
early assuming that PHY init was already done elsewhere.

If we hit the timeout then there's likely a bug in firmware or software
and we need to debug - add errors and asserts as appropriate.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DML Validation Dump/Check with Logging

[Why]
Need validation that we are programming the expected values (rq, ttu, dlg)
from DML. This debug feature will output logs if we are programming
incorrect values and may help differentiate DAL issues from HW issues.

[How]
Dump relevant registers for each pipe with active stream. Compare current
reg values with the converted DML output. Log mismatches when found.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: cleanup of function pointer tables

[Why]
It is becoming increasingly hard to figure out which
function is called on the different DCN versions

[How]
1. Make function pointer table init in its own init.c file
2. Remove other scenarios in hwseq.c file that need to
include headers of other DCN versions. (If needed,
it should have been done via the function pointers)

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't spin forever waiting for DMCUB phy/auto init

[Why]
It's an interface violation to use infinite loops within DMUB
service functions and we'll lock up the kernel by doing so.

[How]
Revert the function back to its intended functionality.
Move the infinite loops into DC/DM as necessary.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid conflict between HDR multiplier and 3dlut

[WHY]
There can be a conflict between OS HDR multiplier and 3dlut HDR
multiplier, which are both sent to DC.

[HOW]
Instead of having dc determine which HDR multiplier to use, make the
decision in dm and send only the intended value in a surface update.
Store the current OS HDR multiplier and determine whether to use it or
the 3dlut's multiplier before sending the surface update to dc. Send
multiplier to dc in fixed31_32 format, dc then converts it to hw format.

Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debugfs sdp hook up function for Navi

[why]
need to send immediate SDP message via debugfs on Navi board.

[how]
hook up the DCN1x encoder function of sending immediate sdp
message to DCN2.

Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.60

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug trace for dmcub FW autoload.

[Why & How]
1. Add trace code enum for easy debugging.
2. Add trace during uC boot up, including loading phy FW
   and dmcu FW.
3. Change cache memory type back to write back,
   since write through has issue when resume from S0i3 100% hang after
   3.2ms.
4. Change CW3 base address to hard code value to avoid memory overlap
   with cw1.
5. Change polling phy init done to infinite loop to avoid dcn hang when
   dmcub uC stalled.
6. Add dmcub FW dis-assembly file to repositatory for debug purpose.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust DML workaround threshold

[Why]
There is a case where the margin is between 50 and 60, but applying the
workaround causes a hang. By increasing the threshold, we are blocking more
cases from switching p-state during active, but those cases will fall back
to switching during blank, which is fine.

[How]
 - increase required margin from 50 to 60

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add color space option when sending link test pattern

[why]
In the TEST_MSIC dpcd register field definition, the test equipment
has the option to choose between YCbCr601 or YCbCr709.
We will apply corresponding YCbCr coefficient based on this test
request.

[how]
Add a new input parameter in dc_link_dp_set_test_pattern to allow the
selection between different color space.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: cleanup of construct and destruct funcs

[Why]
Too many construct functions which makes searching
difficult, especially on some debuggers.

[How]
Append all construct and destruct functions with dcn
number and object type to make each construct function
name unique

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix debugfs on MST connectors

[why]
Previous patch allowed to initialize debugfs entries on both MST
and SST connectors, but MST connectors get registered much later
which exposed an issue of debugfs entries being initialized in the
same folder.

[how]
Return SST debugfs entries' initialization back to where it was.
For MST connectors we should initialize debugfs entries in connector
register function after the connector is registered.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: revert change causing DTN hang for RV

[Why]
Hanging on RV for DTN driver verifier

[How]
Roll back change and investigate further

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up some code with unused registers

[Why]
Unused register in the code

[How]
Remove unused register

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Connect DIG FE to its BE before link training starts

[why]
In SST mode no idle pattern will be generated after link training if
DIG FE is not connected to DIG BE.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debugfs initalization on mst connectors

[why]
We were missing debugfs files on MST connectors as the files
weren't initialized.

[how]
Move connector debugfs initialization into connoctor's
init helper function so it will be called by both SST and MST
connectors. Also move connector registration so it will be
registered before we create the entries.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DMUB param to load inst const from driver

[Why]
By default we shouldn't be trying to write secure registers during
DMUB hardware init.

[How]
Add a parameter to control whether we put the DMCUB into secure reset
and attempt to load CW0/CW1.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DMUB service function check if hw initialized

[Why]
We want to avoid reprogramming the cache window when possible.

We don't need to worry about it for S3 but we *do* need to worry about
it for S4 resume.

DM can check whether hardware should be reinitialized or store software
state when going to S4 to know whether we need to reprogram hardware.

[How]
Add helpers to the DMUB service to check hardware initialization state.

DM will hook it up later.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Changes in dc to allow full update in some cases

Changes in dc to allow for different cases where full update is
required.

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>