Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:59 +0000 (23:03 +0100)]
vfio/migration: Make x-migration-multifd-transfer VFIO property mutable
DEFINE_PROP_ON_OFF_AUTO() property isn't runtime-mutable so using it
would mean that the source VM would need to decide upfront at startup
time whether it wants to do a multifd device state transfer at some
point.
Source VM can run for a long time before being migrated so it is
desirable to have a fallback mechanism to the old way of transferring
VFIO device state if it turns to be necessary.
This brings this property to the same mutability level as ordinary
migration parameters, which too can be adjusted at the run time.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/f2f2d66bda477da3e6cb8c0311006cff36e8651d.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:58 +0000 (23:03 +0100)]
vfio/migration: Add x-migration-multifd-transfer VFIO property
This property allows configuring whether to transfer the particular device
state via multifd channels when live migrating that device.
It defaults to AUTO, which means that VFIO device state transfer via
multifd channels is attempted in configurations that otherwise support it.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/d6dbb326e3d53c7104d62c96c9e3dd64e1c7b940.1741124640.git.maciej.szmigiero@oracle.com
[ clg: Added documentation ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:57 +0000 (23:03 +0100)]
vfio/migration: Multifd device state transfer support - send side
Implement the multifd device state transfer via additional per-device
thread inside save_live_complete_precopy_thread handler.
Switch between doing the data transfer in the new handler and doing it
in the old save_state handler depending if VFIO multifd transfer is enabled
or not.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/4d727e2e0435e0022d50004e474077632830e08d.1741124640.git.maciej.szmigiero@oracle.com
[ clg: - Reordered savevm_vfio_handlers
- Updated save_live_complete_precopy* documentation ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:56 +0000 (23:03 +0100)]
vfio/migration: Multifd device state transfer support - config loading support
Load device config received via multifd using the existing machinery
behind vfio_load_device_config_state().
Also, make sure to process the relevant main migration channel flags.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/5dbd3f3703ec1097da2cf82a7262233452146fee.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:55 +0000 (23:03 +0100)]
migration/qemu-file: Define g_autoptr() cleanup function for QEMUFile
Automatic memory management helps avoid memory safety issues.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/2fd01d773a783d572dcf538a064a98cc09e75c12.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:54 +0000 (23:03 +0100)]
vfio/migration: Multifd device state transfer support - load thread
Add a thread which loads the VFIO device state buffers that were received
via multifd.
Each VFIO device that has multifd device state transfer enabled has one
such thread, which is created using migration core API
qemu_loadvm_start_load_thread().
Since it's important to finish loading device state transferred via the
main migration channel (via save_live_iterate SaveVMHandler) before
starting loading the data asynchronously transferred via multifd the thread
doing the actual loading of the multifd transferred data is only started
from switchover_start SaveVMHandler.
switchover_start handler is called when MIG_CMD_SWITCHOVER_START
sub-command of QEMU_VM_COMMAND is received via the main migration channel.
This sub-command is only sent after all save_live_iterate data have already
been posted so it is safe to commence loading of the multifd-transferred
device state upon receiving it - loading of save_live_iterate data happens
synchronously in the main migration thread (much like the processing of
MIG_CMD_SWITCHOVER_START) so by the time MIG_CMD_SWITCHOVER_START is
processed all the proceeding data must have already been loaded.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/9abe612d775aaf42e31646796acd2363c723a57a.1741124640.git.maciej.szmigiero@oracle.com
[ clg: - Reordered savevm_vfio_handlers
- Added switchover_start documentation ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:53 +0000 (23:03 +0100)]
vfio/migration: Multifd device state transfer support - received buffers queuing
The multifd received data needs to be reassembled since device state
packets sent via different multifd channels can arrive out-of-order.
Therefore, each VFIO device state packet carries a header indicating its
position in the stream.
The raw device state data is saved into a VFIOStateBuffer for later
in-order loading into the device.
The last such VFIO device state packet should have
VFIO_DEVICE_STATE_CONFIG_STATE flag set and carry the device config state.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/e3bff515a8d61c582b94b409eb12a45b1a143a69.1741124640.git.maciej.szmigiero@oracle.com
[ clg: - Reordered savevm_vfio_handlers
- Added load_state_buffer documentation ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:52 +0000 (23:03 +0100)]
vfio/migration: Setup and cleanup multifd transfer in these general methods
Wire VFIO multifd transfer specific setup and cleanup functions into
general VFIO load/save setup and cleanup methods.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/b1f864a65fafd4fdab1f89230df52e46ae41f2ac.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:51 +0000 (23:03 +0100)]
vfio/migration: Multifd setup/cleanup functions and associated VFIOMultifd
Add multifd setup/cleanup functions and an associated VFIOMultifd data
structure that will contain most of the receive-side data together
with its init/cleanup methods.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/c0520523053b1087787152ddf2163257d3030be0.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:50 +0000 (23:03 +0100)]
vfio/migration: Multifd device state transfer - add support checking function
Add vfio_multifd_transfer_supported() function that tells whether the
multifd device state transfer is supported.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/8ce50256f341b3d47342bb217cb5fbb2deb14639.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:49 +0000 (23:03 +0100)]
vfio/migration: Multifd device state transfer support - basic types
Add basic types and flags used by VFIO multifd device state transfer
support.
Since we'll be introducing a lot of multifd transfer specific code,
add a new file migration-multifd.c to home it, wired into main VFIO
migration code (migration.c) via migration-multifd.h header file.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/4eedd529e6617f80f3d6a66d7268a0db2bc173fa.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:48 +0000 (23:03 +0100)]
vfio/migration: Move migration channel flags to vfio-common.h header file
This way they can also be referenced in other translation
units than migration.c.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/26a940f6b22c1b685818251b7a3ddbbca601b1d6.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:47 +0000 (23:03 +0100)]
vfio/migration: Add vfio_add_bytes_transferred()
This way bytes_transferred can also be incremented in other translation
units than migration.c.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/d1fbc27ac2417b49892f354ba20f6c6b3f7209f8.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:46 +0000 (23:03 +0100)]
vfio/migration: Convert bytes_transferred counter to atomic
So it can be safety accessed from multiple threads.
This variable type needs to be changed to unsigned long since
32-bit host platforms lack the necessary addition atomics on 64-bit
variables.
Using 32-bit counters on 32-bit host platforms should not be a problem
in practice since they can't realistically address more memory anyway.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/dc391771d2d9ad0f311994f0cb9e666da564aeaf.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:45 +0000 (23:03 +0100)]
vfio/migration: Add load_device_config_state_start trace event
And rename existing load_device_config_state trace event to
load_device_config_state_end for consistency since it is triggered at the
end of loading of the VFIO device config state.
This way both the start and end points of particular device config
loading operation (a long, BQL-serialized operation) are known.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/1b6c5a2097e64c272eb7e53f9e4cca4b79581b38.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:44 +0000 (23:03 +0100)]
migration: Add save_live_complete_precopy_thread handler
This SaveVMHandler helps device provide its own asynchronous transmission
of the remaining data at the end of a precopy phase via multifd channels,
in parallel with the transfer done by save_live_complete_precopy handlers.
These threads are launched only when multifd device state transfer is
supported.
Management of these threads in done in the multifd migration code,
wrapping them in the generic thread pool.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/qemu-devel/eac74a4ca7edd8968bbf72aa07b9041c76364a16.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:43 +0000 (23:03 +0100)]
migration/multifd: Add multifd_device_state_supported()
Since device state transfer via multifd channels requires multifd
channels with packets and is currently not compatible with multifd
compression add an appropriate query function so device can learn
whether it can actually make use of it.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/1ff0d98b85f470e5a33687406e877583b8fab74e.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Peter Xu [Tue, 4 Mar 2025 22:03:42 +0000 (23:03 +0100)]
migration/multifd: Make MultiFDSendData a struct
The newly introduced device state buffer can be used for either storing
VFIO's read() raw data, but already also possible to store generic device
states. After noticing that device states may not easily provide a max
buffer size (also the fact that RAM MultiFDPages_t after all also want to
have flexibility on managing offset[] array), it may not be a good idea to
stick with union on MultiFDSendData.. as it won't play well with such
flexibility.
Switch MultiFDSendData to a struct.
It won't consume a lot more space in reality, after all the real buffers
were already dynamically allocated, so it's so far only about the two
structs (pages, device_state) that will be duplicated, but they're small.
With this, we can remove the pretty hard to understand alloc size logic.
Because now we can allocate offset[] together with the SendData, and
properly free it when the SendData is freed.
[MSS: Make sure to clear possible device state payload before freeing
MultiFDSendData, remove placeholders for other patches not included]
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/7b02baba8e6ddb23ef7c349d312b9b631db09d7e.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:41 +0000 (23:03 +0100)]
migration/multifd: Device state transfer support - send side
A new function multifd_queue_device_state() is provided for device to queue
its state for transmission via a multifd channel.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/ebd55768d3e5fecb5eb3f197bad9c0c07e5bc084.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:40 +0000 (23:03 +0100)]
migration/multifd: Add an explicit MultiFDSendData destructor
This way if there are fields there that needs explicit disposal (like, for
example, some attached buffers) they will be handled appropriately.
Add a related assert to multifd_set_payload_type() in order to make sure
that this function is only used to fill a previously empty MultiFDSendData
with some payload, not the other way around.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/6755205f2b95abbed251f87061feee1c0e410836.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:39 +0000 (23:03 +0100)]
migration/multifd: Make multifd_send() thread safe
multifd_send() function is currently not thread safe, make it thread safe
by holding a lock during its execution.
This way it will be possible to safely call it concurrently from multiple
threads.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/dd0f3bcc02ca96a7d523ca58ea69e495a33b453b.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:38 +0000 (23:03 +0100)]
migration/multifd: Device state transfer support - receive side
Add a basic support for receiving device state via multifd channels -
channels that are shared with RAM transfers.
Depending whether MULTIFD_FLAG_DEVICE_STATE flag is present or not in the
packet header either device state (MultiFDPacketDeviceState_t) or RAM
data (existing MultiFDPacket_t) is read.
The received device state data is provided to
qemu_loadvm_load_state_buffer() function for processing in the
device's load_state_buffer handler.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/9b86f806c134e7815ecce0eee84f0e0e34aa0146.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:37 +0000 (23:03 +0100)]
migration/multifd: Split packet into header and RAM data
Read packet header first so in the future we will be able to
differentiate between a RAM multifd packet and a device state multifd
packet.
Since these two are of different size we can't read the packet body until
we know which packet type it is.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/832ad055fe447561ac1ad565d61658660cb3f63f.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:36 +0000 (23:03 +0100)]
migration: Add thread pool of optional load threads
Some drivers might want to make use of auxiliary helper threads during VM
state loading, for example to make sure that their blocking (sync) I/O
operations don't block the rest of the migration process.
Add a migration core managed thread pool to facilitate this use case.
The migration core will wait for these threads to finish before
(re)starting the VM at destination.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/b09fd70369b6159c75847e69f235cb908b02570c.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:35 +0000 (23:03 +0100)]
error: define g_autoptr() cleanup function for the Error type
Automatic memory management helps avoid memory safety issues.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/a5843c5fa64d7e5239a4316092ec0ef0d10c2320.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Wed, 5 Mar 2025 16:49:10 +0000 (17:49 +0100)]
migration: Always take BQL for migration_incoming_state_destroy()
All callers to migration_incoming_state_destroy() other than
postcopy_ram_listen_thread() do this call with BQL held.
Since migration_incoming_state_destroy() ultimately calls "load_cleanup"
SaveVMHandlers and it will soon call BQL-sensitive code it makes sense
to always call that function under BQL rather than to have it deal with
both cases (with BQL and without BQL).
Add the necessary bql_lock() and bql_unlock() to
postcopy_ram_listen_thread().
qemu_loadvm_state_main() in postcopy_ram_listen_thread() could call
"load_state" SaveVMHandlers that are expecting BQL to be held.
In principle, the only devices that should be arriving on migration
channel serviced by postcopy_ram_listen_thread() are those that are
postcopiable and whose load handlers are safe to be called without BQL
being held.
But nothing currently prevents the source from sending data for "unsafe"
devices which would cause trouble there.
Add a TODO comment there so it's clear that it would be good to improve
handling of such (erroneous) case in the future.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/21bb5ca337b1d5a802e697f553f37faf296b5ff4.1741193259.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:33 +0000 (23:03 +0100)]
migration: Add qemu_loadvm_load_state_buffer() and its handler
qemu_loadvm_load_state_buffer() and its load_state_buffer
SaveVMHandler allow providing device state buffer to explicitly
specified device via its idstr and instance id.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/71ca753286b87831ced4afd422e2e2bed071af25.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:32 +0000 (23:03 +0100)]
migration: Add MIG_CMD_SWITCHOVER_START and its load handler
This QEMU_VM_COMMAND sub-command and its switchover_start SaveVMHandler is
used to mark the switchover point in main migration stream.
It can be used to inform the destination that all pre-switchover main
migration stream data has been sent/received so it can start to process
post-switchover data that it might have received via other migration
channels like the multifd ones.
Add also the relevant MigrationState bit stream compatibility property and
its hw_compat entry.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhang Chen <zhangckid@gmail.com> # for the COLO part
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/311be6da85fc7e49a7598684d80aa631778dcbce.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:31 +0000 (23:03 +0100)]
thread-pool: Implement generic (non-AIO) pool support
Migration code wants to manage device data sending threads in one place.
QEMU has an existing thread pool implementation, however it is limited
to queuing AIO operations only and essentially has a 1:1 mapping between
the current AioContext and the AIO ThreadPool in use.
Implement generic (non-AIO) ThreadPool by essentially wrapping Glib's
GThreadPool.
This brings a few new operations on a pool:
* thread_pool_wait() operation waits until all the submitted work requests
have finished.
* thread_pool_set_max_threads() explicitly sets the maximum thread count
in the pool.
* thread_pool_adjust_max_threads_to_work() adjusts the maximum thread count
in the pool to equal the number of still waiting in queue or unfinished work.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/b1efaebdbea7cb7068b8fb74148777012383e12b.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:30 +0000 (23:03 +0100)]
thread-pool: Rename AIO pool functions to *_aio() and data types to *Aio
These names conflict with ones used by future generic thread pool
equivalents.
Generic names should belong to the generic pool type, not specific (AIO)
type.
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/70f9e0fb4b01042258a1a57996c64d19779dc7f0.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:29 +0000 (23:03 +0100)]
thread-pool: Remove thread_pool_submit() function
This function name conflicts with one used by a future generic thread pool
function and it was only used by one test anyway.
Update the trace event name in thread_pool_submit_aio() accordingly.
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/6830f07777f939edaf0a2d301c39adcaaf3817f0.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maciej S. Szmigiero [Tue, 4 Mar 2025 22:03:28 +0000 (23:03 +0100)]
migration: Clarify that {load, save}_cleanup handlers can run without setup
It's possible for {load,save}_cleanup SaveVMHandlers to get called without
the corresponding {load,save}_setup handler being called first.
One such example is if {load,save}_setup handler of a proceeding device
returns error.
In this case the migration core cleanup code will call all corresponding
cleanup handlers, even for these devices which haven't had its setup
handler called.
Since this behavior can generate some surprises let's clearly document it
in these SaveVMHandlers description.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/991636623fb780350f493b5f045cb17e13ce4c0f.1741124640.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Wed, 5 Mar 2025 12:42:25 +0000 (13:42 +0100)]
vfio-platform: Deprecate all forms of vfio-platform devices
As an outcome of KVM forum 2024 "vfio-platform: live and let die?"
talk, let's deprecate vfio-platform devices.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250305124225.952791-1-eric.auger@redhat.com
[ clg: Fixed spelling in vfio-amd-xgbe section ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Tomita Moeko [Thu, 27 Feb 2025 16:27:41 +0000 (00:27 +0800)]
MAINTAINERS: Add myself as vfio-igd maintainer
As suggested by Cédric, I'm glad to be a maintainer of vfio-igd.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250227162741.9860-1-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Alex Williamson [Tue, 25 Feb 2025 21:52:29 +0000 (14:52 -0700)]
hw/vfio/pci: Re-order pre-reset
We want the device in the D0 power state going into reset, but the
config write can enable the BARs in the address space, which are
then removed from the address space once we clear the memory enable
bit in the command register. Re-order to clear the command bit
first, so the power state change doesn't enable the BARs.
Cc: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-6-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Alex Williamson [Tue, 25 Feb 2025 21:52:28 +0000 (14:52 -0700)]
pcie, virtio: Remove redundant pm_cap
The pm_cap on the PCIExpressDevice object can be distilled down
to the new instance on the PCIDevice object.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-5-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Alex Williamson [Tue, 25 Feb 2025 21:52:27 +0000 (14:52 -0700)]
vfio/pci: Delete local pm_cap
This is now redundant to PCIDevice.pm_cap.
Cc: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-4-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Alex Williamson [Tue, 25 Feb 2025 21:52:26 +0000 (14:52 -0700)]
pci: Use PCI PM capability initializer
Switch callers directly initializing the PCI PM capability with
pci_add_capability() to use pci_pm_init().
Cc: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Klaus Jensen <its@irrelevant.dk>
Cc: Jesper Devantier <foss@defmacro.it>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-3-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Alex Williamson [Tue, 25 Feb 2025 21:52:25 +0000 (14:52 -0700)]
hw/pci: Basic support for PCI power management
The memory and IO BARs for devices are only accessible in the D0 power
state. In other power states the PCI spec defines that the device
responds to TLPs and messages with an Unsupported Request response.
To approximate this behavior, consider the BARs as unmapped when the
device is not in the D0 power state. This makes the BARs inaccessible
and has the additional bonus for vfio-pci that we don't attempt to DMA
map BARs for devices in a non-D0 power state.
To support this, an interface is added for devices to register the PM
capability, which allows central tracking to enforce valid transitions
and unmap BARs in non-D0 states.
NB. We currently have device models (eepro100 and pcie_pci_bridge)
that register a PM capability but do not set wmask to enable writes to
the power state field. In order to maintain migration compatibility,
this new helper does not manage the wmask to enable guest writes to
initiate a power state change. The contents and write access of the
PM capability are still managed by the caller.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-2-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Cédric Le Goater [Fri, 14 Feb 2025 16:19:36 +0000 (17:19 +0100)]
vfio/ccw: Replace warn_once_pfch() with warn_report_once()
Use the common helper warn_report_once() instead of implementing its
own.
Cc: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250214161936.1720039-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Cédric Le Goater [Mon, 17 Feb 2025 17:34:55 +0000 (18:34 +0100)]
vfio: Add property documentation
Investigate the git history to uncover when and why the VFIO
properties were introduced and update the models. This is mostly
targeting vfio-pci device, since vfio-platform, vfio-ap and vfio-ccw
devices are simpler.
Sort the properties based on the QEMU version in which they were
introduced.
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # vfio-ccw
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250217173455.449983-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Stefan Hajnoczi [Wed, 5 Mar 2025 13:58:23 +0000 (21:58 +0800)]
Merge tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging
UI-related for 10.0
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmfH8VIcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5fpaD/41MyK8mvNINCBh/zNs
# BttToR+P2OKDdJcg+fiq8nSaBOqk8TnxWNdfKhd8bdPY3yD56zGzgYhZVLm+d0a6
# a54jkSYLxpM7LL9nKFjLSXDqhmrreU94YGIADzG5WPhndBBHg7ZtHoS5fhlCt4dq
# 0YiPMdQqYf75lSk0w/q+KG+MNX/kA/2Yq2vmxMSRT+DniW7PfcO5MixYfaAs5zJz
# JazcCZTDgbv/DrIsNeaEyMraE3GBnY1fU2obbwoQ2D+eFGA4SpUwjHKZnVkKuD0I
# jYV53BQ+dQMGpN0kmQEyQOj25HvUR5WWlsvSYqHaWupUmg3P+Ne+RaGBUmymgwAU
# FI8SVo9njl/4N8uaSDN76Ed6hpQh+LnnuR0pSDdxLLTef7JwC07009a1tYNeo3gq
# xzTT0NlD8g8oTA/p/2HVAE2nKQME9qK3v3gqfVwZGlPnOBnL2S8+9qO5qK3xHUd0
# g3YwbaKl5aRDs2t2gzrUVEk6VO9TdpllzkskF26YuDmGgPHIU8y0P2TafPgtJ1cI
# emlT06PiNwbJrpOLlLf8SaFXKWgDigt4mTUHg5ZNEDVOfs59qxcTPS1HdSKmA1nP
# x5Zhq4AUFGAxJxziUznFvCYuqwiPqVkiqvrZF2PIAgkBCb0P8JtDbk+6DtTrrP+m
# y2ODr8nH3Oo3hgDk7SOh577NKQ==
# =KDTR
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 14:38:10 HKT
# gpg: using RSA key
87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
chardev: use remoteAddr if the chardev is client
ui/console-vc: implement DCH (delete) and ICH (insert) commands
ui/console-vc: add support for cursor DECSC and DECRC commands
ui/console-vc: report cursor position in the screen not in the scroll buffer
ui/console-vc: report to the application instead of screen rendering
ui/console-vc: introduce parsing of the 'ESC ( <ch>' sequence
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 5 Mar 2025 13:57:15 +0000 (21:57 +0800)]
Merge tag 'pull-loongarch-
20250305' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ8ezJgAKCRAfewwSUazn
# 0T9pAQCKb+C69kbf9cEVg7PU/z5I0ALFtCNWCKxSkWZPDPik4gEA3IYwdrJ+csuX
# 8nWL0fzyk+8+LDzEwEgCYoNcMnttRQw=
# =P8mi
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 10:12:54 HKT
# gpg: using EDDSA key
0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-
20250305' of https://gitlab.com/bibo-mao/qemu:
target/loongarch: Adjust the cpu reset action to a proper position
hw/loongarch/virt: Enable cpu hotplug feature on virt machine
hw/loongarch/virt: Update the ACPI table for hotplug cpu
hw/loongarch/virt: Implement cpu plug interface
hw/loongarch/virt: Implement cpu unplug interface
hw/loongarch/virt: Add basic cpu plug interface framework
hw/loongarch/virt: Add topo properties on CPU object
hw/loongarch/virt: Add CPU topology support
hw/intc/loongarch_extioi: Use cpu plug notification
hw/intc/loongarch_extioi: Implment cpu hotplug interface
hw/intc/loongarch_extioi: Add basic hotplug framework
hw/intc/loongarch_extioi: Move gpio irq initial to common code
hw/intc/loongarch_ipi: Notify ipi object when cpu is plugged
hw/intc/loongarch_ipi: Implment cpu hotplug interface
hw/intc/loongarch_ipi: Add basic hotplug framework
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 5 Mar 2025 13:56:46 +0000 (21:56 +0800)]
Merge tag 'pull-riscv-to-apply-
20250305-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 10.0
* CSR coverity fixes
* Fix unexpected behavior of vector reduction instructions when vl is 0
* Fix incorrect vlen comparison in prop_vlen_set
* Throw debug exception before page fault
* Remove redundant "hart_idx" masking from APLIC
* Add support for Control Transfer Records Ext
* Remove redundant struct members from the IOMMU
* Remove duplicate definitions from the IOMMU
* Fix tick_offset migration for Goldfish RTC
* Add serial alias in virt machine DTB
* Remove Bin Meng from RISC-V maintainers
* Add support for Control Transfer Records Ext
* Log guest errors when reserved bits are set in PTEs
* Add missing Sdtrig disas CSRs
* Correct the hpmevent sscofpmf mask
* Mask upper sscofpmf bits during validation
* Remove warnings about Smdbltrp/Smrnmi being disabled
* Respect mseccfg.RLB bit for TOR mode PMP entry
* Update KVM support to Linux 6.14-rc3
* IOMMU HPM support
* Support Sscofpmf/Svade/Svadu/Smnpm/Ssnpm extensions in KVM
* Add --ignore-family option to binfmt
* Refinement for AIA with KVM acceleration
* Reset time changes for KVM
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmfHrkEACgkQr3yVEwxT
# gBNGTA/+N9nBPZt5cv0E/0EDZMQS8RQrQvz1yHRgAXOq8RnOdcL72v8wovGAfnVu
# l0BXDoVBvw4f2Xm9Q4ptlfH8HAefCeQ4E/K9j5Lwxr8OqZHFg6e+JQIyZOt6wBWI
# hJbz1/laJIbXq3cGgwcE/l0aGfb2UAAsA4dsZVt/MnjAV8GS7BF9RCkgCPxD4FZA
# 0PLiq9dF+4o4q7PxnxAbUVz/uhLzqmcnQemQFHbf9Wms3tZEDKmPSoKP/v+01Rkw
# tm+cgy7OocpgygbMc0nykYG50P+raUBSesk/jFGeKj8cU4IeMuzDsVPWcd4rG+0X
# Z+nENfOY7vOqMCXgaQCW2r4vEQx2Gj0yQG6xmVAemRWzFHJdz5W01/uUSHzJSB+L
# +VbAH55HYKr6sbgecqInQ/rsHKyw6D5QFcj/guz+kvhsH9rJ5q60uywrWL5OEuaK
# vKv7cSZghlf9bwy6soassXxk8z+j4psJ7WnnVpynNKMew9yFFDhayuIFbo9952gH
# 3+NCm2cQrkTYJOXAJwkxBD+I4AXxNSuxNjaVANk9q80uqbT9JiHM7pcvbJI00Fji
# OutJSPYtVXEin9Ev3sJ05YQHsIcZ/Noi3O5IdaRI0AMk/8gyGyhFCVgSpV52dH59
# HguPK05e5cW/xgElGUPHrU+UtzE05p18HnSoVPclF/B5rc8QXN0=
# =dobk
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 09:52:01 HKT
# gpg: using RSA key
6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-
20250305-1' of https://github.com/alistair23/qemu: (59 commits)
target/riscv/kvm: add missing KVM CSRs
target/riscv/kvm: add kvm_riscv_reset_regs_csr()
target/riscv/cpu: remove unneeded !kvm_enabled() check
hw/intc/aplic: refine kvm_msicfgaddr
hw/intc/aplic: refine the APLIC realize
hw/intc/imsic: refine the IMSIC realize
binfmt: Add --ignore-family option
binfmt: Normalize host CPU architecture
binfmt: Shuffle things around
target/riscv/kvm: Add some exts support
docs/specs/riscv-iommu.rst: add HPM support info
hw/riscv: add IOMMU HPM trace events
hw/riscv/riscv-iommu.c: add RISCV_IOMMU_CAP_HPM cap
hw/riscv/riscv-iommu: add hpm events mmio write
hw/riscv/riscv-iommu: add IOHPMCYCLES mmio write
hw/riscv/riscv-iommu: add IOCOUNTINH mmio writes
hw/riscv/riscv-iommu: instantiate hpm_timer
hw/riscv/riscv-iommu: add riscv_iommu_hpm_incr_ctr()
hw/riscv/riscv-iommu: add riscv-iommu-hpm file
hw/riscv/riscv-iommu-bits.h: HPM bits
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 5 Mar 2025 13:54:58 +0000 (21:54 +0800)]
Merge tag 'hw-misc-
20250305' of https://github.com/philmd/qemu into staging
Misc HW patches
- Remove TCG dependency on ARM_GICV3 (Philippe)
- Add MMIO interface to PVPanic device (Alexander)
- Add vmapple machine (Alexander & Phil)
- Restrict part of sPAPR PAGE_INIT hypercall to TCG (Philippe)
- Make ghes_record_cper_errors() scope static (Gavin)
- Do not expose the ARM virt machines on Xen-only binary (Philippe)
- Xen header cleanups (Philippe)
- Set Freescale eTSEC network device description & category (Zoltan)
- Improve RX FIFO depth for various UARTs (Philippe)
- Prevent TX FIFO memory leak in SiFive UART (Alistair)
- Cleanups in MacIO and AT24C EEPROM (Zoltan)
- Add UFS temperature event notification support & test (Keoseong)
- Remove printf() calls in hw/arm/ (Peter)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmfHpagACgkQ4+MsLN6t
# wN4dTg//Z2neoENdnZglRp6q66LLxSTHJnHUMNHe2Bp+KKfhce+//j+CFYgOnJjV
# P5eExzvHvtYFL6lNXOR7MTM/i/4pixcLYh8anyrnUWkEiufGXI4/30QePbwAAdkZ
# kQ1CpLI43ZdnMLTh18JswLo/JMkl/jJGvCGNjhtQVnobqam+ATgAbjmcnwA8esJS
# cCQVFzno9TNvsCnUtMe3IdOfIs9K3atCARbXpA3i3wd52P+NHvGO1jU0QPFBm2Lr
# 4kcFLI1Sg2vYWD3FujDPeCcfI7kcRDIjHS6vVplK1VlCjjdaQmxx6XKO72PnZZOG
# 7sra8xJpW8mZS2jfN2AxKMVlNndZMYzAJoS2UBMp1YX8KBEzlcmI2uSjGas6bcmQ
# XIaP7/mggx7yBU3nspUl8rqY/3Z3wVjwepf1l8KOn9Z13wo+APv4aj6W+zkK96A5
# NGq6EpoKquINGLBBMkZAdfBOKk97NhwHh1Op04VgJNnPESpLnb5hENtZW1ksg92r
# tijWdDWnC/JtWMU2dAnmT/9Vaxk4fukGqqncXqQJzGBw0OylzWh5b2Zer02WFyxz
# oplISEwU3uFcg0OLa9aUHgs7lVWBUbEW3pSk1CtKuqgPtwxm/Gr2KbAVgAbFiyzr
# 6YPQsfFP5z6CjreOWMELPWmsYV+jtTj/KoIek2QlYt7Ex6uiA6c=
# =TcY9
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 09:15:20 HKT
# gpg: using RSA key
FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-
20250305' of https://github.com/philmd/qemu: (41 commits)
hw/nvram/eeprom_at24c: Reorganise init to avoid overwriting values
hw/nvram/eeprom_at24c: Remove memset after g_malloc0
hw/nvram/eeprom_at24c: Remove ERR macro that calls fprintf to stderr
hw/nvram/eeprom_at24c: Use OBJECT_DECLARE_SIMPLE_TYPE
hw/arm/versatilepb: Convert printfs to LOG_GUEST_ERROR
hw/arm/omap_sx1: Remove ifdeffed out debug printf
hw/arm/omap1: Convert information printfs to tracepoints
hw/arm/omap1: Drop ALMDEBUG ifdeffed out code
hw/arm/omap1: Convert raw printfs to qemu_log_mask()
tests/qtest/ufs-test: Add test code for the temperature feature
hw/ufs: Add temperature event notification support
hw/misc/macio/gpio: Add constants for register bits
hw/misc/macio: Improve trace logs
hw/char/sifive_uart: Free fifo on unrealize
hw/char/sh_serial: Return correct number of empty RX FIFO elements
hw/char/mcf_uart: Really use RX FIFO depth
hw/char/mcf_uart: Use FIFO_DEPTH definition instead of magic values
hw/char/imx_serial: Really use RX FIFO depth
hw/char/bcm2835_aux: Really use RX FIFO depth
hw/char/pl011: Really use RX FIFO depth
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 5 Mar 2025 13:53:36 +0000 (21:53 +0800)]
Merge tag 'firmware-
20250304-pull-request' of https://gitlab.com/kraxel/qemu into staging
- add uefi variable store support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmfG9m4ACgkQTLbY7tPo
# cTgk8BAAn60ezSx2iet/JarkMugacOJ6C2UbVQho/Q3WCyrQ7K+F0NByczcfKLA6
# OZX84p93qxiK8KJ9tva41eOIYViyfsKf+wGUInNCbXbyGy7RZV3SjE5Yuk9BE9Ta
# 8f/5dDGyCELQWliy4atLUWl2dL0rQ76twLZewYo9n2A+LijIzjuP+kVJeccK8U7A
# qStio3rGZ0vul2OYhE3+veSXd2m2oU32Tce31MUoj9yCbTE1RZSKMXbwbUU/nul9
# RN3X0q4rvXKwbKMUdC+YI+oIzY/1nzrmy5zwwbJsAszsSKjAc2LZeoDqKdbOIynL
# B01dorpg5pVxQUqHz1t+YTfGyuZaYDM6WsaGoU5/9QLW7ZbI857EULq7ptE3DVAS
# YjHiBYqiiYYrCatV4UT1XjkRjX7W8lTdK2M+8Vh1E5b1pGpfPwuKE4YRGwMMK0Ac
# 5LD9HMxnXIDOT9A6+tGc6GYLfT7YToFA3pHn6WdLlGSowB7sYVZy0/xGe3ABjvzt
# WOl1WDWtHCpYIiROpEl+KkbRilwvbLF/IW7x0Ovfsjyh5ucBFu6ojxgRBcOee4Na
# oeBz5GfpeIoelhWl1aSYIUrFCvN2Q/9EafHRsfTzPoKlD3t/7oLNYtMYloiQpsks
# IPpD5OMMmWGaD2G76Nw24nS4+zUf4Gagg6+IAlYt6zjqnmxFWxY=
# =HnUt
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Mar 2025 20:47:42 HKT
# gpg: using RSA key
A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'firmware-
20250304-pull-request' of https://gitlab.com/kraxel/qemu: (24 commits)
docs: add uefi variable service documentation
hw/uefi: add MAINTAINERS entry
hw/uefi-vars-sysbus: allow for pc and q35
hw/uefi-vars-sysbus: allow for arm virt
hw/uefi-vars-sysbus: add x64 variant
hw/uefi-vars-sysbus: qemu platform bus support
hw/uefi: add uefi-vars-sysbus device
hw/uefi: add to meson
hw/uefi: add UEFI_VARS to Kconfig
hw/uefi: add trace-events
hw/uefi: add var-service-json.c + qapi for NV vars.
hw/uefi: add var-service-siglist.c
hw/uefi: add var-service-pkcs7-stub.c
hw/uefi: add var-service-pkcs7.c
hw/uefi: add var-service-core.c
hw/uefi: add var-service-policy.c
hw/uefi: add var-service-auth.c
hw/uefi: add var-service-vars.c
hw/uefi: add var-service-utils.c
hw/uefi: add var-service-guid.c
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 5 Mar 2025 13:53:11 +0000 (21:53 +0800)]
Merge tag 'pull-qapi-2025-02-26-v2' of https://repo.or.cz/qemu/armbru into staging
QAPI patches patches for 2025-02-26
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmfGpZsSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTGtQQAKmLIHy1c1T1yU6G9MFrAaFvH0n10UnB
# mQGOvcV+8f01KxUUIvVRBD9DyRl+kJGMelZoYuMpt+vNiO5XDMqZarJUYFOYukMW
# 6e/qrD3AMeyI0HGZYtELUENmuKLeAhhdE9d1PO56owR2jiFDxdzW+9TXkEXa1NHS
# c54v1y5HPgIdTXd11aXWI+06S6OVSpBteUOQTiSLowBq5BC28DoFAgViA1jZ1qM+
# 1PxL4IV4QkYXfEW2ORt/auamxFWuLNBYNWnyqhR+OYeQjWWAe2A0cmcoLIHVKFwE
# zcuVCXt9+8nZi3Fyx24yOineAhAi29qWxRnbXLrfa4y8OF3cihY0ZNYxvJF61iel
# Wis9WM78OcuQrHCF3BNPqBm9rrac5mQf5mMk4V75Yc+I4oeJeoDG8cLZF1HMpoBT
# iZAl4aW2aa7JQ778c4RxzuCWQSVzOzm5T72Ez9VDJRAWHxoiumoaIOPW9wDi7jWL
# 2P/XxyVCIMsuNLsxkFQEcHwtyK5BYqSf6gCpCbbzTW1YdfDzXQIvrRx4AEuClQvP
# yoLhpv3HjaomWEZbY26gJq1ImSF4uIaLbdOAvAub9wuZWCW0qd/j8PkU/xy0Q0Jx
# gNoNymbRdN5v3eekcZr7L96ILzwMDp2d+zS3q+YgpYUf30INfC7LyTCg6BZ7b06r
# zT05GmiP5DqS
# =LNhH
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Mar 2025 15:02:51 HKT
# gpg: using RSA key
354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2025-02-26-v2' of https://repo.or.cz/qemu/armbru:
qapi: pluggable backend code generators
docs/qapidoc: remove example section support
docs/qapidoc: support header-less freeform sections
qapi: update pylintrc config
qapi/char.json: minor doc rewording for `hub` device
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Haoqian He [Tue, 25 Feb 2025 10:45:26 +0000 (18:45 +0800)]
chardev: use remoteAddr if the chardev is client
If the chardev is client, the socket file path in localAddr may be NULL.
This is because the socket path comes from getsockname(), according
to man page, getsockname() returns the current address bound by the
socket sockfd. If the chardev is client, it's socket is unbound sockfd.
Therefore, when computing the client chardev socket file path, using
remoteAddr is more appropriate.
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
20250225104526.
2924175-1-haoqian.he@smartx.com>
Roman Penyaev [Wed, 26 Feb 2025 07:59:11 +0000 (08:59 +0100)]
ui/console-vc: implement DCH (delete) and ICH (insert) commands
This patch implements DCH (delete character) and ICH (insert
character) commands.
DCH - Delete Character:
"As characters are deleted, the remaining characters between the
cursor and right margin move to the left. Character attributes move
with the characters. The terminal adds blank spaces with no visual
character attributes at the right margin. DCH has no effect outside
the scrolling margins" [1].
ICH - Insert Character:
"The ICH sequence inserts Pn blank characters with the normal
character attribute. The cursor remains at the beginning of the
blank characters. Text between the cursor and right margin moves to
the right. Characters scrolled past the right margin are lost. ICH
has no effect outside the scrolling margins" [2].
Without these commands console is barely usable.
[1] https://vt100.net/docs/vt510-rm/DCH.html
[1] https://vt100.net/docs/vt510-rm/ICH.html
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
20250226075913.353676-6-r.peniaev@gmail.com>
Roman Penyaev [Wed, 26 Feb 2025 07:59:10 +0000 (08:59 +0100)]
ui/console-vc: add support for cursor DECSC and DECRC commands
There are aliases for save and restore cursor commands:
* save cursor
`ESC 7` (DEC Save Cursor [1], older VT100)
`ESC [ s` (CSI Save Cursor, standard ANSI)
* load cursor
`ESC 8` (DEC Restore Cursor [2], older VT100)
`ESC [ u` (CSI Restore Cursor, standard ANSI)
This change introduces older DEC sequencies for compatibility with
some scripts (for example [3]) and tools.
This change also adds saving and restoring of character attributes,
which is according to the VT spec [1][2]
[1] https://vt100.net/docs/vt510-rm/DECSC.html
[2] https://vt100.net/docs/vt510-rm/DECRC.html
[3] https://wiki.archlinux.org/title/Working_with_the_serial_console#Resizing_a_terminal
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
20250226075913.353676-5-r.peniaev@gmail.com>
Roman Penyaev [Wed, 26 Feb 2025 07:59:09 +0000 (08:59 +0100)]
ui/console-vc: report cursor position in the screen not in the scroll buffer
The format of the CSI cursor position report is `ESC[row;columnR`,
where `row` is a row of a cursor in the screen, not in the scrollback
buffer. What's the difference? Let's say the terminal screen has 24
lines, no matter how long the scrollback buffer may be, the last line
is the 24th.
For example the following command can be executed in xterm on the last
screen line:
$ echo -en '\e[6n'; IFS='[;' read -sdR _ row col; echo $row:$col
24:1
It shows the cursor position on the current screen and not relative
to the backscroll buffer.
Before this change the row number was always increasing for the QEMU
VC and represents the cursor position relative to the backscroll
buffer.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
20250226075913.353676-4-r.peniaev@gmail.com>
Roman Penyaev [Wed, 26 Feb 2025 07:59:08 +0000 (08:59 +0100)]
ui/console-vc: report to the application instead of screen rendering
Terminal Device Status Report (DSR) [1] should be sent to an
application, not rendered to the screen. This patch fixes rendering of
terminal report, which appear only on the graphical screen of the
terminal (console "vc") and can be reproduced by the following
command:
echo -en '\e[6n'; IFS='[;' read -sdR _ row col; echo $row:$col
Command requests cursor position and waits for terminal response, but
instead, the response is rendered to the graphical screen and never
sent to an application.
Why bother? Busybox shell (ash) in Alpine distribution requests cursor
position on each shell prompt (once <ENTER> is pressed), which makes a
prompt on a graphical screen corrupted with repeating Cursor Position
Report (CPR) [2]:
[root@alpine ~]# \033[57;1R]
Which is very annoying and incorrect.
[1] https://vt100.net/docs/vt100-ug/chapter3.html#DSR
[2] https://vt100.net/docs/vt100-ug/chapter3.html#CPR
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
20250226075913.353676-3-r.peniaev@gmail.com>
Roman Penyaev [Wed, 26 Feb 2025 07:59:07 +0000 (08:59 +0100)]
ui/console-vc: introduce parsing of the 'ESC ( <ch>' sequence
This change introduces parsing of the 'ESC ( <ch>' sequence, which is
supposed to change character set [1]. In the QEMU case, the
introduced parsing logic does not actually change the character set, but
simply parses the sequence and does not let output of a tool to be
corrupted with leftovers: `top` sends 'ESC ( B', so if character
sequence is not parsed correctly, chracter 'B' appears in the output:
Btop - 11:08:42 up 5 min, 1 user, load average: 0BB
Tasks:B 158 Btotal,B 1 Brunning,B 157 Bsleeping,B 0 BsBB
%Cpu(s):B 0.0 Bus,B 0.0 Bsy,B 0.0 Bni,B 99.8 Bid,B 0.2 BB
MiB Mem :B 7955.6 Btotal,B 7778.6 Bfree,B 79.6 BB
MiB Swap:B 0.0 Btotal,B 0.0 Bfree,B 0.0 BB
PID USER PR NI VIRT RES SHR S B
B 735 root 20 0 9328 3540 3152 R B
B 1 root 20 0 20084 10904 8404 S B
B 2 root 20 0 0 0 0 S B
[1] https://vt100.net/docs/vt100-ug/chapter3.html#SCS
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
20250226075913.353676-2-r.peniaev@gmail.com>
Xianglai Li [Mon, 3 Mar 2025 06:31:33 +0000 (14:31 +0800)]
target/loongarch: Adjust the cpu reset action to a proper position
The commit
5a99a10da6cf ("target/loongarch: fix vcpu reset command word issue")
fixes the error in the cpu reset ioctl command word delivery process,
so that the command word can be delivered correctly, and adds the judgment
and processing of the error return value, which exposes another problem that
under loongarch, the cpu reset action is earlier than the creation of vcpu.
An error occurs when the cpu reset command is sent.
Now adjust the order of cpu reset and vcpu create actions to fix this problem
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 10 Feb 2025 09:03:29 +0000 (17:03 +0800)]
hw/loongarch/virt: Enable cpu hotplug feature on virt machine
On virt machine, enable CPU hotplug feature has_hotpluggable_cpus. For
hot-added CPUs, there is socket-id/core-id/thread-id property set,
arch_id can be caculated from these properties. So that cpu slot can be
searched from its arch_id.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 10 Feb 2025 08:47:00 +0000 (16:47 +0800)]
hw/loongarch/virt: Update the ACPI table for hotplug cpu
On LoongArch virt machine, ACPI GED hardware is used for CPU hotplug
handler, here CPU hotplug support feature is added based on GED handler,
also CPU scan and reject method is added about CPU device in DSDT table.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 10 Feb 2025 07:21:39 +0000 (15:21 +0800)]
hw/loongarch/virt: Implement cpu plug interface
Implement cpu plug interface, and cold-plug cpu uses plug interface
when cpu object is created.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Wed, 27 Nov 2024 01:58:17 +0000 (09:58 +0800)]
hw/loongarch/virt: Implement cpu unplug interface
Implement cpu unplug interfaces including virt_cpu_unplug_request()
and virt_cpu_unplug().
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 10 Feb 2025 06:56:01 +0000 (14:56 +0800)]
hw/loongarch/virt: Add basic cpu plug interface framework
Add basic cpu hotplug interface framework, cpu hotplug interface is
stub function and only framework is added here.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Wed, 5 Mar 2025 01:27:59 +0000 (09:27 +0800)]
hw/loongarch/virt: Add topo properties on CPU object
Add some properties such as socket_id, core_id, thread_id and node_id
on LoongArch CPU object.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Tue, 26 Nov 2024 08:41:42 +0000 (16:41 +0800)]
hw/loongarch/virt: Add CPU topology support
Add topological relationships for Loongarch VCPU and initialize
topology member variables.
On LoongArch system there is socket/core/thread topo information,
physical CPU id is calculated from CPU topo, every topo sub-field is
aligned by power of 2. So it is different from logical cpu index.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 10 Feb 2025 02:45:13 +0000 (10:45 +0800)]
hw/intc/loongarch_extioi: Use cpu plug notification
Use hotplug_handler_plug() to nofity extioi object when cold-plug
cpu is created, so that extioi can set and configure irq routing
to new cpu.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Fri, 10 Jan 2025 08:38:42 +0000 (16:38 +0800)]
hw/intc/loongarch_extioi: Implment cpu hotplug interface
When cpu is added, connect extioi gpio irq to CPU irq pin.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Fri, 10 Jan 2025 07:35:24 +0000 (15:35 +0800)]
hw/intc/loongarch_extioi: Add basic hotplug framework
LoongArch extioi interrupt controller routes peripheral interrupt
to multiple CPUs, physical cpu id is used in interrupt routing table.
Here hotplug interface is added for extioi object, so that parent irq
line can be connected, and routing table can be added for new created
cpu.
Here only basic hotplug framework is added, it is stub function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Fri, 10 Jan 2025 08:29:47 +0000 (16:29 +0800)]
hw/intc/loongarch_extioi: Move gpio irq initial to common code
When cpu is added, it will connect gpio irq line to cpu irq.
And cpu hot-add is put in common code, move gpio irq initial
part into common code.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 10 Feb 2025 02:19:49 +0000 (10:19 +0800)]
hw/intc/loongarch_ipi: Notify ipi object when cpu is plugged
Use hotplug_handler_plug() to nofity ipi object when cold-plug
cpu is created, so that ipi can set and configure irq routing
to new cpu.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 20 Jan 2025 04:02:30 +0000 (12:02 +0800)]
hw/intc/loongarch_ipi: Implment cpu hotplug interface
Add logic cpu allocation and cpu mapping with cpu hotplug interface.
When cpu is added, connect ipi gpio irq to CPU IRQ_IPI irq pin.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Bibo Mao [Mon, 20 Jan 2025 02:49:19 +0000 (10:49 +0800)]
hw/intc/loongarch_ipi: Add basic hotplug framework
LoongArch ipi can send interrupt to multiple CPUs, interrupt routing
to CPU comes from destination physical cpu id. Here hotplug interface
is added for IPI object, so that parent irq line can be connected, and
routing table can be added for new created cpu.
Here only basic hotplug framework is added, it is stub function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
BALATON Zoltan [Sat, 1 Mar 2025 14:35:36 +0000 (15:35 +0100)]
hw/nvram/eeprom_at24c: Reorganise init to avoid overwriting values
The init_rom[] can write values to the beginning of the memory but
these are overwritten by values from a backing file that covers the
whole memory.
init_rom[] is used only if there's no backing file (provides default
content) but should not overwrite backing file content (especially
leaving the file unchanged and only change it in memory).
Do the init_rom[] handling only if it would not be overwritten.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
fd8e0478febd60d5f48c58bc77c60e043d1c3cdc.
1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Sat, 1 Mar 2025 14:35:35 +0000 (15:35 +0100)]
hw/nvram/eeprom_at24c: Remove memset after g_malloc0
Calling memset to zero memory is not needed after g_malloc0 which
already clears memory. These used to be in separate functions but
after some patches the memset ended up after g_malloc0 and thus can be
dropped.
Fixes: 4f2c6448c3 (hw/nvram/eeprom_at24c: Make reset behavior more like hardware)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
ff281851e6d824ecd01b8b5cd955328dae1515a0.
1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Sat, 1 Mar 2025 14:35:34 +0000 (15:35 +0100)]
hw/nvram/eeprom_at24c: Remove ERR macro that calls fprintf to stderr
In the realize method error_setg can be used like other places there
already do. The other usage can be replaced with error_report which is
the preferred way instead of directly printing to stderr.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
637b92984795a385b648a84208f093947cc261e4.
1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Sat, 1 Mar 2025 14:35:33 +0000 (15:35 +0100)]
hw/nvram/eeprom_at24c: Use OBJECT_DECLARE_SIMPLE_TYPE
No need to open code it so use the simple object type declaration.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
08d9900af04789ede485942c8072eaa58bf52f80.
1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Peter Maydell [Thu, 27 Feb 2025 17:01:17 +0000 (17:01 +0000)]
hw/arm/versatilepb: Convert printfs to LOG_GUEST_ERROR
Convert some printf() calls for attempts to access nonexistent
registers into LOG_GUEST_ERROR logging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20250227170117.
1726895-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Peter Maydell [Thu, 27 Feb 2025 17:01:16 +0000 (17:01 +0000)]
hw/arm/omap_sx1: Remove ifdeffed out debug printf
Remove an ifdeffed out debug printf from the static_write() function in
omap_sx1.c. In theory we could turn this into a tracepoint, but for
code this old it doesn't seem worthwhile. We can add tracepoints if
and when we have a reason to debug something.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <
20250227170117.
1726895-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Peter Maydell [Thu, 27 Feb 2025 17:01:15 +0000 (17:01 +0000)]
hw/arm/omap1: Convert information printfs to tracepoints
The omap1 code uses raw printf() statements to print information
about some events; convert these to tracepoints.
In particular, this will stop the functional test for the sx1
from printing the not-very-helpful note
"omap_clkm_write: clocking scheme set to synchronous scalable"
to the test's default.log.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20250227170117.
1726895-4-peter.maydell@linaro.org>
[PMD: Include component name (pwl/pwt/lpg) in trace events]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Peter Maydell [Thu, 27 Feb 2025 17:01:14 +0000 (17:01 +0000)]
hw/arm/omap1: Drop ALMDEBUG ifdeffed out code
In omap1.c, there are some debug printfs in the omap_rtc_write()
function that are guardad by ifdef ALMDEBUG. ALMDEBUG is never
set, so this is all dead code.
It's not worth the effort of converting all of these to tracepoints;
a modern tracepoint approach would probably have a single tracepoint
covering all the register writes anyway. Just delete the printf()s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20250227170117.
1726895-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Peter Maydell [Thu, 27 Feb 2025 17:01:13 +0000 (17:01 +0000)]
hw/arm/omap1: Convert raw printfs to qemu_log_mask()
omap1.c is very old code, and it contains numerous calls direct to
printf() for various error and information cases.
In this commit, convert the printf() calls that are for either guest
error or unimplemented functionality to qemu_log_mask() calls.
This leaves the printf() calls that are informative or which are
ifdeffed-out debug statements untouched.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20250227170117.
1726895-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Keoseong Park [Tue, 25 Feb 2025 06:42:43 +0000 (15:42 +0900)]
tests/qtest/ufs-test: Add test code for the temperature feature
This commit adds tests to verify the correctness of query attribute
results related to the temperature feature. It ensures that querying
temperature attributes returns expected values.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-ID: <20250225064243epcms2p8b7b59e7bf381bd68d30a6f59b40dea9f@epcms2p8>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Keoseong Park [Tue, 25 Feb 2025 06:41:46 +0000 (15:41 +0900)]
hw/ufs: Add temperature event notification support
This patch introduces temperature event notification support to the UFS
emulation. It enables the emulated UFS device to generate
temperature-related events, including high and low temperature
notifications, in compliance with the UFS specification.
With this feature, UFS drivers can now handle temperature exception events
during testing and development within the emulated environment.
This enhances validation and debugging capabilities for thermal event
handling in UFS implementations.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-ID: <20250225064146epcms2p50889cb0066e2d4734f2386de325bcdf6@epcms2p5>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Mon, 24 Feb 2025 14:10:26 +0000 (15:10 +0100)]
hw/misc/macio/gpio: Add constants for register bits
Add named constants for register bit values that should make it easier
to understand what these mean.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <
20250224141026.
3B36C4E6010@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Sat, 22 Feb 2025 12:28:50 +0000 (13:28 +0100)]
hw/misc/macio: Improve trace logs
Add macio_gpio_read trace event and use that in macio_gpio_read()
instead of macio_gpio_write. Also change log message to match
macio_timer_{read,write}.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20250222122850.
9D8B84E603D@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Alistair Francis [Mon, 3 Mar 2025 02:31:20 +0000 (12:31 +1000)]
hw/char/sifive_uart: Free fifo on unrealize
We previously allocate the fifo on reset and never free it, which means
we are leaking memory.
Instead let's allocate on realize and free on unrealize.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-ID: <
20250303023120.157221-1-alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 15:44:42 +0000 (16:44 +0100)]
hw/char/sh_serial: Return correct number of empty RX FIFO elements
In the IOCanReadHandler sh_serial_can_receive(), if the Serial
Control Register 'Receive Enable' bit is set (bit 4), then we
return a size of (1 << 4) which happens to be equal to 16, so
effectively SH_RX_FIFO_LENGTH.
The IOReadHandler, sh_serial_receive1() takes care to receive
multiple chars, but if the FIFO is partly filled, we only process
the number of free slots in the FIFO, discarding the other chars!
Fix by returning how many elements the FIFO can queue in the
IOCanReadHandler, so we don't have to process more than that in
the IOReadHandler, thus not discarding anything.
Remove the now unnecessary check on 's->rx_cnt < SH_RX_FIFO_LENGTH'
in IOReadHandler, reducing the block indentation.
Fixes: 63242a007a1 ("SH4: Serial controller improvement")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20250220092903.3726-10-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 15:25:17 +0000 (16:25 +0100)]
hw/char/mcf_uart: Really use RX FIFO depth
While we model a 4-elements RX FIFO since the MCF UART model
was introduced in commit
20dcee94833 ("MCF5208 emulation"),
we only read 1 char at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20250220092903.3726-9-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 15:23:44 +0000 (16:23 +0100)]
hw/char/mcf_uart: Use FIFO_DEPTH definition instead of magic values
Defines FIFO_DEPTH and use it, fixing coding style.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20250220092903.3726-8-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 15:23:30 +0000 (16:23 +0100)]
hw/char/imx_serial: Really use RX FIFO depth
While we model a 32-elements RX FIFO since the IMX serial
model was introduced in commit
988f2442971 ("hw/char/imx_serial:
Implement receive FIFO and ageing timer") we only read 1 char
at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <
20250220092903.3726-7-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 15:23:13 +0000 (16:23 +0100)]
hw/char/bcm2835_aux: Really use RX FIFO depth
While we model a 8-elements RX FIFO since the BCM2835 AUX model
was introduced in commit
97398d900ca ("bcm2835_aux: add emulation
of BCM2835 AUX block") we only read 1 char at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20250220092903.3726-6-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 14:37:50 +0000 (15:37 +0100)]
hw/char/pl011: Really use RX FIFO depth
While we model a 16-elements RX FIFO since the PL011 model was
introduced in commit
cdbdb648b7c ("ARM Versatile Platform Baseboard
emulation"), we only read 1 char at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Example of FIFO better used by enabling the pl011 tracing events
and running the tests/functional/test_aarch64_virt.py tests:
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_receive recv 5 chars
pl011_fifo_rx_put RX FIFO push char [0x72] 1/16 depth used
pl011_irq_state irq state 1
pl011_fifo_rx_put RX FIFO push char [0x6f] 2/16 depth used
pl011_fifo_rx_put RX FIFO push char [0x6f] 3/16 depth used
pl011_fifo_rx_put RX FIFO push char [0x74] 4/16 depth used
pl011_fifo_rx_put RX FIFO push char [0x0d] 5/16 depth used
pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
pl011_write addr 0x038 value 0x00000050 reg IMSC
pl011_irq_state irq state 1
pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
pl011_read addr 0x03c value 0x00000030 reg RIS
pl011_write addr 0x044 value 0x00000000 reg ICR
pl011_irq_state irq state 1
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 4/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x00000072 reg DR
pl011_can_receive LCR 0x70, RX FIFO used 4/16, can_receive 12 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 3/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x0000006f reg DR
pl011_can_receive LCR 0x70, RX FIFO used 3/16, can_receive 13 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 2/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x0000006f reg DR
pl011_can_receive LCR 0x70, RX FIFO used 2/16, can_receive 14 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 1/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x00000074 reg DR
pl011_can_receive LCR 0x70, RX FIFO used 1/16, can_receive 15 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 0/16
pl011_irq_state irq state 0
pl011_read addr 0x000 value 0x0000000d reg DR
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_read addr 0x018 value 0x00000090 reg FR
pl011_read addr 0x03c value 0x00000020 reg RIS
pl011_write addr 0x038 value 0x00000050 reg IMSC
pl011_irq_state irq state 0
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_read addr 0x018 value 0x00000090 reg FR
pl011_write addr 0x000 value 0x00000072 reg DR
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20250220092903.3726-5-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 14:37:08 +0000 (15:37 +0100)]
hw/char/pl011: Improve RX flow tracing events
Log FIFO use (availability and depth).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20250220092903.3726-4-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 19 Feb 2025 14:35:53 +0000 (15:35 +0100)]
hw/char/pl011: Simplify a bit pl011_can_receive()
Introduce 'fifo_depth' and 'fifo_available' local variables
to better express the 'r' variable use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20250220092903.3726-3-philmd@linaro.org>
Philippe Mathieu-Daudé [Mon, 22 May 2023 09:05:49 +0000 (11:05 +0200)]
hw/char/pl011: Warn when using disabled receiver
We shouldn't receive characters when the full UART or its
receiver is disabled. However we don't want to break the
possibly incomplete "my first bare metal assembly program"s,
so we choose to simply display a warning when this occurs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-Id: <
20250220092903.3726-2-philmd@linaro.org>
BALATON Zoltan [Tue, 18 Feb 2025 15:54:07 +0000 (16:54 +0100)]
hw/net/fsl_etsec: Set eTSEC device description and category
Add description and set category for eTSEC device so it shows up
better in -device help.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <
20250218155407.
838774E600E@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Philippe Mathieu-Daudé [Tue, 18 Feb 2025 15:57:06 +0000 (16:57 +0100)]
hw/xen/xen-legacy-backend: Remove unused 'net/net.h' header
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <
20250218162618.46167-8-philmd@linaro.org>
Philippe Mathieu-Daudé [Tue, 18 Feb 2025 12:45:19 +0000 (13:45 +0100)]
hw/xen/xen-bus: Reduce included headers
Have "hw/xen/xen-bus" include the bare minimal set of headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <
20250218162618.46167-7-philmd@linaro.org>
Philippe Mathieu-Daudé [Tue, 18 Feb 2025 12:44:57 +0000 (13:44 +0100)]
hw/xen/xen-hvm: Reduce included headers
Have "hw/xen/xen-hvm-common.h" include the bare minimal set
of headers. Adapt sources to avoid errors when refactoring
unrelated headers such:
include/hw/xen/xen-hvm-common.h:71:5: error: unknown type name ‘xenevtchn_handle’
71 | xenevtchn_handle *xce_handle;
| ^~~~~~~~~~~~~~~~
hw/xen/xen-hvm-common.c: In function ‘cpu_get_ioreq’:
hw/xen/xen-hvm-common.c:227:13: error: implicit declaration of function ‘hw_error’
227 | hw_error("Fatal error while trying to get io event!\n");
| ^~~~~~~~
| herror
hw/xen/xen-hvm-common.c: In function ‘handle_ioreq’:
hw/xen/xen-hvm-common.c:446:34: error: ‘target_ulong’ undeclared (first use in this function)
446 | (req->size < sizeof (target_ulong))) {
| ^~~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘xen_add_to_physmap’:
hw/i386/xen/xen-hvm.c:298:22: error: implicit declaration of function ‘xen_replace_cache_entry’
298 | uint8_t *p = xen_replace_cache_entry(phys_offset, start_addr, size);
| ^~~~~~~~~~~~~~~~~~~~~~~
hw/i386/xen/xen-hvm.c:314:9: error: implicit declaration of function 'error_report' is invalid in C99
314 | error_report("relocate_memory %lu pages from GFN %"HWADDR_PRIx
^~~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘xen_log_global_start’:
hw/i386/xen/xen-hvm.c:465:9: error: implicit declaration of function ‘xen_enabled’
465 | if (xen_enabled()) {
| ^~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘regs_to_cpu’:
hw/i386/xen/xen-hvm.c:487:5: error: unknown type name ‘X86CPU’
487 | X86CPU *cpu;
| ^~~~~~
hw/i386/xen/xen-hvm.c:492:15: error: ‘R_EAX’ undeclared (first use in this function)
492 | env->regs[R_EAX] = req->data;
| ^~~~~
| REG_RAX
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <
20250218162618.46167-6-philmd@linaro.org>
Philippe Mathieu-Daudé [Tue, 18 Feb 2025 12:45:11 +0000 (13:45 +0100)]
hw/xen/xen-pvh: Reduce included headers
Have "hw/xen/xen-pvh-common.h" include the bare minimal set
of headers. Adapt sources to avoid errors when refactoring
unrelated headers such:
hw/i386/xen/xen-pvh.c: In function ‘xen_pvh_machine_class_init’:
hw/i386/xen/xen-pvh.c:84:28: error: ‘TARGET_DEFAULT_CPU_TYPE’ undeclared (first use in this function)
84 | mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
| ^~~~~~~~~~~~~~~~~~~~~~~
hw/xen/xen-pvh-common.c: In function ‘xen_pvh_init’:
hw/xen/xen-pvh-common.c:217:43: error: ‘MiB’ undeclared (first use in this function)
217 | if (s->cfg.pci_ecam.size != 256 * MiB) {
| ^~~
hw/xen/xen-hvm-common.c:18:6: error: no previous prototype for ‘xen_mr_is_memory’ [-Werror=missing-prototypes]
18 | bool xen_mr_is_memory(MemoryRegion *mr)
| ^~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <
20250218162618.46167-5-philmd@linaro.org>
Philippe Mathieu-Daudé [Tue, 18 Feb 2025 12:03:13 +0000 (13:03 +0100)]
hw/xen: Link XenPVH with GPEX PCIe bridge
XenPVH requires the PCIe/GPEX device. Add it to Kconfig
to avoid when configuring using --without-default-devices:
/usr/bin/ld: libqemu-aarch64-softmmu.a.p/hw_xen_xen-pvh-common.c.o: in function `xenpvh_gpex_init':
hw/xen/xen-pvh-common.c:174: undefined reference to `gpex_set_irq_num'
/usr/bin/ld: libqemu-aarch64-softmmu.a.p/hw_xen_xen-hvm-common.c.o: in function `pci_dev_bus_num':
include/hw/pci/pci.h:337: undefined reference to `pci_bus_num'
/usr/bin/ld: include/hw/pci/pci.h:337: undefined reference to `pci_bus_num'
/usr/bin/ld: include/hw/pci/pci.h:337: undefined reference to `pci_bus_num'
/usr/bin/ld: include/hw/pci/pci.h:337: undefined reference to `pci_bus_num'
/usr/bin/ld: include/hw/pci/pci.h:337: undefined reference to `pci_bus_num'
/usr/bin/ld: libqemu-aarch64-softmmu.a.p/hw_xen_xen-hvm-common.c.o: in function `cpu_ioreq_config':
hw/xen/xen-hvm-common.c:412: undefined reference to `pci_host_config_read_common'
/usr/bin/ld: hw/xen/xen-hvm-common.c:428: undefined reference to `pci_host_config_read_common'
/usr/bin/ld: hw/xen/xen-hvm-common.c:438: undefined reference to `pci_host_config_write_common'
Fixes: f22e598a72c ("hw/xen: pvh-common: Add support for creating PCIe/GPEX")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <
20250218162618.46167-2-philmd@linaro.org>
Philippe Mathieu-Daudé [Tue, 18 Feb 2025 12:03:18 +0000 (13:03 +0100)]
hw/arm: Do not expose the virt machine on Xen-only binary
Since the Virt machine is useless under Xen, do not even
try to build it there.
A Xen-only binary now only offers the XenPVH machine:
$ qemu-system-aarch64 -M help
Supported machines are:
none empty machine
xenpvh Xen PVH ARM machine
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <
20250218162618.46167-3-philmd@linaro.org>
Gavin Shan [Fri, 14 Feb 2025 04:16:32 +0000 (14:16 +1000)]
hw/acpi/ghes: Make ghes_record_cper_errors() static
acpi_ghes_memory_errors() is the only caller, no need to expose
the function. Besides, the last 'return' in this function isn't
necessary and remove it.
No functional changes intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20250214041635.608012-2-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Philippe Mathieu-Daudé [Thu, 23 Jan 2025 16:28:39 +0000 (17:28 +0100)]
hw/ppc/spapr: Restrict part of PAGE_INIT hypercall to TCG
Restrict the tb_flush() call to TCG. Assert we are using KVM or TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <
20250127102620.39159-3-philmd@linaro.org>
projects / qemu.git / log