git.maquefel.me Git - linux.git/log

drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED

[ Upstream commit d22915d22ded21fd5b24b60d174775789f173997 ]

Starting from Turing, the driver is no longer responsible for initiating
DEVINIT when required as the GPU started loading a FW image from ROM and
executing DEVINIT itself after power-on.

However - we apparently still need to wait for it to complete.

This should correct some issues with runpm on some systems, where we get
control of the HW before it's been fully reinitialised after resume from
suspend.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-1-bskeggs@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoC

[ Upstream commit 54aa39a513dbf2164ca462a19f04519b2407a224 ]

Currently in phy_init_eee() the driver unconditionally configures the PHY
to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt
storm on my qcs404-base board.

Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible
device RX_CLK continues to run even in Rx LPI state.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rose: Fix to not accept on connected socket

[ Upstream commit 14caefcf9837a2be765a566005ad82cd0d2a429f ]

If you call listen() and accept() on an already connect()ed
rose socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and rose_accept() dequeues
the skb waiting in the sk->sk_receive_queue.

This creates a child socket with the sk of the parent
rose socket, which can cause confusion.

Fix rose_listen() to return -EINVAL if the socket has
already been successfully connected, and add lock_sock
to prevent this issue.

Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230125105944.GA133314@ubuntu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/virtio: fix the vringh test for virtio ring changes

[ Upstream commit 3f7b75abf41cc4143aa295f62acbb060a012868d ]

Fix the build caused by missing kmsan_handle_dma() and is_power_of_2() that
are used in drivers/virtio/virtio_ring.c.

Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230110034310.779744-1-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs42l56: fix DT probe

[ Upstream commit e18c6da62edc780e4f4f3c9ce07bdacd69505182 ]

While looking through legacy platform data users, I noticed that
the DT probing never uses data from the DT properties, as the
platform_data structure gets overwritten directly after it
is initialized.

There have never been any boards defining the platform_data in
the mainline kernel either, so this driver so far only worked
with patched kernels or with the default values.

For the benefit of possible downstream users, fix the DT probe
by no longer overwriting the data.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230126162203.2986339-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself

[ Upstream commit 5b4a79ba65a1ab479903fff2e604865d229b70a9 ]

sock_map proto callbacks should never call themselves by design. Protect
against bugs like [1] and break out of the recursive loop to avoid a stack
overflow in favor of a resource leak.

[1] https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-1-1e0ee7ac2f90@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Do not unset preset when cleaning up codec

[ Upstream commit 87978e6ad45a16835cc58234451111091be3c59a ]

Several functions that take part in codec's initialization and removal
are re-used by ASoC codec drivers implementations. Drivers mimic the
behavior of hda_codec_driver_probe/remove() found in
sound/pci/hda/hda_bind.c with their component->probe/remove() instead.

One of the reasons for that is the expectation of
snd_hda_codec_device_new() to receive a valid pointer to an instance of
struct snd_card. This expectation can be met only once sound card
components probing commences.

As ASoC sound card may be unbound without codec device being actually
removed from the system, unsetting ->preset in
snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load
scenario causing null-ptr-deref. Preset is assigned only once, during
device/driver matching whereas ASoC codec driver's module reloading may
occur several times throughout the lifetime of an audio stack.

Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230119143235.1159814-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Verify copy_register_state() preserves parent/live fields

[ Upstream commit b9fa9bc839291020b362ab5392e5f18ba79657ac ]

A testcase to check that verifier.c:copy_register_state() preserves
register parentage chain and livness information.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230106142214.1040390-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_cs42l42: always set dpcm_capture for amplifiers

[ Upstream commit e0a52220344ab7defe25b9cdd58fe1dc1122e67c ]

The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.

To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.

Link: https://github.com/thesofproject/linux/issues/4083
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230119163459.2235843-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_rt5682: always set dpcm_capture for amplifiers

[ Upstream commit 324f065cdbaba1b879a63bf07e61ca156b789537 ]

The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.

To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.

Link: https://github.com/thesofproject/linux/issues/4083
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230119163459.2235843-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / x86: Add support for LPS0 callback handler

[ Upstream commit 20e1d6402a71dba7ad2b81f332a3c14c7d3b939b ]

Currenty the latest thing run during a suspend to idle attempt is
the LPS0 `prepare_late` callback and the earliest thing is the
`resume_early` callback.

There is a desire for the `amd-pmc` driver to suspend later in the
suspend process (ideally the very last thing), so create a callback
that it or any other driver can hook into to do this.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220317141445.6498-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: kprobe: Fixup misaligned load text

[ Upstream commit eb7423273cc9922ee2d05bf660c034d7d515bb91 ]

The current kprobe would cause a misaligned load for the probe point.
This patch fixup it with two half-word loads instead.

Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230204063531.740220-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kprobes: treewide: Cleanup the error messages for kprobes

[ Upstream commit 9c89bb8e327203bc27e09ebd82d8f61ac2ae8b24 ]

This clean up the error/notification messages in kprobes related code.
Basically this defines 'pr_fmt()' macros for each files and update
the messages which describes

- what happened,
- what is the kernel going to do or not do,
- is the kernel fine,
- what can the user do about it.

Also, if the message is not needed (e.g. the function returns unique
error code, or other error message is already shown.) remove it,
and replace the message with WARN_*() macros if suitable.

Link: https://lkml.kernel.org/r/163163036568.489837.14085396178727185469.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Stable-dep-of: eb7423273cc9 ("riscv: kprobe: Fixup misaligned load text")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: fix locking for in-kernel listener creation

[ Upstream commit ad2171009d968104ccda9dc517f5a3ba891515db ]

For consistency, in mptcp_pm_nl_create_listen_socket(), we need to
call the __mptcp_nmpc_socket() under the msk socket lock.

Note that as a side effect, mptcp_subflow_create_socket() needs a
'nested' lockdep annotation, as it will acquire the subflow (kernel)
socket lock under the in-kernel listener msk socket lock.

The current lack of locking is almost harmless, because the relevant
socket is not exposed to the user space, but in future we will add
more complexity to the mentioned helper, let's play safe.

Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.94

Link: https://lore.kernel.org/r/20230213144732.336342050@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions

commit 493a2c2d23ca91afba96ac32b6cbafb54382c2a3 upstream.

Add the admin guide for the Cross-Thread Return Predictions vulnerability.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <60f9c0b4396956ce70499ae180cb548720b25c7e.1675956146.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Mitigate the cross-thread return address predictions bug

commit 6f0f2d5ef895d66a3f2b32dd05189ec34afa5a55 upstream.

By default, KVM/SVM will intercept attempts by the guest to transition
out of C0. However, the KVM_CAP_X86_DISABLE_EXITS capability can be used
by a VMM to change this behavior. To mitigate the cross-thread return
address predictions bug (X86_BUG_SMT_RSB), a VMM must not be allowed to
override the default behavior to intercept C0 transitions.

Use a module parameter to control the mitigation on processors that are
vulnerable to X86_BUG_SMT_RSB. If the processor is vulnerable to the
X86_BUG_SMT_RSB bug and the module parameter is set to mitigate the bug,
KVM will not allow the disabling of the HLT, MWAIT and CSTATE exits.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4019348b5e07148eb4d593380a5f6713b93c9a16.1675956146.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Identify processors vulnerable to SMT RSB predictions

commit be8de49bea505e7777a69ef63d60e02ac1712683 upstream.

Certain AMD processors are vulnerable to a cross-thread return address
predictions bug. When running in SMT mode and one of the sibling threads
transitions out of C0 state, the other sibling thread could use return
target predictions from the sibling thread that transitioned out of C0.

The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM to
prevent exiting guest mode when transitioning out of C0. A guest could
act maliciously in this situation, so create a new x86 BUG that can be
used to detect if the processor is vulnerable.

Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <91cec885656ca1fcd4f0185ce403a53dd9edecb7.1675956146.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix VBT DSI DVO port handling

commit 6a7ff131f17f44c593173c5ee30e2c03ef211685 upstream.

Turns out modern (icl+) VBTs still declare their DSI ports
as MIPI-A and MIPI-C despite the PHYs now being A and B.
Remap appropriately to allow the panels declared as MIPI-C
to work.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 118b5c136c04da705b274b0d39982bb8b7430fc5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Initialize the obj flags for shmem objects

commit 44e4c5684fcc82d8f099656c4ea39d9571e2a8ac upstream.

Obj flags for shmem objects is not being set correctly. Fixes in setting
BO_ALLOC_USER flag which applies to shmem objs as well.

v2: Add fixes tag (Tvrtko, Matt A)

Fixes: 13d29c823738 ("drm/i915/ehl: unconditionally flush the pages on acquire")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[tursulin: Grouped all tags together.]
Link: https://patchwork.freedesktop.org/patch/msgid/20230203135205.4051149-1-aravind.iddamsetty@intel.com
(cherry picked from commit bca0d1d3ceeb07be45a51c0fa4d57a0ce31b6aed)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini

commit 5ad7bbf3dba5c4a684338df1f285080f2588b535 upstream.

Currently amdgpu calls drm_sched_fini() from the fence driver sw fini
routine - such function is expected to be called only after the
respective init function - drm_sched_init() - was executed successfully.

Happens that we faced a driver probe failure in the Steam Deck
recently, and the function drm_sched_fini() was called even without
its counter-part had been previously called, causing the following oops:

amdgpu: probe of 0000:04:00.0 failed with error -110
BUG: kernel NULL pointer dereference, address: 0000000000000090
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022
RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched]
[...]
Call Trace:
<TASK>
amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu]
amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu]
amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
devm_drm_dev_init_release+0x49/0x70
[...]

To prevent that, check if the drm_sched was properly initialized for a
given ring before calling its fini counter-part.

Notice ideally we'd use sched.ready for that; such field is set as the latest
thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such
field - in the above oops for example, it was a GFX ring causing the crash, and
the sched.ready field was set to true in the ring init routine, regardless of
the state of the DRM scheduler. Hence, we ended-up using sched.ops as per
Christian's suggestion [0], and also removed the no_scheduler check [1].

[0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/
[1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/

Fixes: 067f44c8b459 ("drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix page corruption caused by racy check in __free_pages

commit 462a8e08e0e6287e5ce13187257edbf24213ed03 upstream.

When we upgraded our kernel, we started seeing some page corruption like
the following consistently:

  BUG: Bad page state in process ganesha.nfsd  pfn:1304ca
  page:0000000022261c55 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x1304ca
  flags: 0x17ffffc0000000()
  raw: 0017ffffc0000000 ffff8a513ffd4c98 ffffeee24b35ec08 0000000000000000
  raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000
  page dumped because: nonzero mapcount
  CPU: 0 PID: 15567 Comm: ganesha.nfsd Kdump: loaded Tainted: P    B      O      5.10.158-1.nutanix.20221209.el7.x86_64 #1
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
  Call Trace:
   dump_stack+0x74/0x96
   bad_page.cold+0x63/0x94
   check_new_page_bad+0x6d/0x80
   rmqueue+0x46e/0x970
   get_page_from_freelist+0xcb/0x3f0
   ? _cond_resched+0x19/0x40
   __alloc_pages_nodemask+0x164/0x300
   alloc_pages_current+0x87/0xf0
   skb_page_frag_refill+0x84/0x110
   ...

Sometimes, it would also show up as corruption in the free list pointer
and cause crashes.

After bisecting the issue, we found the issue started from commit
e320d3012d25 ("mm/page_alloc.c: fix freeing non-compound pages"):

if (put_page_testzero(page))
free_the_page(page, order);
else if (!PageHead(page))
while (order-- > 0)
free_the_page(page + (1 << order), order);

So the problem is the check PageHead is racy because at this point we
already dropped our reference to the page.  So even if we came in with
compound page, the page can already be freed and PageHead can return
false and we will end up freeing all the tail pages causing double free.

Fixes: e320d3012d25 ("mm/page_alloc.c: fix freeing non-compound pages")
Link: https://lore.kernel.org/lkml/BYAPR02MB448855960A9656EEA81141FC94D99@BYAPR02MB4488.namprd02.prod.outlook.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive

commit d182bcf300772d8b2e5f43e47fa0ebda2b767cc4 upstream.

The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.

[0] https://www.spinics.net/lists/linux-mmc/msg73991.html

Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller")
Reported-by: Peter Suti <peter.suti@streamunlimited.com>
Tested-by: Vyacheslav Bocharov <adeep@lexina.in>
Tested-by: Peter Suti <peter.suti@streamunlimited.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive

commit ac8db4cceed218cca21c84f9d75ce88182d8b04f upstream.

The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.

[0] https://www.spinics.net/lists/linux-mmc/msg73991.html

Fixes: 4759fd87b928 ("arm64: dts: meson: g12a: add mmc nodes")
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/27d89baa-b8fa-baca-541b-ef17a97cde3c@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive

commit 66e45351f7d6798751f98001d1fcd572024d87f0 upstream.

The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.

[0] https://www.spinics.net/lists/linux-mmc/msg73991.html

Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtmutex: Ensure that the top waiter is always woken up

commit db370a8b9f67ae5f17e3d5482493294467784504 upstream.

Let L1 and L2 be two spinlocks.

Let T1 be a task holding L1 and blocked on L2. T1, currently, is the top
waiter of L2.

Let T2 be the task holding L2.

Let T3 be a task trying to acquire L1.

The following events will lead to a state in which the wait queue of L2
isn't empty, but no task actually holds the lock.

T1                T2                                  T3
==                ==                                  ==

                                                      spin_lock(L1)
                                                      | raw_spin_lock(L1->wait_lock)
                                                      | rtlock_slowlock_locked(L1)
                                                      | | task_blocks_on_rt_mutex(L1, T3)
                                                      | | | orig_waiter->lock = L1
                                                      | | | orig_waiter->task = T3
                                                      | | | raw_spin_unlock(L1->wait_lock)
                                                      | | | rt_mutex_adjust_prio_chain(T1, L1, L2, orig_waiter, T3)
                  spin_unlock(L2)                     | | | |
                  | rt_mutex_slowunlock(L2)           | | | |
                  | | raw_spin_lock(L2->wait_lock)    | | | |
                  | | wakeup(T1)                      | | | |
                  | | raw_spin_unlock(L2->wait_lock)  | | | |
                                                      | | | | waiter = T1->pi_blocked_on
                                                      | | | | waiter == rt_mutex_top_waiter(L2)
                                                      | | | | waiter->task == T1
                                                      | | | | raw_spin_lock(L2->wait_lock)
                                                      | | | | dequeue(L2, waiter)
                                                      | | | | update_prio(waiter, T1)
                                                      | | | | enqueue(L2, waiter)
                                                      | | | | waiter != rt_mutex_top_waiter(L2)
                                                      | | | | L2->owner == NULL
                                                      | | | | wakeup(T1)
                                                      | | | | raw_spin_unlock(L2->wait_lock)
T1 wakes up
T1 != top_waiter(L2)
schedule_rtlock()

If the deadline of T1 is updated before the call to update_prio(), and the
new deadline is greater than the deadline of the second top waiter, then
after the requeue, T1 is no longer the top waiter, and the wrong task is
woken up which will then go back to sleep because it is not the top waiter.

This can be reproduced in PREEMPT_RT with stress-ng:

while true; do
    stress-ng --sched deadline --sched-period 1000000000 \
         --sched-runtime 800000000 --sched-deadline \
         1000000000 --mmapfork 23 -t 20
done

A similar issue was pointed out by Thomas versus the cases where the top
waiter drops out early due to a signal or timeout, which is a general issue
for all regular rtmutex use cases, e.g. futex.

The problematic code is in rt_mutex_adjust_prio_chain():

     // Save the top waiter before dequeue/enqueue
prerequeue_top_waiter = rt_mutex_top_waiter(lock);

rt_mutex_dequeue(lock, waiter);
waiter_update_prio(waiter, task);
rt_mutex_enqueue(lock, waiter);

// Lock has no owner?
if (!rt_mutex_owner(lock)) {
    // Top waiter changed
  ----> if (prerequeue_top_waiter != rt_mutex_top_waiter(lock))
  ----> wake_up_state(waiter->task, waiter->wake_state);

This only takes the case into account where @waiter is the new top waiter
due to the requeue operation.

But it fails to handle the case where @waiter is not longer the top
waiter due to the requeue operation.

Ensure that the new top waiter is woken up so in all cases so it can take
over the ownerless lock.

[ tglx: Amend changelog, add Fixes tag ]

Fixes: c014ef69b3ac ("locking/rtmutex: Add wake_state to rt_mutex_waiter")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230117172649.52465-1-wander@redhat.com
Link: https://lore.kernel.org/r/20230202123020.14844-1-wander@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switch

commit 2ea31e2e62bbc4d11c411eeb36f1b02841dbcab1 upstream.

The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.

Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c.

Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fixup race condition on PG_dcache_clean in flush_icache_pte

commit 950b879b7f0251317d26bae0687e72592d607532 upstream.

In commit 588a513d3425 ("arm64: Fix race condition on PG_dcache_clean
in __sync_icache_dcache()"), we found RISC-V has the same issue as the
previous arm64. The previous implementation didn't guarantee the correct
sequence of operations, which means flush_icache_all() hasn't been
called when the PG_dcache_clean was set. That would cause a risk of page
synchronization.

Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230127035306.1819561-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: flush cap releases when the session is flushed

commit e7d84c6a1296d059389f7342d9b4b7defb518d3a upstream.

MDS expects the completed cap release prior to responding to the
session flush for cache drop.

Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/38009
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: ingenic: jz4760: Update M/N/OD calculation algorithm

commit ecfb9f404771dde909ce7743df954370933c3be2 upstream.

The previous algorithm was pretty broken.

- The inner loop had a '(m > m_max)' condition, and the value of 'm'
  would increase in each iteration;

- Each iteration would actually multiply 'm' by two, so it is not needed
  to re-compute the whole equation at each iteration;

- It would loop until (m & 1) == 0, which means it would loop at most
  once.

- The outer loop would divide the 'n' value by two at the end of each
  iteration. This meant that for a 12 MHz parent clock and a 1.2 GHz
  requested clock, it would first try n=12, then n=6, then n=3, then
  n=1, none of which would work; the only valid value is n=2 in this
  case.

Simplify this algorithm with a single for loop, which decrements 'n'
after each iteration, addressing all of the above problems.

Fixes: bdbfc029374f ("clk: ingenic: Add support for the JZ4760")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221214123704.7305-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: altmodes/displayport: Fix probe pin assign check

commit 54e5c00a4eb0a4c663445b245f641bbfab142430 upstream.

While checking Pin Assignments of the port and partner during probe, we
don't take into account whether the peripheral is a plug or receptacle.

This manifests itself in a mode entry failure on certain docks and
dongles with captive cables. For instance, the Startech.com Type-C to DP
dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail
the Pin Assignment compatibility check, despite it supporting
Pin Assignment C as a UFP.

Update the check to use the correct DP Pin Assign macros that
take the peripheral's receptacle bit into account.

Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Reported-by: Diana Zigterman <dzigterman@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20230208205318.131385-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: add quirk for Alcor Link AK9563 smartcard reader

commit 303e724d7b1e1a0a93daf0b1ab5f7c4f53543b34 upstream.

The Alcor Link AK9563 smartcard reader used on some Lenovo platforms
doesn't work. If LPM is enabled the reader will provide an invalid
usb config descriptor. Added quirk to disable LPM.

Verified fix on Lenovo P16 G1 and T14 G3

Tested-by: Miroslav Zatko <mzatko@mirexoft.com>
Tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230208181223.1092654-1-mpearson-lenovo@squebb.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: free device in btrfs_close_devices for a single device filesystem

commit 5f58d783fd7823b2c2d5954d1126e702f94bfc4c upstream.

We have this check to make sure we don't accidentally add older devices
that may have disappeared and re-appeared with an older generation from
being added to an fs_devices (such as a replace source device). This
makes sense, we don't want stale disks in our file system. However for
single disks this doesn't really make sense.

I've seen this in testing, but I was provided a reproducer from a
project that builds btrfs images on loopback devices. The loopback
device gets cached with the new generation, and then if it is re-used to
generate a new file system we'll fail to mount it because the new fs is
"older" than what we have in cache.

Fix this by freeing the cache when closing the device for a single device
filesystem. This will ensure that the mount command passed device path is
scanned successfully during the next mount.

CC: stable@vger.kernel.org # 5.10+
Reported-by: Daan De Meyer <daandemeyer@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: be careful on subflow status propagation on errors

commit 1249db44a102d9d3541ed7798d4b01ffdcf03524 upstream.

Currently the subflow error report callback unconditionally
propagates the fallback subflow status to the owning msk.

If the msk is already orphaned, the above prevents the code
from correctly tracking the msk moving to the TCP_CLOSE state
and doing the appropriate cleanup.

All the above causes increasing memory usage over time and
sporadic self-tests failures.

There is a great deal of infrastructure trying to propagate
correctly the fallback subflow status to the owning mptcp socket,
e.g. via mptcp_subflow_eof() and subflow_sched_work_if_closed():
in the error propagation path we need only to cope with unorphaned
sockets.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/339
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: USB: Fix wrong-direction WARNING in plusb.c

commit 811d581194f7412eda97acc03d17fc77824b561f upstream.

The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write. In modern kernels this error provokes a WARNING:

usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
__usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
__dev_open+0x297/0x4d0 net/core/dev.c:1417
__dev_change_flags+0x587/0x750 net/core/dev.c:8530
dev_change_flags+0x97/0x170 net/core/dev.c:8602
devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
sock_do_ioctl+0xcc/0x230 net/socket.c:1169
sock_ioctl+0x1f8/0x680 net/socket.c:1286
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag.

Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix use-after-free in rdata->read_into_pages()

commit aa5465aeca3c66fecdf7efcf554aed79b4c4b211 upstream.

When the network status is unstable, use-after-free may occur when
read data from the server.

  BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0

  Call Trace:
   <TASK>
   dump_stack_lvl+0x38/0x4c
   print_report+0x16f/0x4a6
   kasan_report+0xb7/0x130
   readpages_fill_pages+0x14c/0x7e0
   cifs_readv_receive+0x46d/0xa40
   cifs_demultiplex_thread+0x121c/0x1490
   kthread+0x16b/0x1a0
   ret_from_fork+0x2c/0x50
   </TASK>

  Allocated by task 2535:
   kasan_save_stack+0x22/0x50
   kasan_set_track+0x25/0x30
   __kasan_kmalloc+0x82/0x90
   cifs_readdata_direct_alloc+0x2c/0x110
   cifs_readdata_alloc+0x2d/0x60
   cifs_readahead+0x393/0xfe0
   read_pages+0x12f/0x470
   page_cache_ra_unbounded+0x1b1/0x240
   filemap_get_pages+0x1c8/0x9a0
   filemap_read+0x1c0/0x540
   cifs_strict_readv+0x21b/0x240
   vfs_read+0x395/0x4b0
   ksys_read+0xb8/0x150
   do_syscall_64+0x3f/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

  Freed by task 79:
   kasan_save_stack+0x22/0x50
   kasan_set_track+0x25/0x30
   kasan_save_free_info+0x2e/0x50
   __kasan_slab_free+0x10e/0x1a0
   __kmem_cache_free+0x7a/0x1a0
   cifs_readdata_release+0x49/0x60
   process_one_work+0x46c/0x760
   worker_thread+0x2a4/0x6f0
   kthread+0x16b/0x1a0
   ret_from_fork+0x2c/0x50

  Last potentially related work creation:
   kasan_save_stack+0x22/0x50
   __kasan_record_aux_stack+0x95/0xb0
   insert_work+0x2b/0x130
   __queue_work+0x1fe/0x660
   queue_work_on+0x4b/0x60
   smb2_readv_callback+0x396/0x800
   cifs_abort_connection+0x474/0x6a0
   cifs_reconnect+0x5cb/0xa50
   cifs_readv_from_socket.cold+0x22/0x6c
   cifs_read_page_from_socket+0xc1/0x100
   readpages_fill_pages.cold+0x2f/0x46
   cifs_readv_receive+0x46d/0xa40
   cifs_demultiplex_thread+0x121c/0x1490
   kthread+0x16b/0x1a0
   ret_from_fork+0x2c/0x50

The following function calls will cause UAF of the rdata pointer.

readpages_fill_pages
cifs_read_page_from_socket
  cifs_readv_from_socket
   cifs_reconnect
    __cifs_reconnect
     cifs_abort_connection
      mid->callback() --> smb2_readv_callback
       queue_work(&rdata->work)  # if the worker completes first,
                                 # the rdata is freed
          cifs_readv_complete
            kref_put
              cifs_readdata_release
                kfree(rdata)
return rdata->...               # UAF in readpages_fill_pages()

Similarly, this problem also occurs in the uncache_fill_pages().

Fix this by adjusts the order of condition judgment in the return
statement.

Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: intel: Restore the pins that used to be in Direct IRQ mode

[ Upstream commit a8520be3ffef3d25b53bf171a7ebe17ee0154175 ]

If the firmware mangled the register contents too much,
check the saved value for the Direct IRQ mode. If it
matches, we will restore the pin state.

Reported-by: Jim Minter <jimminter@microsoft.com>
Fixes: 6989ea4881c8 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode")
Tested-by: Jim Minter <jimminter@microsoft.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230206141558.20916-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Fix wrong FIFO level setting for long xfers

[ Upstream commit c63b8fd14a7db719f8252038a790638728c4eb66 ]

Due to using the u16 type in the min_t() macros the SPI transfer length
will be cast to word before participating in the conditional statement
implied by the macro. Thus if the transfer length is greater than 64KB the
Tx/Rx FIFO threshold level value will be determined by the leftover of the
truncated after the type-case length. In the worst case it will cause the
dramatical performance drop due to the "Tx FIFO Empty" or "Rx FIFO Full"
interrupts triggered on each xfer word sent/received to/from the bus.

The problem can be easily fixed by specifying the unsigned int type in the
min_t() macros thus preventing the possible data loss.

Fixes: ea11370fffdf ("spi: dw: get TX level without an additional variable")
Reported-by: Sergey Nazarov <Sergey.Nazarov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230113185942.2516-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: single: fix potential NULL dereference

[ Upstream commit d2d73e6d4822140445ad4a7b1c6091e0f5fe703b ]

Added checking of pointer "function" in pcs_set_mux().
pinmux_generic_get_function() can return NULL and the pointer
"function" was dereferenced without checking against NULL.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221118104332.943-1-korotkov.maxim.s@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: aspeed: Fix confusing types in return value

[ Upstream commit 287a344a11f1ebd31055cf9b22c88d7005f108d7 ]

The function signature is int, but we return a bool. Instead return a
negative errno as the kerneldoc suggests.

Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20230119231856.52014-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: Fix the drive register definition of some Pins

[ Upstream commit 5754a1c98b18009cb3030dc391aa37b77428a0bd ]

The drive adjustment register definition of gpio13 and gpio81 is wrong:
"the start address for the range" of gpio18 is corrected to 0x000,
"the start bit for the first register within the range" of gpio81 is
corrected to 24.

Fixes: 6cf5e9ef362a ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Link: https://lore.kernel.org/r/20230118062116.26315-1-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: topology: Return -ENOMEM on memory allocation failure

[ Upstream commit c173ee5b2fa6195066674d66d1d7e191010fb1ff ]

When handling error path, ret needs to be set to correct value.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Fixes: d29d41e28eea ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230207210428.2076354-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: stacktrace: Fix missing the first frame

[ Upstream commit cb80242cc679d6397e77d8a964deeb3ff218d2b5 ]

When running kfence_test, I found some testcases failed like this:

# test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346
Expected report_matches(&expect) to be true, but is false
not ok 1 - test_out_of_bounds_read

The corresponding call-trace is:

BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84

Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10):
  kunit_try_run_case+0x38/0x84
  kunit_generic_run_threadfn_adapter+0x12/0x1e
  kthread+0xc8/0xde
  ret_from_exception+0x0/0xc

The kfence_test using the first frame of call trace to check whether the
testcase is succeed or not. Commit 6a00ef449370 ("riscv: eliminate
unreliable __builtin_frame_address(1)") skip first frame for all
case, which results the kfence_test failed. Indeed, we only need to skip
the first frame for case (task==NULL || task==current).

With this patch, the call-trace will be:

BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e

Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7):
  test_out_of_bounds_read+0x88/0x19e
  kunit_try_run_case+0x38/0x84
  kunit_generic_run_threadfn_adapter+0x12/0x1e
  kthread+0xc8/0xde
  ret_from_exception+0x0/0xc

Fixes: 6a00ef449370 ("riscv: eliminate unreliable __builtin_frame_address(1)")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221207025038.1022045-1-liushixin2@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pci: lx6464es: fix a debug loop

[ Upstream commit 5dac9f8dc25fefd9d928b98f6477ff3daefd73e3 ]

This loop accidentally reuses the "i" iterator for both the inside and
the outside loop. The value of MAX_STREAM_BUFFER is 5. I believe that
chip->rmh.stat_len is in the 2-12 range. If the value of .stat_len is
4 or more then it will loop exactly one time, but if it's less then it
is a forever loop.

It looks like it was supposed to combined into one loop where
conditions are checked.

Fixes: 8e6320064c33 ("ALSA: lx_core: Remove useless #if 0 .. #endif")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y9jnJTis/mRFJAQp@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: forwarding: lib: quote the sysctl values

[ Upstream commit 3a082086aa200852545cf15159213582c0c80eba ]

When set/restore sysctl value, we should quote the value as some keys
may have multi values, e.g. net.ipv4.ping_group_range

Fixes: f5ae57784ba8 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rds: rds_rm_zerocopy_callback() use list_first_entry()

[ Upstream commit f753a68980cf4b59a80fe677619da2b1804f526d ]

rds_rm_zerocopy_callback() uses list_entry() on the head of a list
causing a type confusion.
Use list_first_entry() to actually access the first element of the
rs_zcookie_queue list.

Fixes: 9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Add ndo_tx_timeout support

[ Upstream commit 9b275176270efd18f2f4e328b32be1bad34c4c0d ]

On some platforms, 100/1000/2500 speeds seem to have sometimes problems
reporting false positive tx unit hang during stressful UDP traffic. Likely
other Intel drivers introduce responses to a tx hang. Update the 'tx hang'
comparator with the comparison of the head and tail of ring pointers and
restore the tx_timeout_factor to the previous value (one).

This can be test by using netperf or iperf3 applications.
Example:
iperf3 -s -p 5001
iperf3 -c 192.168.0.2 --udp -p 5001 --time 600 -b 0

netserver -p 16604
netperf -H 192.168.0.2 -l 600 -p 16604 -t UDP_STREAM -- -m 64000

Fixes: b27b8dc77b5e ("igc: Increase timeout value for Speed 100/1000/2500")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230206235818.662384-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Serialize module cleanup with reload and remove

[ Upstream commit 8f0d1451ecf7b3bd5a06ffc866c753d0f3ab4683 ]

Currently, remove and reload flows can run in parallel to module cleanup.
This design is error prone. For example: aux_drivers callbacks are called
from both cleanup and remove flows with different lockings, which can
cause a deadlock[1].
Hence, serialize module cleanup with reload and remove.

[1]
       cleanup                        remove
       -------                        ------
   auxiliary_driver_unregister();
                                     devl_lock()
                                      auxiliary_device_delete(mlx5e_aux)
    device_lock(mlx5e_aux)
     devl_lock()
                                       device_lock(mlx5e_aux)

Fixes: 912cebf420c2 ("net/mlx5e: Connect ethernet part to auxiliary bus")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fw_tracer, Zero consumer index when reloading the tracer

[ Upstream commit 184e1e4474dbcfebc4dbd1fa823a329978f25506 ]

When tracer is reloaded, the device will log the traces at the
beginning of the log buffer. Also, driver is reading the log buffer in
chunks in accordance to the consumer index.
Hence, zero consumer index when reloading the tracer.

Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers

[ Upstream commit db561fed6b8fa3878e74d5df6512a4a38152b63e ]

Whenever the driver is reading the string DBs into buffers, the driver
is setting the load bit, but the driver never clears this bit.
As a result, in case load bit is on and the driver query the device for
new string DBs, the driver won't read again the string DBs.
Fix it by clearing the load bit when query the device for new string
DBs.

Fixes: 2d69356752ff ("net/mlx5: Add support for fw live patch event")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPoIB, Show unknown speed instead of error

[ Upstream commit 8aa5f171d51c1cb69e5e3106df4dd1a446102823 ]

ethtool is returning an error for unknown speeds for the IPoIB interface:

$ ethtool ib0
netlink error: failed to retrieve link settings
netlink error: Invalid argument
netlink error: failed to retrieve link settings
netlink error: Invalid argument
Settings for ib0:
Link detected: no

After this change, ethtool will return success and show "unknown speed":

$ ethtool ib0
Settings for ib0:
Supported ports: [  ]
Supported link modes:   Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes:  Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: no

Fixes: eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Bridge, fix ageing of peer FDB entries

[ Upstream commit da0c52426cd23f8728eff72c2b2d2a3eb6b451f5 ]

SWITCHDEV_FDB_ADD_TO_BRIDGE event handler that updates FDB entry 'lastuse'
field is only executed for eswitch that owns the entry. However, if peer
entry processed packets at least once it will have hardware counter 'used'
value greater than entry 'lastuse' from that point on, which will cause FDB
entry not being aged out.

Process the event on all eswitch instances.

Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change

[ Upstream commit 1e66220948df815d7b37e0ff8b4627ce10433738 ]

rq->hw_mtu is used in function en_rx.c/mlx5e_skb_from_cqe_mpwrq_linear()
to catch oversized packets. If FCS is concatenated to the end of the
packet then the check should be updated accordingly.

Rx rings initialization (mlx5e_init_rxq_rq()) invoked for every new set
of channels, as part of mlx5e_safe_switch_params(), unknowingly if it
runs with default configuration or not. Current rq->hw_mtu
initialization assumes default configuration and ignores
params->scatter_fcs_en flag state.
Fix this, by accounting for params->scatter_fcs_en flag state during
rq->hw_mtu initialization.

In addition, updating rq->hw_mtu value during ingress traffic might
lead to packets drop and oversize_pkts_sw_drop counter increase with no
good reason. Hence we remove this optimization and switch the set of
channels with a new one, to make sure we don't get false positives on
the oversize_pkts_sw_drop counter.

Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Introduce the mlx5e_flush_rq function

[ Upstream commit d9ba64deb2f1ad58eb3067c7485518f3e96559ee ]

Add a function to flush an RQ: clean up descriptors, release pages and
reset the RQ. This procedure is used by the recovery flow, and it will
also be used in a following commit to free some memory when switching a
channel to the XSK mode.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 1e66220948df ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Move repeating clear_bit in mlx5e_rx_reporter_err_rq_cqe_recover

[ Upstream commit e64d71d055ca01fa5054d25b99fb29b98e543a31 ]

The same clear_bit is called in both error and success flows. Move the
call to do it only once and remove the out label.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 1e66220948df ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q"

[ Upstream commit f964f8399df29d3e3ced77177cf35131cd2491bf ]

Alternative short title: don't instruct the hardware to match on
EtherType with "protocol 802.1Q" flower filters. It doesn't work for the
reasons detailed below.

With a command such as the following:

tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
action vlan modify id 300 \
action goto chain $(IS2 0 0)

the created filter is set by ocelot_flower_parse_key() to be of type
OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}.
This gets propagated all the way to is1_entry_set() which commits it to
hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the
case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY,
and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE.

The problem is that for VLAN-tagged frames, the hardware interprets the
ETYPE field as holding the encapsulated VLAN protocol. So the above
filter will only match those packets which have an encapsulated protocol
of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac.

The reason why this is allowed to occur is because, although we have a
block of code in ocelot_flower_parse_key() which sets "match_protocol"
to false when VLAN keys are present, that code executes too late.
There is another block of code, which executes for Ethernet addresses,
and has a "goto finished_key_parsing" and skips the VLAN header parsing.
By skipping it, "match_protocol" remains with the value it was
initialized with, i.e. "true", and "proto" is set to f->common.protocol,
or 0x8100.

The concept of ignoring some keys rather than erroring out when they are
present but can't be offloaded is dubious in itself, but is present
since the initial commit fe3490e6107e ("net: mscc: ocelot: Hardware
ofload for tc flower filter"), and it's outside of the scope of this
patch to change that.

The problem was introduced when the driver started to interpret the
flower filter's protocol, and populate the VCAP filter's ETYPE field
based on it.

To fix this, it is sufficient to move the code that parses the VLAN keys
earlier than the "goto finished_key_parsing" instruction. This will
ensure that if we have a flower filter with both VLAN and Ethernet
address keys, it won't match on ETYPE 0x8100, because the VLAN key
parsing sets "match_protocol = false".

Fixes: 86b956de119c ("net: mscc: ocelot: support matching on EtherType")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-aware

[ Upstream commit 0b6d6425103a676e2b6a81f3fd35d7ea4f9b90ec ]

Frank reports that in a mt7530 setup where some ports are standalone and
some are in a VLAN-aware bridge, 8021q uppers of the standalone ports
lose their VLAN tag on xmit, as seen by the link partner.

This seems to occur because once the other ports join the VLAN-aware
bridge, mt7530_port_vlan_filtering() also calls
mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way
that the switch processes the traffic of the standalone port.

Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it:

EG_TAG: Incoming Port Egress Tag VLAN Attribution
0: disabled (system default)
1: consistent (keep the original ingress tag attribute)

My interpretation is that this setting applies on the ingress port, and
"disabled" is basically the normal behavior, where the egress tag format
of the packet (tagged or untagged) is decided by the VLAN table
(MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG).

But there is also an option of overriding the system default behavior,
and for the egress tagging format of packets to be decided not by the
VLAN table, but simply by copying the ingress tag format (if ingress was
tagged, egress is tagged; if ingress was untagged, egress is untagged;
aka "consistent). This is useful in 2 scenarios:

- VLAN-unaware bridge ports will always encounter a miss in the VLAN
  table. They should forward a packet as-is, though. So we use
  "consistent" there. See commit e045124e9399 ("net: dsa: mt7530: fix
  tagged frames pass-through in VLAN-unaware mode").

- Traffic injected from the CPU port. The operating system is in god
  mode; if it wants a packet to exit as VLAN-tagged, it sends it as
  VLAN-tagged. Otherwise it sends it as VLAN-untagged*.

*This is true only if we don't consider the bridge TX forwarding offload
feature, which mt7530 doesn't support.

So for now, make the CPU port always stay in "consistent" mode to allow
software VLANs to be forwarded to their egress ports with the VLAN tag
intact, and not stripped.

Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/
Fixes: e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Do not use WQ_MEM_RECLAIM flag for workqueue

[ Upstream commit 4d159f7884f78b1aacb99b4fc37d1e3cb1194e39 ]

When both ice and the irdma driver are loaded, a warning in
check_flush_dependency is being triggered. This is due to ice driver
workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one
is not.

According to kernel documentation, this flag should be set if the
workqueue will be involved in the kernel's memory reclamation flow.
Since it is not, there is no need for the ice driver's WQ to have this
flag set so remove it.

Example trace:

[  +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[  +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0
[  +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha
in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel
_rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1
0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_
core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs
ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter
acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba
ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[  +0.000161]  [last unloaded: bonding]
[  +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S                 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1
[  +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020
[  +0.000003] Workqueue: ice ice_service_task [ice]
[  +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0
[  +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08
9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06
[  +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282
[  +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000
[  +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80
[  +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112
[  +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000
[  +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400
[  +0.000004] FS:  0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000
[  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0
[  +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  +0.000002] PKRU: 55555554
[  +0.000003] Call Trace:
[  +0.000002]  <TASK>
[  +0.000003]  __flush_workqueue+0x203/0x840
[  +0.000006]  ? mutex_unlock+0x84/0xd0
[  +0.000008]  ? __pfx_mutex_unlock+0x10/0x10
[  +0.000004]  ? __pfx___flush_workqueue+0x10/0x10
[  +0.000006]  ? mutex_lock+0xa3/0xf0
[  +0.000005]  ib_cache_cleanup_one+0x39/0x190 [ib_core]
[  +0.000174]  __ib_unregister_device+0x84/0xf0 [ib_core]
[  +0.000094]  ib_unregister_device+0x25/0x30 [ib_core]
[  +0.000093]  irdma_ib_unregister_device+0x97/0xc0 [irdma]
[  +0.000064]  ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma]
[  +0.000059]  ? up_write+0x5c/0x90
[  +0.000005]  irdma_remove+0x36/0x90 [irdma]
[  +0.000062]  auxiliary_bus_remove+0x32/0x50
[  +0.000007]  device_release_driver_internal+0xfa/0x1c0
[  +0.000005]  bus_remove_device+0x18a/0x260
[  +0.000007]  device_del+0x2e5/0x650
[  +0.000005]  ? __pfx_device_del+0x10/0x10
[  +0.000003]  ? mutex_unlock+0x84/0xd0
[  +0.000004]  ? __pfx_mutex_unlock+0x10/0x10
[  +0.000004]  ? _raw_spin_unlock+0x18/0x40
[  +0.000005]  ice_unplug_aux_dev+0x52/0x70 [ice]
[  +0.000160]  ice_service_task+0x1309/0x14f0 [ice]
[  +0.000134]  ? __pfx___schedule+0x10/0x10
[  +0.000006]  process_one_work+0x3b1/0x6c0
[  +0.000008]  worker_thread+0x69/0x670
[  +0.000005]  ? __kthread_parkme+0xec/0x110
[  +0.000007]  ? __pfx_worker_thread+0x10/0x10
[  +0.000005]  kthread+0x17f/0x1b0
[  +0.000005]  ? __pfx_kthread+0x10/0x10
[  +0.000004]  ret_from_fork+0x29/0x50
[  +0.000009]  </TASK>

Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uapi: add missing ip/ipv6 header dependencies for linux/stddef.h

[ Upstream commit 03702d4d29be4e2510ec80b248dbbde4e57030d9 ]

Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:

$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
103 | __struct_group(/* no tag */, addrs, /* no attrs */,
| ^~~~~~~~~~~~~~
...

Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.

Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: clean interrupt before enabling queue to avoid credit race

[ Upstream commit e8797a058466b60fc5a3291b92430c93ba90eaff ]

Clear the interrupt credits before enabling the queue rather
than after to be sure that the enabled queue starts at 0 and
that we don't wipe away possible credits after enabling the
queue.

Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Neel Patel <neel.patel@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHY

[ Upstream commit 69ff53e4a4c9498eeed7d1441f68a1481dc69251 ]

Jerome provided the information that also the GXL internal PHY doesn't
support MMD register access and EEE. MMD reads return 0xffff, what
results in e.g. completely wrong ethtool --show-eee output.
Therefore use the MMD dummy stubs.

Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement")
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix error checking in bond_debug_reregister()

[ Upstream commit cbe83191d40d8925b7a99969d037d2a0caf69294 ]

Since commit ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.

Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylink: move phy_device_free() to correctly release phy device

[ Upstream commit ce93fdb5f2ca5c9e2a9668411cc39091507f8dc9 ]

After calling fwnode_phy_find_device(), the phy device refcount is
incremented. Then, when the phy device is attached to a netdev with
phy_attach_direct(), the refcount is also incremented but only
decremented in the caller if phy_attach_direct() fails. Move
phy_device_free() before the "if" to always release it correctly.
Indeed, either phy_attach_direct() failed and we don't want to keep a
reference to the phydev or it succeeded and a reference has been taken
internally.

Fixes: 25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: fix bug with DSCP copy to v6 from v4 tunnel

[ Upstream commit 6028da3f125fec34425dbd5fec18e85d372b2af6 ]

When copying the DSCP bits for decap-dscp into IPv6 don't assume the
outer encap is always IPv6. Instead, as with the inner IPv4 case, copy
the DSCP bits from the correctly saved "tos" value in the control block.

Fixes: 227620e29509 ("[IPSEC]: Separate inner/outer mode processing on input")
Signed-off-by: Christian Hopps <chopps@chopps.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/usnic: use iommu_map_atomic() under spin_lock()

[ Upstream commit b7e08a5a63a11627601915473c3b569c1f6c6c06 ]

usnic_uiom_map_sorted_intervals() is called under spin_lock(), iommu_map()
might sleep, use iommu_map_atomic() to avoid potential sleep in atomic
context.

Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230129093757.637354-1-yangyingliang@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Fix potential NULL-ptr-dereference

[ Upstream commit 5d9745cead1f121974322b94ceadfb4d1e67960e ]

in_dev_get() can return NULL which will cause a failure once idev is
dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a
check for NULL value in idev beforehand.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230126185230.62464-1-n.zhandarovich@fintech.ru
Reviewed-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/IPoIB: Fix legacy IPoIB due to wrong number of queues

[ Upstream commit e632291a2dbce45a24cddeb5fe28fe71d724ba43 ]

The cited commit creates child PKEY interfaces over netlink will
multiple tx and rx queues, but some devices doesn't support more than 1
tx and 1 rx queues. This causes to a crash when traffic is sent over the
PKEY interface due to the parent having a single queue but the child
having multiple queues.

This patch fixes the number of queues to 1 for legacy IPoIB at the
earliest possible point in time.

BUG: kernel NULL pointer dereference, address: 000000000000036b
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmem_cache_alloc+0xcb/0x450
Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a
01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b
RSP: 0018:ffff88822acbbab8 EFLAGS: 00010202
RAX: 0000000000000070 RBX: ffff8881c28e3e00 RCX: 00000000064f8dae
RDX: 00000000064f8dad RSI: 0000000000000a20 RDI: 0000000000030d00
RBP: 0000000000000a20 R08: ffff8882f5d30d00 R09: ffff888104032f40
R10: ffff88810fade828 R11: 736f6d6570736575 R12: ffff88810081c000
R13: 00000000000002fb R14: ffffffff817fc865 R15: 0000000000000000
FS: 00007f9324ff9700(0000) GS:ffff8882f5d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000036b CR3: 00000001125af004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_clone+0x55/0xd0
ip6_finish_output2+0x3fe/0x690
ip6_finish_output+0xfa/0x310
ip6_send_skb+0x1e/0x60
udp_v6_send_skb+0x1e5/0x420
udpv6_sendmsg+0xb3c/0xe60
? ip_mc_finish_output+0x180/0x180
? __switch_to_asm+0x3a/0x60
? __switch_to_asm+0x34/0x60
sock_sendmsg+0x33/0x40
__sys_sendto+0x103/0x160
? _copy_to_user+0x21/0x30
? kvm_clock_get_cycles+0xd/0x10
? ktime_get_ts64+0x49/0xe0
__x64_sys_sendto+0x25/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f9374f1ed14
Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b
7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b
RSP: 002b:00007f9324ff7bd0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f9324ff7cc8 RCX: 00007f9374f1ed14
RDX: 00000000000002fb RSI: 00007f93000052f0 RDI: 0000000000000030
RBP: 0000000000000000 R08: 00007f9324ff7d40 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 000000012a05f200 R14: 0000000000000001 R15: 00007f9374d57bdc
</TASK>

Fixes: dbc94a0fb817 ("IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/95eb6b74c7cf49fa46281f9d056d685c9fa11d38.1674584576.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()

[ Upstream commit b6ee896385380aa621102e8ea402ba12db1cabff ]

  int type = nla_type(nla);

  if (type > XFRMA_MAX) {
            return -EOPNOTSUPP;
  }

@type is then used as an array index and can be used
as a Spectre v1 gadget.

  if (nla_len(nla) < compat_policy[type].len) {

array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.

Fixes: 5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Restore allocated resources on failed copyout

[ Upstream commit 6601fc0d15ffc20654e39486f9bef35567106d68 ]

Fix a resource leak if an error occurs.

Fixes: f404ca4c7ea8 ("IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167354736291.2132367.10894218740150168180.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: compat: change expression for switch in xfrm_xlate64

[ Upstream commit eb6c59b735aa6cca77cdbb59cc69d69a0d63d986 ]

Compare XFRM_MSG_NEWSPDINFO (value from netlink
configuration messages enum) with nlh_src->nlmsg_type
instead of nlh_src->nlmsg_type - XFRM_MSG_BASE.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4e9505064f58 ("net/xfrm/compat: Copy xfrm_spdattr_type_t atributes")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: j1939: do not wait 250 ms if the same addr was already claimed

commit 4ae5e1e97c44f4654516c1d41591a462ed62fa7b upstream.

The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states:
  d) No CF shall begin, or resume, transmission on the network until 250
     ms after it has successfully claimed an address except when
     responding to a request for address-claimed.

But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim
prioritization" show that the CF begins the transmission after 250 ms
from the first AC (address-claimed) message even if it sends another AC
message during that time window to resolve the address contention with
another CF.

As stated in "4.4.2.3 - Address-claimed message":
  In order to successfully claim an address, the CF sending an address
  claimed message shall not receive a contending claim from another CF
  for at least 250 ms.

As stated in "4.4.3.2 - NAME management (NM) message":
  1) A commanding CF can
     d) request that a CF with a specified NAME transmit the address-
        claimed message with its current NAME.
  2) A target CF shall
     d) send an address-claimed message in response to a request for a
        matching NAME

Taking the above arguments into account, the 250 ms wait is requested
only during network initialization.

Do not restart the timer on AC message if both the NAME and the address
match and so if the address has already been claimed (timer has expired)
or the AC message has been sent to resolve the contention with another
CF (timer is still running).

Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/address: Return an error when no valid dma-ranges are found

commit f6933c01e42d2fc83b9133ed755609e4aac6eadd upstream.

Commit 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.

This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.

Fixes: 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Luca Di Stefano <luca.distefano@linaro.org>
Cc: 993612@bugs.debian.org
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw

commit 3e46d910d8acf94e5360126593b68bf4fee4c4a1 upstream.

poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit
42fb0a1e84ff525ebe560e2baf9451ab69127e2b ("tracing/ring-buffer: Have
polling block on watermark").

This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().

This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.

As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.

Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mchehab@kernel.org>
Cc: <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 42fb0a1e84ff5 ("tracing/ring-buffer: Have polling block on watermark")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9

commit 9a6804aa1c92cd28e89e746ace44d5ba101db76c upstream.

The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the
ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref
fixup in order to enable mute/micmute LEDs.

Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook
640 G9, does not work with the 645 G9.

[ rearranged the entry in SSID order -- tiwai ]

Signed-off-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4055cb48-e228-8a13-524d-afbb7aaafebe@kde.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360

commit bd401fd730cbcb0717bbc5438f15084db10f9259 upstream.

Samsung Galaxy Book2 Pro 360 (13" 2022 NP930QED-KA1FR) with codec SSID
144d:ca03 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.

Cc: <stable@vger.kernel.org>
Signed-off-by: Guillaume Pinot <texitoi@texitoi.eu>
Link: https://lore.kernel.org/r/20230129171338.17249-1-texitoi@texitoi.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()

commit 6a32425f953b955b4ff82f339d01df0b713caa5d upstream.

snd_emux_xg_control() can be called with an argument 'param' greater
than size of 'control' array. It may lead to accessing 'control'
array at a wrong index.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207132026.2870-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add Positivo N14KP6-TG

commit 88d18b8896bd98e636b632f805b7e84e61458255 upstream.

Positivo N14KP6-TG (1c6c:1251)
require quirk for enabling headset-mic

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207183720.2519-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zlib: zero-initialize zlib workspace

commit eadd7deca0ad8a83edb2b894d8326c78e78635d6 upstream.

KMSAN reports uses of uninitialized memory in zlib's longest_match()
called on memory originating from zlib_alloc_workspace().
This issue is known by zlib maintainers and is claimed to be harmless,
but to be on the safe side we'd better initialize the memory.

Link: https://zlib.net/zlib_faq.html#faq36
Reported-by: syzbot+14d9e7602ebdf7ec0a60@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: limit device extents to the device size

commit 3c538de0f2a74d50aff7278c092f88ae59cee688 upstream.

There was a recent regression in btrfs/177 that started happening with
the size class patches ("btrfs: introduce size class to block group
allocator").  This however isn't a regression introduced by those
patches, but rather the bug was uncovered by a change in behavior in
these patches.  The patches triggered more chunk allocations in the
^free-space-tree case, which uncovered a race with device shrink.

The problem is we will set the device total size to the new size, and
use this to find a hole for a device extent.  However during shrink we
may have device extents allocated past this range, so we could
potentially find a hole in a range past our new shrink size.  We don't
actually limit our found extent to the device size anywhere, we assume
that we will not find a hole past our device size.  This isn't true with
shrink as we're relocating block groups and thus creating holes past the
device size.

Fix this by making sure we do not search past the new device size, and
if we wander into any device extents that start after our device size
simply break from the loop and use whatever hole we've already found.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

migrate: hugetlb: check for hugetlb shared PMD in node migration

[ Upstream commit 73bdf65ea74857d7fb2ec3067a3cec0e261b1462 ]

migrate_pages/mempolicy semantics state that CAP_SYS_NICE is required to
move pages shared with another process to a different node.  page_mapcount
> 1 is being used to determine if a hugetlb page is shared.  However, a
hugetlb page will have a mapcount of 1 if mapped by multiple processes via
a shared PMD.  As a result, hugetlb pages shared by multiple processes and
mapped with a shared PMD can be moved by a process without CAP_SYS_NICE.

To fix, check for a shared PMD if mapcount is 1.  If a shared PMD is found
consider the page shared.

Link: https://lkml.kernel.org/r/20230126222721.222195-3-mike.kravetz@oracle.com
Fixes: e2d8cf405525 ("migrate: add hugepage migration code to migrate_pages()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/migration: return errno when isolate_huge_page failed

[ Upstream commit 7ce82f4c3f3ead13a9d9498768e3b1a79975c4d8 ]

We might fail to isolate huge page due to e.g.  the page is under
migration which cleared HPageMigratable.  We should return errno in this
case rather than always return 1 which could confuse the user, i.e.  the
caller might think all of the memory is migrated while the hugetlb page is
left behind.  We make the prototype of isolate_huge_page consistent with
isolate_lru_page as suggested by Huang Ying and rename isolate_huge_page
to isolate_hugetlb as suggested by Muchun to improve the readability.

Link: https://lkml.kernel.org/r/20220530113016.16663-4-linmiaohe@huawei.com
Fixes: e8db67eb0ded ("mm: migrate: move_pages() supports thp migration")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Huang Ying <ying.huang@intel.com>
Reported-by: kernel test robot <lkp@intel.com> (build error)
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 73bdf65ea748 ("migrate: hugetlb: check for hugetlb shared PMD in node migration")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.93

Link: https://lore.kernel.org/r/20230207125618.699726054@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Skip invalid kfunc call in backtrack_insn

commit d3178e8a434b58678d99257c0387810a24042fb6 upstream.

The verifier skips invalid kfunc call in check_kfunc_call(), which
would be captured in fixup_kfunc_call() if such insn is not eliminated
by dead code elimination. However, this can lead to the following
warning in backtrack_insn(), also see [1]:

  ------------[ cut here ]------------
  verifier backtracking bug
  WARNING: CPU: 6 PID: 8646 at kernel/bpf/verifier.c:2756 backtrack_insn
  kernel/bpf/verifier.c:2756
__mark_chain_precision kernel/bpf/verifier.c:3065
mark_chain_precision kernel/bpf/verifier.c:3165
adjust_reg_min_max_vals kernel/bpf/verifier.c:10715
check_alu_op kernel/bpf/verifier.c:10928
do_check kernel/bpf/verifier.c:13821 [inline]
do_check_common kernel/bpf/verifier.c:16289
  [...]

So make backtracking conservative with this by returning ENOTSUPP.

  [1] https://lore.kernel.org/bpf/CACkBjsaXNceR8ZjkLG=dT3P=4A8SBsg0Z5h5PWLryF5=ghKq=g@mail.gmail.com/

Reported-by: syzbot+4da3ff23081bafe74fc2@syzkaller.appspotmail.com
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230104014709.9375-1-sunhao.th@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Always check inode size of inline inodes

commit 70376c7ff31221f1d21db5611d8209e677781d3a upstream.

Check if the inode size of stuffed (inline) inodes is within the allowed
range when reading inodes from disk (gfs2_dinode_in()). This prevents
us from on-disk corruption.

The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just
truncate inline data to the maximum allowed size don't actually make
sense, and they can be removed now as well.

Reported-by: syzbot+7bb81dfa9cda07d9cd9d@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Cosmetic gfs2_dinode_{in,out} cleanup

commit 7db354444ad8429e660b0f8145d425285d4f90ff upstream.

In each of the two functions, add an inode variable that points to
&ip->i_inode and use that throughout the rest of the function.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: brcmfmac: Check the count value of channel spec to prevent out-of-bounds reads

commit 4920ab131b2dbae7464b72bdcac465d070254209 upstream.

This patch fixes slab-out-of-bounds reads in brcmfmac that occur in
brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count
value of channel specifications provided by the device is greater than
the length of 'list->element[]', decided by the size of the 'list'
allocated with kzalloc(). The patch adds checks that make the functions
free the buffer and return -EINVAL if that is the case. Note that the
negative return is handled by the caller, brcmf_setup_wiphybands() or
brcmf_cfg80211_attach().

Found by a modified version of syzkaller.

Crash Report from brcmf_construct_chaninfo():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_setup_wiphybands+0x1238/0x1430
Read of size 4 at addr ffff888115f24600 by task kworker/0:2/1896

CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G        W  O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0.cold+0x93/0x334
kasan_report.cold+0x83/0xdf
brcmf_setup_wiphybands+0x1238/0x1430
brcmf_cfg80211_attach+0x2118/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30

Allocated by task 1896:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
kmem_cache_alloc_trace+0x19e/0x330
brcmf_setup_wiphybands+0x290/0x1430
brcmf_cfg80211_attach+0x2118/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888115f24000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
2048-byte region [ffff888115f24000, ffff888115f24800)

Memory state around the buggy address:
ffff888115f24500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888115f24580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888115f24600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
ffff888115f24680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888115f24700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Crash Report from brcmf_enable_bw40_2g():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_cfg80211_attach+0x3d11/0x3fd0
Read of size 4 at addr ffff888103787600 by task kworker/0:2/1896

CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G        W  O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0.cold+0x93/0x334
kasan_report.cold+0x83/0xdf
brcmf_cfg80211_attach+0x3d11/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30

Allocated by task 1896:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
kmem_cache_alloc_trace+0x19e/0x330
brcmf_cfg80211_attach+0x3302/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888103787000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
2048-byte region [ffff888103787000, ffff888103787800)

Memory state around the buggy address:
ffff888103787500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888103787580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888103787600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
ffff888103787680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888103787700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221116142952.518241-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on i_extra_isize in is_alive()

commit d3b7b4afd6b2c344eabf9cc26b8bfa903c164c7c upstream.

syzbot found a f2fs bug:

BUG: KASAN: slab-out-of-bounds in data_blkaddr fs/f2fs/f2fs.h:2891 [inline]
BUG: KASAN: slab-out-of-bounds in is_alive fs/f2fs/gc.c:1117 [inline]
BUG: KASAN: slab-out-of-bounds in gc_data_segment fs/f2fs/gc.c:1520 [inline]
BUG: KASAN: slab-out-of-bounds in do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734
Read of size 4 at addr ffff888076557568 by task kworker/u4:3/52

CPU: 1 PID: 52 Comm: kworker/u4:3 Not tainted 6.1.0-rc4-syzkaller-00362-gfef7fd48922d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x45d mm/kasan/report.c:395
kasan_report+0xbb/0x1f0 mm/kasan/report.c:495
data_blkaddr fs/f2fs/f2fs.h:2891 [inline]
is_alive fs/f2fs/gc.c:1117 [inline]
gc_data_segment fs/f2fs/gc.c:1520 [inline]
do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734
f2fs_gc+0x88c/0x20a0 fs/f2fs/gc.c:1831
f2fs_balance_fs+0x544/0x6b0 fs/f2fs/segment.c:410
f2fs_write_inode+0x57e/0xe20 fs/f2fs/inode.c:753
write_inode fs/fs-writeback.c:1440 [inline]
__writeback_single_inode+0xcfc/0x1440 fs/fs-writeback.c:1652
writeback_sb_inodes+0x54d/0xf90 fs/fs-writeback.c:1870
wb_writeback+0x2c5/0xd70 fs/fs-writeback.c:2044
wb_do_writeback fs/fs-writeback.c:2187 [inline]
wb_workfn+0x2dc/0x12f0 fs/fs-writeback.c:2227
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The root cause is that we forgot to do sanity check on .i_extra_isize
in below path, result in accessing invalid address later, fix it.
- gc_data_segment
- is_alive
- data_blkaddr
- offset_in_addr

Reported-by: syzbot+f8f3dfa4abc489e768a1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-f2fs-devel/0000000000003cb3c405ed5c17f9@google.com/T/#u
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: smscufx: fix error handling code in ufx_usb_probe

commit b76449ee75e21acfe9fa4c653d8598f191ed7d68 upstream.

The current error handling code in ufx_usb_probe have many unmatching
issues, e.g., missing ufx_free_usb_list, destroy_modedb label should
only include framebuffer_release, fb_dealloc_cmap only matches
fb_alloc_cmap.

My local syzkaller reports a memory leak bug:

memory leak in ufx_usb_probe

BUG: memory leak
unreferenced object 0xffff88802f879580 (size 128):
  comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s)
  hex dump (first 32 bytes):
    80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff  .!|.............
    00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00  ................
  backtrace:
    [<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045
    [<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline]
    [<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline]
    [<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline]
    [<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655
    [<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
    [<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808
    [<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936
    [<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008
    [<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517
    [<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170
    [<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778

Fix this bug by rewriting the error handling code in ufx_usb_probe.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Tested-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Use "buf" flexible array for memcpy() destination

commit cf8aa9bf97cadf85745506c6a3e244b22c268d63 upstream.

The "buf" flexible array needs to be the memcpy() destination to avoid
false positive run-time warning from the recent FORTIFY_SOURCE
hardening:

memcpy: detected field-spanning write (size 93) of single field "&fh->fb"
at fs/overlayfs/export.c:799 (size 21)

Reported-by: syzbot+9d14351a171d0d1c7955@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000763a6c05e95a5985@google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Validate attribute data and valid sizes

commit 019d22eb0eb707fc099e6e8fad9b3933236a06d0 upstream.

The data_size and valid_size fields of non resident attributes should be
less than the its alloc_size field, but this is not checked in
ntfs_read_mft function.

Syzbot reports a allocation order warning due to a large unchecked value
of data_size getting assigned to inode->i_size which is then passed to
kcalloc.

Add sanity check for ensuring that the data_size and valid_size fields
are not larger than alloc_size field.

Link: https://syzkaller.appspot.com/bug?extid=fa4648a5446460b7b963
Reported-and-tested-by: syzbot+fa4648a5446460b7b963@syzkaller.appspotmail.com
Fixes: (82cae269cfa95) fs/ntfs3: Add initialization of super block
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/imc-pmu: Revert nest_init_lock to being a mutex

commit ad53db4acb415976761d7302f5b02e97f2bd097e upstream.

The recent commit 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in
IRQs disabled section") fixed warnings (and possible deadlocks) in the
IMC PMU driver by converting the locking to use spinlocks.

It also converted the init-time nest_init_lock to a spinlock, even
though it's not used at runtime in IRQ disabled sections or while
holding other spinlocks.

This leads to warnings such as:

  BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:49
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
  preempt_count: 1, expected: 0
  CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-14719-gf12cd06109f4-dirty #1
  Hardware name: Mambo,Simulated-System POWER9 0x4e1203 opal:v6.6.6 PowerNV
  Call Trace:
    dump_stack_lvl+0x74/0xa8 (unreliable)
    __might_resched+0x178/0x1a0
    __cpuhp_setup_state+0x64/0x1e0
    init_imc_pmu+0xe48/0x1250
    opal_imc_counters_probe+0x30c/0x6a0
    platform_probe+0x78/0x110
    really_probe+0x104/0x420
    __driver_probe_device+0xb0/0x170
    driver_probe_device+0x58/0x180
    __driver_attach+0xd8/0x250
    bus_for_each_dev+0xb4/0x140
    driver_attach+0x34/0x50
    bus_add_driver+0x1e8/0x2d0
    driver_register+0xb4/0x1c0
    __platform_driver_register+0x38/0x50
    opal_imc_driver_init+0x2c/0x40
    do_one_initcall+0x80/0x360
    kernel_init_freeable+0x310/0x3b8
    kernel_init+0x30/0x1a0
    ret_from_kernel_thread+0x5c/0x64

Fix it by converting nest_init_lock back to a mutex, so that we can call
sleeping functions while holding it. There is no interaction between
nest_init_lock and the runtime spinlocks used by the actual PMU routines.

Fixes: 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Tested-by: Kajol Jain<kjain@linux.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230130014401.540543-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:twl6030: Enable measurement of VAC

commit bffb7d9d1a3dbd09e083b88aefd093b3b10abbfb upstream.

VAC needs to be wired up to produce proper measurements,
without this change only near zero values are reported.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Do not reject when the stack read size is different from the tracked scalar size

commit f30d4968e9aee737e174fc97942af46cfb49b484 upstream.

Below is a simplified case from a report in bcc [0]:

  r4 = 20
  *(u32 *)(r10 -4) = r4
  *(u32 *)(r10 -8) = r4  /* r4 state is tracked */
  r4 = *(u64 *)(r10 -8)  /* Read more than the tracked 32bit scalar.
  * verifier rejects as 'corrupted spill memory'.
  */

After commit 354e8f1970f8 ("bpf: Support <8-byte scalar spill and refill"),
the 8-byte aligned 32bit spill is also tracked by the verifier and the
register state is stored.

However, if 8 bytes are read from the stack instead of the tracked 4 byte
scalar, then verifier currently rejects the program as "corrupted spill
memory". This patch fixes this case by allowing it to read but marks the
register as unknown.

Also note that, if the prog is trying to corrupt/leak an earlier spilled
pointer by spilling another <8 bytes register on top, this has already
been rejected in the check_stack_write_fixed_off().

  [0] https://github.com/iovisor/bcc/pull/3683

Fixes: 354e8f1970f8 ("bpf: Support <8-byte scalar spill and refill")
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Reported-by: Yonghong Song <yhs@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211102064535.316018-1-kafai@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix incorrect state pruning for <8B spill/fill

commit 345e004d023343d38088fdfea39688aa11e06ccf upstream.

Commit 354e8f1970f8 ("bpf: Support <8-byte scalar spill and refill")
introduced support in the verifier to track <8B spill/fills of scalars.
The backtracking logic for the precision bit was however skipping
spill/fills of less than 8B. That could cause state pruning to consider
two states equivalent when they shouldn't be.

As an example, consider the following bytecode snippet:

  0:  r7 = r1
  1:  call bpf_get_prandom_u32
  2:  r6 = 2
  3:  if r0 == 0 goto pc+1
  4:  r6 = 3
  ...
  8: [state pruning point]
  ...
  /* u32 spill/fill */
  10: *(u32 *)(r10 - 8) = r6
  11: r8 = *(u32 *)(r10 - 8)
  12: r0 = 0
  13: if r8 == 3 goto pc+1
  14: r0 = 1
  15: exit

The verifier first walks the path with R6=3. Given the support for <8B
spill/fills, at instruction 13, it knows the condition is true and skips
instruction 14. At that point, the backtracking logic kicks in but stops
at the fill instruction since it only propagates the precision bit for
8B spill/fill. When the verifier then walks the path with R6=2, it will
consider it safe at instruction 8 because R6 is not marked as needing
precision. Instruction 14 is thus never walked and is then incorrectly
removed as 'dead code'.

It's also possible to lead the verifier to accept e.g. an out-of-bound
memory access instead of causing an incorrect dead code elimination.

This regression was found via Cilium's bpf-next CI where it was causing
a conntrack map update to be silently skipped because the code had been
removed by the verifier.

This commit fixes it by enabling support for <8B spill/fills in the
bactracking logic. In case of a <8B spill/fill, the full 8B stack slot
will be marked as needing precision. Then, in __mark_chain_precision,
any tracked register spilled in a marked slot will itself be marked as
needing precision, regardless of the spill size. This logic makes two
assumptions: (1) only 8B-aligned spill/fill are tracked and (2) spilled
registers are only tracked if the spill and fill sizes are equal. Commit
ef979017b837 ("bpf: selftest: Add verifier tests for <8-byte scalar
spill and refill") covers the first assumption and the next commit in
this patchset covers the second.

Fixes: 354e8f1970f8 ("bpf: Support <8-byte scalar spill and refill")
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-combo: fix runtime suspend

commit c7b98de745cffdceefc077ad5cf9cda032ef8959 upstream.

Drop the confused runtime-suspend type check which effectively broke
runtime PM if the DP child node happens to be parsed before the USB
child node during probe (e.g. due to order of child nodes in the
devicetree).

Instead use the new driver data USB PHY pointer to access the USB
configuration and resources.

Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[swboyd@chromium.org: Backport to pre-split driver. Note that the
condition is kept so that ufs and pcie don't do anything as before]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-combo: fix broken power on

commit 7a7d86d14d073dfa3429c550667a8e78b99edbd4 upstream.

The PHY is powered on during phy-init by setting the SW_PWRDN bit in the
COM_POWER_DOWN_CTRL register and then setting the same bit in the in the
PCS_POWER_DOWN_CONTROL register that belongs to the USB part of the
PHY.

Currently, whether power on succeeds depends on probe order and having
the USB part of the PHY be initialised first. In case the DP part of the
PHY is instead initialised first, the intended power on of the USB block
results in a corrupted DP_PHY register (e.g. DP_PHY_AUX_CFG8).

Add a pointer to the USB part of the PHY to the driver data and use that
to power on the PHY also if the DP part of the PHY is initialised first.

Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Cc: stable@vger.kernel.org # 5.10
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[swboyd@chromium.org: Backport to pre-split driver, also set usb_phy for
pcie/ufs]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-usb: fix memleak on probe deferral

commit a5d6b1ac56cbd6b5850a3a54e35f1cb71e8e8cdd upstream.

Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.

Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.

Two bindings currently rely on overlapping mappings for the PCS region
so fallback to non-exclusive mappings for those for now.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[swboyd@chromium.org: Backport to pre-split driver]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-combo: fix memleak on probe deferral

commit 2de8a325b1084330ae500380cc27edc39f488c30 upstream.

Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.

Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-combo: disable runtime PM on unbind

commit 4382d518d1887e62234560ea08a0203d11d28cc1 upstream.

Make sure to disable runtime PM also on driver unbind.

Fixes: ac0d239936bd ("phy: qcom-qmp: Add support for runtime PM").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dma: Fix DMA Rx rearm race

commit 57e9af7831dcf211c5c689c2a6f209f4abdf0bce upstream.

As DMA Rx can be completed from two places, it is possible that DMA Rx
completes before DMA completion callback had a chance to complete it.
Once the previous DMA Rx has been completed, a new one can be started
on the next UART interrupt. The following race is possible
(uart_unlock_and_check_sysrq_irqrestore() replaced with
spin_unlock_irqrestore() for simplicity/clarity):

CPU0 CPU1
dma_rx_complete()
serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma_flush()
      __dma_rx_complete()
        dma->rx_running = 0
        // Complete DMA Rx
  spin_unlock_irqrestore(&port->lock)

serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma()
      dma->rx_running = 1
      // Setup a new DMA Rx
  spin_unlock_irqrestore(&port->lock)

  spin_lock_irqsave(&port->lock)
  // sees dma->rx_running = 1
  __dma_rx_complete()
    dma->rx_running = 0
    // Incorrectly complete
    // running DMA Rx

This race seems somewhat theoretical to occur for real but handle it
correctly regardless. Check what is the DMA status before complething
anything in __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>