Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and 'clk-debugfs' into clk-next

 - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs

* clk-actions:
  MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
  clk: actions: Add Actions S500 SoC Reset Management Unit support
  dt-bindings: reset: Add binding constants for Actions S500 RMU
  clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
  dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
  clk: actions: Fix h_clk for Actions S500 SoC

* clk-rockchip:
  clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
  clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"
  clk: rockchip: use separate compatibles for rk3288w-cru
  dt-bindings: clocks: add rk3288w variant compatible
  clk: rockchip: Handle clock tree for rk3288w variant
  clk: rockchip: convert rk3036 pll type to use internal lock status
  clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout
  clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout

* clk-iproc:
  clk: iproc: round clock rate to the closest

* clk-intel:
  clk: intel: Avoid unnecessary memset by improving code
  clk: intel: Improve locking in the driver
  clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()

* clk-debugfs:
  clk: Add support for enabling/disabling clocks from debugfs

Merge branches 'clk-https', 'clk-renesas', 'clk-kconfig', 'clk-amlogic' and 'clk-imx' into clk-next

* clk-https:
  Replace HTTP links with HTTPS ones: Common CLK framework

* clk-renesas:
  clk: renesas: cpg-mssr: Add r8a774e1 support
  dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
  clk: renesas: Add r8a774e1 CPG Core Clock Definitions
  dt-bindings: power: Add r8a774e1 SYSC power domain definitions
  clk: renesas: rzg2: Mark RWDT clocks as critical
  clk: renesas: rcar-gen3: Mark RWDT clocks as critical
  clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot
  dt-bindings: clock: renesas: cpg: Convert to json-schema

* clk-kconfig:
  clk: hsdk: Fix bad dependency on IOMEM
  clk: Specify IOMEM dependency for HSDK pll driver
  clk: Drop duplicate selection in Kconfig
  clk: AST2600: Add mux for EMMC clock
  clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER

* clk-amlogic:
  clk: meson: meson8b: add the vclk2_en gate clock
  clk: meson: meson8b: add the vclk_en gate clock
  clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
  clk: meson: g12a: Add support for NNA CLK source clocks
  dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs

* clk-imx:
  clk: imx: vf610: add CAAM clock
  clk: imx8mp: add mu root clk

Merge branches 'clk-socfpga', 'clk-doc', 'clk-qcom', 'clk-vc5' and 'clk-bcm' into clk-next

 - Enable CPU clks on Qualcomm IPQ6018 SoCs
 - Enable CPU clks on Qualcomm MSM8996 SoCs
 - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
 - Audio clks on Qualcomm SC7180 SoCs
 - Make defines for bcm63xx-gate clks to use in DT
 - Support gate clks on BCM6318 SoCs
 - Add HDMI clks for BCM2711 SoCs
 - Support BCM2711 SoC firmware clks

* clk-socfpga:
  clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clk
  clk: socfpga: agilex: add nand_x_clk and nand_ecc_clk
  dt-bindings: agilex: add NAND_X_CLK and NAND_ECC_CLK

* clk-doc:
  clk: Clean up kernel-doc errors
  clk: <linux/clk-provider.h>: drop a duplicated word
  clk: add function documentation for clk_hw_round_rate()

* clk-qcom: (38 commits)
  dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180
  clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk
  clk: qcom: gcc-sdm660: Add missing modem reset
  clk: qcom: lpass: Add support for LPASS clock controller for SC7180
  clk: qcom: gcc: Add support for GCC LPASS clock for SC7180
  dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
  clk: qcom: gdsc: Add support to enable retention of GSDCR
  clk: qcom: Export gdsc_gx_do_nothing_enable() to modules
  clk: qcom: Add graphics clock controller driver for SM8250
  clk: qcom: Add graphics clock controller driver for SM8150
  clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
  dt-bindings: clock: add SM8250 QCOM Graphics clock bindings
  dt-bindings: clock: add SM8150 QCOM Graphics clock bindings
  dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc
  clk: qcom: gcc: remove unnecessary vco_table from SM8150
  clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll
  clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid
  clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
  clk: qcom: gcc: fix sm8150 GPU and NPU clocks
  dt-bindings: clock: Fix qcom,msm8996-apcc yaml syntax
  ...

* clk-vc5:
  clk: vc5: use a dedicated struct to describe the output drivers
  dt-bindings: clk: versaclock5: convert to yaml
  MAINTAINERS: take over IDT VersaClock 5 clock driver
  dt-bindings: clk: versaclock5: fix 'idt' prefix typos
  clk: vc5: Add memory check to prevent oops
  clk: vc5: fix use of memory after it has been kfree'd
  clk: vc5: Enable addition output configurations of the Versaclock
  dt: Add additional option bindings for IDT VersaClock
  clk: vc5: Allow Versaclock driver to support multiple instances

* clk-bcm: (44 commits)
  clk: bcm2835: Do not use prediv with bcm2711's PLLs
  dt-bindings: arm: bcm: Add a select to the RPI Firmware binding
  clk: bcm: dvp: Add missing module informations
  clk: bcm: rpi: Remove the quirks for the CPU clock
  clk: bcm2835: Don't cache the PLLB rate
  clk: bcm2835: Allow custom CCF flags for the PLLs
  Revert "clk: bcm2835: remove pllb"
  clk: bcm: rpi: Give firmware clocks a name
  clk: bcm: rpi: Discover the firmware clocks
  clk: bcm: rpi: Add an enum for the firmware clocks
  clk: bcm: rpi: Add DT provider for the clocks
  clk: bcm: rpi: Make the PLLB registration function return a clk_hw
  clk: bcm: rpi: Split pllb clock hooks
  clk: bcm: rpi: Rename is_prepared function
  clk: bcm: rpi: Pass the clocks data to the firmware function
  clk: bcm: rpi: Add clock id to data
  clk: bcm: rpi: Create a data structure for the clocks
  clk: bcm: rpi: Use CCF boundaries instead of rolling our own
  clk: bcm: rpi: Make sure the clkdev lookup is removed
  clk: bcm: rpi: Switch to clk_hw_register_clkdev
  ...

clk: bcm2835: Do not use prediv with bcm2711's PLLs

Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask when running on
bcm2711.

Note that, since the prediv configuration bits were re-purposed, this
was triggering miscalculations on all clocks hanging from the VPU clock,
notably the aux UART, making its output unintelligible.

Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: hsdk: Fix bad dependency on IOMEM

CONFIG_IOMEM does not exist.  The correct symbol to depend on is
CONFIG_HAS_IOMEM.

Fixes: 1e7468bd9d30a21e ("clk: Specify IOMEM dependency for HSDK pll driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200803084835.21838-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge branch 'clk-fixes' into clk-kconfig

Need to merge this up to get the IOMEM dependency patch on top that is
broken and fixed in the next commit.

* clk-fixes:
  clk: Specify IOMEM dependency for HSDK pll driver
  clk: AST2600: Add mux for EMMC clock
  clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER

dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180

The YAML schemas that landed forgot one clock: "bi_tcxo".  Presumably
the bindings were developed against the v4 version of the driver and
when the ".name" was removed in v5 of the driver things broke.

While touching this, add the needed includes in each example.  I
believe both examples are supposed to be independent of each other.

Let's fix the bindings.

Fixes: 381cc6f97cda ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200731133006.1.Iee81b115f5be50d6d69500fe1bda11bba6e16143@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk

Add missing halt_check, hwcg_reg and hwcg_bit properties.
These were likely omitted when porting the driver upstream.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200726111215.22361-9-konradybcio@gmail.com
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-sdm660: Add missing modem reset

This will be required in order to support the
modem upstream.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200726111215.22361-2-konradybcio@gmail.com
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: lpass: Add support for LPASS clock controller for SC7180

The Low Power Audio subsystem clocks are required for Audio client
to be able to request for the clocks and power domains.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1595606878-2664-5-git-send-email-tdas@codeaurora.org
[sboyd@kernel.org: Drop unused ret in probe function]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc: Add support for GCC LPASS clock for SC7180

Add the GCC lpass clock which is required to access the LPASS core
clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1595606878-2664-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180

The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Also add clock ids for GCC
LPASS and LPASS Core clock IDs for LPASS client to request for the clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1595606878-2664-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gdsc: Add support to enable retention of GSDCR

Add support for the RETAIN_FF_ENABLE feature which enables the
usage of retention registers. These registers maintain their
state after disabling and re-enabling a GDSC.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1595606878-2664-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Clean up kernel-doc errors

Two things aren't documented causing kernel-doc to fail when checking
the core clk.c file. Fix them so that this file is clean.

Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200622090935.213833-1-sboyd@kernel.org

clk: qcom: Export gdsc_gx_do_nothing_enable() to modules

A clk driver can be a module but the gdsc code is in the common module.
Export this symbol so that allmodconfig builds keep working.

Cc: Jonathan Marek <jonathan@marek.ca>
Fixes: 0638226dd095 ("clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200724094025.3261266-1-sboyd@kernel.org

clk: Add support for enabling/disabling clocks from debugfs

For test and debug purposes, it's simple enough to enable or disable
clocks from shell. Add a new debugfs file 'clk_prepare_enable' that
calls clk_prepare_enable() when writing "1" and clk_disable_unprepare()
when writing "0".

This can have security implications, so only support it when the code
has been modified to #define CLOCK_ALLOW_WRITE_DEBUGFS.

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20200630003024.6282-1-mdtipton@codeaurora.org
[sboyd@kernel.org: Reword commit text and remove comment update]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: intel: Avoid unnecessary memset by improving code

memset can be avoided in a loop if the variables used are declared
inside the loop. Move such variables declaration inside the loop
to avoid memset.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/26624b65d0e6b958c4765a406b9929d1a9ce1c2c.1594880946.git.rahul.tanwar@linux.intel.com
[sboyd@kernel.org: Drop NULL assignment that is overwritten]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: intel: Improve locking in the driver

Remove/reduce unnecessary spin locking of the code.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/79c0f5f9f5bc512a7e2b5f3c91f6341f28b5854c.1594880946.git.rahul.tanwar@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()

To ensure that clks are unregistered in case of any failure, use
devm_clk_hw_register() instead of clk_hw_register().

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/7ef7009b4e9f986fd6dfbf487c0e85de68a4ba9b.1594880946.git.rahul.tanwar@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: iproc: round clock rate to the closest

Change from 'DIV_ROUND_UP' to 'DIV_ROUND_CLOSEST' when calculating the
clock divisor in the iProc ASIU clock driver to allow to get to the
closest clock rate.

Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support")
Signed-off-by: Lori Hikichi <lhikichi@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Link: https://lore.kernel.org/r/20200612225212.124301-1-ray.jui@broadcom.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add graphics clock controller driver for SM8250

Add support for the graphics clock controller found on SM8250
based devices.

This is initially copied from the downstream kernel, but has
been modified to more closely match the upstream sc7180 driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-12-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add graphics clock controller driver for SM8150

Add support for the graphics clock controller found on SM8150
based devices.

This is initially copied from the downstream kernel, but has
been modified to more closely match the upstream sc7180 driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-11-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers

All gpucc drivers need this, so move it to common code instead of
duplicating it in every gpucc driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-10-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: add SM8250 QCOM Graphics clock bindings

Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8250 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-9-jonathan@marek.ca
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: add SM8150 QCOM Graphics clock bindings

Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8150 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-8-jonathan@marek.ca
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc

These two bindings are almost identical, so combine them into one. This
will make it easier to add the sm8150 and sm8250 gpucc bindings.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-7-jonathan@marek.ca
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc: remove unnecessary vco_table from SM8150

The fixed alpha pll ops only use it for clamping in round_rate, which is
unnecessary. This is consistent with SM8250 GCC not using vco_table.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-6-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll

Lucid PCAL_DONE is different from trion.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-5-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid

Fixed ops were already identical, this adds support for non-fixed ops by
sharing between trion and lucid.

This also changes the names for trion ops to be consistent with the rest.

Note LUCID_PCAL_DONE is renamed to TRION_PCAL_DONE because it is wrong for
lucid, LUCID_PCAL_DONE should be BIT(27). Next patch will address this.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-4-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL

0x44 isn't a register offset, it is the value that goes into CAL_L_VAL.

Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc: fix sm8150 GPU and NPU clocks

Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it
should be a 500us delay and not skip, however this matches what was done
for other clocks that had 500us delay in downstream.

Fixes: f73a4230d5bb ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-2-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: vc5: use a dedicated struct to describe the output drivers

Reusing the generic struct vc5_hw_data for all blocks is handy. However it
implies we allocate space the div_int and div_frc fields even for the
output drivers where they are unused, and the clk_output_cfg0 and
clk_output_cfg0_mask fields for all components even though they are used
only for the output drivers.

Use a dedicated struct for the output drivers so that each block uses
exactly the fields it needs, not more.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20200723072603.1795-1-luca@lucaceresoli.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: versaclock5: convert to yaml

Convert to yaml the VersaClock bindings document. The mapping between
clock specifier and physical pins cannot be described formally in yaml
schema, then keep it verbatim in the description field.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20200723074112.3159-4-luca@lucaceresoli.net
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

MAINTAINERS: take over IDT VersaClock 5 clock driver

Marek has been the primary developer of this driver (thanks!). Now as
he is not working on it anymore he suggested I take over maintainership.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20200723074112.3159-3-luca@lucaceresoli.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: versaclock5: fix 'idt' prefix typos

'idt' is misspelled 'itd' in a few places, fix it.

Fixes: 34662f6e3084 ("dt: Add additional option bindings for IDT VersaClock")
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200723074112.3159-2-luca@lucaceresoli.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: arm: bcm: Add a select to the RPI Firmware binding

The RaspberryPi firmware binding uses two compatible, include simple-bus.
The select statement generated by default will thus select any node that
has simple-bus, not all of them being the raspberrypi firmware node.

This results in warnings being wrongfully reported. Let's add a custom
select statement to fix that.

Fixes: d4c708c032df ("dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200626115433.125735-1-maxime@cerno.tech
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'v5.9-rockchip-clk1' of git://git./linux/kernel/git/mmind/linux-rockchip into clk-rockchip

Pull Rockchip clk driver updates from Heiko Stuebner:

Use poll_timeout functions for pll lock-waiting and move the rk3036 to use
the available lock-status in pll-registers instead of reading it from the
General Register Files. Handle the clock variants on the rk3288w, revert
the mmc sample shift change on rk3328 and make the mac_lbtest clock
critical on rk3188.

* tag 'v5.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
  clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"
  clk: rockchip: use separate compatibles for rk3288w-cru
  dt-bindings: clocks: add rk3288w variant compatible
  clk: rockchip: Handle clock tree for rk3288w variant
  clk: rockchip: convert rk3036 pll type to use internal lock status
  clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout
  clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout

clk: vc5: Add memory check to prevent oops

When getting the names of the child nodes, kasprintf is used to
allocate memory which is used to create the string for the node
name.  Unfortunately, there is no memory check to determine
if this allocation fails, it may cause an error when trying
to get child node name.

This patch will check if the memory allocation fails, and returns
and -ENOMEM error instead of blindly moving on.

Fixes: 260249f929e8 ("clk: vc5: Enable addition output configurations of the Versaclock")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20200716122620.4538-1-aford173@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: vc5: fix use of memory after it has been kfree'd

There are a several places where printing an error message of
init.name occurs after init.name has been kfree'd. Also the failure
message is duplicated each time in the code. Fix this by adding
a registration error failure path for these cases, moving the
duplicated error messages to one common point and kfree'ing init.name
only after it has been used.

Changes also shrink the object code size by 171 bytes (x86-64, gcc 9.3):

Before:
   text    data     bss     dec     hex filename
  21057    3960      64   25081    61f9 drivers/clk/clk-versaclock5.o

After:
   text    data     bss     dec     hex filename
  20886    3960      64   24910    614e drivers/clk/clk-versaclock5.o

Addresses-Coverity: ("Use after free")
Fixes: f491276a5168 ("clk: vc5: Allow Versaclock driver to support multiple instances")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200625132736.88832-1-colin.king@canonical.com
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[sboyd@kernel.org: Drop stray newline]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Fix qcom,msm8996-apcc yaml syntax

Fix errors reported by dt_binding_check.
- Fix literal block scalar for dts example
- Fix schema identifier URI

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1595326714-20485-1-git-send-email-loic.poulain@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks

Since the loopbacktest clock is not exported and is not touched in the
driver, it has to be added to rk3188_critical_clocks to be protected from
being disabled and in order to get the emac working.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20200722161820.5316-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs

Add a reset binding entry to match all members of Actions Semi Owl SoCs.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/78d63d97e3a8a8f7a9048b6eec74a9d158578833.1593788312.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: actions: Add Actions S500 SoC Reset Management Unit support

Add Reset Management Unit (RMU) support for Actions Semi S500 SoC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/3fba2e6f0edfac97cb8c6ce60f95c24852578eac.1593788312.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: reset: Add binding constants for Actions S500 RMU

Add device tree binding constants for Actions Semi S500 SoC Reset
Management Unit (RMU).

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/daf615160b3be9f38dcf7926cc82128c9c2d73e3.1593788312.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC

Add support for the missing APB, DMAC and GPIO clocks in the Actions
Semi S500 SoC clock driver.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/87964ae012e513597b8b4c7be2e7ac332a70087a.1593788312.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC

Add the missing APB, DMAC and GPIO clock bindings constants for
Actions Semi S500 SoC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/67112af4f5bc0cc5e70ce8410feb369cc72972b8.1593788312.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: actions: Fix h_clk for Actions S500 SoC

The h_clk clock in the Actions Semi S500 SoC clock driver has an
invalid parent. Replace with the correct one.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'clk-imx-5.9' of git://git./linux/kernel/git/shawnguo/linux into clk-imx

Pull i.MX clk updates from Shawn Guo:

 - Add CAAM clock support for vf610 driver
 - Add MU root clock support for imx8mp driver

* tag 'clk-imx-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: vf610: add CAAM clock
  clk: imx8mp: add mu root clk

Merge tag 'clk-meson-v5.9-1' of https://github.com/BayLibre/clk-meson into clk-amlogic

Pull Amlogic clk driver updates from Jerome Brunet:

 - g12: add neural network accelerator clock sources
 - meson8: remove critical flag for main PLL divider
 - meson8: add video decoder clock gates

* tag 'clk-meson-v5.9-1' of https://github.com/BayLibre/clk-meson:
  clk: meson: meson8b: add the vclk2_en gate clock
  clk: meson: meson8b: add the vclk_en gate clock
  clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
  clk: meson: g12a: Add support for NNA CLK source clocks
  dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs

Merge tag 'clk-renesas-for-v5.9-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Add support for the new RZ/G2H (R8A774E1) SoC

* tag 'clk-renesas-for-v5.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: cpg-mssr: Add r8a774e1 support
  dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
  clk: renesas: Add r8a774e1 CPG Core Clock Definitions
  dt-bindings: power: Add r8a774e1 SYSC power domain definitions

clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845

The display gpll0 branch clock inside GCC needs to always be enabled.
Otherwise the AHB clk (disp_cc_mdss_ahb_clk_src) for the display clk
controller (dispcc) will stop clocking while sourcing from gpll0 when
this branch inside GCC is turned off during unused clk disabling. We can
never turn this branch off because the AHB clk for the display subsystem
is needed to read/write any registers inside the display subsystem
including clk related ones. This makes this branch a really easy way to
turn off AHB access to the display subsystem and cause all sorts of
mayhem. Let's just make the clk ops keep the clk enabled forever and
ignore any attempts to disable this clk so that dispcc accesses keep
working.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reported-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/1594796050-14511-1-git-send-email-tdas@codeaurora.org
Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
[sboyd@kernel.org: Fill out commit text more]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

ipq806x: gcc: add support for child probe

Add support for child probing needed for tsens driver that share the
same regs of gcc for this platform.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20200716022817.30439-2-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static

The sparse tool complains as follows:

drivers/clk/qcom/clk-cpu-8996.c:341:19: warning:
 symbol 'cpu_msm8996_clks' was not declared. Should it be static?

This variable is not used outside of clk-cpu-8996.c, so this commit
marks it static.

Fixes: 03e342dc45c9 ("clk: qcom: Add CPU clock driver for msm8996")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200714142155.35085-1-weiyongjun1@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: ipq8074: Add correct index for PCIe clocks

The PCIe clocks GCC_PCIE0_AXI_S_BRIDGE_CLK, GCC_PCIE0_RCHNG_CLK_SRC,
GCC_PCIE0_RCHNG_CLK are wrongly added to the gcc reset group.

Move them to the gcc clock group.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1594877570-9280-1-git-send-email-sivaprak@codeaurora.org
Fixes: e7fb524cfcca ("dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: <linux/clk-provider.h>: drop a duplicated word

Drop the repeated word "not" in a comment.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20200719002830.20319-1-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: renesas: cpg-mssr: Add r8a774e1 support

Add support for the RZ/G2H (R8A774E1) SoC to the Renesas Clock
Pulse Generator / Module Standby and Software Reset driver.

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
[geert: Mark RWDT critical, cfr. commit f23f1101ad0ef1ac ("clk: renesas: rcar-gen3: Mark RWDT clocks as critical")]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1

Add binding documentation for the RZ/G2H (R8A774E1) Clock Pulse Generator
driver.

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'renesas-r8a774e1-dt-binding-defs-tag' into clk-renesas-for-v5.9

Renesas RZ/G2H DT Binding Definitions

Clock and Power Domain definitions for the Renesas RZ/G2H (R8A774E1)
SoC, shared by driver and DT source files.

clk: renesas: Add r8a774e1 CPG Core Clock Definitions

Add all RZ/G2H Clock Pulse Generator Core Clock Outputs, as listed in
Table 11.2 ("List of Clocks [RZ/G2H]") of the RZ/G2H Hardware User's
Manual.

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: power: Add r8a774e1 SYSC power domain definitions

This patch adds power domain indices for the RZ/G2H (r8a774e1) SoC.

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: Specify IOMEM dependency for HSDK pll driver

The HSDK pll driver uses the devm_ioremap_resource function, but does
not specify a dependency on IOMEM in Kconfig. This causes a build
failure on architectures without IOMEM, for example, UML (notably with
make allyesconfig).

Fix this by making CONFIG_CLK_HSDK depend on CONFIG_IOMEM.

Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20200630043214.1080961-1-davidgow@google.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Drop duplicate selection in Kconfig

There is no need to select RATIONAL in individual drivers,
since common clock symbol does it already.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200614115140.41262-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: smd: Add support for MSM8992/4 rpm clocks

Add rpm smd clocks, PMIC and bus clocks which are required on MSM8992,
MSM8994 (and APQ variants) for clients to vote on.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623230018.303776-1-konradybcio@gmail.com
[sboyd@kernel.org: Fixed up binding numbers]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: AST2600: Add mux for EMMC clock

The EMMC clock can be derived from either the HPLL or the MPLL. Register
a clock mux so that the rate is calculated correctly based upon the
parent.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200709195706.12741-2-eajames@linux.ibm.com
Acked-by: Joel Stanley <joel@jms.id.au>
Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: ipq8074: Add missing clocks for pcie

Add missing clocks and resets for pcie port0 of ipq8074 devices.

Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1593940680-2363-5-git-send-email-sivaprak@codeaurora.org
[sboyd@kernel.org: Make freq table static const]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe

Add missing clock bindings for PCIe port0 of ipq8074.

Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1593940680-2363-4-git-send-email-sivaprak@codeaurora.org
[sboyd@kernel.org: Clean up commit text subject]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER

When building arm32 allmodconfig:

ld.lld: error: undefined symbol: ap_cp_unique_name
>>> referenced by ap-cpu-clk.c
>>>               clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a

ap_cp_unique_name is only compiled into the kernel image when
CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable).
However, CONFIG_ARMADA_AP_CPU_CLK does not select it.

This has been a problem since the driver was added to the kernel but it
was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq
driver needs ap cpu clk") so it was never noticed.

Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200701201128.2448427-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'clk-renesas-for-v5.9-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - One more conversion of DT bindings to json-schema
  - Enhance critical clock handling to only consider clocks that were
    enabled at boot time, and use it for watchdog clock handling on
    R-Car Gen3 and RZ/G2 SoCs

* tag 'clk-renesas-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: rzg2: Mark RWDT clocks as critical
  clk: renesas: rcar-gen3: Mark RWDT clocks as critical
  clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot
  dt-bindings: clock: renesas: cpg: Convert to json-schema

Replace HTTP links with HTTPS ones: Common CLK framework

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200703175114.15027-1-grandmaster@al2klimov.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add CPU clock driver for msm8996

Each of the CPU clusters (Power and Perf) on msm8996 are
clocked via 2 PLLs, a primary and alternate. There are also
2 Mux'es, a primary and secondary all connected together
as shown below

                             +-------+
              XO             |       |
          +------------------>0      |
                             |       |
                   PLL/2     | SMUX  +----+
                     +------->1      |    |
                     |       |       |    |
                     |       +-------+    |    +-------+
                     |                    +---->0      |
                     |                         |       |
+---------------+    |             +----------->1      | CPU clk
|Primary PLL    +----+ PLL_EARLY   |           |       +------>
|               +------+-----------+    +------>2 PMUX |
+---------------+      |                |      |       |
                       |   +------+     |   +-->3      |
                       +--^+  ACD +-----+   |  +-------+
+---------------+          +------+         |
|Alt PLL        |                           |
|               +---------------------------+
+---------------+         PLL_EARLY

The primary PLL is what drives the CPU clk, except for times
when we are reprogramming the PLL itself (for rate changes) when
we temporarily switch to an alternate PLL. A subsequent patch adds
support to switch between primary and alternate PLL during rate
changes.

The primary PLL operates on a single VCO range, between 600MHz
and 3GHz. However the CPUs do support OPPs with frequencies
between 300MHz and 600MHz. In order to support running the CPUs
at those frequencies we end up having to lock the PLL at twice
the rate and drive the CPU clk via the PLL/2 output and SMUX.

So for frequencies above 600MHz we follow the following path
 Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk
and for frequencies between 300MHz and 600MHz we follow
 Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk

ACD stands for Adaptive Clock Distribution and is used to
detect voltage droops.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Ilia Lin:  - reworked clock registering
           - Added clock-tree diagram
           - non-builtin support
           - clock notifier on rate change
           - https://lkml.org/lkml/2018/5/24/123

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain: - fixed driver remove / clk deregistering
              - Removed useless memory barriers
              - devm usage when possible
              - Fixed Kconfig depends

Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996

Each of the CPU clusters (Power and Perf) on msm8996 are
clocked via 2 PLLs, a primary and alternate. There are also
2 Mux'es, a primary and secondary all connected together
as shown below

                             +-------+
              XO             |       |
          +------------------>0      |
                             |       |
                   PLL/2     | SMUX  +----+
                     +------->1      |    |
                     |       |       |    |
                     |       +-------+    |    +-------+
                     |                    +---->0      |
                     |                         |       |
+---------------+    |             +----------->1      | CPU clk
|Primary PLL    +----+ PLL_EARLY   |           |       +------>
|               +------+-----------+    +------>2 PMUX |
+---------------+      |                |      |       |
                       |   +------+     |   +-->3      |
                       +--^+  ACD +-----+   |  +-------+
+---------------+          +------+         |
|Alt PLL        |                           |
|               +---------------------------+
+---------------+         PLL_EARLY

The primary PLL is what drives the CPU clk, except for times
when we are reprogramming the PLL itself (for rate changes) when
we temporarily switch to an alternate PLL. A subsequent patch adds
support to switch between primary and alternate PLL during rate
changes.

The primary PLL operates on a single VCO range, between 600MHz
and 3GHz. However the CPUs do support OPPs with frequencies
between 300MHz and 600MHz. In order to support running the CPUs
at those frequencies we end up having to lock the PLL at twice
the rate and drive the CPU clk via the PLL/2 output and SMUX.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1593766185-16346-4-git-send-email-loic.poulain@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

soc: qcom: Separate kryo l2 accessors from PMU driver

The driver provides kernel level API for other drivers
to access the MSM8996 L2 cache registers.
Separating the L2 access code from the PMU driver and
making it public to allow other drivers use it.
The accesses must be separated with a single spinlock,
maintained in this driver.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: meson: meson8b: add the vclk2_en gate clock

HHI_VIID_CLK_CNTL[19] is not part of the public S805 datasheet. However,
the GXBB driver defines this bit as a gate called "vclk2" and in the
3.10 kernel GPL code dump the following line can found:
  WRITE_LCD_CBUS_REG_BITS(HHI_VIID_CLK_CNTL, 0, 19, 1); //disable vclk2_en

Add this gate clock to the Meson8/Meson8b/Meson8m2 clock controller to
complete the VCLK2 clock tree.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200629203904.2989007-3-martin.blumenstingl@googlemail.com

clk: meson: meson8b: add the vclk_en gate clock

HHI_VID_CLK_CNTL[19] is documented as CLK_EN0. This description is the
same in the public S912 datasheet and the GXBB driver calls this gate
"vclk". Add this gate clock to the Meson8/Meson8b/Meson8m2 clock
controller because it's needed to make the video output work.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200629203904.2989007-2-martin.blumenstingl@googlemail.com

clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"

This reverts commit 82f4b67f018c88a7cc9337f0067ed3d6ec352648.

According to a subsequent revert in the vendor kernel, the original
change was based on unclear documentation and was in fact incorrect.

Emprically, my board's HS200 eMMC at 200MHZ apparently gets lucky with a
phase where this had no impact, but limiting max-frequency to 150MHz to
match the nominal capability of the I/O pins made it virtually unusable,
constantly throwing errors and retuning. With this revert, it starts
behaving perfectly at 150MHz too.

Fixes: 82f4b67f018c ("clk: rockchip: fix wrong mmc sample phase shift for rk3328")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/c80eb52e34c03f817586b6b7912fbd4e31be9079.1589475794.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: use separate compatibles for rk3288w-cru

Commit 1627f683636d ("clk: rockchip: Handle clock tree for rk3288w variant")
added the check for rk3288w-specific clock-tree changes but in turn would
require a double-compatible due to re-using the main rockchip,rk3288-cru
compatible as entry point.

The binding change actually describes the compatibles as one or the other
so adapt the code accordingly and add a real second entry-point for the
clock controller.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # rock-pi-n8
Link: https://lore.kernel.org/r/20200703154948.260369-1-heiko@sntech.de

clk: qcom: Fix return value check in apss_ipq6018_probe()

In case of error, the function dev_get_regmap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200628023055.50608-1-weiyongjun1@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm: dvp: Add missing module informations

The driver for the DVP controller in the BCM2711 was missing the MODULE_*
macros resulting in a modpost warning at compilation.

Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200626112513.90816-1-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2

Drop CLK_IS_CRITICAL from fclk_div2. This was added because we didn't
know the relation between this clock and RGMII Ethernet. It turns out
that fclk_div2 is used as "timing adjustment clock" to generate the RX
delay on the MAC side - which was enabled by u-boot on Odriod-C1. When
using the RX delay on the PHY side or not using a RX delay at all then
this clock can be disabled.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200620161422.24114-1-martin.blumenstingl@googlemail.com

clk: imx: vf610: add CAAM clock

According to Vybrid Security RM, CCM_CCGR11[CG176] can be used to gate
CAAM ipg clock.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-imx@nxp.com
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8mp: add mu root clk

Add mu root clk for mu mailbox usage.

Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: vc5: Enable addition output configurations of the Versaclock

The existing driver is expecting the Versaclock to be pre-programmed,
and only sets the output frequency.  Unfortunately, not all devices
are pre-programmed, and the Versaclock chip has more options beyond
just the frequency.

This patch enables the following additional features:

   - Programmable voltage: 1.8V, 2.5V, or 3.3V​
   - Slew Percentage of normal: 85%, 90%, or 100%
   - Output Type: LVPECL, CMOS, HCSL, or LVDS

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20200603154329.31579-3-aford173@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt: Add additional option bindings for IDT VersaClock

The VersaClock driver now supports some additional bindings to support
child nodes which can configure optional settings like mode, voltage
and slew.

This patch updates the binding document to describe what is available
in the driver.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200603154329.31579-2-aford173@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: vc5: Allow Versaclock driver to support multiple instances

Currently, the Versaclock driver is only expecting one instance and
uses hard-coded names for the various clock names.  Unfortunately,
this is a problem when there is more than one instance of the driver,
because the subsequent instantiations of the driver use the identical
name.  Each clock after the fist fails to load, because the clock
subsystem cannot handle two clocks with identical name.

This patch removes the hard-coded name arrays and uses kasprintf to
assign clock names based on names of their respective node and parent
node which gives each clock a unique identifying name.

For a verasaclock node with a name like:
   versaclock5: versaclock_som@6a

The updated clock names would appear like:
    versaclock_som.mux
       versaclock_som.out0_sel_i2cb
       versaclock_som.pfd
          versaclock_som.pll
             versaclock_som.fod3
                versaclock_som.out4
             versaclock_som.fod2
                versaclock_som.out3
             versaclock_som.fod1
                versaclock_som.out2
             versaclock_som.fod0
                versaclock_som.out1

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20200603154329.31579-1-aford173@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: smd: Add support for MSM8936 rpm clocks

Add missing definition of rpm clk for msm8936 soc (also used by msm8939)

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20200613072745.1249003-2-vincent.knecht@mailoo.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: rpmcc: Document MSM8936 compatible

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20200613072745.1249003-3-vincent.knecht@mailoo.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: renesas: rzg2: Mark RWDT clocks as critical

Ensures RWDT remains alert throughout the boot process if enabled.

This patch applies the change to the following SoCs: r8a774a1,
r8a774b1 and r8a774c0.

Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200616162626.27944-4-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: rcar-gen3: Mark RWDT clocks as critical

Ensures RWDT remains alert throughout the boot process if enabled.

This patch applies the change to the following SoCs: r8a77950, r8a77951,
r8a77960, r8a77961, r8a77965, r8a77970, r8a77980, r8a77990 and r8a77995.

Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200616162626.27944-3-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot

This allows us to add the RWDT clock to the list of critical clocks without
keeping it enabled needlessly if not used.

Changing the semantics of crit_mod_clks in this way is safe for the current
user (INTC-AP) because it is never off at boot time.

Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200616162626.27944-2-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: qcom: smd: Add support for SDM660 rpm clocks

Add rpm smd clocks, PMIC and bus clocks which are required on
SDM630/660 (and APQ variants) for clients to vote on.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200622090252.36568-1-konradybcio@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: add function documentation for clk_hw_round_rate()

Information about usage and prerequisites for this API.

Signed-off-by: Sarang Mairal <sarangmairal@gmail.com>
Link: https://lore.kernel.org/r/20200611021941.786-2-sarangmairal@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add ipq6018 apss clock controller

The CPU on Qualcomm ipq6018 devices are clocked primarily by a aplha PLL
and xo which are connected to a mux and enable block.

Add support for the mux and enable block which feeds the CPU on ipq6018
devices.

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-5-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add DT bindings for ipq6018 apss clock controller

Add dt-binding for ipq6018 apss clock controller

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-4-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add ipq apss pll driver

The CPUs on Qualcomm ipq based devices are clocked by an alpha PLL.
Add support for the apss pll found on ipq based devices which can
support CPU frequencies above 1Ghz.

Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-3-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: add ipq6018 a53 pll compatible

cpus on ipq6018 are clocked by a53 pll, add device compatible for a53
pll found on ipq6018 devices.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-2-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clk

Preliminary documentation documented the mpu_l2ram_clk, but since then,
the mpu_l2ram_clk is no longer documented. It's now referred to as
mpu_ccu_clk.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20200616202417.14376-3-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: agilex: add nand_x_clk and nand_ecc_clk

And the nand_x_clk and nand_ecc_clk. Make the nand_x_clk be the main
clock that is feeding the NAND IP and correct it's parent to be the
l4_mp_clk.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20200616202417.14376-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: agilex: add NAND_X_CLK and NAND_ECC_CLK

Add the NAND_X_CLK and NAND_ECC_CLK clocks.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20200616202417.14376-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm: rpi: Remove the quirks for the CPU clock

The CPU clock has had so far a bunch of quirks to expose the clock tree
properly, but since we reverted to exposing them through the MMIO driver,
we can remove that code from the firmware driver.

Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/acdf820c2f78a25dd7480a0c018b8b387acd013e.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm2835: Don't cache the PLLB rate

The PLLB rate will be changed through the firmware clocks drivers and will
change behind this drivers' back, so we don't want to cache the rate.

Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/9864daba2f584ed49aee5ed1d2f4d48507c58197.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>