rfkill: make new event layout opt-in

Again new complaints surfaced that we had broken the ABI here,
although previously all the userspace tools had agreed that it
was their mistake and fixed it. Yet now there are cases (e.g.
RHEL) that want to run old userspace with newer kernels, and
thus are broken.

Since this is a bit of a whack-a-mole thing, change the whole
extensibility scheme of rfkill to no longer just rely on the
message lengths, but instead require userspace to opt in via a
new ioctl to a given maximum event size that it is willing to
understand.

By default, set that to RFKILL_EVENT_SIZE_V1 (8), so that the
behaviour for userspace not calling the ioctl will look as if
it's just running on an older kernel.

Fixes: 14486c82612a ("rfkill: add a reason to the HW rfkill state")
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220316212749.16491491b270.Ifcb1950998330a596f29a2a162e00b7546a1d6d0@changeid

Merge tag 'mt76-for-kvalo-2022-03-16' of https://github.com/nbd168/wireless

mt76 patches for 5.18

- bugfixes
- mbssid support for mt7915
- 6 GHz support for mt7915
- mt7921u driver

rtw89: implement stop and resume channels transmission v1

These function is used to stop transmitting when we are going to switch
channels or do some RF calibration. Before these operations, we need to
stop channel transmission and backup setting into parameter tx_en. After
operations are done, resume transmitting by backup parameter tx_en.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-13-pkshih@realtek.com

rtw89: extend mac tx_en bits from 16 to 32

In order to support 8852C that uses 32 bits to control TX types.

This patch doesn't really use 32 bits tx_en yet, but next patch will
use it.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-12-pkshih@realtek.com

rtw89: change value assignment style of rtw89_mac_cfg_gnt()

Use if() style would be clear than "? :", because the else cases are
always 0. The read val from rtw89_mac_read_lte() isn't used, so remove
this statement.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-11-pkshih@realtek.com

rtw89: 8852c: add mac_ctrl_path and mac_cfg_gnt APIs

The BT-coexistence uses these function to control antenna and TDMA, so
implement the variant type to support all chips.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-10-pkshih@realtek.com

rtw89: disable FW and H2C function if CPU disabled

Initialize FW status and disabled H2C function if CPU disabled. Then, it
can reset to initial state.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-9-pkshih@realtek.com

rtw89: initialize preload window of D-MAC

8852C add new hardware feature -- preload window, which is used to load
more data to D-MAC, so it can possibly yield better performance.

This patch is to configure preload and reserved size for next window.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-8-pkshih@realtek.com

rtw89: modify MAC enable functions

Modify functions that control D-MAC (data MAC) and LDO to support variant
chips.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-7-pkshih@realtek.com

rtw89: add config_rf_reg_v1 to configure RF parameter tables

The format of RF parameter is changed; it doesn't encode delay parameters
into table, but the delay coding becomes regular pair of register address
and value.

To help firmware to recover RF register settings, we need to download
these parameters to firmware. For v1 format, only download partial
parameters (ignore them with addr < 0x100).

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-6-pkshih@realtek.com

rtw89: 8852c: add read/write rf register function

Using encoded address which BIT(16) is used to discriminate which region is
going to access. Illustrate the calling flow as below

rtw89_phy_write_rf_v1() -+-> rtw89_phy_write_rf()   // old interface
                         +-> rtw89_phy_write_rf_a() // new interface

Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-5-pkshih@realtek.com

rtw89: 8852c: add setting of TB UL TX power offset

Configure this TX power to indicate TX power offset that uses to transmit
TB (trigger base) uplink frames.
Also, shrink the unit of TX power offset changes to suitable type s8.

Signed-off-by: Yuan-Han Zhang <yuanhan1020@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-4-pkshih@realtek.com

rtw89: 8852c: add write/read crystal function in CFO tracking

The CFO tracking algorithm is the same, but control methods are different.
Set parameters via xtal serial interfaces (SI).

Signed-off-by: Yuan-Han Zhang <yuanhan1020@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-3-pkshih@realtek.com

rtw89: modify dcfo_comp to share with chips

The dcfo_comp is digital CFO (central frequency offset) compensation.
Since the flow can be shared with all chips, add chip parameters to support
variant register address and format.

Signed-off-by: Yuan-Han Zhang <yuanhan1020@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220317055543.40514-2-pkshih@realtek.com

rtw89: Fix spelling mistake "Mis-Match" -> "Mismatch"

There are some spelling mistakes in some literal strings. Fix them.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220316234242.55515-1-colin.i.king@gmail.com

brcmfmac: p2p: Fix spelling mistake "Comback" -> "Comeback"

There are some spelling mistakes in comments and brcmf_dbg messages.
Fix these.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220316233938.55135-1-colin.i.king@gmail.com

iwlwifi: mei: fix building iwlmei

Building iwlmei without CONFIG_CFG80211 causes a link-time warning:

ld.lld: error: undefined symbol: ieee80211_hdrlen
>>> referenced by net.c
>>>               net/wireless/intel/iwlwifi/mei/net.o:(iwl_mei_tx_copy_to_csme) in archive drivers/built-in.a

Add an explicit dependency to avoid this. In theory it should not
be needed here, but it also seems pointless to allow IWLMEI
for configurations without CFG80211.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Emmanuel Grumbach <Emmanuel.grumbach@intel.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220316183617.1470631-1-arnd@kernel.org

mt76: fix monitor rx FCS error in DFS channel

When setup monitor mode in DFS channel, mt76 send CH_SWITCH_DFS to
fw for channel config. This would cause rx performance bad while
monitoring frames. Settings CH_SWITCH_NORMAL in monitor mode would
get the same performance as normal channels.

Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: don't enable beacon filter when IEEE80211_CONF_CHANGE_MONITOR is set

IEEE80211_CONF_CHANGE_MONITOR would be set every time even when vif runs as
sta mode.

If vif runs as sta mode, the beacon filter would be falsely enabled
earlier than the associated state.

That is not the behavior the firmware expects and also breaks the original
logic of sta mode. Thus, we only limit the operation to set the beacon
filter only for monitor mode when IEEE80211_CONF_CHANGE_MONITOR is set.

Fixes: 4ad65a54617c ("mt76: mt7921: toggle runtime-pm adding a monitor vif")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix wrong HE data rate in sniffer tool

Due to the missing IEEE80211_RADIOTAP_HE_DATA1_BW_RU_ALLOC_KNOWN in
status report, the HE rate in wirehsark/tcpdump always shows wrong value.
Applications will refer to IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC
when the flag is set and shows the correct data rate.

Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce 802.11ax multi-bss support

Introduce mbss mcu APIs to enable 802.11ax multi-bss AP support for
mt7915 devices

Tested-by: Money Wang <money.wang@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Co-developed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: move mt7921_init_hw in a dedicated work

Firmware initialization can take a while. Move mt7921_init_hw routine in
a dedicated work in order to not slow down bootstrap process.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add mt7921u driver

Introduce support for MT7921U 802.11ax 2x2:2SS wireless devices.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: move mt7921_usb_sdio_tx_status_data in mac common code.

This is a preliminary patch to add mt7921u driver support.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: move mt7921_usb_sdio_tx_complete_skb in common mac code.

This is a preliminary patch to add mt7921u driver support.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: move mt7921_usb_sdio_tx_prepare_skb in common mac code

This is a preliminary patch to add mt7921u driver support.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: update mt7921_skb_add_usb_sdio_hdr to support usb

This is a preliminary patch to add mt7921u driver support.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: disable runtime pm for usb

Runtime-pm is not currently supported by usb driver

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: usb: introduce __mt76u_init utility routine

Introduce __mt76u_init unitility routine and move mt7615 usb bus ops
into mt7615 module in order to allow specifying driver specific
parameter.
This is a preliminary patch to add usb support to mt7921 driver.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: usb: add req_type to ___mt76u_wr signature

This is a preliminary patch to add usb support to mt7921 driver.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: usb: add req_type to ___mt76u_rr signature

This is a preliminary patch to add usb support to mt7921 driver.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix phy cap in mt7915_set_stream_he_txbf_caps()

This patch fixes performance issue of beamforming tx on
bandwidth 160MHz.

Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix beamforming mib stats

Some of beamforming mib counters are moved to different offsets
or registers in newer chipsets.

Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: set band1 TGID field in tx descriptor

Set proper group index of tx descriptor for band1.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix invalid rssi report

Drop invalid rssi value to calculate a reasonable report

Fixes: 4550fb9e9810 ("mt76: improve signal strength reporting")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use le32/16_get_bits() whenever possible

Switch to use le32/16_get_bits() to simplfy codes and specify
the size explicitly to avoid potential issues.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: make read-only array ba_range static const

Don't populate the read-only array ba_range on the stack but
instead make it static const. Also makes the object code a little
smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: check for devm_pinctrl_get() failure

If devm_pinctrl_get() fails then it leads to an error pointer
dereference.  Add a check to prevent that.

Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: get rid of mt7921_wait_for_mcu_init declaration

mt7921_wait_for_mcu_init is no longer used.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add txpower init for 6GHz

Add support to init txpower values of 6GHz band.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix eeprom fields of txpower init values

A-die 7976 has different offset and uses different channel group
definition on txpower init values.

Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add 6 GHz support

Basic 6 GHz support is added to mt76.
Modification includes:
1. Add 6 GHz E2P definition
2. Register 6 GHz HE cap
3. Refactor existing code of adding a STA

This adds support for Wi-Fi 6E on MT7986/MT7916.
Detailed link:
https://www.mediatek.com/products/mediatek-filogic-830
Detailed link:
https://www.mediatek.com/products/products/broadband-wifi/mediatek-filogic-630

Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <Shayne.Chen@mediatek.com>
Signed-off-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com>
Signed-off-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: add 6 GHz support for wtbl and starec configuration

Since there are no HT & VHT IEs being sent in 6ghz,
some capabilities judgement and parsing for wtbl &
starec configuration should be modified to reflect such changes.

Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: allow beaconing on all chains

This improves rate reach performance on units with polarized antennas.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix monitor mode crash with sdio driver

mt7921s driver may receive frames with fragment buffers. If there is a
CTS packet received in monitor mode, the payload is 10 bytes only and
need 6 bytes header padding after RXD buffer. However, only RXD in the
first linear buffer, if we pull buffer size RXD-size+6 bytes with
skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in
__skb_pull().

To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to
256 to make sure all MCU operation in linear buffer.

[   52.007562] kernel BUG at include/linux/skbuff.h:2313!
[   52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   52.007987] pc : skb_pull+0x48/0x4c
[   52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common]
[   52.008361] Call trace:
[   52.008377]  skb_pull+0x48/0x4c
[   52.008400]  mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c]
[   52.008431]  __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917]
[   52.008449]  kthread+0x148/0x3ac
[   52.008466]  ret_from_fork+0x10/0x30

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix mt7921_queues_acq implementation

Fix mt7921_queues_acq implementation according to the vendor sdk.

Fixes: 474a9f21e2e20 ("mt76: mt7921: add debugfs support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix xmit-queue dump for usb and sdio

Use proper xmit queue handler to dump queue stats.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: make mt7921_init_tx_queues static

mt7921 is only used in mt7921_dma_init routine.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: split single ldpc cap bit into bits

The original single LDPC cap bit cannot be used to
differentiate LDPC cap in each PHY mode.
This modification split the single bit into 3 bits,
ht_ldpc, vht_ldpc, and he_ldpc.

Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Suggested-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix DFS no radar detection event

Driver needs to carry region definition when radar detection starts.
Need to remap nl80211 DFS regions to chip region definition.

Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Rubio Lu <Rubio-DW.Lu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: use mt76_hw instead of open coding it

use mt76_hw instead of open coding it

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix up the monitor mode

Properly set up the monitor mode the firmware can support to fix up
RTS/CTS and beacon frames cannot be captured and forwarded to the host.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663u: introduce mt7663u_mcu_power_on routine

Introduce mt7663u_mcu_power_on utility routine since the code is shared
between mt7663u_mcu_init() and mt7663u_probe().

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: honor ret from mt7615_mcu_restart in mt7663u_mcu_init

Check return value of mt7615_mcu_restart routine in mt7663u_mcu_init().

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

rtw89: fix uninitialized variable of rtw89_append_probe_req_ie()

smatch reports that:
  fw.c:1997 rtw89_append_probe_req_ie() error: uninitialized symbol 'ret'.

This can be a issue only if no band is supported by the chip, but it is
impossible. So, it is still safe without this patch.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220311020007.20414-1-pkshih@realtek.com

MAINTAINERS: fix ath11k DT bindings location

Commit dae0978d4174 ("dt: bindings: net: add qcom,ath11k.yaml") obviously
adds qcom,ath11k.yaml, but the file entry in MAINTAINERS, added with
commit fcda1cb81663 ("MAINTAINERS: add DT bindings files for ath10k and
ath11k") then refers to qcom,ath11k.txt.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in QUALCOMM ATHEROS ATH11K WIRELESS DRIVER, and
put it in alphabetic order while at it.

Fixes: fcda1cb81663 ("MAINTAINERS: add DT bindings files for ath10k and ath11k")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220308085503.537-1-lukas.bulwahn@gmail.com

airo: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220314115354.144023-21-Julia.Lawall@inria.fr

rtlwifi: rtl8821ae: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220314115354.144023-20-Julia.Lawall@inria.fr

rtlwifi: rtl8192cu: Add On Networks N150

This is an RTL8188CUS device, identifies as model N150MA-199WWS.

Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/DBAPR04MB7366E8014ECA839E1F5CCE29920E9@DBAPR04MB7366.eurprd04.prod.outlook.com

zd1201: use kzalloc

Use kzalloc instead of kmalloc + memset.

The semantic patch that makes this change is:
(https://coccinelle.gitlabpages.inria.fr/website/)

//<smpl>
@@
expression res, size, flag;
@@
- res = kmalloc(size, flag);
+ res = kzalloc(size, flag);
  ...
- memset(res, 0, size);
//</smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220312102705.71413-6-Julia.Lawall@inria.fr

mwifiex: make read-only array wmm_oui static const

Don't populate the read-only array wmm_oui on the stack but
instead make it static const. Also makes the object code a little
smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220311225610.10895-1-colin.i.king@gmail.com

mac80211: update bssid_indicator in ieee80211_assign_beacon

Update bssid_indicator in ieee80211_bss_conf according to the
number of bssid in the set.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/f92317e002fca9933f05a445fcefb4f53291d601.1645702516.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: MBSSID channel switch

Trigger ieee80211_csa_finish() on the non-transmitting interfaces
when channel switch concludes on the transmitting interface.

Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/6fde4d7f9fa387494f46a7aa4a584478dcda06f1.1645702516.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: MBSSID beacon handling in AP mode

Add new fields in struct beacon_data to store all MBSSID elements.
Generate a beacon template which includes all MBSSID elements.
Move CSA offset to reflect the MBSSID element length.

Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Money Wang <money.wang@mediatek.com>
Link: https://lore.kernel.org/r/5322db3c303f431adaf191ab31c45e151dde5465.1645702516.git.lorenzo@kernel.org
[small cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: always have ieee80211_sta_restart()

When CONFIG_PM isn't defined we don't have the function
ieee80211_sta_restart() compiled in, but we always need
it now for firmware restart. Move it out of the ifdef.

Fixes: 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart")
Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'linux-can-next-for-5.18-20220313' of git://git./linux/kernel/git/mkl/linux-can-next

linux-can-next-for-5.18-20220313

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-03-13

this is a pull request of 13 patches for net-next/master.

The 1st patch is by me and fixes the freeing of a skb in the vxcan
driver (initially added in this net-next window).

The remaining 12 patches are also by me and target the mcp251xfd
driver. The first patch fixes a printf modifier (initially added in
this net-next window). The remaining patches add ethtool based ring
and RX/TX IRQ coalescing support to the driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

can: mcp251xfd: ring: increase number of RX-FIFOs to 3 and increase max TX-FIFO depth to 16

This patch increases the number of RX-FIFOs to 3 and the max TX-FIFO
depth to 16. This leads to the following default ring configuration.

CAN-2.0 mode:

| FIFO setup: TEF:         0x400:  8*12 bytes =   96 bytes
| FIFO setup: RX-0: FIFO 1/0x460: 32*20 bytes =  640 bytes
| FIFO setup: RX-1: FIFO 2/0x6e0: 32*20 bytes =  640 bytes
| FIFO setup: RX-2: FIFO 3/0x960: 16*20 bytes =  320 bytes
| FIFO setup: TX:   FIFO 4/0xaa0:  8*16 bytes =  128 bytes
| FIFO setup: free:                              224 bytes

CAN-FD mode:

| FIFO setup: TEF:         0x400:  4*12 bytes =   48 bytes
| FIFO setup: RX-0: FIFO 1/0x430: 16*76 bytes = 1216 bytes
| FIFO setup: RX-1: FIFO 2/0x8f0:  4*76 bytes =  304 bytes
| FIFO setup: TX:   FIFO 3/0xa20:  4*72 bytes =  288 bytes
| FIFO setup: free:                              192 bytes

With the previously added ethtool ring configuration support the RAM
on the chip can now be runtime configured between RX and TX buffers.

Link: https://lore.kernel.org/20220313083640.501791-13-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: add TX IRQ coalescing ethtool support

This patch adds support ethtool based configuration for the TX IRQ
coalescing added in the previous patch.

Link: https://lore.kernel.org/20220313083640.501791-12-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: add TX IRQ coalescing support

This patch adds TX IRQ coalescing support to the driver.

The implemented algorithm is similar to the RX IRQ coalescing support
added in the previous patch.

Link: https://lore.kernel.org/20220313083640.501791-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: add RX IRQ coalescing ethtool support

This patch adds support ethtool based configuration for the RX IRQ
coalescing added in the previous patch.

Link: https://lore.kernel.org/20220313083640.501791-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: add RX IRQ coalescing support

This patch adds RX IRQ coalescing support to the driver.

The mcp251xfd chip doesn't support proper hardware based coalescing,
so this patch tries to implemented it in software. The RX-FIFO offers
a "FIFO not empty" interrupt, which is used if no coalescing is
active.

With activated RX IRQ coalescing the "FIFO not empty" interrupt is
disabled in the RX IRQ handler and the "FIFO half full" or "FIFO full
interrupt" (depending on RX max coalesced frames IRQ) is used instead.
To avoid RX CAN frame starvation a hrtimer is setup with RX coalesce
usecs IRQ,on timer expiration the "FIFO not empty" is enabled again.

Support for ethtool configuration is added in the next patch.

Link: https://lore.kernel.org/20220313083640.501791-9-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: ring: add support for runtime configurable RX/TX ring parameters

This patch adds runtime configurable RX and TX ring parameters via
ethtool to the driver.

Link: https://lore.kernel.org/20220313083640.501791-8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: update macros describing ring, FIFO and RAM layout

So far the configuration of the hardware FIFOs is hard coded and
depend only on the selected CAN mode (CAN-2.0 or CAN-FD).

This patch updates the macros describing the ring, FIFO and RAM layout
to prepare for the next patches that add support for runtime
configurable ring parameters via ethtool.

Link: https://lore.kernel.org/20220313083640.501791-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: ring: prepare support for runtime configurable RX/TX ring parameters

This patch prepares the driver for runtime configurable RX and TX ring
parameters. The actual runtime config support will be added in the
next patch.

Link: https://lore.kernel.org/20220313083640.501791-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: ethtool: add support

This patch adds basic ethtool support (to query the current and
maximum ring parameters) to the driver.

Link: https://lore.kernel.org/20220313083640.501791-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: ram: coalescing support

This patch adds support for coalescing to the RAM layout calculation.

Link: https://lore.kernel.org/20220313083640.501791-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: ram: add helper function for runtime ring size calculation

This patch adds a helper function to calculate the ring configuration
of the controller based on various constraints, like available RAM,
size of RX and TX objects, CAN-mode, number of FIFOs and FIFO depth.

Link: https://lore.kernel.org/20220313083640.501791-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: mcp251xfd_ring_init(): use %d to print free RAM

In case of an erroneous ring configuration more RAM than available
might be used. Change the printf modifier to a signed int to properly
print this erroneous value.

Fixes: 83daa863f16b ("can: mcp251xfd: ring: update FIFO setup debug info")
Link: https://lore.kernel.org/20220313083640.501791-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: vxcan: vxcan_xmit(): use kfree_skb() instead of kfree() to free skb

This patch fixes the freeing of the "oskb", by using kfree_skb()
instead of kfree().

Fixes: 1574481bb3de ("vxcan: remove sk reference in peer skb")
Link: https://lore.kernel.org/all/20220311123741.382618-1-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
ice: GTP support in switchdev

Marcin Szycik says:

Add support for adding GTP-C and GTP-U filters in switchdev mode.

To create a filter for GTP, create a GTP-type netdev with ip tool, enable
hardware offload, add qdisc and add a filter in tc:

ip link add $GTP0 type gtp role <sgsn/ggsn> hsize <hsize>
ethtool -K $PF0 hw-tc-offload on
tc qdisc add dev $GTP0 ingress
tc filter add dev $GTP0 ingress prio 1 flower enc_key_id 1337 \
action mirred egress redirect dev $VF1_PR

By default, a filter for GTP-U will be added. To add a filter for GTP-C,
specify enc_dst_port = 2123, e.g.:

tc filter add dev $GTP0 ingress prio 1 flower enc_key_id 1337 \
enc_dst_port 2123 action mirred egress redirect dev $VF1_PR

Note: outer IPv6 offload is not supported yet.
Note: GTP-U with no payload offload is not supported yet.

ICE COMMS package is required to create a filter as it contains GTP
profiles.

Changes in iproute2 [1] are required to be able to add GTP netdev and use
GTP-specific options (QFI and PDU type).

[1] https://lore.kernel.org/netdev/20220211182902.11542-1-wojciech.drewek@intel.com/T
---
v2: Add more CC
v3: Fix mail thread, sorry for spam
v4: Add GTP echo response in gtp module
v5: Change patch order
v6: Add GTP echo request in gtp module
v7: Fix kernel-docs in ice
v8: Remove handling of GTP Echo Response
v9: Add sending of multicast message on GTP Echo Response, fix GTP-C dummy
    packet selection
v10: Rebase, fixed most 80 char line limits
v11: Rebase, collect Harald's Reviewed-by on patch 3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: suspend embedded PHY if external is used

In case external PHY is used, we need to take care of embedded PHY.
Since there are no methods to disable this PHY from the MAC side and
keeping RMII reference clock, we need to suspend it.

This patch will reduce electrical noise (PHY is continuing to send FLPs)
and power consumption by 0,22W.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: make use of mdiobus_get_phy and phy_connect_direct

In most cases we use own mdio bus, there is no need to create and store
string for the PHY address.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: store chipid to avoid reading it on reset

We already read chipid on probe. There is no need to read it on reset.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: unify ax88772_resume code

The only difference is the reset code, so remove not needed duplicates.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: add per-cpu storage and net->core_stats

Before adding yet another possibly contended atomic_long_t,
it is time to add per-cpu storage for existing ones:
 dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler

Because many devices do not have to increment such counters,
allocate the per-cpu storage on demand, so that dev_get_stats()
does not have to spend considerable time folding zero counters.

Note that some drivers have abused these counters which
were supposed to be only used by core networking stack.

v4: should use per_cpu_ptr() in dev_get_stats() (Jakub)
v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo)
v2: add a missing include (reported by kernel test robot <lkp@intel.com>)
    Change in netdev_core_stats_alloc() (Jakub)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: jeffreyji <jeffreyji@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'nfp-preliminary-support-for-nfp-3800'

Simon Horman says:

====================
nfp: preliminary support for NFP-3800

This series is the first step to add support to the NFP driver for the
new NFP-3800 device. In this first series the goal is to clean
up small issues found while adding support for the new device, prepare
an abstraction of the differences between the already supported devices
and the new Kestrel device and add the new PCI ID.

* Patch 1/11 and 2/11 starts by removing some dead code and incorrect
  assumptions found while working Kestrel support. Patch 3/11, 4/11 and
  5/11 cleans up and prepares for adding the new PCI ID for Kestrel.
* Patches 6/11, 7/11, 8/11, 9/11, 10/11 adds, plumb and populates a device
   information structure to abstract the differences between the existed
   supported devices (NFP-4000, NFP-5000 and NFP-6000) and the
   new device (NFP3800).
* Finally patch 11/11 adds the new PCI ID for Kestrel.

More work is needed to drive the new NFP-3800 device after this first
batch of patches the foundation is prepared for the follow up work.

Thanks to the work of all those who contributed to this work.
====================

Link: https://lore.kernel.org/r/20220311104306.28357-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: add support for NFP3800/NFP3803 PCIe devices

Enable binding the nfp driver to NFP3800 and NFP3803 devices.
The PCIE_SRAM offset is different for the NFP3800 device, which also
only supports a single explicit group.

Changes to Dirk's work:
* 48-bit dma addressing is not ready yet. Keep 40-bit dma addressing
for NFP3800.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: take chip version into account for ring sizes

NFP3800 has slightly different queue controller range bounds.
Use the static chip data instead of defines.  This commit
still assumes unchanged descriptor format.  Later datapath
changes will allow adjusting for descriptor accounting.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: parametrize QCP offset/size using dev_info

The queue controller (QCP) is accessed based on a device specific
offset. The NFP3800 device also supports more queues.

Furthermore, the NFP3800 VFs also access the QCP differently to how the
NFP6000 VFs accesses it, though still indirectly. Fortunately, we can
remove the offset all together for both VF types. This is safe for
NFP6000 VFs since the offset was effectively a wrap around and only used
for convenience to have it set the same as the NFP6000 PF.

Use nfp_dev_info to store queue controller parameters.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: use dev_info for the DMA mask

In preparation for new chips instead of defines use dev_info constants
to store DMA mask length.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: use dev_info for PCIe config space BAR offsets

NFP3800 uses a different PCIe configuration to CPP expansion BAR offsets.
We don't need to differentiate between the NFP4000, NFP5000 and NFP6000
since they all use the same offsets.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: introduce dev_info static chip data

In preparation for supporting new chip add a driver data structure
which will hold per-chip-version information such as register
offsets.

Plumb it through to the relevant functions (nfpcore and nfp_net).
For now only a very simple member holding chip names is added,
following commits will add more.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: sort the device ID tables

Make sure the device ID tables are in ascending order.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: use PluDevice register for model for non-NFP6000 chips

The model number for NFP3800 and newer devices can be completely
derived from PluDevice register without subtracting 0x10.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: use PCI_DEVICE_ID_NETRONOME_NFP6000_VF for VFs instead

The PCI_DEVICE_ID_NETRONOME_NFP6000_VF is available for use and
should be used instead of the PCI_DEVICE_NFP6000VF. Meanwhile,
PCI_DEVICE_NFP6000VF PCI ID is removed for not being used.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: remove pessimistic NFP_QCP_MAX_ADD limits

Multiple writes cause intermediate pointer values that do not
end on complete TX descriptors.

The QCP peripheral on the NFP provides a number of access
modes.  In some access modes, the maximum amount to add must
be restricted to a 6bit value.  The particular access mode
used by _nfp_qcp_ptr_add() has no such restrictions, so the
"< NFP_QCP_MAX_ADD" test is unnecessary.

Note that trying to add more that the configured ring size
in a single add will cause a QCP overflow, caught and handled
by the QCP peripheral.

Signed-off-by: Christo du Toit <christo.du.toit@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: remove define for an unused control bit

NFP driver ABI contains a bit for ring prioritization which
was never implemented in the initially envisioned form.

Remove it, and open up the possibility of reclaiming for other uses.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethernet: 8390: Remove unnecessary print function dev_err()

The print function dev_err() is redundant because platform_get_irq()
already prints an error.

Eliminate the follow coccicheck warning:
./drivers/net/ethernet/8390/mcf8390.c:414:2-9: line 414 is redundant
because platform_get_irq() already prints an error

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220311001756.12234-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: remove exports for netdev_name_node_alt_create() and destroy

netdev_name_node_alt_create() and netdev_name_node_alt_destroy()
are only called by rtnetlink, so no need for exports.

Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220310223952.558779-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>