Arnd Bergmann [Thu, 21 Dec 2023 16:43:31 +0000 (16:43 +0000)]
Merge tag 'imx-dt64-6.8' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.8:
- New board support: MBa93xxCA starter kit, LX2160A based MBLX2160A,
Dimonoff Gateway EVK, Verdin i.MX8M based Mallow, and SKOV i.MX8MP revB.
- A set of changes from Adam Ford to enable MIPI_DSI, overdrive mode and
NPU support for Beacon i.MX8M boards.
- A number of changes from Alexander Stein to add CCM interrupts for
CCM, 'chassis-type' property, and enable VPU and LVDS display for
TQ-Systems boards.
- i.MX93 update for AUDIO, I3C, ANATOP and uSDHC.
- A couple of changes from David Heidelberg to correct dt-schema check
errors for 'fsl,tmu-calibration' and 'gpio-fan,speed-map'.
- A bunch of nice dt-schema check fix-ups from Fabio Estevam.
- A couple of debix-som update from Kieran Bingham adding heartbeat LED
and CSI power regulators.
- White-space cleanup from Krzysztof Kozlowski.
- Add display support for imx8mn-bsh-smm-s2/pro board.
- A series from Tim Harvey to add TPM support for i.MX8M Venice devices.
* tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits)
arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration
arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default
arm64: dts: imx8qxp: Add VPU subsystem file
arm64: dts: imx8qxp-mek: Move port under USB connector
arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup
arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector
arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description
arm64: dts: imx8mp-venice: Fix USB connector description
arm64: dts: imx8mp-verdin: Fix USB connector description
arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node
arm64: dts: imx8mn-evk: Move port under USB connector
arm64: dts: imx8mm-evk: Move port under USB connector
arm64: dts: freescale: introduce dimonoff-gateway-evk board
arm64: dts: imx8m*-tqma8m*: Add chassis-type
arm64: dts: imx8mn-beacon: Support overdrive mode
arm64: dts: imx8mn: Enable Overdrive mode
arm64: dts: imx8mm-beacon: Enable overdrive mode
arm64: dts: imx8mm: Add optional overdrive DTSI
arm64: dts: imx8mm: Reduce GPU to nominal speed
...
Link: https://lore.kernel.org/r/20231216064605.876196-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 16:37:27 +0000 (16:37 +0000)]
Merge tag 'imx-dt-6.8' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.8:
- A bunch of changes from Fabio Estevam cleaning up dt-schema warnings.
- A number of i.MX7 related small fixes and peripheral addition from
Alexander Stein.
- A set of changes from Hiago De Franco adding usdhc aliases for Apalis
and Colibri boards.
- A white-space cleanup from Krzysztof Kozlowski.
- A change from Linus Walleij to correct errors in the Marvell MV88E6xxx
switch descriptions.
- Fix a couple of typo in comment for MBA6 and MBA6ULX board.
- Add on-chip memory and enable MIPI-DSI support for i.MX7.
- Add LM75A sensor for TQMA7 board.
* tag 'imx-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name
ARM: dts: imx25: Remove unneeded keypad properties
ARM: dts: imx23/28: Fix the DMA controller node name
ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
ARM: dts: imx27-apf27dev: Fix LED name
ARM: dts: imx25/27: Pass timing0
ARM: dts: imx25: Fix the iim compatible string
ARM: dts: imx25: Move usbphy nodes out of simple-bus
ARM: dts: imx1: Use 'bus' for AIPI bus
ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus
ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus
ARM: dts: imx27: Use 'bus' for EMI bus
ARM: dts: imx27: Use 'bus' for AIPI bus
ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
ARM: dts: imx1: Fix sram node
ARM: dts: imx27: Fix sram node
ARM: dts: imx: Use flash@0,0 pattern
ARM: dts: imx25/27-eukrea: Fix RTC node name
ARM: dts: imx25-pdk: Pass #sound-dai-cells
ARM: dts: imx25: Pass I2C clock-names property
...
Link: https://lore.kernel.org/r/20231216064605.876196-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 16:35:59 +0000 (16:35 +0000)]
Merge tag 'imx-bindgins-6.8' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX DT bindings for 6.8:
- New vendor prefix for Dimonoff and echarge Véhicule Électrique (RVE).
- New board compatible for TQ-Systems LX2160A, RVE gateway, Dimonoff
gateway EVK, i.MX8M Mallow and SKOV i.MX8MP RevB board.
* tag 'imx-bindgins-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: add Dimonoff gateway EVK board
dt-bindings: vendor-prefixes: add dimonoff
dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
dt-bindings: arm: fsl: add verdin imx8mp mallow board
dt-bindings: arm: fsl: add verdin imx8mm mallow board
dt-bindings: arm: Add compatible for SKOV i.MX8MP RevB board
dt-bindings: arm: fsl: add RVE gateway board
dt-bindings: vendor-prefixes: add rve
Link: https://lore.kernel.org/r/20231216064605.876196-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 16:33:56 +0000 (16:33 +0000)]
Merge tag 'ux500-dts-soc-for-v6.8' of git://git./linux/kernel/git/linusw/linux-integrator into soc/dt
More Ux500 device tree updates for v6.8
The HREF520 reference design had the wrong analog baseband
defined causing a boot regression.
Was AB8500, but this board has AB8505.
Rearrange the device trees to make it possible to define
a different AB and slot it in.
* tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: ux500-href: Switch HREF520 to AB8505
ARM: dts: ux500-href: Push AB8500 config out
ARM: dts: ux500-href: Push AB8500 inclusion to the top
Link: https://lore.kernel.org/r/CACRpkdZ9wCV7oohF2KX6MFwmuSPR_i7et8O5SH=op6gyQ4mOvQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 16:25:46 +0000 (16:25 +0000)]
Merge tag 'renesas-dts-for-v6.8-tag2' of git://git./linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.8 (take two)
- Add IA55 interrupt controller and Ethernet support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control
arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces
arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities
arm64: dts: renesas: r9a08g045: Add Ethernet nodes
arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node
Link: https://lore.kernel.org/r/cover.1702642342.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 16:17:22 +0000 (16:17 +0000)]
Merge tag 'stm32-dt-for-v6.8-1' of git://git./linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.8, round 1
Highlights:
----------
- MCU:
- Add SPI support on STM32F746.
- Better describe vcc_3v3 for SD and DSI on stm32f469-disco.
- MPU:
- STM32MP13:
- Add DCMIPP (Digital Camera Memory Interface Piwel Processor) on STM32MP135.
- STMP32MP15:
- Change "phys" affectation from board to Soc dtsi file for USB host as it is hard linked
to the port 0 of usbphyc.
- Fix SCMI and No-SCMI compatible in boards.
- STM32MP25:
- Add BSEC support to read the device part number OTP and the package data register OTP.
* tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add dcmipp support to stm32mp135
arm64: dts: st: add bsec support to stm32mp25
ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
ARM: dts: stm32: minor whitespace cleanup around '='
ARM: dts: stm32: add SPI support on STM32F746
ARM: dts: stm32: add STM32F746 syscfg clock
ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco
Link: https://lore.kernel.org/r/9363227b-1c44-4a20-b245-efbbbf9ab1dd@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:59:19 +0000 (15:59 +0000)]
Merge tag 'sunxi-dt-for-6.8-1' of https://git./linux/kernel/git/sunxi/linux into soc/dt
- new boards: Orange Pi Zero 2W, Transpeed 8K618-T
* tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box
dt-bindings: arm: sunxi: document Transpeed 8K618-T board name
dt-bindings: vendor-prefixes: add Transpeed
arm64: dts: allwinner: h616: add Orange Pi Zero 2W support
dt-bindings: arm: sunxi: add Orange Pi Zero 2W
Link: https://lore.kernel.org/r/ZXtWFk-Bne835txP@archlinux
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:57:59 +0000 (15:57 +0000)]
Merge tag 'at91-dt-6.8' of https://git./linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.8
It contains:
- IRQ support for Ethernet PHYs on SAM9X60-EK and SAM9X60-Curiosity
boards
- removal of the mmc-ddr-3_3v property from SD controllers connected to SD
slots, for SAMA5D27-WLSOM1-EK and SAMA5D27-SOM1-EK boards, as this
property is for eMMC devices
* tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY
ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY
Link: https://lore.kernel.org/r/20231214174954.3045355-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:57:22 +0000 (15:57 +0000)]
Merge tag 'juno-update-6.8' of git://git./linux/kernel/git/sudeep.holla/linux into soc/dt
Arm Vexpress/Juno update for v6.8
Just a single update to align the thermal zone names with bindings matching
[alphanumericals]*-thermal pattern.
* tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Align thermal zone names with bindings
Link: https://lore.kernel.org/r/20231213115826.3577764-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:56:00 +0000 (15:56 +0000)]
Merge tag 'v6.8-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are the Geniatech XPI-3128 (RK3128), Sonoff iHost (rv1109)
One "new" soc is the rv1109 which is a two-core variant of the rv1126
and everything else is identical.
Lots of love for the old rk3128 (power-domains, gpu, gmac, usb) and
rv1126 (uart pins, i2c2 special case) and rework of aliases to have
core busses that are hard-numbered in boards and documentation centrally
in the dtsi, but the per board aliases in the boards (ethernet).
Plus the rk3036 got a yaml hdmi binding which required some small fixes.
* tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin
ARM: dts: rockchip: fix rk3036 hdmi ports node
ARM: dts: rockchip: add gpio alias for gpio dt nodes
ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub
dt-bindings: arm: rockchip: Add Sonoff iHost
ARM: dts: rockchip: Add rv1109 SoC
ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126
ARM: dts: rockchip: Add i2c2 node to rv1126
ARM: dts: rockchip: Serial aliases for rv1126
ARM: dts: rockchip: Add alternate UART pins to rv1126
ARM: dts: rockchip: Enable GPU for XPI-3128
ARM: dts: rockchip: Add GPU node for RK3128
ARM: dts: rockchip: Add power-controller for RK3128
ARM: dts: rockchip: Enable gmac for XPI-3128
ARM: dts: rockchip: Add gmac node for RK3128
ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128
ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128
...
Link: https://lore.kernel.org/r/3197878.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:46:17 +0000 (15:46 +0000)]
Merge tag 'v6.8-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are the Anberic RG351V handheld (rk3326), Theobroma Systems Jaguar
SBC (rk3588), Powkiddy X55 and RK2023 handheld (rk3566), Edgeble-Neu6b (rk3588)
The rk3588 got attention with one working usb3 host on Rock-5a/5b, Orangepi-5
and audio for the EVB1.
Some smaller improvements for the other socs (fifo-depths on rk3328,
gpio-line-names on rk3308-rock-pi-s, gpu power-coefficients on rk3399,
and a fix for the newly converted gpio-fan yaml binding).
Also a number of aliases were moved. Always-numbered core busses can have their
aliases in the soc dtsi, as is done in a number of cases already and other alises
like ethernet really should be per board.
* tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Split RG351M from Odroid Go Advance
dt-bindings: arm: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
arm64: dts: rockchip: add gpio alias for gpio dt nodes
arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
arm64: dts: rockchip: add Theobroma Jaguar SBC
dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
arm64: dts: rockchip: Add Powkiddy X55
dt-bindings: arm: rockchip: Add Powkiddy X55
...
Link: https://lore.kernel.org/r/3535836.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:44:11 +0000 (15:44 +0000)]
Merge tag 'mtk-dts64-for-v6.8' of https://git./linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.8
This adds devicetree bindings and nodes for:
- Media Data Path 3 (MDP3) bindings and enablement on MT8195
- Smart Voltage Scaling (SVS) on MT8195
- LVTS SoC thermal on MT8192
- MT8188 SoC along with its resets, display bindings, and more
- MT8183 hardware video decoder (mtk-vcodec-dec)
Adds the following new machines:
- MT8188 Evaluation Board (EVB)
- MT8183 Chromebooks: Kukui-Katsu, Jacuzzi-Makomo, Pico, Pico6
Performs cleanups for various MediaTek SoCs and PMICs, and also
includes some spare fixes.
* tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (60 commits)
arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node
arm64: dts: mediatek: mt8195: Add SVS node and reduce LVTS_AP iospace
arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs
arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes
arm64: dts: mediatek: mt8186: Fix alias prefix for ovl_2l0
arm64: dts: mt6358: Drop bogus "regulator-fixed" compatible properties
arm64: dts: mt8183: kukui-jacuzzi: Drop bogus anx7625 panel_flag property
arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile
dt-bindings: soc: mediatek: pwrap: Modify compatible for MT8188
dt-bindings: arm: mediatek: Add mt8188 pericfg compatible
dt-bindings: arm: Add compatible for MediaTek MT8188
arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes
dt-bindings: display: mediatek: dsi: add compatible for MediaTek MT8195
arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators
dt-bindings: arm: mediatek: convert audsys and mt2701-afe-pcm to yaml
arm64: dts: mediatek: mt8195: add MDP3 nodes
arm64: dts: mediatek: mt8195: revise VDOSYS RDMA node name
arm64: dts: mediatek: mt8183: correct MDP3 DMA-related nodes
dt-bindings: display: mediatek: padding: add compatible for MT8195
dt-bindings: display: mediatek: split: add compatible for MT8195
...
Link: https://lore.kernel.org/r/20231212114515.121695-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:42:39 +0000 (15:42 +0000)]
Merge tag 'samsung-dt-6.8' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.8
1. Exynos4212 and Exynos4412: Final fixes for dtbs_check warnings.
Replace duplicate PMU node in FIMC IS node with syscon phandle. The
old solution of duplicated PMU node was not a correct representation of
the hardware and could have concurrent access issues.
The DTS change depends on media FIMC IS drivers changes already
merged in previous cycle, thus it is not fully
backwards-compatible. It is a necessary trade-off in fixing wrong
description in DTS.
With this fix, `make dtbs_check` status looks like:
S3C6410: no warnings
Exynos: no warnings, one undocumented compatible
S5PV210: one warning, one undocumented compatible
2. Exynos4210, Exynos4212, Exynos4412, S5PV210:
Correct FIMC IS camera ranges and IO addresses to silence dtc W=1
warnings. No functional impact expected.
After this fix, there are no dtc W=1 warnings on all ARMv7 platforms.
3. Galaxy I9100: Fix 12-second hang during boot by enabling regulator
(real cause not really known), add touch keys and accelerometer.
* tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4210-i9100: Add accelerometer node
ARM: dts: samsung: exynos4210-i9100: Add node for touch keys
ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12
ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges
ARM: dts: samsung: exynos4: fix camera unit addresses/ranges
ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandle
Link: https://lore.kernel.org/r/20231212093105.13938-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:41:22 +0000 (15:41 +0000)]
Merge tag 'samsung-dt64-6.8' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.8
Two (and a half) major items are coming with this pull request:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
because that's what guidelines expect [1] and is generally
recommended practice. Existing compatibles are left untouched, thus
no driver changes are needed. The work only cleans things up, so any
future contributions will use recommended style: specific and
fallback compatibles.
Since no driver changes are needed in this work and the DTS is
directly affected by bindings change (running tests with `make
dtbs_check`), this pull includes all bindings changes, even though
usual practice is that bindings come via driver subsystem. Keeping
everything here makes review and testing easier. Also will allow us
to avoid conflicts related to new platforms (see below).
2. Add ExynosAutov920 SoC and SADK board (Samsung Automotive Development
Kit) with minimal support so far: serial console, GPIO-based keys and
PWM fan.
3. Add few bindings for upcoming Google GS101 SoC. This pull request
does not include its DTS yet, just few reviewed dependencies. DTS
will be coming soon.
[1] Documentation/devicetree/bindings/writing-bindings.rst
* tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (38 commits)
arm64: dts: exynos: add minimal support for exynosautov920 sadk board
arm64: dts: exynos: add initial support for exynosautov920 SoC
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
arm64: dts: fsd: add specific compatibles for Tesla FSD
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
dt-bindings: pwm: samsung: add exynosautov920 compatible
dt-bindings: serial: samsung: add exynosautov920-uart compatible
dt-bindings: samsung: usi: add exynosautov920-usi compatible
dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
...
Link: https://lore.kernel.org/r/20231212093105.13938-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Mon, 11 Dec 2023 23:39:25 +0000 (00:39 +0100)]
ARM: dts: ste: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231212-ux500-dts-v1-1-5a31b6742d85@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:38:28 +0000 (15:38 +0000)]
Merge tag 'omap-for-v6.8/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps
- A series of patches to reorganize Motorola Mapphone related files to add
support for tablets as the peripherals are different compared to the
phones
- Apply am57xx-idk overlays to base dtbs
- Extcon update to use id-gpios and vbus-gpios
- Update omap4-epson-embt2ws to enable wlan clock and bluetooth-gnss
- Update for logicpd-torpedo to use bluetooth-gnss node name
* tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-embt2ws: Add Bluetooth
ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device
ARM: dts: omap4-embt2ws: enable 32K clock on WLAN
ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm: dts: omap: Apply am57xx-idk overlays to base dtbs
ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617
ARM: dts: motorola-mapphone: Move handset devices to a common file
ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894
dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets
Link: https://lore.kernel.org/r/pull-1702037869-295608@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2023 15:37:23 +0000 (15:37 +0000)]
Merge tag 'hisi-arm64-dt-for-6.8' of https://github.com/hisilicon/linux-hisi into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v6.8
- Merge the hi3620-clock binding into hisilicon,sysctrl
- Clean up the hikey970 PMIC dtsi
* tag 'hisi-arm64-dt-for-6.8' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hikey970-pmic: clean up SPMI node
arm64: dts: hisilicon: hikey970-pmic: fix regulator cells properties
dt-bindings: hisilicon: Merge hi3620-clock into hisilicon,sysctrl binding
Link: https://lore.kernel.org/r/6572C4C8.6050401@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
David Heidelberg [Fri, 15 Dec 2023 23:07:35 +0000 (00:07 +0100)]
arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration
fsl,tmu-calibration contains cell pairs (u32-matrix). Mark them as such.
Use matching property syntax and allow correct validation.
No functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Fri, 15 Dec 2023 12:18:45 +0000 (09:18 -0300)]
ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name
Node names should be generic.
Use 'rtc' for the rtc node to fix the following dt-schema warning:
imx27-phytec-phycore-rdk.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Fri, 15 Dec 2023 12:14:33 +0000 (09:14 -0300)]
ARM: dts: imx25: Remove unneeded keypad properties
Per imx-keypad.yaml, '#address-cells', '#size-cells', 'clock-names'
are not valid properties.
Remove them to fix the following dt-schema warning:
imx25-pdk.dtb: kpp@
43fa8000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'clock-names' were unexpected)
from schema $id: http://devicetree.org/schemas/input/imx-keypad.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Thu, 14 Dec 2023 13:42:59 +0000 (14:42 +0100)]
arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default
Even if the 'dsp' node is disabled the memory intended to be used by the
DSP is reserved. This limits the memory range suitable for CMA allocation.
Thus disable the dsp_reserved node. DSP users need to enable it in parallel
to the 'dsp' node.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Thu, 14 Dec 2023 13:20:00 +0000 (14:20 +0100)]
arm64: dts: imx8qxp: Add VPU subsystem file
imx8qxp re-uses imx8qm VPU subsystem file, but it has different base
addresses. Also imx8qxp has only two VPU cores, delete vpu_vore2 and
mu2_m0 accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 14 Dec 2023 09:16:53 +0000 (06:16 -0300)]
arm64: dts: imx8qxp-mek: Move port under USB connector
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.
Do as requested to fix the following dt-schema warning:
imx8qxp-mek.dtb: tcpc@50: connector:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
imx8qxp-mek.dtb: tcpc@50: connector: Unevaluated properties are not allowed ('ports' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Michael Trimarchi [Thu, 14 Dec 2023 08:24:06 +0000 (09:24 +0100)]
arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup
Add the display and nodes required for its operation.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linus Walleij [Thu, 14 Dec 2023 22:29:14 +0000 (23:29 +0100)]
ARM: dts: ux500-href: Switch HREF520 to AB8505
After noticing a tendency to misbehave and randomly power down:
switch the HREF520 AB8500 to the AB8505, which is what it has
mounted. After this the board works better.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-3-9dcff0783d62@linaro.org
Linus Walleij [Thu, 14 Dec 2023 22:29:13 +0000 (23:29 +0100)]
ARM: dts: ux500-href: Push AB8500 config out
Push out some AB8500 setup of regulators and phy out to the
per-AB850x variant file ste-href-ab8500.dtsi so it becomes
self-contained for each AB850x chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-2-9dcff0783d62@linaro.org
Linus Walleij [Thu, 14 Dec 2023 22:29:12 +0000 (23:29 +0100)]
ARM: dts: ux500-href: Push AB8500 inclusion to the top
On the hardware reference designs, include the AB8500 definitions
on the top level in the DTS files, this is to make it possible to
use the AB8505 in the HREF520.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-1-9dcff0783d62@linaro.org
Hugues Fruchet [Mon, 27 Nov 2023 17:08:18 +0000 (18:08 +0100)]
ARM: dts: stm32: add dcmipp support to stm32mp135
Add dcmipp support to STM32MP135.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Andre Przywara [Thu, 14 Dec 2023 01:53:12 +0000 (01:53 +0000)]
arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box
This is a Chinese TV box, probably very similar if not identical to
various other cheap TV boxes with the same specs:
- Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache)
- 2 or 4GiB DDR3L DRAM
- 32, 64, or 128 GiB eMMC flash
- AXP313a PMIC
- 100 Mbit/s Ethernet (using yet unsupported internal PHY)
- HDMI port
- 2 * USB 2.0 ports
- microSD card slot
- 3.5mm A/V port
- 7-segment display
- 5V barrel plug power supply
The PCB provides holes for soldering a UART header or cable, this is
connected to the debug UART0. UART1 is used for the Bluetooth chip,
although this isn't working yet.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231214015312.17363-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Thu, 14 Dec 2023 01:53:11 +0000 (01:53 +0000)]
dt-bindings: arm: sunxi: document Transpeed 8K618-T board name
The Transpeed 8K618-T TV box is a Chinese Android TV box, using the
Allwinner H618 SoC.
Add the board/SoC compatible string pair to the list of known boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214015312.17363-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Thu, 14 Dec 2023 01:53:10 +0000 (01:53 +0000)]
dt-bindings: vendor-prefixes: add Transpeed
This is a name used by some Chinese TV boxes, add it to the bindings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214015312.17363-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Patrick Delaunay [Fri, 17 Nov 2023 14:33:37 +0000 (15:33 +0100)]
arm64: dts: st: add bsec support to stm32mp25
Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Uwe Kleine-König [Wed, 6 Dec 2023 08:31:43 +0000 (09:31 +0100)]
ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
All machines making use of &usbh_ehci and/or &usbh_ohci use
phys = <&usbphyc_port0>;
So move this setting into the .dtsi. Also add
phy-names = "usb";
which isn't used by all machines, but nice for consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Ahmad Fatoum [Wed, 22 Nov 2023 18:52:34 +0000 (19:52 +0100)]
ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
The binding erroneously decreed that the SCMI variants of the ST
evaluation kits are compatible with the non-SCMI variants.
This is not correct, as a kernel or bootloader compatible with the non-SCMI
variant is not necessarily able to function, when direct access
to resources is replaced by having to talk SCMI to the secure monitor.
The binding has been adjusted to reflect thus, so synchronize the device
trees now.
Fixes: 5b7e58313a77 ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Ahmad Fatoum [Wed, 22 Nov 2023 18:52:33 +0000 (19:52 +0100)]
dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
SCMI-enabled boards may restrict access to resources like clocks, resets
and regulators to the secure world.
A normal world bootloader or kernel compatible with the non-SCMI-enabled
board is thus not guaranteed to be able to deal with the SCMI variant.
It follows, that the SCMI-enabled board is not compatible with the
non-SCMI enabled board, so drop that compatible.
This change is motivated by the barebox' bootloader's use of bootloader
specification files[1][2]: barebox for non-SCMI DK2 will compare its
own top-level "stm32mp157c-dk2" compatible with all compatibles
listed in the device tree referenced by each bootloader spec file.
If the boot medium contains a configuration with
compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
it will match, because of the second compatible and boot a kernel with
SCMI enabled, although no SCMI may exist on the platform.
[1]: https://uapi-group.org/specifications/specs/boot_loader_specification/
[2]: https://www.barebox.org/doc/latest/user/booting-linux.html#boot-loader-specification
Fixes: 8e14ebb1f08f ("dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Krzysztof Kozlowski [Mon, 27 Nov 2023 09:34:20 +0000 (10:34 +0100)]
ARM: dts: stm32: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fabio Estevam [Tue, 12 Dec 2023 17:48:47 +0000 (14:48 -0300)]
arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector
Describe the PTN5150 USB-C connector to improve the devicetree description
and fix the following dt-schema warning:
imx8mp-dhcom-pdk3.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Tue, 12 Dec 2023 17:48:46 +0000 (14:48 -0300)]
arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
Describe the PTN5150 USB-C connector to improve the devicetree description
and fix the following dt-schema warning:
imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 13 Dec 2023 21:18:47 +0000 (18:18 -0300)]
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description
The USB connector should not be placed under the dwc3 node.
Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.
This fixes the following dt-schema warning:
imx8mp-tqma8mpql-mba8mpxl.dtb: usb@
38100000: Unevaluated properties are not allowed ('connector' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 13 Dec 2023 21:18:46 +0000 (18:18 -0300)]
arm64: dts: imx8mp-venice: Fix USB connector description
The USB connector should not be placed under the dwc3 node.
Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.
This fixes the following dt-schema warning:
imx8mp-venice-gw72xx-2x.dtb: usb@
38100000: Unevaluated properties are not allowed ('connector' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 13 Dec 2023 21:18:45 +0000 (18:18 -0300)]
arm64: dts: imx8mp-verdin: Fix USB connector description
The USB connector should not be placed under the dwc3 node.
Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.
This fixes the following dt-schema warning:
imx8mp-verdin-wifi-mallow.dtb: usb@
32f10100: usb@
38100000: Unevaluated properties are not allowed ('connector' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Mon, 11 Dec 2023 17:24:35 +0000 (14:24 -0300)]
arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node
The clk_dummy is not part of the usbotg2 block, so move it
to the root node to fix the following dt-schema warning:
imx8dxl-evk.dtb: usb@
5b0e0000: Unevaluated properties are not allowed ('clock-dummy' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 7 Dec 2023 15:58:42 +0000 (12:58 -0300)]
arm64: dts: imx8mn-evk: Move port under USB connector
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.
Do as requested to fix the following dt-schema warning:
imx8mn-evk.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 7 Dec 2023 15:58:41 +0000 (12:58 -0300)]
arm64: dts: imx8mm-evk: Move port under USB connector
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.
Do as requested to fix the following dt-schema warning:
imx8mm-evkb.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hugo Villeneuve [Thu, 7 Dec 2023 15:05:19 +0000 (10:05 -0500)]
arm64: dts: freescale: introduce dimonoff-gateway-evk board
The Dimonoff gateway EVK board is based on a Variscite
VAR-SOM-NANO, with a NXP MX8MN nano CPU and also based on a Symphony
mx8mn EVK.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hugo Villeneuve [Thu, 7 Dec 2023 15:05:18 +0000 (10:05 -0500)]
dt-bindings: arm: fsl: add Dimonoff gateway EVK board
Add DT compatible string for Dimonoff gateway EVK board based on a
Variscite VAR-SOM-NANO with a NXP MX8MN nano CPU.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hugo Villeneuve [Thu, 7 Dec 2023 15:05:17 +0000 (10:05 -0500)]
dt-bindings: vendor-prefixes: add dimonoff
Add vendor prefix for Dimonoff, which provides
IoT smart solutions and custom engineering services.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Thu, 7 Dec 2023 14:54:01 +0000 (15:54 +0100)]
arm64: dts: imx8m*-tqma8m*: Add chassis-type
Device tree specification 0.4 defines an optional, but recommended
'chassis-type' property. Add it to TQMa8M* based board files.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Tue, 28 Nov 2023 21:18:32 +0000 (15:18 -0600)]
arm64: dts: imx8mn-beacon: Support overdrive mode
The SoC is configured to operate in overdrive mode, so it
is safe to include imx8mn-overdrive to run the GPU faster.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Tue, 28 Nov 2023 21:18:31 +0000 (15:18 -0600)]
arm64: dts: imx8mn: Enable Overdrive mode
The i.MX8M Nano supports and overdrive mode if the SoC is given
the proper voltage. Add imx8mn-overdrive.dtsi file which can
be included by boards who support the voltage necessary to handle
the faster clocks. This increases the GPU clocks from 400MHz to
600MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Tue, 28 Nov 2023 20:02:18 +0000 (14:02 -0600)]
arm64: dts: imx8mm-beacon: Enable overdrive mode
The SoC runs at a high enough voltage to support overdrive
mode, so include the imx8mm-overdrive.dtsi file to increase
the VPU and GPU clocks to their overdrive speeds.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Tue, 28 Nov 2023 20:02:17 +0000 (14:02 -0600)]
arm64: dts: imx8mm: Add optional overdrive DTSI
For boards who run their SoC at a higher voltage than nominal,
the boards can run several clocks at an overdrive rate for
better performance. Add an optional DTSI file which can be
included by various boards to run in overdrive mode.
This raises the GPU PLL to 1000MHz, and the VPU PLL to
700MHz while moving VPU_G1 and VPU_H1 to the SYS_PLL3_OUT
which runs at 750MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Tue, 28 Nov 2023 20:02:16 +0000 (14:02 -0600)]
arm64: dts: imx8mm: Reduce GPU to nominal speed
When the GPU nodes were added, the GPU_PLL_OUT was configured
for 1000MHz, but this requires the SoC to run in overdrive mode
which requires an elevated voltage operating point.
Since this may run some boards out of spec, the default clock
should be set to 800MHz for nominal operating mode. Boards
that run at the higher voltage can update their clocks
accordingly.
Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 7 Dec 2023 12:20:56 +0000 (09:20 -0300)]
arm64: dts: imx93: Fix the micfil clock-names entries
fsl,micfil.yaml defines the clock-names in the following sequence:
clock-names:
items:
- const: ipg_clk
- const: ipg_clk_app
- const: pll8k
- const: pll11k
- const: clkext3
minItems: 2
imx93.dtsi currently misses the 'pll11k' entry and jump to 'clkext3'.
This leads to the following dt-schema warning:
imx93-11x11-evk.dtb: micfil@
44520000: clock-names:3: 'pll11k' was expected
from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
Fix the warning by describing the clocks up to 'pll8k' as 'clkext3'
is assigned to a dummy clock.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 7 Dec 2023 10:26:31 +0000 (07:26 -0300)]
ARM: dts: imx23/28: Fix the DMA controller node name
Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'.
Change it to fix the following dt-schema warning.
imx28-apf28.dtb: dma-apbx@
80024000: $nodename:0: 'dma-apbx@
80024000' does not match '^dma-controller(@.*)?$'
from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 7 Dec 2023 10:12:12 +0000 (07:12 -0300)]
ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
The 'gpios' property to describe the SDA and SCL GPIOs is considered
deprecated according to i2c-gpio.yaml.
Switch to the preferred 'sda-gpios' and 'scl-gpios' properties.
This fixes the following schema warnings:
imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 20:19:05 +0000 (17:19 -0300)]
ARM: dts: imx27-apf27dev: Fix LED name
Per leds-gpio.yaml, the led names should start with 'led'.
Change it to fix the following dt-schema warning:
imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 20:14:05 +0000 (17:14 -0300)]
ARM: dts: imx25/27: Pass timing0
Per display-timings.yaml, the 'timing' pattern should be used to
describe the display timings.
Change it accordingly to fix the following dt-schema warning:
imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 20:00:33 +0000 (17:00 -0300)]
ARM: dts: imx25: Fix the iim compatible string
Per imx-iim.yaml, the compatible string should only contain a single
entry.
Use it as "fsl,imx25-iim" to fix the following dt-schema warning:
imx25-karo-tx25.dtb: efuse@
53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long
from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Geert Uytterhoeven [Wed, 13 Dec 2023 09:32:25 +0000 (10:32 +0100)]
arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control
The pin control description for the serial console was added, but not
enabled, due to missing pinctrl properties in the serial port device
node.
Fixes: 7a8d590de8132853 ("arm64: dts: renesas: white-hawk-cpu: Add serial port pin control")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8a51516581cd71ecbfa174af9c7cebad1fc83c5b.1702459865.git.geert+renesas@glider.be
Claudiu Beznea [Thu, 7 Dec 2023 07:07:00 +0000 (09:07 +0200)]
arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces
The RZ/G3S Smarc Module has Ethernet PHYs (KSZ9131) connected to each
Ethernet IP. For this, add proper DT descriptions to enable Ethernet
communication through these PHYs.
The interface b/w PHYs and MACs is RGMII. The skew settings were set to
zero as based on phy-mode (rgmii-id) the KSZ9131 driver enables internal
DLL, which adds a 2ns delay b/w clocks (TX/RX) and data signals.
Different pin settings were applied to TXC and TX_CTL compared with the
rest of the RGMII pins to comply with requirements for these pins
imposed by HW manual of RZ/G3S (see chapters "Ether Ch0 Voltage Mode
Control Register (ETH0_POC)", "Ether Ch1 Voltage Mode Control Register
(ETH1_POC)", for power source selection, "Ether MII/RGMII Mode Control
Register (ETH_MODE)" for output-enable and "Input Enable Control
Register (IEN_m)" for input-enable configurations).
Also enable the Ethernet interfaces by selecting SW_CONFIG3 = SW_ON.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-12-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Claudiu Beznea [Thu, 7 Dec 2023 07:06:59 +0000 (09:06 +0200)]
arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities
The intention of the SW_SD0_DEV_SEL and SW_SD2_EN macros was to reflect the
state of the SW_CONFIG individual switches available on the RZ/G3S Smarc
Module, and at the same time to have a descriptive name for the switches
themselves. Each individual switch is associated with a signal name,
which might be active-low or not on the board. Using signal names
instead of SW_CONFIG switch names may be confusing for a user who just
playes with switches to select individual functionalities, but also for
an advanced user who looks at the schematics. To avoid even further
confusion, use the switches' names here and instantiate them with an
ON/OFF state. This should be simpler, even though the name of the
switches is not that intuitive. The switches' names documentation
reflects the switches' purposes.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-11-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Claudiu Beznea [Thu, 7 Dec 2023 07:06:58 +0000 (09:06 +0200)]
arm64: dts: renesas: r9a08g045: Add Ethernet nodes
Add the Ethernet nodes available on RZ/G3S (R9A08G045).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-10-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Claudiu Beznea [Mon, 20 Nov 2023 11:18:20 +0000 (13:18 +0200)]
arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node
Add IA55 interrupt controller node and set it as interrupt parent for pin
controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-10-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fabio Estevam [Wed, 6 Dec 2023 15:00:23 +0000 (12:00 -0300)]
ARM: dts: imx25: Move usbphy nodes out of simple-bus
The USB PHY nodes should not be described under 'simple-bus'.
Move it out of simple-bus.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 15:00:22 +0000 (12:00 -0300)]
ARM: dts: imx1: Use 'bus' for AIPI bus
Per simple-bus.yaml, 'aipi' is not a valid node name.
Change it to 'bus' to fix the following dt-schema warning:
imx1-apf9328.dtb: aipi@200000: $nodename:0: 'aipi@200000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 15:00:21 +0000 (12:00 -0300)]
ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus
The USB PHY nodes should not be described under 'simple-bus'.
Move it out of simple-bus.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 15:00:20 +0000 (12:00 -0300)]
ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus
The USB PHY should not be described under 'simple-bus'.
Move it out of simple-bus.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 15:00:19 +0000 (12:00 -0300)]
ARM: dts: imx27: Use 'bus' for EMI bus
Per simple-bus.yaml, 'emi' is not a valid node name.
Change it to 'bus' to fix the following dt-schema warning:
imx25-pdk.dtb: emi@
80000000: $nodename:0: 'emi@
80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 15:00:18 +0000 (12:00 -0300)]
ARM: dts: imx27: Use 'bus' for AIPI bus
Per simple-bus.yaml, 'aipi' is not a valid node name.
Change it to 'bus' to fix the following dt-schema warning:
imx27-pdk.dtb: aipi@
10020000: $nodename:0: 'aipi@
10020000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Gregor Herburger [Wed, 6 Dec 2023 14:01:02 +0000 (15:01 +0100)]
arm64: dts: freescale: add fsl-lx2160a-mblx2160a board
Add the different serdes configurations as overlays.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Gregor Herburger [Wed, 6 Dec 2023 14:01:01 +0000 (15:01 +0100)]
dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
TQMLX2160A is a TQ-Systems GmbH SoM using the LX2160A SoC.
MBLX2160a is the starterkit baseboard for TQMLX2160A.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 12:45:29 +0000 (09:45 -0300)]
ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
According to Documentation/devicetree/bindings/sound/imx-audmux.yaml,
there must be a "mux-" prefix in the audmux port nodes.
Add the "mux-" prefix to avoid the following dt-schema warning:
imx27-phytec-phycore-rdk.dtb: audmux@
10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 12:39:21 +0000 (09:39 -0300)]
ARM: dts: imx1: Fix sram node
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
The node name should be sram.
Change the node name and pass the required properties to fix the
following dt-schema warnings:
imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 12:39:20 +0000 (09:39 -0300)]
ARM: dts: imx27: Fix sram node
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
Pass them to fix the following dt-schema warnings:
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 12:36:05 +0000 (09:36 -0300)]
ARM: dts: imx: Use flash@0,0 pattern
Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern.
Change it to 'flash@0,0' to fix the following dt-schema warning:
imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 11:58:26 +0000 (08:58 -0300)]
ARM: dts: imx25/27-eukrea: Fix RTC node name
Node names should be generic. Use 'rtc' as node name to fix
the following dt-schema warning:
imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 11:58:25 +0000 (08:58 -0300)]
ARM: dts: imx25-pdk: Pass #sound-dai-cells
Per sgtl5000.yaml, '#sound-dai-cells' is a required property.
Pass it to fix the following dt-schema warning:
imx25-pdk.dtb: sgtl5000@a: '#sound-dai-cells' is a required property
from schema $id: http://devicetree.org/schemas/sound/sgtl5000.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 11:58:24 +0000 (08:58 -0300)]
ARM: dts: imx25: Pass I2C clock-names property
Per i2c-imx.yaml, 'clock-names' is a required property.
Pass it to fix the following dt-schema warning:
imx25-pdk.dtb: i2c@
43f80000: clock-names:0: 'ipg' was expected
from schema $id: http://devicetree.org/schemas/i2c/i2c-imx.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Tue, 17 Oct 2023 19:46:57 +0000 (15:46 -0400)]
arm64: dts: freescale: imx93: add i3c1 and i3c2
Add I3C1 and I3C2.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Fri, 29 Sep 2023 18:55:10 +0000 (15:55 -0300)]
arm64: dts: ls1012a: Remove big-endian from thermal
Per qoriq-thermal.yaml, 'big-endian' is not a valid property.
When the 'little-endian' property is absent, the default is big endian.
Remove it to fix the following schema warning:
tmu@
1f00000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Chris Morgan [Mon, 20 Nov 2023 23:01:31 +0000 (17:01 -0600)]
arm64: dts: rockchip: Add Anbernic RG351V
Add support for the Anbernic RG351V, which is a handheld gaming console
from Anbernic with an RK3326 SoC, a 640x480 LCD display, a single
analog joystick with several face buttons, two USB C ports, and
internal WiFi over USB. All hardware has been tested as working
except for the battery, which will require further modification to the
mainline rk817 battery driver before it can be used (the device was
built without a shunt resistor, and as such the battery cannot
measure current; only voltage).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231120230131.57705-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chris Morgan [Mon, 20 Nov 2023 23:01:30 +0000 (17:01 -0600)]
arm64: dts: rockchip: Split RG351M from Odroid Go Advance
Split the RG351M into its own DTSI file. The RG351M, unlike the Odroid
Go Advance, has no ADC joysticks, no GPIO buttons (except for volume
on the RG351V), a PWM vibrator that interferes with an Odroid
regulator, and different LEDs. Split the RG351M into a DTSI file
that can then be imported into the DTS files for the RG351M and a
new RG351V.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231120230131.57705-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chris Morgan [Mon, 20 Nov 2023 23:01:29 +0000 (17:01 -0600)]
dt-bindings: arm: rockchip: Add Anbernic RG351V
The Anbernic RG351V is a portable gaming console from Anbernic with the
RK3326 SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231120230131.57705-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dragan Simic [Tue, 12 Dec 2023 08:01:40 +0000 (09:01 +0100)]
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
Add ethernet0 alias to the board dts files for a few supported RK3588 and
RK3588S boards that had it missing.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/9af2026bf8a5538aff627381289cb06f2fab4263.1702368023.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dragan Simic [Tue, 12 Dec 2023 08:01:39 +0000 (09:01 +0100)]
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
Add ethernet0 alias to the board dts files for a few supported RK3566 boards
that had it missing. Also, remove the ethernet0 alias from one RK3566 SoM
dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to
the dependent board dts files, which actually enable the GMAC.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dragan Simic [Tue, 12 Dec 2023 07:53:51 +0000 (08:53 +0100)]
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
Not all supported boards actually use the PX30's built-in (G)MAC, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 alias from the PX30 SoC dtsi file, and add the same
alias back to the appropriate board dts(i) files.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/0d9da8959b4f567622676c34b5feb74c49489554.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dragan Simic [Tue, 12 Dec 2023 07:53:50 +0000 (08:53 +0100)]
arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
Not all supported boards actually use the RK3328's built-in GMACs, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 and ethernet1 aliases from the RK3328 SoC dtsi file,
and add the same alias back to the appropriate board dts(i) files.
These changes also touch one RK3318-based board dts, because it actually
depends on the RK3328 SoC dtsi and enables one of the GMACs.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/0c14f2e354d32f5d45c718ce16643553ca72f6a5.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dragan Simic [Tue, 12 Dec 2023 07:53:49 +0000 (08:53 +0100)]
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
Not all supported boards actually use the RK3368's built-in GMAC, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 alias from the RK3368 SoC dtsi file, and add the
same alias back to the appropriate board dts(i) files.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/77115184d633190c917d868f883070e100d93dbc.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dragan Simic [Tue, 12 Dec 2023 07:53:48 +0000 (08:53 +0100)]
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
Not all supported boards actually use the RK3399's built-in GMAC, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 alias from the RK3399 SoC dtsi file, and add the
same alias back to the appropriate board dts(i) files.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20879826c01fb9ead71c339866846ea794669802.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
David Heidelberg [Sat, 9 Dec 2023 17:15:40 +0000 (18:15 +0100)]
arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
No functional changes.
Adjust to comply with dt-schema requirements
and make possible to validate values.
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20231209171653.85468-2-david@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Johan Jonker [Sat, 2 Dec 2023 18:22:58 +0000 (19:22 +0100)]
arm64: dts: rockchip: add gpio alias for gpio dt nodes
Rockchip SoC TRM, SoC datasheet and board schematics always refer to
the same gpio numbers - even if not all are used for a specific board.
In order to not have to re-define them for every board add the
aliases to SoC dtsi files.
Co-developed-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/56daeead-1d35-44bb-00c0-614b84a986de@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Lukasz Luba [Mon, 27 Nov 2023 08:15:11 +0000 (08:15 +0000)]
arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
Add dynamic-power-coefficient to the GPU node. That will create Energy
Model for the GPU based on the coefficient and OPP table information.
It will enable mechanism such as DTMP or IPA to work with the GPU DVFS.
In similar way the Energy Model for CPUs in rk3399 is created, so both
are aligned in power scale. The maximum power used from this coefficient
is 1.5W at 600MHz.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20231127081511.1911706-1-lukasz.luba@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stuebner [Tue, 5 Dec 2023 16:48:42 +0000 (17:48 +0100)]
arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
The spi controllers on rk3588 are named spi0 - spi4. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
Userspace spi access is a thing afterall.
To prevent each board repeating their list of spi aliases, define them
in the soc dtsi, as previous Rockchip soc like the rk356x do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-5-heiko@sntech.de
Heiko Stuebner [Tue, 5 Dec 2023 16:48:41 +0000 (17:48 +0100)]
arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
The gpio controllers on rk3588 are named gpio0 - gpio4. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
Userspace gpio access is a thing afterall.
To prevent each board repeating their list of gpio aliases, define them
in the soc dtsi, as previous Rockchip soc like the rk356x do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-4-heiko@sntech.de
Heiko Stuebner [Tue, 5 Dec 2023 16:48:40 +0000 (17:48 +0100)]
arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
The i2c controllers on rk3588 are named i2c0 - i2c8. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
Userspace i2c access is a thing afterall.
To prevent each board repeating their list of i2c aliases, define them
in the soc dtsi, as all previous Rockchip soc do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-3-heiko@sntech.de
Heiko Stuebner [Tue, 5 Dec 2023 16:48:39 +0000 (17:48 +0100)]
arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
The serial ports on rk3588 are named uart0 - uart9. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
To prevent each board repeating their list of serial aliases, move them
to the soc dtsi, as all previous Rockchip soc do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-2-heiko@sntech.de
Heiko Stuebner [Fri, 1 Dec 2023 19:11:03 +0000 (20:11 +0100)]
arm64: dts: rockchip: add Theobroma Jaguar SBC
Add a board dts for the Jaguar SBC from Theobroma-Systems
JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and
is targeting Autonomous Mobile Robots (AMR).
It features:
* LPDDR4X (up to 16GB)
* 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131)
* PCIe 3.0 4-lane on M.2 M-key connector
* PCIe 2.1 1-lane on M.2 E-key
* USB 2.0 on M.2 E-key
* 2x USB3 OTG type-c ports with DP Alt-Mode
* USB2 host port
* HDMI output
* 2x camera connectors, each exposing:
* 2-lane MIPI-CSI
* 1v2, 1v8, 2v8 power rails
* I2C bus
* GPIOs
* PPS input
* CAN
* RS485 UART
* FAN connector
* SD card slot
* eMMC (up to 256GB)
* RTC backup battery
* Companion microcontroller
* ISL1208 RTC emulation
* AMC6821 PWM emulation
* On/off buzzer control
* Secure Element
* 80-pin Mezzanine connector for daughterboards:
* GPIOs
* 1Gbps Ethernet
* PCIe 2.1 1-lane
* 2x 2-lane MIPI-CSI
* ADC channel
* I2C bus
* PWM
* UART
* SPI
* SDIO
* CAN
* I2S
* 1v8, 3v3, 5v0, dc-in (12-24V) power rails
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20231201191103.343097-3-heiko@sntech.de
Heiko Stuebner [Fri, 1 Dec 2023 19:11:02 +0000 (20:11 +0100)]
dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
Add the binding for the Jaguar board from Theobroma-Systems.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231201191103.343097-2-heiko@sntech.de
Chris Morgan [Mon, 4 Dec 2023 18:57:19 +0000 (12:57 -0600)]
arm64: dts: rockchip: Add Powkiddy X55
Add support for the Powkiddy X55. The Powkiddy X55 is a handheld
gaming device with a 720p 5.5 inch screen powered by the Rockchip
RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC
joysticks powered by 4 dedicated ADC channels, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an
8GB internal eMMC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231204185719.569021-11-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
projects / linux.git / log