git.maquefel.me Git - linux.git/log

Merge tag 'net-6.7-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.

  Current release - regressions:

   - veth: fix packet segmentation in veth_convert_skb_to_xdp_buff

  Current release - new code bugs:

   - tcp: assorted fixes to the new Auth Option support

  Older releases - regressions:

   - tcp: fix mid stream window clamp

   - tls: fix incorrect splice handling

   - ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()

   - dsa: mv88e6xxx: restore USXGMII support for 6393X

   - arcnet: restore support for multiple Sohard Arcnet cards

  Older releases - always broken:

   - tcp: do not accept ACK of bytes we never sent

   - require admin privileges to receive packet traces via netlink

   - packet: move reference count in packet_sock to atomic_long_t

   - bpf:
      - fix incorrect branch offset comparison with cpu=v4
      - fix prog_array_map_poke_run map poke update

   - netfilter:
      - three fixes for crashes on bad admin commands
      - xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
      - nf_tables: fix 'exist' matching on bigendian arches

   - leds: netdev: fix RTNL handling to prevent potential deadlock

   - eth: tg3: prevent races in error/reset handling

   - eth: r8169: fix rtl8125b PAUSE storm when suspended

   - eth: r8152: improve reset and surprise removal handling

   - eth: hns: fix race between changing features and sending

   - eth: nfp: fix sleep in atomic for bonding offload"

* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
  net/smc: fix missing byte order conversion in CLC handshake
  net: dsa: microchip: provide a list of valid protocols for xmit handler
  drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
  psample: Require 'CAP_NET_ADMIN' when joining "packets" group
  bpf: sockmap, updating the sg structure should also update curr
  net: tls, update curr on splice as well
  nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
  net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
  tcp: do not accept ACK of bytes we never sent
  selftests/bpf: Add test for early update in prog_array_map_poke_run
  bpf: Fix prog_array_map_poke_run map poke update
  netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
  netfilter: nf_tables: validate family when identifying table via handle
  netfilter: nf_tables: bail out on mismatching dynset and set expressions
  netfilter: nf_tables: fix 'exist' matching on bigendian arches
  netfilter: nft_set_pipapo: skip inactive elements during set walk
  netfilter: bpf: fix bad registration on nf_defrag
  leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
  octeontx2-af: Update Tx link register range
  ...

Merge tag 'cgroup-for-6.7-rc4-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
"Just one fix.

  Commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
  changed how freezing state is recorded which made cgroup_freezing()
  disagree with the actual state of the task while thawing triggering a
  warning. Fix it by updating cgroup_freezing()"

* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup_freezer: cgroup_freezing: Check if not frozen

Merge tag 'wq-for-6.7-rc4-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fix from Tejun Heo:
"Just one patch to fix a bug which can crash the kernel if the
  housekeeping and wq_unbound_cpu cpumask configuration combination
  leaves the latter empty"

* tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Make sure that wq_unbound_cpumask is never empty

Merge tag 'regmap-fix-v6.7-rc4' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"An incremental fix for the fix introduced during the merge window for
  caching of the selector for windowed register ranges. We were
  incorrectly leaking an error code in the case where the last selector
  accessed was for some reason not cached"

* tag 'regmap-fix-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: fix bogus error on regcache_sync success

Merge tag 'devicetree-fixes-for-6.7-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

- Fix dt-extract-compatibles for builds with in tree build directory

- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email

- Fix the of_reconfig_get_state_change() return value documentation

- Add missing #power-domain-cells property to QCom MPM

- Fix warnings in i.MX LCDIF and adi,adv7533

* tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: adi,adv75xx: Document #sound-dai-cells
  dt-bindings: lcdif: Properly describe the i.MX23 interrupts
  dt-bindings: interrupt-controller: Allow #power-domain-cells
  of: dynamic: Fix of_reconfig_get_state_change() return value documentation
  dt-bindings: display: mediatek: dsi: remove Xinlei's mail
  dt: dt-extract-compatibles: Don't follow symlinks when walking tree

Merge tag 'platform-drivers-x86-v6.7-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

- Fix i8042 filter resource handling, input, and suspend issues in
   asus-wmi

- Skip zero instance WMI blocks to avoid issues with some laptops

- Differentiate dev/production keys in mlxbf-bootctl

- Correct surface serdev related return value to avoid leaking errno
   into userspace

- Error checking fixes

* tag 'platform-drivers-x86-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/mellanox: Check devm_hwmon_device_register_with_groups() return value
  platform/mellanox: Add null pointer checks for devm_kasprintf()
  mlxbf-bootctl: correctly identify secure boot with development keys
  platform/x86: wmi: Skip blocks with zero instances
  platform/surface: aggregator: fix recv_buf() return value
  platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspend
  platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbd
  platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filter
  platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code

Merge tag 'x86-int80-20231207' of git://git./linux/kernel/git/tip/tip

Pull x86 int80 fixes from Dave Hansen:
"Avoid VMM misuse of 'int 0x80' handling in TDX and SEV guests.

  It also has the very nice side effect of getting rid of a bunch of
  assembly entry code"

* tag 'x86-int80-20231207' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tdx: Allow 32-bit emulation by default
  x86/entry: Do not allow external 0x80 interrupts
  x86/entry: Convert INT 0x80 emulation to IDTENTRY
  x86/coco: Disable 32-bit emulation by default on TDX and SEV

vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning

After backporting commit 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY
flag support") in CentOS Stream 9, CI reported the following error:

    In file included from ./include/linux/kernel.h:17,
                     from ./include/linux/list.h:9,
                     from ./include/linux/preempt.h:11,
                     from ./include/linux/spinlock.h:56,
                     from net/vmw_vsock/virtio_transport_common.c:9:
    net/vmw_vsock/virtio_transport_common.c: In function ‘virtio_transport_can_zcopy‘:
    ./include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
       20 |         (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
          |                                   ^~
    ./include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck‘
       26 |                 (__typecheck(x, y) && __no_side_effects(x, y))
          |                  ^~~~~~~~~~~
    ./include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp‘
       36 |         __builtin_choose_expr(__safe_cmp(x, y), \
          |                               ^~~~~~~~~~
    ./include/linux/minmax.h:45:25: note: in expansion of macro ‘__careful_cmp‘
       45 | #define min(x, y)       __careful_cmp(x, y, <)
          |                         ^~~~~~~~~~~~~
    net/vmw_vsock/virtio_transport_common.c:63:37: note: in expansion of macro ‘min‘
       63 |                 int pages_to_send = min(pages_in_iov, MAX_SKB_FRAGS);

We could solve it by using min_t(), but this operation seems entirely
unnecessary, because we also pass MAX_SKB_FRAGS to iov_iter_npages(),
which performs almost the same check, returning at most MAX_SKB_FRAGS
elements. So, let's eliminate this unnecessary comparison.

Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Cc: avkrasnov@salutedevices.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Link: https://lore.kernel.org/r/20231206164143.281107-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: fix missing byte order conversion in CLC handshake

The byte order conversions of ISM GID and DMB token are missing in
process of CLC accept and confirm. So fix it.

Fixes: 3d9725a6a133 ("net/smc: common routine for CLC accept and confirm")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: microchip: provide a list of valid protocols for xmit handler

Provide a list of valid protocols for which the driver will provide
it's deferred xmit handler.

When using DSA_TAG_PROTO_KSZ8795 protocol, it does not provide a
"connect" method, therefor ksz_connect() is not allocating ksz_tagger_data.

This avoids the following null pointer dereference:
ksz_connect_tag_protocol from dsa_register_switch+0x9ac/0xee0
dsa_register_switch from ksz_switch_register+0x65c/0x828
ksz_switch_register from ksz_spi_probe+0x11c/0x168
ksz_spi_probe from spi_probe+0x84/0xa8
spi_probe from really_probe+0xc8/0x2d8

Fixes: ab32f56a4100 ("net: dsa: microchip: ptp: add packet transmission timestamping")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231206071655.1626479-1-sean@geanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'generic-netlink-multicast-fixes'

Ido Schimmel says:

====================
Generic netlink multicast fixes

Restrict two generic netlink multicast groups - in the "psample" and
"NET_DM" families - to be root-only with the appropriate capabilities.
See individual patches for more details.
====================

Link: https://lore.kernel.org/r/20231206213102.1824398-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group

The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.

Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.

A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.

Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.

Tested using [1].

Before:

# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo

After:

# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group

[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>

int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;

sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}

err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}

grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}

err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}

return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c

Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

psample: Require 'CAP_NET_ADMIN' when joining "packets" group

The "psample" generic netlink family notifies sampled packets over the
"packets" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will
prevent non-root users or root without the 'CAP_NET_ADMIN' capability
(in the user namespace owning the network namespace) from joining the
group.

Tested using [1].

Before:

# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo

After:

# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo
Failed to join "packets" multicast group

[1]
$ cat psample.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>

int join_grp(struct nl_sock *sk, const char *grp_name)
{
int grp, err;

grp = genl_ctrl_resolve_grp(sk, "psample", grp_name);
if (grp < 0) {
fprintf(stderr, "Failed to resolve \"%s\" multicast group\n",
grp_name);
return grp;
}

err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"%s\" multicast group\n",
grp_name);
return err;
}

return 0;
}

int main(int argc, char **argv)
{
struct nl_sock *sk;
int err;

sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}

err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}

err = join_grp(sk, "config");
if (err)
return err;

err = join_grp(sk, "packets");
if (err)
return err;

return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c

Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fixes-for-ktls'

John Fastabend says:

====================
Couple fixes for TLS and BPF interactions.
====================

Link: https://lore.kernel.org/r/20231206232706.374377-1-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf: sockmap, updating the sg structure should also update curr

Curr pointer should be updated when the sg structure is shifted.

Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: tls, update curr on splice as well

The curr pointer must also be updated on the splice similar to how
we do this for other copy types.

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

x86/tdx: Allow 32-bit emulation by default

32-bit emulation was disabled on TDX to prevent a possible attack by
a VMM injecting an interrupt on vector 0x80.

Now that int80_emulation() has a check for external interrupts the
limitation can be lifted.

To distinguish software interrupts from external ones, int80_emulation()
checks the APIC ISR bit relevant to the 0x80 vector. For
software interrupts, this bit will be 0.

On TDX, the VAPIC state (including ISR) is protected and cannot be
manipulated by the VMM. The ISR bit is set by the microcode flow during
the handling of posted interrupts.

[ dhansen: more changelog tweaks ]

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+

x86/entry: Do not allow external 0x80 interrupts

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
also triggers the same codepath.

An external interrupt on vector 0x80 will currently be interpreted as a
32-bit system call, and assuming that it was a user context.

Panic on external interrupts on the vector.

To distinguish software interrupts from external ones, the kernel checks
the APIC ISR bit relevant to the 0x80 vector. For software interrupts,
this bit will be 0.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+

x86/entry: Convert INT 0x80 emulation to IDTENTRY

There is no real reason to have a separate ASM entry point implementation
for the legacy INT 0x80 syscall emulation on 64-bit.

IDTENTRY provides all the functionality needed with the only difference
that it does not:

- save the syscall number (AX) into pt_regs::orig_ax
- set pt_regs::ax to -ENOSYS

Both can be done safely in the C code of an IDTENTRY before invoking any of
the syscall related functions which depend on this convention.

Aside of ASM code reduction this prepares for detecting and handling a
local APIC injected vector 0x80.

[ kirill.shutemov: More verbose comments ]
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+

x86/coco: Disable 32-bit emulation by default on TDX and SEV

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
triggers the same handler.

The kernel interprets an external interrupt on vector 0x80 as a 32-bit
system call that came from userspace.

A VMM can inject external interrupts on any arbitrary vector at any
time. This remains true even for TDX and SEV guests where the VMM is
untrusted.

Put together, this allows an untrusted VMM to trigger int80 syscall
handling at any given point. The content of the guest register file at
that moment defines what syscall is triggered and its arguments. It
opens the guest OS to manipulation from the VMM side.

Disable 32-bit emulation by default for TDX and SEV. User can override
it with the ia32_emulation=y command line option.

[ dhansen: reword the changelog ]

Reported-by: Supraja Sridhara <supraja.sridhara@inf.ethz.ch>
Reported-by: Benedict Schlüter <benedict.schlueter@inf.ethz.ch>
Reported-by: Mark Kuhne <mark.kuhne@inf.ethz.ch>
Reported-by: Andrin Bertschi <andrin.bertschi@inf.ethz.ch>
Reported-by: Shweta Shinde <shweta.shinde@inf.ethz.ch>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+: 1da5c9b x86: Introduce ia32_enabled()
Cc: <stable@vger.kernel.org> # v6.0+

Merge tag 'nf-23-12-06' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Incorrect nf_defrag registration for bpf link infra, from D. Wythe.

2) Skip inactive elements in pipapo set backend walk to avoid double
   deactivation, from Florian Westphal.

3) Fix NFT_*_F_PRESENT check with big endian arch, also from Florian.

4) Bail out if number of expressions in NFTA_DYNSET_EXPRESSIONS mismatch
   stateful expressions in set declaration.

5) Honor family in table lookup by handle. Broken since 4.16.

6) Use sk_callback_lock to protect access to sk->sk_socket in xt_owner.
   sock_orphan() might zap this pointer, from Phil Sutter.

All of these fixes address broken stuff for several releases.

* tag 'nf-23-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
  netfilter: nf_tables: validate family when identifying table via handle
  netfilter: nf_tables: bail out on mismatching dynset and set expressions
  netfilter: nf_tables: fix 'exist' matching on bigendian arches
  netfilter: nft_set_pipapo: skip inactive elements during set walk
  netfilter: bpf: fix bad registration on nf_defrag
====================

Link: https://lore.kernel.org/r/20231206180357.959930-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-12-06

We've added 4 non-merge commits during the last 6 day(s) which contain
a total of 7 files changed, 185 insertions(+), 55 deletions(-).

The main changes are:

1) Fix race found by syzkaller on prog_array_map_poke_run when
   a BPF program's kallsym symbols were still missing, from Jiri Olsa.

2) Fix BPF verifier's branch offset comparison for BPF_JMP32 | BPF_JA,
   from Yonghong Song.

3) Fix xsk's poll handling to only set mask on bound xsk sockets,
   from Yewon Choi.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add test for early update in prog_array_map_poke_run
  bpf: Fix prog_array_map_poke_run map poke update
  xsk: Skip polling event check for unbound socket
  bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4
====================

Link: https://lore.kernel.org/r/20231206220528.12093-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: flower: fix for take a mutex lock in soft irq context and rcu lock

The neighbour event callback call the function nfp_tun_write_neigh,
this function will take a mutex lock and it is in soft irq context,
change the work queue to process the neighbour event.

Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock()
in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6.

Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'parisc-for-6.7-rc5' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
"A single line patch for parisc which fixes the build in tinyconfig
  configurations:

   - Fix asm operand number out of range build error in bug table"

* tag 'parisc-for-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix asm operand number out of range build error in bug table

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-05 (ice, i40e, iavf)

This series contains updates to ice, i40e and iavf drivers.

Michal fixes incorrect usage of VF MSIX value and index calculation for
ice.

Marcin restores disabling of Rx VLAN filtering which was inadvertently
removed for ice.

Ivan Vecera corrects improper messaging of MFS port for i40e.

Jake fixes incorrect checking of coalesce values on iavf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero
  i40e: Fix unexpected MFS warning message
  ice: Restore fix disabling RX VLAN filtering
  ice: change vfs.num_msix_per to vf->num_msix
====================

Link: https://lore.kernel.org/r/20231205211918.2123019-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: Restore USXGMII support for 6393X

In 4a56212774ac, USXGMII support was added for 6393X, but this was
lost in the PCS conversion (the blamed commit), most likely because
these efforts where more or less done in parallel.

Restore this feature by porting Michal's patch to fit the new
implementation.

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Michal Smulski <michal.smulski@ooma.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: e5b732a275f5 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: do not accept ACK of bytes we never sent

This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.

ACK seq validation is currently following RFC 5961 5.2 guidelines:

   The ACK value is considered acceptable only if
   it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
   SND.NXT).  All incoming segments whose ACK value doesn't satisfy the
   above condition MUST be discarded and an ACK sent back.  It needs to
   be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
   duplicate (SEG.ACK < SND.UNA), it can be ignored.  If the ACK
   acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
   ACK, drop the segment, and return".  The "ignored" above implies that
   the processing of the incoming data segment continues, which means
   the ACK value is treated as acceptable.  This mitigation makes the
   ACK check more stringent since any ACK < SND.UNA wouldn't be
   accepted, instead only ACKs that are in the range ((SND.UNA -
   MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.

This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.

This greatly improves TCP security at a little cost.

I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.

tp->bytes_acked was added in linux-4.2

Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:

0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0

// ---------------- Handshake ------------------- //

// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.

+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4

// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997

// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535

// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001

Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: display: adi,adv75xx: Document #sound-dai-cells

When using audio from ADV7533 or ADV7535 and describing the audio
card via simple-audio-card, the '#sound-dai-cells' needs to be passed.

Document the '#sound-dai-cells' property to fix the following
dt-schema warning:

imx8mn-beacon-kit.dtb: hdmi@3d: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20231206093643.2198562-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: lcdif: Properly describe the i.MX23 interrupts

i.MX23 has two LCDIF interrupts instead of a single one like other
i.MX devices.

Take this into account for properly describing the i.MX23 LCDIF
interrupts.

This fixes the following dt-schema warning:

imx23-olinuxino.dtb: lcdif@80030000: interrupts: [[46], [45]] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231206112337.2234849-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

selftests/bpf: Add test for early update in prog_array_map_poke_run

Adding test that tries to trigger the BUG_IN during early map update
in prog_array_map_poke_run function.

The idea is to share prog array map between thread that constantly
updates it and another one loading a program that uses that prog
array.

Eventually we will hit a place where the program is ok to be updated
(poke->tailcall_target_stable check) but the address is still not
registered in kallsyms, so the bpf_arch_text_poke returns -EINVAL
and cause imbalance for the next tail call update check, which will
fail with -EBUSY in bpf_arch_text_poke as described in previous fix.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-3-jolsa@kernel.org

bpf: Fix prog_array_map_poke_run map poke update

Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.

There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.

The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.

I'm hitting following race during the program load:

  CPU 0                             CPU 1

  bpf_prog_load
    bpf_check
      do_misc_fixups
        prog_array_map_poke_track

                                    map_update_elem
                                      bpf_fd_array_map_update_elem
                                        prog_array_map_poke_run

                                          bpf_arch_text_poke returns -EINVAL

    bpf_prog_kallsyms_add

After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.

Similar race exists on the program unload.

Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.

Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.

  [0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810

Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Lee Jones <lee@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org

netfilter: xt_owner: Fix for unsafe access of sk->sk_socket

A concurrently running sock_orphan() may NULL the sk_socket pointer in
between check and deref. Follow other users (like nft_meta.c for
instance) and acquire sk_callback_lock before dereferencing sk_socket.

Fixes: 0265ab44bacc ("[NETFILTER]: merge ipt_owner/ip6t_owner in xt_owner")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: validate family when identifying table via handle

Validate table family when looking up for it via NFTA_TABLE_HANDLE.

Fixes: 3ecbfd65f50e ("netfilter: nf_tables: allocate handle and delete objects via handle")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: bail out on mismatching dynset and set expressions

If dynset expressions provided by userspace is larger than the declared
set expressions, then bail out.

Fixes: 48b0ae046ee9 ("netfilter: nftables: netlink support for several set element expressions")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: fix 'exist' matching on bigendian arches

Maze reports "tcp option fastopen exists" fails to match on
OpenWrt 22.03.5, r20134-5f15225c1e (5.10.176) router.

"tcp option fastopen exists" translates to:
inet
[ exthdr load tcpopt 1b @ 34 + 0 present => reg 1 ]
[ cmp eq reg 1 0x00000001 ]

.. but existing nft userspace generates a 1-byte compare.

On LSB (x86), "*reg32 = 1" is identical to nft_reg_store8(reg32, 1), but
not on MSB, which will place the 1 last. IOW, on bigendian aches the cmp8
is awalys false.

Make sure we store this in a consistent fashion, so existing userspace
will also work on MSB (bigendian).

Regardless of this patch we can also change nft userspace to generate
'reg32 == 0' and 'reg32 != 0' instead of u8 == 0 // u8 == 1 when
adding 'option x missing/exists' expressions as well.

Fixes: 3c1fece8819e ("netfilter: nft_exthdr: Allow checking TCP option presence, too")
Fixes: b9f9a485fb0e ("netfilter: nft_exthdr: add boolean DCCP option matching")
Fixes: 055c4b34b94f ("netfilter: nft_fib: Support existence check")
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/CAHo-OozyEqHUjL2-ntATzeZOiuftLWZ_HU6TOM_js4qLfDEAJg@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: skip inactive elements during set walk

Otherwise set elements can be deactivated twice which will cause a crash.

Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: bpf: fix bad registration on nf_defrag

We should pass a pointer to global_hook to the get_proto_defrag_hook()
instead of its value, since the passed value won't be updated even if
the request module was loaded successfully.

Log:

[   54.915713] nf_defrag_ipv4 has bad registration
[   54.915779] WARNING: CPU: 3 PID: 6323 at net/netfilter/nf_bpf_link.c:62 get_proto_defrag_hook+0x137/0x160
[   54.915835] CPU: 3 PID: 6323 Comm: fentry Kdump: loaded Tainted: G            E      6.7.0-rc2+ #35
[   54.915839] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[   54.915841] RIP: 0010:get_proto_defrag_hook+0x137/0x160
[   54.915844] Code: 4f 8c e8 2c cf 68 ff 80 3d db 83 9a 01 00 0f 85 74 ff ff ff 48 89 ee 48 c7 c7 8f 12 4f 8c c6 05 c4 83 9a 01 01 e8 09 ee 5f ff <0f> 0b e9 57 ff ff ff 49 8b 3c 24 4c 63 e5 e8 36 28 6c ff 4c 89 e0
[   54.915849] RSP: 0018:ffffb676003fbdb0 EFLAGS: 00010286
[   54.915852] RAX: 0000000000000023 RBX: ffff9596503d5600 RCX: ffff95996fce08c8
[   54.915854] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff95996fce08c0
[   54.915855] RBP: ffffffff8c4f12de R08: 0000000000000000 R09: 00000000fffeffff
[   54.915859] R10: ffffb676003fbc70 R11: ffffffff8d363ae8 R12: 0000000000000000
[   54.915861] R13: ffffffff8e1f75c0 R14: ffffb676003c9000 R15: 00007ffd15e78ef0
[   54.915864] FS:  00007fb6e9cab740(0000) GS:ffff95996fcc0000(0000) knlGS:0000000000000000
[   54.915867] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   54.915868] CR2: 00007ffd15e75c40 CR3: 0000000101e62006 CR4: 0000000000360ef0
[   54.915870] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   54.915871] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   54.915873] Call Trace:
[   54.915891]  <TASK>
[   54.915894]  ? __warn+0x84/0x140
[   54.915905]  ? get_proto_defrag_hook+0x137/0x160
[   54.915908]  ? __report_bug+0xea/0x100
[   54.915925]  ? report_bug+0x2b/0x80
[   54.915928]  ? handle_bug+0x3c/0x70
[   54.915939]  ? exc_invalid_op+0x18/0x70
[   54.915942]  ? asm_exc_invalid_op+0x1a/0x20
[   54.915948]  ? get_proto_defrag_hook+0x137/0x160
[   54.915950]  bpf_nf_link_attach+0x1eb/0x240
[   54.915953]  link_create+0x173/0x290
[   54.915969]  __sys_bpf+0x588/0x8f0
[   54.915974]  __x64_sys_bpf+0x20/0x30
[   54.915977]  do_syscall_64+0x45/0xf0
[   54.915989]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[   54.915998] RIP: 0033:0x7fb6e9daa51d
[   54.916001] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2b 89 0c 00 f7 d8 64 89 01 48
[   54.916003] RSP: 002b:00007ffd15e78ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
[   54.916006] RAX: ffffffffffffffda RBX: 00007ffd15e78fc0 RCX: 00007fb6e9daa51d
[   54.916007] RDX: 0000000000000040 RSI: 00007ffd15e78ef0 RDI: 000000000000001c
[   54.916009] RBP: 000000000000002d R08: 00007fb6e9e73a60 R09: 0000000000000001
[   54.916010] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000006
[   54.916012] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
[   54.916014]  </TASK>
[   54.916015] ---[ end trace 0000000000000000 ]---

Fixes: 91721c2d02d3 ("netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

leds: trigger: netdev: fix RTNL handling to prevent potential deadlock

When working on LED support for r8169 I got the following lockdep
warning. Easiest way to prevent this scenario seems to be to take
the RTNL lock before the trigger_data lock in set_device_name().

======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc2-next-20231124+ #2 Not tainted
------------------------------------------------------
bash/383 is trying to acquire lock:
ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev]

but task is already holding lock:
ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9b/0xb50
       mutex_lock_nested+0x16/0x20
       rtnl_lock+0x12/0x20
       set_device_name+0xa9/0x120 [ledtrig_netdev]
       netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev]
       led_trigger_set+0x172/0x2c0
       led_trigger_write+0xf1/0x140
       sysfs_kf_bin_write+0x5d/0x80
       kernfs_fop_write_iter+0x15d/0x210
       vfs_write+0x1f0/0x510
       ksys_write+0x6c/0xf0
       __x64_sys_write+0x14/0x20
       do_syscall_64+0x3f/0xf0
       entry_SYSCALL_64_after_hwframe+0x6c/0x74

-> #0 (&trigger_data->lock){+.+.}-{3:3}:
       __lock_acquire+0x1459/0x25a0
       lock_acquire+0xc8/0x2d0
       __mutex_lock+0x9b/0xb50
       mutex_lock_nested+0x16/0x20
       netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
       call_netdevice_register_net_notifiers+0x5a/0x100
       register_netdevice_notifier+0x85/0x120
       netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
       led_trigger_set+0x172/0x2c0
       led_trigger_write+0xf1/0x140
       sysfs_kf_bin_write+0x5d/0x80
       kernfs_fop_write_iter+0x15d/0x210
       vfs_write+0x1f0/0x510
       ksys_write+0x6c/0xf0
       __x64_sys_write+0x14/0x20
       do_syscall_64+0x3f/0xf0
       entry_SYSCALL_64_after_hwframe+0x6c/0x74

other info that might help us debug this:

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(&trigger_data->lock);
                               lock(rtnl_mutex);
  lock(&trigger_data->lock);

*** DEADLOCK ***

8 locks held by bash/383:
#0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0
#1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210
#2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210
#3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140
#4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140
#5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140
#6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120
#7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20

stack backtrace:
CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2
Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023
Call Trace:
<TASK>
dump_stack_lvl+0x5c/0xd0
dump_stack+0x10/0x20
print_circular_bug+0x2dd/0x410
check_noncircular+0x131/0x150
__lock_acquire+0x1459/0x25a0
lock_acquire+0xc8/0x2d0
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
__mutex_lock+0x9b/0xb50
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
? __this_cpu_preempt_check+0x13/0x20
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
? __cancel_work_timer+0x11c/0x1b0
? __mutex_lock+0x123/0xb50
mutex_lock_nested+0x16/0x20
? mutex_lock_nested+0x16/0x20
netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
call_netdevice_register_net_notifiers+0x5a/0x100
register_netdevice_notifier+0x85/0x120
netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
led_trigger_set+0x172/0x2c0
? preempt_count_add+0x49/0xc0
led_trigger_write+0xf1/0x140
sysfs_kf_bin_write+0x5d/0x80
kernfs_fop_write_iter+0x15d/0x210
vfs_write+0x1f0/0x510
ksys_write+0x6c/0xf0
__x64_sys_write+0x14/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f269055d034
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034
RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001
RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007
R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000
</TASK>

Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: interrupt-controller: Allow #power-domain-cells

MPM provides a single genpd. Allow #power-domain-cells = <0>.

Fixes: 54fc9851c0e0 ("dt-bindings: interrupt-controller: Add Qualcomm MPM support")
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129-topic-mpmbindingspd-v2-1-acbe909ceee1@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

Merge branch 'octeontx2-af-miscellaneous-fixes'

Geetha sowjanya says:

====================
octeontx2-af: miscellaneous fixes

The series of patches fixes various issues related to mcs
and NIX link registers.

v3-v4:
Used FIELD_PREP macro and proper data types.

v2-v3:
Fixed typo error in patch 4 commit message.

v1-v2:
Fixed author name for patch 5.
Added Reviewed-by.
====================

Link: https://lore.kernel.org/r/20231205080434.27604-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-af: Update Tx link register range

On new silicons the TX channels for transmit level has increased.
This patch fixes the respective register offset range to
configure the newly added channels.

Fixes: b279bbb3314e ("octeontx2-af: NIX Tx scheduler queue config support")
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-af: Add missing mcs flr handler call

If mcs resources are attached to PF/VF. These resources need
to be freed on FLR. This patch add missing mcs flr call on PF FLR.

Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-af: Fix mcs stats register address

This patch adds the miss mcs stats register
for mcs supported platforms.

Fixes: 9312150af8da ("octeontx2-af: cn10k: mcs: Support for stats collection")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-af: Fix mcs sa cam entries size

On latest silicon versions SA cam entries increased to 256.
This patch fixes the datatype of sa_entries in mcs_hw_info
struct to u16 to hold 256 entries.

Fixes: 080bbd19c9dd ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-af: Adjust Tx credits when MCS external bypass is disabled

When MCS external bypass is disabled, MCS returns additional
2 credits(32B) for every packet Tx'ed on LMAC. To account for
these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT
needs to be configured as otherwise NIX Tx credits would overflow
and will never be returned to idle state credit count
causing issues with credit control and MTU change.

This patch fixes the same by configuring CC_MCS_CNT at probe
time for MCS enabled SoC's

Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'tcp-ao-fixes'

Dmitry Safonov says:

====================
TCP-AO fixes

Changes from v4:
- Dropped 2 patches on which there's no consensus. They will require
  more work TBD if they may made acceptable. Those are:
  o "net/tcp: Allow removing current/rnext TCP-AO keys on TCP_LISTEN sockets"
  o "net/tcp: Store SNEs + SEQs on ao_info"

Changes from v3:
- Don't restrict adding any keys on TCP-AO connection in VRF, but only
  the ones that don't match l3index (David)

Changes from v2:
- rwlocks are problematic in net code (Paolo)
  Changed the SNE code to avoid spin/rw locks on RX/TX fastpath by
  double-accounting SEQ numbers for TCP-AO enabled connections.

Changes from v1:
- Use tcp_can_repair_sock() helper to limit TCP_AO_REPAIR (Eric)
- Instead of hook to listen() syscall, allow removing current/rnext keys
  on TCP_LISTEN (addressing Eric's objection)
- Add sne_lock to protect snd_sne/rcv_sne
- Don't move used_tcp_ao in struct tcp_request_sock (Eric)

I've been working on TCP-AO key-rotation selftests and as a result
exercised some corner-cases that are not usually met in production.

Here are a bunch of semi-related fixes:
- Documentation typo (reported by Markus Elfring)
- Proper alignment for TCP-AO option in TCP header that has MAC length
  of non 4 bytes (now a selftest with randomized maclen/algorithm/etc
  passes)
- 3 uAPI restricting patches that disallow more things to userspace in
  order to prevent it shooting itself in any parts of the body
- SNEs READ_ONCE()/WRITE_ONCE() that went missing by my human factor
- Avoid storing MAC length from SYN header as SYN-ACK will use
  rnext_key.maclen (drops an extra check that fails on new selftests)
====================

Link: https://lore.kernel.org/r/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/tcp: Don't store TCP-AO maclen on reqsk

This extra check doesn't work for a handshake when SYN segment has
(current_key.maclen != rnext_key.maclen). It could be amended to
preserve rnext_key.maclen instead of current_key.maclen, but that
requires a lookup on listen socket.

Originally, this extra maclen check was introduced just because it was
cheap. Drop it and convert tcp_request_sock::maclen into boolean
tcp_request_sock::used_tcp_ao.

Fixes: 06b22ef29591 ("net/tcp: Wire TCP-AO to request sockets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/tcp: Don't add key with non-matching VRF on connected sockets

If the connection was established, don't allow adding TCP-AO keys that
don't match the peer. Currently, there are checks for ip-address
matching, but L3 index check is missing. Add it to restrict userspace
shooting itself somewhere.

Yet, nothing restricts the CAP_NET_RAW user from trying to shoot
themselves by performing setsockopt(SO_BINDTODEVICE) or
setsockopt(SO_BINDTOIFINDEX) over an established TCP-AO connection.
So, this is just "minimum effort" to potentially save someone's
debugging time, rather than a full restriction on doing weird things.

Fixes: 248411b8cb89 ("net/tcp: Wire up l3index to TCP-AO")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/tcp: Limit TCP_AO_REPAIR to non-listen sockets

Listen socket is not an established TCP connection, so
setsockopt(TCP_AO_REPAIR) doesn't have any impact.

Restrict this uAPI for listen sockets.

Fixes: faadfaba5e01 ("net/tcp: Add TCP_AO_REPAIR")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/tcp: Consistently align TCP-AO option in the header

Currently functions that pre-calculate TCP header options length use
unaligned TCP-AO header + MAC-length for skb reservation.
And the functions that actually write TCP-AO options into skb do align
the header. Nothing good can come out of this for ((maclen % 4) != 0).

Provide tcp_ao_len_aligned() helper and use it everywhere for TCP
header options space calculations.

Fixes: 1e03d32bea8e ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Documentation/tcp: Fix an obvious typo

Yep, my VIM spellchecker is not good enough for typos like this one.

Fixes: 7fe0e38bb669 ("Documentation/tcp: Add TCP-AO documentation")
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Closes: https://lore.kernel.org/all/2745ab4e-acac-40d4-83bf-37f2600d0c3d@web.de/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'there-are-some-bugfix-for-the-hns-ethernet-driver'

Jijie Shao says:

====================
There are some bugfix for the HNS ethernet driver

There are some bugfix for the HNS ethernet driver
---
changeLog:
v2 -> v3:
  - Refine the commit msg as Wojciech suggestions
  - Reconstruct the "hns_mac_link_anti_shake" function suggested by Wojciech
  v2: https://lore.kernel.org/all/20231204011051.4055031-1-shaojijie@huawei.com/
v1 -> v2:
  - Fixed the internal function is not decorated with static issue, suggested by Jakub
  v1: https://lore.kernel.org/all/20231201102703.4134592-1-shaojijie@huawei.com/
---
====================

Link: https://lore.kernel.org/r/20231204143232.3221542-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns: fix fake link up on xge port

If a xge port just connect with an optical module and no fiber,
it may have a fake link up because there may be interference on
the hardware. This patch adds an anti-shake to avoid the problem.
And the time of anti-shake is base on tests.

Fixes: b917078c1c10 ("net: hns: Add ACPI support to check SFP present")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns: fix wrong head when modify the tx feature when sending packets

Upon changing the tx feature, the hns driver will modify the
maybe_stop_tx() and fill_desc() functions, if the modify happens
during packet sending, will cause the hardware and software
pointers do not match, and the port can not work anymore.

This patch deletes the maybe_stop_tx() and fill_desc() functions
modification when setting tx feature, and use the skb_is_gro()
to determine which functions to use in the tx path.

Fixes: 38f616da1c28 ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: atlantic: Fix NULL dereference of skb pointer in

If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function,
then a timestamp is stored from a packet in a field of skb object,
which is not allocated at the moment of the call (skb == NULL).

Generalize aq_ptp_extract_ts and other affected functions so they don't
work with struct sk_buff*, but with struct skb_shared_hwtstamps*.

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 26efaef759a1 ("net: atlantic: Implement xdp data plane")
Signed-off-by: Daniil Maximov <daniil31415it@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

r8152: add vendor/device ID pair for ASUS USB-C2500

The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.

Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.

Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()

In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.

This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'ionic-small-driver-fixes'

Shannon Nelson says:

====================
ionic: small driver fixes

This is a pair of fixes to address a DIM issue and a
kernel test robot complaint

v1: https://lore.kernel.org/netdev/20231201000519.13363-1-shannon.nelson@amd.com/
====================

Link: https://lore.kernel.org/r/20231204192234.21017-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: Fix dim work handling in split interrupt mode

Currently ionic_dim_work() is incorrect when in
split interrupt mode. This is because the interrupt
rate is only being changed for the Rx side even for
dim running on Tx. Fix this by using the qcq from
the container_of macro. Also, introduce some local
variables for a bit of cleanup.

Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: fix snprintf format length warning

Our friendly kernel test robot has reminded us that with a new
check we have a warning about a potential string truncation.
In this case it really doesn't hurt anything, but it is worth
addressing especially since there really is no reason to reserve
so many bytes for our queue names. It seems that cutting the
queue name buffer length in half stops the complaint.

Fixes: c06107cabea3 ("ionic: more ionic name tweaks")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: fix mid stream window clamp.

After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.

Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.

To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.

When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.

Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bnxt: fix a potential use-after-free in bnxt_init_tc

When flow_indr_dev_register() fails, bnxt_init_tc will free
bp->tc_info through kfree(). However, the caller function
bnxt_init_one() will ignore this failure and call
bnxt_shutdown_tc() on failure of bnxt_dl_register(), where
a use-after-free happens. Fix this issue by setting
bp->tc_info to NULL after kfree().

Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: veth: fix packet segmentation in veth_convert_skb_to_xdp_buff

Based on the previous allocated packet, page_offset can be not null
in veth_convert_skb_to_xdp_buff routine.
Take into account page fragment offset during the skb paged area copy
in veth_convert_skb_to_xdp_buff().

Fixes: 2d0de67da51a ("net: veth: use newly added page pool API for veth with xdp")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero

In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and
ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if
blocks. If every single branch of the series of if statements exited, this
would be fine. However, the rx_coalesce_usecs is checked against zero to
print an informative message if use_adaptive_rx_coalesce is enabled. If
this check is true, it short circuits the entire chain of statements,
preventing validation of the tx_coalesce_usecs field.

Indeed, since commit e792779e6b63 ("iavf: Prevent changing static ITR
values if adaptive moderation is on") the iavf driver actually rejects any
change to the tx_coalesce_usecs or rx_coalesce_usecs when
use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making
this checking a bit redundant.

Fix this error by removing the unnecessary and redundant checks for
use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a
valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields
are already unsigned, remove the minimum value check. This allows assigning
an ITR value ranging from 0-8160 as described by the printed message.

Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: Fix unexpected MFS warning message

Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added
a warning message that reports unexpected size of port's MFS (max
frame size) value. This message use for the port number local
variable 'i' that is wrong.
In i40e_probe() this 'i' variable is used only to iterate VSIs
to find FDIR VSI:

<code>
...
/* if FDIR VSI was set up, start it now */
        for (i = 0; i < pf->num_alloc_vsi; i++) {
                if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
                        i40e_vsi_open(pf->vsi[i]);
                        break;
                }
        }
...
</code>

So the warning message use for the port number index of FDIR VSI
if this exists or pf->num_alloc_vsi if not.

Fix the message by using 'pf->hw.port' for the port number.

Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Restore fix disabling RX VLAN filtering

Fix setting dis_rx_filtering depending on whether port vlan is being
turned on or off. This was originally fixed in commit c793f8ea15e3 ("ice:
Fix disabling Rx VLAN filtering with port VLAN enabled"), but while
refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the
fix along with the original comment from that change.

Also delete duplicate lines in ice_port_vlan_on().

Fixes: 2946204b3fa8 ("ice: implement bridge port vlan")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: change vfs.num_msix_per to vf->num_msix

vfs::num_msix_per should be only used as default value for
vf->num_msix. For other use cases vf->num_msix should be used, as VF can
have different MSI-X amount values.

Fix incorrect register index calculation. vfs::num_msix_per and
pf->sriov_base_vector shouldn't be used after implementation of changing
MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it
is storing value for first irq index.

Fixes: fe1c5ca2fe76 ("ice: implement num_msix field per VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

octeontx2-af: fix a use-after-free in rvu_npa_register_reporters

The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl)
after the create_workqueue fails, and after that free, the rvu_dl will
be translate back through rvu_npa_health_reporters_create,
rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the
err_dl_health label, being freed again in
rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy.
In the second calls of rvu_npa_health_reporters_destroy, however,
it uses rvu_dl->rvu_npa_health_reporter, which is already freed at
the end of rvu_npa_health_reporters_destroy in the first call.

So this patch prevents the first destroy by instantly returning -ENONMEN
when create_workqueue fails. In addition, since the failure of
create_workqueue is the only entrence of label err, it has been
integrated into the error-handling path of create_workqueue.

Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

xsk: Skip polling event check for unbound socket

In xsk_poll(), checking available events and setting mask bits should
be executed only when a socket has been bound. Setting mask bits for
unbound socket is meaningless.

Currently, it checks events even when xsk_check_common() failed.
To prevent this, we move goto location (skip_tx) after that checking.

Fixes: 1596dae2f17e ("xsk: check IFF_UP earlier in Tx path")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231201061048.GA1510@libra05

net: stmmac: fix FPE events losing

The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
handler missing FPE event status and leads to FPE handshaking failure and
retries.
To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
MAC_FPE_CTRL_STS in those methods.

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jianheng Zhang <Jianheng.Zhang@synopsys.com>
Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-pf: consider both Rx and Tx packet stats for adaptive interrupt coalescing

The current adaptive interrupt coalescing code updates only rx
packet stats for dim algorithm. This patch also updates tx packet
stats which will be useful when there is only tx traffic.
Also moved configuring hardware adaptive interrupt setting to
driver dim callback.

Fixes: 6e144b47f560 ("octeontx2-pf: Add support for adaptive interrupt coalescing")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231201053330.3903694-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

arcnet: restoring support for multiple Sohard Arcnet cards

Probe of Sohard Arcnet cards fails,
if 2 or more cards are installed in a system.
See kernel log:
[    2.759203] arcnet: arcnet loaded
[    2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.)
[    2.770585] arcnet:com20020_pci: COM20020 PCI support
[    2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003)
[    2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[    3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101.
[    3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[    3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003)
[    3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[    3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision
[    3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision
[    3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35.
[    3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[    3.370608] com20020: probe of 0000:07:00.0 failed with error -5

commit 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
changes the device name of all COM20020 based PCI cards,
even if only some cards support this:
snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);

The error happens because all Sohard Arcnet cards would be called arc0-0,
since the Sohard Arcnet cards don't have a PLX rotary coder.
I.e. EAE Arcnet cards have a PLX rotary coder,
which sets the first decimal, ensuring unique devices names.

This patch adds two new card feature flags to indicate
which cards support LEDs and the PLX rotary coder.
For EAE based cards the names still depend on the PLX rotary coder
(untested, since missing EAE hardware).
For Sohard based cards, this patch will result in devices
being called arc0, arc1, ... (tested).

Signed-off-by: Thomas Reichinger <thomas.reichinger@sohard.de>
Fixes: 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

packet: Move reference count in packet_sock to atomic_long_t

In some potential instances the reference count on struct packet_sock
could be saturated and cause overflows which gets the kernel a bit
confused. To prevent this, move to a 64-bit atomic reference count on
64-bit architectures to prevent the possibility of this type to overflow.

Because we can not handle saturation, using refcount_t is not possible
in this place. Maybe someday in the future if it changes it could be
used. Also, instead of using plain atomic64_t, use atomic_long_t instead.
32-bit machines tend to be memory-limited (i.e. anything that increases
a reference uses so much memory that you can't actually get to 2**32
references). 32-bit architectures also tend to have serious problems
with 64-bit atomics. Hence, atomic_long_t is the more natural solution.

Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231201131021.19999-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-linus-iommufd' of git://git./linux/kernel/git/jgg/iommufd

Pull iommufd fixes from Jason Gunthorpe:

- A small fix for the dirty tracking self test to fail correctly if the
   code is buggy

- Fix a tricky syzkaller race UAF with object reference counting

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Do not UAF during iommufd_put_object()
  iommufd: Add iommufd_ctx to iommufd_put_object()
  iommufd/selftest: Fix _test_mock_dirty_bitmaps()

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull vdpa fixes from Michael Tsirkin:
"Fixes in mlx5 and pds drivers"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  pds_vdpa: set features order
  pds_vdpa: clear config callback when status goes to 0
  pds_vdpa: fix up format-truncation complaint
  vdpa/mlx5: preserve CVQ vringh index

platform/mellanox: Check devm_hwmon_device_register_with_groups() return value

devm_hwmon_device_register_with_groups() returns an error pointer upon
failure. Check its return value for errors.

Compile-tested only.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/mellanox: Add null pointer checks for devm_kasprintf()

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Compile-tested only.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

mlxbf-bootctl: correctly identify secure boot with development keys

The secure boot state of the BlueField SoC is represented by two bits:
                0 = production state
                1 = secure boot enabled
                2 = non-secure (secure boot disabled)
                3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).

The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.

Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.

Fixes: 79e29cb8fbc5c ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

regmap: fix bogus error on regcache_sync success

Since commit 0ec7731655de ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:

[ 228.794676] pcm512x 1-004c: Failed to sync cache: -22
[ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22

This is caused by the cache check result leaking out into the
regcache_sync return value.

Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.

Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_aldps_en().

Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().

Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in
r8156b_wait_loading_flash().

Fixes: 195aae321c82 ("r8152: support new chips")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: Add RTL8152_INACCESSIBLE checks to more loops

Previous commits added checks for RTL8152_INACCESSIBLE in the loops in
the driver. There are still a few more that keep tripping the driver
up in error cases and make things take longer than they should. Add
those in.

All the loops that are part of this commit existed in some form or
another since the r8152 driver was first introduced, though
RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit
715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE")

Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: Hold the rtnl_lock for all of reset

As of commit d9962b0d4202 ("r8152: Block future register access if
register access fails") there is a race condition that can happen
between the USB device reset thread and napi_enable() (not) getting
called during rtl8152_open(). Specifically:
* While rtl8152_open() is running we get a register access error
  that's _not_ -ENODEV and queue up a USB reset.
* rtl8152_open() exits before calling napi_enable() due to any reason
  (including usb_submit_urb() returning an error).

In that case:
* Since the USB reset is perform in a separate thread asynchronously,
  it can run at anytime USB device lock is not held - even before
  rtl8152_open() has exited with an error and caused __dev_open() to
  clear the __LINK_STATE_START bit.
* The rtl8152_pre_reset() will notice that the netif_running() returns
  true (since __LINK_STATE_START wasn't cleared) so it won't exit
  early.
* rtl8152_pre_reset() will then hang in napi_disable() because
  napi_enable() was never called.

We can fix the race by making sure that the r8152 reset routines don't
run at the same time as we're opening the device. Specifically we need
the reset routines in their entirety rely on the return value of
netif_running(). The only way to reliably depend on that is for them
to hold the rntl_lock() mutex for the duration of reset.

Grabbing the rntl_lock() mutex for the duration of reset seems like a
long time, but reset is not expected to be common and the rtnl_lock()
mutex is already held for long durations since the core grabs it
around the open/close calls.

Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 6.7-rc4

Merge tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- Two fallocate fixes

- Fix warnings from new gcc

- Two symlink fixes

* tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client, common: fix fortify warnings
  cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved
  cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved
  smb: client: report correct st_size for SMB and NFS symlinks
  smb: client: fix missing mode bits for SMB symlinks

Merge tag 'firewire-fixes-6.7-rc4' of git://git./linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
"A single patch to fix long-standing issue of memory leak at failure of
  device registration for fw_unit. We rarely encounter the issue, but it
  should be applied to stable releases, since it fixes inappropriate API
  usage"

* tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: fix possible memory leak in create_units()

Merge tag 'powerpc-6.7-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix corruption of f0/vs0 during FP/Vector save, seen as userspace
   crashes when using io-uring workers (in particular with MariaDB)

- Fix KVM_RUN potentially clobbering all host userspace FP/Vector
   registers

Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin.

* tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers
  powerpc: Don't clobber f0/vs0 during fp|altivec register save

Merge tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio

Pull vfio fixes from Alex Williamson:

- Fix the lifecycle of a mutex in the pds variant driver such that a
   reset prior to opening the device won't find it uninitialized.
   Implement the release path to symmetrically destroy the mutex. Also
   switch a different lock from spinlock to mutex as the code path has
   the potential to sleep and doesn't need the spinlock context
   otherwise (Brett Creeley)

- Fix an issue detected via randconfig where KVM tries to symbol_get an
   undeclared function. The symbol is temporarily declared
   unconditionally here, which resolves the problem and avoids churn
   relative to a series pending for the next merge window which resolves
   some of this symbol ugliness, but also fixes Kconfig dependencies
   (Sean Christopherson)

* tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio:
  vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart
  vfio/pds: Fix possible sleep while in atomic context
  vfio/pds: Fix mutex lock->magic != lock warning

Merge tag 'for-linus-6.7a-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- A fix for the Xen event driver setting the correct return value when
   experiencing an allocation failure

- A fix for allocating space for a struct in the percpu area to not
   cross page boundaries (this one is for x86, a similar one for Arm was
   already in the pull request for rc3)

* tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: fix error code in xen_bind_pirq_msi_to_irq()
  x86/xen: fix percpu vcpu_info allocation

Merge tag 'probes-fixes-v6.7-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

- objpool: Fix objpool overrun case on memory/cache access delay
   especially on the big.LITTLE SoC. The objpool uses a copy of object
   slot index internal loop, but the slot index can be changed on
   another processor in parallel. In that case, the difference of 'head'
   local copy and the 'slot->last' index will be bigger than local slot
   size. In that case, we need to re-read the slot::head to update it.

- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
   kretprobe_holder::rp is RCU managed, it should use
   rcu_assign_pointer() and rcu_dereference_check() correctly. Also
   adding __rcu tag for finding wrong usage by sparse.

- rethook: Fix to use appropriate rcu API for rethook::handler. The
   same as kretprobe, rethook::handler is RCU managed and it should use
   rcu_assign_pointer() and rcu_dereference_check(). This also adds
   __rcu tag for finding wrong usage by sparse.

* tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rethook: Use __rcu pointer for rethook::handler
  kprobes: consistent rcu api usage for kretprobe holder
  lib: objpool: fix head overrun on RK3588 SBC

r8169: fix rtl8125b PAUSE frames blasting when suspended

When FIFO reaches near full state, device will issue pause frame.
If pause slot is enabled(set to 1), in this time, device will issue
pause frame only once. But if pause slot is disabled(set to 0), device
will keep sending pause frames until FIFO reaches near empty state.

When pause slot is disabled, if there is no one to handle receive
packets, device FIFO will reach near full state and keep sending
pause frames. That will impact entire local area network.

This issue can be reproduced in Chromebox (not Chromebook) in
developer mode running a test image (and v5.10 kernel):
1) ping -f $CHROMEBOX (from workstation on same local network)
2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX
3) ping $ROUTER (wait until ping fails from workstation)

Takes about ~20-30 seconds after step 2 for the local network to
stop working.

Fix this issue by enabling pause slot to only send pause frame once
when FIFO reaches near full state.

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

hv_netvsc: rndis_filter needs to select NLS

rndis_filter uses utf8s_to_utf16s() which is provided by setting
NLS, so select NLS to fix the build error:

ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined!

Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/tg3: fix race condition in tg3_reset_task()

When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:

   enum {
      /* I/O channel is in normal state */
      pci_channel_io_normal = (__force pci_channel_state_t) 1,

      /* I/O to channel is blocked */
      pci_channel_io_frozen = (__force pci_channel_state_t) 2,

      /* PCI card is dead */
      pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
   };

If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.

EEH driver gets error event
--> eeh_set_channel_state()
    and set device to one of
    error state above           scheduler: tg3_reset_task() get
                                returned error from tg3_init_hw()
                             --> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device

To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state.  (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.

Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.

Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'pm-6.7-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix issues in two cpufreq drivers, in the AMD P-state driver and
  in the power-capping DTPM framework.

  Specifics:

   - Fix the AMD P-state driver's EPP sysfs interface in the cases when
     the performance governor is in use (Ayush Jain)

   - Make the ->fast_switch() callback in the AMD P-state driver return
     the target frequency as expected (Gautham R. Shenoy)

   - Allow user space to control the range of frequencies to use via
     scaling_min_freq and scaling_max_freq when AMD P-state driver is in
     use (Wyes Karny)

   - Prevent power domains needed for wakeup signaling from being turned
     off during system suspend on Qualcomm systems and prevent
     performance states votes from runtime-suspended devices from being
     lost across a system suspend-resume cycle in qcom-cpufreq-nvmem
     (Stephan Gerhold)

   - Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
     i.MX6ULL types that can run at that frequency (Christoph
     Niedermaier)

   - Eliminate unnecessary and harmful conversions to uW from the DTPM
     (dynamic thermal and power management) framework (Lukasz Luba)"

* tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/amd-pstate: Only print supported EPP values for performance governor
  cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update
  powercap: DTPM: Fix unneeded conversions to micro-Watts
  cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()
  pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
  cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
  cpufreq: qcom-nvmem: Enable virtual power domain devices
  cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily

Merge tag 'acpi-6.7-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"This fixes a recently introduced build issue on ARM32 and a NULL
  pointer dereference in the ACPI backlight driver due to a design issue
  exposed by a recent change in the ACPI bus type code.

  Specifics:

   - Fix a recently introduced build issue on ARM32 platforms caused by
     an inadvertent header file breakage (Dave Jiang)

   - Eliminate questionable usage of acpi_driver_data() in the ACPI
     backlight cooling device code that leads to NULL pointer
     dereferences after recent ACPI core changes (Hans de Goede)"

* tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Use acpi_video_device for cooling-dev driver data
  ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
"Fix a regression where the arm64 KPTI ends up enabled even on systems
that don't need it"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Avoid enabling KPTI unnecessarily

Merge tag 'iommu-fixes-v6.7-rc3' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Fix race conditions in device probe path

- Handle ERR_PTR() returns in __iommu_domain_alloc() path

- Update MAINTAINERS entry for Qualcom IOMMUs

- Printk argument fix in device tree specific code

- Several Intel VT-d fixes from Lu Baolu:
     - Do not support enforcing cache coherency for non-empty domains
     - Avoid devTLB invalidation if iommu is off
     - Disable PCI ATS in legacy passthrough mode
     - Support non-PCI devices when clearing context
     - Fix incorrect cache invalidation for mm notification
     - Add MTL to quirk list to skip TE disabling
     - Set variable intel_dirty_ops to static

* tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix printk arg in of_iommu_get_resv_regions()
  iommu/vt-d: Set variable intel_dirty_ops to static
  iommu/vt-d: Fix incorrect cache invalidation for mm notification
  iommu/vt-d: Add MTL to quirk list to skip TE disabling
  iommu/vt-d: Make context clearing consistent with context mapping
  iommu/vt-d: Disable PCI ATS in legacy passthrough mode
  iommu/vt-d: Omit devTLB invalidation requests when TES=0
  iommu/vt-d: Support enforce_cache_coherency only for empty domains
  iommu: Avoid more races around device probe
  MAINTAINERS: list all Qualcomm IOMMU drivers in the QUALCOMM IOMMU entry
  iommu: Flow ERR_PTR out from __iommu_domain_alloc()

bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4

Bpf cpu=v4 support is introduced in [1] and Commit 4cd58e9af8b9
("bpf: Support new 32bit offset jmp instruction") added support for new
32bit offset jmp instruction. Unfortunately, in function
bpf_adj_delta_to_off(), for new branch insn with 32bit offset, the offset
(plus/minor a small delta) compares to 16-bit offset bound
[S16_MIN, S16_MAX], which caused the following verification failure:
  $ ./test_progs-cpuv4 -t verif_scale_pyperf180
  ...
  insn 10 cannot be patched due to 16-bit range
  ...
  libbpf: failed to load object 'pyperf180.bpf.o'
  scale_test:FAIL:expect_success unexpected error: -12 (errno 12)
  #405     verif_scale_pyperf180:FAIL

Note that due to recent llvm18 development, the patch [2] (already applied
in bpf-next) needs to be applied to bpf tree for testing purpose.

The fix is rather simple. For 32bit offset branch insn, the adjusted
offset compares to [S32_MIN, S32_MAX] and then verification succeeded.

  [1] https://lore.kernel.org/all/20230728011143.3710005-1-yonghong.song@linux.dev
  [2] https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev

Fixes: 4cd58e9af8b9 ("bpf: Support new 32bit offset jmp instruction")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231201024640.3417057-1-yonghong.song@linux.dev

Merge tag 'sound-6.7-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"No surprise here, including only a collection of HD-audio
  device-specific small fixes"

* tag 'sound-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Disable power-save on KONTRON SinglePC
  ALSA: hda/realtek: Add supported ALC257 for ChromeOS
  ALSA: hda/realtek: Headset Mic VREF to 100%
  ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format
  ALSA: hda: cs35l56: Enable low-power hibernation mode on SPI
  ALSA: cs35l41: Fix for old systems which do not support command
  ALSA: hda: cs35l41: Remove unnecessary boolean state variable firmware_running
  ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro