Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', 'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next

 - Support qcom SM8150/SM8250 video and display clks
 - Change how qcom's display port clks work

* clk-ingenic:
  clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
  clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
  clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
  clk: ingenic: Use readl_poll_timeout instead of custom loop
  clk: ingenic: Use to_clk_info() macro for all clocks

* clk-at91:
  clk: at91: sam9x60: support only two programmable clocks
  clk: at91: clk-sam9x60-pll: remove unused variable
  clk: at91: clk-main: update key before writing AT91_CKGR_MOR
  clk: at91: remove the checking of parent_name

* clk-kconfig:
  clk: Restrict CLK_HSDK to ARC_SOC_HSDK

* clk-imx:
  clk: imx8mq: Fix usdhc parents order
  clk: imx: imx21: Remove clock driver
  clk: imx: gate2: Fix a few typos
  clk: imx: Fix and update kerneldoc
  clk: imx: fix i.MX7D peripheral clk mux flags
  clk: imx: fix composite peripheral flags
  clk: imx: Correct the memrepair clock on imx8mp
  clk: imx: Correct the root clk of media ldb on imx8mp
  clk: imx: vf610: Add CRC clock
  clk: imx: Explicitly include bits.h
  clk: imx8qxp: Support building i.MX8QXP clock driver as module
  clk: imx8m: Support module build
  clk: imx: Add clock configuration for ARMv7 platforms
  clk: imx: Support building i.MX common clock driver as module
  clk: composite: Export clk_hw_register_composite()
  clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits

* clk-qcom:
  clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
  clk: qcom: Add display clock controller driver for SM8150 and SM8250
  dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings
  clk: qcom: add video clock controller driver for SM8250
  clk: qcom: add video clock controller driver for SM8150
  dt-bindings: clock: add SM8250 QCOM video clock bindings
  dt-bindings: clock: add SM8150 QCOM video clock bindings
  dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc
  clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs
  clk/qcom: fix spelling typo
  clk: qcom: gcc-sdm660: Fix wrong parent_map
  clk: qcom: dispcc: Update DP clk ops for phy design
  clk: qcom: gcc-msm8939: remove defined but not used variables
  clk: qcom: ipq8074: make pcie0_rchng_clk_src static

* clk-prima2:
  clk: clk-prima2: fix return value check in prima2_clk_init()

* clk-bcm:
  clk: bcm2835: add missing release if devm_clk_hw_register fails
  clk: bcm: rpi: Add register to control pixel bvb clk

Merge branches 'clk-semicolon', 'clk-axi-clkgen', 'clk-qoriq', 'clk-baikal', 'clk-const' and 'clk-mmp2' into clk-next

* clk-semicolon:
  clk: meson: use semicolons rather than commas to separate statements
  clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statements
  clk: uniphier: use semicolons rather than commas to separate statements

* clk-axi-clkgen:
  clk: axi-clkgen: Set power bits for fractional mode
  clk: axi-clkgen: Add support for fractional dividers

* clk-qoriq:
  clk: qoriq: modify MAX_PLL_DIV to 32

* clk-baikal:
  clk: baikal-t1: Mark Ethernet PLL as critical

* clk-const:
  clk: pxa: Constify static struct clk_ops

* clk-mmp2:
  clk: mmp2: Fix the display clock divider base

Merge branches 'clk-simplify', 'clk-ti', 'clk-tegra', 'clk-rockchip' and 'clk-mediatek' into clk-next

 - Small non-critical fixes for TI clk driver
 - Support Mediatek MT8167 clks

* clk-simplify:
  clk: mediatek: fix platform_no_drv_owner.cocci warnings
  clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init
  clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init

* clk-ti:
  clk: ti: dra7: add missing clkctrl register for SHA2 instance
  clk: ti: clockdomain: fix static checker warning
  clk: ti: autoidle: add checks against NULL pointer reference
  clk: keystone: sci-clk: add 10% slack to set_rate
  clk: keystone: sci-clk: cache results of last query rate operation
  clk: keystone: sci-clk: fix parsing assigned-clock data during probe

* clk-tegra:
  clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate()

* clk-rockchip:
  clk: rockchip: Initialize hw to error to avoid undefined behavior
  clk: rockchip: rk3399: Support module build
  clk: rockchip: fix the clk config to support module build
  clk: rockchip: Export some clock common APIs for module drivers
  clk: rockchip: Export rockchip_register_softrst()
  clk: rockchip: Export rockchip_clk_register_ddrclk()
  clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls
  clk: rockchip: rk3308: drop unused mux_timer_src_p

* clk-mediatek:
  clk: mediatek: Add MT8167 clock support
  dt-bindings: clock: mediatek: add bindings for MT8167 clocks
  clk: mediatek: add UART0 clock support

Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner', 'clk-samsung', 'clk-doc' and 'clk-unused' into clk-next

 - Remove various unused variables in clk drivers

* clk-renesas:
  clk: renesas: rcar-gen3: Update description for RZ/G2
  clk: renesas: cpg-mssr: Add support for R-Car V3U
  clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv
  clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag
  dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0
  dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions
  dt-bindings: power: Add r8a779a0 SYSC power domain definitions
  clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r)
  clk: renesas: r8a7742: Add clk entry for VSPR

* clk-amlogic:
  clk: meson: make shipped controller configurable
  clk: meson: g12a: mark fclk_div2 as critical
  clk: meson: axg-audio: fix g12a tdmout sclk inverter
  clk: meson: axg-audio: separate axg and g12a regmap tables
  clk: meson: add sclk-ws driver

* clk-allwinner:
  clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL
  clk: sunxi-ng: add support for the Allwinner A100 CCU
  dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU

* clk-samsung:
  clk: s2mps11: initialize driver via module_platform_driver
  clk: samsung: Use cached clk_hws instead of __clk_lookup() calls
  clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions
  clk: samsung: Add clk ID definitions for the CPU parent clocks
  clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks
  clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d
  clk: samsung: Keep top BPLL mux on Exynos542x enabled

* clk-doc:
  clk: davinci: add missing kerneldoc
  clk: fixed: add missing kerneldoc

* clk-unused:
  clk: socfpga: agilex: Remove unused variable 'cntr_mux'
  clk: si5341: drop unused 'err' variable
  clk: mmp: pxa1928: drop unused 'clk' variable
  clk: at91: drop unused at91sam9g45_pcr_layout

clk: imx8mq: Fix usdhc parents order

According to the latest RM (see Table 5-1. Clock Root Table),
both usdhc root clocks have the parent order as follows:

000 - 25M_REF_CLK
001 - SYSTEM_PLL1_DIV2
010 - SYSTEM_PLL1_CLK
011 - SYSTEM_PLL2_DIV2
100 - SYSTEM_PLL3_CLK
101 - SYSTEM_PLL1_DIV3
110 - AUDIO_PLL2_CLK
111 - SYSTEM_PLL1_DIV8

So the audio_pll2_out and sys3_pll_out have to be swapped.

Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: Cosmin Stefan Stoica <cosmin.stoica@nxp.com>
Link: https://lore.kernel.org/r/1602753944-30757-1-git-send-email-abel.vesa@nxp.com
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on

If the GDSC is enabled out of boot but doesn't have the retain ff bit
set we will get confusing results where the registers that are powered
by the GDSC lose their contents on the first power off of the GDSC but
thereafter they retain their contents. This is because gdsc_init() fails
to make sure the RETAIN_FF bit is set when it probes the GDSC the first
time and thus powering off the GDSC causes the register contents to be
reset. We do set the RETAIN_FF bit the next time we power on the GDSC,
see gdsc_enable(), so that subsequent GDSC power off's don't lose
register contents state.

Forcibly set the bit at device probe time so that the kernel's assumed
view of the GDSC is consistent with the state of the hardware. This
fixes a problem where the audio PLL doesn't work on sc7180 when the
bootloader leaves the lpass_core_hm GDSC enabled at boot (e.g. to make a
noise) but critically doesn't set the RETAIN_FF bit.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <tdas@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201017020137.1251319-1-sboyd@kernel.org
Reviewed-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org>

clk: Restrict CLK_HSDK to ARC_SOC_HSDK

The HSDK PLL driver is only useful when building for an ARC HSDK
platform.
As ARC selects OF, the dependency on OF can just be replaced by a
dependency on ARC_SOC_HSDK.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200807094351.1046-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: sam9x60: support only two programmable clocks

According to datasheet (Chapter 29.16.13, PMC Programmable Clock Register)
there are only two programmable clocks on SAM9X60.

Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1602686072-28296-1-git-send-email-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate

Clocks that don't have a divider are in our case all marked with the
CLK_SET_RATE_PARENT flag. In this case, the .round_rate implementation
should modify the value pointed to by parent_rate, in order to propagate
the rate change to the parent, as explained in the documentation of
clk_set_rate().

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-5-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT

The custom clocks have custom functions to round, get or set their rate.
Therefore, we can't assume that they need the CLK_SET_RATE_PARENT flag.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-4-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL

CLK_SET_RATE_GATE means that the clock must be gated when being
reclocked. This is not the case for the PLLs in Ingenic SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-3-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ingenic: Use readl_poll_timeout instead of custom loop

Use the readl_poll_timeout() function instead of rolling our own
busy-wait loops. This makes the code simpler.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-2-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ingenic: Use to_clk_info() macro for all clocks

The to_clk_info() previously had a BUG_ON() to check that it was only
called for PLL clocks. Yet, all the other clocks were doing the exact
same thing the macro does, in-line.

Move the to_clk_info() macro to the top of the file, remove the
hardcoded BUG_ON(), and use it everywhere it makes sense.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm2835: add missing release if devm_clk_hw_register fails

In the implementation of bcm2835_register_pll(), the allocated pll is
leaked if devm_clk_hw_register() fails to register hw. Release pll if
devm_clk_hw_register() fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: clk-sam9x60-pll: remove unused variable

Fix variable set but not used compilation warning.

Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1598338751-20607-4-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: clk-main: update key before writing AT91_CKGR_MOR

SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator
Main Oscillator Register) that writing any value other than
0x37 on KEY field aborts the write operation. Use the key when
selecting main clock parent.

Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1598338751-20607-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: remove the checking of parent_name

There is no need to check parent_name variable while assigning it to
init.parent_names. parent_name variable is already checked at
the beginning of at91_clk_register_peripheral() function.

Fixes: 6114067e437eb ("clk: at91: add PMC peripheral clocks")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1598338751-20607-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: clk-prima2: fix return value check in prima2_clk_init()

In case of error, the function clk_register() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200921034522.9077-1-vulab@iscas.ac.cn
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp2: Fix the display clock divider base

The LCD clock dividers are apparently based on one. No datasheet,
determined empirically, but seems to be confirmed by line 19 of lcd.fth in
OLPC laptop's Open Firmware [1]:

   h# 00000700 value pmua-disp-clk-sel  \ PLL1 / 7 -> 113.86 MHz

[1] https://raw.githubusercontent.com/quozl/openfirmware/65a08a73b2cac/cpu/arm/olpc/lcd.fth

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200925233914.227786-1-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: pxa: Constify static struct clk_ops

Constify a couple of static struct clk_ops that are not modified. Their
only usage is inside the macros and their address is passed to
clk_register_composite() which takes pointers to const struct clk_ops.
This allows the compiler to put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200922184715.1854-1-rikard.falkeborn@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: baikal-t1: Mark Ethernet PLL as critical

We've discovered that disabling the so called Ethernet PLL causes reset of
the devices consuming its outgoing clock. The resets happen automatically
even if each underlying clock gate is turned off. Due to that we can't
disable the Ethernet PLL until the kernel is prepared for the corresponding
resets. So for now just mark the PLL clock provider as critical.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200920110335.18034-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qoriq: modify MAX_PLL_DIV to 32

On LS2088A, Watchdog need clk divided by 32,
so modify MAX_PLL_DIV to 32

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Link: https://lore.kernel.org/r/20200916030311.17280-1-qiang.zhao@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: axi-clkgen: Set power bits for fractional mode

Using the fractional dividers requires some additional power bits to be
set.

The fractional power bits are not documented and the current heuristic
for setting them seems be insufficient for some cases. Just always set all
the fractional power bits when in fractional mode.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001085948.21412-2-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: axi-clkgen: Add support for fractional dividers

The axi-clkgen has (optional) fractional dividers on the output clock
divider and feedback clock divider path. Utilizing the fractional dividers
allows for a better resolution of the output clock, being able to
synthesize more frequencies.

Rework the driver support to support the fractional register fields, both
for setting a new rate as well as reading back the current rate from the
hardware.

For setting the rate if no perfect divider settings were found in
non-fractional mode try again in fractional mode and see if better settings
can be found. This appears to be the recommended mode of operation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001085948.21412-1-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add display clock controller driver for SM8150 and SM8250

Add support for the display clock controller found on SM8150 and SM8250.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Link: https://lore.kernel.org/r/20200927190653.13876-3-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings

Add device tree bindings for display clock controller for
Qualcomm Technology Inc's SM8150 and SM8250 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Link: https://lore.kernel.org/r/20200927190653.13876-2-jonathan@marek.ca
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: add video clock controller driver for SM8250

Add support for the video clock controller found on SM8250 based devices.

Derived from the downstream driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200923160635.28370-6-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: add video clock controller driver for SM8150

Add support for the video clock controller found on SM8150 based devices.

Derived from the downstream driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200923160635.28370-5-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: add SM8250 QCOM video clock bindings

Add device tree bindings for video clock controller for SM8250 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200923160635.28370-4-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: add SM8150 QCOM video clock bindings

Add device tree bindings for video clock controller for SM8150 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200923160635.28370-3-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc

These two bindings are almost identical, so combine them into one. This
will make it easier to add the sm8150 and sm8250 videocc bindings.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200923160635.28370-2-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs

This change adds GDSCs, resets and most of the missing
clocks to the msm8994 GCC driver. The remaining ones
are of local_vote_clk and gate_clk type, which are not
yet supported upstream. Also reorder them to match the
original downstream driver.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005145855.149206-1-konradybcio@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: meson: use semicolons rather than commas to separate statements

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1601233948-11629-11-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statements

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1601233948-11629-10-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: uniphier: use semicolons rather than commas to separate statements

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1601233948-11629-2-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk/qcom: fix spelling typo

Modify the comment typo: "compliment" -> "complement".

Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1600930506-394-1-git-send-email-wangqing@vivo.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8167 clock support

Add the following clock support for MT8167 SoC: topckgen, apmixedsys,
infracfg, audsys, imgsys, mfgcfg, vdecsys.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20200918132303.2831815-2-fparent@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: add bindings for MT8167 clocks

Add binding documentation for topckgen, apmixedsys, infracfg, audsys,
imgsys, mfgcfg, vdecsys on MT8167 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200918132303.2831815-1-fparent@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: add UART0 clock support

Add MT6779 UART0 clock support.

Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support")
Signed-off-by: Wendell Lin <wendell.lin@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: rockchip: Initialize hw to error to avoid undefined behavior

We can get down to this return value from ERR_CAST() without
initializing hw. Set it to -ENOMEM so that we always return something
sane.

Fixes the following smatch warning:

drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() error: uninitialized symbol 'hw'.
drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() warn: passing zero to 'ERR_CAST'

Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Fixes: 956060a52795 ("clk: rockchip: add support for half divider")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'v5.10-rockchip-clk1' of git://git./linux/kernel/git/mmind/linux-rockchip into clk-rockchip

Pull Rockchip clk driver updates from Heiko Stuebner:

Ability to build the clock driver as module and removal
of an unused parent-names struct.

* tag 'v5.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: rk3399: Support module build
  clk: rockchip: fix the clk config to support module build
  clk: rockchip: Export some clock common APIs for module drivers
  clk: rockchip: Export rockchip_register_softrst()
  clk: rockchip: Export rockchip_clk_register_ddrclk()
  clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls
  clk: rockchip: rk3308: drop unused mux_timer_src_p

clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate()

The provider variable is already dereferenced earlier in this function.
Drop the check for NULL as it is impossible.

Found with smatch

drivers/clk/tegra/clk-tegra210-emc.c:131 tegra210_clk_emc_set_rate() warn: variable dereferenced before check 'provider' (see line 124)

Cc: Joseph Lo <josephl@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Fixes: 0ac65fc946d3 ("clk: tegra: Implement Tegra210 EMC clock")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200922191641.2305144-1-sboyd@kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>

clk: ti: dra7: add missing clkctrl register for SHA2 instance

DRA7 SoC has two SHA instances. Add the clkctrl entry for the second
one.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907082600.454-4-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ti: clockdomain: fix static checker warning

Fix a memory leak induced by not calling clk_put after doing of_clk_get.

Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907082600.454-3-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ti: autoidle: add checks against NULL pointer reference

The clk pointer passed to omap2_clk_(deny|allow)_idle can be NULL, so
add checks for this.

Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907082600.454-2-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: keystone: sci-clk: add 10% slack to set_rate

Currently, we request exact clock rates from the firmware to be set with
set_rate. Due to some rounding errors and internal functionality of the
firmware itself, this can fail. Thus, add some slack to the set_rate
functionality so that we are always guaranteed to pass. The firmware
always attempts to use frequency as close to the target freq as
possible despite the slack given here.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907085740.1083-4-t-kristo@ti.com
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: keystone: sci-clk: cache results of last query rate operation

Cache results of the latest query rate operation. This optimizes the
firmware interface a bit, avoiding unnecessary calls to firmware if we
know the result already; the firmware interface is pretty expensive
to use for query rate functionality.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907085740.1083-3-t-kristo@ti.com
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: keystone: sci-clk: fix parsing assigned-clock data during probe

The DT clock probe loop incorrectly terminates after processing "clocks"
only, fix this by re-starting the loop when all entries for current
DT property have been parsed.

Fixes: 8e48b33f9def ("clk: keystone: sci-clk: probe clocks from DT instead of firmware")
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907085740.1083-2-t-kristo@ti.com
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: fix platform_no_drv_owner.cocci warnings

./drivers/clk/mediatek/clk-mt6765.c:912:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Fixes: 1aca9939bf72 ("clk: mediatek: Add MT6765 clock support")
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1600761065-71353-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init

Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20200921082426.2591042-1-liushixin2@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init

Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20200921082425.2590990-1-liushixin2@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: agilex: Remove unused variable 'cntr_mux'

drivers/clk/socfpga/clk-agilex.c:24:37: warning: ‘cntr_mux’ defined but not used [-Wunused-const-variable=]
 static const struct clk_parent_data cntr_mux[] = {
                                     ^~~~~~~~

There is no caller in tree, so can remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200915020950.4688-1-yuehaibing@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: si5341: drop unused 'err' variable

'err' is assigned but never read:

  /drivers/clk/clk-si5341.c: In function ‘si5341_output_get_parent’:
  drivers/clk/clk-si5341.c:886:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916161740.14173-5-krzk@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mmp: pxa1928: drop unused 'clk' variable

'clk' is assigned but never read:

  drivers/clk/mmp/clk-of-pxa1928.c: In function ‘pxa1928_pll_init’:
  drivers/clk/mmp/clk-of-pxa1928.c:71:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916161740.14173-4-krzk@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: at91: drop unused at91sam9g45_pcr_layout

The at91sam9g45_pcr_layout is not used so drop it to fix build warning:

  drivers/clk/at91/at91sam9g45.c:49:36: warning:
    'at91sam9g45_pcr_layout' defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200916161740.14173-1-krzk@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: davinci: add missing kerneldoc

Add missing kerneldoc to fix compile warning:

  drivers/clk/davinci/da8xx-cfgchip.c:578: warning: Function parameter or member 'dev' not described in 'da8xx_cfgchip_register_usb1_clk48'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20200916161740.14173-3-krzk@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fixed: add missing kerneldoc

Add missing kerneldoc to fix compile warnings like:

  drivers/clk/clk-fixed-factor.c:211: warning: Function parameter or member 'node' not described in 'of_fixed_factor_clk_setup'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916161740.14173-2-krzk@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: s2mps11: initialize driver via module_platform_driver

The driver was using subsys_initcall() because in old times deferred
probe was not supported everywhere and specific ordering was needed.
Since probe deferral works fine and specific ordering is discouraged
(hides dependencies between drivers and couples their boot order), the
driver can be converted to regular module_platform_driver.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200921203558.19554-1-krzk@kernel.org
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm: rpi: Add register to control pixel bvb clk

To use QHD or higher, we need to modify the pixel_bvb_clk value. So
add register to control this clock.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Link: https://lore.kernel.org/r/20200901040759.29992-2-hoegeun.kwon@samsung.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'clk-v5.10-samsung' of https://git./linux/kernel/git/snawrocki/clk into clk-samsung

Pull Samsung clk driver updates from Sylwester Nawrocki:

Minor refactoring removing most of the __clk_lookup() calls.

* tag 'clk-v5.10-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
  clk: samsung: Use cached clk_hws instead of __clk_lookup() calls
  clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions
  clk: samsung: Add clk ID definitions for the CPU parent clocks
  clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks
  clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d
  clk: samsung: Keep top BPLL mux on Exynos542x enabled

Merge tag 'clk-imx-5.10' of git://git./linux/kernel/git/shawnguo/linux into clk-imx

Pull i.MX clk driver updates from Shawn Guo:

 - A series from Anson Huang to support building i.MX ARMv8 platforms clock driver as module
 - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped
 - A couple of minor imx8mp clock correction from Jacky Bai
 - Add clock for CRC block found on vf610 SoC
 - A couple of clock flag fix-up from Peng Fan
 - Minor kerneldoc fix-up for i.MX clock drivers

* tag 'clk-imx-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: imx21: Remove clock driver
  clk: imx: gate2: Fix a few typos
  clk: imx: Fix and update kerneldoc
  clk: imx: fix i.MX7D peripheral clk mux flags
  clk: imx: fix composite peripheral flags
  clk: imx: Correct the memrepair clock on imx8mp
  clk: imx: Correct the root clk of media ldb on imx8mp
  clk: imx: vf610: Add CRC clock
  clk: imx: Explicitly include bits.h
  clk: imx8qxp: Support building i.MX8QXP clock driver as module
  clk: imx8m: Support module build
  clk: imx: Add clock configuration for ARMv7 platforms
  clk: imx: Support building i.MX common clock driver as module
  clk: composite: Export clk_hw_register_composite()
  clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits

clk: qcom: gcc-sdm660: Fix wrong parent_map

This was likely overlooked while porting the driver upstream.

Reported-by: Pavel Dubrova <pashadubrova@gmail.com>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200922120909.97203-1-konradybcio@gmail.com
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: dispcc: Update DP clk ops for phy design

The clk_rcg2_dp_determine_rate() function is used for the DP pixel clk.
This function should return the rate that can be achieved by the pixel
clk in 'struct clk_rate_request::rate' and match the logic similar to
what is seen in clk_rcg2_dp_set_rate(). But that isn't the case. Instead
the code merely bubbles the rate request up to the parent of the pixel
clk and doesn't try to do a rational approximation of the rate that
would be achieved by picking some m/n value for the RCG.

Let's change this logic so that we can assume the parent clk frequency
is fixed (it is because it's the VCO of the DP PLL that is configured
based on the link rate) and so that we can calculate what the m/n value
will be and adjust the req->rate appropriately.

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-10-swboyd@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-msm8939: remove defined but not used variables

This addresses the following gcc warning with "make W=1":

drivers/clk/qcom/gcc-msm8939.c:610:32: warning:
‘gcc_xo_gpll6_gpll0a_map’ defined but not used
[-Wunused-const-variable=]
 static const struct parent_map gcc_xo_gpll6_gpll0a_map[] = {
                                ^~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/qcom/gcc-msm8939.c:598:32: warning: ‘gcc_xo_gpll6_gpll0_map’
defined but not used [-Wunused-const-variable=]
 static const struct parent_map gcc_xo_gpll6_gpll0_map[] = {
                                ^~~~~~~~~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200911013722.1459387-1-yanaijie@huawei.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: ipq8074: make pcie0_rchng_clk_src static

This addresses the following sparse warning:

drivers/clk/qcom/gcc-ipq8074.c:4325:17: warning: symbol
'pcie0_rchng_clk_src' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200921142750.875142-1-yanaijie@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: rockchip: rk3399: Support module build

support CLK_OF_DECLARE and builtin_platform_driver_probe
double clk init method.
add module author, description and license to support building
Soc Rk3399 clock driver as module.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022316.24045-1-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: fix the clk config to support module build

use CONFIG_COMMON_CLK_ROCKCHIP for Rk common clk drivers.
use CONFIG_CLK_RKXX for Rk soc clk driver.
Mark CONFIG_CLK_RK3399 to "tristate",
to support building Rk3399 SoC clock driver as module.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022304.23908-1-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: Export some clock common APIs for module drivers

This is used by the Rockchip clk driver, export it to allow that
driver to be compiled as a module.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022225.23613-5-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: Export rockchip_register_softrst()

This is used by the Rockchip clk driver, export it to allow that
driver to be compiled as a module..

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022225.23613-4-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: Export rockchip_clk_register_ddrclk()

This is used by the Rockchip clk driver, export it to allow that
driver to be compiled as a module..

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022225.23613-3-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls

clk_hw_register_composite it's already exported.
Preparation for compilation of rK common clock drivers into modules.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022225.23613-2-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: rk3308: drop unused mux_timer_src_p

The parent names 'mux_timer_src_p' is not used:

  In file included from drivers/clk/rockchip/clk-rk3308.c:13:0:
  drivers/clk/rockchip/clk-rk3308.c:136:7: warning: ‘mux_timer_src_p’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916161740.14173-6-krzk@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: imx: imx21: Remove clock driver

As i.MX21 support has been removed, get rid of its clock driver too.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'sunxi-clk-for-5.10-1' of https://git./linux/kernel/git/sunxi/linux into clk-allwinner

Pull Allwinner clk driver updates from Maxime Ripard:

Our usual PR for the Allwinner SoCs, this time adding support for the
Allwinner A100 SoC, and adding support for the sigma-delta modulation on
the audio PLL for the R40.

* tag 'sunxi-clk-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL
  clk: sunxi-ng: add support for the Allwinner A100 CCU
  dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU

Merge tag 'clk-meson-v5.10-1' of https://github.com/BayLibre/clk-meson into clk-amlogic

Pull amlogic clk driver updates from Jerome Brunet:

 - g12: update audio clock inverter and fdiv2 flag
 - config: allow to disable unnecessary amlogic clock controllers

* tag 'clk-meson-v5.10-1' of https://github.com/BayLibre/clk-meson:
  clk: meson: make shipped controller configurable
  clk: meson: g12a: mark fclk_div2 as critical
  clk: meson: axg-audio: fix g12a tdmout sclk inverter
  clk: meson: axg-audio: separate axg and g12a regmap tables
  clk: meson: add sclk-ws driver

Merge tag 'clk-renesas-for-v5.10-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Add support for the new R-Car V3U (R8A779A0) SoC
 - Add support for the VSP for Resizing clock on RZ/G1H,
 - Fix VSP clock names to match corrected hardware documentation.
 - Minor fixes and improvements

* tag 'clk-renesas-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: rcar-gen3: Update description for RZ/G2
  clk: renesas: cpg-mssr: Add support for R-Car V3U
  clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv
  clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag
  dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0
  dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions
  dt-bindings: power: Add r8a779a0 SYSC power domain definitions
  clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r)
  clk: renesas: r8a7742: Add clk entry for VSPR

clk: renesas: rcar-gen3: Update description for RZ/G2

The rcar-gen3-cpg driver is also used on Renesas RZ/G2 SoC's, update the
description for the CLK_RCAR_GEN3_CPG config symbol to reflect this.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200911101703.20521-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: cpg-mssr: Add support for R-Car V3U

Initial support for R-Car V3U (r8a779a0), including core, module
clocks, resets, and register access, because register specification
differs from R-Car Gen2/3.

Inspired by patches in the BSP by LUU HOAI.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-4-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'renesas-r8a779a0-dt-binding-defs-tag' into clk-renesas-for-v5.10

Renesas R-Car V3U DT Binding Definitions

Clock and Power Domain definitions for the Renesas R-Car V3U (R8A779A0)
SoC, shared by driver and DT source files.

clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv

To support other register layouts in the future, add register pointers
of {control,status,reset,reset_clear}_regs into struct cpg_mssr_priv.
After that, we can remove unused macros like MSTPSR().  No behavioral
changes.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag

Geert suggested defining multiple register layout variants using an enum
[1] to support further devices like R-Car V3U.  So, use enum
clk_reg_layout instead of a boolean .stbyctrl flag.  No behavioral
change.

[1] https://lore.kernel.org/linux-renesas-soc/CAMuHMdVAgN69p9FFnQdO4iHk2CHkeNaVui2Q-FOY6_BFVjQ-Nw@mail.gmail.com/

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0

Add binding documentation for the R-Car V3U (R8A779A0) Clock Pulse
Generator.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599470390-29719-7-git-send-email-yoshihiro.shimoda.uh@renesas.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: samsung: Use cached clk_hws instead of __clk_lookup() calls

For the CPU clock registration two parent clocks are required, these
are now being passed as struct clk_hw pointers, rather than by the
global scope names. That allows us to avoid  __clk_lookup() calls
and simplifies a bit the CPU clock registration function.
While at it drop unneeded extern keyword in the function declaration.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20200826171529.23618-3-s.nawrocki@samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions

Use non-zero clock IDs in definitions of the CPU parent clocks
for exynos5420, exynos5250 SoCs. This will allow us to reference
the parent clocks directly in the driver by cached struct clk_hw
pointers, rather than doing clk lookup by name.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20200826171529.23618-2-s.nawrocki@samsung.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: samsung: Add clk ID definitions for the CPU parent clocks

Add clock ID definitions for the CPU parent clocks for SoCs
which don't have such definitions yet. This will allow us to
reference the parent clocks directly by cached struct clk_hw
pointers in the clock provider, rather than doing clk lookup
by name.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200826171529.23618-1-s.nawrocki@samsung.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks

This patch adds a clk ID to the mout_sw_aclk_g3d clk definition so related
clk pointer gets cached in the driver's private data and can be used
later instead of a __clk_lookup() call.

With that we have all clocks used in the clk_prepare_enable() calls in the
clk provider init callback cached in clk_data.hws[] and we can reference
the clk pointers directly rather than using __clk_lookup() with global names.

Link: https://lore.kernel.org/r/20200811151251.31613-2-s.nawrocki@samsung.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d

This patch adds ID for the mout_sw_aclk_g3d (SW_CLKMUX_ACLK_G3D) clock,
mostly for internal use in the CMU driver. It will allow to avoid the
__clk_lookup() call when setting up the clock during the clock provider
initialization.

Link: https://lore.kernel.org/r/20200811151251.31613-1-s.nawrocki@samsung.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: samsung: Keep top BPLL mux on Exynos542x enabled

BPLL clock must not be disabled because it is needed for proper DRAM
operation. This is normally handled by respective memory devfreq driver,
but when that driver is not yet probed or its probe has been deferred
the clock might get disabled what causes board hang. Fix this by calling
clk_prepare_enable() directly from the clock provider driver.

Cc: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200807133143.22748-1-m.szyprowski@samsung.com
Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422")
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: imx: gate2: Fix a few typos

A few words were misspelled in this comment.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions

Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
V3U (R8A779A0) SoC.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599657211-17504-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: power: Add r8a779a0 SYSC power domain definitions

Add power domain indices for R-Car V3U (r8a779a0).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599470390-29719-5-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: meson: make shipped controller configurable

Add the necessary bits so unnecessary amlogic clock controllers can be
compiled out. This allows to save a few kB when necessary.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200828154735.435374-1-jbrunet@baylibre.com

clk: imx: Fix and update kerneldoc

Fix and add missing kerneldoc to fix compile warnings like:

  drivers/clk/imx/clk-pfd.c:27: warning: Function parameter or member 'hw' not described in 'clk_pfd'
  drivers/clk/imx/clk-pllv3.c:53: warning: Function parameter or member 'ref_clock' not described in 'clk_pllv3'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: fix i.MX7D peripheral clk mux flags

According to RM, Page 574, Chapter 5.2.6.4.3 Peripheral clock slice,
"IP clock slices must be stopped to change the clock source.".

So we must have CLK_SET_PARENT_GATE flag to avoid glitch.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: fix composite peripheral flags

According to RM, for peripheral clock slice,
"IP clock slices must be stopped to change the clock source.".

So we must have CLK_SET_PARENT_GATE flag to avoid glitch.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r)

VSP1 instances VSPS (which stands for "VSP Standard") and VSPR (which
stands for "VSP for Resizing") were wrongly named as "vsp1-sy" and
"vsp1-rt". The clock section in the SoC datasheets misunderstood the
abbreviations as meaning VSP System and VSP Realtime, and named the
corresponding clocks VSP1(SY) and VSP1(RT). This mistake has been
carried over to the kernel code.

This patch fixes this by renaming the clock names to "vsps" and "vspr".

Inspired from commit 79ea9934b8df ("ARM: shmobile: r8a7790: Rename
VSP1_(SY|RT) clocks to VSP1_(S|R)")

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200831183722.8165-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a7742: Add clk entry for VSPR

Add clock entry 130 for VSPR (VSP for Resizing) module, so that this module
can be used on R8A7742 (RZ/G1H) SoC.

Alongside rename clock entry "vsp1-sy" to "vsps" (VSP Standard), so that
VSP1 clock names are in sync.

Note: The entry for VSPR clock was accidentally dropped from RZ/G manual
when all the information related to RT were removed.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20200831180312.7453-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: imx: Correct the memrepair clock on imx8mp

The root clock slice at offset 0xbf80 should be memrepair
clock, so correct it. And this clock should be always on
to make sure the memory repair function can works well.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: Correct the root clk of media ldb on imx8mp

The root clock slice at 0xbf00 is media_ldb clock,
not csi_phy2_ref, so correct it.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: meson: g12a: mark fclk_div2 as critical

On Amlogic Meson G12b platform, similar to fclk_div3, the fclk_div2
seems to be necessary for the system to operate correctly as well.

Typically, the clock also gets chosen by the eMMC peripheral. This
probably masked the problem so far. However, when booting from a SD
card the clock seems to get disabled which leads to a system freeze.

Let's mark this clock as critical, fixing boot from SD card on G12b
platforms.

Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/577e0129e8ee93972d92f13187ff4e4286182f67.1598629915.git.stefan@agner.ch