softfloat: Tidy mul128By64To192

Clean up the formatting and variables; no functional change.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use add192 in mul128To256

We can perform the operation in 6 total adds instead of 8.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use mulu64 for mul64To128

Via host-utils.h, we use a host widening multiply for
64-bit hosts, and a common subroutine for 32-bit hosts.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move muladd_floats to softfloat-parts.c.inc

Rename to parts$N_muladd.
Implement float128_muladd with FloatParts128.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move mul_floats to softfloat-parts.c.inc

Rename to parts$N_mul.
Reimplement float128_mul with FloatParts128.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Implement float128_add/sub via parts

Replace the existing Berkeley implementation with the
FloatParts implementation.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move addsub_floats to softfloat-parts.c.inc

In preparation for implementing multiple sizes.  Rename to parts_addsub,
split out parts_add/sub_normal for future reuse with muladd.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use uadd64_carry, usub64_borrow in softfloat-macros.h

Use compiler support for carry arithmetic.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move round_canonical to softfloat-parts.c.inc

At the same time, convert to pointers, renaming to parts$N_uncanon,
and define a macro for parts_uncanon using QEMU_GENERIC.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move sf_canonicalize to softfloat-parts.c.inc

At the same time, convert to pointers, rename to parts$N_canonicalize
and define a macro for parts_canonicalize using QEMU_GENERIC.

Rearrange the cases to recognize float_class_normal as
early as possible.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move pick_nan_muladd to softfloat-parts.c.inc

At the same time, convert to pointers, rename to pick_nan_muladd$N
and define a macro for pick_nan_muladd using QEMU_GENERIC.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move pick_nan to softfloat-parts.c.inc

At the same time, convert to pointers, rename to parts$N_pick_nan
and define a macro for parts_pick_nan using QEMU_GENERIC.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move return_nan to softfloat-parts.c.inc

At the same time, convert to pointers, rename to return_nan$N
and define a macro for return_nan using QEMU_GENERIC.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert float128_default_nan to parts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert float128_silence_nan to parts

This is the minimal change that also introduces float128_params,
float128_unpack_raw, and float128_pack_raw without running into
unused symbol Werrors.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Rearrange FloatParts64

Shuffle the fraction to the end, otherwise sort by size.
Add frac_hi and frac_lo members to alias frac.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with parts_silence_nan

At the same time, rename to parts64_silence_nan, split out
parts_silence_nan_frac, and define a macro for parts_silence_nan.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with ftype_round_pack_canonical

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with ftype_unpack_canonical

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with ftype_pack_raw

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with pack_raw

At the same time, rename to pack_raw64.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with ftype_unpack_raw

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with unpack_raw

At the same time, rename to unpack_raw64.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use pointers with parts_default_nan

At the same time, rename to parts64_default_nan and add a
macro for parts_default_nan.  This will be flushed out once
128-bit support is added.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move type-specific pack/unpack routines

In preparation from moving sf_canonicalize.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Rename FloatParts to FloatParts64

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Do not produce a default_nan from parts_silence_nan

Require default_nan_mode to be set instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Set set_default_nan_mode with set_snan_bit_is_one

This behavior is currently hard-coded in parts_silence_nan,
but setting this bit properly will allow this to be cleaned up.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: fix return_nan vs default_nan_mode

Do not call parts_silence_nan when default_nan_mode is in
effect.  This will avoid an assert in a later patch.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use return_nan in float_to_float

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Add float_cmask and constants

Testing more than one class at a time is better done with masks.
This reduces the static branch count.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Tidy a * b + inf return

No reason to set values in 'a', when we already
have float_class_inf in 'c', and can flip that sign.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Use float_raise in more places

We have been somewhat inconsistent about when to use
float_raise and when to or in the bit by hand.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Inline float_raise

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move the binary point to the msb

Rather than point the binary point at msb-1, put it at the msb.
Use uadd64_overflow to detect when addition overflows instead
of DECOMPOSED_OVERFLOW_BIT.

This reduces the number of special cases within the code, such
as shifting an int64_t either left or right during conversion.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests/fp: add quad support to the benchmark utility

Currently this only support softfloat calculations because working out
if the hardware supports 128 bit floats needs configure magic. The 3
op muladd operation is currently unimplemented so commented out for
now.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201020163738.27700-8-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Use add/sub overflow routines in tcg-runtime-gvec.c

Obvious uses of the new functions.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/host-utils: Add wrappers for carry builtins

These builtins came in clang 3.8, but are not present in gcc through
version 11.  Even in clang the optimization is only ideal on x86_64,
but never worse than the hand-coding that we currently do.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/host-utils: Add wrappers for overflow builtins

These builtins came in with gcc 5 and clang 3.8, which are
slightly newer than our supported minimum compiler versions.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/host-utils: Use __builtin_bitreverseN

Clang has added some builtins for these operations;
use them if available.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/marcandre/tags/rtd-pull-request' into staging

Pull request

# gpg: Signature made Fri 14 May 2021 12:12:24 BST
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/marcandre/tags/rtd-pull-request:
  sphinx: adopt kernel readthedoc theme

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into staging

Add a bus multiplexer device

This patch set adds a bus multiplexer and the necessary infrastructure
in the I2C code to allow it to work.

These are common on systems with lots of I2C devices, like an IPMI BMC.

# gpg: Signature made Thu 13 May 2021 22:48:07 BST
# gpg:                using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg:                 aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg:                 aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg:                 aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688  2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-6.1-v1:
  hw/i2c: add pca954x i2c-mux switch
  hw/i2c: move search to i2c_scan_bus method
  hw/i2c: add match method for device search
  hw/i2c: name I2CNode list in I2CBus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sphinx: adopt kernel readthedoc theme

The default "alabaster" sphinx theme has a couple shortcomings:
- the navbar moves along the page
- the search bar is not always at the same place
- it lacks some contrast and colours

The "rtd" theme from readthedocs.org is a popular third party theme used
notably by the kernel, with a custom style sheet. I like it better,
perhaps others do too. It also simplifies the "Edit on Gitlab" links.

Tweak a bit the custom theme to match qemu.org style, use the
QEMU logo, and favicon etc.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210323115328.4146052-1-marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210513a' into staging

Migration pull 2021-05-13

Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.

The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 13 May 2021 18:36:06 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20210513a:
  tests/migration: introduce multifd into guestperf
  tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths
  tests/migration-test: Fix "true" vs true
  migration/ram: Use offset_in_ramblock() in range checks
  migration/multifd: Print used_length of memory block
  migration/ram: Handle RAM block resizes during postcopy
  migration/ram: Simplify host page handling in ram_load_postcopy()
  migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init()
  exec: Relax range check in ram_block_discard_range()
  migration/ram: Handle RAM block resizes during precopy
  numa: Make all callbacks of ram block notifiers optional
  numa: Teach ram block notifiers about resizeable ram blocks
  util: vfio-helpers: Factor out and fix processing of existing ram blocks
  migration: Drop redundant query-migrate result @blocked
  migration/ram: Optimize ram_save_host_page()
  migration/ram: Reduce unnecessary rate limiting
  migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2021-05-12' into staging

Miscellaneous patches for 2021-05-12

# gpg: Signature made Wed 12 May 2021 17:22:15 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2021-05-12:
  Drop the deprecated unicore32 target
  Drop the deprecated lm32 target
  block: Drop the sheepdog block driver
  Remove the deprecated moxie target
  monitor/qmp: fix race on CHR_EVENT_CLOSED without OOB

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/migration: introduce multifd into guestperf

Guestperf tool does not cover the multifd-enabled migration
currently, it is worth supporting so that developers can
analysis the migration performance with all kinds of
migration.

To request that multifd is enabled, with 4 channels:
$ ./tests/migration/guestperf.py \
    --multifd --multifd-channels 4 --output output.json

To run the entire standardized set of multifd-enabled
comparisons, with unix migration:
$ ./tests/migration/guestperf-batch.py \
    --dst-host localhost --transport unix \
    --filter compr-multifd* --output outputdir

Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <cfeeb04d17ad932c42a9871294058b77429ad1b7.1616171924.git.huangy81@chinatelecom.cn>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths

Coverity notices that several places in the migration-test code fail
to free memory in error-exit paths.  This is pretty unimportant in
test case code, but we can avoid having to manually free the memory
entirely by using g_autofree.

The places where Coverity spotted a leak were relating to early exits
not freeing 'uri' in test_precopy_unix(), do_test_validate_uuid(),
migrate_postcopy_prepare() and test_migrate_auto_converge().  This
patch converts all the string-allocation in the test code to
g_autofree for consistency.

Fixes: Coverity CID 1432313, 1432315, 1432352, 1432364
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210506185819.9010-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests/migration-test: Fix "true" vs true

Accidental use of "true" as a boolean; spotted by coverity
and Peter.

Fixes: b99784ef6c3
Fixes: d795f47466e
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Coverity (CID 1432373, 1432292, 1432288)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210504100545.112213-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/ram: Use offset_in_ramblock() in range checks

We never read or write beyond the used_length of memory blocks when
migrating. Make this clearer by using offset_in_ramblock() consistently.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-11-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/multifd: Print used_length of memory block

We actually want to print the used_length, against which we check.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-10-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/ram: Handle RAM block resizes during postcopy

Resizing while migrating is dangerous and does not work as expected.
The whole migration code works with the usable_length of a ram block and
does not expect this value to change at random points in time.

In the case of postcopy, relying on used_length is racy as soon as the
guest is running. Also, when used_length changes we might leave the
uffd handler registered for some memory regions, reject valid pages
when migrating and fail when sending the recv bitmap to the source.

Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()

Let's remember the original used_length in a separate variable and
use it in relevant postcopy code. Make sure to update it when we resize
during precopy, when synchronizing the RAM block sizes with the source.

Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-9-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/ram: Simplify host page handling in ram_load_postcopy()

Add two new helper functions. This will come in come handy once we want to
handle ram block resizes while postcopy is active.

Note that ram_block_from_stream() will already print proper errors.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-8-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: Added brackets in host_page_from_ram_block_offset
     to cause uintptr_t to cast the sum, to fix armhf-cross build

migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init()

In case we grow our RAM after ram_postcopy_incoming_init() (e.g., when
synchronizing the RAM block state with the migration source), the resized
part would not get discarded. Let's perform that when being notified
about a resize while postcopy has been advised, but is not listening
yet. With precopy, the process is as following:

1. VM created
- RAM blocks are created
2. Incomming migration started
- Postcopy is advised
- All pages in RAM blocks are discarded
3. Precopy starts
- RAM blocks are resized to match the size on the migration source.
- RAM pages from precopy stream are loaded
- Uffd handler is registered, postcopy starts listening
4. Guest started, postcopy running
- Pagefaults get resolved, pages get placed

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-7-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

exec: Relax range check in ram_block_discard_range()

We want to make use of ram_block_discard_range() in the RAM block resize
callback when growing a RAM block, *before* used_length is changed.
Let's relax the check. As RAM blocks always mmap the whole max_length area,
we cannot corrupt unrelated data.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-6-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/ram: Handle RAM block resizes during precopy

Resizing while migrating is dangerous and does not work as expected.
The whole migration code works on the usable_length of ram blocks and does
not expect this to change at random points in time.

In the case of precopy, the ram block size must not change on the source,
after syncing the RAM block list in ram_save_setup(), so as long as the
guest is still running on the source.

Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()

Use the ram block notifier to get notified about resizes. Let's simply
cancel migration and indicate the reason. We'll continue running on the
source. No harm done.

Update the documentation. Postcopy will be handled separately.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-5-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Manual merge

numa: Make all callbacks of ram block notifiers optional

Let's make add/remove optional. We want to introduce a RAM block
notifier for RAM migration that is only interested in resize events.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-4-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

numa: Teach ram block notifiers about resizeable ram blocks

Ram block notifiers are currently not aware of resizes. To properly
handle resizes during migration, we want to teach ram block notifiers about
resizeable ram.

Introduce the basic infrastructure but keep using max_size in the
existing notifiers. Supply the max_size when adding and removing ram
blocks. Also, notify on resizes.

Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: xen-devel@lists.xenproject.org
Cc: haxm-team@intel.com
Cc: Paul Durrant <paul@xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Wenchao Wang <wenchao.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-3-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

util: vfio-helpers: Factor out and fix processing of existing ram blocks

Factor it out into common code when a new notifier is registered, just
as done with the memory region notifier. This keeps logic about how to
process existing ram blocks at a central place.

Just like when adding a new ram block, we have to register the max_length.
Ram blocks are only "fake resized". All memory (max_length) is mapped.

Print the warning from inside qemu_vfio_ram_block_added().

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-2-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Drop redundant query-migrate result @blocked

Result @blocked is redundant.  Unfortunately, we realized this too
close to the release to risk dropping it, so we deprecated it
instead, in commit e11ce6c06.

Since it was deprecated from the start, we can delete it without
the customary grace period.  Do so.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210429140424.2802929-1-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/ram: Optimize ram_save_host_page()

Starting from pss->page, ram_save_host_page() will check every page
and send the dirty pages up to the end of the current host page or
the boundary of used_length of the block. If the host page size is
a huge page, the step "check" will take a lot of time.

It will improve performance to use migration_bitmap_find_dirty().

Tested on Kunpeng 920; VM parameters: 1U 4G (page size 1G)
The time of ram_save_host_page() in the last round of ram saving:
before optimize: 9250us after optimize: 34us

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210316125716.1243-3-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/ram: Reduce unnecessary rate limiting

When the host page is a huge page and something is sent in the
current iteration, migration_rate_limit() should be executed.
If not, it can be omitted.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210316125716.1243-2-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"

The bulk stage is kind of weird: migration_bitmap_find_dirty() will
indicate a dirty page, however, ram_save_host_page() will never save it, as
migration_bitmap_clear_dirty() detects that it is not dirty.

We already fill the bitmap in ram_list_init_bitmaps() with ones, marking
everything dirty - it didn't used to be that way, which is why we needed
an explicit first bulk stage.

Let's simplify: make the bitmap the single source of thuth. Explicitly
handle the "xbzrle_enabled after first round" case.

Regarding XBZRLE (implicitly handled via "ram_bulk_stage = false" right
now), there is now a slight change in behavior:
- Colo: When starting, it will be disabled (was implicitly enabled)
  until the first round actually finishes.
- Free page hinting: When starting, XBZRLE will be disabled (was implicitly
  enabled) until the first round actually finished.
- Snapshots: When starting, XBZRLE will be disabled. We essentially only
  do a single run, so I guess it will never actually get disabled.

Postcopy seems to indirectly disable it in ram_save_page(), so there
shouldn't be really any change.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210216105039.40680-1-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Merge remote-tracking branch 'remotes/philmd/tags/pflash-20210511' into staging

Parallel NOR Flash patches queue

- Simplify memory layout when no pflash_cfi02 mapping requested

# gpg: Signature made Tue 11 May 2021 17:12:58 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/pflash-20210511:
  hw/block/pflash_cfi02: Do not create aliases when not necessary
  hw/block/pflash_cfi02: Set romd mode in pflash_cfi02_realize()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210511' into staging

A large collection of RISC-V fixes, improvements and features

 - Clenaup some left over v1.9 code
 - Documentation improvements
 - Support for the shakti_c machine
 - Internal cleanup of the CSR accesses
 - Updates to the OpenTitan platform
 - Support for the virtio-vga
 - Fix for the saturate subtract in vector extensions
 - Experimental support for the ePMP spec
 - A range of other internal code cleanups and bug fixes

# gpg: Signature made Tue 11 May 2021 11:17:10 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20210511: (42 commits)
  target/riscv: Fix the RV64H decode comment
  target/riscv: Consolidate RV32/64 16-bit instructions
  target/riscv: Consolidate RV32/64 32-bit instructions
  target/riscv: Remove an unused CASE_OP_32_64 macro
  target/riscv: Remove the unused HSTATUS_WPRI macro
  target/riscv: Remove the hardcoded SATP_MODE macro
  target/riscv: Remove the hardcoded MSTATUS_SD macro
  target/riscv: Remove the hardcoded HGATP_MODE macro
  target/riscv: Remove the hardcoded SSTATUS_SD macro
  target/riscv: Remove the hardcoded RVXLEN macro
  target/riscv: fix a typo with interrupt names
  fpu/softfloat: set invalid excp flag for RISC-V muladd instructions
  hw/riscv: Fix OT IBEX reset vector
  target/riscv: fix exception index on instruction access fault
  target/riscv: fix vrgather macro index variable type bug
  target/riscv: Add ePMP support for the Ibex CPU
  target/riscv/pmp: Remove outdated comment
  target/riscv: Add a config option for ePMP
  target/riscv: Implementation of enhanced PMP (ePMP)
  target/riscv: Add ePMP CSR access functions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Drop the deprecated unicore32 target

Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0.  See
there for rationale.

Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>

Drop the deprecated lm32 target

Target lm32 was deprecated in commit d8498005122, v5.2.0.  See there
for rationale.

Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.

Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]

block: Drop the sheepdog block driver

It was deprecated in commit e1c4269763, v5.2.0.  See that commit
message for rationale.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>

Remove the deprecated moxie target

There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

monitor/qmp: fix race on CHR_EVENT_CLOSED without OOB

The QMP dispatcher coroutine holds the qmp_queue_lock over a yield
point, where it expects to be rescheduled from the main context. If a
CHR_EVENT_CLOSED event is received just then, it can race and block the
main thread on the mutex in monitor_qmp_cleanup_queue_and_resume.

monitor_resume does not need to be called from main context, so we can
call it immediately after popping a request from the queue, which allows
us to drop the qmp_queue_lock mutex before yielding.

Suggested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20210322154024.15011-1-s.reiter@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* AccelCPUClass and sysemu/user split for i386 (Claudio)
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring

# gpg: Signature made Wed 12 May 2021 09:39:29 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (32 commits)
  coverity-scan: list components, move model to scripts/coverity-scan
  configure: fix detection of gdbus-codegen
  qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict
  main-loop: remove dead code
  target/i386: use mmu_translate for NPT walk
  target/i386: allow customizing the next phase of the translation
  target/i386: extend pg_mode to more CR0 and CR4 bits
  target/i386: pass cr3 to mmu_translate
  target/i386: extract mmu_translate
  target/i386: move paging mode constants from SVM to cpu.h
  target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants
  accel: add init_accel_cpu for adapting accel behavior to CPU type
  accel: move call to accel_init_interfaces
  i386: make cpu_load_efer sysemu-only
  target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu
  target/i386: gdbstub: introduce aux functions to read/write CS64 regs
  i386: split off sysemu part of cpu.c
  i386: split seg_helper into user-only and sysemu parts
  i386: split svm_helper into sysemu and stub-only user
  i386: separate fpu_helper sysemu-only parts
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20210510-pull-request' into staging

edid: display id support (for 5k+), bugfixes.
virtio-gpu: iommu fix, device split.

# gpg: Signature made Mon 10 May 2021 14:20:36 BST
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20210510-pull-request: (25 commits)
  virtio-gpu: add virtio-vga-gl
  modules: add have_vga
  virtio-gpu: add virtio-gpu-gl-pci
  virtio-gpu: move fields to struct VirtIOGPUGL
  virtio-gpu: drop use_virgl_renderer
  virtio-gpu: move virtio-gpu-gl-device to separate module
  virtio-gpu: drop VIRGL() macro
  virtio-gpu: move update_cursor_data
  virtio-gpu: move virgl process_cmd
  virtio-gpu: move virgl gl_flushed
  virtio-gpu: move virgl handle_ctrl
  virtio-gpu: use class function for ctrl queue handlers
  virtio-gpu: move virgl reset
  virtio-gpu: move virgl realize + properties
  virtio-gpu: add virtio-gpu-gl-device
  virtio-gpu: rename virgl source file.
  virtio-gpu: handle partial maps properly
  edid: add support for DisplayID extension (5k resolution)
  edid: allow arbitrary-length checksums
  edid: move timing generation into a separate function
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

coverity-scan: list components, move model to scripts/coverity-scan

Place all files that can be useful to rebuild the Coverity
configuration in scripts/coverity-scan: the existing model
file, and the components setup.

The Markdown syntax was tested with Pandoc (but in any case
is meant more as a human-readable reference than as a part
of documentation).

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: fix detection of gdbus-codegen

"pkg-config --variable=gdbus_codegen gio-2.0" returns "gdbus-codegen",
and it does not pass test -x (which does not walk the path).

Meson 0.58.0 notices that something is iffy, as the dbus_vmstate1
assignment in tests/qtest/meson.build uses an empty string as the
command, and fails very eloquently:

../tests/qtest/meson.build:92:2: ERROR: No program name specified.

Use the "has" function instead of test -x, and fix the generation
of config-host.mak since meson.build expects that GDBUS_CODEGEN
is absent, rather than empty, if the tool is unavailable.

Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: #178
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20210510' into staging

Xen patches

- Avoid mmap race involving Xen's mapcache
- Fix xenforeignmemory_resource leak at exit
- Fix xen-block to choose a driver for the disk image when created via
  xenstore.

# gpg: Signature made Mon 10 May 2021 13:49:40 BST
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [unknown]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* remotes/aperard/tags/pull-xen-20210510:
  xen-block: Use specific blockdev driver
  xen: Free xenforeignmemory_resource at exit
  xen-mapcache: avoid a race on memory map while using MAP_FIXED

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10' into staging

* Make the s390-ccw bios compilable with Clang
* Fix ECKD booting with null block numbers in the chain

# gpg: Signature made Mon 10 May 2021 08:27:34 BST
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10:
  pc-bios/s390: Update the s390-ccw bios binaries with the Clang and other fixes
  pc-bios/s390-ccw: Allow building with Clang, too
  pc-bios/s390-ccw: Silence GCC 11 stringop-overflow warning
  pc-bios/s390-ccw: Fix the cc-option macro in the Makefile
  pc-bios/s390-ccw: Silence warning from Clang by marking panic() as noreturn
  pc-bios/s390-ccw/netboot: Use "-Wl," prefix to pass parameter to the linker
  pc-bios/s390-ccw: Use reset_psw pointer instead of hard-coded null pointer
  pc-bios/s390-ccw/bootmap: Silence compiler warning from Clang
  pc-bios/s390-ccw: don't try to read the next block if end of chunk is reached

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/block/pflash_cfi02: Do not create aliases when not necessary

When no mapping is requested, it is pointless to create
alias regions.
Only create them when multiple mappings are requested to
simplify the memory layout. The flatview is not changed.

For example using 'qemu-system-sh4 -M r2d -S -monitor stdio',

* before:

  (qemu) info mtree
  address-space: memory
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000000ffffff (prio 0, i/o): pflash
        0000000000000000-0000000000ffffff (prio 0, romd): alias pflash-alias @r2d.flash 0000000000000000-0000000000ffffff
      0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
      000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram
  (qemu) info mtree -f
  FlatView #0
   AS "memory", root: system
   AS "cpu-memory-0", root: system
   Root memory region: system
    0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash
    0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
    000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram

* after:

  (qemu) info mtree
  address-space: memory
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash
      0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
      000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram
  (qemu) info mtree -f
  FlatView #0
   AS "memory", root: system
   AS "cpu-memory-0", root: system
   Root memory region: system
    0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash
    0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
    000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210325120921.858993-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/block/pflash_cfi02: Set romd mode in pflash_cfi02_realize()

The ROMD mode isn't related to mapping setup.
Ideally we'd set this mode when the state machine resets,
but for now simply move it to pflash_cfi02_realize() to
not introduce logical change.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210325120921.858993-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210506' into staging

virtiofsd pull 2021-05-06

A pile of cleanups:

  Use of glib allocators from Mahmoud
  Virtio spec compliance and printf cleanup from me.
  Sugar to turn on xattr when defining xattr mapping from Carlos
  an assert cleanup from Greg

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 06 May 2021 19:54:18 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert-gitlab/tags/pull-virtiofs-20210506:
  virtiofsd/fuse_virtio.c: Changed allocations of locals to GLib
  virtiofsd/passthrough_ll.c: Changed local allocations to GLib functions
  virtiofsd: Changed allocations of fv_VuDev & its internals to GLib functions
  virtiofsd: Changed allocation of lo_map_elems to GLib's functions
  virtiofsd: Changed allocations of fuse_session to GLib's functions
  virtiofsd: Changed allocations of iovec to GLib's functions
  virtiofsd: Changed allocations of fuse_req to GLib functions
  virtiofsd: Don't assume header layout
  virtiofs: Fixup printf args
  virtiofsd: Add help for -o xattr-mapping
  virtiofsd: Allow use "-o xattrmap" without "-o xattr"
  virtiofsd: Fix side-effect in assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/riscv: Fix the RV64H decode comment

BugLink: https://gitlab.com/qemu-project/qemu/-/issues/47
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 024ce841221c1d15c74b253512428c4baca7e4ba.1619234854.git.alistair.francis@wdc.com

target/riscv: Consolidate RV32/64 16-bit instructions

This patch removes the insn16-32.decode and insn16-64.decode decode
files and consolidates the instructions into the general RISC-V
insn16.decode decode tree.

This means that all of the instructions are avaliable in both the 32-bit
and 64-bit builds. This also means that we run a check to ensure we are
running a 64-bit softmmu before we execute the 64-bit only instructions.
This allows us to include the 32-bit instructions in the 64-bit build,
while also ensuring that 32-bit only software can not execute the
instructions.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 01e2b0efeae311adc7ebf133c2cde6a7a37224d7.1619234854.git.alistair.francis@wdc.com

target/riscv: Consolidate RV32/64 32-bit instructions

This patch removes the insn32-64.decode decode file and consolidates the
instructions into the general RISC-V insn32.decode decode tree.

This means that all of the instructions are avaliable in both the 32-bit
and 64-bit builds. This also means that we run a check to ensure we are
running a 64-bit softmmu before we execute the 64-bit only instructions.
This allows us to include the 32-bit instructions in the 64-bit build,
while also ensuring that 32-bit only software can not execute the
instructions.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: db709360e2be47d2f9c6483ab973fe4791aefa77.1619234854.git.alistair.francis@wdc.com

target/riscv: Remove an unused CASE_OP_32_64 macro

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 4853459564af35a6690120c74ad892f60cec35ff.1619234854.git.alistair.francis@wdc.com

target/riscv: Remove the unused HSTATUS_WPRI macro

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: e095b57af0d419c8ed822958f04dfc732d7beb7e.1619234854.git.alistair.francis@wdc.com

target/riscv: Remove the hardcoded SATP_MODE macro

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 6b701769d6621f45ba1739334198e36a64fe04df.1619234854.git.alistair.francis@wdc.com

target/riscv: Remove the hardcoded MSTATUS_SD macro

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: fcc125d96da941b56c817c9dd6068dc36478fc53.1619234854.git.alistair.francis@wdc.com

target/riscv: Remove the hardcoded HGATP_MODE macro

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 665f624bfdc2e3ca64265004b07de7489c77a766.1619234854.git.alistair.francis@wdc.com

target/riscv: Remove the hardcoded SSTATUS_SD macro

This also ensures that the SD bit is not writable.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 9ea842309f0fd7adff172790f5b5fc058b40f2f1.1619234854.git.alistair.francis@wdc.com

target/riscv: Remove the hardcoded RVXLEN macro

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: a07bc0c6dc4958681b4f93cbc5d0acc31ed3344a.1619234854.git.alistair.francis@wdc.com

target/riscv: fix a typo with interrupt names

Interrupt names have been swapped in 205377f8 and do not follow
IRQ_*_EXT definition order.

Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210421133236.11323-1-emmanuel.blot@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

fpu/softfloat: set invalid excp flag for RISC-V muladd instructions

In IEEE 754-2008 spec:
  Invalid operation exception is signaled when doing:
  fusedMultiplyAdd(0, Inf, c) or fusedMultiplyAdd(Inf, 0, c)
  unless c is a quiet NaN; if c is a quiet NaN then it is
  implementation defined whether the invalid operation exception
  is signaled.

In RISC-V Unprivileged ISA spec:
  The fused multiply-add instructions must set the invalid
  operation exception flag when the multiplicands are Inf and
  zero, even when the addend is a quiet NaN.

This commit set invalid operation execption flag for RISC-V when
multiplicands of muladd instructions are Inf and zero.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210420013150.21992-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: Fix OT IBEX reset vector

The IBEX documentation [1] specifies the reset vector to be "the most
significant 3 bytes of the boot address and the reset value (0x80) as
the least significant byte".

[1] https://github.com/lowRISC/ibex/blob/master/doc/03_reference/exception_interrupts.rst

Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210420080008.119798-1-alexander.wagner@ulal.de
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix exception index on instruction access fault

When no MMU is used and the guest code attempts to fetch an instruction
from an invalid memory location, the exception index defaults to a data
load access fault, rather an instruction access fault.

Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: FB9EA197-B018-4879-AB0F-922C2047A08B@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix vrgather macro index variable type bug

ETYPE may be type of uint64_t, thus index variable has to be declared as
type of uint64_t, too. Otherwise the value read from vs1 register may be
truncated to type of uint32_t.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419060302.14075-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add ePMP support for the Ibex CPU

The physical Ibex CPU has ePMP support and it's enabled for the
OpenTitan machine so let's enable ePMP support for the Ibex CPU in QEMU.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: d426baabab0c9361ed2e989dbe416e417a551fd1.1618812899.git.alistair.francis@wdc.com

target/riscv/pmp: Remove outdated comment

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 10387eec21d2f17c499a78fdba85280cab4dd27f.1618812899.git.alistair.francis@wdc.com

target/riscv: Add a config option for ePMP

Add a config option to enable experimental support for ePMP. This
is disabled by default and can be enabled with 'x-epmp=true'.

Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com>
Signed-off-by: Hou Weiying <weiying_hou@outlook.com>
Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: a22ccdaf9314078bc735d3b323f966623f8af020.1618812899.git.alistair.francis@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

target/riscv: Implementation of enhanced PMP (ePMP)

This commit adds support for ePMP v0.9.1.

The ePMP spec can be found in:
https://docs.google.com/document/d/1Mh_aiHYxemL0umN3GTTw8vsbmzHZ_nxZXgjgOUzbvc8

Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com>
Signed-off-by: Hou Weiying <weiying_hou@outlook.com>
Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: fef23b885f9649a4d54e7c98b168bdec5d297bb1.1618812899.git.alistair.francis@wdc.com
[ Changes by AF:
 - Rebase on master
 - Update to latest spec
 - Use a switch case to handle ePMP MML permissions
 - Fix a few bugs
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add ePMP CSR access functions

Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com>
Signed-off-by: Hou Weiying <weiying_hou@outlook.com>
Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 270762cb2507fba6a9eeb99a774cf49f7da9cc32.1618812899.git.alistair.francis@wdc.com
[ Changes by AF:
 - Rebase on master
 - Fix build errors
 - Fix some style issues
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

target/riscv: Add the ePMP feature

The spec is avaliable at:
https://docs.google.com/document/d/1Mh_aiHYxemL0umN3GTTw8vsbmzHZ_nxZXgjgOUzbvc8

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 28c8855c80b0388a08c3ae009f5467e2b3960ce0.1618812899.git.alistair.francis@wdc.com