bsd-user: Add RISC-V signal trampoline setup function

Implemented the 'setup_sigtramp' function for setting up the signal
trampoline code in the RISC-V architecture.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-8-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

bsd-user: Define RISC-V register structures and register copying

Added definitions for RISC-V register structures, including
general-purpose registers and floating-point registers, in
'target_arch_reg.h'. Implemented the 'target_copy_regs' function to
copy register values from the CPU state to the target register
structure, ensuring proper endianness handling using 'tswapreg'.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-7-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

bsd-user: Add RISC-V ELF definitions and hardware capability detection

Introduced RISC-V specific ELF definitions and hardware capability
detection.
Additionally, a function to retrieve hardware capabilities
('get_elf_hwcap') is implemented, which returns the common bits set in
each CPU's ISA strings.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-6-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

bsd-user: Implement RISC-V TLS register setup

Included the prototype for the 'target_cpu_set_tls' function in the
'target_arch.h' header file. This function is responsible for setting
the Thread Local Storage (TLS) register for RISC-V architecture.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-5-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

bsd-user: Implement RISC-V CPU register cloning and reset functions

Added functions for cloning CPU registers and resetting the CPU state
for RISC-V architecture.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-4-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

bsd-user: Add RISC-V CPU execution loop and syscall handling

Implemented the RISC-V CPU execution loop, including handling various
exceptions and system calls. The loop continuously executes CPU
instructions,processes exceptions, and handles system calls by invoking
FreeBSD syscall handlers.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-3-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

bsd-user: Implement RISC-V CPU initialization and main loop

Added the initial implementation for RISC-V CPU initialization and main
loop. This includes setting up the general-purpose registers and
program counter based on the provided target architecture definitions.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240916155119.14610-2-itachis@FreeBSD.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc: riscv-imsic: Fix interrupt state updates.

The IMSIC state variable eistate[] is modified by CSR instructions
within a range dedicated to the local CPU and by MMIO writes from any CPU.
Access to eistate from MMIO accessors is protected by the BQL, but
read-modify-write (RMW) sequences from CSRRW do not acquire the BQL,
making the RMW sequence vulnerable to a race condition with MMIO access
from a remote CPU.

This race can manifest as missing IPI or MSI in multi-CPU systems, eg:

[   43.008092] watchdog: BUG: soft lockup - CPU#2 stuck for 27s! [kworker/u19:1:52]
[   43.011723] CPU: 2 UID: 0 PID: 52 Comm: kworker/u19:1 Not tainted 6.11.0-rc6
[   43.013070] Workqueue: events_unbound deferred_probe_work_func
[   43.018776] [<ffffffff800b4a86>] smp_call_function_many_cond+0x190/0x5c2
[   43.019205] [<ffffffff800b4f28>] on_each_cpu_cond_mask+0x20/0x32
[   43.019447] [<ffffffff8001069a>] __flush_tlb_range+0xf2/0x190
[   43.019683] [<ffffffff80010914>] flush_tlb_kernel_range+0x20/0x28

The interrupt line raise/lower sequence was changed to prevent a race
between the evaluation of the eistate and the execution of the qemu_irq
raise/lower, ensuring that the interrupt line is not incorrectly
deactivated based on a stale topei check result. To avoid holding BQL
all modifications of eistate are converted to atomic operations.

Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a7604e4d61068ca4d384ae2a1377e1521d4d0235.1725651699.git.tjeznach@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv/cpu_helper: Fix linking problem with semihosting disabled

If QEMU has been configured with "--without-default-devices", the build
is currently failing with:

 /usr/bin/ld: libqemu-riscv32-softmmu.a.p/target_riscv_cpu_helper.c.o:
  in function `riscv_cpu_do_interrupt':
 .../qemu/target/riscv/cpu_helper.c:1678:(.text+0x2214): undefined
  reference to `do_common_semihosting'

We always want semihosting to be enabled if TCG is available, so change
the "imply" statements in the Kconfig file to "select", and make sure to
avoid calling into do_common_semihosting() if TCG is not available.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240906094858.718105-1-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv32: Fix masking of physical address

C doesn't extend the sign bit for unsigned types since there isn't a
sign bit to extend. This means a promotion of a u32 to a u64 results
in the upper 32 bits of the u64 being zero. If that result is then
used as a mask on another u64 the upper 32 bits will be cleared. rv32
physical addresses may be up to 34 bits wide, so we don't want to
clear the high bits while page aligning the address. The fix is to
use hwaddr for the mask, which, even on rv32, is 64-bits wide.

Fixes: af3fc195e3c8 ("target/riscv: Change the TLB page size depends on PMP entries.")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240909083241.43836-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target: riscv: Add Svvptc extension support

The Svvptc extension describes a uarch that does not cache invalid TLB
entries: that's the case for qemu so there is nothing particular to
implement other than the introduction of this extension.

Since qemu already exposes Svvptc behaviour, let's enable it by default
since it allows to drastically reduce the number of sfence.vma emitted
by S-mode.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240828083651.203861-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: Respect firmware ELF entry point

When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.

Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add textra matching condition for the triggers

According to RISC-V Debug specification, the optional textra32 and
textra64 trigger CSRs can be used to configure additional matching
conditions for the triggers. For example, if the textra.MHSELECT field
is set to 4 (mcontext), this trigger will only match or fire if the low
bits of mcontext/hcontext equal textra.MHVALUE field.

This commit adds the aforementioned matching condition as common trigger
matching conditions. Currently, the only legal values of textra.MHSELECT
are 0 (ignore) and 4 (mcontext). When textra.MHSELECT is 0, we pass the
checking. When textra.MHSELECT is 4, we compare textra.MHVALUE with
mcontext CSR. The remaining fields, such as textra.SBYTEMASK,
textra.SVALUE, and textra.SSELECT, are hardwired to zero for now. Thus,
we skip checking them here.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240826024657.262553-3-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Preliminary textra trigger CSR writting support

This commit allows program to write textra trigger CSR for type 2, 3, 6
triggers. In this preliminary patch, the textra.MHVALUE and the
textra.MHSELECT fields are allowed to be configured. Other fields, such
as textra.SBYTEMASK, textra.SVALUE, and textra.SSELECT, are hardwired to
zero for now.

For textra.MHSELECT field, the only legal values are 0 (ignore) and 4
(mcontext). Writing 1~3 into textra.MHSELECT will be changed to 0, and
writing 5~7 into textra.MHSELECT will be changed to 4. This behavior is
aligned to RISC-V SPIKE simulator.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240826024657.262553-2-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

util/util/cpuinfo-riscv.c: fix riscv64 build on musl libc

build fails on musl libc (alpine linux) with this error:

../util/cpuinfo-riscv.c: In function 'cpuinfo_init':
../util/cpuinfo-riscv.c:63:21: error: '__NR_riscv_hwprobe' undeclared (first use in this function); did you mean 'riscv_hwprobe'?
   63 |         if (syscall(__NR_riscv_hwprobe, &pair, 1, 0, NULL, 0) == 0
      |                     ^~~~~~~~~~~~~~~~~~
      |                     riscv_hwprobe
../util/cpuinfo-riscv.c:63:21: note: each undeclared identifier is reported only once for each function it appears in
ninja: subcommand failed

add '#include "asm/unistd.h"' to util/cpuinfo-riscv.c fixes build

Signed-off-by: Milan P. Stanić <mps@arvanta.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240905150702.2484-1-mps@arvanta.net>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv/cpu.c: Add 'fcsr' register to QEMU log as a part of F extension

FCSR is a part of F extension. Print it to log if FPU option is enabled.

Signed-off-by: Maria Klauchek <m.klauchek@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240902103433.18424-1-m.klauchek@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Stop timer with infinite timecmp

While the spec doesn't state it, setting timecmp to UINT64_MAX is
another way to stop a timer, as it's considered setting the next
timer event to occur at infinity. And, even if the time CSR does
eventually reach UINT64_MAX, the very next tick will bring it back to
zero, once again less than timecmp. For this reason
riscv_timer_write_timecmp() special cases UINT64_MAX. However, if a
previously set timecmp has not yet expired, then setting timecmp to
UINT64_MAX to disable / stop it would not work, as the special case
left the previous QEMU timer active, which would then still deliver
an interrupt at that previous timecmp time. Ensure the stopped timer
will not still deliver an interrupt by also deleting the QEMU timer
in the UINT64_MAX special case.

Fixes: ae0edf2188b3 ("target/riscv: No need to re-start QEMU timer when timecmp == UINT64_MAX")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240829084002.1805006-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv/kvm: Fix the group bit setting of AIA

Just as the hart bit setting of the AIA should be calculated as
ceil(log2(max_hart_id + 1)) the group bit setting should be
calculated as ceil(log2(max_group_id + 1)). The hart bits are
implemented by passing max_hart_id to find_last_bit() and adding
one to the result. Do the same for the group bit setting.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240821075040.498945-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target: riscv: Enable Bit Manip for OpenTitan Ibex CPU

The OpenTitan Ibex CPU now supports the the Zba, Zbb, Zbc
and Zbs bit-manipulation sub-extensions ratified in
v.1.0.0 of the RISC-V Bit- Manipulation ISA Extension, so let's enable
them in QEMU as well.

1: https://github.com/lowRISC/opentitan/pull/9748

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240823003231.3522113-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix za64rs enabling

za64rs requires priv 1.12 when enabled by priv 1.11.

This fixes annoying warning:
warning: disabling za64rs extension for hart 0x00000000 because privilege spec version does not match

on priv 1.11 CPUs.

Fixes: 68c9e54beae8 ("target/riscv: do not enable all named features by default")
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240823063431.17474-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv/tcg/tcg-cpu.c: consider MISA bit choice in implied rule

Gitlab issue [1] reports a misleading error when trying to run a 'rv64'
cpu with 'zfinx' and without 'f':

$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false
qemu-system-riscv64: Zfinx cannot be supported together with F extension

The user explicitly disabled F and the error message mentions a conflict
with Zfinx and F.

The problem isn't the error reporting, but the logic used when applying
the implied ZFA rule that enables RVF unconditionally, without honoring
user choice (i.e. keep F disabled).

Change cpu_enable_implied_rule() to check if the user deliberately
disabled a MISA bit. In this case we shouldn't either re-enable the bit
nor apply any implied rules related to it.

After this change the error message now shows:

$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false
qemu-system-riscv64: Zfa extension requires F extension

Disabling 'zfa':

$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false
qemu-system-riscv64: D extension requires F extension

And finally after disabling 'd':

$ ./build/qemu-system-riscv64 -nographic -M virt -cpu rv64,zfinx=true,f=false,zfa=false,d=false
(OpenSBI boots ...)

[1] https://gitlab.com/qemu-project/qemu/-/issues/2486

Cc: Frank Chang <frank.chang@sifive.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2486
Fixes: 047da861f9 ("target/riscv: Introduce extension implied rule helpers")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240824173338.316666-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tests/acpi: Add expected ACPI SRAT AML file for RISC-V

As per the step 5 in the process documented in bios-tables-test.c,
generate the expected ACPI SRAT AML data file for RISC-V using the
rebuild-expected-aml.sh script and update the
bios-tables-test-allowed-diff.h.

This is a new file being added for the first time. Hence, iASL diff
output is not added.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a667480203b35508038176c8ce4722370294cc57.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tests/qtest/bios-tables-test.c: Enable numamem testing for RISC-V

Add ACPI SRAT table test case for RISC-V when NUMA was enabled.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a6f7e1a4b20ff7eb199e94ca0c8aa2e6794ce5b2.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tests/acpi: Add empty ACPI SRAT data file for RISC-V

As per process documented (steps 1-3) in bios-tables-test.c, add
empty AML data file for RISC-V ACPI SRAT table and add the entry
in bios-tables-test-allowed-diff.h.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <0e30216273f2f59916bc651350578d8e8bc3a75f.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add a property to set vl to ceil(AVL/2)

RVV spec allows implementations to set vl with values within
[ceil(AVL/2),VLMAX] when VLMAX < AVL < 2*VLMAX. This commit adds a
property "rvv_vl_half_avl" to enable setting vl = ceil(AVL/2). This
behavior helps identify compiler issues and bugs.

Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20240722175004.23666-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge tag 'pull-nvme-20241001' of https://gitlab.com/birkelund/qemu into staging

nvme queue

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmb7nokACgkQTeGvMW1P
# Del+2gf/YefiiYSL540C2QeYRwMFd6xFKKWYRRJoaARyLAoqInVdLiBql527Oov8
# rgDQq+D0XXP15CNDvfAZ59a36h1bAW79QCfKEUMSbP8GPeqb5pOSRfvYJSwnG1YX
# SC70vKLOrBhzxYiQYSOhLNKdbUM00OUyf2xibu0zk84UpkXtzSR4h/byFnQIHwEV
# /uUh4+cxY6eQK1Tfk/f66FEJLuJTchFOMVswYolDMezu2vJmToWHju/kpy2ugvaC
# +WEUEti8kL66/B399u1uwAad2OejC1Jf4qMFcFQJ9Cs9RV4HTC9byolceJE+1R0V
# CZt1SxvBNdK/ihs1iTjP7fInPqdYKw==
# =16tX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Oct 2024 08:02:33 BST
# gpg:                using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [full]
# gpg:                 aka "Klaus Jensen <k.jensen@samsung.com>" [full]
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468  4272 63D5 6FC5 E55D A838
#      Subkey fingerprint: 5228 33AA 75E2 DCE6 A247  66C0 4DE1 AF31 6D4F 0DE9

* tag 'pull-nvme-20241001' of https://gitlab.com/birkelund/qemu:
  hw/nvme: add atomic write support
  hw/nvme: add knob for CTRATT.MEM
  hw/nvme: support CTRATT.MEM
  hw/nvme: clear masked events from the aer queue
  hw/nvme: report id controller metadata sgl support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvme: add atomic write support

Adds support for the controller atomic parameters: AWUN and AWUPF. Atomic
Compare and Write Unit (ACWU) is not currently supported.

Writes that adhere to the ACWU and AWUPF parameters are guaranteed to be atomic.

New NVMe QEMU Parameters (See NVMe Specification for details):
       atomic.dn (default off) - Set the value of Disable Normal.
       atomic.awun=UINT16 (default: 0)
       atomic.awupf=UINT16 (default: 0)

By default (Disable Normal set to zero), the maximum atomic write size is
set to the AWUN value.  If Disable Normal is set, the maximum atomic write
size is set to AWUPF.

Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: add knob for CTRATT.MEM

Add a boolean prop (ctratt.mem) for setting CTRATT.MEM and default it to
unset (false) to keep existing behavior of the device intact.

Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Arun Kumar <arun.kka@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

Merge tag 'pull-block-jobs-2024-09-30' of https://gitlab.com/vsementsov/qemu into staging

Block-jobs: improve backup fleecing

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmb6WsYACgkQVh8kwfGf
# eftECRAAgRFGeVSE8+fgibsHH4TixG41Rg/4gi09KZuhNHCDQXiVWlpNf4isnjcg
# K3PAZh5XSr+ClYFzbwqrjnbjGOZDJRpfb5KAnWK2GhhbBrwFBAussJ/njOg3IB3V
# 1Qtm5cc6aKrFW4dybqWW96gZZkIxFuSOW0jAjuVh4r0ZfK03Xytm5WITYg7CLnnQ
# WqnseoQuj9HvT3F2A3HnRk4tIlgEb2eWppDhX8DiW/IO4C1ScfYpyP2cvUROCCGF
# GIJKv7/GRYosSUx4nsCCx1y7ISX0A5m1sCBlWbnQmYLIaJ/JpUYA2Tqxyfy3LTRE
# IJK/NcWcR9fCy2W1hNQJaKfIKoA7EdfqSvCFQmBHrEmtRYslejNRB3PjIUzth7Oh
# knfHxKSiXyGBdikaE5a//MUBK74pc9eC9zuIvIzxdLYxBTTGKZlTuhxG28QBoLO3
# /IcPd22loEZwh6PRgcFw7olsHo9lhfbiRua8dKwj384yJKFGU4s4QghSqRLxBHjP
# xnqQrU8uE3UOIVMY9ahsMxwUzzYGbwi0vQw98qLm26vcQBZRD1C9L97M9yCCrhQ4
# jfWyMsqdODA6V3IRpIV+JBL5KvRkC1fuoAw6Oh5R2r3K/WpX74gthATna9+/wGno
# 0wPiaEvBox8y6zLKAZe4MEA6phX0tb5In6OQB2JlILHa7gds4x4=
# =LqMR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 30 Sep 2024 09:01:10 BST
# gpg:                using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>" [unknown]
# gpg:                 aka "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E  86A1 561F 24C1 F19F 79FB

* tag 'pull-block-jobs-2024-09-30' of https://gitlab.com/vsementsov/qemu:
  util/co-shared-resource: Remove unused co_try_get_from_shres
  block: Remove unused aio_task_pool_empty
  block/reqlist: allow adding overlapping requests
  backup: add minimum cluster size to performance options
  copy-before-write: allow specifying minimum cluster size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvme: support CTRATT.MEM

Indicate that 'MDTS and Size Limits Exclude Metadata (MEM)' in the
Controller Attributes (CTRATT) I/O Command Set Independent Identify
Controller Data Structure.

Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: updated commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: clear masked events from the aer queue

Clear masked events from the aer queue when get log page is issued with
RAE 0 without checking for the presence of outstanding aer requests.

Signed-off-by: Arun Kumar <arun.kka@samsung.com>
[k.jensen: remove unnecessary QTAILQ_EMPTY check]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: report id controller metadata sgl support

The controller already supports this decoding, so just set the
ID_CTRL.SGLS field accordingly.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

util/co-shared-resource: Remove unused co_try_get_from_shres

co_try_get_from_shres hasn't been used since it was added in
  55fa54a789 ("co-shared-resource: protect with a mutex")

(Everyone uses the _locked version)
Remove it.

Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240918124220.27871-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

block: Remove unused aio_task_pool_empty

aio_task_pool_empty has been unused since it was added in
  6e9b225f73 ("block: introduce aio task pool")

Remove it.

Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240917002007.330689-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

block/reqlist: allow adding overlapping requests

Allow overlapping request by removing the assert that made it
impossible. There are only two callers:

1. block_copy_task_create()

It already asserts the very same condition before calling
reqlist_init_req().

2. cbw_snapshot_read_lock()

There is no need to have read requests be non-overlapping in
copy-before-write when used for snapshot-access. In fact, there was no
protection against two callers of cbw_snapshot_read_lock() calling
reqlist_init_req() with overlapping ranges and this could lead to an
assertion failure [1].

In particular, with the reproducer script below [0], two
cbw_co_snapshot_block_status() callers could race, with the second
calling reqlist_init_req() before the first one finishes and removes
its conflicting request.

[0]:

> #!/bin/bash -e
> dd if=/dev/urandom of=/tmp/disk.raw bs=1M count=1024
> ./qemu-img create /tmp/fleecing.raw -f raw 1G
> (
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev raw,node-name=node0,file.driver=file,file.filename=/tmp/disk.raw \
> --blockdev raw,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.raw \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } }
> {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } }
> {"execute": "nbd-server-start", "arguments": {"addr": { "type": "unix", "data": { "path": "/tmp/nbd.socket" } } } }
> {"execute": "block-export-add", "arguments": {"id": "exp0", "node-name": "snap0", "type": "nbd", "name": "exp0"}}
> EOF
> ) &
> sleep 5
> while true; do
> ./qemu-nbd -d /dev/nbd0
> ./qemu-nbd -c /dev/nbd0 nbd:unix:/tmp/nbd.socket:exportname=exp0 -f raw -r
> nbdinfo --map 'nbd+unix:///exp0?socket=/tmp/nbd.socket'
> done

[1]:

> #5  0x000071e5f0088eb2 in __GI___assert_fail (...) at ./assert/assert.c:101
> #6  0x0000615285438017 in reqlist_init_req (...) at ../block/reqlist.c:23
> #7  0x00006152853e2d98 in cbw_snapshot_read_lock (...) at ../block/copy-before-write.c:237
> #8  0x00006152853e3068 in cbw_co_snapshot_block_status (...) at ../block/copy-before-write.c:304
> #9  0x00006152853f4d22 in bdrv_co_snapshot_block_status (...) at ../block/io.c:3726
> #10 0x000061528543a63e in snapshot_access_co_block_status (...) at ../block/snapshot-access.c:48
> #11 0x00006152853f1a0a in bdrv_co_do_block_status (...) at ../block/io.c:2474
> #12 0x00006152853f2016 in bdrv_co_common_block_status_above (...) at ../block/io.c:2652
> #13 0x00006152853f22cf in bdrv_co_block_status_above (...) at ../block/io.c:2732
> #14 0x00006152853d9a86 in blk_co_block_status_above (...) at ../block/block-backend.c:1473
> #15 0x000061528538da6c in blockstatus_to_extents (...) at ../nbd/server.c:2374
> #16 0x000061528538deb1 in nbd_co_send_block_status (...) at ../nbd/server.c:2481
> #17 0x000061528538f424 in nbd_handle_request (...) at ../nbd/server.c:2978
> #18 0x000061528538f906 in nbd_trip (...) at ../nbd/server.c:3121
> #19 0x00006152855a7caf in coroutine_trampoline (...) at ../util/coroutine-ucontext.c:175

Cc: qemu-stable@nongnu.org
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240712140716.517911-1-f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

backup: add minimum cluster size to performance options

In the context of backup fleecing, discarding the source will not work
when the fleecing image has a larger granularity than the one used for
block-copy operations (can happen if the backup target has smaller
cluster size), because cbw_co_pdiscard_snapshot() will align down the
discard requests and thus effectively ignore then.

To make @discard-source work in such a scenario, allow specifying the
minimum cluster size used for block-copy operations and thus in
particular also the granularity for discard requests to the source.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240711120915.310243-3-f.ebner@proxmox.com>
[vsementsov: switch version to 9.2 in QAPI doc]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

copy-before-write: allow specifying minimum cluster size

In the context of backup fleecing, discarding the source will not work
when the fleecing image has a larger granularity than the one used for
block-copy operations (can happen if the backup target has smaller
cluster size), because cbw_co_pdiscard_snapshot() will align down the
discard requests and thus effectively ignore then.

To make @discard-source work in such a scenario, allow specifying the
minimum cluster size used for block-copy operations and thus in
particular also the granularity for discard requests to the source.

The type 'size' (corresponding to uint64_t in C) is used in QAPI to
rule out negative inputs and for consistency with already existing
@cluster-size parameters. Since block_copy_calculate_cluster_size()
uses int64_t for its result, a check that the input is not too large
is added in block_copy_state_new() before calling it. The calculation
in block_copy_calculate_cluster_size() is done in the target int64_t
type.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240711120915.310243-2-f.ebner@proxmox.com>
[vsementsov: switch version to 9.2 in QAPI doc]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

Merge tag 'qemu-openbios-20240924' of https://github.com/mcayland/qemu into staging

qemu-openbios queue

# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmbzKj4eHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIf/EsH/A8mGn8gPg1oYYfR
# hN/Gw9yxMdIuJqlCaiaEHRbolDcLu9Few8vspMykEWR3HVdmFDgZ6HM2ZxvKm08g
# 4Hibd+Am3jgZF9bFfgsebQ5BNNT04cihiqSXz/jJcCEr5GbazA4aGaDfoqNvwbcA
# ZC01DFMtDrwZgiBD7UEo9x7z7CAEaF1UgThBY53H9kb9XR9KMawPl64alxs2L7tX
# Qt9w6UZZoomKBitIpxM1Fzc3Q2goe2U5aTZNuB+WlxZqKsxKF6/SL9hzo4MgF8hP
# 41lGb4TOwylKNVy9leHWi69dbqIb8TQ9ER8SxTsBYPVnJ2Ug55T34hRqSllZGxE2
# qMqbVzk=
# =YcPW
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 24 Sep 2024 22:08:14 BST
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* tag 'qemu-openbios-20240924' of https://github.com/mcayland/qemu:
  roms/openbios: update OpenBIOS images to c3a19c1e built from submodule

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-request-2024-09-25' of https://gitlab.com/thuth/qemu into staging

* Convert more Avocado tests to the new functional test framework
* Clean up assert() statements, use g_assert_not_reached() when possible
* Improve output of the gitlab CI jobs

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmbz7xgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWm6A//eVn+tzyyKCX/xdXlf7XyVpezvRpTFPOS
# HyO0WMkCf2kGmu6qYKx/fDZg86opdQzPLH2gPkuVrGOMZ0Z2630DjH0jNih8lL9Q
# J1oRX5YlU92chlzNmq59WB/j9CKd91ILtOoaPBuZkDob57yGEYVzCPqetVvF7L2+
# +rbnccrNPumGJFt035fxUGiGfgsmp28MHQzDwQdyr38uGjyNlqvqidfC8Vj1qzqP
# B7HvhGB/vkF0eHaanMt2el/ZuLKf+qeCi//F/CiXGMYnuKXyShA/Db6xvMElw1jB
# aQdwphP71IO+cxjJLaNjDHKGFstArsM/E21qlaSTBi+FTmPiwVULpVTiBmWsjhOh
# /klpdgRHf0hL2MciYKyOWgjlTocx3rEKjCTe2U5tpta9fp9CrlgMQotjDZIbohGI
# ULNahrW3Zmg4EmXDApfhYMXsQsSgWas9QSkmxzJzDp0VC7tf2Oq7RxeySrlw9MCx
# OG2qQY+rNcJ3NnpATjfAJpT1kg/IahDOCNHfLEaj1u13XVQIthVADvHwy5WxbwRP
# mwp3V9e9sUoznkM2eV646lzmkMim/WdYBF0YpT7eBs80+GoXZ0thx9IqWmwzX/ox
# rndBczVN+RY6PydJP40yljdvS7ArRT73wHqL6yKHfDpvFc4/p5mxTWwLQ3yJbXbE
# T3I+wtgfBU8=
# =FH7b
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Sep 2024 12:08:08 BST
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2024-09-25' of https://gitlab.com/thuth/qemu: (44 commits)
  .gitlab-ci.d: Make separate collapsible log sections for build and test
  .gitlab-ci.d: Split build and test in cross build job templates
  scripts/checkpatch.pl: emit error when using assert(false)
  tests/qtest: remove return after g_assert_not_reached()
  qom: remove return after g_assert_not_reached()
  qobject: remove return after g_assert_not_reached()
  migration: remove return after g_assert_not_reached()
  hw/ppc: remove return after g_assert_not_reached()
  hw/pci: remove return after g_assert_not_reached()
  hw/net: remove return after g_assert_not_reached()
  hw/hyperv: remove return after g_assert_not_reached()
  include/qemu: remove return after g_assert_not_reached()
  tcg/loongarch64: remove break after g_assert_not_reached()
  fpu: remove break after g_assert_not_reached()
  target/riscv: remove break after g_assert_not_reached()
  target/arm: remove break after g_assert_not_reached()
  hw/tpm: remove break after g_assert_not_reached()
  hw/scsi: remove break after g_assert_not_reached()
  hw/net: remove break after g_assert_not_reached()
  hw/acpi: remove break after g_assert_not_reached()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-tcg-20240922' of https://gitlab.com/rth7680/qemu into staging

target/ppc: Fix lxvx/stxvx facility check
linux-user: update syscall_nr.h to Linux v6.10
linux-user: update syscall.tbl to Linux v6.11
tcg: Fix iteration step in 32-bit gvec operation
tcg: Propagate new TCGOp to add_as_label_use
tcg/*: Do not expand cmp_vec, cmpsel_vec early
tcg/optimize: Fold movcond with true and false values identical
tcg/optimize: Optimize cmp_vec and cmpsel_vec
tcg/optimize: Optimize bitsel_vec
tcg/i386: Optimize cmpsel with constant 0 operand 3.
tcg/i386: Implement cmp_vec with avx512 insns
tcg/i386: Implement cmpsel_vec with avx512 insns
tcg/i386: Implement vector TST{EQ,NE} for avx512
tcg/ppc: Implement cmpsel_vec and optimize with constant 0/-1 arguments
tcg/s390x: Implement cmpsel_vec and optimize with constant 0/-1 arguments

# -----BEGIN PGP SIGNATURE-----
#
# iQFQBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmbwBsIdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/bzwf40V8fsRhfc8u/k2Xw
# +bXyfyX7ydgB+82YoO71+Wy15ntmYmbL/6O9kGuJXWX8HRDrAR8Js9zDgveysw5m
# m/EG+XAbVjYhjaoaaz2nfr+5auQoos9NoCji3s3UJln6sCuZ2Enl0DTFluoHZfgr
# /YVAghJ4dwH0hfzO9kmsKmJ9I19HugMMN4dNvEcjQyDDUhgGGjkUaRtGNxwuiwuf
# ArL2XhFauXgloryDmpUKQ0BJJ0t8rdPlaRJ8dHqJUnJwav0TW3QVXbrs8gOkmmbg
# 9plYTC9DlTguQobvapCDVjiGy/6yuSF/AUpcdQbTRtTi3BrzhTydfLlOtI64GtaQ
# OBKd
# =ID/g
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Sep 2024 13:00:02 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20240922' of https://gitlab.com/rth7680/qemu: (31 commits)
  linux-user: update syscall.tbl to Linux v6.11
  linux-user,loongarch: move to syscalltbl file
  linux-user,hexagon: move to syscalltbl file
  linux-user,riscv: move to syscalltbl file
  linux-user,openrisc: move to syscalltbl file
  linux-user,aarch64: move to syscalltbl file
  linux-user: update syscall.tbl to Linux v6.10
  linux-user, mips: update syscall-args-o32.c.inc to Linux v6.10
  linux-user: update syscall_nr.h to Linux v6.10
  target/ppc: Fix lxvx/stxvx facility check
  tcg/s390x: Optimize cmpsel with constant 0/-1 arguments
  tcg/s390x: Implement cmpsel_vec
  tcg/ppc: Optimize cmpsel with constant 0/-1 arguments
  tcg/ppc: Implement cmpsel_vec
  tcg/i386: Implement vector TST{EQ,NE} for avx512
  tcg/i386: Implement cmpsel_vec with avx512 insns
  tcg/i386: Add predicate parameters to tcg_out_evex_opc
  tcg/i386: Implement cmp_vec with avx512 insns
  tcg/i386: Optimize cmpsel with constant 0 operand 3.
  tcg/optimize: Optimize bitsel_vec
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'mem-2024-09-24' of https://github.com/davidhildenbrand/qemu into staging

Hi,

"Host Memory Backends" and "Memory devices" queue ("mem"):
- Kconfig fix for virtio-based memory devices
- virtio-mem support for suspend+wake-up with plugged memory
- hostmem fix when specifying "merge=off"

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmbyikMRHGRhdmlkQHJl
# ZGhhdC5jb20ACgkQTd4Q9wD/g1q6MBAAitNST73Shc+j327WvRLHQDkzkAlIYm+M
# E8NqtDiV11h7A0eNVu+5BkY/ejtY0Fduae3nxIkrHjK20eHHpiNPUp3hBNIhkKs3
# vlSaU8FLGdt58CteMGcLYsP2E32WNNTckaFGwGjDmyUEfk+Gug4r/rJAZXDfuuLV
# 083I0/MuUF+ozPA0c2MrOwhoBPerg3a5aflVpbgPwGNrT9BHMjo62Q5QzG3U7mxr
# HnlLAScSXsYg2z+d5XLXkKLAiZ4C7UN4vfUAOZwqkfs7IFUTtFO/ev6e7VZI747n
# XhAqOAKzLqPu7tBPZJIC6jwZAUIv5yM0/v5qhVvVVdu7H0ZMtSCXyvCVtnT25Rsn
# yiA+XvCOb7yQ3hRbBIi60IzjNYfWbvw+oTVIDfXkG35TeNf4ZdjWtAiUmw9s5U9Q
# z0tINsD7VlSkbh5h3PkFw1+xagIuJAVkp673HHTtQsg+xgYK2ur5jhhWJdJlnpzA
# 77CAu07UaqU39ssnC2zeGG1eNRA4uzjwQtREzqH2jMfkw/7UuUeXMF+v/fEuLn6w
# JneSMq/a0gmD42HNae0Y40cn2Akfj6+wFu1rW3djF8F6TeLUSssQhbQSHCMwGoOg
# qX7O/3SeSRzlnp3Zyx9Tr7s+BkMz0EGGDe17GQwTQUX2t5wR5iXoGqpKZgOBA8En
# 6uUIcjBUckc=
# =PExj
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 24 Sep 2024 10:45:39 BST
# gpg:                using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg:                issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [marginal]
# gpg:                 aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg:                 aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D  FCCA 4DDE 10F7 00FF 835A

* tag 'mem-2024-09-24' of https://github.com/davidhildenbrand/qemu:
  hostmem: Apply merge property after the memory region is initialized
  virtio-mem: Add support for suspend+wake-up with plugged memory
  virtio-mem: Use new Resettable framework instead of LegacyReset
  reset: Add RESET_TYPE_WAKEUP
  reset: Use ResetType for qemu_devices_reset() and MachineClass::reset()
  virtio: kconfig: memory devices are PCI only

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging

trivial patches for 2024-09-20

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEZKoqtTHVaQM2a/75gqpKJDselHgFAmbtJJUACgkQgqpKJDse
# lHjduhAAoZSS5+n2f8C4w4oboH9e5JSa6UAuVqGgju10SHm+VNgg2rQeeTD+J8uU
# vXL5lZKIb/jPNfHmsS5Q8CsuzV0M+A0wCcZJHaK5clVc1pZWMqwPPT4g4BUyjURi
# ptvQXWtTM049DDWZZXo+AHPQtko7f58EThn9fLBo/1yJe2UlBwhZwahKm3h66kkb
# aO9TI9UVt06DmXAvPBK9IfgFjYzkUJRQnLLmJDXiLx6YbuixX+J2PjKav5NtacRE
# KUArkLNfB00ouFYDOoLAnn/l+VWKIYkREeKbfQIj95BoejqAKsDztq35+oiRQbCZ
# CznKgXMIBNJCCYvKJXAoZeslE3n7Q0dlJ3RppClBjzHOiZTM46yeTofzzFot7SCN
# ERuV1WcTo53ooDvpvlP9S3d3P2i62eL5JPXgpN57Zuy7PTYQkcDq5wMTWlvm/OBy
# /hzcmIm1KHrprjf/+aNRdeCT27Rf1YD8EiTaabgtTZA4r00DrTpopAJs8ncKfbrA
# nxa8e7lNorx/PcBSJJA5iB1Q05y19eoLJcrCFMieFuG2s/oubm+bXrAuNjsSuJbS
# Lq50dIO6UIJSrV59w0CTBDrOuVXUv8/jbqRCUBMEzbXfz8mW9e8PXL+evVa8rKfk
# 6EMmDqC0/CmRrHT5uKkqTLtxcYGagdww3WIUB88UgARxydRPhu8=
# =++OB
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Sep 2024 08:30:29 BST
# gpg:                using RSA key 64AA2AB531D56903366BFEF982AA4A243B1E9478
# gpg: Good signature from "Michael Tokarev <mjt@debian.org>" [full]
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg:                 aka "Michael Tokarev <mjt@tls.msk.ru>" [full]
# Primary key fingerprint: 9D8B E14E 3F2A 9DD7 9199  28F1 61AD 3D98 ECDF 2C8E
#      Subkey fingerprint: 64AA 2AB5 31D5 6903 366B  FEF9 82AA 4A24 3B1E 9478

* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (22 commits)
  license: Update deprecated SPDX tag GPL-2.0 to GPL-2.0-only
  license: Update deprecated SPDX tag GPL-2.0+ to GPL-2.0-or-later
  license: Update deprecated SPDX tag LGPL-2.0+ to LGPL-2.0-or-later
  license: Simplify GPL-2.0-or-later license descriptions
  tests/functional: Correct typo in test_netdev_ethtool.py SPDX tag
  tests/bench: Rename test_akcipher_keys.inc -> test_akcipher_keys.c.inc
  target/hexagon: Rename macros.inc -> macros.h.inc
  tests/functional: Put the or1k_sim test into the slow category
  tests/qemu-iotests/testenv: Use the "r2d" machine for sh4/sh4eb
  tests/qemu-iotests/testenv: Use the "virt" machine for or1k
  util/cutils: Remove unused qemu_get_exec_dir
  hw/sysbus: Remove unused sysbus_mmio_unmap
  envlist: Remove unused envlist_parse
  hw/display: Fix mirrored output in dm163
  hw/virtio/Kconfig: Include vhost-user-scmi only on arm targets
  tests/unit: Really build pbkdf test on macOS
  hw/loongarch/virt: Add description for virt machine type
  hw/mips/jazz: fix typo in in-built NIC alias
  ppc: fix incorrect spelling of PowerMac
  linux-user/syscall.c: eliminate other explicit LFS usages
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

.gitlab-ci.d: Make separate collapsible log sections for build and test

GitLab lets a CI job create its own collapsible log sections by
emitting special escape codes, as documented here:

https://docs.gitlab.com/ee/ci/yaml/script.html#expand-and-collapse-job-log-sections

Use these to make "configure", "build" and "test" separate
collapsible stages.

As recommended by the GitLab docs, we use some shell which is
sourced in the CI job to define functions to emit the magic
lines that start and end sections, to hide the ugliness of
the printf lines from the log.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240918125449.3125571-3-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

.gitlab-ci.d: Split build and test in cross build job templates

In the native_build_job_template we have separate steps in the script
for the build and the test steps.  This is helpful because then
gitlab will give separate timestamps in the log view for each, and
you can see how long it took to compile vs how long to test.  In the
templates in crossbuild-template.yml, however, we do both the build
and test in a single 'make' invocation, and so we don't get the
separate timing information.

Split the build and test, in the same way we do in the native build
template.

This will also give us a place to separate out how parallel we want
to do the build by default from how parallel we want to do the tests
by default, which might be helpful in future.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240918125449.3125571-2-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

scripts/checkpatch.pl: emit error when using assert(false)

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-35-pierrick.bouvier@linaro.org>
[thuth: Split long line to avoid checkpatch error]
Signed-off-by: Thomas Huth <thuth@redhat.com>

roms/openbios: update OpenBIOS images to c3a19c1e built from submodule

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

tests/qtest: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-34-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qom: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-33-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qobject: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-32-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

migration: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240919044641.386068-31-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/ppc: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-30-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/pci: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-29-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/net: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-28-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/hyperv: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-27-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

include/qemu: remove return after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-26-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tcg/loongarch64: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-25-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

fpu: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-24-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/riscv: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-23-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/arm: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-22-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/tpm: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-21-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/scsi: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-20-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/net: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-19-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/acpi: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-18-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-17-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

accel/tcg: remove break after g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-16-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/i386/kvm: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240919044641.386068-15-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

migration: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-14-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/ppc: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-13-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/pci: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-12-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/nvme: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-11-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/net: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-10-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/hyperv: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-9-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block: replace assert(false) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-8-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/ppc: replace assert(0) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-7-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qobject: replace assert(0) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-6-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

migration: replace assert(0) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240919044641.386068-5-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/net: replace assert(0) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-4-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/arm: replace assert(0) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-3-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/acpi: replace assert(0) with g_assert_not_reached()

This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-2-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional: Convert the powernv tests from boot_linux_console.py

Move the tests into the already existing test_ppc64_powernv.py
file.

Message-ID: <20240920150319.81723-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional: Convert the r2d sh4 Avocado test

This is the last test that is using the do_test_advcal_2018()
function, so we can now remove that function from boot_linux_console.py,
too.

Message-ID: <20240919185749.71222-8-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional: Convert the mac ppc Avocado tests

The g3beige and mac99 tests use the same asset, so put them together
in a new test_ppc_mac.py file.

Message-ID: <20240919185749.71222-7-thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional: Convert the e500 ppc64 Avocado test

Use the new launch_kernel function to convert this test in a simple way.

Message-ID: <20240919185749.71222-6-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional: Convert the SPARCStation Avocado test

Use the new launch_kernel function to convert this test in a simple way.

Message-ID: <20240919185749.71222-5-thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional: Convert the xtensa lx60 Avocado test

Use the new launch_kernel function to convert this test in a simple way.

Message-ID: <20240919185749.71222-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional: Convert the vexpressa9 Avocado test

Use the new launch_kernel function to convert this test in a simple way.

Message-ID: <20240919185749.71222-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/functional/qemu_test: Add a function for launching kernels more easily

The task for launching a kernel is quite repetitive: Set the serial
console, set the -kernel and maybe -initrd and -dtb parameters,
launch the VM and then wait for the expected console output. So
it's easier in some tests to provide these steps via a separate
function.

Message-ID: <20240919185749.71222-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hostmem: Apply merge property after the memory region is initialized

The semantic change has been introduced by commit 5becdc0ab0 ("hostmem:
simplify the code for merge and dump properties") even it clarifies that
no senmatic change has been introduced. After the commit, the merge
property can be applied even the corresponding memory region isn't
initialized yet. This leads to crash dump by the following command
lines.

  # /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64  \
    -accel kvm  -machine virt -cpu host                      \
    -object memory-backend-ram,id=mem-memN0,size=4096M,merge=off
    :
    qemu-system-aarch64: ../system/memory.c:2419: memory_region_get_ram_ptr: \
    Assertion `mr->ram_block' failed.

Fix it by applying the merge property only when the memory region is
initialized.

Message-ID: <20240915233117.478169-1-gshan@redhat.com>
Fixes: 5becdc0ab083 ("hostmem: simplify the code for merge and dump properties")
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

virtio-mem: Add support for suspend+wake-up with plugged memory

Before, the virtio-mem device would unplug all the memory with any reset
of the device, including during the wake-up of the guest from a
suspended state. Due to this, the virtio-mem driver in the Linux kernel
disallowed suspend-to-ram requests in the guest when the
VIRTIO_MEM_F_PERSISTENT_SUSPEND feature is not exposed by QEMU.

This patch adds the code to skip the reset on wake-up and exposes
theVIRTIO_MEM_F_PERSISTENT_SUSPEND feature to the guest kernel driver
when suspending is possible in QEMU (currently only x86).

Message-ID: <20240904103722.946194-5-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

virtio-mem: Use new Resettable framework instead of LegacyReset

LegacyReset does not pass ResetType to the reset callback method, which
the new Resettable framework uses. Due to this, virtio-mem cannot use
the new RESET_TYPE_WAKEUP to skip the reset during wake-up from a
suspended state.

This patch adds overrides Resettable interface methods in VirtIOMEMClass
to use the new Resettable framework and replaces
qemu_[un]register_reset() calls with qemu_[un]register_resettable().

Message-ID: <20240904103722.946194-4-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

reset: Add RESET_TYPE_WAKEUP

Some devices need to distinguish cold start reset from waking up from a
suspended state. This patch adds new value to the enum, and updates the
i386 wakeup method to use this new reset type.

Message-ID: <20240904103722.946194-3-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

reset: Use ResetType for qemu_devices_reset() and MachineClass::reset()

Currently, both qemu_devices_reset() and MachineClass::reset() use
ShutdownCause for the reason of the reset. However, the Resettable
interface uses ResetState, so ShutdownCause needs to be translated to
ResetType somewhere. Translating it qemu_devices_reset() makes adding
new reset types harder, as they cannot always be matched to a single
ShutdownCause here, and devices may need to check the ResetType to
determine what to reset and if to reset at all.

This patch moves this translation up in the call stack to
qemu_system_reset() and updates all MachineClass children to use the
ResetType instead.

Message-ID: <20240904103722.946194-2-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

virtio: kconfig: memory devices are PCI only

Virtio memory devices rely on PCI BARs to expose the contents of memory.
Because of this they cannot be used (yet) with virtio-mmio or virtio-ccw.
In fact the code that is common to virtio-mem and virtio-pmem, which
is in hw/virtio/virtio-md-pci.c, is only included if CONFIG_VIRTIO_PCI
is set.  Reproduce the same condition in the Kconfig file, only allowing
VIRTIO_MEM and VIRTIO_PMEM to be defined if the transport supports it.

Without this patch it is possible to create a configuration with
CONFIG_VIRTIO_PCI=n and CONFIG_VIRTIO_MEM=y, but that causes a
linking failure.

Message-ID: <20240906101658.514470-1-pbonzini@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>

linux-user: update syscall.tbl to Linux v6.11

Updated running scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-7-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user,loongarch: move to syscalltbl file

Since kernel v6.11 loongarch has moved from syscall_nr.h file
to syscall.tbl (26a3b85bac08 ("loongarch: convert to generic syscall
table"))

Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh

Remove scripts/gensyscalls.sh that is now useless.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-6-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user,hexagon: move to syscalltbl file

Since kernel v6.11 hexagon has moved from syscall_nr.h file
to syscall.tbl (36d69c29759e ("hexagon: use new system call table"))

Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-5-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user,riscv: move to syscalltbl file

Since kernel v6.11 riscv has moved from syscall_nr.h file
to syscall.tbl (3db80c999deb ("riscv: convert to generic syscall
table"))

Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user,openrisc: move to syscalltbl file

Since kernel v6.11 openrisc has moved from syscall_nr.h file
to syscall.tbl (See 77122bf9e3df ("openrisc: convert to generic syscall
table"))

Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user,aarch64: move to syscalltbl file

Since kernel v6.11 aarch64 has moved from syscall_nr.h file
to syscall_64.tbl (See e632bca07c8e ("arm64: generate 64-bit
syscall.tbl"))

Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall_64.tbl instead of syscall_nr.h.
New syscall_64.tbl is imported from linux v6.11 using
updated scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-2-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: update syscall.tbl to Linux v6.10

Updated running scripts/update-syscalltbl.sh

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240918074256.720617-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>