Merge remote-tracking branch 'remotes/alistair23/tags/pull-riscv-to-apply-20211029-1' into staging

Fifth RISC-V PR for QEMU 6.2

 - Use a shared PLIC config helper function
 - Fixup the OpenTitan PLIC configuration
 - Add support for the experimental J extension
 - Update the fmin/fmax handling
 - Fixup VS interrupt forwarding

# gpg: Signature made Fri 29 Oct 2021 12:03:47 AM PDT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]

* remotes/alistair23/tags/pull-riscv-to-apply-20211029-1:
  target/riscv: change the api for RVF/RVD fmin/fmax
  softfloat: add APIs to handle alternative sNaN propagation for fmax/fmin
  target/riscv: remove force HS exception
  target/riscv: fix VS interrupts forwarding to HS
  target/riscv: Allow experimental J-ext to be turned on
  target/riscv: Implement address masking functions required for RISC-V Pointer Masking extension
  target/riscv: Support pointer masking for RISC-V for i/c/f/d/a types of instructions
  target/riscv: Print new PM CSRs in QEMU logs
  target/riscv: Add J extension state description
  target/riscv: Support CSRs required for RISC-V PM extension except for the h-mode
  target/riscv: Add CSR defines for RISC-V PM extension
  target/riscv: Add J-extension into RISC-V
  hw/riscv: opentitan: Fixup the PLIC context addresses
  hw/riscv: virt: Use the PLIC config helper function
  hw/riscv: microchip_pfsoc: Use the PLIC config helper function
  hw/riscv: sifive_u: Use the PLIC config helper function
  hw/riscv: boot: Add a PLIC config string function
  hw/riscv: virt: Don't use a macro for the PLIC configuration

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20211028' into staging

Improvements to qemu/int128
Fixes for 128/64 division.
Cleanup tcg/optimize.c
Optimize redundant sign extensions

# gpg: Signature made Thu 28 Oct 2021 09:06:00 PM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* remotes/rth/tags/pull-tcg-20211028: (60 commits)
  softmmu: fix for "after access" watchpoints
  softmmu: remove useless condition in watchpoint check
  softmmu: fix watchpoint processing in icount mode
  tcg/optimize: Propagate sign info for shifting
  tcg/optimize: Propagate sign info for bit counting
  tcg/optimize: Propagate sign info for setcond
  tcg/optimize: Propagate sign info for logical operations
  tcg/optimize: Optimize sign extensions
  tcg/optimize: Use fold_xx_to_i for rem
  tcg/optimize: Use fold_xi_to_x for div
  tcg/optimize: Use fold_xi_to_x for mul
  tcg/optimize: Use fold_xx_to_i for orc
  tcg/optimize: Stop forcing z_mask to "garbage" for 32-bit values
  tcg: Extend call args using the correct opcodes
  tcg/optimize: Sink commutative operand swapping into fold functions
  tcg/optimize: Expand fold_addsub2_i32 to 64-bit ops
  tcg/optimize: Expand fold_mulu2_i32 to all 4-arg multiplies
  tcg/optimize: Split out fold_masks
  tcg/optimize: Split out fold_ix_to_i
  tcg/optimize: Split out fold_xi_to_x
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: change the api for RVF/RVD fmin/fmax

The sNaN propagation behavior has been changed since cd20cee7 in
https://github.com/riscv/riscv-isa-manual.

In Priv spec v1.10, RVF is v2.0. fmin.s and fmax.s are implemented with
IEEE 754-2008 minNum and maxNum operations.

In Priv spec v1.11, RVF is v2.2. fmin.s and fmax.s are amended to
implement IEEE 754-2019 minimumNumber and maximumNumber operations.

Therefore, to prevent the risk of having too many version variables.
Instead of introducing an extra *fext_ver* variable, we tie RVF version
to Priv version. Though it's not completely accurate but is close enough.

Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211021160847.2748577-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

softfloat: add APIs to handle alternative sNaN propagation for fmax/fmin

For "fmax/fmin ft0, ft1, ft2" and if one of the inputs is sNaN,

  The original logic:
    Return NaN and set invalid flag if ft1 == sNaN || ft2 == sNan.

  The alternative path:
    Set invalid flag if ft1 == sNaN || ft2 == sNaN.
    Return NaN only if ft1 == NaN && ft2 == NaN.

The IEEE 754 spec allows both implementation and some architecture such
as riscv choose different defintions in two spec versions.
(riscv-spec-v2.2 use original version, riscv-spec-20191213 changes to
 alternative)

Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211021160847.2748577-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: remove force HS exception

There is no need to "force an hs exception" as the current privilege
level, the state of the global ie and of the delegation registers should
be enough to route the interrupt to the appropriate privilege level in
riscv_cpu_do_interrupt. The is true for both asynchronous and
synchronous exceptions, specifically, guest page faults which must be
hardwired to zero hedeleg. As such the hs_force_except mechanism can be
removed.

Signed-off-by: Jose Martins <josemartins90@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211026145126.11025-3-josemartins90@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix VS interrupts forwarding to HS

VS interrupts (2, 6, 10) were not correctly forwarded to hs-mode when
not delegated in hideleg (which was not being taken into account). This
was mainly because hs level sie was not always considered enabled when
it should. The spec states that "Interrupts for higher-privilege modes,
y>x, are always globally enabled regardless of the setting of the global
yIE bit for the higher-privilege mode." and also "For purposes of
interrupt global enables, HS-mode is considered more privileged than
VS-mode, and VS-mode is considered more privileged than VU-mode". Also,
vs-level interrupts were not being taken into account unless V=1, but
should be unless delegated.

Finally, there is no need for a special case for to handle vs interrupts
as the current privilege level, the state of the global ie and of the
delegation registers should be enough to route all interrupts to the
appropriate privilege level in riscv_cpu_do_interrupt.

Signed-off-by: Jose Martins <josemartins90@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211026145126.11025-2-josemartins90@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20211028' into staging

Followup to replace more tcg_const_* with tcg_constant_tl*
Fix bug to delay writes to USR until packet commit

# gpg: Signature made Thu 28 Oct 2021 08:59:24 PM PDT
# gpg:                using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* remotes/quic/tags/pull-hex-20211028:
  Hexagon (target/hexagon) put writes to USR into temp until commit
  Hexagon (target/hexagon) more tcg_constant_*

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softmmu: fix for "after access" watchpoints

Watchpoints that should fire after the memory access
break an execution of the current block, try to
translate current instruction into the separate block,
which then causes debug interrupt.
But cpu_interrupt can't be called in such block when
icount is enabled, because interrupts muse be allowed
explicitly.
This patch sets CF_LAST_IO flag for retranslated block,
allowing interrupt request for the last instruction.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <163542169727.2127597.8141772572696627329.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softmmu: remove useless condition in watchpoint check

cpu_check_watchpoint function checks cpu->watchpoint_hit at the entry.
But then it also does the same in the middle of the function,
while this field can't change.
That is why this patch removes this useless condition.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <163542169094.2127597.8801843697434113110.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softmmu: fix watchpoint processing in icount mode

Watchpoint processing code restores vCPU state twice:
in tb_check_watchpoint and in cpu_loop_exit_restore/cpu_restore_state.
Normally it does not affect anything, but in icount mode instruction
counter is incremented twice and becomes incorrect.
This patch eliminates unneeded CPU state restore.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <163542168516.2127597.8781375223437124644.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Propagate sign info for shifting

For constant shifts, we can simply shift the s_mask.

For variable shifts, we know that sar does not reduce
the s_mask, which helps for sequences like

    ext32s_i64  t, in
    sar_i64     t, t, v
    ext32s_i64  out, t

allowing the final extend to be eliminated.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Propagate sign info for bit counting

The results are generally 6 bit unsigned values, though
the count leading and trailing bits may produce any value
for a zero input.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Propagate sign info for setcond

The result is either 0 or 1, which means that we have
a 2 bit signed result, and thus 62 bits of sign.
For clarity, use the smask_from_zmask function.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Propagate sign info for logical operations

Sign repetitions are perforce all identical, whether they are 1 or 0.
Bitwise operations preserve the relative quantity of the repetitions.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Optimize sign extensions

Certain targets, like riscv, produce signed 32-bit results.
This can lead to lots of redundant extensions as values are
manipulated.

Begin by tracking only the obvious sign-extensions, and
converting them to simple copies when possible.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Use fold_xx_to_i for rem

Recognize the constant function for remainder.

Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Use fold_xi_to_x for div

Recognize the identity function for division.

Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Use fold_xi_to_x for mul

Recognize the identity function for low-part multiply.

Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Use fold_xx_to_i for orc

Recognize the constant function for or-complement.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Stop forcing z_mask to "garbage" for 32-bit values

This "garbage" setting pre-dates the addition of the type
changing opcodes INDEX_op_ext_i32_i64, INDEX_op_extu_i32_i64,
and INDEX_op_extr{l,h}_i64_i32.

So now we have a definitive points at which to adjust z_mask
to eliminate such bits from the 32-bit operands.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Extend call args using the correct opcodes

Pretending that the source is i64 when it is in fact i32 is
incorrect; we have type-changing opcodes that must be used.
This bug trips up the subsequent change to the optimizer.

Fixes: 4f2331e5b67a
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) put writes to USR into temp until commit

Change SET_USR_FIELD to write to hex_new_value[HEX_REG_USR] instead
of hex_gpr[HEX_REG_USR].

Then, we need code to mark the instructions that can set implicitly
set USR
- Macros added to hex_common.py
- A_FPOP added in translate.c

Test case added in tests/tcg/hexagon/overflow.c

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>

Hexagon (target/hexagon) more tcg_constant_*

Change additional tcg_const_tl to tcg_constant_tl

Note that gen_pred_cancal had slot_mask initialized with tcg_const_tl.
However, it is not constant throughout, so we initialize it with
tcg_temp_new and replace the first use with the constant value.

Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Inspired-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>

target/riscv: Allow experimental J-ext to be turned on

Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211025173609.2724490-9-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Implement address masking functions required for RISC-V Pointer Masking extension

Signed-off-by: Anatoly Parshintsev <kupokupokupopo@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-8-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Support pointer masking for RISC-V for i/c/f/d/a types of instructions

Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-7-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Print new PM CSRs in QEMU logs

Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-6-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add J extension state description

Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-5-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Support CSRs required for RISC-V PM extension except for the h-mode

Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-4-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add CSR defines for RISC-V PM extension

Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211025173609.2724490-3-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add J-extension into RISC-V

Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211025173609.2724490-2-space.monkey.delivers@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: opentitan: Fixup the PLIC context addresses

Fixup the PLIC context address to correctly support the threshold and
claim register.

Fixes: ef63100648 ("hw/riscv: opentitan: Update to the latest build")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211025040657.262696-1-alistair.francis@opensource.wdc.com

hw/riscv: virt: Use the PLIC config helper function

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-5-alistair.francis@opensource.wdc.com

hw/riscv: microchip_pfsoc: Use the PLIC config helper function

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-4-alistair.francis@opensource.wdc.com

hw/riscv: sifive_u: Use the PLIC config helper function

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-3-alistair.francis@opensource.wdc.com

hw/riscv: boot: Add a PLIC config string function

Add a generic function that can create the PLIC strings.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-2-alistair.francis@opensource.wdc.com

hw/riscv: virt: Don't use a macro for the PLIC configuration

Using a macro for the PLIC configuration doesn't make the code any
easier to read. Instead it makes it harder to figure out what is going
on, so let's remove it.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211022060133.3045020-1-alistair.francis@opensource.wdc.com

tcg/optimize: Sink commutative operand swapping into fold functions

Most of these are handled by creating a fold_const2_commutative
to handle all of the binary operators.  The rest were already
handled on a case-by-case basis in the switch, and have their
own fold function in which to place the call.

We now have only one major switch on TCGOpcode.

Introduce NO_DEST and a block comment for swap_commutative in
order to make the handling of brcond and movcond opcodes cleaner.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Expand fold_addsub2_i32 to 64-bit ops

Rename to fold_addsub2.
Use Int128 to implement the wider operation.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Expand fold_mulu2_i32 to all 4-arg multiplies

Rename to fold_multiply2, and handle muls2_i32, mulu2_i64,
and muls2_i64.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_masks

Move all of the known-zero optimizations into the per-opcode
functions.  Use fold_masks when there is a possibility of the
result being determined, and simply set ctx->z_mask otherwise.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_ix_to_i

Pull the "op r, 0, b => movi r, 0" optimization into a function,
and use it in fold_shift.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_xi_to_x

Pull the "op r, a, i => mov r, a" optimization into a function,
and use them in the outer-most logical operations.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_sub_to_neg

Even though there is only one user, place this more complex
conversion into its own helper.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_to_not

Split out the conditional conversion from a more complex logical
operation to a simple NOT.  Create a couple more helpers to make
this easy for the outer-most logical operations.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Add type to OptContext

Compute the type of the operation early.

There are at least 4 places that used a def->flags ladder
to determine the type of the operation being optimized.

There were two places that assumed !TCG_OPF_64BIT means
TCG_TYPE_I32, and so could potentially compute incorrect
results for vector operations.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_xi_to_i

Pull the "op r, a, 0 => movi r, 0" optimization into a function,
and use it in the outer opcode fold functions.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_xx_to_x

Pull the "op r, a, a => mov r, a" optimization into a function,
and use it in the outer opcode fold functions.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_xx_to_i

Pull the "op r, a, a => movi r, 0" optimization into a function,
and use it in the outer opcode fold functions.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_mov

This is the final entry in the main switch that was in a
different form.  After this, we have the option to convert
the switch into a function dispatch table.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_dup, fold_dup2

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_bswap

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_count_zeros

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_deposit

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_extract, fold_sextract

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_extract2

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_movcond

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_addsub2_i32

Add two additional helpers, fold_add2_i32 and fold_sub2_i32
which will not be simple wrappers forever.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_mulu2_i32

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_setcond

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_brcond

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_brcond2

Reduce some code duplication by folding the NE and EQ cases.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_setcond2

Reduce some code duplication by folding the NE and EQ cases.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_const{1,2}

Split out a whole bunch of placeholder functions, which are
currently identical.  That won't last as more code gets moved.

Use CASE_32_64_VEC for some logical operators that previously
missed the addition of vectors.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_mb, fold_qemu_{ld,st}

This puts the separate mb optimization into the same framework
as the others.  While fold_qemu_{ld,st} are currently identical,
that won't last as more code gets moved.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Use a boolean to avoid a mass of continues

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out finish_folding

Copy z_mask into OptContext, for writeback to the
first output within the new function.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Return true from tcg_opt_gen_{mov,movi}

This will allow callers to tail call to these functions
and return true indicating processing complete.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Change fail return for do_constant_folding_cond*

Return -1 instead of 2 for failure, so that we can
use comparisons against 0 for all cases.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Drop nb_oargs, nb_iargs locals

Rather than try to keep these up-to-date across folding,
re-read nb_oargs at the end, after re-reading the opcode.

A couple of asserts need dropping, but that will take care
of itself as we split the function further.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out fold_call

Calls are special in that they have a variable number
of arguments, and need to be able to clobber globals.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out copy_propagate

Continue splitting tcg_optimize.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out init_arguments

There was no real reason for calls to have separate code here.
Unify init for calls vs non-calls using the call path, which
handles TCG_CALL_DUMMY_ARG.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Move prev_mb into OptContext

This will expose the variable to subroutines that
will be broken out of tcg_optimize.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Change tcg_opt_gen_{mov,movi} interface

Adjust the interface to take the OptContext parameter instead
of TCGContext or both.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Remove do_default label

Break the final cleanup clause out of the main switch
statement.  When fully folding an opcode to mov/movi,
use "continue" to process the next opcode, else break
to fall into the final cleanup.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Split out OptContext

Provide what will become a larger context for splitting
the very large tcg_optimize function.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/optimize: Rename "mask" to "z_mask"

Prepare for tracking different masks by renaming this one.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

host-utils: add unit tests for divu128/divs128

Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211025191154.350831-5-luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

host-utils: add 128-bit quotient support to divu128/divs128

These will be used to implement new decimal floating point
instructions from Power ISA 3.1.

The remainder is now returned directly by divu128/divs128,
freeing up phigh to receive the high 64 bits of the quotient.

Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211025191154.350831-4-luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

host-utils: move udiv_qrnnd() to host-utils

Move udiv_qrnnd() from include/fpu/softfloat-macros.h to host-utils,
so it can be reused by divu128().

Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211025191154.350831-3-luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

host-utils: move checks out of divu128/divs128

In preparation for changing the divu128/divs128 implementations
to allow for quotients larger than 64 bits, move the div-by-zero
and overflow checks to the callers.

Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211025191154.350831-2-luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/int128: Add int128_{not,xor}

Addition of not and xor on 128-bit integers.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Message-Id: <20211025122818.168890-3-frederic.petrot@univ-grenoble-alpes.fr>
[rth: Split out logical operations.]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20211027' into staging

9pfs: performance fix and cleanup

* First patch fixes suboptimal I/O performance on guest due to previously
  incorrect block size being transmitted to 9p client.

* Subsequent patches are cleanup ones intended to reduce code complexity.

* remotes/cschoenebeck/tags/pull-9p-20211027:
  9pfs: use P9Array in v9fs_walk()
  9pfs: make V9fsPath usable via P9Array API
  9pfs: make V9fsString usable via P9Array API
  fsdev/p9array.h: check scalar type in P9ARRAY_NEW()
  9pfs: introduce P9Array
  9pfs: simplify blksize_to_iounit()
  9pfs: deduplicate iounit code
  9pfs: fix wrong I/O block size in Rgetattr

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-10-27' into staging

QAPI patches patches for 2021-10-27

# gpg: Signature made Wed 27 Oct 2021 08:21:54 AM PDT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]

* remotes/armbru/tags/pull-qapi-2021-10-27:
  qapi: Implement deprecated-input={reject,crash} for enum values
  qapi: Move compat policy from QObject to generic visitor
  qapi: Add feature flags to enum members
  qapi: Enable enum member introspection to show more than name
  qapi: Improve input_type_enum()'s error message

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qapi: Implement deprecated-input={reject,crash} for enum values

This copies the code implementing the policy from qapi/qmp-dispatch.c
to qapi/qobject-input-visitor.c.  Tolerable, but if we acquire more
copies, we should look into factoring them out.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20211025042405.3762351-5-armbru@redhat.com>

qapi: Move compat policy from QObject to generic visitor

The next commit needs to access compat policy from the generic visitor
core.  Move it there from qobject input and output visitor.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211025042405.3762351-4-armbru@redhat.com>

qapi: Add feature flags to enum members

This is quite similar to commit 84ab008687 "qapi: Add feature flags to
struct members", only for enums instead of structs.

Special feature flag 'deprecated' is silently ignored there.  This is
okay only because it will be implemented shortly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211025042405.3762351-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>

qapi: Enable enum member introspection to show more than name

The next commit will add feature flags to enum members.  There's a
problem, though: query-qmp-schema shows an enum type's members as an
array of member names (SchemaInfoEnum member @values).  If it showed
an array of objects with a name member, we could simply add more
members to these objects.  Since it's just strings, we can't.

I can see three ways to correct this design mistake:

1. Do it the way we should have done it, plus compatibility goo.

   We want a ['SchemaInfoEnumMember'] member in SchemaInfoEnum.  Since
   changing @values would be a compatibility break, add a new member
   @members instead.

   @values is now redundant.  In my testing, output of
   qemu-system-x86_64's query-qmp-schema grows by 11% (18.5KiB).

   We can deprecate @values now and drop it later.  This will break
   outmoded clients.  Well-behaved clients such as libvirt are
   expected to break cleanly.

2. Like 1, but omit "boring" elements of @member, and empty @member.

   @values does not become redundant.  @members augments it.  Somewhat
   cumbersome, but output of query-qmp-schema grows only as we make
   enum members non-boring.

   There is nothing to deprecate here.

3. Versioned query-qmp-schema.

   query-qmp-schema provides either @values or @members.  The QMP
   client can select which version it wants.  There is no redundant
   output.

   We can deprecate old versions and eventually drop them.  This will
   break outmoded clients.  Breaking cleanly is easier than for 1.

   While 1 and 2 operate within the common rules for compatible
   evolution apply (section "Compatibility considerations" in
   docs/devel/qapi-code-gen.rst), 3 bypasses them.  Attractive when
   operating within the rules is just too awkward.  Not the case here.

This commit implements 1.  Libvirt developers prefer it.

Deprecate @values in favour of @members.  Since query-qmp-schema
compatibility is pretty fundamental for management applications, an
extended grace period is advised.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20211025042405.3762351-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>

qapi: Improve input_type_enum()'s error message

The error message claims the parameter is invalid:

    $ qemu-system-x86_64 -object qom-type=nonexistent
    qemu-system-x86_64: -object qom-type=nonexistent: Invalid parameter 'nonexistent'

What's wrong is actually the *value* 'nonexistent'.  Improve the
message to

    qemu-system-x86_64: -object qom-type=nonexistent: Parameter 'qom-type' does not accept value 'nonexistent'

Fixes: https://gitlab.com/qemu-project/qemu/-/issues/608
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211020180231.434071-1-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>

9pfs: use P9Array in v9fs_walk()

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <90c65d1c1ca11c1b434bb981b1fc7966f7711c8f.1633097129.git.qemu_oss@crudebyte.com>

9pfs: make V9fsPath usable via P9Array API

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <79a0ddf8375f6c95f0565ef155a1bf1e9387664f.1633097129.git.qemu_oss@crudebyte.com>

9pfs: make V9fsString usable via P9Array API

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <ce9f7a0a63585dc27f4545c485109efbec1251da.1633097129.git.qemu_oss@crudebyte.com>

fsdev/p9array.h: check scalar type in P9ARRAY_NEW()

Make sure at compile time that the scalar type of the array
requested to be created via P9ARRAY_NEW() matches the scalar
type of the passed auto reference variable (unique pointer).

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <c1965e2a096835dc9e1d4d659dfb15d96755cbe0.1633097129.git.qemu_oss@crudebyte.com>

9pfs: introduce P9Array

Implements deep auto free of arrays while retaining common C-style
squared bracket access. Main purpose of this API is to get rid of
error prone individual array deallocation pathes in user code, i.e.
turning something like this:

  void doSomething(size_t n) {
      Foo *foos = malloc(n * sizeof(Foo));
      for (...) {
          foos[i].s = malloc(...);
          if (...) {
              goto out;
          }
      }
  out:
      if (...) {
          for (...) {
              /* deep deallocation */
              free(foos[i].s);
          }
          /* array deallocation */
          free(foos);
      }
  }

into something more simple and safer like:

  void doSomething(size_t n) {
      P9ARRAY_REF(Foo) foos = NULL;
      P9ARRAY_NEW(Foo, foos, n);
      for (...) {
          foos[i].s = malloc(...);
          if (...) {
              return; /* array auto freed here */
          }
      }
      /* array auto freed here */
  }

Unlike GArray, P9Array does not require special macros, function
calls or struct member dereferencing to access the individual array
elements:

  C-array = P9Array:   vs.  GArray:

  for (...) {           |   for (...) {
      ... = arr[i].m;   |       ... = g_array_index(arr, Foo, i).m;
      arr[i].m = ... ;  |       g_array_index(arr, Foo, i).m = ... ;
  }                     |   }

So existing C-style array code can be retained with only very little
changes; basically limited to replacing array allocation call and of
course removing individual array deallocation pathes.

In this initial version P9Array only supports the concept of unique
pointers, i.e. it does not support reference counting. The array (and
all dynamically allocated memory of individual array elements) is auto
freed once execution leaves the scope of the reference variable (unique
pointer) associated with the array.

Internally a flex array struct is used in combination with macros
spanned over a continuous memory space for both the array's meta data
(private) and the actual C-array user data (public):

  struct P9Array##scalar_type {
    size_t len;            /* private, hidden from user code */
    scalar_type first[];   /* public, directly exposed to user code */
  };

Which has the advantage that the compiler automatically takes care
about correct padding, alignment and overall size for all scalar data
types on all systems and that the user space exposed pointer can
directly be translated back and forth between user space C-array
pointer and internal P9Array struct whenever needed, in a type-safe
manner.

This header file is released under MIT license, to allow this file
being used in other C-projects as well. The common QEMU license
GPL2+ might have construed a conflict for other projects.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <a954ef47b5ac26085a16c5c2aec8695374e0424d.1633097129.git.qemu_oss@crudebyte.com>

9pfs: simplify blksize_to_iounit()

Use QEMU_ALIGN_DOWN() macro to reduce code and to make it
more human readable.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <b84eb324d2ebdcc6f9c442c97b5b4d01eecb4f43.1632758315.git.qemu_oss@crudebyte.com>

9pfs: deduplicate iounit code

Remove redundant code that translates host fileystem's block
size into 9p client (guest side) block size.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <129bb71d5119e61d335f1e3107e472e4beea223a.1632758315.git.qemu_oss@crudebyte.com>

9pfs: fix wrong I/O block size in Rgetattr

When client sent a 9p Tgetattr request then the wrong I/O block
size value was returned by 9p server; instead of host file
system's I/O block size it should rather return an I/O block
size according to 9p session's 'msize' value, because the value
returned to client should be an "optimum" block size for I/O
(i.e. to maximize performance), it should not reflect the actual
physical block size of the underlying storage media.

The I/O block size of a host filesystem is typically 4k, so the
value returned was far too low for good 9p I/O performance.

This patch adds stat_to_iounit() with a similar approach as the
existing get_iounit() function.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mT2Js-0000DW-OH@lizzy.crudebyte.com>

Merge remote-tracking branch 'remotes/dagrh/tags/pull-virtiofs-20211026' into staging

Virtiofsd pull 2021-10-26

New 'unsupported' feature for xattr mapping
  Good for hiding selinux

Plus some tidy ups and error handling.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Tue 26 Oct 2021 03:28:44 AM PDT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]

* remotes/dagrh/tags/pull-virtiofs-20211026:
  virtiofsd: Error on bad socket group name
  virtiofsd: Add a helper to stop all queues
  virtiofsd: Add a helper to send element on virtqueue
  virtiofsd: Remove unused virtio_fs_config definition
  virtiofsd: xattr mapping add a new type "unsupported"

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

virtiofsd: Error on bad socket group name

Make the '--socket-group=' option fail if the group name is unknown:

./tools/virtiofsd/virtiofsd .... --socket-group=zaphod
vhost socket: unable to find group 'zaphod'

Reported-by: Xiaoling Gao <xiagao@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20211014122554.34599-1-dgilbert@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>