ps2: Initial horizontal scroll support

This change adds support for horizontal scroll to ps/2 mouse device
code. The code is implemented to match the logic of linux kernel
which is used as a reference.

Signed-off-by: Dmitry Petrov <dpetroff@gmail.com>
Message-Id: <20220108153947.171861-2-dpetroff@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

edid: Added support for 4k@60 Hz monitor

Previously, the large modes (>1080p) that were generated by Qemu in its EDID
were all 50 Hz. If we provide them to a Guest OS and the user selects
one of these modes, then the OS by default only gets 50 FPS. This is
especially true for Windows OS. With this patch, we are now exposing a
3840x2160@60 Hz which will allow the guest OS to get 60 FPS.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Satyeshwar Singh <satyeshwar.singh@intel.com>
Message-Id: <20211116221103.27128-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

edid: set default resolution to 1280x800 (WXGA)

Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.

One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.

Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.

None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.

In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).

In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.

The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.

This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.

Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/mips/jazz: Inline vga_mmio_init() and remove it

vga_mmio_init() is used only one time and not very helpful,
inline and remove it.

Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-5-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/display/vga-mmio: QOM'ify vga_mmio_init() as TYPE_VGA_MMIO

Introduce TYPE_VGA_MMIO, a sysbus device.

While there is no change in the vga_mmio_init()
interface, this is a migration compatibility break
of the MIPS Acer Pica 61 Jazz machine (pica61).

Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/display/vga-mmio: Inline vga_mm_init()

Inline vga_mm_init() in vga_mmio_init() to simplify the
next patch review. Kind of.

Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/display: Rename VGA_ISA_MM -> VGA_MMIO

There is no ISA bus part in the MMIO VGA device, so rename:

 *  hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
 *  CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
 *  ISAVGAMMState -> VGAMmioState
 *  isa_vga_mm_init() -> vga_mmio_init()

Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

uas: add missing return

Otherwise we run the error handling code even for successful requests.

Fixes: 13b250b12ad3 ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>

ui: fix gtk clipboard clear assertion

When closing the QEMU Gtk display window, it can occasionaly warn:
qemu-system-x86_64: Gtk: gtk_clipboard_set_with_data: assertion 'targets != NULL' failed

#3  0x00007ffff4f02f22 in gtk_clipboard_set_with_data (clipboard=<optimized out>, targets=<optimized out>, n_targets=<optimized out>, get_func=<optimized out>, clear_func=<optimized out>, user_data=<optimized out>) at /usr/src/debug/gtk3-3.24.30-4.fc35.x86_64/gtk/gtkclipboard.c:672
#4  0x00007ffff552cd75 in gd_clipboard_update_info (gd=0x5555579a9e00, info=0x555557ba4b50) at ../ui/gtk-clipboard.c:98
#5  0x00007ffff552ce00 in gd_clipboard_notify (notifier=0x5555579aaba8, data=0x7fffffffd720) at ../ui/gtk-clipboard.c:128
#6  0x000055555603e0ff in notifier_list_notify (list=0x555556657470 <clipboard_notifiers>, data=0x7fffffffd720) at ../util/notify.c:39
#7  0x000055555594e8e0 in qemu_clipboard_update (info=0x555557ba4b50) at ../ui/clipboard.c:54
#8  0x000055555594e840 in qemu_clipboard_peer_release (peer=0x55555684a5b0, selection=QEMU_CLIPBOARD_SELECTION_PRIMARY) at ../ui/clipboard.c:40
#9  0x000055555594e786 in qemu_clipboard_peer_unregister (peer=0x55555684a5b0) at ../ui/clipboard.c:19
#10 0x000055555595f044 in vdagent_disconnect (vd=0x55555684a400) at ../ui/vdagent.c:852
#11 0x000055555595f262 in vdagent_chr_fini (obj=0x55555684a400) at ../ui/vdagent.c:908

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211216083233.1166504-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui/dbus: fix buffer-overflow detected by ASAN

On the last added dbus patch, I left a tiny BO:

==441487==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x611000025a70 at pc 0x7f0817bb764c bp 0x7ffde672ae60 sp 0x7ffde672ae58
WRITE of size 8 at 0x611000025a70 thread T0
    #0 0x7f0817bb764b in dbus_vc_class_init ../ui/dbus.c:401

A cookie for ASAN! not you C :)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: 7f767ca35e5 ("ui/dbus: register D-Bus VC handler")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211222144032.443424-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/audio/intel-hda: fix stream reset

Quote from:
High Definition Audio Specification 1.0a, section 3.3.35

Offset 80: {IOB}SDnCTL Stream Reset (SRST): Writing a 1 causes
the corresponding stream to be reset. The Stream Descriptor
registers (except the SRST bit itself) ... are reset.

Change the code to reset the Stream Descriptor Control and Status
registers except the SRST bit.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/757
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dsoundaudio: fix crackling audio recordings

Audio recordings with the DirectSound backend don't sound right.
A look a the Microsoft online documentation tells us why.

From the DirectSound Programming Guide, Capture Buffer Information:
'You can safely copy data from the buffer only up to the read
cursor.'

Change the code to read up to the read cursor instead of the
capture cursor.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

jackaudio: use ifdefs to hide unavailable functions

On Windows the jack_set_thread_creator() function and on MacOS the
pthread_setname_np() function with a thread pointer paramater is
not available. Use #ifdefs to remove the jack_set_thread_creator()
function call and the qjack_thread_creator() function in both
cases.

The qjack_thread_creator() function just sets the name of the
created thread for debugging purposes and isn't really necessary.

From the jack_set_thread_creator() documentation:
(...)

No normal application/client should consider calling this. (...)

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/785
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20211226154017.6067-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vnc.c: Fixed a deadlock bug.

The GDB statck is as follows:
(gdb) bt
0  __lll_lock_wait (futex=futex@entry=0x56211df20360, private=0) at lowlevellock.c:52
1  0x00007f263caf20a3 in __GI___pthread_mutex_lock (mutex=0x56211df20360) at ../nptl/pthread_mutex_lock.c:80
2  0x000056211a757364 in qemu_mutex_lock_impl (mutex=0x56211df20360, file=0x56211a804857 "../ui/vnc-jobs.h", line=60)
    at ../util/qemu-thread-posix.c:80
3  0x000056211a0ef8c7 in vnc_lock_output (vs=0x56211df14200) at ../ui/vnc-jobs.h:60
4  0x000056211a0efcb7 in vnc_clipboard_send (vs=0x56211df14200, count=1, dwords=0x7ffdf1701338) at ../ui/vnc-clipboard.c:138
5  0x000056211a0f0129 in vnc_clipboard_notify (notifier=0x56211df244c8, data=0x56211dd1bbf0) at ../ui/vnc-clipboard.c:209
6  0x000056211a75dde8 in notifier_list_notify (list=0x56211afa17d0 <clipboard_notifiers>, data=0x56211dd1bbf0) at ../util/notify.c:39
7  0x000056211a0bf0e6 in qemu_clipboard_update (info=0x56211dd1bbf0) at ../ui/clipboard.c:50
8  0x000056211a0bf05d in qemu_clipboard_peer_release (peer=0x56211df244c0, selection=QEMU_CLIPBOARD_SELECTION_CLIPBOARD)
    at ../ui/clipboard.c:41
9  0x000056211a0bef9b in qemu_clipboard_peer_unregister (peer=0x56211df244c0) at ../ui/clipboard.c:19
10 0x000056211a0d45f3 in vnc_disconnect_finish (vs=0x56211df14200) at ../ui/vnc.c:1358
11 0x000056211a0d4c9d in vnc_client_read (vs=0x56211df14200) at ../ui/vnc.c:1611
12 0x000056211a0d4df8 in vnc_client_io (ioc=0x56211ce70690, condition=G_IO_IN, opaque=0x56211df14200) at ../ui/vnc.c:1649
13 0x000056211a5b976c in qio_channel_fd_source_dispatch
    (source=0x56211ce50a00, callback=0x56211a0d4d71 <vnc_client_io>, user_data=0x56211df14200) at ../io/channel-watch.c:84
14 0x00007f263ccede8e in g_main_context_dispatch () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
15 0x000056211a77d4a1 in glib_pollfds_poll () at ../util/main-loop.c:232
16 0x000056211a77d51f in os_host_main_loop_wait (timeout=958545) at ../util/main-loop.c:255
17 0x000056211a77d630 in main_loop_wait (nonblocking=0) at ../util/main-loop.c:531
18 0x000056211a45bc8e in qemu_main_loop () at ../softmmu/runstate.c:726
19 0x000056211a0b45fa in main (argc=69, argv=0x7ffdf1701778, envp=0x7ffdf17019a8) at ../softmmu/main.c:50

From the call trace, we can see it is a deadlock bug.
vnc_disconnect_finish will acquire the output_mutex.
But, the output_mutex will be acquired again in vnc_clipboard_send.
Repeated locking will cause deadlock. So, I move
qemu_clipboard_peer_unregister() behind vnc_unlock_output();

Fixes: 0bf41cab93e ("ui/vnc: clipboard support")
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220105020808.597325-1-lei.rao@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb: allow max 8192 bytes for desc

A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)

This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/usb/dev-wacom: add missing HID descriptor

Linux need to fill up the HID descriptor in order to let the driver be
emulated. The descriptor was downloaded from [1]. The patch was tested
with evtest tool on top of qemu 5.2.0 with linux kernel 4.19.208.

[1] https://github.com/linuxwacom/wacom-hid-descriptors/tree/master/Wacom%20PenPartner

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Message-Id: <20220112090125.381364-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request' into staging

linux-user pull request 20220111
siginfo_t cleanup
more prtctl() update
target_struct.h cleanup

# gpg: Signature made Tue 11 Jan 2022 19:52:20 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request: (30 commits)
  linux-user: Implement capability prctls
  linux-user: Implement PR_SET_PDEATHSIG
  linux-user: Map signal number in PR_GET_PDEATHSIG
  linux-user: Do not special-case NULL for PR_GET_PDEATHSIG
  linux-user: Move target_struct.h generic definitions to generic/
  linux-user/arm: Move target_oabi_flock64 out of target_structs.h
  linux-user/xtensa: Use force_sig_fault
  linux-user/sparc: Use force_sig_fault
  linux-user/sh4: Use force_sig_fault
  linux-user/s390x: Use force_sig_fault
  linux-user/riscv: Use force_sig_fault
  linux-user/ppc: Use force_sig_fault
  linux-user/openrisc: Use force_sig_fault
  target/mips: Extract trap code into env->error_code
  target/mips: Extract break code into env->error_code
  linux-user/mips: Use force_sig_fault
  linux-user/mips: Improve do_break
  linux-user/microblaze: Fix SIGFPE si_codes
  linux-user/microblaze: Use force_sig_fault
  linux-user/m68k: Use force_sig_fault
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user: Fix clang warning for nios2-linux-user code

The clang in Ubuntu 18.04 (10.0.0-4ubuntu1) produces a warning
on the code added in commit f5ef0e518d03 where we use a
shifted expression in a boolean context:

../../linux-user/elfload.c:2423:16: error: converting the result of '<<' to a boolean always evaluates to true [-Werror,-Wtautological-constant-compare]
    } else if (LO_COMMPAGE) {
               ^
../../linux-user/elfload.c:1102:22: note: expanded from macro 'LO_COMMPAGE'
#define LO_COMMPAGE  TARGET_PAGE_SIZE
                     ^
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/cpu-all.h:231:31: note: expanded from macro 'TARGET_PAGE_SIZE'
#define TARGET_PAGE_SIZE   (1 << TARGET_PAGE_BITS)
                              ^
1 error generated.

The warning is bogus because whether LO_COMMPAGE is zero or not
depends on compile-time ifdefs; shut the compiler up by adding
an explicit comparison to zero.

Fixes: f5ef0e518d0331 ("linux-user/nios2: Map a real kuser page")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20220111082900.3341274-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user: Implement capability prctls

This is PR_CAPBSET_READ, PR_CAPBSET_DROP and the "legacy"
PR_CAP_AMBIENT PR_GET_SECUREBITS, PR_SET_SECUREBITS.

All of these arguments are integer values only, and do not
require mapping of values between host and guest.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Implement PR_SET_PDEATHSIG

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Map signal number in PR_GET_PDEATHSIG

Convert the host signal number to guest signal number
before returning the value to the guest.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220106225738.103012-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Do not special-case NULL for PR_GET_PDEATHSIG

The kernel does not special-case arg2 != NULL, so
neither should we.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Move target_struct.h generic definitions to generic/

Most targets share the same generic ipc structure definitions.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220107042600.149852-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/arm: Move target_oabi_flock64 out of target_structs.h

Place it next to copy_from/to_user_oabi_flock64, the only users,
inside the existing target-specific ifdef.  This leaves only
generic ipc structs in target_structs.h.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220107042600.149852-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/xtensa: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-25-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/sparc: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-24-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/sh4: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-23-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/s390x: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/riscv: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fix missing PC from EXCP_DEBUG by
merging the case with EXCP_BREAKPOINT.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-21-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/ppc: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fill in the missing PC for SIGTRAP.
The fault address for POWERPC_EXCP_ISI is nip exactly, not nip - 4.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/openrisc: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-19-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/mips: Extract trap code into env->error_code

Simplify cpu_loop by doing all of the decode in translate.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/mips: Extract break code into env->error_code

Simplify cpu_loop by doing all of the decode in translate.

This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16.  This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/mips: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and SIGFPE; use force_sig (SI_KERNEL) for EXCP_DSPDIS.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/mips: Improve do_break

Rename to do_tr_or_bp, as per the kernel function.
Add a 'trap' argument, akin to the kernel's si_code, but clearer.
The return value is always 0, so change the return value to void.
Use force_sig and force_sig_fault.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/microblaze: Fix SIGFPE si_codes

Fix a typo for ESR_EC_DIVZERO, which is integral not floating-point.
Fix the if ladder for decoding floating-point exceptions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/microblaze: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/m68k: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/i386: Use force_sig, force_sig_fault

Replace the local gen_signal with the generic functions that match
how the kernel raises signals. Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/i386: Split out maybe_handle_vm86_trap

Reduce the number of ifdefs within cpu_loop().

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/hppa: Set FPE_CONDTRAP for COND

This si_code was changed in 75abf64287cab, for linux 4.17.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Remove TARGET_NSIGFPE

This define is unused, and we have no similar define for
the other signal sub-codes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/hppa: Use the proper si_code for PRIV_OPR, PRIV_REG, OVERFLOW

These si_codes have been properly set by the kernel since the beginning.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/hppa: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fill in the missing PC for SIGTRAP
and missing si_code for SIGBUS.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/cris: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.  Fill in the missing PC for SIGTRAP.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/alpha: Use force_sig_fault

Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND

This si_code was changed in 4cc13e4f6d441, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap

These si_codes were changed in 535906c684fca, for linux 4.17.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' into staging

Python pull request

Fixes for the tests that broke during vacation, plus a simple syntax fix
for a python script.

# gpg: Signature made Mon 10 Jan 2022 23:24:47 GMT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jsnow-gitlab/tags/python-pull-request:
  simplebench: Fix Python syntax error (reported by LGTM)
  python: update type hints for mypy 0.930
  Python/aqmp: fix type definitions for mypy 0.920
  python/aqmp: use absolute import statement

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20220108' into staging

SD/MMC patches queue

- Add SDHC support for SD card SPI-mode (Frank Chang)

# gpg: Signature made Sat 08 Jan 2022 21:56:02 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/sdmmc-20220108:
  hw/sd: Add SDHC support for SD card SPI-mode
  hw/sd/sdcard: Rename Write Protect Group variables

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio: revert config interrupt changes

Lots of fallout from config interrupt changes. Author wants to rework
the patches. Let's revert quickly so others don't suffer meanwhile.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 10 Jan 2022 21:03:44 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  Revert "virtio: introduce macro IRTIO_CONFIG_IRQ_IDX"
  Revert "virtio-pci: decouple notifier from interrupt process"
  Revert "virtio-pci: decouple the single vector from the interrupt process"
  Revert "vhost: introduce new VhostOps vhost_set_config_call"
  Revert "vhost-vdpa: add support for config interrupt"
  Revert "virtio: add support for configure interrupt"
  Revert "vhost: add support for configure interrupt"
  Revert "virtio-net: add support for configure interrupt"
  Revert "virtio-mmio: add support for configure interrupt"
  Revert "virtio-pci: add support for configure interrupt"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

simplebench: Fix Python syntax error (reported by LGTM)

Fixes: b2fcb0c5754c2554b8406376e99a75e9e0a6b7bd
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20220107153019.504124-1-sw@weilnetz.de
Signed-off-by: John Snow <jsnow@redhat.com>

python: update type hints for mypy 0.930

Mypy 0.930, released Dec 22, changes the way argparse objects are
considered. Crafting a definition that works under Python 3.6 and an
older mypy alongside newer versions simultaneously is ... difficult,
so... eh. Stub it out with an 'Any' definition to get the CI moving
again.

Oh well.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Python/aqmp: fix type definitions for mypy 0.920

0.920 (Released 2021-12-15) is not entirely happy with the
way that I was defining _FutureT:

qemu/aqmp/protocol.py:601: error: Item "object" of the upper bound
"Optional[Future[Any]]" of type variable "_FutureT" has no attribute
"done"

Update it with something a little mechanically simpler that works better
across a wider array of mypy versions.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220110191349.1841027-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/aqmp: use absolute import statement

pylint's dependency astroid appears to have bugs in 2.9.1 and 2.9.2 (Dec
31 and Jan 3) that appear to erroneously expect the qemu namespace to
have an __init__.py file. astroid 2.9.3 (Jan 9) avoids that problem, but
appears to not understand a relative import within a namespace package.

Update the relative import - it was worth changing anyway, because these
packages will eventually be packaged and distributed separately.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Revert "virtio: introduce macro IRTIO_CONFIG_IRQ_IDX"

This reverts commit bf1d85c166c19af95dbd27b1faba1d2909732323.

Fixes: bf1d85c166 ("virtio: introduce macro IRTIO_CONFIG_IRQ_IDX")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio-pci: decouple notifier from interrupt process"

This reverts commit e3480ef81f6fb61cc9c04e3b5be8b7e84484fc05.

Fixes: e3480ef81f ("virtio-pci: decouple notifier from interrupt process")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio-pci: decouple the single vector from the interrupt process"

This reverts commit 316011b8a74e777eb3ba03171cd701a291c28867.

Fixes: 316011b8a7 ("virtio-pci: decouple the single vector from the interrupt process")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "vhost: introduce new VhostOps vhost_set_config_call"

This reverts commit 88062372340d33090b7f089ed3b1a00f530a8914.

Fixes: 8806237234 ("vhost: introduce new VhostOps vhost_set_config_call")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "vhost-vdpa: add support for config interrupt"

This reverts commit 634f7c89fbd78f57d00d5d6b39c0ade9df1fe27f.

Fixes: 634f7c89fb ("vhost-vdpa: add support for config interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio: add support for configure interrupt"

This reverts commit 081f864f56307551f59c5e934e3f30a7290d0faa.

Fixes: 081f864f56 ("virtio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "vhost: add support for configure interrupt"

This reverts commit f7220a7ce21604a4bc6260ccca4dc9068c1f27f2.

Fixes: f7220a7ce2 ("vhost: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio-net: add support for configure interrupt"

This reverts commit 497679d51087090d5a22fd265d1b96cf92d49d9d.

Fixes: 497679d510 ("virtio-net: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio-mmio: add support for configure interrupt"

This reverts commit d48185f1a40d4e4ed2fa2873a42b2a5eb8748256.

Fixes: d48185f1a4 ("virtio-mmio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio-pci: add support for configure interrupt"

This reverts commit d5d24d859c3957ea1674d0e102f96439cdbfe93a.

Fixes: d5d24d859c ("virtio-pci: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-7.0-pull-request' into staging

M68k pull request 20220109

Add virt compat machine type for 7.0
fix q800 -bios parameter
fix VRAM refresh
fix M68K_FEATURE_UNALIGNED_DATA feature

# gpg: Signature made Sun 09 Jan 2022 11:41:19 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-7.0-pull-request:
  target/m68k: don't word align SP in stack frame if M68K_FEATURE_UNALIGNED_DATA feature enabled
  macfb: fix VRAM dirty memory region logging
  q800: fix segfault with invalid MacROM
  hw: m68k: Add virt compat machine type for 7.0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/m68k: don't word align SP in stack frame if M68K_FEATURE_UNALIGNED_DATA feature enabled

Commit a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature") added
a new feature for processors from the 68020 onwards which do not require data
accesses to be word aligned.

Unfortunately the original commit missed an additional case whereby the SP is
still word aligned when setting up an additional format 1 stack frame so add the
necessary M68K_FEATURE_UNALIGNED_DATA feature guard.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108180453.18680-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

macfb: fix VRAM dirty memory region logging

The macfb VRAM memory region was configured with coalescing rather than dirty
memory logging enabled, causing some areas of the screen not to redraw after
a full screen update.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 8ac919a065 ("hw/m68k: add Nubus macfb video card")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108164147.30813-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

q800: fix segfault with invalid MacROM

"qemu-system-m68k -M q800 -bios /dev/null" crashes with a segfault
in q800_init().
This happens because the code doesn't check that rom_ptr() returned
a non-NULL pointer .

To avoid NULL pointer, don't allow 0 sized file and use bios_size with
rom_ptr().

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/756
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220107105049.961489-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw: m68k: Add virt compat machine type for 7.0

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20211218114340.1856757-1-laurent@vivier.eu>

Merge tag 'bsd-user-arm-pull-request' of gitlab.com:bsdimp/qemu into staging

bsd-user: arm (32-bit) support

This series of patches brings in 32-bit arm support for bsd-user.  It implements
all the bits needed to do image activation, signal handling, stack management
and threading. This allows us to get to the "Hello World" level. The arm and x86
code are now the same as in the bsd-user fork. For full context, the fork is at
https://github.com/qemu-bsd-user/qemu-bsd-user/tree/blitz (though the the recent
sig{bus,segv} needed updates are incomplete).

v5 changes:
   o Moved to using the CPUArchState typedef and move
     set_sigtramp_args, get_mcontext, set_mcontext, and
     get_ucontext_sigreturn prototypes to
     bsd-user/freebsd/target_os_ucontext.h
   o Fix issues with arm's set_mcontext related to masking
     and remove an unnecessary check.

We're down to only one hunk needing review:
    bsd-user/arm/target_arch_signal.c: arm set_mcontext

Warnings that should be ignored:
   o make checkpatch has a couple of complaints about the comments for the
     signal trampoline, since it's a false positive IMHO.
WARNING: Block comments use a leading /* on a separate line
+    /* 8 */ sys_sigreturn,
WARNING: Block comments use a leading /* on a separate line
+    /* 9 */ sys_exit

# gpg: Signature made Fri 07 Jan 2022 11:36:37 PM PST
# gpg:                using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg:                 aka "Warner Losh <imp@village.org>" [unknown]
# gpg:                 aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD  E1B7 6C1C D128 7DB0 1100

* tag 'bsd-user-arm-pull-request' of gitlab.com:bsdimp/qemu: (37 commits)
  bsd-user: add arm target build
  bsd-user/freebsd/target_os_ucontext.h: Require TARGET_*CONTEXT_SIZE
  bsd-user/arm/signal.c: arm get_ucontext_sigreturn
  bsd-user/arm/signal.c: arm set_mcontext
  bsd-user/arm/signal.c: arm get_mcontext
  bsd-user/arm/signal.c: arm set_sigtramp_args
  bsd-user/arm/target_arch_signal.h: Define size of *context_t
  bsd-user/arm/target_arch_signal.h: arm machine context and trapframe for signals
  bsd-user/arm/target_arch_signal.h: arm specific signal registers and stack
  bsd-user/arm/target_arch_elf.h: arm get_hwcap2 impl
  bsd-user/arm/target_arch_elf.h: arm get hwcap
  bsd-user/arm/target_arch_elf.h: arm defines for ELF
  bsd-user/arm/target_arch_thread.h: Routines to create and switch to a thread
  bsd-user/arm/target_arch_sigtramp.h: Signal Trampoline for arm
  bsd-user/arm/target_arch_vmparam.h: Parameters for arm address space
  bsd-user/arm/target_arch_reg.h: Implement core dump register copying
  bsd-user/arm/target_arch_cpu.h: Implement system call dispatch
  bsd-user/arm/target_arch_cpu.h: Implement data abort exceptions
  bsd-user/arm/target_arch_cpu.h: Implement trivial EXCP exceptions
  bsd-user/arm/target_arch_cpu.h: Dummy target_cpu_loop implementation
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-riscv-to-apply-20220108' of github.com:alistair23/qemu into staging

Second RISC-V PR for QEMU 7.0

 - Fix illegal instruction when PMP is disabled
 - SiFive PDMA 64-bit support
 - SiFive PLIC cleanups
 - Mark Hypervisor extension as non experimental
 - Enable Hypervisor extension by default
 - Support 32 cores on the virt machine
 - Corrections for the Vector extension
 - Experimental support for 128-bit CPUs
 - stval and mtval support for illegal instructions

# gpg: Signature made Fri 07 Jan 2022 09:50:11 PM PST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20220108' of github.com:alistair23/qemu: (37 commits)
  target/riscv: Implement the stval/mtval illegal instruction
  target/riscv: Fixup setting GVA
  target/riscv: Set the opcode in DisasContext
  target/riscv: actual functions to realize crs 128-bit insns
  target/riscv: modification of the trans_csrxx for 128-bit support
  target/riscv: helper functions to wrap calls to 128-bit csr insns
  target/riscv: adding high part of some csrs
  target/riscv: support for 128-bit M extension
  target/riscv: support for 128-bit arithmetic instructions
  target/riscv: support for 128-bit shift instructions
  target/riscv: support for 128-bit U-type instructions
  target/riscv: support for 128-bit bitwise instructions
  target/riscv: accessors to registers upper part and 128-bit load/store
  target/riscv: moving some insns close to similar insns
  target/riscv: setup everything for rv64 to support rv128 execution
  target/riscv: array for the 64 upper bits of 128-bit registers
  target/riscv: separation of bitwise logic and arithmetic helpers
  target/riscv: additional macros to check instruction support
  qemu/int128: addition of div/rem 128-bit operations
  exec/memop: Adding signed quad and octo defines
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: add arm target build

CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/freebsd/target_os_ucontext.h: Require TARGET_*CONTEXT_SIZE

Now that all architecutres define TARGET_[MU]CONTEXT_SIZE, enforce
requiring them and always check the sizeof target_{u,m}context_t
sizes.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/signal.c: arm get_ucontext_sigreturn

Update ucontext to implement sigreturn.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/signal.c: arm set_mcontext

Move the machine context to the CPU state.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/signal.c: arm get_mcontext

Get the machine context from the CPU state.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/signal.c: arm set_sigtramp_args

Implement set_sigtramp_args to setup the arguments to the sigtramp
calls.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_signal.h: Define size of *context_t

Define the native sizes of mcontext_t and ucontext_t so that the tests
in target_os_ucontext.h ensure the size of arm's version of these
structures is correct.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_signal.h: arm machine context and trapframe for signals

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_signal.h: arm specific signal registers and stack

Defines for registers and stack layout related to signals.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_elf.h: arm get_hwcap2 impl

Implement the extended HW capabilities for HWCAP2.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_elf.h: arm get hwcap

Implement get_elf_hwcap to get the first word of hardware capabilities.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_elf.h: arm defines for ELF

Basic set of defines needed for arm ELF file activation.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_thread.h: Routines to create and switch to a thread

Implement target_thread_init (to create a thread) and target_set_upcall
(to switch to a thread) for arm.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>

bsd-user/arm/target_arch_sigtramp.h: Signal Trampoline for arm

Copy of the signal trampoline code for arm, as well as setup_sigtramp to
write it to the stack.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_vmparam.h: Parameters for arm address space

Various parameters describing the layout of the ARM address space. In
addition, define routines to get the stack pointer and to set the second
return value.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_reg.h: Implement core dump register copying

Implement the register copying routines to extract registers from the
cpu for core dump generation.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Implement system call dispatch

Implement the system call dispatch. This implements all three kinds of
system call: direct and the two indirect variants. It handles all the
special cases for thumb as well.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Implement data abort exceptions

Implement EXCP_PREFETCH_ABORT AND EXCP_DATA_ABORT. Both of these data
exceptions cause a SIGSEGV.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Olivier Houchard <cognet@ci0.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Implement trivial EXCP exceptions

Implement EXCP_UDEF, EXCP_DEBUG, EXCP_INTERRUPT, EXCP_ATOMIC and
EXCP_YIELD. The first two generate a signal to the emulated
binary. EXCP_ATOMIC handles atomic operations. The remainder are fancy
nops.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Dummy target_cpu_loop implementation

Add a boiler plate CPU loop that does nothing except return an error for
all traps.

Signed-off-by: Sean Bruno <sbruno@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Implement target_cpu_clone_regs

Implement target_cpu_clone_regs to clone the resister state on a fork.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: CPU Loop definitions

target_arch_cpu.h is for CPU loop definitions. Create the file and
define target_cpu_init and target_cpu_reset for arm.

Signed-off-by: Olivier Houchard <cognet@ci0.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.c: Target specific TLS routines

Target specific TLS routines to get and set the TLS values.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_syscall.h: Add copyright and update name

The preferred name for the 32-bit arm is now armv7. Update the name to
reflect that. In addition, add Stacey's copyright to this file and
update the include guards to the new convention.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_sysarch.h: Use consistent include guards

As part of upstreaming, the include guards have been made more
consistent. Update this file to use the new guards.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/target_os_signal.h: Move signal prototypes to target_os_ucontext.h

Switch to the CPUArchState typedef and move target-provided prototypes
to target_os_ucontext.h.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/x86_64: Move functions into signal.c

Move the current inline functions into sigal.c. This will increate the
flexibility of implementation in the future.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/x86_64/target_arch_signal.h: Fill in mcontext_t

Fill in target_mcontext match the FreeBSD mcontext_t structure. Also
define the size correctly.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>