Merge branches 'clk-remove', 'clk-amlogic', 'clk-qcom', 'clk-parent' and 'clk-microchip' into clk-next

* clk-remove:
  clk: starfive: jh7110-vout: Convert to platform remove callback returning void
  clk: starfive: jh7110-isp: Convert to platform remove callback returning void
  clk: imx: imx8-acm: Convert to platform remove callback returning void

* clk-amlogic:
  clk: meson: Add missing clocks to axg_clk_regmaps

* clk-qcom: (62 commits)
  clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
  clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
  clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
  clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
  clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
  clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
  clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
  clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
  dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
  clk: qcom: drop the SC7180 Modem subsystem clock driver
  clk: qcom: Use qcom_branch_set_clk_en()
  clk: qcom: branch: Add a helper for setting the enable bit
  clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
  clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
  clk: qcom: gcc-msm8953: add more resets
  clk: qcom: videocc-*: switch to module_platform_driver
  ...

* clk-parent:
  clk: Fix clk_core_get NULL dereference

* clk-microchip:
  clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
  clk: microchip: mpfs: add missing MSSPLL outputs
  clk: microchip: mpfs: setup for using other mss pll outputs
  clk: microchip: mpfs: split MSSPLL in two
  dt-bindings: can: mpfs: add missing required clock
  dt-bindings: clock: mpfs: add more MSSPLL output definitions

Merge branches 'clk-aspeed', 'clk-keystone', 'clk-mobileye' and 'clk-allwinner' into clk-next

* clk-aspeed:
  clk: ast2600: Add FSI parent clock with correct rate
  dt-bindings: clock: ast2600: Add FSI clock

* clk-keystone:
  clk: keystone: sci-clk: Adding support for non contiguous clocks

* clk-mobileye:
  dt-bindings: reset: mobileye,eyeq5-reset: add bindings
  dt-bindings: clock: mobileye,eyeq5-clk: add bindings
  clk: fixed-factor: add fwname-based constructor functions
  clk: fixed-factor: add optional accuracy support

* clk-allwinner:
  clk: sunxi: usb: fix kernel-doc warnings
  clk: sunxi: sun9i-cpus: fix kernel-doc warnings
  clk: sunxi: a20-gmac: fix kernel-doc warnings

Merge branches 'clk-renesas', 'clk-cleanup', 'clk-hisilicon', 'clk-mediatek' and 'clk-bulk' into clk-next

 - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
   for a device
 - Fix some static checker errors in the hisilicon clk driver

* clk-renesas: (25 commits)
  clk: renesas: r8a779h0: Add RPC-IF clock
  clk: renesas: r8a779h0: Add SYS-DMAC clocks
  clk: renesas: r8a779h0: Add SDHI clock
  clk: renesas: r8a779h0: Add EtherAVB clocks
  clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
  clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
  clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
  clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
  clk: renesas: r8a779h0: Add I2C clocks
  clk: renesas: r8a779h0: Add watchdog clock
  clk: renesas: r8a779h0: Add PFC/GPIO clocks
  clk: renesas: r8a779g0: Fix PCIe clock name
  clk: renesas: cpg-mssr: Add support for R-Car V4M
  clk: renesas: rcar-gen4: Add support for FRQCRC1
  clk: renesas: r9a07g043: Add clock and reset entries for CRU
  clk: renesas: r9a08g045: Add clock and reset support for watchdog
  dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
  dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
  dt-bindings: power: Add r8a779h0 SYSC power domain definitions
  dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
  ...

* clk-cleanup:
  clk: zynq: Prevent null pointer dereference caused by kmalloc failure
  clk: fractional-divider: Use bit operations consistently
  clk: fractional-divider: Move mask calculations out of lock
  clk: ti: dpll3xxx: use correct function names in kernel-doc
  clk: clocking-wizard: Remove redundant initialization of pointer div_addr
  clk: keystone: sci-clk: match func name comment to actual
  clk: cdce925: Remove redundant assignment to variable 'rate'
  MAINTAINERS: drop Sekhar Nori

* clk-hisilicon:
  clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()
  clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
  clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()

* clk-mediatek:
  clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
  clk: mediatek: add infracfg reset controller for mt7988
  dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
  dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
  dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
  dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
  clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
  clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
  clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
  clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()

* clk-bulk:
  clk: Provide managed helper to get and enable bulk clocks

clk: zynq: Prevent null pointer dereference caused by kmalloc failure

The kmalloc() in zynq_clk_setup() will return null if the
physical memory has run out. As a result, if we use snprintf()
to write data to the null address, the null pointer dereference
bug will happen.

This patch uses a stack variable to replace the kmalloc().

Fixes: 0ee52b157b8e ("clk: zynq: Add clock controller driver")
Suggested-by: Michal Simek <michal.simek@amd.com>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20240301084437.16084-1-duoming@zju.edu.cn
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fractional-divider: Use bit operations consistently

Use BIT() where makes sense. This alings usage of bit operations
in the same pieces of code. Moreover, strictly speaking by the
letter of the C standard, left shift of 1 by 31 bits is UB (undefined
behaviour), switching to BIT() addresses that as well.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240303120732.240355-1-andy.shevchenko@gmail.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fractional-divider: Move mask calculations out of lock

There is no need to calculate masks under the lock taken.
Move them out of it.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240303121410.240761-1-andy.shevchenko@gmail.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'clk-microchip-6.9' of https://git./linux/kernel/git/at91/linux into clk-microchip

Pull Microchip clk driver updates from Claudiu Beznea:

Polarfire:
- MSSPLL hardware has 4 output clocks (the driver supported previously
  only one output); each of these 4 outputs feed dividers and the output
  of each divider feed individual hardware blocks (e.g. CAN, Crypto,
  eMMC); individual hardware block drivers need to control their clocks
  thus clock driver support was added for all MSSPLL output clocks.

* tag 'clk-microchip-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
  clk: microchip: mpfs: add missing MSSPLL outputs
  clk: microchip: mpfs: setup for using other mss pll outputs
  clk: microchip: mpfs: split MSSPLL in two
  dt-bindings: can: mpfs: add missing required clock
  dt-bindings: clock: mpfs: add more MSSPLL output definitions

clk: Fix clk_core_get NULL dereference

It is possible for clk_core_get to dereference a NULL in the following
sequence:

clk_core_get()
    of_clk_get_hw_from_clkspec()
        __of_clk_get_hw_from_provider()
            __clk_get_hw()

__clk_get_hw() can return NULL which is dereferenced by clk_core_get() at
hw->core.

Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based
clk_lookups") the check IS_ERR_OR_NULL() was performed which would have
caught the NULL.

Reading the description of this function it talks about returning NULL but
that cannot be so at the moment.

Update the function to check for hw before dereferencing it and return NULL
if hw is NULL.

Fixes: dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240302-linux-next-24-03-01-simple-clock-fixes-v1-1-25f348a5982b@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'qcom-clk-for-6.9' of https://git./linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

 - Support for Display, TCSR, GPU, and Camera clock controllers for
   Qualcomm's X1 Elite SoC
 - Typo fixes in the IPQ5018 GCC driver
 - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
 - Properly terminate frequency tables in different qcom clk drivers
 - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
 - Add missing UFS CLKREF clks on Qualcomm SC8180X
 - Avoid significant delays during boot by adding a softdep on rpmhpd to SDM845 gcc driver
 - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver
 - Fix the custom GPU GX "do-nothing" method in the GDSC driver
 - Add an external regulator to GX GDSC on SC8280XP GPU clk driver
 - Switch display, GPU, video, and camera clock drivers to module_platform_driver()
 - Set a longer delay for Venus resets on many Qualcomm SoCs
 - Correct the GDSC wait times in the Qualcomm SDM845 display clk driver
 - Remove the unused Qualcomm sc7180 modem clk driver

* tag 'qcom-clk-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits)
  clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
  clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
  clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
  clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
  clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
  clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
  clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
  clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
  dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
  clk: qcom: drop the SC7180 Modem subsystem clock driver
  clk: qcom: Use qcom_branch_set_clk_en()
  clk: qcom: branch: Add a helper for setting the enable bit
  clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
  clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
  clk: qcom: gcc-msm8953: add more resets
  clk: qcom: videocc-*: switch to module_platform_driver
  ...

Merge tag 'clk-meson-v6.9-1' of https://github.com/BayLibre/clk-meson into clk-amlogic

Pull Amlogic clk driver update from Jerome Brunet:

 - Fix clock listing Oops on Amlogic axg

* tag 'clk-meson-v6.9-1' of https://github.com/BayLibre/clk-meson:
  clk: meson: Add missing clocks to axg_clk_regmaps

clk: starfive: jh7110-vout: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/90054b8b2e118bc04ec37e044d0ac518bb177cf4.1709721042.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: starfive: jh7110-isp: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/312ec7052c4e327c0b365e167a8e86b406cb7dfa.1709721042.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx: imx8-acm: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/ba373ce7341518216a4940e76ce61d759b912b3d.1709721042.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset

The current register offset used for the GCC_UBI0_AXI_ARES reset
seems wrong. Or at least, the downstream driver uses [1] the same
offset which is used for other the GCC_UBI0_*_ARES resets.

Change the code to use the same offset used in the downstream
driver and also specify the reset bit explicitly to use the
same format as the followup entries.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L3773

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-3-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'

The following table shows the values of the 'halt_reg' and the
'enable_reg' fields from the pcie clocks defined in the current
driver:

  clock                        halt_reg    enable_reg

  gcc_pcie0_ahb_clk            0x75010     0x75010
  gcc_pcie0_aux_clk            0x75014     0x75014
  gcc_pcie0_axi_m_clk          0x75008     0x75008
  gcc_pcie0_axi_s_bridge_clk   0x75048     0x75048
  gcc_pcie0_axi_s_clk          0x7500c     0x7500c
  gcc_pcie0_pipe_clk           0x75018     0x75018

  gcc_pcie1_ahb_clk            0x76010     0x76010
  gcc_pcie1_aux_clk            0x76014     0x76014
  gcc_pcie1_axi_m_clk          0x76008     0x76008
  gcc_pcie1_axi_s_bridge_clk   0x76048     0x76048
  gcc_pcie1_axi_s_clk          0x7600c     0x7600c
  gcc_pcie1_pipe_clk                 8*    0x76018

Based on the table, it is quite likely that the pcie0 and the pci1
clocks are using the same register layout, however it seems that
the value of the 'halt_reg' field in the 'gcc_pcie1_pipe_clk' clock
is wrong.

In the downstream driver [1], the same '0x76018' value is used for
both the 'halt_reg' and for the 'enable_reg' fields of the
'gcc_pcie1_pipe_clk' clock.

Update the current driver to use the same value used downstream as
probably that is the correct value.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L2316

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'

The value of the 'enable_reg' field in the 'gcc_gmac0_sys_clk'
clock definition seems wrong as it is greater than the
'max_register' value defined in the regmap configuration.
Additionally, all other gmac specific branch clock definitions
within the driver uses the same value both for the 'enable_reg'
and for the 'halt_reg' fields.

Due to the lack of documentation the correct value is not known.
Looking into the downstream driver does not help either, as that
uses the same (presumably wrong) value [1].

Nevertheless, change the 'enable_reg' field of 'gcc_gmac0_sys_clk'
to use the value from the 'halt_reg' field so it follows the pattern
used in other gmac clock definitions. The change is based on the
assumption that the register layout of this clock is the same
as the other gmac clocks.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L1889

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-1-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc

The desired DT pattern for clock indexing is the following:

clocks = <&gcc GCC_CAMERA_AHB_CLK>,
         <&bi_tcxo_div2>,
         <&bi_tcxo_ao_div2>,
         <&sleep_clk>;

In order to facilitate that indexing structure we need to have DT_IFACE
enum defined.

Fixes: 76126a5129b5 ("clk: qcom: Add camcc clock driver for x1e80100")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240302-linux-next-24-03-01-simple-clock-fixes-v1-2-25f348a5982b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-7-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-6-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-5-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-4-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-3-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-2-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-1-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()

Add a label so that a bit of exception handling can be better reused
at the end of this function implementation.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/6a64e7b3-b1ce-46c4-9c85-89f731aee592@web.de
Reviewed-by: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ti: dpll3xxx: use correct function names in kernel-doc

Use function names that match the implementation in kernel-doc comments
to avoid kernel-doc warnings:

dpll3xxx.c:938: warning: expecting prototype for omap3_non_core_dpll_save_context(). Prototype was for omap3_noncore_dpll_save_context() instead
dpll3xxx.c:967: warning: expecting prototype for omap3_core_dpll_restore_context(). Prototype was for omap3_noncore_dpll_restore_context() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tero Kristo <kristo@kernel.org>
Cc: linux-omap@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20240115054739.4988-1-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: clocking-wizard: Remove redundant initialization of pointer div_addr

The pointer div_addr is being assigned a value that is never used, it is
being re-assigned a different value near the end of the function where
it is being read in the next statement. The initialization is redundant
and can be removed.

Cleans up clang scan build warning:
drivers/clk/xilinx/clk-xlnx-clock-wizard.c:501:16: warning: Value stored
to 'div_addr' during its initialization is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240223134347.3908301-1-colin.i.king@gmail.com
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'sunxi-clk-for-6.9-1' of https://git./linux/kernel/git/sunxi/linux into clk-allwinner

Pull Allwinner clk driver updates from Jernej Skrabec:

 - fix kerneldoc warnings

* tag 'sunxi-clk-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi: usb: fix kernel-doc warnings
  clk: sunxi: sun9i-cpus: fix kernel-doc warnings
  clk: sunxi: a20-gmac: fix kernel-doc warnings

Merge tag 'renesas-clk-for-v6.9-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull more Renesas clk driver updates from Geert Uytterhoeven:

 - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
   R-Car V4M
 - Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a779h0: Add RPC-IF clock
  clk: renesas: r8a779h0: Add SYS-DMAC clocks
  clk: renesas: r8a779h0: Add SDHI clock
  clk: renesas: r8a779h0: Add EtherAVB clocks
  clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
  clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
  clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
  clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks

dt-bindings: reset: mobileye,eyeq5-reset: add bindings

Add DT-Schema bindings for the EyeQ5 reset controller.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-4-31d4ce3630c3@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mobileye,eyeq5-clk: add bindings

Add DT schema bindings for the EyeQ5 clock controller driver.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-3-31d4ce3630c3@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fixed-factor: add fwname-based constructor functions

Add four functions to register clk_hw based on the fw_name field in
clk_parent_data, ie the value in the DT property `clock-names`.

There are variants for devm or not and passing an accuracy or not
passing one:

 - clk_hw_register_fixed_factor_fwname
 - clk_hw_register_fixed_factor_with_accuracy_fwname
 - devm_clk_hw_register_fixed_factor_fwname
 - devm_clk_hw_register_fixed_factor_with_accuracy_fwname

The `struct clk_parent_data` init is extracted from
__clk_hw_register_fixed_factor to each calling function. It is required
to allow each function to pass whatever field they want, not only index.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-2-31d4ce3630c3@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fixed-factor: add optional accuracy support

Fixed factor clock reports the parent clock accuracy. Add flags and acc
fields to `struct clk_fixed_factor` to support setting a fixed
accuracy. The default if no flag is set is not changed: use the parent
clock accuracy.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-1-31d4ce3630c3@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: keystone: sci-clk: Adding support for non contiguous clocks

Most of clocks and their parents are defined in contiguous range,
But in few cases, there is gap in clock numbers[0].
Driver assumes clocks to be in contiguous range, and add their clock
ids incrementally.

New firmware started returning error while calling get_freq and is_on
API for non-available clock ids.

In this fix, driver checks and adds only valid clock ids.

[0] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j7200/clocks.html
Section Clocks for NAVSS0_CPTS_0 Device, clock id 12-15 not present.

Fixes: 3c13933c6033 ("clk: keystone: sci-clk: add support for dynamically probing clocks")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240213082640.457316-1-u-kumar1@ti.com
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: keystone: sci-clk: match func name comment to actual

Correct the function name in the kernel-doc comment to match the
actual function name to avoid a kernel-doc warning:

drivers/clk/keystone/sci-clk.c:287: warning: expecting prototype for _sci_clk_get(). Prototype was for _sci_clk_build() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20240115001255.4124-1-rdunlap@infradead.org
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ast2600: Add FSI parent clock with correct rate

In order to calculate correct FSI bus clocks, the FSI clock must
correctly calculate the rate from the parent (APLL / 4).

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215220759.976998-3-eajames@linux.ibm.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: ast2600: Add FSI clock

Add a definition for the FSI clock.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215220759.976998-2-eajames@linux.ibm.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: cdce925: Remove redundant assignment to variable 'rate'

The variable 'rate' being assigned a value that is never read, the
assignment is redundant and can be removed.

Cleans up clang scan build warning:
drivers/clk/clk-cdce925.c:104:3: warning: Value stored to 'rate' is
never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240216140132.2108665-1-colin.i.king@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Provide managed helper to get and enable bulk clocks

Provide a managed devm_clk_bulk* wrapper to get and enable all
bulk clocks in order to simplify drivers that keeps all clocks
enabled for the time of driver operation.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Link: https://lore.kernel.org/r/20240220084046.23786-2-shradha.t@samsung.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: add infracfg reset controller for mt7988

Infracfg can also operate as reset controller, add support for it.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240201182409.39878-3-linux@fw-web.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs

Add reset constants for using as index in driver and dts.

Value is starting again from 0 because resets are used in another device
than existing constants.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240201182409.39878-2-linux@fw-web.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock

This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Dropped "syscon" as it was incorrectly used
3. Adjusted nodename, "compatible" and "reg" in example

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-4-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock

This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Dropped "syscon" as it was incorrectly used
3. Adjusted nodename, "compatible" and "reg" in example

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-3-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: convert hifsys to the json-schema clock

This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Documented "#reset-cells" property
3. Dropped "syscon" as it was incorrectly used
4. Adjusted "compatible" and "reg" in example

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-2-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical

Without the SGM_REG_SEL clock enabled the cpu freezes if trying to
access registers used by MT7981 clock drivers itself.
Mark SGM_REG_SEL as critical to make sure it is always enabled to
prevent freezes on boot even if the Ethernet driver which prepares
and enables the clock is not loaded or probed at a later point.

Fixes: 813c3b53b55b ("clk: mediatek: add MT7981 clock support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/fc157139e6b7f8dfb6430ac7191ba754027705e8.1708221995.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF

CLK_INFRA_SSPM_32K_SELF has the "f_f26m_ck" clock assigned as its parent.
This is inconsistent as the clock is part of a group that are all gates
without dividers, and this makes the kernel think it runs at 26 MHz.

After clarification from MediaTek engineers, the correct parent is
actually the system 32 KHz clock.

Fixes: 1eb8d61ac5c9 ("clk: mediatek: mt8183: Add back SSPM related clocks")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240219105125.956278-1-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()

'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling
mtk_free_clk_data() explicitly in the remove function would lead to a
double-free.

Remove the redundant call.

Fixes: c50e2ea6507b ("clk: mediatek: mt7622-apmixedsys: Add .remove() callback for module build")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2c553c2a5077757e4f7af0bb895acc43881cf62c.1704616152.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()

If an error occurs after mtk_alloc_clk_data(), mtk_free_clk_data() should
be called, as already done in the remove function.

Fixes: 54b7026f011e ("clk: mediatek: mt8135-apmixedsys: Convert to platform_driver and module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6cd6af61e5a91598068227f1f68cfcfde1507453.1704615011.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Link: https://lore.kernel.org/r/20240121142946.2796-1-erick.archer@gmx.com
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()

'p_clk' is an array allocated just before the for loop for all clk that
need to be registered.
It is incremented at each loop iteration.

If a clk_register() call fails, 'p_clk' may point to something different
from what should be freed.

The best we can do, is to avoid this wrong release of memory.

Fixes: 6c81966107dc ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/773fc8425c3b8f5b0ca7c1d89f15b65831a85ca9.1705850155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()

The gates are stored in 'hi3519_gate_clks', not 'hi3519_mux_clks'.
This is also in line with how hisi_clk_register_gate() is called in the
probe.

Fixes: 224b3b262c52 ("clk: hisilicon: hi3519: add driver remove path and fix some issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c3f1877c9a0886fa35c949c8f0ef25547f284f18.1704912510.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

MAINTAINERS: drop Sekhar Nori

My TI e-mail address will become inactive soon. Drop it.
Add an entry to CREDITS file for work done on TI DaVinci
family SoCs.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240131093434.55652-1-nsekhar@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: renesas: r8a779h0: Add RPC-IF clock

Add the module clock used by the SPI Multi I/O Bus Controller (RPC-IF)
on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/07a72378ca64b44341af960f042a6efd41d10dc3.1708354355.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add SYS-DMAC clocks

Add the module clocks used by the Direct Memory Access Controllers for
System (SYS-DMAC) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/0285ef5d0c0c9d232e196559c9130ab46733d7f7.1707915706.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add SDHI clock

Add the SDHI module clock, which is used by the SD Card/MMC Interface on
the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/3a604a6924043775c2ed0630b1c5c29be2d1a5b9.1707915642.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add EtherAVB clocks

Add the module clocks used by the Ethernet AVB (EtherAVB-IF) blocks on
the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a5b4252d9822ded3fd523bc35417306cae2ec2bd.1707661303.git.geert+renesas@glider.be

Merge tag 'renesas-clk-for-v6.9-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Ignore all clocks which are assigned to a non-Linux system
 - Add watchdog clock on RZ/G3S
 - Add camera (CRU) clock and reset on RZ/G2UL
 - Add support for the R-Car V4M (R8A779H0) SoC
 - Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a779h0: Add I2C clocks
  clk: renesas: r8a779h0: Add watchdog clock
  clk: renesas: r8a779h0: Add PFC/GPIO clocks
  clk: renesas: r8a779g0: Fix PCIe clock name
  clk: renesas: cpg-mssr: Add support for R-Car V4M
  clk: renesas: rcar-gen4: Add support for FRQCRC1
  clk: renesas: r9a07g043: Add clock and reset entries for CRU
  clk: renesas: r9a08g045: Add clock and reset support for watchdog
  dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
  dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
  dt-bindings: power: Add r8a779h0 SYSC power domain definitions
  dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
  clk: renesas: mstp: Remove obsolete clkdev registration
  clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system
  of: Add for_each_reserved_child_of_node()
  of: Add of_get_next_status_child() and makes more generic of_get_next
  of: Add __of_device_is_status() and makes more generic status check

clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

SDM845 downstream uses non-default values for GDSC internal waits.
Program them accordingly to avoid surprises.

Fixes: 81351776c9fb ("clk: qcom: Add display clock controller driver for SDM845")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 6
Link: https://lore.kernel.org/r/20240103-topic-845gdsc-v1-1-368efbe1a61d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller

This clock controller has never been used in the DT files merged to the
kernel. According to Sibi, it only worked on the pre-production devices.
For the production devices this functionality has been moved to the
firmware.

Drop the bindings now after dropping the driver itself.

Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-2-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: drop the SC7180 Modem subsystem clock driver

This driver has never been used in the DT files merged to the kernel.
According to Sibi, it only worked on the pre-production devices. For the
production devices this functionality has been moved to the firmware.

Drop the driver to remove possible confusion.

Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-1-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Use qcom_branch_set_clk_en()

Instead of magically poking at the bit0 of branch clocks' CBCR, use
the newly introduced helper.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-2-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: branch: Add a helper for setting the enable bit

We hardcode some clocks to be always-on, as they're essential to the
functioning of the SoC / some peripherals. Add a helper to do so
to make the writes less magic.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-1-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable

Fix typo for sel_shdi variable.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240131102930.1841901-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux

The status configuration for SD1 mux clock is SEL_SDHI1_STS. Fix it.

Fixes: 16b86e5c03c5 ("clk: renesas: rzg2l: Refactor SD mux driver")
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240131102930.1841901-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a779f0: Correct PFC/GPIO parent clock

According to the R-Car S4 Series Hardware User’s Manual Rev.0.81, the
parent clock of the Pin Function (PFC/GPIO) module clock is the CP
clock.

As this clock is not documented to exist on R-Car S4, use the CPEX clock
instead.

Fixes: 73421f2a48e6bd1d ("clk: renesas: r8a779f0: Add PFC clock")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f88ec4aede0eaf0107c8bb7b28ba719ac6cd418f.1706197415.git.geert+renesas@glider.be

clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks

According to the R-Car V4H Series Hardware User’s Manual Rev.1.00, the
parent clock of the Pin Function (PFC/GPIO) module clocks is the CP
clock.

Fix this by adding the missing CP clock, and correcting the PFC parents.

Fixes: f2afa78d5a0c0b0b ("dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions")
Fixes: 36ff366033f0dde1 ("clk: renesas: r8a779g0: Add PFC/GPIO clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5401fccd204dc90b44f0013e7f53b9eff8df8214.1706197297.git.geert+renesas@glider.be

clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const

The clk_init_data and pll_vco structures are never modified, make
them const.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240201-dispcc-sm8150-v1-1-cbeb89015e5d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks

Add missing QREF clocks for UFS MEM and UFS CARD controllers.

Fixes: 4433594bbe5d ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240131-ufs-phy-clock-v3-4-58a49d2f4605@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org' into clk-for-6.9

Merge the two SC8180X reset defines through a topic branch, to allow
them being picked up in the DeviceTree source tree as well.

clk: qcom: gcc-msm8953: add more resets

Add new entries in the gcc driver for some more resets found on MSM8953.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: expand commit message, move entry, add more entries]
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-2-fd7824559426@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz' into clk-for-6.9

Merge MSM8953 GCC DeviceTree binding update through topic branch, to
allow it to be merged into DeviceTree source tree as well.

clk: qcom: videocc-*: switch to module_platform_driver

There is no need to register video clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-4-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gpucc-*: switch to module_platform_driver

There is no need to register GPU clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-3-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: dispcc-*: switch to module_platform_driver

There is no need to register display clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-2-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: camcc-*: switch to module_platform_driver

There is no need to register camera clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-1-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8550: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value for SM8550 is known and extracted from the msm-5.15 driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-18-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8450: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8450, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/d0730ea5867264ee50b793f6700eb6a376ddcbbb

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-17-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8350: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8350, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-16-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8250: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.14/19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-15-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8150: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.14/19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-14-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8650: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The Venus hw on 8650 is similar to the one on 8550, follow its
requirements.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-13-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8550: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value for SM8550 is known and extracted from the msm-5.15 driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-12-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8450: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8450, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/d0730ea5867264ee50b793f6700eb6a376ddcbbb

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-11-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8350: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8350, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-10-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8250: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-9-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm7150: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.14/19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-8-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm4450: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 4450 being somewhat close to 8350 which is known
to require a higher delay [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-7-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8280xp: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 8280 being generally close to 8350 which is known
to require a higher delay [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-6-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8180x: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-5-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sa8775p: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 8775 being generally close to 8350 which is known
to require a higher delay [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-4-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: reset: Ensure write completion on reset de/assertion

Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.

Read back the value after regmap_update_bits to ensure write completion.

Fixes: b36ba30c8ac6 ("clk: qcom: Add reset controller support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-3-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Add missing UFS QREF clocks

Add missing QREF clocks for UFS MEM and UFS CARD controllers.

Fixes: 0fadcdfdcf57 ("dt-bindings: clock: Add SC8180x GCC binding")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: gcc-msm8953: add more resets

Add new defines for some more BCRs found on MSM8953.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: expand commit message, add more resets]
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: reset: Commonize the de/assert functions

They do the same thing, except the last argument of the last function
call differs. Commonize them.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-2-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: reset: Increase max reset delay

u8 limits us to 255 microseconds of delay. Promote the delay variable to
u16 to hold bigger values.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-1-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add camcc clock driver for x1e80100

Add the camcc clock driver for x1e80100

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-10-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add TCSR clock driver for x1e80100

The TCSR clock controller found on X1E80100 provides refclks
for PCIE, USB and UFS. Add clock driver for it.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-9-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add GPU clock driver for x1e80100

Add Graphics Clock Controller (GPUCC) support for X1E80100 platform.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-8-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add dispcc clock driver for x1e80100

Add the dispcc clock driver for x1e80100.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-7-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure

Zonda ole pll has as extra PLL_OFF_CONFIG_CTL_U2 register, hence add
support for it.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-6-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>