Merge branches 'clk-tegra', 'clk-imx', 'clk-sifive', 'clk-mediatek' and 'clk-summary' into clk-next

 - Support for SiFive FU740 PRCI
 - Add hardware enable information to clk_summary debugfs

* clk-tegra:
  clk: tegra: Fix duplicated SE clock entry
  clk: tegra: bpmp: Clamp clock rates on requests
  clk: tegra: Do not return 0 on failure

* clk-imx: (24 commits)
  clk: imx: scu: remove the calling of device_is_bound
  clk: imx: scu: Make pd_np with static keyword
  clk: imx8mq: drop of_match_ptr from of_device_id table
  clk: imx8mp: drop of_match_ptr from of_device_id table
  clk: imx8mn: drop of_match_ptr from of_device_id table
  clk: imx8mm: drop of_match_ptr from of_device_id table
  clk: imx: gate2: Remove unused variable ret
  clk: imx: gate2: Add locking in is_enabled op
  clk: imx: gate2: Add cgr_mask for more flexible number of control bits
  clk: imx: gate2: Check if clock is enabled against cgr_val
  clk: imx: gate2: Keep the register writing in on place
  clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case
  clk: imx: scu: fix build break when compiled as modules
  clk: imx: remove redundant assignment to pointer np
  clk: imx: remove unneeded semicolon
  clk: imx: lpcg: add suspend/resume support
  clk: imx: clk-imx8qxp-lpcg: add runtime pm support
  clk: imx: lpcg: allow lpcg clk to take device pointer
  clk: imx: imx8qxp-lpcg: add parsing clocks from device tree
  clk: imx: scu: add suspend/resume support
  ...

* clk-sifive:
  clk: sifive: Add clock enable and disable ops
  clk: sifive: Fix the wrong bit field shift
  clk: sifive: Add a driver for the SiFive FU740 PRCI IP block
  clk: sifive: Use common name for prci configuration
  clk: sifive: Extract prci core to common base
  dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI

* clk-mediatek:
  clk: mediatek: Make mtk_clk_register_mux() a static function

* clk-summary:
  clk: Add hardware-enable column to clk summary

Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and 'clk-unused' into clk-next

 - Replace clk-provider.h with of_clk.h when possible

* clk-amlogic:
  clk: meson: g12a: add MIPI DSI Host Pixel Clock
  dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings
  clk: meson: enable building as modules
  clk: meson: Kconfig: fix dependency for G12A
  clk: meson: axg: add MIPI DSI Host clock
  clk: meson: axg: add Video Clocks
  dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding
  dt-bindings: clk: axg-clkc: add Video Clocks

* clk-rockchip:
  clk: rockchip: fix i2s gate bits on rk3066 and rk3188
  clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks
  clk: rockchip: Remove redundant null check before clk_prepare_enable
  clk: rockchip: Add appropriate arch dependencies

* clk-of:
  xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h>

* clk-freescale:
  clk: fsl-flexspi: new driver
  dt-bindings: clock: document the fsl-flexspi-clk device
  clk: divider: add devm_clk_hw_register_divider_table()
  clk: qoriq: provide constants for the type
  clk: fsl-sai: use devm_clk_hw_register_composite_pdata()
  clk: composite: add devm_clk_hw_register_composite_pdata()
  clk: fsl-sai: fix memory leak
  clk: qoriq: Add platform dependencies

* clk-unused:
  clk: scpi: mark scpi_clk_match as maybe unused
  clk: pwm: drop of_match_ptr from of_device_id table

Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', 'clk-renesas' and 'clk-samsung' into clk-next

 - Camera clks on Qualcomm SC7180 SoCs
 - GCC and RPMh clks on Qualcomm SDX55 SoCs
 - RPMh clks on Qualcomm SM8350 SoCs
 - LPASS clks on Qualcomm SM8250 SoCs
 - Add devm variant of clk_notifier_register()
 - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw

* clk-doc:
  clk: fix a kernel-doc markup

* clk-qcom: (27 commits)
  clk: qcom: rpmh: add support for SM8350 rpmh clocks
  dt-bindings: clock: Add RPMHCC bindings for SM8350
  clk: qcom: lpasscc: Introduce pm autosuspend for SC7180
  clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2
  clk: qcom: gcc-sc7180: Use floor ops for sdcc clks
  clk: qcom: Add GDSC support for SDX55 GCC
  dt-bindings: clock: Add GDSC in SDX55 GCC
  clk: qcom: Add support for SDX55 RPMh clocks
  dt-bindings: clock: Introduce RPMHCC bindings for SDX55
  clk: qcom: Add SDX55 GCC support
  dt-bindings: clock: Add SDX55 GCC clock bindings
  clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic"
  clk: qcom: rpmh: Add CE clock on sdm845.
  dt-bindings: clock: Add entry for crypto engine RPMH clock resource
  clk: qcom: dispcc-sm8250: handle MMCX power domain
  clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones
  clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init()
  clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks
  clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks
  dt-bindings: clock: Add support for LPASS Always ON Controller
  ...

* clk-simplify:
  clk: remove unneeded dead-store initialization

* clk-hw:
  clk: meson: g12: use devm variant to register notifiers
  clk: add devm variant of clk_notifier_register
  clk: meson: g12: drop use of __clk_lookup()
  clk: add api to get clk consumer from clk_hw
  clk: avoid devm_clk_release name clash

* clk-renesas:
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema
  clk: renesas: sh73a0: Stop using __raw_*() I/O accessors
  clk: renesas: r8a774c0: Add RPC clocks
  clk: renesas: r8a779a0: Fix R and OSC clocks
  clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv
  clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()
  clk: renesas: r8a774b1: Add RPC clocks
  clk: renesas: r8a774a1: Add RPC clocks
  clk: renesas: r8a779a0: Add VIN clocks
  clk: renesas: r8a779a0: Add CSI4[0-3] clocks
  MAINTAINERS: Update git repo for Renesas clock drivers
  clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static
  clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI

* clk-samsung:
  clk: samsung: Prevent potential endless loop in the PLL ops
  clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210

clk: Add hardware-enable column to clk summary

Add "hardware enable" column to the clk summary in order to show actual
hardware enable-state of all clocks. The possible states are "Y/N/?",
where question mark means that state is unknown, i.e. clock isn't a
mux and clk-driver doesn't support is_enabled() callback for this clock.

In conjunction with clk_ignore_unused, this tells us what unused clocks
are left enabled after bootloader. This is also a useful aid for
debugging interactions with firmware which changes clock states without
notifying kernel.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201115203432.13934-1-digetx@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Make mtk_clk_register_mux() a static function

mtk_clk_register_mux() should be a static function

Fixes: a3ae549917f16 ("clk: mediatek: Add new clkmux register API")
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Link: https://lore.kernel.org/r/1605256192-31307-1-git-send-email-weiyi.lu@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sifive: Add clock enable and disable ops

Add new functions "sifive_prci_clock_enable(), sifive_prci_clock_disable()
and sifive_clk_is_enabled()" to enable or disable the PRCI clock

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Tested-by: Zong Li <zong.li@sifive.com>
Link: https://lore.kernel.org/r/20201209094916.17383-6-zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sifive: Fix the wrong bit field shift

The clk enable bit should be 31 instead of 24.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reported-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Link: https://lore.kernel.org/r/20201209094916.17383-5-zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sifive: Add a driver for the SiFive FU740 PRCI IP block

Add driver code for the SiFive FU740 PRCI IP block. This IP block
handles reset and clock control for the SiFive FU740 device and
implements SoC-level clock tree controls and dividers.

The link of unmatched as follow, and the U740-C000 manual would
be present in the same page as soon.
https://www.sifive.com/boards/hifive-unmatched

This driver contains bug fixes and contributions from
Henry Styles <hes@sifive.com>
Erik Danie <erik.danie@sifive.com>
Pragnesh Patel <pragnesh.patel@sifive.com>

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Henry Styles <hes@sifive.com>
Cc: Erik Danie <erik.danie@sifive.com>
Cc: Pragnesh Patel <pragnesh.patel@sifive.com>
Link: https://lore.kernel.org/r/20201209094916.17383-4-zong.li@sifive.com
[sboyd@kernel.org: Include header to silence sparse]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sifive: Use common name for prci configuration

Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
patch is prepared for fu740 support.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
Link: https://lore.kernel.org/r/20201209094916.17383-3-zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: sifive: Extract prci core to common base

Extract common core of prci driver to an independent file, it could
allow other chips to reuse it. Separate SoCs-dependent code 'fu540'
from prci core, then we can easily add 'fu740' later.

Almost these changes are code movement. The different is adding the
private data for each SoC use, so it needs to get match data in probe
callback function, then use the data for initialization.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20201209094916.17383-2-zong.li@sifive.com
[sboyd@kernel.org: Include header to silence sparse]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI

Add YAML DT binding documentation for the SiFive FU740 PRCI. The
link of unmatched board as follow, the U740-C000 manual would be present
in the same page later.

    https://www.sifive.com/boards/hifive-unmatched

Passes dt_binding_check.

Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://lore.kernel.org/r/20201126030043.67390-1-zong.li@sifive.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'renesas-clk-for-v5.11-tag3' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Update git repo branch for Renesas clock drivers
 - Add camera (CSI) and video-in (VIN) clocks on R-Car V3U
 - Add RPC (QSPI/HyperFLASH) clocks on RZ/G2M, RZ/G2N, and RZ/G2E
 - Stop using __raw_*() I/O accessors
 - One more conversion of DT bindings to json-schema
 - Minor fixes and improvements

* tag 'renesas-clk-for-v5.11-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema
  clk: renesas: sh73a0: Stop using __raw_*() I/O accessors
  clk: renesas: r8a774c0: Add RPC clocks
  clk: renesas: r8a779a0: Fix R and OSC clocks
  clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv
  clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()
  clk: renesas: r8a774b1: Add RPC clocks
  clk: renesas: r8a774a1: Add RPC clocks
  clk: renesas: r8a779a0: Add VIN clocks
  clk: renesas: r8a779a0: Add CSI4[0-3] clocks
  MAINTAINERS: Update git repo for Renesas clock drivers
  clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static
  clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI

Merge tag 'clk-imx-5.11' of git://git./linux/kernel/git/shawnguo/linux into clk-imx

Pull i.MX clk driver updates from Shawn Guo:

 - A series from Abel Vesa to improve clk-gate2 driver and make it more
   flexible.
 - A patch set from Dong Aisheng to add a new two cells binding for SCU
   clocks, so that IMX SCU based platforms like MX8QM and MX8QXP can be
   supported with SS (Subsystems).
 - Drop of_match_ptr from of_device_id table for i.MX8 clock drivers, as
   they can only be probed from device tree.
 - Other small cosmetic changes.

* tag 'clk-imx-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
  clk: imx: scu: remove the calling of device_is_bound
  clk: imx: scu: Make pd_np with static keyword
  clk: imx8mq: drop of_match_ptr from of_device_id table
  clk: imx8mp: drop of_match_ptr from of_device_id table
  clk: imx8mn: drop of_match_ptr from of_device_id table
  clk: imx8mm: drop of_match_ptr from of_device_id table
  clk: imx: gate2: Remove unused variable ret
  clk: imx: gate2: Add locking in is_enabled op
  clk: imx: gate2: Add cgr_mask for more flexible number of control bits
  clk: imx: gate2: Check if clock is enabled against cgr_val
  clk: imx: gate2: Keep the register writing in on place
  clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case
  clk: imx: scu: fix build break when compiled as modules
  clk: imx: remove redundant assignment to pointer np
  clk: imx: remove unneeded semicolon
  clk: imx: lpcg: add suspend/resume support
  clk: imx: clk-imx8qxp-lpcg: add runtime pm support
  clk: imx: lpcg: allow lpcg clk to take device pointer
  clk: imx: imx8qxp-lpcg: add parsing clocks from device tree
  clk: imx: scu: add suspend/resume support
  ...

clk: tegra: Fix duplicated SE clock entry

The periph_clks[] array contains duplicated entry for Security Engine
clock which was meant to be defined for T210, but it wasn't added
properly. This patch corrects the T210 SE entry and fixes the following
error message on T114/T124: "Tegra clk 127: register failed with -17".

Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210")
Tested-by Nicolas Chauvet <kwizart@gmail.com>
Reported-by Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: rpmh: add support for SM8350 rpmh clocks

This adds the RPMH clocks present in SM8350 SoC

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201208064702.3654324-3-vkoul@kernel.org
[sboyd@kernel.org: Move sdx55 to the right place]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add RPMHCC bindings for SM8350

Add bindings and update documentation for clock rpmh driver on SM8350.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201208064702.3654324-2-vkoul@kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: lpasscc: Introduce pm autosuspend for SC7180

The LPASSCC driver's suspend/resume is invoked multiple number of times
and thus allow the device to autosuspend for 500ms.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1605890417-721-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2

50 MHz is an incredibly common clock rate for SD cards to run at.
It's "high speed" mode in SD (not very fast these days, but it used to
be) or:
  #define HIGH_SPEED_MAX_DTR 50000000

If we don't support this then older "high speed" cards can only run at
25 MHz or at half their normal speed.  There doesn't seem to be any
reason to skip this clock rate, so add it.

Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201210102234.2.I26dcc0cee374f5571d9929c9985f463773167e68@changeid
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-sc7180: Use floor ops for sdcc clks

I would repeat the same commit message that was in commit 5e4b7e82d497
("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems
silly to do so when you could just go read that commit.

NOTE: this is actually extra terrible because we're missing the 50 MHz
rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add
50 MHz clock rate for SDC2")).  That means then when you run an older
SD card it'll try to clock it at 100 MHz when it's only specced to run
at 50 MHz max.  As you can probably guess that doesn't work super
well.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: scpi: mark scpi_clk_match as maybe unused

The scpi_clk_match (struct of_device_id) is referenced only with
CONFIG_OF builds thus mark it as __maybe_unused:

    drivers/clk/clk-scpi.c:132:34: warning:
        ‘scpi_clk_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201103162435.13689-8-krzk@kernel.org
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: pwm: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF && !CONFIG_MODULES):

    drivers/clk/clk-pwm.c:139:34: warning:
        ‘clk_pwm_dt_ids’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201103162435.13689-1-krzk@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema

Convert Renesas R-Car USB 2.0 clock selector bindings documentation
to json-schema.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1604543524-31482-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

clk: renesas: sh73a0: Stop using __raw_*() I/O accessors

There is no reason to keep on using the __raw_{read,write}l() I/O
accessors in Renesas ARM driver code.  Switch to using the plain
{read,write}l() I/O accessors, to have a chance that this works on
big-endian.

Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201119125053.4065746-1-geert+renesas@glider.be

clk: renesas: r8a774c0: Add RPC clocks

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR
driver.

Add new clk type CLK_TYPE_GEN3_E3_RPCSRC to register rpcsrc as a fixed
clock on R-Car Gen3 E3 (and also RZ/G2E which is identical to E3 SoC),
parent and the divider is set based on the register value CPG_RPCCKCR[4:3]
which has been set prior to booting the kernel.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201116101002.5986-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a779a0: Fix R and OSC clocks

The R-Car V3U clock driver defines the R and OSC clocks using R-Car Gen3
clock types.  However, The R-Car V3U clock driver does not use the R-Car
Gen3 clock driver core, hence registering the R and OSC clocks fails:

    renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock osc: -22
    renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock r: -22

Fix this by introducing clock definition macros specific to R-Car V3U.
Note that rcar_r8a779a0_cpg_clk_register() already handled the related
clock types.  Drop the now unneeded include of rcar-gen3-cpg.h.

Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201109152614.2465483-1-geert+renesas@glider.be

clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv

The struct cpg_mssr_priv missed proper formatting:

    drivers/clk/renesas/renesas-cpg-mssr.c:142: warning:
        cannot understand function prototype: 'struct cpg_mssr_priv '

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201103162435.13689-7-krzk@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()

devm_reset_control_array_get_shared() looks more readable

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/1604375093-6451-1-git-send-email-yejune.deng@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a774b1: Add RPC clocks

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
as well as the RPC-IF module clock, in the RZ/G2N (R8A774B1) CPG/MSSR
driver.

Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20201016121709.8447-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a774a1: Add RPC clocks

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
as well as the RPC-IF module clock, in the RZ/G2M (R8A774A1) CPG/MSSR
driver.

Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20201016121709.8447-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a779a0: Add VIN clocks

Add definitions of the VIN instance clocks for R-Car V3U.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20201016111158.17521-5-jacopo+renesas@jmondi.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a779a0: Add CSI4[0-3] clocks

Add definitions of the CSI-2 receiver clocks for R-Car V3U.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20201016111158.17521-2-jacopo+renesas@jmondi.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

MAINTAINERS: Update git repo for Renesas clock drivers

Align the clock branch name with other renesas-* branches pulled by
subsystem maintainers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200925110713.2652-1-geert+renesas@glider.be

clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static

When compiling with clang:

    drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:21: warning: no previous prototype for function 'rcar_r8a779a0_cpg_clk_register' [-Wmissing-prototypes]
    struct clk * __init rcar_r8a779a0_cpg_clk_register(struct device *dev,
   ^
    drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
    struct clk * __init rcar_r8a779a0_cpg_clk_register(struct device *dev,
    ^
    static

Similarly, with sparse:

    drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:12: warning: symbol 'rcar_r8a779a0_cpg_clk_register' was not declared. Should it be static?

There are no users of rcar_r8a779a0_cpg_clk_register() outside this
file, so it should be static.

Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200924111808.15358-1-geert+renesas@glider.be

clk: qcom: Add GDSC support for SDX55 GCC

Add GDSC support to control the power supply of power domains in SDX55
GCC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20201126072844.35370-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add GDSC in SDX55 GCC

Add GDSC instances in SDX55 GCC block.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20201126072844.35370-6-manivannan.sadhasivam@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add support for SDX55 RPMh clocks

Add support for following clocks maintained by RPMh in SDX55 SoCs.

* BI TCXO
* RF_CLK1
* RF_CLK1_AO
* RF_CLK2
* RF_CLK2_AO
* QPIC (Qualcomm Technologies, Inc. Parallel Interface Controller)

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201126072844.35370-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Introduce RPMHCC bindings for SDX55

Add compatible for SDX55 RPMHCC and DT include.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201126072844.35370-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add SDX55 GCC support

Add Global Clock Controller (GCC) support for SDX55 SoCs from Qualcomm.

Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
[mani: converted to parent_data, commented critical clocks, cleanups]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201126072844.35370-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add SDX55 GCC clock bindings

Add device tree bindings for global clock controller on SDX55 SoCs.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201126072844.35370-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fsl-flexspi: new driver

Add support for the FlexSPI clock on Freescale Layerscape SoCs. The
clock is a simple divider based one and is located inside the device
configuration space (DCFG).

This will allow switching the SCK frequencies for the FlexSPI interface
on the LS1028A and the LX2160A.

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201108185113.31377-8-michael@walle.cc
[sboyd@kernel.org: Drop modalias, add module table]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: document the fsl-flexspi-clk device

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201108185113.31377-7-michael@walle.cc
[sboyd@kernel.org: DT bindings aren't drivers]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: divider: add devm_clk_hw_register_divider_table()

This will simplify drivers which would only unregister the clk in their
remove() op.

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201108185113.31377-6-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qoriq: provide constants for the type

To avoid future mistakes in the device tree for the clockgen module, add
constants for the clockgen subtype as well as a macro for the PLL
divider.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201108185113.31377-4-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fsl-sai: use devm_clk_hw_register_composite_pdata()

Simplify the driver by using that helper and drop the remove() function.

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201105192746.19564-4-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: composite: add devm_clk_hw_register_composite_pdata()

This will simplify drivers which would only unregister the clk in their
remove() op.

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201105192746.19564-3-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fsl-sai: fix memory leak

If the device is removed we don't unregister the composite clock. Fix
that.

Fixes: 9cd10205227c ("clk: fsl-sai: new driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201105192746.19564-2-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qoriq: Add platform dependencies

The Freescale QorIQ clock controller is only present on Freescale E500MC
and Layerscape SoCs.  Add platform dependencies to the CLK_QORIQ config
symbol, to avoid asking the user about it when configuring a kernel
without E500MC or Layerscape support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20201110154750.3285411-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h>

The Xtensa time code is not a clock provider, and just needs to call
of_clk_init().

Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20201110155117.3286247-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h>

The SuperH/J2 DT platform code is not a clock provider, and just needs
to call of_clk_init().

Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201110155029.3286090-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'v5.11-rockchip-clk-1' of git://git./linux/kernel/git/mmind/linux-rockchip into clk-rockchip

Pull Rockchip clk driver updates from Heiko Stuebner:

Added arch-dependencies for the newly added per-soc config symbols,
an unneeded redundancy removed and making i2s actually work on the
rk3066.

* tag 'v5.11-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: fix i2s gate bits on rk3066 and rk3188
  clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks
  clk: rockchip: Remove redundant null check before clk_prepare_enable
  clk: rockchip: Add appropriate arch dependencies

Merge tag 'clk-meson-v5.11-1' of https://github.com/BayLibre/clk-meson into clk-amlogic

Pull Amlogic clk driver updates from Jerome Brunet:

 - Add MIPI DSI clocks for axg and g12
 - Make it possible to build controllers as modules
 - Fix Video PLL clock dependency

* tag 'clk-meson-v5.11-1' of https://github.com/BayLibre/clk-meson:
  clk: meson: g12a: add MIPI DSI Host Pixel Clock
  dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings
  clk: meson: enable building as modules
  clk: meson: Kconfig: fix dependency for G12A
  clk: meson: axg: add MIPI DSI Host clock
  clk: meson: axg: add Video Clocks
  dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding
  dt-bindings: clk: axg-clkc: add Video Clocks
  clk: meson: g12: use devm variant to register notifiers
  clk: add devm variant of clk_notifier_register
  clk: meson: g12: drop use of __clk_lookup()
  clk: add api to get clk consumer from clk_hw
  clk: avoid devm_clk_release name clash

Merge tag 'clk-v5.11-samsung' of https://git./linux/kernel/git/snawrocki/clk into clk-samsung

Pull Samsung clk driver updates from Sylwester Nawrocki:

 - Correction of Kconfig dependencies for better compile test coverage
 - Refactoring of the PLL clocks driver

* tag 'clk-v5.11-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
  clk: samsung: Prevent potential endless loop in the PLL ops
  clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210

clk: imx: scu: remove the calling of device_is_bound

The device_is_bound() is invisible to drivers when built as modules.
It's also not aimed to be used by drivers according to Greg K.H.
Let's remove it from clk-scu driver and find another way to do proper
driver loading sequence.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Fixes: 77d8f3068c63 ("clk: imx: scu: add two cells binding support")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: rockchip: fix i2s gate bits on rk3066 and rk3188

The Rockchip PX2/RK3066 uses these bits in CRU_CLKGATE7_CON:

hclk_i2s_8ch_gate_en  bit 4 (dtsi: i2s0)
hclk_i2s0_2ch_gate_en bit 2 (dtsi: i2s1)
hclk_i2s1_2ch_gate_en bit 3 (dtsi: i2s2)

The Rockchip PX3/RK3188 uses this bit in CRU_CLKGATE7_CON:

hclk_i2s_2ch_gate_en  bit 2 (dtsi: i2s0)

The bits got somehow mixed up in the clk-rk3188.c file.
The labels in the dtsi files are not suppose to change.
The sclk and hclk names should match for
"trace_event=clk_disable,clk_enable",
so remove GATE HCLK_I2S0 from the common clock tree and
fix the bits in the rk3066 and rk3188 clock tree.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201118135822.9582-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks

Add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks,
so that the parent COMPOSITE_FRACMUX and COMPOSITE_NOMUX
also update.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201118135822.9582-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: rockchip: Remove redundant null check before clk_prepare_enable

Because clk_prepare_enable() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201127090551.50254-1-vulab@iscas.ac.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic"

There is a spelling mistake in the Kconfig help text. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201126232400.15011-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'for-5.11-clk' of git://git./linux/kernel/git/tegra/linux into clk-tegra

Pull a couple Tegra clk driver updates from Thierry Reding:

This set consists of two fixes for minor issues that rarely, if ever,
happen, so not urgent enough for these to go into v5.10.

* tag 'for-5.11-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: bpmp: Clamp clock rates on requests
  clk: tegra: Do not return 0 on failure

clk: tegra: bpmp: Clamp clock rates on requests

BPMP firmware ABI expects the rate inputs in int64_t. However,
tegra_bpmp_clk_round_rate() and tegra_bpmp_clk_set_rate() functions
directly assign 'unsigned long' inputs to a int64_t value causing
unexpected rounding errors.

Fix this by clipping the input rate to S64_MAX.

Signed-off-by: Sivaram Nair <sivaramn@nvidia.com>
[mperttunen: slight cleanup]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Sivaram Nair <sivaramn@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

clk: meson: g12a: add MIPI DSI Host Pixel Clock

This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different
from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201126141600.2084586-3-narmstrong@baylibre.com

Merge branch 'v5.11/headers' into v5.11/drivers

dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings

This adds the MIPI DSI Host Pixel Clock bindings.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201126141600.2084586-2-narmstrong@baylibre.com

clk: qcom: rpmh: Add CE clock on sdm845.

Qualcomm CE clock resource that is managed by BCM is required
by crypto driver to access the core clock.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20201119155233.3974286-3-thara.gopinath@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add entry for crypto engine RPMH clock resource

Add clock id forc CE clock resource which is required to bring up the
crypto engine on sdm845.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20201119155233.3974286-2-thara.gopinath@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: samsung: Prevent potential endless loop in the PLL ops

The PLL status polling loops in the set_rate callbacks of some PLLs
have no timeout detection and may become endless loops when something
goes wrong with the PLL.

For some PLLs there is already the ktime API based timeout detection,
but it will not work in all conditions when .set_rate gets called.
In particular, before the clocksource is initialized or when the
timekeeping is suspended.

This patch adds a common helper with the PLL status bit polling and
timeout detection. For conditions where the timekeeping API should not
be used a simple readl_relaxed/cpu_relax() busy loop is added with the
iterations limit derived from measurements of readl_relaxed() execution
time for various PLL types and Exynos SoCs variants.

Actual PLL lock time depends on the P divider value, the VCO frequency
and a constant PLL type specific LOCK_FACTOR and can be calculated as

 lock_time = Pdiv * LOCK_FACTOR / VCO_freq

For the ktime API use cases a common timeout value of 20 ms is applied
for all the PLLs with an assumption that maximum possible value of Pdiv
is 64, maximum possible LOCK_FACTOR value is 3000 and minimum VCO
frequency is 24 MHz.

Link: https://lore.kernel.org/r/20201120155731.26898-1-s.nawrocki@samsung.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210

So far all Exynos, S3C64xx and S5Pv210 clock units were selected by
respective SOC/ARCH Kconfig option.  On a kernel built for selected
SoCs, this allowed to build only limited set of matching clock drivers.
However compile testing was not possible in such case as Makefile object
depends on SOC/ARCH option.

Add separate Kconfig options for each of them to be able to compile
test.

Link: https://lore.kernel.org/r/20201119164509.754851-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

clk: meson: enable building as modules

Make it possible to build all clk drivers as modules, but default
remains built-in.

No functional changes.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201118191405.36798-1-khilman@baylibre.com

clk: meson: Kconfig: fix dependency for G12A

When building only G12A, ensure that VID_PLL_DIV clock driver is
selected, otherwise results in this build error:

ERROR: modpost: "meson_vid_pll_div_ro_ops" [drivers/clk/meson/g12a.ko] undefined!

Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201118190930.34352-1-khilman@baylibre.com

clk: meson: axg: add MIPI DSI Host clock

This adds the MIPI DSI Host clock, used to measure the signal timings
(ENC VSYNC or DW-MIPI-DSI eDPI timings).

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200915124553.8056-5-narmstrong@baylibre.com

clk: meson: axg: add Video Clocks

Add the clocks entries used in the video clock path, the clock path is
doubled to permit having different synchronized clocks for different parts
of the video pipeline.

The AXG only has a single ENCL CTS clock and even if VCLK exist along
VCLK2, only VCLK2 is used since it clocks the MIPI DSI IP directly.

All dividers are flagged with CLK_GET_RATE_NOCACHE, and all gates are
flagged with CLK_IGNORE_UNUSED since they are currently directly handled by
the Meson DRM Driver.  Once the DRM Driver is fully migrated to using the
Common Clock Framework to handle the video clock tree, the
CLK_GET_RATE_NOCACHE and CLK_IGNORE_UNUSED will be dropped.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200915124553.8056-4-narmstrong@baylibre.com

Merge branch 'v5.11/headers' into integ

dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding

Add the clock ID for the MIPI DSI Host clock.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200915124553.8056-3-narmstrong@baylibre.com

dt-bindings: clk: axg-clkc: add Video Clocks

Add clock IDs for the video clocks.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200915124553.8056-2-narmstrong@baylibre.com

clk: tegra: Do not return 0 on failure

Return values from read_dt_param() will be either TRUE (1) or
FALSE (0), while dfll_fetch_pwm_params() returns 0 on success
or an ERR code on failure.

So this patch fixes the bug of returning 0 on failure.

Fixes: 36541f0499fe ("clk: tegra: dfll: support PWM regulator control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

clk: qcom: dispcc-sm8250: handle MMCX power domain

On SM8250 MMCX power domain is required to access MMDS_GDSC registers.
This power domain is expressed as mmcx-supply regulator property. Use
this regulator as MDSS_GDSC supply.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201023131925.334864-6-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: meson: g12: use devm variant to register notifiers

Until now, nothing was done to unregister the dvfs clock notifiers of the
Amlogic g12 SoC family. This is not great but this driver was not really
expected to be unloaded. With the ongoing effort to build everything as
module for this platform, this needs to be cleanly handled.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201021163847.595189-3-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: add devm variant of clk_notifier_register

Add a memory managed variant of clk_notifier_register() to make life easier
on clock consumers using notifiers

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201021163847.595189-2-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: meson: g12: drop use of __clk_lookup()

g12 clock controller used __clk_lookup() to get struct clk from a
struct clk_hw. This type of hack is no longer required as CCF now provides
the necessary functions to get this.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201021162147.563655-4-jbrunet@baylibre.com
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: add api to get clk consumer from clk_hw

clk_register() is deprecated. Using 'clk' member of struct clk_hw is
discouraged. With this constraint, it is difficult for driver to
register clocks using the clk_hw API and then use the clock with
the consumer API

This adds a simple helper, clk_hw_get_clk(), to get a struct clk from
a struct clk_hw. Like other clk_get() variant, each call to this helper
must be balanced with a call to clk_put(). To make life easier on the
consumers, a memory managed version is provided as well.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201021162147.563655-3-jbrunet@baylibre.com
Tested-by: Kevin Hilman <khilman@baylibre.com>
[sboyd@kernel.org: Fix kernel-doc]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: avoid devm_clk_release name clash

In clk-devres.c, devm_clk_release() is used to call clk_put() memory
managed clock. In clk.c the same name, in a different scope is used to call
clk_unregister().

As it stands, it is not really a problem but it does not readability,
especially if we need to call clk_put() on managed clock in clk.c

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201021162147.563655-2-jbrunet@baylibre.com
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: remove unneeded dead-store initialization

make clang-analyzer on x86_64 defconfig caught my attention with:

  drivers/clk/clk.c:423:19:
  warning: Value stored to 'parent' during its initialization is never read
  [clang-analyzer-deadcode.DeadStores]
          struct clk_core *parent = ERR_PTR(-ENOENT);
                           ^

Commit fc0c209c147f ("clk: Allow parents to be specified without string
names") introduced clk_core_fill_parent_index() with this unneeded
dead-store initialization.

So, simply remove this unneeded dead-store initialization to make
clang-analyzer happy.

As compilers will detect this unneeded assignment and optimize this anyway,
the resulting object code is identical before and after this change.

No functional change. No change to object code.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20201106094820.30167-1-lukas.bulwahn@gmail.com
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones

Let's call pm_runtime_get() here instead of calling the PM clk APIs
directly. This avoids a compilation problem on CONFIG_PM=n where the
pm_clk_runtime_{resume,suspend}() functions don't exist and covers the
intent, i.e. enable the clks for this device so we can program PLL
settings.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Taniya Das <tdas@codeaurora.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201114174408.579047-1-sboyd@kernel.org

clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init()

Clean up the first driver if the second driver can't be registered.

Fixes: 4ee9fe3e292b ("clk: qcom: lpass-sc7180: Disentangle the two clock devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201113101419.GC168908@mwanda
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: imx: scu: Make pd_np with static keyword

Fix the following sparse warning:

./clk-scu.c:23:20: warning: symbol 'pd_np' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8mq: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF && !CONFIG_MODULES):

    drivers/clk/imx/clk-imx8mq.c:626:34: warning:
        ‘imx8mq_clk_of_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8mp: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF && !CONFIG_MODULES):

    drivers/clk/imx/clk-imx8mp.c:751:34: warning:
        ‘imx8mp_clk_of_match’ defined but not used [-Wunused-const-variable=]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8mn: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF && !CONFIG_MODULES):

    drivers/clk/imx/clk-imx8mn.c:592:34: warning:
        ‘imx8mn_clk_of_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx8mm: drop of_match_ptr from of_device_id table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF && !CONFIG_MODULES):

    drivers/clk/imx/clk-imx8mm.c:641:34: warning:
        ‘imx8mm_clk_of_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: imx: gate2: Remove unused variable ret

This patch fixes below warning reported by coccicheck:

./clk-gate2.c:57:5-8: Unneeded variable: "ret". Return "0" on line 68

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks

LPASS Always ON Clock controller has one GFM mux to control VA
and TX clocks to codec macro on LPASS.
This patch adds support to this mux.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201026120221.18984-5-srinivas.kandagatla@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks

GFM Muxes in AUDIO_CC control clocks to LPASS WSA and RX Codec Macros.
This patch adds support to these muxes.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201026120221.18984-4-srinivas.kandagatla@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add support for LPASS Always ON Controller

Always ON Clock controller is a block inside LPASS which controls
1 Glitch free muxes to LPASS codec Macros.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201026120221.18984-3-srinivas.kandagatla@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add support for LPASS Audio Clock Controller

Audio Clock controller is a block inside LPASS which controls
2 Glitch free muxes to LPASS codec Macros.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201026120221.18984-2-srinivas.kandagatla@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: lpass-sc7180: Disentangle the two clock devices

The sc7180 lpass clock driver manages two different devices.  These
two devices were tangled together, using one probe and a lookup to
figure out the real probe.  I think it's cleaner to really separate
the probe for these two devices since they're really different things,
just both managed by the same driver.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201019154857.v5.2.I75c409497d4dea9daefa53ec5f93824081c4ecbe@changeid
Reviewed-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: lpasscc-sc7810: Use devm in probe

Let's convert the lpass clock control driver to use devm.  This is a
few more lines of code, but it will be useful in a later patch which
disentangles the two devices handled by this driver.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201019154857.v5.1.I4567b5e7e17bbb15ef063d447cb83fd43746cb18@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: camcc: Add camera clock controller driver for SC7180

Add support for the camera clock controller found on SC7180 based devices.
This would allow camera drivers to probe and control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1602873815-1677-5-git-send-email-tdas@codeaurora.org
[sboyd@kernel.org: Mark hw array static, add UL to big vco numbers]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings.

The Camera Subsystem clock provider have a bunch of generic properties
that are needed in a device tree. Add a YAML schemas for those.

Add clock ids for camera clocks which are required to bring the camera
subsystem out of reset.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1602873815-1677-4-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs

Add programming sequence support for managing the Agera PLLs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1602873815-1677-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: clk-alpha-pll: Add support for helper functions

Introduce clk_alpha_pll_write_config and alpha_pll_check_rate_margin
helper functions to be across PLL configure functions and PLL set rate
functions.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1602873815-1677-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fix a kernel-doc markup

clk_get_duty_cycle -> clk_get_scaled_duty_cycle

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/b2336f3f3cdfe6e1a2d3a7a056ab7ccc7a81b945.1603469755.git.mchehab+huawei@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>