git.maquefel.me Git - linux.git/log

iio: adc: ad7944: Consolidate spi_sync() wrapper

Since commit 6020ca4de8e5 ("iio: adc: ad7944: use spi_optimize_message()"),
The helper functions wrapping spi_sync() for 3-wire and 4-wire modes are
virtually identical. Since gpiod_set_value_cansleep() does a NULL check
internally, we can consolidate the two functions into one and avoid
switch statements at the call sites.

The default cases of the removed switch statement were just to make the
compiler happy and are not reachable since the mode is validated in the
probe function. So removing those should be safe.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240412-ad7944-consolidate-msg-v1-1-7fdeff89172f@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list

Before all supported sensors except for MPU{9150,9250,9255} were not
allowed to use i2c-gate in the bindings which excluded quite a few
supported sensors where this functionality is supported.

Switch the list of sensors to ones where the Linux driver explicitly
disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
the driver is also based on "default: return true" this should scale
better into the future.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240408-mpu6050-i2c-gate-v1-1-621f051ce7de@z3ntu.xyz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

A slightly less convincing usecase than many as all the failure paths
are wrapped up in a call to a per fwnode_handle utility function.
The complexity in that function is sufficient that it makes sense to
factor it out even if it this new auto cleanup would enable simpler
returns if the code was inline at the call site. Hence I've left it alone.

Cc: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240330185305.1319844-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

Note this would have made the bug fixed in the previous path much
less likely as it allows for direct returns.

Took advantage of dev_err_probe() to futher simplify things given no
longer a need for the goto err.

Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240330185305.1319844-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32: Fixing err code to not indicate success

This path would result in returning 0 / success on an error path.

Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Fixes: 95bc818404b2 ("iio: adc: stm32-adc: add support of generic channels binding")
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240330185305.1319844-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: ABI: document in_temp_input file

For example the BMP280 barometric pressure sensor on Qualcomm
MSM8974-based Nexus 5 smartphone exposes such file in sysfs.
Document it.

Whilst here, fix up incorrect repeated use of X as a wildcard
for in_tempY_input.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240406-in_temp_input-v1-1-a1744a4a49e3@z3ntu.xyz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: apds9306: Improve apds9306_write_event_config()

Simplify event configuration flow.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Link: https://lore.kernel.org/all/20240310124237.52fa8a56@jic23-huawei/
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240405104641.29478-1-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: ltc2983: support vdd regulator

Add support for the power supply regulator.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240404-ltc2983-misc-improv-v5-2-c1f58057fcea@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: temperature: ltc2983: document power supply

Add a property for the VDD power supply regulator.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240404-ltc2983-misc-improv-v5-1-c1f58057fcea@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7173: Fix ! vs ~ typo in ad7173_sel_clk()

This was obviously supposed to be a bitwise negate instead of logical.

Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/5401c681-c4aa-4fab-8c8c-8f0a379e2687@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: apds9306: Fix off by one in apds9306_sampling_freq_get()

The > comparison needs to be >= to prevent an out of bounds access.

Fixes: 620d1e6c7a3f ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/69c5cb83-0209-40ff-a276-a0ae5e81c528@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: Add spi-3wire option

Add a setup function implementation to the spi module to enable spi-3wire
when specified in the device-tree. If spi-3wire is not specified in the
device-tree, NULL is returned as bus pre-initialization. This behavior
is identical to the i2c initialization, hence the default initialization.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-9-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: Add comment to probe

Add a comment to the probe() function to describe the passed function
pointer argument in particular.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-8-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: Reorder probe initialization

Bring indio_dev, setup() and data initialization to begin of the probe()
function to increase readability. Access members through data
pointer to assure implicitely the driver's data instance is correctly
initialized and functional.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-7-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: Pass function pointer to core

Provide a way for bus specific pre-configuration by adding a function
pointer argument to the driver core's probe() function, and keep
the driver core implementation bus independent.

In case NULL was passed, a regmap_write() shall initialize all bits of
the data_format register, else regmap_update() is used. In this way
spi and i2c are covered.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-6-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: accel: adxl345: Add spi-3wire

Add spi-3wire because the device allows to be configured for spi 3-wire
communication.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240401194906.56810-5-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: Move defines to header

Move defines from core to the header file. Keep the defines block together
in one location.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: Group bus configuration

Group the indio_dev initialization and bus configuration for improved
readability.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl345: Make data_range obsolete

Replace write() data_format by regmap_update_bits() to keep bus specific
pre-configuration which might have happened before on the same register.
The bus specific bits in data_format register then need to be masked out,

Remove the data_range field from the struct adxl345_data, because it is
not used anymore.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: pac1934: Use device_for_each_available_child_node_scoped() to simplify error handling.

Also change both firmware parsing functions to return meaningful errors.
Whilst for the ACPI case this isn't that useful, for the generic fwnode
case we can return the errors coming from the property parsing instead
of just whether we succeeded or not.

Cc: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ad3552: Use __free(fwnode_handle) to simplify error handling.

By using this scoped based cleanup direct returns on errors are enabled
simplifying the code.

Cc: Mihail Chindris <mihail.chindris@analog.com>
Cc: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-8-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: frequency: admfm2000: Use device_for_each_child_node_scoped() to simplify error paths.

This loop definition automatically release the fwnode_handle on early exit
simplifying error handling paths.

Cc: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7173: Use device_for_each_child_node_scoped() to simplify error paths.

This loop definition automatically releases the fwnode_handle on early
exit such as the error cases seen here. This reducing boilerplate and
the chance of a resource leak being introduced in future.

Cc: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad4130: Use device_for_each_child_node_scoped() to simplify error paths.

This loop definition removes the need for manual releasing of the fwnode_handle
in early exit paths (here an error path) allow simplfication of the code
and reducing the chance of future modificiations not releasing
fwnode_handle correctly.

Cc: Cosmin Tanislav <demonsingur@gmail.com>
Cc: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ab8500-gpadc: Use device_for_each_child_node_scoped() to simplify erorr paths.

This new loop definition automatically releases the handle on early exit
reducing the chance of bugs that cause resource leaks.

Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ab8500-gpadc: Fix kernel-doc parameter names.

Seems these got renamed at somepoint but the documentation wasn't
updated to match.

Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ad5770r: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330185305.1319844-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ad3552r: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

Removing the goto err; statements also allows more extensive use of
dev_err_probe() further simplifying the code.

Cc: Mihail Chindris <mihail.chindris@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330185305.1319844-8-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7944: use spi_optimize_message()

This modifies the ad7944 driver to use spi_optimize_message() to reduce
CPU usage and increase the max sample rate by avoiding repeating
validation of the spi message on each transfer.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240328-ad7944-spi-optimize-message-v2-1-a142b2576379@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7944: simplify adi,spi-mode property parsing

This simplifies the adi,spi-mode property parsing by using
device_property_match_property_string() instead of two separate
functions. Also, the error return value is now more informative
in cases where there was a problem parsing the property.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240325-ad7944-cleanups-v3-1-3a19120cdd06@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ti-dac5571: Add DAC081C081 support

The DAC081C081 is a TI DAC whose software interface is compatible with
the DAC5571. It is the 8-bit version of the DAC121C081, already
supported by the DAC5571 driver. Extends the driver to support this
chip.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com <mailto:sean@geanix.com>>
Link: https://lore.kernel.org/r/20240325203245.31660-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support

The DAC081C081 is a TI DAC whose software interface is compatible with
the DAC5571. It is the 8-bit version of the DAC121C081, already
supported by the DAC5571 bindings. Extends the bindings to support this
chip.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20240325203245.31660-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: health: max30102: add support for max30101

The Maxim max30101 is the replacement for the max30105, which is no
longer recommended for future designs.

Their internal structure is identical, as well as the register map,
configuration options and sensitivity, which allows for code recycling.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240324-max30101-v2-2-611deb510c97@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: health: maxim,max30102: add max30101

The Maxim max30101 is the replacement for the max30105, which is no
longer recommended for future designs.

The max30101 does not require new properties, and it can be described
with the existing ones for the max30105, which will be used as a
fallback compatible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240324-max30101-v2-1-611deb510c97@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: hsc030pa: Use spi_read()

Use spi_read() instead of hand-writing it.
It is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/8327ac591d244ac85aa83c01e559076159c7ba12.1711283728.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: BMP280 core driver headers sorting

Sort headers in alphabetical order.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240319002925.2121016-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

docs: iio: new docs for ad7944 driver

This adds a new page to document how to use the ad7944 ADC driver.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240322-mainline-ad7944-doc-v2-2-0923d35d5596@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: add Documentation/iio/ to IIO subsystem

Patches touching the IIO subsystem documentation should also be sent to
the IIO mailing list.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240322-mainline-ad7944-doc-v2-1-0923d35d5596@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7944: Add support for "3-wire mode"

This adds support for AD7944 ADCs wired in "3-wire mode". (NOTE: 3-wire
is the datasheet name for this wiring configuration and has nothing to
do with SPI_3WIRE.)

In the 3-wire mode, the SPI controller CS line can be wired to the CNV
line on the ADC and used to trigger conversions rather that using a
separate GPIO line.

The turbo/chain mode compatibility check at the end of the probe
function is technically can't be triggered right now but adding it now
anyway so that we don't forget to add it later when support for
daisy-chaining is added.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240314-mainline-ad7944-3-wire-mode-v2-1-d469da0705d2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl367: Remove second semicolon

There is a statement with two semicolons. Remove the second one, it
is redundant.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240315091436.2430227-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: inkern: move to the cleanup.h magic

Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.

While at it, also use __free(kfree) where allocations are done and drop
obvious comment in iio_channel_read_min().

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240229-iio-use-cleanup-magic-v3-4-c3d34889ae3c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: iio: core: move to the cleanup.h magic

Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240229-iio-use-cleanup-magic-v3-3-c3d34889ae3c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: trigger: move to the cleanup.h magic

Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240229-iio-use-cleanup-magic-v3-2-c3d34889ae3c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: move to cleanup.h magic

Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.

Note that we keep the plain mutex calls in the
iio_device_release|acquire() APIs since in there the macros would likely
not help much (as we want to keep the lock acquired when he leave the
APIs).

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240229-iio-use-cleanup-magic-v3-1-c3d34889ae3c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: add WoM suspend wakeup with low-power mode

Add wakeup from suspend for WoM when enabled and put accel in low-power
mode when suspended. Requires rewriting pwr_mgmt_1 register handling and
factorize out accel LPF settings. Use a low-power rate similar to the chip
sampling rate but always lower for a best match of the sampling rate while
saving power and adjust threshold to follow the required roc value.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-5-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: add new interrupt handler for WoM events

Add new interrupt handler for generating WoM event from int status register
bits. Launch from interrupt the trigger poll function for data buffer.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-4-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: add WoM event as accel event

Add WoM (roc rising) event as accel x_or_y_or_z event for all chips >=
MPU-6500. This requires to create new MPU-6500 channels as default and
MPU-6050 channels for older chips.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-3-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: add WoM (Wake-on-Motion) sensor

WoM is a threshold test on accel value comparing actual sample with
previous one. It maps best to roc rising event.

Add support of a new WOM sensor and functions for handling the associated
roc_rising event. The event value is in SI units. Ensure WOM is stopped and
restarted at suspend-resume, handle usage with buffer data ready interrupt,
and handle change in sampling rate impacting already set roc value.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-2-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: humidity: hdc3020: add reset management

The HDC3020 provides an active low reset signal that must be handled if
connected. Asserting this signal turns the device into Trigger-on Demand
measurement mode, reducing its power consumption when no measurements
are required like in low-power modes.

According to the datasheet, the longest "Reset Ready" is 3 ms, which is
only taken into account if the reset signal is defined.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-3-48bc02b5241b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: humidity: hdc3020: add reset-gpios

The HDC3020 provides an active low reset signal that is still not
described in the bindings.

Add reset-gpios to the bindings and the example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-2-48bc02b5241b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: humidity: hdc3020: add power management

The HDC3020 sensor carries out periodic measurements during normal
operation, but as long as the power supply is enabled, it will carry on
in low-power modes. In order to avoid that and reduce power consumption,
the device can be switched to Trigger-on Demand mode, and if possible,
turn off its regulator.

According to the datasheet, the maximum "Power Up Ready" is 5 ms.

Add resume/suspend pm operations to manage measurement mode and
regulator state.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-1-48bc02b5241b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7944: add driver for AD7944/AD7985/AD7986

This adds a driver for the Analog Devices Inc. AD7944, AD7985, and
AD7986 ADCs. These are a family of pin-compatible ADCs that can sample
at rates up to 2.5 MSPS.

The initial driver adds support for sampling at lower rates using the
usual IIO triggered buffer and can handle all 3 possible reference
voltage configurations.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240304-ad7944-mainline-v5-2-f0a38cea8901@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add ad7944 ADCs

This adds a new binding for the Analog Devices, Inc. AD7944, AD7985, and
AD7986 ADCs.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304-ad7944-mainline-v5-1-f0a38cea8901@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: twl4030-madc: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304144037.1036390-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7173: add support for additional models

Add support for Analog Devices AD7172-2, AD7175-8, AD7177-2.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240306110956.13167-4-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7173: improve chip id's defines

Rename to AD7172_2_ID to avoid confusion with _4 model.
Reorder id's by reg value.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240306110956.13167-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: adc: ad7173: add support for additional models

Add support for: AD7172-2, AD7175-8, AD7177-2.
AD7172-4 does not feature an internal reference, check for external
reference presence.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240306110956.13167-2-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: Add support for APDS9306 Light Sensor

Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor.
It has two channels - ALS and CLEAR. The ALS (Ambient Light Sensor)
channel approximates the response of the human-eye providing direct
read out where the output count is proportional to ambient light levels.
It is internally temperature compensated and rejects 50Hz and 60Hz flicker
caused by artificial light sources. Hardware interrupt configuration is
optional. It is a low power device with 20 bit resolution and has
configurable adaptive interrupt mode and interrupt persistence mode.
The device also features inbuilt hardware gain, multiple integration time
selection options and sampling frequency selection options.

This driver also uses the IIO GTS (Gain Time Scale) Helpers Namespace for
Scales, Gains and Integration time implementation.

Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-6-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: Avago APDS9306

Extend avago,apds9300.yaml schema file to support apds9306 device.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-5-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: adps9300: Update interrupt definitions

Include irq.h and irq level macro in the example for readability

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-4-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: adps9300: Add missing vdd-supply

All devices covered by the binding have a vdd supply.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-3-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: Merge APDS9300 and APDS9960 schemas

Merge very similar schemas for APDS9300 and APDS9960.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/4e785d2e-d310-4592-a75a-13549938dcef@linaro.org/
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-2-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Calculate alloc_size only once in iio_device_alloc()

No need to rewrite the value, instead use 'else' branch.
This will also help further refactoring the code later on.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304140650.977784-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Leave private pointer NULL when no private data supplied

In iio_device_alloc() when size of the private data is 0,
the private pointer is calculated to point behind the valid data.
Leave it NULL when no private data supplied.

Fixes: 6d4ebd565d15 ("iio: core: wrap IIO device into an iio_dev_opaque object")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304140650.977784-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: drop casting to void in dev_set_drvdata

The C standard specifies that there is no need to cast from a pointer to
void [1]. Therefore, it can be safely dropped.

[1] C Standard Committee: https://c0x.shape-of-code.com/6.3.2.3.html

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-void_in_dev_set_drvdata-v1-4-ae39027d740b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: humidity: hts211: drop casting to void in dev_set_drvdata

The C standard specifies that there is no need to cast from a pointer to
void [1]. Therefore, it can be safely dropped.

[1] C Standard Committee: https://c0x.shape-of-code.com/6.3.2.3.html

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-void_in_dev_set_drvdata-v1-3-ae39027d740b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

io: light: st_uvis25: drop casting to void in dev_set_drvdata

The C standard specifies that there is no need to cast from a pointer to
void [1]. Therefore, it can be safely dropped.

[1] C Standard Committee: https://c0x.shape-of-code.com/6.3.2.3.html

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-void_in_dev_set_drvdata-v1-2-ae39027d740b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7173: add AD7173 driver

The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel
applications or higher speed multiplexed applications. The Sigma-Delta
ADC is intended primarily for measurement of signals close to DC but also
delivers outstanding performance with input bandwidths out to ~10kHz.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240228110622.25114-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad_sigma_delta: Add optional irq selection

Add optional irq_num attribute to ad_sigma_delta_info structure for
selecting the used interrupt line for ADC's conversion completion.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240228110622.25114-2-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: adc: add AD7173

The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel applications
or higher speed multiplexed applications. The Sigma-Delta ADC is intended
primarily for measurement of signals close to DC but also delivers
outstanding performance with input bandwidths out to ~10kHz.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240228110622.25114-1-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: spear_adc: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240228203023.3609181-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: rcar-gyroadc: use for_each_available_child_node_scoped()

Using automated cleanup to replace of_node_put() handling allows for
a simplfied flow by enabling direct returns on errors.

Non available child nodes should never have been considered; that
is ones where status != okay and was defined.

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: rzg2l_adc: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240224123215.161469-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temp: ltc2983: Use __free(fwnode_handle) and device_for_each_node_scoped()

This use of the new cleanup.h scope based freeing infrastructure allows
us to exit directly from error conditions and in the good path with
the reference obtained from fwnode_find_reference() (which may be an error
pointer) automatically released.

Similarly the _scoped() version of device_for_each_child_node()
removes the need for the manual calling of fwnode_handl_put() in
paths where the code exits the loop early.

Tidy up some unusual indentation in a dev_dbg() whilst here.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240224123215.161469-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: hx711: Switch from of specific to fwnode property handling.

Allows driver to be used with other firmware types and removes an
example that might be copied into new IIO drivers.

Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: fxls8962af: Switch from of specific to fwnode based properties.

Only the irq was retrieved using an of specific accessor. Switch to the
fwnode equivalent and adjust headers. Also include missing mod_devicetable.h
and irq.h.

Cc: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-8-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: mma8452: Switch from of specific to fwnode property handling.

In this case only use was to get an irq so easily converted.
Also include linux/mod_devicetable.h for struct of_device_id definition.

Using the generic firmware handling, this driver may be used with other
firmware types. This also removes an example that might get copied into
other drivers leaving them unable to be used with alternative firmware
types.

Cc: Haibo Chen <haibo.chen@nxp.com>
Reviewed-and-tested-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7192: Convert from of specific to fwnode property handling

Enables use of with other firmwware types.
Removes a case of device tree specific handlers that might get copied
into new drivers.

Cc: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7292: Switch from of specific to fwnode property handling

This reduces the wrong of device tree only IIO drivers that might
be copied by converting over this simple case.
Makes use of the new _scoped() handling to automatically release
the fwnode_handle on early exit from the loop.

Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7124: Switch from of specific to fwnode based property handling

Using the generic firmware data access functions from property.h
provides a number of advantages:
1) Works with different firmware types.
2) Doesn't provide a 'bad' example for new IIO drivers.
3) Lets us use the new _scoped() loops with automatic reference count
cleanup for fwnode_handle

Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: fsl-imx25-gcq: Use devm_* and dev_err_probe() to simplify probe

Custom callbacks are need for regulators (so there is a handle to read
the voltage from) and the clk because it is retrieved from the parent
rather than directly from firmware description.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: fsl-imx25-gcq: Switch from of specific handing to fwnode based.

Using the generic firmware data access functions from property.h
provides a number of advantages:
1) Works with different firmware types.
2) Doesn't provide a 'bad' example for new IIO drivers.
3) Lets us use the new _scoped() loops with automatic reference count
cleanup for fwnode_handle

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ltc2688: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240217164249.921878-16-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: addac: ad74413r: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

The use of fwnode_for_each_available_child_node() here is assumed
to have been down to a false assumption that device_for_each_child_node()
doesn't check avaialble - so this transition to the scoped
device_for_each_child_node_scoped() is equivalent.

Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240217164249.921878-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: max11410: Use device_for_each_child_node_scoped()

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240217164249.921878-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

device property: Introduce device_for_each_child_node_scoped()

Similar to recently propose for_each_child_of_node_scoped() this
new version of the loop macro instantiates a new local
struct fwnode_handle * that uses the __free(fwnode_handle) auto
cleanup handling so that if a reference to a node is held on early
exit from the loop the reference will be released. If the loop
runs to completion, the child pointer will be NULL and no action will
be taken.

The reason this is useful is that it removes the need for
fwnode_handle_put() on early loop exits. If there is a need
to retain the reference, then return_ptr(child) or no_free_ptr(child)
may be used to safely disable the auto cleanup.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.

Useful where the fwnode_handle was obtained from a call such as
fwnode_find_reference() as it will safely do nothing if IS_ERR() is true
and will automatically release the reference on the variable leaving
scope.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

device property: Move fwnode_handle_put() into property.h

By having this function as static inline in the header, the compiler
is able to see if can optmize the call out if (IS_ERR_OR_NULL(fwnode))
This will allow a simpler DEFINE_FREE() call in the following patch.

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240217164249.921878-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Merge tag 'efi-fixes-for-v6.9-2' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- Fix logic that is supposed to prevent placement of the kernel image
   below LOAD_PHYSICAL_ADDR

- Use the firmware stack in the EFI stub when running in mixed mode

- Clear BSS only once when using mixed mode

- Check efi.get_variable() function pointer for NULL before trying to
   call it

* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: fix panic in kdump kernel
  x86/efistub: Don't clear BSS twice in mixed mode
  x86/efistub: Call mixed mode boot services on the firmware's stack
  efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address

Merge tag 'x86-urgent-2024-03-24' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:

- Ensure that the encryption mask at boot is properly propagated on
   5-level page tables, otherwise the PGD entry is incorrectly set to
   non-encrypted, which causes system crashes during boot.

- Undo the deferred 5-level page table setup as it cannot work with
   memory encryption enabled.

- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
   to the default value but the cached variable is not, so subsequent
   comparisons might yield the wrong result and as a consequence the
   result prevents updating the MSR.

- Register the local APIC address only once in the MPPARSE enumeration
   to prevent triggering the related WARN_ONs() in the APIC and topology
   code.

- Handle the case where no APIC is found gracefully by registering a
   fake APIC in the topology code. That makes all related topology
   functions work correctly and does not affect the actual APIC driver
   code at all.

- Don't evaluate logical IDs during early boot as the local APIC IDs
   are not yet enumerated and the invoked function returns an error
   code. Nothing requires the logical IDs before the final CPUID
   enumeration takes place, which happens after the enumeration.

- Cure the fallout of the per CPU rework on UP which misplaced the
   copying of boot_cpu_data to per CPU data so that the final update to
   boot_cpu_data got lost which caused inconsistent state and boot
   crashes.

- Use copy_from_kernel_nofault() in the kprobes setup as there is no
   guarantee that the address can be safely accessed.

- Reorder struct members in struct saved_context to work around another
   kmemleak false positive

- Remove the buggy code which tries to update the E820 kexec table for
   setup_data as that is never passed to the kexec kernel.

- Update the resource control documentation to use the proper units.

- Fix a Kconfig warning observed with tinyconfig

* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/64: Move 5-level paging global variable assignments back
  x86/boot/64: Apply encryption mask to 5-level pagetable update
  x86/cpu: Add model number for another Intel Arrow Lake mobile processor
  x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
  Documentation/x86: Document that resctrl bandwidth control units are MiB
  x86/mpparse: Register APIC address only once
  x86/topology: Handle the !APIC case gracefully
  x86/topology: Don't evaluate logical IDs during early boot
  x86/cpu: Ensure that CPU info updates are propagated on UP
  kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
  x86/pm: Work around false positive kmemleak report in msr_build_context()
  x86/kexec: Do not update E820 kexec table for setup_data
  x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'

Merge tag 'sched-urgent-2024-03-24' of git://git./linux/kernel/git/tip/tip

Pull scheduler doc clarification from Thomas Gleixner:
"A single update for the documentation of the base_slice_ns tunable to
  clarify that any value which is less than the tick slice has no effect
  because the scheduler tick is not guaranteed to happen within the set
  time slice"

* tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation

Merge tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:
"This has a set of swiotlb alignment fixes for sometimes very long
  standing bugs from Will. We've been discussion them for a while and
  they should be solid now"

* tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
  iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
  swiotlb: Fix alignment checks when both allocation and DMA masks are present
  swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
  swiotlb: Enforce page alignment in swiotlb_alloc()
  swiotlb: Fix double-allocation of slots due to broken alignment handling

efi: fix panic in kdump kernel

Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.

Tested with QEMU and OVMF firmware.

Fixes: bad267f9e18f ("efi: verify that variable services are supported")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

x86/efistub: Don't clear BSS twice in mixed mode

Clearing BSS should only be done once, at the very beginning.
efi_pe_entry() is the entrypoint from the firmware, which may not clear
BSS and so it is done explicitly. However, efi_pe_entry() is also used
as an entrypoint by the mixed mode startup code, in which case BSS will
already have been cleared, and doing it again at this point will corrupt
global variables holding the firmware's GDT/IDT and segment selectors.

So make the memset() conditional on whether the EFI stub is running in
native mode.

Fixes: b3810c5a2cc4a666 ("x86/efistub: Clear decompressor BSS in native EFI entrypoint")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

x86/efistub: Call mixed mode boot services on the firmware's stack

Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.

In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.

Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit

5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code")

moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.

While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.

So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.

Cc: <stable@kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

x86/boot/64: Move 5-level paging global variable assignments back

Commit 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging
global variables") moved assignment of 5-level global variables to later
in the boot in order to avoid having to use RIP relative addressing in
order to set them. However, when running with 5-level paging and SME
active (mem_encrypt=on), the variables are needed as part of the page
table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(),
etc.). Since the variables haven't been set, the page table manipulation
is done as if 4-level paging is active, causing the system to crash on
boot.

While only a subset of the assignments that were moved need to be set
early, move all of the assignments back into check_la57_support() so that
these assignments aren't spread between two locations. Instead of just
reverting the fix, this uses the new RIP_REL_REF() macro when assigning
the variables.

Fixes: 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging global variables")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/2ca419f4d0de719926fd82353f6751f717590a86.1711122067.git.thomas.lendacky@amd.com

x86/boot/64: Apply encryption mask to 5-level pagetable update

When running with 5-level page tables, the kernel mapping PGD entry is
updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC,
which, when SME is active (mem_encrypt=on), results in a page table
entry without the encryption mask set, causing the system to crash on
boot.

Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so
that the encryption mask is set for the PGD entry.

Fixes: 533568e06b15 ("x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/8f20345cda7dbba2cf748b286e1bc00816fe649a.1711122067.git.thomas.lendacky@amd.com