qemu-common.h: Update copyright string to 2021

Update the common copyright string that we use in
-version reports, About dialogs, etc, to 2021.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210309162258.28633-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

tests/fp/fp-test: Replace the word 'blacklist'

Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.

[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303184644.1639691-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

qemu-options: Replace the word 'blacklist'

Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.

[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303184644.1639691-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

seccomp: Replace the word 'blacklist'

Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.

[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303184644.1639691-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

scripts/tracetool: Replace the word 'whitelist'

Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the words "whitelist"
appropriately.

[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210303184644.1639691-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

ui: Replace the word 'whitelist'

Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the words "whitelist"
appropriately.

[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210303184644.1639691-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

virtio-gpu: Adjust code space style

Fix code style. Operator needs align with eight spaces, and delete line space.

Signed-off-by: lijiejun <a_lijiejun@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1615292050-108748-1-git-send-email-a_lijiejun@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

exec/memory: Use struct Object typedef

We forward-declare Object typedef in "qemu/typedefs.h" since commit
ca27b5eb7cd ("qom/object: Move Object typedef to 'qemu/typedefs.h'").
Use it everywhere to make the code simpler.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210225182003.3629342-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

fuzz-test: remove unneccessary debugging flags

These flags cause the output to look strange for 'make check', and
they aren't needed to reproduce bugs, if they reappear.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216181316.794276-1-alxndr@bu.edu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

net: Use id_generate() in the network subsystem, too

We already got a global function called id_generate() to create unique
IDs within QEMU. Let's use it in the network subsytem, too, instead of
inventing our own ID scheme here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210215090225.1046239-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

MAINTAINERS: Fix the location of tools manuals

The qemu-img.rst, qemu-nbd.rst, virtfs-proxy-helper.rst, qemu-trace-stap.rst,
and virtiofsd.rst manuals were moved to docs/tools, so this update MAINTAINERS
accordingly.

Fixes: a08b4a9fe6c ("docs: Move tools documentation to tools manual")
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210204135425.1380280-1-wainersm@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

vhost_user_gpu: Drop dead check for g_malloc() failure

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210126124240.2081959-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

backends/dbus-vmstate: Fix short read error handling

When dbus_vmstate_post_load() fails, it complains to stderr.  Except
on short read, where it checks with g_return_val_if_fail().  This
fails silently if G_DISABLE_CHECKS is undefined (it should be), or
else pads the short read with uninitialized bytes.

Replace g_return_val_if_fail() by a proper error check.

Fixes: 5010cec2bc87dafab39b3913c8ca91f88df9c540
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210126124240.2081959-2-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/hexagon/gen_tcg_funcs: Fix a typo

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20210225181507.3624509-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/elf_ops: Fix a typo

g_mapped_file_new_from_fd()'s parameter is named 'writable'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: David Edmondson <dme@dme.org>
Message-Id: <20210225181344.3623720-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

scsi: Silence gcc warning

On Fedora 33, gcc 10.2.1 notes that scsi_cdb_length(buf) can set
len==-1, which in turn overflows g_malloc():

[5/5] Linking target qemu-system-x86_64
In function ‘scsi_disk_new_request_dump’,
    inlined from ‘scsi_new_request’ at ../hw/scsi/scsi-disk.c:2608:9:
../hw/scsi/scsi-disk.c:2582:19: warning: argument 1 value ‘18446744073709551612’ exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=]
 2582 |     line_buffer = g_malloc(len * 5 + 1);
      |                   ^

Silence it with a decent assertion, since we only convert a buffer to
bytes when we have a valid cdb length.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210209152350.207958-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Various spelling fixes

An assorted set of spelling fixes in various places.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210307' into staging

qemu-sparc queue

# gpg: Signature made Sun 07 Mar 2021 12:07:13 GMT
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210307: (42 commits)
  esp: add support for unaligned accesses
  esp: implement non-DMA transfers in PDMA mode
  esp: add trivial implementation of the ESP_RFLAGS register
  esp: convert cmdbuf from array to Fifo8
  esp: convert ti_buf from array to Fifo8
  esp: transition to message out phase after SATN and stop command
  esp: add maxlen parameter to get_cmd()
  esp: raise interrupt after every non-DMA byte transferred to the FIFO
  esp: remove old deferred command completion mechanism
  esp: defer command completion interrupt on incoming data transfers
  esp: latch individual bits in ESP_RINTR register
  esp: implement FIFO flush command
  esp: add 4 byte PDMA read and write transfers
  esp: remove pdma_origin from ESPState
  esp: use FIFO for PDMA transfers between initiator and device
  esp: fix PDMA target selection
  esp: rename get_cmd_cb() to esp_select()
  esp: remove CMD pdma_origin
  esp: use in-built TC to determine PDMA transfer length
  esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-hex-20210306' into staging

Add hexagon to include/exec/poison.h
Two Coverity fixes for target/hexagon/

# gpg: Signature made Sun 07 Mar 2021 01:37:05 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-hex-20210306:
  target/hexagon/opcodes: Add missing varargs cleanup
  target/hexagon: Fix shift amount check in fASHIFTL/fLSHIFTR
  exec: Poison Hexagon target-specific definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210306' into staging

TCI build fix and cleanup
Streamline tb_lookup
Fixes for tcg/aarch64

# gpg: Signature made Sat 06 Mar 2021 21:34:46 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210306: (27 commits)
  accel/tcg: Precompute curr_cflags into cpu->tcg_cflags
  include/exec: lightly re-arrange TranslationBlock
  accel/tcg: drop the use of CF_HASH_MASK and rename params
  accel/tcg: move CF_CLUSTER calculation to curr_cflags
  accel/tcg: rename tb_lookup__cpu_state and hoist state extraction
  tcg/tci: Merge mov, not and neg operations
  tcg/tci: Merge bswap operations
  tcg/tci: Merge extension operations
  tcg/tci: Merge basic arithmetic operations
  tcg/tci: Reduce use of tci_read_r64
  tcg/tci: Remove tci_read_r32s
  tcg/tci: Remove tci_read_r32
  tcg/tci: Remove tci_read_r16s
  tcg/tci: Remove tci_read_r16
  tcg/tci: Remove tci_read_r8s
  tcg/tci: Remove tci_read_r8
  tcg/tci: Merge identical cases in generation (load/store opcodes)
  tcg/tci: Merge identical cases in generation (conditional opcodes)
  tcg/tci: Merge identical cases in generation (deposit opcode)
  tcg/tci: Merge identical cases in generation (exchange opcodes)
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/renesas-20210306' into staging

Renesas patches queue

- MMU prototype cleanups
- Clarify licenses
- Fine-grained Kconfig entries for SH-4 devices

# gpg: Signature made Sat 06 Mar 2021 15:30:46 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/renesas-20210306:
  hw/sh4/sh7750_regs: Replace link to license by its full content
  hw/sh4: Remove now unused CONFIG_SH4 from Kconfig
  hw/pci-host: Introduce SH_PCI Kconfig entry
  hw/block: Introduce TC58128 eeprom Kconfig entry
  hw/timer: Introduce SH_TIMER Kconfig entry
  hw/char: Introduce SH_SCI Kconfig entry
  hw/intc: Introduce SH_INTC Kconfig entry
  hw/sh4: Add missing Kconfig dependency on SH7750 for the R2D board
  hw/sh4: Add missing license
  target/sh4: Remove unused definitions
  target/sh4: Let get_physical_address() use MMUAccessType access_type
  target/sh4: Remove unused 'int access_type' argument
  target/sh4: Replace magic value by MMUAccessType definitions
  target/sh4: Fix code style for checkpatch.pl

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix tracing vs -daemonize (Daniel)
* detect invalid CFI configuration (Daniele)
* 32-bit PVH fix (David)
* forward SCSI passthrough host-status to the SCSI HBA (Hannes)
* detect ill-formed id in QMP object-add (Kevin)
* miscellaneous bugfixes and cleanups (Keqian, Kostiantyn, myself, Peng Liang)
* add nodelay option for chardev (myself)
* deprecate -M kernel-irqchip=off on x86 (myself)
* keep .d files (myself)
* Fix -trace file (myself)

# gpg: Signature made Sat 06 Mar 2021 10:43:12 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (23 commits)
  meson: Stop if cfi is enabled with system slirp
  trace: skip qemu_set_log_filename if no "-D" option was passed
  trace: fix "-trace file=..."
  meson: adjust timeouts for some slower tests
  build-sys: invoke ninja with -d keepdepfile
  qemu-option: do not suggest using the delay option
  scsi: move host_status handling into SCSI drivers
  scsi: inline sg_io_sense_from_errno() into the callers.
  scsi-generic: do not snoop the output of failed commands
  scsi: Add mapping for generic SCSI_HOST status to sense codes
  scsi: Rename linux-specific SG_ERR codes to generic SCSI_HOST error codes
  qemu-config: add error propagation to qemu_config_parse
  x86/pvh: extract only 4 bytes of start address for 32 bit kernels
  elf_ops: correct loading of 32 bit PVH kernel
  lsilogic: Use PCIDevice::exit instead of DeviceState::unrealize
  accel: kvm: Add aligment assert for kvm_log_clear_one_slot
  accel: kvm: Fix memory waste under mismatch page size
  vl.c: do not execute trace_init_backends() before daemonizing
  qom: Check for wellformed id in user_creatable_add_type()
  chardev: add nodelay option
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging

target-arm queue:
 * sbsa-ref: remove cortex-a53 from list of supported cpus
 * sbsa-ref: add 'max' to list of allowed cpus
 * target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
 * npcm7xx: add EMC model
 * xlnx-zynqmp: Remove obsolete 'has_rpu' property
 * target/arm: Speed up aarch64 TBL/TBX
 * virtio-mmio: improve virtio-mmio get_dev_path alog
 * target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
 * target/arm: Restrict v8M IDAU to TCG
 * target/arm/cpu: Update coding style to make checkpatch.pl happy
 * musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
 * Add new board: mps3-an524

# gpg: Signature made Mon 08 Mar 2021 11:56:24 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits)
  hw/arm/mps2: Update old infocenter.arm.com URLs
  docs/system/arm/mps2.rst: Document the new mps3-an524 board
  hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
  hw/arm/mps2-tz: Stub out USB controller for mps3-an524
  hw/arm/mps2-tz: Add new mps3-an524 board
  hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
  hw/arm/mps2-tz: Support ROMs as well as RAMs
  hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
  hw/arm/mps2-tz: Make RAM arrangement board-specific
  hw/arm/mps2-tz: Allow boards to have different PPCInfo data
  hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
  hw/arm/mps2-tz: Move device IRQ info to data structures
  hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
  hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
  hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
  hw/arm/mps2-tz: Make number of IRQs board-specific
  hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
  hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
  hw/misc/mps2-fpgaio: Support SWITCH register
  hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/mps2: Update old infocenter.arm.com URLs

Update old infocenter.arm.com URLs to the equivalent developer.arm.com
ones (the old URLs should redirect, but we might as well avoid the
redirection notice, and the new URLs are pleasantly shorter).

This commit covers the links to the MPS2 board TRM, the various
Application Notes, the IoTKit and SSE-200 documents.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-25-peter.maydell@linaro.org

docs/system/arm/mps2.rst: Document the new mps3-an524 board

Add brief documentation of the new mps3-an524 board.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-24-peter.maydell@linaro.org

hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524

The AN524 has a PL031 RTC, which we have a model of; provide it
rather than an unimplemented-device stub.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-23-peter.maydell@linaro.org

hw/arm/mps2-tz: Stub out USB controller for mps3-an524

The AN524 has a USB controller (an ISP1763); we don't have a model of
it but we should provide a stub "unimplemented-device" for it.  This
is slightly complicated because the USB controller shares a PPC port
with the ethernet controller.

Implement a make_* function which provides creates a container
MemoryRegion with both the ethernet controller and an
unimplemented-device stub for the USB controller.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-22-peter.maydell@linaro.org

esp: add support for unaligned accesses

When the MacOS toolbox ROM transfers data from a target device to an unaligned
memory address, the first/last byte of a 16-bit transfer needs to be handled
separately. This means that the first byte is preloaded into the FIFO before
the transfer, or the last byte remains in the FIFO after the transfer.

The result of this is that the PDMA routines must be updated so that the FIFO
is loaded/unloaded if the last 16-bit word is used (rather than the last byte)
and any remaining byte from a FIFO wraparound is handled correctly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-43-mark.cave-ayland@ilande.co.uk>

esp: implement non-DMA transfers in PDMA mode

The MacOS toolbox ROM uses non-DMA TI commands to handle the first/last byte
of an unaligned 16-bit transfer to memory.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-42-mark.cave-ayland@ilande.co.uk>

esp: add trivial implementation of the ESP_RFLAGS register

The bottom 5 bits contain the number of bytes remaining in the FIFO which is
trivial to implement with Fifo8 (the remaining bits are unimplemented and left
as 0 for now).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-41-mark.cave-ayland@ilande.co.uk>

esp: convert cmdbuf from array to Fifo8

Rename ESP_CMDBUF_SZ to ESP_CMDFIFO_SZ and cmdbuf_cdb_offset to cmdfifo_cdb_offset
to indicate that the command buffer type has changed from an array to a Fifo8.

This also enables us to remove the ESPState field cmdlen since the command length
is now simply the number of elements used in cmdfifo.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-40-mark.cave-ayland@ilande.co.uk>

esp: convert ti_buf from array to Fifo8

Rename TI_BUFSZ to ESP_FIFO_SZ since this constant is really describing the size
of the FIFO and is not directly related to the TI size.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-39-mark.cave-ayland@ilande.co.uk>

esp: transition to message out phase after SATN and stop command

The SCSI bus should remain in the message out phase after the SATN and stop
command rather than transitioning to the command phase. A new ESPState variable
cmdbuf_cdb_offset is added which stores the offset of the CDB from the start
of cmdbuf when accumulating extended message out phase data.

Currently any extended message out data is discarded in do_cmd() before the CDB
is processed in do_busid_cmd().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-38-mark.cave-ayland@ilande.co.uk>

esp: add maxlen parameter to get_cmd()

Some guests use a mixture of DMA and non-DMA transfers in combination with the
SATN and stop command to transfer message out phase and command phase bytes to
the target. Prepare for the next commit by adding a maxlen parameter to
get_cmd() to allow partial transfers.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-37-mark.cave-ayland@ilande.co.uk>

esp: raise interrupt after every non-DMA byte transferred to the FIFO

This matches the description in the datasheet and is required as support for
non-DMA transfers is added.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-36-mark.cave-ayland@ilande.co.uk>

esp: remove old deferred command completion mechanism

Commit ea84a44250 "scsi: esp: Defer command completion until previous interrupts
have been handled" provided a mechanism to delay the command completion interrupt
until ESP_RINTR is read after the command has completed.

With the previous fixes for latching the ESP_RINTR bits and deferring the setting
of the command completion interrupt for incoming data to the SCSI callback, this
workaround is no longer required and can be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-35-mark.cave-ayland@ilande.co.uk>

esp: defer command completion interrupt on incoming data transfers

The MacOS toolbox ROM issues a command to the ESP controller as part of its
"FAST" SCSI routines and then proceeds to read the incoming data soon after
receiving the command completion interrupt.

Unfortunately due to SCSI block transfers being asynchronous the incoming data
may not yet be present causing an underflow error. Resolve this by waiting for
the SCSI subsystem transfer_data callback before raising the command completion
interrupt.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-34-mark.cave-ayland@ilande.co.uk>

esp: latch individual bits in ESP_RINTR register

Currently the ESP_RINTR register is set to a specific value as required within
the ESP state machine. In order to implement the upcoming deferred interrupt
functionality it is necessary to set individual bits within ESP_RINTR so that
a deferred interrupt will not overwrite the value of any other interrupt bits.

This also requires fixing up a few locations where the ESP_RINTR and ESP_RSEQ
registers are set/reset unexpectedly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-33-mark.cave-ayland@ilande.co.uk>

esp: implement FIFO flush command

At this point it is now possible to properly implement the FIFO flush command
without causing guest errors.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-32-mark.cave-ayland@ilande.co.uk>

esp: add 4 byte PDMA read and write transfers

The MacOS toolbox ROM performs 4 byte reads/writes when transferring data to
and from the target. Since the SCSI bus is 16-bits wide, use the memory API
to split a 4 byte access into 2 x 2 byte accesses.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-31-mark.cave-ayland@ilande.co.uk>

esp: remove pdma_origin from ESPState

Now that all data is transferred via the FIFO (ti_buf) there is no need to track
the source buffer being used for the data transfer. This also eliminates the
need for a separate subsection for PDMA state migration.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-30-mark.cave-ayland@ilande.co.uk>

esp: use FIFO for PDMA transfers between initiator and device

PDMA as implemented on the Quadra 800 uses DREQ to load data into the FIFO
up to a maximum of 16 bytes at a time. The MacOS toolbox ROM requires this
because it mixes FIFO and PDMA transfers whilst checking the FIFO status
and counter registers to ensure success.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-29-mark.cave-ayland@ilande.co.uk>

esp: fix PDMA target selection

Currently the target selection for PDMA is done after the SCSI command has been
delivered which is not correct. Perform target selection as part of the initial
get_cmd() call when the command is submitted: if no target is present, don't
raise DRQ.

If the target is present then switch to the command phase since the MacOS toolbox
ROM checks for this before attempting to submit the SCSI command.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-28-mark.cave-ayland@ilande.co.uk>

esp: rename get_cmd_cb() to esp_select()

This better describes the purpose of the function.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-27-mark.cave-ayland@ilande.co.uk>

esp: remove CMD pdma_origin

The cmdbuf is really just a copy of FIFO data (including extra message phase
bytes) so its pdma_origin is effectively TI. Fortunately we already know when
we are receiving a SCSI command since do_cmd == 1 which enables us to
distinguish between the two cases in esp_pdma_read()/esp_pdma_write().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-26-mark.cave-ayland@ilande.co.uk>

esp: use in-built TC to determine PDMA transfer length

Real hardware simply counts down using the in-built TC to determine when the
the PDMA request is complete. Use the TC to determine the PDMA transfer length
which then enables us to remove the redundant pdma_len variable.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-25-mark.cave-ayland@ilande.co.uk>

esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA

This eliminates the last user of the PDMA-specific pdma_cur variable which can
now be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-24-mark.cave-ayland@ilande.co.uk>

esp: move PDMA length adjustments into esp_pdma_read()/esp_pdma_write()

Here the updates to async_len and ti_size are moved into the corresponding
esp_pdma_read()/esp_pdma_write() function to eliminate the reference to
pdma_cur in do_dma_pdma_cb().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-23-mark.cave-ayland@ilande.co.uk>

esp: remove redundant pdma_start from ESPState

Now that PDMA SCSI commands are accumulated in cmdbuf in the same way as normal
commands, the existing logic for locating the start of the SCSI command in
cmdbuf via cmdlen can be used. This enables the PDMA-specific pdma_start and
also get_pdma_buf() to be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-22-mark.cave-ayland@ilande.co.uk>

esp: remove the buf and buflen parameters from get_cmd()

Now that all SCSI commands are accumulated in cmdbuf, remove the buf and buflen
parameters from get_cmd() since these always reference cmdbuf and ESP_CMDBUF_SZ
respectively.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-21-mark.cave-ayland@ilande.co.uk>

esp: remove buf parameter from do_cmd()

Now that all SCSI commands are accumulated in cmdbuf, remove the buf parameter
from do_cmd() since this always points to cmdbuf.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-20-mark.cave-ayland@ilande.co.uk>

esp: accumulate SCSI commands for PDMA transfers in cmdbuf instead of pdma_buf

ESP SCSI commands are already accumulated in cmdbuf and so there is no need to
keep a separate pdma_buf buffer. Accumulate SCSI commands for PDMA transfers in
cmdbuf instead of pdma_buf so update cmdlen accordingly and change pdma_origin
for PDMA transfers to CMD which allows the PDMA origin to be removed.

This commit also removes a stray memcpy() from get_cmd() which is a no-op because
cmdlen is always zero at the start of a command.

Notionally the removal of pdma_buf from vmstate_esp_pdma also breaks migration
compatibility for the PDMA subsection until its complete removal by the end of
the series.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-19-mark.cave-ayland@ilande.co.uk>

esp: move pdma_len and TC logic into esp_pdma_read()/esp_pdma_write()

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-18-mark.cave-ayland@ilande.co.uk>

esp: use pdma_origin directly in esp_pdma_read()/esp_pdma_write()

This is the first step in removing get_pdma_buf() from esp.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-17-mark.cave-ayland@ilande.co.uk>

esp: introduce esp_pdma_read() and esp_pdma_write() functions

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-16-mark.cave-ayland@ilande.co.uk>

esp: remove minlen restriction in handle_ti

The limiting of DMA transfers to the maximum size of the available data is already
handled by esp_do_dma() and do_dma_pdma_cb().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-15-mark.cave-ayland@ilande.co.uk>

esp: remove dma_left from ESPState

The ESP device already keeps track of the remaining bytes left to transfer via
its TC (transfer counter) register which is decremented for each byte that
is transferred across the SCSI bus.

Switch the transfer logic to use the value of TC instead of dma_left and then
remove dma_left completely, adding logic to the vmstate_esp post_load() function
to transfer the old dma_left value to the TC register during migration from
older versions.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-14-mark.cave-ayland@ilande.co.uk>

esp: remove dma_counter from ESPState

The value of dma_counter is set once at the start of the transfer and remains
the same until the transfer is complete. This allows the check in esp_transfer_data
to be simplified since dma_left will always be non-zero until the transfer is
completed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-13-mark.cave-ayland@ilande.co.uk>

esp: apply transfer length adjustment when STC is zero at TC load time

Perform the length adjustment whereby a value of 0 in the STC represents
a transfer length of 0x10000 at the point where the TC is loaded at the
start of a DMA command rather than just when a TI (Transfer Information)
command is executed. This better matches the description as given in the
datasheet.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-12-mark.cave-ayland@ilande.co.uk>

esp: introduce esp_get_stc()

This function simplifies reading the STC register value without having to manually
shift each individual 8-bit value.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-11-mark.cave-ayland@ilande.co.uk>

esp: introduce esp_get_tc() and esp_set_tc()

These functions simplify reading and writing the TC register value without having to
manually shift each individual 8-bit value.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-10-mark.cave-ayland@ilande.co.uk>

esp: determine transfer direction directly from SCSI phase

The transfer direction is currently determined by checking the sign of ti_size
but as this series progresses ti_size can be zero at the end of the transfer.

Use the SCSI phase to determine the transfer direction as used in other SCSI
controller implementations.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-9-mark.cave-ayland@ilande.co.uk>

esp: add PDMA trace events

This will become more useful later when trying to debug mixed FIFO and PDMA
requests.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-8-mark.cave-ayland@ilande.co.uk>

esp: fix esp_reg_read() trace event

Move the trace event to the end of the function so that it correctly reports
the returned value if it doesn't come directly from the rregs array.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-7-mark.cave-ayland@ilande.co.uk>

esp: add trace event when receiving a TI command

This enables us to determine whether the command being issued is for a DMA or a
non-DMA transfer.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-6-mark.cave-ayland@ilande.co.uk>

esp: add vmstate_esp version to embedded ESPState

The QOM object representing ESPState is currently embedded within both the
SYSBUS_ESP and PCI_ESP devices with migration state handled by embedding
vmstate_esp within each device using VMSTATE_STRUCT.

Since the vmstate_esp fields are embedded directly within the migration
stream, the incoming vmstate_esp version_id is lost. The only version information
available is that from vmstate_sysbus_esp_scsi and vmstate_esp_pci_scsi, but
those versions represent their respective devices and not that of the underlying
ESPState.

Resolve this by adding a new version-dependent field in vmstate_sysbus_esp_scsi
and vmstate_esp_pci_scsi which stores the vmstate_esp version_id field within
ESPState to be used to allow migration from older QEMU versions.

Finally bump the vmstate_esp version to 5 to cover the upcoming ESPState changes
within this patch series.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-5-mark.cave-ayland@ilande.co.uk>

esp: QOMify the internal ESP device state

Make this new QOM device state a child device of both the sysbus-esp and esp-pci
implementations.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-4-mark.cave-ayland@ilande.co.uk>

esp: rename existing ESP QOM type to SYSBUS_ESP

The existing ESP QOM type currently represents a sysbus device with an embedded
ESP state. Rename the type to SYSBUS_ESP accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-3-mark.cave-ayland@ilande.co.uk>

esp: checkpatch fixes

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-2-mark.cave-ayland@ilande.co.uk>

target/hexagon/opcodes: Add missing varargs cleanup

Fix a trivial incorrect usage of variable argument macros detected
by Coverity (missing_va_end: va_end was not called for ap).

Fixes: Coverity CID 1446720 (VARARGS)
Fixes: e3c00c2ed75 ("Hexagon (target/hexagon) opcode data structures")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20210223111253.2831285-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hexagon: Fix shift amount check in fASHIFTL/fLSHIFTR

Fixes: a646e99cb90 ("Hexagon (target/hexagon) macros")
Eliminate the following Coverity CIDs (Bad bit shift operation)
    325227
    325292
    325425
    325526
    325561
    325564
    325578
    325637
    325736
    325748
    325786
    325815
    325837

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1614879425-9259-1-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

exec: Poison Hexagon target-specific definitions

Commit 3e7a84eeccc ("Hexagon build infrastructure") added Hexagon
definitions that should be poisoned on target independent device
code, but forgot to update "exec/poison.h". Do it now.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20210219135754.1968100-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Precompute curr_cflags into cpu->tcg_cflags

The primary motivation is to remove a dozen insns along
the fast-path in tb_lookup.  As a byproduct, this allows
us to completely remove parallel_cpus.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: lightly re-arrange TranslationBlock

Lets make sure all the flags we compare when looking up blocks are
together in the same place.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210224165811.11567-5-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: drop the use of CF_HASH_MASK and rename params

We don't really deal in cf_mask most of the time. The one time it's
relevant is when we want to remove an invalidated TB from the QHT
lookup. Everywhere else we should be looking up things without
CF_INVALID set.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210224165811.11567-4-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: move CF_CLUSTER calculation to curr_cflags

There is nothing special about this compile flag that doesn't mean we
can't just compute it with curr_cflags() which we should be using when
building a new set.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210224165811.11567-3-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: rename tb_lookup__cpu_state and hoist state extraction

Having a function return either and valid TB and some system state
seems excessive. It will make the subsequent re-factoring easier if we
lookup the current state where we are.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210224165811.11567-2-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge mov, not and neg operations

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge bswap operations

This includes bswap16 and bswap32.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge extension operations

This includes ext8s, ext8u, ext16s, ext16u.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge basic arithmetic operations

This includes add, sub, mul, and, or, xor.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Reduce use of tci_read_r64

In all cases restricted to 64-bit hosts, tcg_read_r is
identical.  We retain the 64-bit symbol for the single
case of INDEX_op_qemu_st_i64.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Remove tci_read_r32s

Use explicit casts for ext32s opcodes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Remove tci_read_r32

Use explicit casts for ext32u opcodes, and allow truncation
to happen for other users.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Remove tci_read_r16s

Use explicit casts for ext16s opcodes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Remove tci_read_r16

Use explicit casts for ext16u opcodes, and allow truncation
to happen with the store for st16 opcodes, and with the call
for bswap16 opcodes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Remove tci_read_r8s

Use explicit casts for ext8s opcodes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Remove tci_read_r8

Use explicit casts for ext8u opcodes, and allow truncation
to happen with the store for st8 opcodes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge identical cases in generation (load/store opcodes)

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 5/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge identical cases in generation (conditional opcodes)

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 4/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge identical cases in generation (deposit opcode)

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 3/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge identical cases in generation (exchange opcodes)

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 2/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Merge identical cases in generation (arithmetic opcodes)

Use CASE_32_64 and CASE_64 to reduce ifdefs and merge
cases that are identical between 32-bit and 64-bit hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210217202036.1724901-5-richard.henderson@linaro.org>
[PMD: Split patch as 1/5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210218232840.1760806-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Manage splitwx in tc_ptr_to_region_tree by hand

The use in tcg_tb_lookup is given a random pc that comes from the pc
of a signal handler.  Do not assert that the pointer is already within
the code gen buffer at all, much less the writable mirror of it.

Fixes: db0c51a3803
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_raise_tb_overflow

Allow other places in tcg to restart with a smaller tb.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Use exec/cpu_ldst.h interfaces

Use the provided cpu_ldst.h interfaces.  This fixes the build vs
the unconverted uses of g2h(), adds missed memory trace events,
and correctly recognizes when a SIGSEGV belongs to the guest via
set_helper_retaddr().

Fixes: 3e8f1628e864
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Fix generation of "scalar" vector operations

For some vector operations, "1D" is not a valid type, and there
are separate instructions for the 64-bit scalar operation.

Tested-by: Stefan Weil <sw@weilnetz.de>
Buglink: https://bugs.launchpad.net/qemu/+bug/1916112
Fixes: 14e4c1e2355 ("tcg/aarch64: Add vector operations")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Fix I3617_CMLE0

Fix a typo in the encodeing of the cmle (zero) instruction.

Fixes: 14e4c1e2355 ("tcg/aarch64: Add vector operations")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Fix constant subtraction in tcg_out_addsub2

An hppa guest executing

0x000000000000e05c:  ldil L%10000,r4
0x000000000000e060:  ldo 0(r4),r4
0x000000000000e064:  sub r3,r4,sp

produces

 ---- 000000000000e064 000000000000e068
 sub2_i32 tmp0,tmp4,r3,$0x1,$0x10000,$0x0

after folding and constant propagation.  Then we hit

tcg-target.c.inc:640: tcg_out_insn_3401: Assertion `aimm <= 0xfff' failed.

because aimm is in fact -16, but unsigned.

The ((bl < 0) ^ sub) condition which negates bl is incorrect and will
always lead to this abort.  If the constant is positive, sub will make
it negative; if the constant is negative, sub will keep it negative.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/sh4/sh7750_regs: Replace link to license by its full content

This file is borrowed from the RTEMS source code, which comes
with a GPL-2.0-or-later license with a header exception.

Expand the GPL-2.0-or-later license in place to not be dependent
on a 3rd party website. This also fix the misleading comment "The
license and distribution terms for this file may be found in the
file LICENSE in this distribution" referring to the RTEMS distribution
and not to the QEMU one.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210222185605.2714192-1-f4bug@amsat.org>