git.maquefel.me Git - linux.git/log

scsi: qla2xxx: Fix exchange oversubscription

[ Upstream commit 41e5afe51f75f2858f5563145348f6c26d307b8f ]

In large environment, it is possible to experience command timeout and
escalation of path recovery. Currently the driver does not track the number
of exchanges/commands sent to FW. If there is a delay for commands at the
head of the queue, then this will create back pressure for commands at the
back of the queue.

Check for exchange availability before command submission.

Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix I/O timeout due to over-subscription

[ Upstream commit 63ab6cb582fad3757a03f466db671729b97f2df8 ]

The current edif code does not keep track of FW IOCB resources. This led
to IOCB queue full on error recovery (I/O timeout). Make use of the
existing code that tracks IOCB resources to prevent over-subscription.

Link: https://lore.kernel.org/r/20220608115849.16693-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 41e5afe51f75 ("scsi: qla2xxx: Fix exchange oversubscription")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: clean event_thread->worker in case of an error

[ Upstream commit c79bb6b92defdcb834ceeeed9c1cf591beb1b71a ]

If worker creation fails, nullify the event_thread->worker, so that
msm_drm_uninit() doesn't try accessing invalid memory location. While we
are at it, remove duplicate assignment to the ret variable.

Fixes: 1041dee2178f ("drm/msm: use kthread_create_worker instead of kthread_run")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490106/
Link: https://lore.kernel.org/r/20220617233328.1143665-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Correct interlaced timings again

[ Upstream commit 771d6539f27bd55f43d8a95d53a7eeaaffa2681c ]

The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.

Fixes: fb10dc451c0f ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5

[ Upstream commit 902973dc1a049c0d7bf0c222b8f2b3876f01b4a2 ]

Same as the xRGB8888 formats, HVS5 has managed to swap the colour
channels for the xRGB1555 formats as well. Add the relevant
config for pixel_order_hvs5.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-6-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Set AXI panic modes

[ Upstream commit df993fced230daa8452892406f3180c93ebf7e7b ]

The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.

With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups

[ Upstream commit c818ae563bf99457f02e8170aabd6b174f629f65 ]

of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d3e5116119bd ("pinctrl: add pinctrl driver for Rockchip SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain

[ Upstream commit dcef18c8ac40aa85bb339f64c1dd31dd458b06fb ]

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d86f4d71e42a ("pinctrl: stm32: check irq controller availability at probe")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102082503.3944927-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins

[ Upstream commit a7cc0e2685082a0d79baec02df184dfa83cbfac3 ]

Adjust names of function for wcss pins, also fix third gpio in bt group.

Fixes: bcd11493f0ab ("pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20221231164250.74550-1-a39.skl@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: Add missing check for alloc_ordered_workqueue

[ Upstream commit afe4cb96153a0d8003e4e4ebd91b5c543e10df84 ]

Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and
`hdmi_hpd.c`.

Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517211/
Link: https://lore.kernel.org/r/20230106023011.3985-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ftsteutates) Fix scaling of measurements

[ Upstream commit ca8fd8c16a8b77dfcf7f6ce52d2c863220693a78 ]

A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V

The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).

The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.

The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.

Tested on a Fujitsu DS3401-B1.

Fixes: 08426eda58e0 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()

[ Upstream commit 9afdf98cfdfa2ba8ec068cf08c5fcdc1ed8daf3f ]

In ipu_add_client_devices(), we need to call of_node_put() for
reference returned by of_graph_get_port_by_id() in fail path.

Fixes: 17e052175039 ("gpu: ipu-v3: Do not bail out on missing optional port nodes")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220720152227.1288413-1-windhl@126.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720152227.1288413-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: tidss: Fix pixel format definition

[ Upstream commit 2df0433b18f2735a49d2c3a968b40fa2881137c0 ]

There was a long-standing bug from a typo that created 2 ARGB1555 and
ABGR1555 pixel format entries. Weston 10 has a sanity check that alerted
me to this issue.

According to the Supported Pixel Data formats table we have the later
entries should have been for Alpha-X instead.

Signed-off-by: Randolph Sapp <rs@ti.com>
Fixes: 32a1795f57eecc ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202001803.1765805-1-rs@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: dpi: Fix format mapping for RGB565

[ Upstream commit 0870d86eac8a9abd89a0be1b719d5dc5bac936f0 ]

The mapping is incorrect for RGB565_1X16 as it should be
DPI_FORMAT_18BIT_666_RGB_1 instead of DPI_FORMAT_18BIT_666_RGB_3.

Fixes: 08302c35b59d ("drm/vc4: Add DPI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-7-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: dpi: Add option for inverting pixel clock and output enable

[ Upstream commit 3c2707632146b22e97b0fbf6778bab8add2eaa1d ]

DRM provides flags for inverting pixel clock and output enable
signals, but these were not mapped to the relevant registers.

Add those mappings.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-10-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Stable-dep-of: 0870d86eac8a ("drm/vc4: dpi: Fix format mapping for RGB565")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vkms: Fix null-ptr-deref in vkms_release()

[ Upstream commit 2fe2a8f40c21161ffe7653cc234e7934db5b7cc5 ]

A null-ptr-deref is triggered when it tries to destroy the workqueue in
vkms->output.composer_workq in vkms_release().

KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24
RIP: 0010:destroy_workqueue+0x2f/0x710
...
Call Trace:
  <TASK>
  ? vkms_config_debugfs_init+0x50/0x50 [vkms]
  __devm_drm_dev_alloc+0x15a/0x1c0 [drm]
  vkms_init+0x245/0x1000 [vkms]
  do_one_initcall+0xd0/0x4f0
  do_init_module+0x1a4/0x680
  load_module+0x6249/0x7110
  __do_sys_finit_module+0x140/0x200
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

The reason is that an OOM happened which triggers the destroy of the
workqueue, however, the workqueue is alloced in the later process,
thus a null-ptr-deref happened. A simple call graph is shown as below:

vkms_init()
  vkms_create()
    devm_drm_dev_alloc()
      __devm_drm_dev_alloc()
        devm_drm_dev_init()
          devm_add_action_or_reset()
            devm_add_action() # an error happened
            devm_drm_dev_init_release()
              drm_dev_put()
                kref_put()
                  drm_dev_release()
                    vkms_release()
                      destroy_workqueue() # null-ptr-deref happened
    vkms_modeset_init()
      vkms_output_init()
        vkms_crtc_init() # where the workqueue get allocated

Fix this by checking if composer_workq is NULL before passing it to
the destroy_workqueue() in vkms_release().

Fixes: 6c234fe37c57 ("drm/vkms: Implement CRC debugfs API")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-3-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vkms: Fix memory leak in vkms_init()

[ Upstream commit 0d0b368b9d104b437e1f4850ae94bdb9a3601e89 ]

A memory leak was reported after the vkms module install failed.

unreferenced object 0xffff88810bc28520 (size 16):
  comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s)
  hex dump (first 16 bytes):
    01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff  ...d............
  backtrace:
    [<00000000e7561ff8>] kmalloc_trace+0x27/0x60
    [<000000000b1954a0>] 0xffffffffc45200a9
    [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0
    [<000000001505ee87>] do_init_module+0x1a4/0x680
    [<00000000958079ad>] load_module+0x6249/0x7110
    [<00000000117e4696>] __do_sys_finit_module+0x140/0x200
    [<00000000f74b12d2>] do_syscall_64+0x35/0x80
    [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

The reason is that the vkms_init() returns without checking the return
value of vkms_create(), and if the vkms_create() failed, the config
allocated at the beginning of vkms_init() is leaked.

vkms_init()
   config = kmalloc(...) # config allocated
   ...
   return vkms_create() # vkms_create failed and config is leaked

Fix this problem by checking return value of vkms_create() and free the
config if error happened.

Fixes: 2df7af93fdad ("drm/vkms: Add vkms_config type")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-2-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: megachips: Fix error handling in i2c_register_driver()

[ Upstream commit 4ecff954c370b82bce45bdca2846c5c5563e8a8a ]

A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is
triggered with the following log given:

[ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting...
insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy

The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver()
directly without checking its return value, if i2c_add_driver() failed,
it returns without calling i2c_del_driver() on the previous i2c driver,
resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed
later.
A simple call graph is shown as below:

stdpxxxx_ge_b850v3_init()
   i2c_add_driver(&stdp4028_ge_b850v3_fw_driver)
   i2c_add_driver(&stdp2690_ge_b850v3_fw_driver)
     i2c_register_driver()
       driver_register()
         bus_add_driver()
           priv = kzalloc(...) # OOM happened
   # return without delete stdp4028_ge_b850v3_fw_driver

Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when
i2c_add_driver() returns error.

Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC

[ Upstream commit 7783cc67862f9166c901bfa0f80b717aa8d354dd ]

Freescale/NXP i.MX LCDIF and eLCDIF LCD controllers are only present on
Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXS ||
ARCH_MXC, to prevent asking the user about this driver when configuring
a kernel without Freescale/NXP i.MX support.

Fixes: 45d59d704080cc0c ("drm: Add new driver for MXSFB controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/98e74779ca2bc575d91afff03369e86b080c01ac.1669046358.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec

[ Upstream commit 4b03d5e0d3e86ee492d54254927d020dc0fe8acf ]

The datasheet specifies a delay of 10 milliseconds, but the current
driver only waits for 1 ms. Fix this to make sure the initialization
sequence meets the spec.

Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122081219.20143-1-frieder@fris.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats

[ Upstream commit 6fb6c979ca628583d4d0c59a0f8ff977e581ecc0 ]

As of commit eae06120f1974e1a ("drm: refuse ADDFB2 ioctl for broken
bigendian drivers"), drivers must set the
quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb()
compat code work correctly on big-endian machines.

While that works fine for big-endian XRGB8888 and ARGB8888, which are
mapped to the existing little-endian BGRX8888 and BGRA8888 formats, it
does not work for big-endian XRGB1555 and RGB565, as the latter are not
listed in the format database.

Fix this by adding the missing formats. Limit this to big-endian
platforms, as there is currently no need to support these formats on
little-endian platforms.

Fixes: 6960e6da9cec3f66 ("drm: fix drm_mode_addfb() on big endian machines.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3ee1f8144feb96c28742b22384189f1f83bcfc1a.1669221671.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Fix potential null-ptr-deref due to drmm_mode_config_init()

[ Upstream commit 834c23e4f798dcdc8af251b3c428ceef94741991 ]

drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.

Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839

Fixes: 6b4959f43a04 ("drm/atomic: atomic plane properties")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118021651.2460-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sefltests: netdevsim: wait for devlink instance after netns removal

[ Upstream commit f922c7b1c1c45740d329bf248936fdb78c0cff6e ]

When devlink instance is put into network namespace and that network
namespace gets deleted, devlink instance is moved back into init_ns.
This is done as a part of cleanup_net() routine. Since cleanup_net()
is called asynchronously from workqueue, there is no guarantee that
the devlink instance move is done after "ip netns del" returns.

So fix this race by making sure that the devlink instance is present
before any other operation.

Reported-by: Amir Tzin <amirtz@nvidia.com>
Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230220132336.198597-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftest: fib_tests: Always cleanup before exit

[ Upstream commit b60417a9f2b890a8094477b2204d4f73c535725e ]

Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.

A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.

Fixes: 1056691b2680 ("selftests: fib_tests: Make test results more verbose")
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: fix MoCA LED control

[ Upstream commit a7515af9fb8f0890fe540b108def4a86b9e8330a ]

When the bcmgenet_mii_config() code was refactored it was missed
that the LED control for the MoCA interface got overwritten by
the port_ctrl value. Its previous programming is restored here.

Fixes: 4f8d81b77e66 ("net: bcmgenet: Refactor register access in bcmgenet_mii_config")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()

[ Upstream commit 9ca5e7ecab064f1f47da07f7c1ddf40e4bc0e5ac ]

When a file descriptor of pppol2tp socket is passed as file descriptor
of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register().
This situation is reproduced by the following program:

int main(void)
{
int sock;
struct sockaddr_pppol2tp addr;

sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
if (sock < 0) {
perror("socket");
return 1;
}

addr.sa_family = AF_PPPOX;
addr.sa_protocol = PX_PROTO_OL2TP;
addr.pppol2tp.pid = 0;
addr.pppol2tp.fd = sock;
addr.pppol2tp.addr.sin_family = PF_INET;
addr.pppol2tp.addr.sin_port = htons(0);
addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1");
addr.pppol2tp.s_tunnel = 1;
addr.pppol2tp.s_session = 0;
addr.pppol2tp.d_tunnel = 0;
addr.pppol2tp.d_session = 0;

if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("connect");
return 1;
}

return 0;
}

This program causes the following lockdep warning:

============================================
WARNING: possible recursive locking detected
6.2.0-rc5-00205-gc96618275234 #56 Not tainted
--------------------------------------------
repro/8607 is trying to acquire lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0

but task is already holding lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30

other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(sk_lock-AF_PPPOX);
   lock(sk_lock-AF_PPPOX);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

1 lock held by repro/8607:
  #0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30

stack backtrace:
CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
  <TASK>
  dump_stack_lvl+0x100/0x178
  __lock_acquire.cold+0x119/0x3b9
  ? lockdep_hardirqs_on_prepare+0x410/0x410
  lock_acquire+0x1e0/0x610
  ? l2tp_tunnel_register+0x2b7/0x11c0
  ? lock_downgrade+0x710/0x710
  ? __fget_files+0x283/0x3e0
  lock_sock_nested+0x3a/0xf0
  ? l2tp_tunnel_register+0x2b7/0x11c0
  l2tp_tunnel_register+0x2b7/0x11c0
  ? sprintf+0xc4/0x100
  ? l2tp_tunnel_del_work+0x6b0/0x6b0
  ? debug_object_deactivate+0x320/0x320
  ? lockdep_init_map_type+0x16d/0x7a0
  ? lockdep_init_map_type+0x16d/0x7a0
  ? l2tp_tunnel_create+0x2bf/0x4b0
  ? l2tp_tunnel_create+0x3c6/0x4b0
  pppol2tp_connect+0x14e1/0x1a30
  ? pppol2tp_put_sk+0xd0/0xd0
  ? aa_sk_perm+0x2b7/0xa80
  ? aa_af_perm+0x260/0x260
  ? bpf_lsm_socket_connect+0x9/0x10
  ? pppol2tp_put_sk+0xd0/0xd0
  __sys_connect_file+0x14f/0x190
  __sys_connect+0x133/0x160
  ? __sys_connect_file+0x190/0x190
  ? lockdep_hardirqs_on+0x7d/0x100
  ? ktime_get_coarse_real_ts64+0x1b7/0x200
  ? ktime_get_coarse_real_ts64+0x147/0x200
  ? __audit_syscall_entry+0x396/0x500
  __x64_sys_connect+0x72/0xb0
  do_syscall_64+0x38/0xb0
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

This patch fixes the issue by getting/creating the tunnel before
locking the pppol2tp socket.

Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: Interpret UDP_GRO cmsg data as an int value

[ Upstream commit 436864095a95fcc611c20c44a111985fa9848730 ]

Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an
int (see udp_cmsg_recv), not a u16 value, as strace confirms:

  recvmsg(8, {msg_name=...,
              msg_iov=[{iov_base="\0\0..."..., iov_len=96000}],
              msg_iovlen=1,
              msg_control=[{cmsg_len=20,         <-- sizeof(cmsghdr) + 4
                            cmsg_level=SOL_UDP,
                            cmsg_type=0x68}],    <-- UDP_GRO
                            msg_controllen=24,
                            msg_flags=0}, 0) = 11200

Interpreting the data as an u16 value won't work on big-endian platforms.
Since it is too late to back out of this API decision [1], fix the test.

[1]: https://lore.kernel.org/netdev/20230131174601.203127-1-jakub@cloudflare.com/

Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts

[ Upstream commit 13a157b38ca5b4f9eed81442b8821db293755961 ]

When support for the interrupt controller was added with a5042de2688d,
we forgot to update the flags to be set to contain IRQ_LEVEL. While the
flow handler is correct, the output from /proc/interrupts does not show
such interrupts as being level triggered when they are, correct that.

Fixes: a5042de2688d ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-3-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts

[ Upstream commit 94debe03e8afa1267f95a9001786a6aa506b9ff3 ]

When support for the level triggered interrupt controller flavor was
added with c0ca7262088e, we forgot to update the flags to be set to
contain IRQ_LEVEL. While the flow handler is correct, the output from
/proc/interrupts does not show such interrupts as being level triggered
when they are, correct that.

Fixes: c0ca7262088e ("irqchip/brcmstb-l2: Add support for the BCM7271 L2 controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-2-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix global subprog context argument resolution logic

[ Upstream commit d384dce281ed1b504fae2e279507827638d56fa3 ]

KPROBE program's user-facing context type is defined as typedef
bpf_user_pt_regs_t. This leads to a problem when trying to passing
kprobe/uprobe/usdt context argument into global subprog, as kernel
always strip away mods and typedefs of user-supplied type, but takes
expected type from bpf_ctx_convert as is, which causes mismatch.

Current way to work around this is to define a fake struct with the same
name as expected typedef:

struct bpf_user_pt_regs_t {};

__noinline my_global_subprog(struct bpf_user_pt_regs_t *ctx) { ... }

This patch fixes the issue by resolving expected type, if it's not
a struct. It still leaves the above work-around working for backwards
compatibility.

Fixes: 91cc1a99740e ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230216045954.3002473-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error

[ Upstream commit 118469f88180438ef43dee93d71f77c00e7b425d ]

Move the supply for cf->data[3] (bit stream position of CAN error), in
case of a bus- or protocol-error, outside of the "switch (ecc &
SJA1000_ECC_MASK){}"-statement, because this bit stream position is
independent of the error type.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/hisi: Drop second sensor hi3660

[ Upstream commit 15cc25829a97c3957e520e971868aacc84341317 ]

The commit 74c8e6bffbe1 ("driver core: Add __alloc_size hint to devm
allocators") exposes a panic "BRK handler: Fatal exception" on the
hi3660_thermal_probe funciton.
This is because the function allocates memory for only one
sensors array entry, but tries to fill up a second one.

Fix this by removing the unneeded second access.

Fixes: 7d3a2a2bbadb ("thermal/drivers/hisi: Fix number of sensors on hi3660")
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
Link: https://lore.kernel.org/linux-mm/20221101223321.1326815-5-keescook@chromium.org/
Link: https://lore.kernel.org/r/20230210141507.71014-1-yongqin.liu@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: make rate u32 in sta_set_rate_info_rx()

[ Upstream commit 59336e07b287d91dc4ec265e07724e8f7e3d0209 ]

The value of last_rate in ieee80211_sta_rx_stats is degraded from u32 to
u16 after being assigned to rate variable, which causes information loss
in STA_STATS_FIELD_TYPE and later bitfields.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230209110659.25447-1-shayne.chen@mediatek.com
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: crypto4xx - Call dma_unmap_page when done

[ Upstream commit bcdda4301bdc4955d45f7e1ffefb6207967b067e ]

In crypto4xx_cipher_done, we should be unmapping the dst page, not
mapping it.

This was flagged by a sparse warning about the unused addr variable.
While we're at it, also fix a sparse warning regarding the unused
ctx variable in crypto4xx_ahash_done (by actually using it).

Fixes: 049359d65527 ("crypto: amcc - Add crypt4xx driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: resource: Do IRQ override on all TongFang GMxRGxx

[ Upstream commit 17bb7046e7ce038a73ee97eaa804e0300c5199e2 ]

Apply commit 7592b79ba4a9 ("ACPI: resource: do IRQ override on XMG Core 15")
override for all vendors using this mainboard.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models

[ Upstream commit cb18703c179713056bd7e3bdfc2260ab4e8658f0 ]

Fix a regression introduced by commit 9946e39fe8d0 ("ACPI: resource: skip
IRQ override on AMD Zen platforms") on MAINGEAR Vector Pro 2 systems, which
causes the built-in keyboard to not work. This restores the functionality
by adding an IRQ override.

No other IRQs were being overridden before, so this should be all that is
needed for these systems. I have personally tested this on the 15" model
(MG-VCP2-15A3070T), and I have confirmation that the issue is present on
the 17" model (MG-VCP2-17A3070T).

Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Signed-off-by: Adam Niederer <adam.niederer@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix out-of-srctree build

[ Upstream commit 0b0757244754ea1d0721195c824770f5576e119e ]

Building BPF selftests out of srctree fails with:

make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'. Stop.

The culprit is the rule that defines convenient shorthands like
"make test_progs", which builds $(OUTPUT)/test_progs. These shorthands
make sense only for binaries that are built though; scripts that live
in the source tree do not end up in $(OUTPUT).

Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule.

The issue exists for a while, but it became a problem only after commit
d68ae4982cb7 ("selftests/bpf: Install all required files to run selftests"),
which added dependencies on these scripts.

Fixes: 03dcb78460c2 ("selftests/bpf: Add simple per-test targets to Makefile")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()

[ Upstream commit 3cfb7df24cee0f5fdc4cc5d3176cab9aadfcb430 ]

This code re-uses "i" to be the iterator for both the inside and outside
loops. It means the outside loop will exit earlier than intended.

Fixes: d219b7eb3792 ("mwifiex: handle BT coex event to adjust Rx BA window size")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Y+ERnaDaZD7RtLvX@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwl4965: Add missing check for create_singlethread_workqueue()

[ Upstream commit 26e6775f75517ad6844fe5b79bc5f3fa8c22ee61 ]

Add the check for the return value of the create_singlethread_workqueue()
in order to avoid NULL pointer dereference.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230209010748.45454-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwl3945: Add missing check for create_singlethread_workqueue

[ Upstream commit 1fdeb8b9f29dfd64805bb49475ac7566a3cb06cb ]

Add the check for the return value of the create_singlethread_workqueue
in order to avoid NULL pointer dereference.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230208063032.42763-2-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: time: initialize hrtimer based broadcast clock event device

[ Upstream commit 8b3b8fbb4896984b5564789a42240e4b3caddb61 ]

Similarly to commit 022eb8ae8b5e ("ARM: 8938/1: kernel: initialize
broadcast hrtimer based clock event device"), RISC-V needs to initiate
hrtimer based broadcast clock event device before C3STOP can be used.
Otherwise, the introduction of C3STOP for the RISC-V arch timer in
commit 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped
during CPU suspend") leaves us without any broadcast timer registered.
This prevents the kernel from entering oneshot mode, which breaks timer
behaviour, for example clock_nanosleep().

A test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250
& C3STOP enabled, the sleep times are rounded up to the next jiffy:
== CPU: 1 ==      == CPU: 2 ==      == CPU: 3 ==      == CPU: 4 ==
Mean: 7.974992    Mean: 7.976534    Mean: 7.962591    Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000      Hi: 10.495000     Hi: 8.864000      Hi: 4.736000
Lo: 6.087000      Lo: 6.380000      Lo: 4.872000      Lo: 3.403000
Samples: 521      Samples: 521      Samples: 521      Samples: 521

Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Suggested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-2-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: /proc/hardware should depend on PROC_FS

[ Upstream commit 1e5b5df65af99013b4d31607ddb3ca5731dbe44d ]

When CONFIG_PROC_FS is not set, there is a build error for an unused
function. Make PROC_HARDWARE depend on PROC_FS to prevent this error.

In file included from ../arch/m68k/kernel/setup.c:3:
../arch/m68k/kernel/setup_mm.c:477:12: error: 'hardware_proc_show' defined but not used [-Werror=unused-function]
477 | static int hardware_proc_show(struct seq_file *m, void *v)
| ^~~~~~~~~~~~~~~~~~

Fixes: 66d857b08b8c ("m68k: merge m68k and m68knommu arch directories") # v3.0
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230209010825.24136-1-rdunlap@infradead.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rsa-pkcs1pad - Use akcipher_request_complete

[ Upstream commit 564cabc0ca0bdfa8f0fc1ae74b24d0a7554522c5 ]

Use the akcipher_request_complete helper instead of calling the
completion function directly. In fact the previous code was buggy
in that EINPROGRESS was never passed back to the original caller.

Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rds: rds_rm_zerocopy_callback() correct order for list_add_tail()

[ Upstream commit 68762148d1b011d47bc2ceed7321739b5aea1e63 ]

rds_rm_zerocopy_callback() uses list_add_tail() with swapped
arguments. This links the list head with the new entry, losing
the references to the remaining part of the list.

Fixes: 9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix alen calculation in libbpf_nla_dump_errormsg()

[ Upstream commit 17bcd27a08a21397698edf143084d7c87ce17946 ]

The code assumes that everything that comes after nlmsgerr are nlattrs.
When calculating their size, it does not account for the initial
nlmsghdr. This may lead to accessing uninitialized memory.

Fixes: bbf48c18ee0c ("libbpf: add error reporting in XDP")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-8-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/ap: fix status returned by ap_qact()

[ Upstream commit a2522c80f074c35254974fec39fffe8b8d75befe ]

Since commit 159491f3b509 ("s390/ap: rework assembler functions to use
unions for in/out register variables") the function ap_qact() tries to
grab the status from the wrong part of the register. Thus we always end
up with zeros. Which is wrong, among others, because we detect failures
via status.response_code.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Harald Freudenberger <freude@linux.ibm.com>
Fixes: 159491f3b509 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/ap: fix status returned by ap_aqic()

[ Upstream commit 394740d7645ea767795074287769dd26dbd4d782 ]

There function ap_aqic() tries to grab the status from the
wrong part of the register. Thus we always end up with
zeros. Which is wrong, among others, because we detect
failures via status.response_code.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: 159491f3b509 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: get wakeup status from serdev device handle

[ Upstream commit 03b0093f7b310493bc944a20f725228cfe0d3fea ]

Bluetooth controller attached via the UART is handled by the serdev driver.
Get the wakeup status from the device handle through serdev, instead of the
parent path.

Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: Fix potential user-after-free

[ Upstream commit df5703348813235874d851934e957c3723d71644 ]

This fixes all instances of which requires to allocate a buffer calling
alloc_skb which may release the chan lock and reacquire later which
makes it possible that the chan is disconnected in the meantime.

Fixes: a6a5568c03c4 ("Bluetooth: Lock the L2CAP channel when sending")
Reported-by: Alexander Coffin <alex.coffin@matician.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

OPP: fix error checking in opp_migrate_dentry()

[ Upstream commit eca4c0eea53432ec4b711b2a8ad282cbad231b4f ]

Since commit ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.

Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tap: tap_open(): correctly initialize socket uid

[ Upstream commit 66b2c338adce580dfce2199591e65e2bab889cff ]

sock_init_data() assumes that the `struct socket` passed in input is
contained in a `struct socket_alloc` allocated with sock_alloc().
However, tap_open() passes a `struct socket` embedded in a `struct
tap_queue` allocated with sk_alloc().
This causes a type confusion when issuing a container_of() with
SOCK_INODE() in sock_init_data() which results in assigning a wrong
sk_uid to the `struct sock` in input.
On default configuration, the type confused field overlaps with
padding bytes between `int vnet_hdr_sz` and `struct tap_dev __rcu
*tap` in `struct tap_queue`, which makes the uid of all tap sockets 0,
i.e., the root one.
Fix the assignment by using sock_init_data_uid().

Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tun: tun_chr_open(): correctly initialize socket uid

[ Upstream commit a096ccca6e503a5c575717ff8a36ace27510ab0a ]

sock_init_data() assumes that the `struct socket` passed in input is
contained in a `struct socket_alloc` allocated with sock_alloc().
However, tun_chr_open() passes a `struct socket` embedded in a `struct
tun_file` allocated with sk_alloc().
This causes a type confusion when issuing a container_of() with
SOCK_INODE() in sock_init_data() which results in assigning a wrong
sk_uid to the `struct sock` in input.
On default configuration, the type confused field overlaps with the
high 4 bytes of `struct tun_struct __rcu *tun` of `struct tun_file`,
NULL at the time of call, which makes the uid of all tun sockets 0,
i.e., the root one.
Fix the assignment by using sock_init_data_uid().

Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add sock_init_data_uid()

[ Upstream commit 584f3742890e966d2f0a1f3c418c9ead70b2d99e ]

Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().

Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/vmem: fix empty page tables cleanup under KASAN

[ Upstream commit 108303b0a2d27cb14eed565e33e64ad9eefe5d7e ]

Commit b9ff81003cf1 ("s390/vmem: cleanup empty page tables") introduced
empty page tables cleanup in vmem code, but when the kernel is built
with KASAN enabled the code has no effect due to wrong KASAN shadow
memory intersection condition, which effectively ignores any memory
range below KASAN shadow. Fix intersection condition to make code
work as anticipated.

Fixes: b9ff81003cf1 ("s390/vmem: cleanup empty page tables")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mem_detect: fix detect_memory() error handling

[ Upstream commit 3400c35a4090704e6c465449616ab7e67a9209e7 ]

Currently if for some reason sclp_early_read_info() fails,
sclp_early_get_memsize() will not set max_physmem_end and it
will stay uninitialized. Any garbage value other than 0 will lead
to detect_memory() taking wrong path or returning a garbage value
as max_physmem_end. To avoid that simply initialize max_physmem_end.

Fixes: 73045a08cf55 ("s390: unify identity mapping limits handling")
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe

[ Upstream commit 02298b7bae12936ca313975b02e7f98b06670d37 ]

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: cd844b0715ce ("irqchip/ti-sci-intr: Add support for Interrupt Router driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102085611.3955984-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe

[ Upstream commit 9419e700021a393f67be36abd0c4f3acc6139041 ]

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: a68a63cb4dfc ("irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102084208.3951758-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains

[ Upstream commit 071d068b89e95d1b078aa6bbcb9d0961b77d6aa1 ]

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: e6b78f2c3e14 ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102082811.3947760-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip: Fix refcount leak in platform_irqchip_probe

[ Upstream commit 6caa5a2b78f5f53c433d3a3781e53325da22f0ac ]

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: f8410e626569 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230102121318.3990586-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Enhance debug print in page allocation failure

[ Upstream commit 7eef93003e5d20e1a6a6e59e12d914b5431cbda2 ]

Provide more details to aid debugging.

Fixes: bf0bf77f6519 ("mlx5: Support communicating arbitrary host page size to firmware")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Majd Dibbiny <majd@nvidia.com>
Signed-off-by: Jack Morgenstein <jackm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix polling firmware-own status

[ Upstream commit 71bb496ce17f6976c8a75b054861781965b07ac0 ]

Check the register status bit instead of the trigger bit

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: profile online CPUs instead of possible

[ Upstream commit 377c16fa3f3c60d21e4b05314c8be034ce37f2eb ]

The number of online cpu may be not equal to possible cpu.
"bpftool prog profile" can not create pmu event on possible
but on online cpu.

$ dmidecode -s system-product-name
PowerEdge R620
$ cat /sys/devices/system/cpu/possible
0-47
$ cat /sys/devices/system/cpu/online
0-31

Disable cpu dynamically:
$ echo 0 > /sys/devices/system/cpu/cpuX/online

If one cpu is offline, perf_event_open will return ENODEV.
To fix this issue:
* check value returned and skip offline cpu.
* close pmu_fd immediately on error path, avoid fd leaking.

Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230202131701.29519-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware

[ Upstream commit 46a334a98f585ef78d51d8f5736596887bdd7f54 ]

Perform a cache flush on the SEV-ES TMR memory after allocation to prevent
any possibility of the firmware encountering an error should dirty cache
lines be present. Use clflush_cache_range() to flush the SEV-ES TMR memory.

Fixes: 97f9ac3db661 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Refactor out sev_fw_alloc()

[ Upstream commit cc17982d58d1e67eab831e7023ede999dda56173 ]

Create a helper function sev_fw_alloc() which can be used to allocate
aligned memory regions for use by the PSP firmware. Currently only used
for the SEV-ES TMR region but will be used for the SEV_INIT_EX NV memory
region.

Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 46a334a98f58 ("crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware")
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: led-class: Add missing put_device() to led_put()

[ Upstream commit 445110941eb94709216363f9d807d2508e64abd7 ]

led_put() is used to "undo" a successful of_led_get() call,
of_led_get() uses class_find_device_by_of_node() which returns
a reference to the device which must be free-ed with put_device()
when the caller is done with it.

Add a put_device() call to led_put() to free the reference returned
by class_find_device_by_of_node().

And also add a put_device() in the error-exit case of try_module_get()
failing.

Fixes: 699a8c7c4bd3 ("leds: Add of_led_get() and led_put()")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120114524.408368-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: xts - Handle EBUSY correctly

[ Upstream commit 51c082514c2dedf2711c99d93c196cc4eedceb40 ]

As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.

However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.

Fixes: 8083b1bf8163 ("crypto: xts - add support for ciphertext stealing")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Adjust late loading result reporting message

[ Upstream commit 6eab3abac7043226e5375e9ead0c7607ced6767b ]

During late microcode loading, the "Reload completed" message is issued
unconditionally, regardless of success or failure.

Adjust the message to report the result of the update.

[ bp: Massage. ]

Fixes: 9bd681251b7c ("x86/microcode: Announce reload operation's completion")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/lkml/874judpqqd.ffs@tglx/
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Check CPU capabilities after late microcode update correctly

[ Upstream commit c0dd9245aa9e25a697181f6085692272c9ec61bc ]

The kernel caches each CPU's feature bits at boot in an x86_capability[]
structure. However, the capabilities in the BSP's copy can be turned off
as a result of certain command line parameters or configuration
restrictions, for example the SGX bit. This can cause a mismatch when
comparing the values before and after the microcode update.

Another example is X86_FEATURE_SRBDS_CTRL which gets added only after
microcode update:

#  --- cpuid.before 2023-01-21 14:54:15.652000747 +0100
#  +++ cpuid.after 2023-01-21 14:54:26.632001024 +0100
#  @@ -10,7 +10,7 @@ CPU:
#      0x00000004 0x04: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
#      0x00000005 0x00: eax=0x00000040 ebx=0x00000040 ecx=0x00000003 edx=0x11142120
#      0x00000006 0x00: eax=0x000027f7 ebx=0x00000002 ecx=0x00000001 edx=0x00000000
#  -   0x00000007 0x00: eax=0x00000000 ebx=0x029c6fbf ecx=0x40000000 edx=0xbc002400
#  +   0x00000007 0x00: eax=0x00000000 ebx=0x029c6fbf ecx=0x40000000 edx=0xbc002e00
        ^^^

and which proves for a gazillionth time that late loading is a bad bad
idea.

microcode_check() is called after an update to report any previously
cached CPUID bits which might have changed due to the update.

Therefore, store the cached CPU caps before the update and compare them
with the CPU caps after the microcode update has succeeded.

Thus, the comparison is done between the CPUID *hardware* bits before
and after the upgrade instead of using the cached, possibly runtime
modified values in BSP's boot_cpu_data copy.

As a result, false warnings about CPUID bits changes are avoided.

  [ bp:
   - Massage.
- Add SRBDS_CTRL example.
- Add kernel-doc.
- Incorporate forgotten review feedback from dhansen.
]

Fixes: 1008c52c09dc ("x86/CPU: Add a microcode loader callback")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230109153555.4986-3-ashok.raj@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Add a parameter to microcode_check() to store CPU capabilities

[ Upstream commit ab31c74455c64e69342ddab21fd9426fcbfefde7 ]

Add a parameter to store CPU capabilities before performing a microcode
update so that CPU capabilities can be compared before and after update.

[ bp: Massage. ]

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230109153555.4986-2-ashok.raj@intel.com
Stable-dep-of: c0dd9245aa9e ("x86/microcode: Check CPU capabilities after late microcode update correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Print previous version of microcode after reload

[ Upstream commit 7fce8d6eccbc31a561d07c79f359ad09f0424347 ]

Print both old and new versions of microcode after a reload is complete
because knowing the previous microcode version is sometimes important
from a debugging perspective.

[ bp: Massage commit message. ]

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20220829181030.722891-1-ashok.raj@intel.com
Stable-dep-of: c0dd9245aa9e ("x86/microcode: Check CPU capabilities after late microcode update correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Default-disable late loading

[ Upstream commit a77a94f86273ce42a39cb479217dd8d68acfe0ff ]

It is dangerous and it should not be used anyway - there's a nice early
loading already.

Requested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220525161232.14924-3-bp@alien8.de
Stable-dep-of: c0dd9245aa9e ("x86/microcode: Check CPU capabilities after late microcode update correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Rip out the OLD_INTERFACE

[ Upstream commit 181b6f40e9ea80c76756d4d0cdeed396016c487e ]

Everything should be using the early initrd loading by now.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220525161232.14924-2-bp@alien8.de
Stable-dep-of: c0dd9245aa9e ("x86/microcode: Check CPU capabilities after late microcode update correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: Mark stop_this_cpu() __noreturn

[ Upstream commit f9cdf7ca57cada055f61ef6d0eb4db21c3f200db ]

vmlinux.o: warning: objtool: smp_stop_nmi_callback()+0x2b: unreachable instruction

0000 0000000000047cf0 <smp_stop_nmi_callback>:
...
0026 47d16: e8 00 00 00 00 call 47d1b <smp_stop_nmi_callback+0x2b> 47d17: R_X86_64_PLT32 stop_this_cpu-0x4
002b 47d1b: b8 01 00 00 00 mov $0x1,%eax

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.290905453@infradead.org
Stable-dep-of: c0dd9245aa9e ("x86/microcode: Check CPU capabilities after late microcode update correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>

powercap: fix possible name leak in powercap_register_zone()

[ Upstream commit 1b6599f741a4525ca761ecde46e5885ff1e6ba58 ]

In the error path after calling dev_set_name(), the device
name is leaked. To fix this, calling dev_set_name() before
device_register(), and call put_device() if it returns error.

All the resources is released in powercap_release(), so it
can return from powercap_register_zone() directly.

Fixes: 75d2364ea0ca ("PowerCap: Add class driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: seqiv - Handle EBUSY correctly

[ Upstream commit 32e62025e5e52fbe4812ef044759de7010b15dbc ]

As it is seqiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.

However, as the caller of seqiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.

Fixes: 0a270321dbf9 ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: essiv - Handle EBUSY correctly

[ Upstream commit b5a772adf45a32c68bef28e60621f12617161556 ]

As it is essiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.

However, as the caller of essiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.

Fixes: be1eb7f78aa8 ("crypto: essiv - create wrapper template...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Failure on re-initialization due to duplicate sysfs filename

[ Upstream commit 299bf602b3f92f1456aef59c6413591fb02e762a ]

The following warning appears during the CCP module re-initialization:

[  140.965403] sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:07.1/0000:03:00.2/dma/dma0chan0'
[  140.975736] CPU: 0 PID: 388 Comm: kworker/0:2 Kdump: loaded Not
tainted 6.2.0-0.rc2.18.eln124.x86_64 #1
[  140.985185] Hardware name: HPE ProLiant DL325 Gen10/ProLiant DL325
Gen10, BIOS A41 07/17/2020
[  140.993761] Workqueue: events work_for_cpu_fn
[  140.998151] Call Trace:
[  141.000613]  <TASK>
[  141.002726]  dump_stack_lvl+0x33/0x46
[  141.006415]  sysfs_warn_dup.cold+0x17/0x23
[  141.010542]  sysfs_create_dir_ns+0xba/0xd0
[  141.014670]  kobject_add_internal+0xba/0x260
[  141.018970]  kobject_add+0x81/0xb0
[  141.022395]  device_add+0xdc/0x7e0
[  141.025822]  ? complete_all+0x20/0x90
[  141.029510]  __dma_async_device_channel_register+0xc9/0x130
[  141.035119]  dma_async_device_register+0x19e/0x3b0
[  141.039943]  ccp_dmaengine_register+0x334/0x3f0 [ccp]
[  141.045042]  ccp5_init+0x662/0x6a0 [ccp]
[  141.049000]  ? devm_kmalloc+0x40/0xd0
[  141.052688]  ccp_dev_init+0xbb/0xf0 [ccp]
[  141.056732]  ? __pci_set_master+0x56/0xd0
[  141.060768]  sp_init+0x70/0x90 [ccp]
[  141.064377]  sp_pci_probe+0x186/0x1b0 [ccp]
[  141.068596]  local_pci_probe+0x41/0x80
[  141.072374]  work_for_cpu_fn+0x16/0x20
[  141.076145]  process_one_work+0x1c8/0x380
[  141.080181]  worker_thread+0x1ab/0x380
[  141.083953]  ? __pfx_worker_thread+0x10/0x10
[  141.088250]  kthread+0xda/0x100
[  141.091413]  ? __pfx_kthread+0x10/0x10
[  141.095185]  ret_from_fork+0x2c/0x50
[  141.098788]  </TASK>
[  141.100996] kobject_add_internal failed for dma0chan0 with -EEXIST,
don't try to register things with the same name in the same directory.
[  141.113703] ccp 0000:03:00.2: ccp initialization failed

The /dma/dma0chan0 sysfs file is not removed since dma_chan object
has been released in ccp_dma_release() before releasing dma device.
A correct procedure would be: release dma channels first => unregister
dma device => release ccp dma object.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216888
Fixes: 68dbe80f5b51 ("crypto: ccp - Release dma channels before dmaengine unrgister")
Tested-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: battery: Fix missing NUL-termination with large strings

[ Upstream commit f2ac14b5f197e4a2dec51e5ceaa56682ff1592bc ]

When encountering a string bigger than the destination buffer (32 bytes),
the string is not properly NUL-terminated, causing buffer overreads later.

This for example happens on the Inspiron 3505, where the battery
model name is larger than 32 bytes, which leads to sysfs showing
the model name together with the serial number string (which is
NUL-terminated and thus prevents worse).

Fix this by using strscpy() which ensures that the result is
always NUL-terminated.

Fixes: 106449e870b3 ("ACPI: Battery: Allow extract string from integer")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()

[ Upstream commit df4969ca135b9b3b2c38c07514aaa775112ac835 ]

The extended KCK key length check wrongly using the KEK key attribute
for validation. Due to this GTK rekey offload is failing when the KCK
key length is 24 bytes even though the driver advertising
WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK flag. Use correct attribute to fix the
same.

Fixes: 093a48d2aa4b ("cfg80211: support bigger kek/kck key length")
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20221206143715.1802987-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup

[ Upstream commit ed3f83b3459a67a3ab9d806490ac304b567b1c2d ]

crypto_alloc_shash() allocates resources, which should be released by
crypto_free_shash(). When ath11k_peer_find() fails, there has memory
leak. Add missing crypto_free_shash() to fix this.

Fixes: 243874c64c81 ("ath11k: handle RX fragments")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230102081142.3937570-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()

[ Upstream commit 8a2f35b9830692f7a616f2f627f943bc748af13a ]

Fix a stack-out-of-bounds write that occurs in a WMI response callback
function that is called after a timeout occurs in ath9k_wmi_cmd().
The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that
could no longer be valid when a timeout occurs. Set wmi->last_seq_id to
0 when a timeout occurred.

Found by a modified version of syzkaller.

BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx
Write of size 4
Call Trace:
memcpy
ath9k_wmi_ctrl_rx
ath9k_htc_rx_msg
ath9k_hif_usb_reg_in_cb
__usb_hcd_giveback_urb
usb_hcd_giveback_urb
dummy_timer
call_timer_fn
run_timer_softirq
__do_softirq
irq_exit_rcu
sysvec_apic_timer_interrupt

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104124130.10996-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails

[ Upstream commit 0af54343a76263a12dbae7fafb64eb47c4a6ad38 ]

Syzkaller detected a memory leak of skbs in ath9k_hif_usb_rx_stream().
While processing skbs in ath9k_hif_usb_rx_stream(), the already allocated
skbs in skb_pool are not freed if ath9k_hif_usb_rx_stream() fails. If we
have an incorrect pkt_len or pkt_tag, the input skb is considered invalid
and dropped. All the associated packets already in skb_pool should be
dropped and freed. Added a comment describing this issue.

The patch also makes remain_skb NULL after being processed so that it
cannot be referenced after potential free. The initialization of hif_dev
fields which are associated with remain_skb (rx_remain_len,
rx_transfer_len and rx_pad_len) is moved after a new remain_skb is
allocated.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 6ce708f54cc8 ("ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream")
Fixes: 44b23b488d44 ("ath9k: hif_usb: Reduce indent 1 column")
Reported-by: syzbot+e9632e3eb038d93d6bc6@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104123615.51511-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: htc: clean up statistics macros

[ Upstream commit d7fc76039b74ad37b7056d5607b05d7cb31a5404 ]

I've changed *STAT_* macros a bit in previous patch and I seems like
they become really unreadable. Align these macros definitions to make
code cleaner and fix folllowing checkpatch warning

ERROR: Macros with complex values should be enclosed in parentheses

Also, statistics macros now accept an hif_dev as argument, since
macros that depend on having a local variable with a magic name
don't abide by the coding style.

No functional change

Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/ebb2306d06a496cd1b032155ae52fdc5fa8cc2c5.1655145743.git.paskripkin@gmail.com
Stable-dep-of: 0af54343a762 ("wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: hif_usb: simplify if-if to if-else

[ Upstream commit 2950833f10cfa601813262e1d9c8473f9415681b ]

Use if and else instead of if(A) and if (!A).

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220424094441.104937-1-wanjiabing@vivo.com
Stable-dep-of: 0af54343a762 ("wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function

[ Upstream commit 9b25e3985477ac3f02eca5fc1e0cc6850a3f7e69 ]

It is stated that ath9k_htc_rx_msg() either frees the provided skb or
passes its management to another callback function. However, the skb is
not freed in case there is no another callback function, and Syzkaller was
able to cause a memory leak. Also minor comment fix.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+e008dccab31bd3647609@syzkaller.appspotmail.com
Reported-by: syzbot+6692c72009680f7c4eb2@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230104123546.51427-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: orinoco: check return value of hermes_write_wordrec()

[ Upstream commit 1e346cbb096a5351a637ec1992beffbf330547f0 ]

There is currently no return check for writing an authentication
type (HERMES_AUTH_SHARED_KEY or HERMES_AUTH_OPEN). It looks like
it was accidentally skipped.

This patch adds a return check similar to the other checks in
__orinoco_hw_setup_enc() for hermes_write_wordrec().

Detected using the static analysis tool - Svace.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221227133306.201356-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU

[ Upstream commit b39f662ce1648db0b9de32e6a849b098480793cb ]

The wifi + bluetooth combo chip RTL8723BU can leak memory (especially?)
when it's connected to a bluetooth audio device. The busy bluetooth
traffic generates lots of C2H (card to host) messages, which are not
freed correctly.

To fix this, move the dev_kfree_skb() call in rtl8xxxu_c2hcmd_callback()
inside the loop where skb_dequeue() is called.

The RTL8192EU leaks memory because the C2H messages are added to the
queue and left there forever. (This was fine in the past because it
probably wasn't sending any C2H messages until commit e542e66b7c2e
("wifi: rtl8xxxu: gen2: Turn on the rate control"). Since that commit
it sends a C2H message when the TX rate changes.)

To fix this, delete the check for rf_paths > 1 and the goto. Let the
function process the C2H messages from RTL8192EU like the ones from
the other chips.

Theoretically the RTL8188FU could also leak like RTL8723BU, but it
most likely doesn't send C2H messages frequently enough.

This change was tested with RTL8723BU by Erhard F. I tested it with
RTL8188FU and RTL8192EU.

Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215197
Fixes: e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/03b099c1-c671-d252-36f4-57b70d721f9d@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/tsens: limit num_sensors to 9 for msm8939

[ Upstream commit 903238a33c116edf5f64f7a3fd246e6169cccfa6 ]

On msm8939 last (hwid=10) sensor was added in the hw revision 3.0.
Calibration data for it was placed outside of the main calibration data
blob, so it is not accessible by the current blob-parsing code.

Moreover data for the sensor's p2 is not contiguous in the fuses. This
makes it hard to use nvmem_cell API to parse calibration data in a
generic way.

Since the sensor doesn't seem to be actually used by the existing
hardware, disable the sensor for now.

Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/tsens: fix slope values for msm8939

[ Upstream commit 5aec3b035e0cbf3f042c2a03d654e5ad6748feb7 ]

According to the vendor kernels (msm-3.10, 3.14 and 3.18), msm8939
uses non-standard slope values for calibrating the sensors. Fill them
accordingly.

Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-8-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/tsens: Sort out msm8976 vs msm8956 data

[ Upstream commit a7d3006be5ca7b04e4b84b5ceaae55a700e511bd ]

Tsens driver mentions that msm8976 data should be used for both msm8976
and msm8956 SoCs. This is not quite correct, as according to the
vendor kernels, msm8976 should use standard slope values (3200), while
msm8956 really uses the slope values found in the driver.

Add separate compatibility string for msm8956, move slope value
overrides to the corresponding init function and use the standard
compute_intercept_slope() function for both platforms.

Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-7-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/tsens: Add compat string for the qcom,msm8960

[ Upstream commit 2caf73969de6675318a711d0622406c8c66afc03 ]

On apq8064 (msm8960) platforms the tsens device is created manually by
the gcc driver. Prepare the tsens driver for the qcom,msm8960-tsens
device instantiated from the device tree.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220406002648.393486-3-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Stable-dep-of: a7d3006be5ca ("thermal/drivers/tsens: Sort out msm8976 vs msm8956 data")
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/tsens: Drop msm8976-specific defines

[ Upstream commit 3bf0ea99e2e32b0335106b86d84404cc85bcd113 ]

Drop msm8976-specific defines, which duplicate generic ones.

Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-6-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: nsrepair: handle cases without a return value correctly

[ Upstream commit ca843a4c79486e99a19b859ef0b9887854afe146 ]

Previously acpi_ns_simple_repair() would crash if expected_btypes
contained any combination of ACPI_RTYPE_NONE with a different type,
e.g | ACPI_RTYPE_INTEGER because of slightly incorrect logic in the
!return_object branch, which wouldn't return AE_AML_NO_RETURN_VALUE
for such cases.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Link: https://github.com/acpica/acpica/pull/811
Fixes: 61db45ca2163 ("ACPICA: Restore code that repairs NULL package elements in return values.")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2

[ Upstream commit 91dfd98216d817ec5f1c55890bacb7b4fe9b068a ]

For SEV_GET_ID2, the user provided length does not have a specified
limitation because the length of the ID may change in the future. The
kernel memory allocation, however, is implicitly limited to 4MB on x86 by
the page allocator, otherwise the kzalloc() will fail.

When this happens, it is best not to spam the kernel log with the warning.
Simply fail the allocation and return ENOMEM to the user.

Fixes: d6112ea0cb34 ("crypto: ccp - introduce SEV_GET_ID2 command")
Reported-by: Andy Nguyen <theflow@google.com>
Reported-by: Peter Gonda <pgonda@google.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/mpi: Fix buffer overrun when SG is too long

[ Upstream commit 7361d1bc307b926cbca214ab67b641123c2d6357 ]

The helper mpi_read_raw_from_sgl sets the number of entries in
the SG list according to nbytes. However, if the last entry
in the SG list contains more data than nbytes, then it may overrun
the buffer because it only allocates enough memory for nbytes.

Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers")
Reported-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()

[ Upstream commit 28319d6dc5e2ffefa452c2377dd0f71621b5bff0 ]

RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:

1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
   that every subsequent child of TASK A will belong to. But TASK A
   doesn't itself belong to that new PID namespace.

2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
   namespace (let's say PID_NS1) and TASK B is the first task belonging
   to the new PID namespace created by unshare()  (let's call it PID_NS2).

3) Since TASK B is the first task attached to PID_NS2, it becomes the
   PID_NS2 child reaper.

4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
   Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
   TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.

5) TASK B exits and since it is the child reaper for PID_NS2, it has to
   kill all other tasks attached to PID_NS2, and wait for all of them to
   die before getting reaped itself (zap_pid_ns_process()).

6) TASK A calls synchronize_rcu_tasks() which leads to
   synchronize_srcu(&tasks_rcu_exit_srcu).

7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
   tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
   exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.

8) TASK C exits and since TASK A is its parent, it waits for it to reap
   TASK C, but it can't because TASK A waits for TASK B that waits for
   TASK C.

Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.

The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.

[ paulmck: Fix build failure by adding additional declaration. ]

Fixes: 3f95aa81d265 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls

[ Upstream commit 44757092958bdd749775022f915b7ac974384c2a ]

Ever since the following commit:

5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()")

SRCU doesn't rely anymore on preemption to be disabled in order to
modify the per-CPU counter. And even then it used to be done from the API
itself.

Therefore and after checking further, it appears to be safe to remove
the preemption disablement around __srcu_read_[un]lock() in
exit_tasks_rcu_start() and exit_tasks_rcu_finish()

Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose

[ Upstream commit e4e1e8089c5fd948da12cb9f4adc93821036945f ]

Make sure we don't need to look again into the depths of git blame in
order not to miss a subtle part about how rcu-tasks is dealing with
exiting tasks.

Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>